The Library
Calcium-containing inorganic polymers as potential bioactive materials
Tools
Tools
Tools
MacKenzie, Kenneth J. D., Rahner, Nils, Smith, Mark E. and Wong, Alan (2010) Calcium-containing inorganic polymers as potential bioactive materials. Journal of Materials Science, Vol.45 (No.4). pp. 999-1007. doi:10.1007/s10853-009-4031-5
Research output not available from this repository, contact author.
Official URL: http://dx.doi.org/10.1007/s10853-009-4031-5
Abstract
In vitro studies are reported of the behaviour of potassium aluminosilicate inorganic polymers containing 10 wt% Ca(OH)(2), nanostructured calcium silicate and Ca-3(PO4)(2) exposed to simulated body fluid (SBF). Heating to 600 A degrees C lowers the alkalinity of Ca-3(PO4)(2)-containing samples, but their X-ray powder diffraction characteristics, Al-27, Si-29 and Ca-43 MAS NMR spectra are unchanged by heating. Exposure of the heated compounds to SBF usually results in the formation of the crystalline biomineral phases hydroxylapatite and hydroxycarbonate apatite in the samples containing Ca(OH)(2) and Ca-3(PO4)(2), but scanning electron microscopy/energy dispersive spectroscopy suggests that all the samples in the present study form calcium phosphates on exposure to SBF. This conclusion is also consistent with the removal of P from the SBF by all the samples. The concentrations of Al leached from the samples containing nanostructured calcium silicate and Ca-3(PO4)(2) (0.05 and 0.47 ppm, respectively) are acceptable for biomaterials use, but apart from the Ca-3(PO4)(2)-containing sample, which takes up Ca from the SBF, the levels of Ca released into the SBF by the other samples are well in excess of the published optimum amount for stimulation of new bone growth by gene transcription in osteoblasts. Only the calcium silicate-containing samples release Si into the SBF, but in a concentration that falls short of the optimum amount. The strength of all the present compounds after heating is probably adequate for applications as biomaterials, but the Ca-3(PO4)(2)-containing compound shows slightly greater strength. Thus, on balance, the Ca-3(PO4)(2)-containing compound appears to be the most promising as a bioactive material.
| Item Type: | Journal Article | ||||
|---|---|---|---|---|---|
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) | ||||
| Divisions: | Faculty of Science > Physics | ||||
| Journal or Publication Title: | Journal of Materials Science | ||||
| Publisher: | Springer | ||||
| ISSN: | 0022-2461 | ||||
| Official Date: | February 2010 | ||||
| Dates: |
|
||||
| Volume: | Vol.45 | ||||
| Number: | No.4 | ||||
| Number of Pages: | 9 | ||||
| Page Range: | pp. 999-1007 | ||||
| DOI: | 10.1007/s10853-009-4031-5 | ||||
| Status: | Peer Reviewed | ||||
| Publication Status: | Published | ||||
| Access rights to Published version: | Restricted or Subscription Access | ||||
| Funder: | University of Warwick, Engineering and Physical Sciences Research Council (EPSRC), Advantage West Midlands (AWM), European Regional Development Fund (ERDF), NSERC |
Data sourced from Thomson Reuters' Web of Knowledge
Request changes or add full text files to a record
Repository staff actions (login required)
 |
View Item |
