The Library
KoolGas (TM) - Innovation in injection moulding ADVANCES IN PLASTIC INJECTION MOULDING TECHNOLOGY
Tools
UNSPECIFIED (2002) KoolGas (TM) - Innovation in injection moulding ADVANCES IN PLASTIC INJECTION MOULDING TECHNOLOGY. In: International Conference on Advances in Injection Moulding Technology, BARCELONA, SPAIN, MAR 18-19, 2002. Published in: INJECTION MOULDING 2002, CONFERENCE PROCEEDINGS pp. 95-103. ISBN 1-85957-314-2.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Abstract
KoolGas(TM) is a range of novel gas-assisted injection moulding techniques investigated and developed at Warwick University. As an alternative the conventional gas-assisted moulding process, cryogenically cooled gas is injected into the polymer melt stream in a controllable fashion, at temperatures ranging from -20degreesC to as low as -196degreesC. As a result, heat transfer at the gas channel interface is enhanced and considerable cycle time reductions can be achieved. An overview of the process system as it has developed is presented. Also, the fundamentals of some of the methods investigated for the injection of low temperature gas is covered. One method employs the single injection of low temperature gas, using conventional gas-assisted injection moulding practices: The other methods relate to the cryogenic injection of gas in a conventional fashion and controlled manipulation of the low temperature gas during the cooling and packing stages, i.e. using time-controlled cyclic compression followed by adiabatic expansion. Cavity melt temperature profiles were measured at different locations of a test specimen and compared for the conventional gas-assisted process and the different low temperature methods. The effects of the low temperature gas on the residual wall thickness distribution and gas channel surface morphology are analysed. Finally, advantages and limitations on the application of KoolGas(TM) and current developments are presented.
Item Type: | Conference Item (UNSPECIFIED) | ||||
---|---|---|---|---|---|
Subjects: | T Technology > TS Manufactures | ||||
Journal or Publication Title: | INJECTION MOULDING 2002, CONFERENCE PROCEEDINGS | ||||
Publisher: | RAPRA TECHNOLOGY LTD | ||||
ISBN: | 1-85957-314-2 | ||||
Official Date: | 2002 | ||||
Dates: |
|
||||
Number of Pages: | 9 | ||||
Page Range: | pp. 95-103 | ||||
Publication Status: | Published | ||||
Title of Event: | International Conference on Advances in Injection Moulding Technology | ||||
Location of Event: | BARCELONA, SPAIN | ||||
Date(s) of Event: | MAR 18-19, 2002 |
Data sourced from Thomson Reuters' Web of Knowledge
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |