The Library
Three-dimensional porous bioscaffolds for bone tissue regeneration : fabrication via adaptive foam reticulation and freeze casting techniques, characterization, and cell study
Tools
Mallick, Kajal, Winnett, James, van Grunsven, William, Lapworth, James and Reilly, Gwendolen C. (2012) Three-dimensional porous bioscaffolds for bone tissue regeneration : fabrication via adaptive foam reticulation and freeze casting techniques, characterization, and cell study. Journal of Biomedical Materials Research Part A, Vol.100A (No.11). pp. 2948-2959. doi:10.1002/jbm.a.34238 ISSN 1549-3296.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Official URL: http://dx.doi.org/10.1002/jbm.a.34238
Abstract
Highly interconnected and 3D porous bioactive hydroxyapatite (HAP) and Bioglass scaffolds have been fabricated by an adaptive version of camphene based foam reticulation (ARM) and camphene freeze casting (CFC) methods. Controlled sublimation of camphene during freeze casting at −78°C produced process optimized bioscaffolds with open, uniform, and interconnected porous structures. HAP and Bioglass scaffolds with desired porosity, pore size, and microtopography were successfully fabricated using polyurethane foam templates of appropriate structures. Macropores of 50–1100 μm with microporosity of 1–10 μm, known to facilitate cell adhesion and proliferation, were obtained. Compressive yield strength of 0.8 MPa close to the upper range of cancellous bone was achieved. The mean compressive strength of HAP scaffolds compared favorably with the theoretical model of porosity variation with strength and was higher than reported values. The nature of pore development, morphology, porosity, crystal structure, chemical composition, and thermal behavior were characterized using scanning electron and optical microscopy, X-ray diffraction, thermal analysis, and mercury porosimetry. These scaffolds are suited for nonstructural graft and were not cytotoxic in vitro when osteoblast-like MG63 cells were cultured with the HAP constructs. The cells attached indicated by cell metabolic activity by resazurin assay and spread well when cultured on the surface of the materials. © 2012 Wiley Periodicals
Item Type: | Journal Article | ||||
---|---|---|---|---|---|
Subjects: | R Medicine > R Medicine (General) T Technology > TA Engineering (General). Civil engineering (General) |
||||
Divisions: | Faculty of Science, Engineering and Medicine > Engineering > WMG (Formerly the Warwick Manufacturing Group) | ||||
Journal or Publication Title: | Journal of Biomedical Materials Research Part A | ||||
Publisher: | John Wiley & Sons Ltd. | ||||
ISSN: | 1549-3296 | ||||
Official Date: | November 2012 | ||||
Dates: |
|
||||
Volume: | Vol.100A | ||||
Number: | No.11 | ||||
Number of Pages: | 12 | ||||
Page Range: | pp. 2948-2959 | ||||
DOI: | 10.1002/jbm.a.34238 | ||||
Status: | Peer Reviewed | ||||
Publication Status: | Published | ||||
Access rights to Published version: | Restricted or Subscription Access |
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |