Wang, B. X., Bhagat, R. (Rohit), Lan, X. Z. and Dashwood, R. J.. (2011) Production of Ni-35Ti-15Hf alloy via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.158 (No.10). D595-D602. ISSN 0013-4651

Silk, Jonathan R., Dashwood, R. J. and Charter, R. J.. (2011) FIB-SIMS analysis of an aluminum alloy/SiC metal matrix composite. Surface and Interface Analysis, Vol.43 (No.1-2). pp. 488-491. ISSN 0142-2421

Bhagat, R. (Rohit), Dye, D., Rao, K. K. (Kartik K.), Conti, M., Jones, Nicholas and Dashwood, R. J. (2011) Quantitative X-ray synchrotron analysis of Ti-6Al-4V alloy produced via the FFC process. In: 12th World Conference on Titanium, Beijing, China, Jun 19-24, 2011

Singh, R., Lee, P. D., Jones, J. R., Poologasundarampillai, G., Post, T., Lindley, T. C. and Dashwood, R. J.. (2010) Hierarchically structured titanium foams for tissue scaffold applications. Acta Biomaterialia, Vol.6 (No.12). pp. 4596-4604. ISSN 1742-7061

Bhagat, R. (Rohit), Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D. (Douglas), Jackson, B. K., Rao, K. K. (Kartik K.) and Dashwood, R. J.. (2010) In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2. Acta Materialia, Vol.58 (No.15). pp. 5057-5062. ISSN 1359-6454

Singh, R., Lee, P. D., Dashwood, R. J. and Lindley, T. C. (2010) Titanium foams for biomedical applications: a review. Materials Technology, Vol.25 (No.3-4). pp. 127-136. ISSN 1066-7857

Katsas, Stavros, Dashwood, R. J., Todd, Graham, Jackson, Martin and Grimes, Roger. (2010) Characterisation of Conform™ and conventionally extruded Al-4Mg-1Zr. Effect of extrusion route on superplasticity. Journal of Materials Science, Vol.45 (No.15). pp. 4188-4195. ISSN 0022-2461

Garcia, Daniel Aguilar, Dye, David, Jackson, Martin, Grimes, Roger and Dashwood, R. J.. (2010) Development of microstructure and properties during the multiple extrusion and consolidation of Al-4Mg-1Zr. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.527 (No.15). pp. 3358-3364. ISSN 0921-5093

Singh, R., Lee, P. D., Lindley, T. C., Kohlhauser, C., Hellmich, C., Bram, M., Imwinkelried, T. and Dashwood, R. J.. (2010) Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. Acta Biomaterialia, Vol.6 (No.6). pp. 2342-2351. ISSN 1742-7061

Silk, Jonathan R., Dashwood, R. J. and Chater, Richard J. (2010) Determination of lattice orientation in aluminium alloy grains by low energy gallium ion-channelling. In: 19th International Conference on Ion Beam Analysis, University of Cambridge, Cambridge, England, September 07-11, 2009. Published in: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol.268 (No.11-12). pp. 2064-2068.

Jackson, B. K., Dye, D., Inman, D., Bhagat, R. (Rohit), Talling, R. J., Raghunathan, S. L., Jackson, M. and Dashwood, R. J.. (2010) Characterization of the FFC Cambridge process for NiTi production using in situ X-Ray synchrotron diffraction. Journal of The Electrochemical Society, Vol.157 (No.4). E57-E63. ISSN 0013-4651

Katsas, S., Dashwood, R. J., Jackson, M. and Grimes, Roger. (2010) Influence of subsequent cold work on the superplastic properties of a friction stir welded (FSW) aluminium alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.527 (No.4-5). pp. 1022-1026. ISSN 0921-5093

Jackson, B. K., Inman, D., Jackson, M., Dye, D. and Dashwood, R. J.. (2010) NiTi production via the FFC Cambridge process: refinement of process parameters. Journal of The Electrochemical Society, Vol.157 (No.3). E36-E43. ISSN 0013-4651

Dashwood, R. J., Klaumunzer, David, Jackson, Martin, Fan, Zhongyun and Grimes, Roger. (2010) The development of superplastic magnesium alloy sheet. Key Engineering Materials, Vol.433 . pp. 273-279. ISSN 1013-9826

Tricker, D., Jackson, M. and Dashwood, R. J.. (2009) Direct extrusion of titanium alloy powder. Materials Technology, Vol.24 (No.3). pp. 174-179. ISSN 1066-7857

Jones, N. G., Dashwood, R. J., Jackson, M. and Dye, D.. (2009) beta Phase decomposition in Ti-5Al-5Mo-5V-3Cr. Acta Materialia, Vol.57 (No.13). pp. 3830-3839. ISSN 1359-6454

Jones, N. G., Dashwood, R. J., Dye, D. and Jackson, M.. (2009) The flow behavior and microstructural evolution of Ti-5Al-5Mo-5V-3Cr during subtransus isothermal forging. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.40 (No.8). pp. 1944-1954. ISSN 1073-5623

Talling, R. J., Dashwood, R. J., Jackson, M. and Dye, D.. (2009) Compositional variability in gum metal. Scripta Materialia, Vol.60 (No.11). pp. 1000-1003. ISSN 1359-6462

Jones, N. G., Dashwood, R. J., Jackson, M. and Dye, D.. (2009) Development of chevron-shaped alpha precipitates in Ti-5Al-5Mo-5V-3Cr. Scripta Materialia, Vol.60 (No.7). pp. 571-573. ISSN 1359-6462

Jackson, M., Jones, N. G., Dye, D. and Dashwood, R. J.. (2009) Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.501 (No.1-2). pp. 248-254. ISSN 0921-5093

Talling, R. J., Dashwood, R. J., Jackson, M. and Dye, D.. (2009) On the mechanism of superelasticity in gum metal. Acta Materialia, Vol.57 (No.4). pp. 1188-1198. ISSN 1359-6454

Singh, R., Lee, P. D., Lindley, Trevor C., Dashwood, R. J., Ferrie, Emilie and Imwinkelried, T.. (2009) Characterization of the structure and permeability of titanium foams for spinal fusion devices. Acta Biomaterialia, Vol.5 (No.1). pp. 477-487. ISSN 1742-7061

Jackson, B. K., Jackson, M., Dye, D., Inman, D. and Dashwood, R. J.. (2009) Optimization of the FFC Cambridge process for NiTi production. ECS Transactions, Vol.16 (No.49). pp. 211-219. ISSN 1938-5862

Dashwood, R. J., Jackson, M., Klaumunzer, David, Fan, Zhongyun and Grimes, Roger (2008) The development of a new manufacturing route for superplastic magnesium alloy sheet exploiting twin roll casting. In: The 6th European Conference on Superplastic Forming (EuroSPF 2008), Carcassonne, France, Sep 3-5, 2008. Published in: EuroSPF 2008, Carcassonne : France (2008) pp. 1-7.

Raghunathan, S. L., Dashwood, R. J., Jackson, Martin, Vogel, Sven and Dye, David (2008) In situ observation of texture evolution in Ti-10-2-3. In: 15th International Conference on Textures of Materials (ICOTOM 15), Pittsburgh, PA, 1-6 June 2008. Published in: Ceramic Transactions, Vol.201 pp. 65-72.

Bhagat, R. (Rohit), Jackson, M., Inman, D. and Dashwood, R. J.. (2008) Production of Ti-W alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.156 (No.1). E1-E7. ISSN 0013-4651

Jackson, Ben, Jackson, Martin, Dye, D., Inman, D. and Dashwood, R. J.. (2008) Production of NiTi via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.155 (No.12). E171-E177. ISSN 0013-4651

Talling, R. J., Dashwood, R. J., Jackson, M., Kuramoto, S. and Dye, D.. (2008) Determination of (C11-C12) in Ti–36Nb–2Ta–3Zr–0.3O (wt.%) (Gum metal). Scripta Materialia, Vol.59 (No.6). pp. 669-672. ISSN 1359-6462

Jones, N. G., Dashwood, R. J., Dye, D. and Jackson, M.. (2008) Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.490 (No.1-2). pp. 369-377. ISSN 0921-5093

Raghunathan, S. L., Dashwood, R. J., Jackson, M., Vogel, S. C. and Dye, D.. (2008) The evolution of microtexture and macrotexture during subtransus forging of Ti–10V–2Fe–3Al. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.488 (No.1-2). pp. 8-15. ISSN 0921-5093

Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J.. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. ISSN 0933-5137

Bhagat, R. (Rohit), Jackson, M., Inman, D. and Dashwood, R. J.. (2008) The production of Ti–Mo alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.155 (No.6). E63-E69. ISSN 0013-4651