The Library
Browse by Warwick Author
Up a level |
Number of items: 11.
2019
Hernandez-Serrano, Arturo I., Sun, Qiushuo, Bishop, Elizabeth G., Griffiths, Elliott R., Purssell, C. P., Leigh, Simon J., Lloyd-Hughes, James and Pickwell-MacPherson, Emma (2019) Design and fabrication of 3-D printed conductive polymer structures for THz polarization control. Optics Express, 27 (8). pp. 11635-11641. doi:10.1364/OE.27.011635 ISSN 1094-4087.
2015
Ramadas, Sivaram Nishal, Hunter, Michael, Thornby, John Albert, Purssell, C. P., Leigh, Simon J. and Dixon, Steve M. (2015) Additive manufacture of impedance matching layers for air-coupled ultrasonic transducers. In: 2015 IEEE International Ultrasonics Symposium , Taipei, Taiwan, 21-24 Oct 2015 pp. 1-4. doi:10.1109/ULTSYM.2015.0367
Woodward, David I., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Leigh, Simon J. (2015) Additively-manufactured piezoelectric devices. Physica Status Solidi (a), 212 (10). pp. 2107-2113. doi:10.1002/pssa.201532272 ISSN 0031-8965.
2014
Leigh, Simon J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2014) Using a magnetite/thermoplastic composite in 3D printing of direct replacements for commercially available flow sensors. Smart Materials and Structures, 23 (9). 095039. doi:10.1088/0964-1726/23/9/095039 ISSN 0964-1726.
2012
Leigh, Simon J., Bowen, J., Purssell, C. P., Covington, James A., Billson, Duncan R. and Hutchins, David A. (2012) Rapid manufacture of monolithic micro-actuated forceps inspired by echinoderm pedicellariae. Bioinspiration & Biomimetics, Vol.7 (No.4). Article: 044001. doi:10.1088/1748-3182/7/4/044001 ISSN 1748-3182.
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365 ISSN 1932-6203.
Purssell, C. P. (2012) Materials and methods for microstereolithography. PhD thesis, University of Warwick.
2011
Cheneler, D., Bowen, J., Leigh, Simon J., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, Vol.111 (No.8). pp. 1214-1223. doi:10.1016/j.ultramic.2011.03.009 ISSN 0304-3991.
Leigh, Simon J., Purssell, C. P., Bowen, J., Hutchins, David A., Covington, James A. and Billson, Duncan R. (2011) A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin. Sensors and Actuators A: Physical, Vol.168 (No.1). pp. 66-71. doi:10.1016/j.sna.2011.03.058 ISSN 0924-4247.
Billson, Duncan R., Purssell, C. P., Leigh, Simon J. and Hutchins, David A. (2011) Rapid rototyping technologies for ultrasonic beam focussing in NDE. In: 2011 IEEE International Ultrasonics Symposium (IUS), Orlando, FL, 18-21 Oct 2011. Published in: 2011 IEEE International Ultrasonics Symposium (IUS) pp. 2472-2474. ISBN 9781457712531.
2010
Leigh, Simon J. and Purssell, C. P. (2010) A quick cup of coffee. [Image]University of Warwick.
This list was generated on Thu Mar 28 16:15:58 2024 GMT.