Malcenji, K., Goodship, V., Christmas, P., Smith, G. F. and Pearce, B.. (2010) A mixed plastic waste and de-inked residue composite from recycled paper waste products. Progress in Rubber Plastics and Recycling Technology, Vol.26 (No.2). pp. 93-106. ISSN 1477-7606

Smith, G. F., Goodship, V., Pearce, B. J. P. and Makenji, Kylash (2009) In mould process for electro active injection moulded components. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09)

Smith, G. F., Goodship, Vannessa, Ogur, E. O. (Erich Okoth), 1971- and Stidworthy, P. (2008) Smart 'in mould' manipulation of materials. In: Biennial Polymer Process Engineering International Meeting, Bradford, England, U.K., Jul 03-04, 2007. Published in: Plastics, Rubber and Composites, Vol.37 (No.2-4). pp. 88-95.

Smith, Gordon. (2008) Paint scheme. Materials World, Vol.16 (No.3). pp. 34-35. ISSN 0967-8638

Ogur, E. O. (Erich Okoth), 1971-, Davis, M. C., Goodship, Vannessa and Smith, G. F.. (2008) Effect of magnetic field on the distribution and orientation of magnetic particles in co-injection moulding. Progress in Rubber Plastics and Recycling Technology, Vol.24 (No.4). pp. 227-237. ISSN 1477-7606

Goodship, V. and Smith, G. F.. (2008) Removing the paint shop process: options for painting and decorating injection mouldings. International Journal of Environmental Technology and Management, Vol.8 (No.4). pp. 339-347. ISSN 1466-2132

Kirwan, Kerry, Johnson, R. M., Jacobs, D. K., Smith, G. F., Shepherd, L. and Tucker, N.. (2007) Enhancing properties of dissolution compounded Miscanthus giganteus reinforced polymer composite systems: Part 1. Improving flexural rigidity. Industrial Crops and Products, Vol.26 (No.1). pp. 14-27. ISSN 0926-6690

Goodship, V., Cook, N., Dargue, I., Lobjoit, C., Makenji, Kylash and Smith, G. F.. (2007) In mould painting using thermoset powder coating and thermoplastic substrate in closed tool injection moulding. Plastics, Rubber and Composites, Vol.36 (No.1). pp. 34-41. ISSN 1465-8011

Tucker, N., Johnson, M., Dargue, I., Kirwan, Kerry, Jacobs, D., Smith, Gordon and Pink, David (2005) 60 solvent compounding of natural fibre reinforced polymer composite systems. In: SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Portland, Oregon, USA, 7-9 Jun 2005 . Published in: Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental & Applied Mechanics June 7-9, 2005, Portland, Oregon, USA

Kirwan, Kerry and Smith, Gordon (2005) Inducing directional failure in polycarbonate glazing. In: Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment , University of Warwick, Coventry, UK., 7 - 8 Dec 2005. Published in: Proceedings of the Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment ; 7 - 8 December 2005 ; held at International Manufacturing Centre, University of Warwick, Coventry, UK

Kirwan, Kerry and Smith, Gordon (2004) Inducing directional failure in polycarbonate glazing. In: FISITA 2004 World Automotive Congress, Barcelona, Spain, 23-27 May 2004. Published in: FISITA 2004 World Automotive Congress 23-27 May, Barcelona, Spain

Kirwan, Kerry and Smith, Gordon (2004) Inducing one-way toughness in laminated polycarbonate glazing. In: Soft Extrusion Meeting 2004, Alvor, Portugal, 14-18 Oct 2004. Published in: Plastics, Rubber and Composites, Vol.33 (No.9-10). pp. 452-456.

Goodship, V., Kirwan, Kerry, Goodhead, T. C. and Smith, Gordon. (2003) Interfacial instabilities in multimaterial co-injection mouldings - Part 2 - Interfacial mixing in transparent mouldings. Plastics, Rubber and Composites, Vol.32 (No.3). pp. 98-103. ISSN 1465-8011

Kirwan, Kerry and Smith, Gordon (2003) Polymeric automotive body systems. In: 5th International Conference on Materials for Lean Weight Vehicles , International Manufacturing Centre, University of Warwick, Coventry, UK, 5-6 Nov 2003. Published in: 5th International Conference on Materials for Lean Weight Vehicles : 5 - 6 November 2003, [International Manufacturing Centre, University of Warwick, Coventry, UK]

Kirwan, Kerry and Smith, Gordon (2001) Glass reinforcing transparent polycarbonate glazing. United States: SAE Technical Papers. (Technical paper 2001-01-3076.

Kirwan, Kerry, Smith, Gordon and Singh, R. (2000) Dual injection molding and automotive glazing. United States: SAE Technical Papers. (Technical paper 2000-01-2689.

Bates, D. (Daniel), Smith, G. F., Lu, Dawei and Hewitt, J. (2000) Rapid NDT of composite aircraft components using lock-in ultrasonic and halogen lamp thermography. In: Proceedings of SPIE Non-destructive Evaluation , Newport Beach, California, 5th-9th March 1999. Published in: Nondestructive Evaluation of Aging Materials and Composites IV (Proceedings Volume), Vol.3993

Bates, D., Smith, G. F., Lu, Dawei and Hewit, J.. (2000) Rapid thermal non-destructive testing of aircraft components. Composites Part B: Engineering, Vol.31 (No.3). pp. 175-185. ISSN 1359-8368