The Library
Friction and wear behaviour of acetal and nylon gears
Tools
Mao, Ken, Li, W., Hooke, C. J. and Walton, D. (2009) Friction and wear behaviour of acetal and nylon gears. Wear, Vol.267 (No.1-4 Part 1 Sp. Iss. SI). pp. 639-645. doi:10.1016/j.wear.2008.10.005 ISSN 0043-1648.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Official URL: http://dx.doi.org/10.1016/j.wear.2008.10.005
Abstract
The current paper will present an extensive investigation of polymer gear (acetal and nylon) friction and wear behaviour. First, a unique test method for polymer gear wear will be described in brief and later used in the extensive investigation of acetal and nylon gear wear. Initial tests were performed using acetal pinions with acetal gears, and nylon pinions with nylon gears, with further investigation carried out using dissimilar polymer gears. In this case the driver and driven effects on the gear wear behaviour was also considered when dissimilar materials were used. For acetal against acetal gears, it was found that the acetal gear wear rate increased dramatically when the load reached a critical value for a specific geometry and the gear surface showed slow wear, with a low specific wear rate if the gear was loaded below this critical value. It was found that the surface temperature was the dominant factor influencing the wear rate and an initial relationship between gear surface temperature and gear load capacity has been established and further developed. Experimental investigation on nylon gears was also carried out and different failures have been found compared to acetal gears, such as gear root and pitch fractures. The most interesting observation from the experimental work is the significant difference in wear behaviour when running acteal against nylon gears, especially the low wear rate when acetal is used as the driver gear.
The current paper will present an extensive investigation of polymer gear (acetal and nylon) friction and wear behaviour. First, a unique test method for polymer gear wear will be described in brief and later used in the extensive investigation of acetal and nylon gear wear. Initial tests were performed using acetal pinions with acetal gears, and nylon pinions with nylon gears, with further investigation carried out using dissimilar polymer gears. In this case the driver and driven effects on the gear wear behaviour was also considered when dissimilar materials were used. For acetal against acetal gears, it was found that the acetal gear wear rate increased dramatically when the load reached a critical value for a specific geometry and the gear surface showed slow wear, with a low specific wear rate if the gear was loaded below this critical value. It was found that the surface temperature was the dominant factor influencing the wear rate and an initial relationship between gear surface temperature and gear load capacity has been established and further developed. Experimental investigation on nylon gears was also carried out and different failures have been found compared to acetal gears, such as gear root and pitch fractures. The most interesting observation from the experimental work is the significant difference in wear behaviour when running acteal against nylon gears, especially the low wear rate when acetal is used as the driver gear. Crown Copyright (C) 2009 Published by Elsevier B.V. All rights reserved.
Item Type: | Journal Article | ||||
---|---|---|---|---|---|
Subjects: | T Technology > TJ Mechanical engineering and machinery T Technology > TA Engineering (General). Civil engineering (General) |
||||
Divisions: | Faculty of Science, Engineering and Medicine > Engineering > Engineering | ||||
Library of Congress Subject Headings (LCSH): | Friction, Mechanical wear, Gearing, Gearing -- Testing, Polymers, Tribology | ||||
Journal or Publication Title: | Wear | ||||
Publisher: | Elsevier BV | ||||
ISSN: | 0043-1648 | ||||
Official Date: | 15 June 2009 | ||||
Dates: |
|
||||
Volume: | Vol.267 | ||||
Number: | No.1-4 Part 1 Sp. Iss. SI | ||||
Number of Pages: | 7 | ||||
Page Range: | pp. 639-645 | ||||
DOI: | 10.1016/j.wear.2008.10.005 | ||||
Status: | Peer Reviewed | ||||
Publication Status: | Published | ||||
Access rights to Published version: | Restricted or Subscription Access | ||||
Version or Related Resource: | This item was also presented at the 17th International Conference on Wear of Materials, Las Vegas, NV, U.S.A., Apr 19-23, 2009. | ||||
Title of Event: | 17th International Conference on Wear of Materials | ||||
Location of Event: | Las Vegas, NV | ||||
Date(s) of Event: | APR 19-23, 2009 |
Data sourced from Thomson Reuters' Web of Knowledge
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |