The Library
Browse by Warwick Author
Up a level |
Number of items: 27.
2023
Yuan, Hao, Khan, Muhammad Aurangzeb, Qian, Connie, Reynolds, Neil and Kendall, Kenneth N. (2023) Experimental and numerical investigation of the intra-ply shear behaviour of unidirectional prepreg forming through picture-frame test. Composites Part B: Engineering, 266 . 11036. doi:10.1016/j.compositesb.2023.111036 ISSN 1359-8368.
Zwanenburg, E. A., Norman, D. G., Qian, Connie, Kendall, Kenneth N., Williams, M. A. (Mark A.) and Warnett, Jason M. (2023) Effective X-ray micro computed tomography imaging of carbon fibre composites. Composites Part B: Engineering, 258 . 110707. doi:10.1016/j.compositesb.2023.110707 ISSN 1359-8368.
Qian, Connie, Zwanenburg, E. A., Weare, Rachel, Norman, Danielle, Warnett, Jason M., Williams, M. A. and Kendall, Kenneth N. (2023) Experimental and numerical characterisation of fibre orientation distribution in compression moulded carbon fibre SMC. In: 23th International Conference on Composite Materials (ICCM 23), Belfast, UK, 31 Jul – 04 Aug 2023
Yuan, Hao, Khan, Muhammad Aurangzeb, Kendall, Kenneth N. and Qian, Connie (2023) Process characterisation for compression moulding of hybrid-architecture composites. In: 23th International Conference on Composite Materials (ICCM 23), Belfast, UK, 31 Jul - 4 Aug 2023
2022
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
Qian, Connie, Norman, Danielle, Williams, M. A. and Kendall, Kenneth N. (2022) Experimental and numerical characterisation of fibre orientation distributions in compression moulded carbon fibre SMC. Plastics, Rubber and Composites: Macromolecular Engineering, 51 (8). pp. 436-444. doi:10.1080/14658011.2022.2108984 ISSN 1465-8011.
Qian, Connie, Yuan, Hao, Jesri, Mona, Khan, Muhammad Aurangzeb and Kendall, Kenneth N. (2022) Flow behaviour of carbon fibre sheet moulding compound. Key Engineering Materials, 926 . pp. 1350-1357. doi:10.4028/p-g9s2nr ISSN 1662-9795.
Qian, Connie, Deshpande, Abhaye, Simsek-Polat, Derya, Clarke, Jason, Sicard, Fredric and Kendall, Kenneth N. (2022) Manufacturing process simulation for compression moulding of sheet moulding compound – an automotive case study. In: 20th European Conference on Composite Materials (ECCM20), Lausanne, Switzerland, 26-30 Jun 2022
2021
Qian, Connie, Deshpande, Abhaye, Jesri, Mona, Groves, Richard, Reynolds, Neil and Kendall, Kenneth N. (2021) A comprehensive assessment of commercial process simulation software for compression moulding of sheet moulding compound. In: ESAFORM 2021 : 24th International Conference on Material Forming, Online, 14-16 Apr 2021. Published in: ESAFORM 2021 doi:10.25518/esaform21.2771
Khan, M. A., Pasco, C., Reynolds, N. and Kendall, Kenneth N. (2021) Shear deformability characteristics of a rapid-cure woven prepreg fabric. International Journal of Material Forming, 14 (1). pp. 133-142. doi:10.1007/s12289-019-01532-0 ISSN 1960-6206.
Weare, R., Bank, D., Subramanian, R. and Kendall, K. (2021) Composite materials for automated manufacture of automotive structures. In: 8th Annual Composites and Advanced Materials Expo, CAMX 2021, Dallas, TX, USA, 19-21 Oct 2021. Published in: Proceedings of the 8th Annual Composites and Advanced Materials Expo, CAMX 2021 pp. 1337-1353. ISBN 9781934551400. (Unpublished)
2020
Khan, Muhammad Aurangzeb, Pasco, Corentin, Reynolds, Neil and Kendall, Kenneth N. (2020) On the validity of bias-extension test method for the characterisation of in-plane shear properties of rapid-cure prepregs. Composite Structures, 246 . 112399. doi:10.1016/j.compstruct.2020.112399 ISSN 0263-8223.
Gupta, Jaipal, Reynolds, Neil, Chiciudean, Teodor and Kendall, Kenneth N. (2020) A comparative study between epoxy and vinyl ester CF-SMC for high volume automotive composite crash structures. Composite Structures, 244 . 112299. doi:10.1016/j.compstruct.2020.112299 ISSN 0263-8223.
Qian, Connie, Weare, Rachel, Pasco, Corentin, Kourra, Nadia, Attridge, Alex, Williams, Mark A. and Kendall, Kenneth N. (2020) Numerical and experimental studies of multi-ply woven carbon fibre prepreg forming process. Procedia Manufacturing, 47 . pp. 93-99. doi:10.1016/j.promfg.2020.04.142 ISSN 2351-9789.
2019
Pasco, Corentin, Khan, Muhammad Aurangzeb and Kendall, Kenneth N. (2019) A novel discrete method of shear angle measurement for in-plane shear properties of thermoset prepreg using a point-tracking algorithm. Journal of Composite Materials, 53 (14). pp. 2001-2013. doi:10.1177/0021998318813193 ISSN 0021-9983.
2018
Pasco, Corentin, Khan, Muhammad Aurangzeb, Gupta, Jaipal and Kendall, Kenneth N. (2018) Experimental investigation on interply friction properties of thermoset prepreg systems. Journal of Composite Materials . doi:10.1177/0021998318781706 ISSN 0021-9983.
Fereshteh-Saniee, Nessa, Reynolds, Neil, Kelly, Catherine A., Wilson, Peter R., Jenkins, Mike J. and Kendall, Kenneth N. (2018) Introducing cryomilling for reliable determination of resin content and degree of cure in structural carbon fibre reinforced thermoset composites. Composites Part A: Applied Science and Manufacturing, 107 . pp. 197-204. doi:10.1016/j.compositesa.2018.01.004 ISSN 1359-835X.
Saniee, Nessa Fereshteh , Reynolds, Neil and Kendall, Kenneth N. (2018) Cryomilling : a critical step for accurate determination of degree of cure and resin content in carbon fibre reinforced thermosetting composites. In: Thermosetting Resins, Berlin, Germany, 25-27 Sep 2018. Published in: Proceedings of the Thermosetting Resins 2018 Conference, 25-27 September 2018, Berlin, Germany pp. 71-73. ISBN 9783000608278.
2015
Khan, Muhammad Aurangzeb, Reynolds, Neil, Williams, Geraint J. and Kendall, Kenneth N. (2015) Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements. Composite Structures, 131 . pp. 917-926. doi:10.1016/j.compstruct.2015.06.056 ISSN 0263-8223.
2006
Schubel, Peter J., Warrior, Nicholas A., Kendall, Kenneth N. and Rudd, Chris D. (2006) Characterisation of thermoset laminates for cosmetic automotive applications : Part I – Surface characterisation. Composites Part A: Applied Science and Manufacturing, 37 (10). pp. 1734-1746. doi:10.1016/j.compositesa.2005.09.013 ISSN 1359-835X.
1998
Kendall, Kenneth N., Mangin, C and Ortiz, E (1998) Discrete event simulation and cost analysis for manufacturing optimisation of an automotive LCM component. Composites Part A: Applied Science and Manufacturing, 29 (7). pp. 711-720. doi:10.1016/S1359-835X(98)00003-7 ISSN 1359-835X.
Wirth, Stephane, Gauvin, Raymond and Kendall, Kenneth N. (1998) Experimental analysis of core crushing and core Movementin RTM and SRIM foam cored composite parts. Journal of Reinforced Plastics and Composites, 17 (11). pp. 964-988. doi:10.1177/073168449801701101 ISSN 0731-6844.
1996
Rudd, C. D., Bulmer, L. J., Morris, D. J. and Kendall, Kenneth N. (1996) Compaction and in plane permeability characteristics of quasi unidirectional and continuous random reinforcements. Materials Science and Technology, 12 (5). pp. 436-444. doi:10.1179/026708396790165911 ISSN 0267-0836.
Lebrun, G., Gauvin, R. and Kendall, Kenneth N. (1996) Experimental investigation of resin temperature and pressure during filling and curring in a flat steel RTM mould. Composites Part A: Applied Science and Manufacturing, 27 (5). pp. 347-356. doi:10.1016/1359-835X(95)00050-C ISSN 1359-835X.
1994
Kendall, Kenneth N. and Rudd, C. D. (1994) Flow and cure phenomena in liquid composite molding. Polymer Composites, 15 (5). pp. 334-348. doi:10.1002/pc.750150504 ISSN 0272-8397.
1992
Rudd, C D and Kendall, Kenneth N. (1992) Towards a manufacturing technology for high-volume production of composite components. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 206 (2). pp. 77-91. doi:10.1243/PIME_PROC_1992_206_060_02 ISSN 0954-4054.
Kendall, Kenneth N., Rudd, C.D., Owen, M.J. and Middleton, V. (1992) Characterization of the resin transfer moulding process. Composites Manufacturing, 3 (4). pp. 235-249. doi:10.1016/0956-7143(92)90111-7 ISSN 0956-7143.
This list was generated on Fri Mar 29 10:06:49 2024 GMT.