The Library
3D phase contrast MRI in models of human airways : validation of computational fluid dynamics simulations of steady inspiratory flow
Tools
Collier, Guilhem J., Kim, Minsuok, Chung, Yongmann M. and Wild, Jim M. (2018) 3D phase contrast MRI in models of human airways : validation of computational fluid dynamics simulations of steady inspiratory flow. Journal of Magnetic Resonance Imaging, 48 (5). pp. 1400-1409. doi:10.1002/jmri.26039 ISSN 1053-1807.
|
PDF
WRAP-3D-phase-contrast-MRI-models-human-airways-Chung-2018.pdf - Accepted Version - Requires a PDF viewer. Download (1487Kb) | Preview |
Official URL: http://dx.doi.org/10.1002/jmri.26039
Abstract
Background:
Knowledge of airflow patterns in the large airways is of interest in obstructive airways disease and in the development of inhaled therapies. Computational fluid dynamics (CFD) simulations are used to study airflow in realistic airway models but usually need experimental validation.
Purpose:
To develop MRI‐based methods to study airway flow in realistic 3D‐printed models.
Study Type:
Case control.
Phantom:
Two 3D‐printed lung models.
Field Strength/Sequence:
1.5–3T, flow MRI.
Assessment:
Two human airway models, respectively including and excluding the oral cavity and upper airways derived from MR and CT imaging, were 3D‐printed. 3D flow MRI was performed at different flow conditions corresponding to slow and steady airflow inhalation rates. Water was used as the working fluid to mimic airflow. Dynamic acquisition of 1D velocity profiles was also performed at different locations in the trachea to observe variability during nonsteady conditions.
Statistical Tests:
Linear regression analysis to compare both flow velocity fields and local flow rates from CFD simulations and experimental measurement with flow MRI.
Results:
A good agreement was obtained between 3D velocity maps measured with flow MRI and predicted by CFD simulations, with linear regression R‐squared values ranging from 0.39 to 0.94 when performing a pixel‐by‐pixel comparison of each velocity component. The flow distribution inside the lung models was also similar, with average slope and R‐squared values of 0.96 and 0.99, respectively, when comparing local flow rates assessed at different branching locations. In the model including the upper airways, a turbulent laryngeal jet flow was observed with both methods and affected remarkably the velocity profiles in the trachea.
Data Conclusion:
We propose flow MRI using water as a surrogate fluid to air, as a validation tool for CFD simulations of airflow in geometrically realistic models of the human airways.
Level of Evidence: 3
Technical Efficacy: Stage 2
Item Type: | Journal Article | ||||||||
---|---|---|---|---|---|---|---|---|---|
Subjects: | R Medicine > RC Internal medicine T Technology > TA Engineering (General). Civil engineering (General) |
||||||||
Divisions: | Faculty of Science, Engineering and Medicine > Engineering > Engineering | ||||||||
Library of Congress Subject Headings (LCSH): | Computational fluid dynamics, Magnetic resonance imaging, Phase contrast magnetic resonance imaging, Airway (Medicine) -- Imaging, Three-dimensional printing, Lungs | ||||||||
Journal or Publication Title: | Journal of Magnetic Resonance Imaging | ||||||||
Publisher: | John Wiley & Sons | ||||||||
ISSN: | 1053-1807 | ||||||||
Official Date: | November 2018 | ||||||||
Dates: |
|
||||||||
Volume: | 48 | ||||||||
Number: | 5 | ||||||||
Page Range: | pp. 1400-1409 | ||||||||
DOI: | 10.1002/jmri.26039 | ||||||||
Status: | Peer Reviewed | ||||||||
Publication Status: | Published | ||||||||
Reuse Statement (publisher, data, author rights): | This is the pre-peer reviewed version of the following article: Collier, G. J., Kim, M. , Chung, Y. and Wild, J. M. (2018), 3D phase contrast MRI in models of human airways: Validation of computational fluid dynamics simulations of steady inspiratory flow. J. Magn. Reson. Imaging. . doi:10.1002/jmri.26039, which has been published in final form at https://doi.org/10.1002/jmri.26039. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions | ||||||||
Access rights to Published version: | Restricted or Subscription Access | ||||||||
Date of first compliant deposit: | 10 August 2018 | ||||||||
Date of first compliant Open Access: | 6 April 2019 |
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |
Downloads
Downloads per month over past year