Kafui, D. K., Johnson, S., Thornton, C. and Seville, J. P. K. (Jonathan P. K.). (2011) Parallelization of a Lagrangian–Eulerian DEM/CFD code for application to fluidized beds. Powder Technology, Vol.207 (No.1-3). pp. 270-278. ISSN 0032-5910

Brems, Anke, Chan, Chian W., Seville, J. P. K. (Jonathan P. K.), Parker, David and Baeyens, Jan. (2011) Modelling the transport disengagement height in fluidized beds. Advanced Powder Technology, Vol.22 (No.2). pp. 155-161. ISSN 0921-8831

Mahmoudi, Shiva, Baeyens, Jan and Seville, J. P. K. (Jonathan P. K.). (2011) The solids flow in the CFB-riser quantified by single radioactive particle tracking. Powder Technology, Vol.211 (No.1). pp. 135-143. ISSN 0032-5910

Sibanda, V., Greenwood, R. W., Seville, J. P. K. (Jonathan P. K.), Ding, Y. and Iyuke, S.. (2010) Predicting particle segregation in cross-flow gas filtration. Powder Technology, Vol.203 (No.3). pp. 419-427. ISSN 0032-5910

Chan, Chian W., Seville, Jonathan P. K., Parker, David J. and Baeyens, Jan. (2010) Particle velocities and their residence time distribution in the riser of a CFB. Powder Technology, Vol.203 (No.2). pp. 187-197. ISSN 0032-5910

Mahmoudi, S., Seville, J. P. K. (Jonathan P. K.) and Baeyens, J.. (2010) The residence time distribution and mixing of the gas phase in the riser of a circulating fluidized bed. Powder Technology, Vol.203 (No.2). pp. 322-330. ISSN 0032-5910

Portillo, Patricia M., Vanarase, Aditya U., Ingram, Andrew, Seville, Jonathan P. K., Ierapetritou, Marianthi G. and Muzzio, Fernando J.. (2010) Investigation of the effect of impeller rotation rate, powder flow rate, and cohesion on powder flow behavior in a continuous blender using PEPT. Chemical Engineering Science, Vol.65 (No.21). pp. 5658-5668. ISSN 0009-2509

Mahmoudi, Shiva, Baeyens, Jan and Seville, Jonathan P. K.. (2010) NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass and Bioenergy, Vol.34 (No.9). pp. 1393-1409. ISSN 0961-9534

Wu, C-Y, Fan, X. F., Motazedian, F., Seville, J. P. K. (Jonathan P. K.), Parker, D. J. and Cocks, A. C. F.. (2010) Quantitative investigation of powder flow during die filling using positron emission particle tracking. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol.224 (No.3). pp. 169-175. ISSN 0954-4089

Wu, C. -Y., Hung, W. -L., Miguelez-Moran, A. M., Gururajan, B. and Seville, J. P. K. (Jonathan P. K.). (2010) Roller compaction of moist pharmaceutical powders. International Journal of Pharmaceutics, Vol.391 (No.1-2). pp. 90-97. ISSN 0378-5173

Chan, Chian Wen, Brems, Anke, Mahmoudi, Shiva, Baeyens, Jan, Seville, Jonathan P. K., Parker, David, Leadbeater, Thomas and Gargiuli, Joseph. (2010) PEPT study of particle motion for different riser exit geometries. Particuology, Vol.8 (No.6). pp. 623-630. ISSN 1674-2001

Chan, Chian W., Seville, J. P. K. (Jonathan P. K.), Yang, Zhufang and Baeyens, Jan. (2009) Particle motion in the CFB riser with special emphasis on PEPT-imaging of the bottom section. Powder Technology, Vol.196 (No.3). pp. 318-325. ISSN 0032-5910

Chan, Chian W., Seville, J. P. K. (Jonathan P. K.), Fan, Xianfeng and Baeyens, Jan. (2009) Solid particle motion in a standpipe as observed by Positron Emission Particle Tracking. Powder Technology, Vol.194 (No.1-2). pp. 58-66. ISSN 0032-5910

Chan, Chian W., Seville, J. P. K. (Jonathan P. K.), Fan, Xianfeng and Baeyens, Jan. (2009) Particle motion in L-valve as observed by positron emission particle tracking. Powder Technology, Vol.193 (No.2). pp. 137-149. ISSN 0032-5910

Miguelez-Moran, Andres M., Wu, Chuan-Yu, Dong, Hanshan and Seville, J. P. K. (Jonathan P. K.). (2009) Characterisation of density distributions in roller-compacted ribbons using micro-indentation and X-ray micro-computed tomography. European Journal of Pharmaceutics and Biopharmaceutics, Vol.72 (No.1). pp. 173-182. ISSN 0939-6411

Chan, Chian W., Seville, J. P. K. (Jonathan P. K.), Fan, Xianfeng and Baeyens, Jan. (2009) Particle motion in CFB cyclones as observed by positron emission particle tracking. Industrial & Engineering Chemistry Research, Vol.48 (No.1). pp. 253-261. ISSN 0888-5885

Tu, Wei-Da, Ingram, Andy, Seville, J. P. K. (Jonathan P. K.) and Hsiau, Shu-San. (2009) Exploring the regime map for high-shear mixer granulation. Chemical Engineering Journal, Vol.145 (No.3). pp. 505-513. ISSN 13858947

Guo, Y., Kafui, K. D., Wu, C. -Y., Thornton, C. and Seville, J. P. K. (Jonathan P. K.). (2009) A coupled DEM/CFD analysis of the effect of air on powder flow during die filling. AIChE Journal, Vol.55 (No.1). pp. 49-62. ISSN 0001-1541

Miguelez-Moran, A. M., Wu, C. -Y. and Seville, J. P. K. (Jonathan P. K.). (2008) The effect of lubrication on density distributions of roller compacted ribbons. International Journal of Pharmaceutics, Vol.362 (No.1-2). pp. 52-59. ISSN 0378-5173

Seiler, C., Fryer, P. and Seville, J. P. K. (Jonathan P. K.). (2008) Statistical modelling of the spouted bed coating process using positron emission particle tracking (PEPT) data. Canadian Journal of Chemical Engineering, Vol.86 (No.3). pp. 571-581. ISSN 0008-4034