Influence of thermal and thermo-mechanical processing on the creep resistance of Mg-10Gd-3Y-0,4Zr alloy
Janik, Vit, Wang, Qu Dong, Yin, Dong Di and Ding, Wen Jiang. (2011) Influence of thermal and thermo-mechanical processing on the creep resistance of Mg-10Gd-3Y-0,4Zr alloy. Materials Science Forum, 675-677 . pp. 487-490. ISSN 1662-9752
MSF Janik.pdf - Published Version
Restricted to Repository staff only
Official URL: http://dx.doi.org/10.4028/www.scientific.net/MSF.6...
Alloy Mg-10Gd-3Y-0,4Zr in as-cast, as-extruded, cast-T6 (peak aged) and extruded-T5 (peak aged) state was tensile creep tested at 200, 250 and 300 °C and stress 50, 80 and 120 MPa. Comparison of minimal creep rate shows that alloy Mg-10Gd-3Y-0,4Zr in cast-T6 conditions is characterized by an excellent creep resistance, which is higher than that of commercially available Mg-alloys. Creep resistance of as-cast, as-extruded and extruded-T5 alloy Mg-10Gd-3Y-0,4Zr is lower. Cavity nucleation is heavily affected by the amount of secondary phases on the grain boundaries and also by the initial grain size of the microstructure. After extrusion and in the extruded-T5 conditions creep cavitation was not observed, whereas in the as-cast and cast-T6 conditions creep cavitation occurred on the high fraction of grain boundaries.
|Item Type:||Journal Article|
|Subjects:||T Technology > TN Mining engineering. Metallurgy|
|Divisions:||Faculty of Science > WMG (Formerly the Warwick Manufacturing Group)|
|Journal or Publication Title:||Materials Science Forum|
|Publisher:||Trans Tech Publications.|
|Official Date:||February 2011|
|Page Range:||pp. 487-490|
|Access rights to Published version:||Restricted or Subscription Access|
Actions (login required)
Downloads per month over past year