2021

Raviraj, Akalya, Kourra, Nadia, Williams, M. A., Abbel, Gert, Davis, Claire, Tiekink, Wouter, Sridhar, Seetharaman and Spooner, Stephen (2021) The spontaneous emulsification of entrained inclusions during casting of high aluminum steels. Metallurgical and Materials Transactions B . doi:10.1007/s11663-021-02091-z (In Press)

2020

Al-Nabulsi, Z., Mottram, J. Toby, Gillie, Martin, Kourra, Nadia and Williams, M. A. (2020) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials . 121700. doi:10.1016/j.conbuildmat.2020.121700 (In Press)

Tan, Chaou C., Walker, Marc, Remy, Guillaume , Kourra, Nadia, Maddar, Faduma, Dixon, Steve M., Williams, Mark A. and Loveridge, Melanie (2020) Ageing analysis and asymmetric stress considerations for small format cylindrical cells for wearable electronic devices. Journal of Power Sources, 472 . 228626. doi:10.1016/j.jpowsour.2020.228626

Qian, Connie, Weare, Rachel, Pasco, Corentin, Kourra, Nadia, Attridge, Alex, Williams, Mark A. and Kendall, Kenneth N. (2020) Numerical and experimental studies of multi-ply woven carbon fibre prepreg forming process. Procedia Manufacturing, 47 . pp. 93-99. doi:10.1016/j.promfg.2020.04.142

2019

El-Zehairy, A. A., Nezhad, M. Mousavi, Joekar-Niasar, V., Guymer, I., Kourra, N. and Williams, M. A. (2019) Pore-network modelling of non-Darcy flow through heterogeneous porous media. Advances in Water Resources, 131 . 103378. doi:10.1016/j.advwatres.2019.103378

Morankar, Swapnil, Mandal, Monalisa, Kourra, Nadia, Williams, M. A., Mitra, Rahul and Srirangam, Prakash (2019) X-Ray tomography study on porosity and particle size distribution in In Situ Al-4.5Cu-5TiB2 Semisolid rolled composites. JOM . doi:10.1007/s11837-019-03385-z

2018

Hu, Borong, Konaklieva, Sylvia, Ran, Li, Kourra, Nadia, Williams, Mark A., Lai, Wei and Mawby, Philip. A. (2018) Long term reliability of power modules with low amplitude thermomechanical stresses and initial defects. In: 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, USA, 23 - 27 Sep 2018. Published in: 2018 IEEE Energy Conversion Congress and Exposition (ECCE) ISBN 9781479973125. doi:10.1109/ECCE.2018.8558137

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard and Williams, M. A. (2018) Non-destructive examination of additive manufactured acetabular hip prosthesis cups. In: SPIE 10763 Optics and Photonics, San Diego, CA, 19-23 Aug 2018. Published in: Proceedings of SPIE - International Society for Optical Engineering (107630F). ISSN 0277-786X. doi:10.1117/12.2321055

McEwen, Iain, Cooper, David E., Warnett, Jason M., Kourra, Nadia, Williams, M. A. and Gibbons, Gregory John (2018) Design & manufacture of a high-performance bicycle crank by additive manufacturing. Applied Sciences, 8 (8). 1360. doi:https://doi.org/10.3390/app8081360

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard and Williams, M. A. (2018) Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups. Additive Manufacturing, 22 . pp. 146-152. doi:10.1016/j.addma.2018.04.033

Loveridge, Melanie, Remy, Guillaume , Kourra, Nadia, Genieser, Ronny, Barai, Anup, Lain, Mike J., Guo, Yue, Amor-Segan, Mark, Williams, Mark A., Amietszajew, Tazdin, Ellis, Mark, Bhagat, Rohit and Greenwood, David G. (2018) Looking deeper into the galaxy (note 7). Batteries, 4 (3). 3. doi:10.3390/batteries4010003

2017

Kourra, Nadia, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Metrological investigation of radiation filtration in x-ray computed tomography. In: Instrumentation and Measurement Technology Conference (I2MTC), Torino, Italy, Italy, 22-25 May 2017. Published in: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969797

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. doi:10.1007/s00170-016-8691-4

2016

Kourra, Nadia (2016) The application of x-ray computed tomography in aerospace industry : innovation report. EngD thesis, University of Warwick.

2015

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Kiraci, Ercihan, Gupta, Aniruddha, Barnes, Stuart and Williams, M. A. (Mark A.) (2015) Metrological study of CFRP drilled holes with x-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 78 (9-12). pp. 2025-2035. doi:10.1007/s00170-014-6734-2

2014

Kourra, Nadia, Williams, M. A., Attridge, Alex, Warnett, Jason M., Barnes, Stuart and Gupta, Aniruddha (2014) Analysis of drilled holes on carbon fibre material with X-ray computed tomography. In: 2014 IEEE International Workshop on Metrology for Aerospace (MetroAeroSpace), Benevento, Italy, 29–30 May 2014. Published in: IEEE International Workshop on Metrology for Aerospace (Number CFP1432W). ISBN 9781479920709. doi:10.1109/MetroAeroSpace.2014.6865923

Gupta, Aniruddha, Barnes, Stuart, McEwen, Iain, Kourra, Nadia and Williams, M. A. (Mark A.) (2014) Study of cutting speed variation in the ultrasonic assisted drilling of carbon fibre composites. In: ASME 2014 International Mechanical Engineering Congress and Exposition, Montreal, Canada, 14–20 Nov 2014. Published in: ASME Proceedings Advanced Manufacturing, Volume 2B V02BT02A038. ISBN 9780791846445. doi:10.1115/IMECE2014-37046