The Library
A computer model of the artificially ventilated human respiratory system in adult intensive care
Tools
Wilson, A. J., Murphy, C. M., Brook, B. S., Breen, D., Miles, A. W. and Tilley, D. G. (2009) A computer model of the artificially ventilated human respiratory system in adult intensive care. Medical Engineering & Physics, Vol.31 (No.9). pp. 1118-1133. doi:10.1016/j.medengphy.2009.07.009 ISSN 13504533.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Official URL: http://dx.doi.org/10.1016/j.medengphy.2009.07.009
Abstract
A multi-technique approach to modelling artificially ventilated patients on the adult general intensive care unit (ICU) is proposed. Compartmental modelling techniques were used to describe the mechanical ventilator and the flexible hoses that connect it to the patient. 3D CFD techniques were used to model flow in the major airways and a Windkessel style balloon model was used to model the mechanical properties of the lungs. A multi-compartment model of the lung based on bifurcating tree structures representing the conducting airways and pulmonary circulation allowed lung disease to be modelled in terms of altered (V) over dot/(Q) over dot ratios within a lognormal distribution of values and it is from these that gas exchange was determined. A compartmental modelling tool, Bathfp, was used to integrate the different modelling techniques into a single model. The values of key parameters in the model could be obtained from measurements on patients in an ICU whilst a sensitivity analysis showed that the model was insensitive to the value of other parameters within it. Measured and modelled values for arterial blood gases and airflow parameters are compared for 46 ventilator settings obtained from 6 ventilator dependent patients. The results show correlation coefficients of 0.88 and 0.85 for the arterial partial pressures of the O-2 and CO2, respectively (p < 0.01) and of 0.99 and 0.96 for upper airway pressure and tidal volume, respectively (p < 0.01). The difference between measured and modelled values was large in physiological terms, suggesting that some optimisation of the model is required. (C) 2009 IPEM. Published by Elsevier Ltd. All rights reserved.
Item Type: | Journal Article | ||||
---|---|---|---|---|---|
Subjects: | R Medicine | ||||
Divisions: | Faculty of Science, Engineering and Medicine > Science > Physics | ||||
Journal or Publication Title: | Medical Engineering & Physics | ||||
Publisher: | Elsevier Ltd. | ||||
ISSN: | 13504533 | ||||
Official Date: | November 2009 | ||||
Dates: |
|
||||
Volume: | Vol.31 | ||||
Number: | No.9 | ||||
Number of Pages: | 16 | ||||
Page Range: | pp. 1118-1133 | ||||
DOI: | 10.1016/j.medengphy.2009.07.009 | ||||
Status: | Peer Reviewed | ||||
Publication Status: | Published | ||||
Access rights to Published version: | Restricted or Subscription Access | ||||
Funder: | Engineering and Physical Sciences Research Council (EPSRC) | ||||
Grant number: | GR/L74323, GR/L74835 |
Data sourced from Thomson Reuters' Web of Knowledge
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |