The effect of elevated temperature curing treatment on the compression strength of composites with polyester resin matrix and quartz filler
Ateş, Ergun and Barnes, Stuart. (2012) The effect of elevated temperature curing treatment on the compression strength of composites with polyester resin matrix and quartz filler. Materials & Design, Vol.34 . pp. 435-443. ISSN 0264-1275Full text not available from this repository.
Official URL: http://dx.doi.org/10.1016/j.matdes.2011.08.042
In this study, polyester resin and quartz are used as binding and filling materials. In accordance with different aggregate diagrams and binding rates designed on standard cement concrete grain-size curves, polymer concrete composite samples were prepared. Such samples were initially solidified at room temperature and then placed in an oven at 50 °C, 75 °C and 100 °C. The samples were then compression tested. As a result of the compression strength determination and analysis, it is observed that the elevated temperature treatments increased the compression strength. The highest compression strength is obtained in a temperature of 75 °C.
|Item Type:||Journal Article|
|Subjects:||Q Science > QD Chemistry
T Technology > TA Engineering (General). Civil engineering (General)
|Divisions:||Faculty of Science > WMG (Formerly the Warwick Manufacturing Group)|
|Library of Congress Subject Headings (LCSH):||Curing, Composite materials -- Effect of high temperatures on, Polymer-impregnated concrete -- Effect of high temperatures on, Polyesters -- Effect of high temperatures on, Quartz -- Effect of high temperatures on, Materials -- Compression testing, Strength of materials|
|Journal or Publication Title:||Materials & Design|
|Page Range:||pp. 435-443|
|Access rights to Published version:||Restricted or Subscription Access|
|References:|| Kreis R. Polymer concrete – a progressive building material. Int Polym Sci Tech 1991;18:69–74.  Krausse J. Reaktionsharzbeton als werkstoff für hochbeanspruchte maschinenteile, Darmstadt, München, Wien, Hanser; 1987.  Ohama Y. Polymer beton in Japan, recent development of polymer concrete in Japan, Stand der entwicklung, College of Engineering, Nihon University, Koriyama, Japan; 1982.  Czarnecki L. The status of polymer concrete. Concr Int Des Constr 1985;7(7):47–53.  Ohama Y. Recent progress in concrete polymer composites. Cem & Concr Compos 1997;5:31–40.  Fowler DW. Polymers in concrete – a vision for the 21st century. Cem & Concr Compos 1999;21:449–52.  Clifton JR, Czarnecki L, Garbacz A, Lukowski P. Optimization of polymer concrete composites, final report. National Institute of Standards and Technology, Gaithesburg, MD. 20899; 1999.  Renker HJ. Stone-based structural materials. Precis Eng 1985;7(3):161–4.  Soh YS, Jo YK, Park HS. Effect of fillers on the mechanical properties of unsaturated polyester resin mortar. In, Polymers in Concrete, E & FN Span, London; 1997. p. 67–74.  Rao VV, Lakshmi K, Krishnamoorthy S. Influence of resin and micro filler proportions on strength, density and shrinkage of polyester polymer concrete. ACI Struct J 1998;95:153–62.  Abdel-Jawad YA, Abdullah WS. Design of maximum density aggregate grading. Constr Build Mater 2002;16:495–508.  Mathukumar M, Mohan D, Rajendran M. Optimization of mix proportions of mineral aggregates using box behnken design of experiments. Cem & Concr Compos 2003;25(7):751–8.  Rao VV, Lakshmi K, Krishnamoorthy S. Influence of resin and micro filler proportions on strength, density and setting shrinkage of polyester polymer concrete. ACI Struct J 1998;95(2):153–62.  Nutt WO. Polymer concretes-the next stage. Concrete 1987;21(9):15–6 [London].  Haddad MU, Fowler DW, Paul DR. Factors affecting the curing and strength of polymer concrete. ACI J Tech Paper 1983;80–38:396–462.  Bisby Luke A, Green Mark F. Resistance to freezing and thawing of fibrereinforced polymer-concrete bond. ACI Struct J 2002;99(2):215–23.  Oyawa Walter O, Sugiura Kunitomo W. Flexural response of polymer concrete filled steel beams. Constr Build Mater 2004;18(6):367–76.  Sun P, Zhao Y, Luo Y, Sun L. Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fibre/bismaleimide (BMI) composite. Mater Des 2011;32:4341–7.  Gu H. Dynamic mechanical analysis of the seawater treated glass/polyester composites. Mater Des 2009;30:2774–7.  Ates E. The effect of temperature change on flexural strength of polymer concrete composites with polyester resin during hardening at furnace atmosphere. Sci Eng Compos Mater 2007;14(3):205–18.  TS 802. The Turkish Standards Institution. Design concrete mixes.  DIN 1045. The German Institute for Standardization. Concrete, reinforced and prestressed concrete structures.  Ates E. Optimization of compression strength by granulometry and change of binder rates in epoxy and polyester resin concrete. J Reinf Plast Compos 2009;28(2):235–46.  DIN 16911. The German Institute for Standardization. Stationary source emissions – determination of velocity and volumetric flow in ducts.  DIN 16945. The German Institute for Standardization. Testing of resins, hardeners and accelerators and catalyzed resins.  ISO3310-1. InternationalOrganization for Standardization. Test sieves – technical requirements and testing-part 1: test sieves ofmetal wire cloth.  EN 12620. European Standard. Aggregates for concrete.  DIN 51290-3. The German Institute for Standardization. Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separately manufactured specimens.  ISO4012. InternationalOrganization for Standardization. Concrete–determination of compressive strength of test specimens.  Montgomery Douglas C, Runger George C, Hubele Norma F. Engineering statistics. Wiley; 2007.|
Actions (login required)