Crosta, Giovanni Battista, Utili, Stefano, De Blasio, Fabio Vittorio and Castellanza, Riccardo. (2014) Reassessing rock mass properties and slope instability triggering conditions in Valles Marineris, Mars. Earth and Planetary Science Letters , Volume 388 . pp. 329-342. ISSN 0012821X

Dattola, G., di Prisco, C., Redaelli, I. and Utili, S.. (2014) A distinct element method numerical investigation of compaction processes in highly porous cemented granular materials. International Journal for Numerical and Analytical Methods in Geomechanics . ISSN 0363-9061 (In Press)

Utili, S.. (2013) Investigation by limit analysis on the stability of slopes with cracks. Geotechnique, Volume 63 (Number 2). pp. 140-154. ISSN 0016-8505

Jiang, Mingjing, Zhang, Wangcheng, Sun, Yugang and Utili, Stefano. (2013) An investigation on loose cemented granular materials via DEM analyses. Granular Matter, Volume 15 (Number 1). pp. 65-84. ISSN 1434-5021

Wang, H. N., Li, Y., Ni, Q., Utili, S., Jiang, M. J. and Liu, F.. (2013) Analytical solutions for the construction of deeply buried circular tunnels with two liners in rheological rock. Rock Mechanics and Rock Engineering . ISSN 0723-2632 (In Press)

Di Prisco, C., Rinaldi, G. and Utili, Stefano (2013) Numerical dem analyses under simple shear conditions : the steady state for granular matters under large strain rates. In: III International Conference on Particle-based Methods – Fundamentals and Applications PARTICLES 2013, Stuttgart, Germany, 18-20 Sep 2013. Published in: Proceedings of the 3rd International Conference on Particle-based Methods Fundamentals and Applications, Particles pp. 764-774.

Boon, C. W., Houlsby, G. T. and Utili, S.. (2012) A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, Vol.44 . pp. 73-82. ISSN 0266-352X

Crosta, G. B., Castellanza, R., De Blasio, F. and Utili, S. (2012) Slope stability analysis for Valles Marineris, Mars: a numerical analysis of controlling conditions and failure types. In: European Geosciences Union General Assembly 2012, Vienna, Austria, Apr 22-27, 2012 (No.11667).

Utili, S. and Crosta, G. B.. (2011) Modeling the evolution of natural cliffs subject to weathering. 1, Limit analysis approach. Journal of Geophysical Research, Vol.116 (Number F1). Article: F01016. ISSN 0148-0227

Utili, S. and Crosta, G. B.. (2011) Modeling the evolution of natural cliffs subject to weathering. 2, Discrete element approach. Journal of Geophysical Research, Vol.116 (No.F1). Article: F01017. ISSN 0148-0227

Jiang, M. J., Yan, H. B., Zhu, Hehua and Utili, S.. (2011) Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses. Computers and Geotechnics, Vol.38 (No.1). pp. 14-29. ISSN 0266-352X

Murugaratnam, K. and Utili, S. (2011) Shot peening optimization using the discrete element method. In: 11th International Conference on Shot Peening, South Bend, IN, U.S.A., Sep 12-15, 2011. Published in: Proceedings of the 11th International Conference on Shot Peening pp. 135-140.

Dyer, M. (Mark), Utili, S. and Zielinski, M. (Marcin). (2009) Field survey of desiccation fissuring of flood embankments. Proceedings of the ICE - Water Management, Vol.162 (No.3). pp. 221-232. ISSN 1741-7589

Yin, Zhen-yu, Huang, Hong-wei, Utili, S. and Hicher, Pierre-Yves. (2009) Modeling rate-dependent behaviors of soft subsoil under embankment loads. Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering, Vol.31 (No.1). pp. 109-117. ISSN 1000-4548

Utili, S., Dyer, M. and Zielinski, M. (2009) Failure mechanisms and ultimate resistance of earth flood embankment with attention to desiccation fissuring. In: Annual Conference of the Canadian Society for Civil Engineering 2008, Quebec City, Quebec, Canada, Jun 10-13, 2008. Published in: Proceedings of the Annual Conference of the Canadian Society for Civil Engineering 2008, Vol.4 pp. 2719-2727.

Utili, S. and Nova, R.. (2008) DEM analysis of bonded granular geomaterials. International Journal for Numerical and Analytical Methods in Geomechanics, Vol.32 (No.17). pp. 1997-2031. ISSN 0363-9061

Utili, S., Yin, Zhen-yu and Jiang, M.J.. (2008) Influence of hydraulic uplift pressures on the stability of a gravity dam. Yanshi Lixue yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, Vol.27 (No.8). pp. 1554-1568. ISSN 1000-6915

Utili, S. and Nova, R. (2008) A study of cliffs subject to degradation by DEM (PFC2D). In: First International FLAC/DEM Symposium on Numerical Modeling, Minneapolis, MN, U.S.A., Aug 25-27, 2008. Published in: Proceedings of the First International FLAC/DEM Symposium on Numerical Modeling

Utili, S. and Nova, R. (2008) Calibration of micromechanical parameters to reproduce a frictional cohesive continuum by the distinct element method. In: The 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, India, Oct 1-6, 2008. Published in: Proceedings of the 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics pp. 163-170.

Utili, S., Dyer, M., Redaelli, M. and Zielinski, M. (2008) Desiccation fissuring induced failure mechanisms for clay levees. In: 10th International Symposium on Landslides and Engineered Slopes, Xi'an, China, Jun 30 - Jul 4, 2008. Published in: Landslides and Engineered Slopes: From the Past to the Future - Proceedings of the 10th International Symposium on Landslides and Engineered Slopes, Vol.1-2 pp. 1309-1314.

Redaelli, M., Utili, S. and Dyer, M. (2008) A proposal for a reliability rating system for fluvial flood defence embankments in the United Kingdom. In: 10th International Symposium on Landslides and Engineered Slopes, Xi'an, China, Jun 30 - Jul 4, 2008. Published in: Landslides and Engineered Slopes: From the Past to the Future - Proceedings of the 10th International Symposium on Landslides and Engineered Slopes, Vol.1-2 pp. 1965-1970.

Utili, S. and Nova, R.. (2007) On the optimal profile of a slope. Soils & Foundations, Vol.47 (No.4). pp. 717-729.