Skip to content Skip to navigation
University of Warwick
  • Study
  • |
  • Research
  • |
  • Business
  • |
  • Alumni
  • |
  • News
  • |
  • About

University of Warwick
Publications service & WRAP

Highlight your research

  • WRAP
    • Home
    • Search WRAP
    • Browse by Warwick Author
    • Browse WRAP by Year
    • Browse WRAP by Subject
    • Browse WRAP by Department
    • Browse WRAP by Funder
    • Browse Theses by Department
  • Publications Service
    • Home
    • Search Publications Service
    • Browse by Warwick Author
    • Browse Publications service by Year
    • Browse Publications service by Subject
    • Browse Publications service by Department
    • Browse Publications service by Funder
  • Help & Advice
University of Warwick

The Library

  • Login
  • Admin

Deposition of a silicon carbide reinforced metal matrix composite (P25) layer using CO2 laser

Tools
- Tools
+ Tools

Wai Yip, Mum, Barnes, Stuart and Aly Diaa Mohmmed Sarhan, Ahmed (2015) Deposition of a silicon carbide reinforced metal matrix composite (P25) layer using CO2 laser. Journal of Manufacturing Science and Engineering, 137 (3). MANU-14-1349. doi:10.1115/1.4029831 ISSN 1087-1357.

Research output not available from this repository.

Request-a-Copy directly from author or use local Library Get it For Me service.

Official URL: http://dx.doi.org/10.1115/1.4029831

Request Changes to record.

Abstract

The objective of this research was to deposit a silicon carbide (SiC) reinforced layer of P25 (iron-based matrix material) on substrate material surface using CO2 laser. Two experiments using CO2 laser were carried out in this research. In the first experiment set, a gravity feed system was used with one powder feed containing different percentages of SiC particles and iron-based powder. In the second experiment set, preplaced powder was placed on substrate material surface. According to the experimental results, only few SiC particles were found in the clad matrix in the first experiment, and no SiC particles were found in the second experiment. A high microhardness value was noted in the SiC clad (above 1000 HV) in the first experiment compared to the second experiment with hardness values ranging from 200 HV to 700 HV. This was due to the high precipitation of carbide particles in the clad material during the first experiment. A comparison of the two different experiments signifies that the first one was the best because a more uniform layer with less porosity was produced.

Item Type: Journal Article
Divisions: Faculty of Science, Engineering and Medicine > Engineering > WMG (Formerly the Warwick Manufacturing Group)
Journal or Publication Title: Journal of Manufacturing Science and Engineering
Publisher: ASME
ISSN: 1087-1357
Official Date: 1 June 2015
Dates:
DateEvent
1 June 2015Published
2 March 2015Accepted
27 June 2014Submitted
Volume: 137
Number: 3
Article Number: MANU-14-1349
DOI: 10.1115/1.4029831
Status: Peer Reviewed
Publication Status: Published
Description:

031010

Request changes or add full text files to a record

Repository staff actions (login required)

View Item View Item
twitter

Email us: wrap@warwick.ac.uk
Contact Details
About Us