The Library
Measurement of compliance of infusion device consumable elements using an analytical weighing balance
Tools
Clarkson, Douglas McG. and Barbosa, Romain (2014) Measurement of compliance of infusion device consumable elements using an analytical weighing balance. Medical Engineering & Physics, Volume 36 (Number 11). pp. 1502-1507. doi:10.1016/j.medengphy.2014.07.016 ISSN 13504533.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Official URL: http://dx.doi.org/10.1016/j.medengphy.2014.07.016
Abstract
The value of compliance of disposable elements such as infusion lines and syringes can significantly affect the performance characteristics of infusion devices. In a technique used to determine the compliance of infusion lines, the item under test is placed in a semi sealed water filled enclosure and the volume of fluid displaced is measured on an analytical weighing balance as set pressures are applied to the test item. Thermal drift of the measurement chamber was minimised by inclusion of discs of Invar alloy. Measurements were also made to determine the compliance of syringes used with syringe drivers where the volume of fluid displaced upon release of established pressure levels within a syringe was measured using a separate measurement configuration using again an analytical weighing balance. These techniques were used to determine the relative contributions to compliance of infusion lines and syringes to the dynamics of operation of syringe drivers. This indicated that contributions to compliance from syringes were significantly greater than that of connected infusion lines. Values of time to occlude, occlusion bolus and effects of height elevation for infusion devices with elements of varying compliance and line configuration are discussed.
Item Type: | Journal Article | ||||||||
---|---|---|---|---|---|---|---|---|---|
Divisions: | Faculty of Science, Engineering and Medicine > Science > Computer Science | ||||||||
Journal or Publication Title: | Medical Engineering & Physics | ||||||||
Publisher: | Elsevier Ltd. | ||||||||
ISSN: | 13504533 | ||||||||
Official Date: | 20 August 2014 | ||||||||
Dates: |
|
||||||||
Volume: | Volume 36 | ||||||||
Number: | Number 11 | ||||||||
Page Range: | pp. 1502-1507 | ||||||||
DOI: | 10.1016/j.medengphy.2014.07.016 | ||||||||
Status: | Peer Reviewed | ||||||||
Publication Status: | Published | ||||||||
Access rights to Published version: | Restricted or Subscription Access | ||||||||
Embodied As: | 1 |
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |