The Library
Browse by Warwick Author
Up a level |
Number of items: 19.
Journal Article
Malcenji, K., Goodship, Vannessa, Christmas, P., Smith, G. F. and Pearce, B. (2010) A mixed plastic waste and de-inked residue composite from recycled paper waste products. Progress in Rubber Plastics and Recycling Technology, Vol.26 (No.2). pp. 93-106. ISSN 1477-7606.
Smith, G. F., Goodship, Vannessa, Ogur, E. O. and Stidworthy, P. (2008) Smart 'in mould' manipulation of materials. Plastics, Rubber and Composites, Vol.37 (No.2-4). pp. 88-95. doi:10.1179/174328908X283366 ISSN 1465-8011.
Smith, Gordon F. (2008) Paint scheme. Materials World, Volume 16 (Number 3). pp. 34-35. ISSN 0967-8638.
Ogur, E. O., Davis, M. C., Goodship, Vannessa and Smith, G. F. (2008) Effect of magnetic field on the distribution and orientation of magnetic particles in co-injection moulding. Progress in Rubber Plastics and Recycling Technology, Vol.24 (No.4). pp. 227-237. ISSN 1477-7606.
Goodship, Vannessa and Smith, G. F. (2008) Removing the paint shop process : options for painting and decorating injection mouldings. International Journal of Environmental Technology and Management, Vol.8 (No.4). pp. 339-347. doi:10.1504/IJETM.2008.017506 ISSN 1466-2132.
Kirwan, Kerry, Johnson, R. M., Jacobs, D. K., Smith, G. F., Shepherd, L. and Tucker, N. (2007) Enhancing properties of dissolution compounded Miscanthus giganteus reinforced polymer composite systems: Part 1. Improving flexural rigidity. Industrial Crops and Products, Vol.26 (No.1). pp. 14-27. doi:10.1016/j.indcrop.2006.12.013 ISSN 0926-6690.
Goodship, Vannessa, Cook, N., Dargue, I., Lobjoit, C., Makenji, Kylash and Smith, G. F. (2007) In mould painting using thermoset powder coating and thermoplastic substrate in closed tool injection moulding. Plastics, Rubber and Composites, Vol.36 (No.1). pp. 34-41. doi:10.1179/174328907X171217 ISSN 1465-8011.
Goodship, Vannessa, Kirwan, Kerry, Goodhead, T. C. and Smith, Gordon (2003) Interfacial instabilities in multimaterial co-injection mouldings - Part 2 - Interfacial mixing in transparent mouldings. Plastics, Rubber and Composites, Vol.32 (No.3). pp. 98-103. doi:10.1179/146580103225001345 ISSN 1465-8011.
Bates, D., Smith, G. F., Lu, Dawei and Hewit, J. (2000) Rapid thermal non-destructive testing of aircraft components. Composites Part B: Engineering, Vol.31 (No.3). pp. 175-185. doi:10.1016/S1359-8368(00)00005-6 ISSN 1359-8368.
Conference Item
Smith, G. F., Goodship, Vannessa, Pearce, B. J. P. and Makenji, Kylash (2009) In mould process for electro active injection moulded components. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09)
Tucker, N., Johnson, M., Dargue, I., Kirwan, Kerry, Jacobs, D., Smith, Gordon and Pink, David (2005) 60 solvent compounding of natural fibre reinforced polymer composite systems. In: SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Portland, Oregon, USA, 7-9 Jun 2005 . Published in: Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental & Applied Mechanics June 7-9, 2005, Portland, Oregon, USA ISSN 9780912053905.
Kirwan, Kerry and Smith, Gordon (2005) Inducing directional failure in polycarbonate glazing. In: Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment , University of Warwick, Coventry, UK., 7 - 8 Dec 2005. Published in: Proceedings of the Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment ; 7 - 8 December 2005 ; held at International Manufacturing Centre, University of Warwick, Coventry, UK ISSN 9780900685521.
Kirwan, Kerry and Smith, Gordon (2004) Inducing directional failure in polycarbonate glazing. In: FISITA 2004 World Automotive Congress, Barcelona, Spain, 23-27 May 2004. Published in: FISITA 2004 World Automotive Congress 23-27 May, Barcelona, Spain
Kirwan, Kerry and Smith, Gordon (2004) Inducing one-way toughness in laminated polycarbonate glazing. In: Soft Extrusion Meeting 2004, Alvor, Portugal, 14-18 Oct 2004. Published in: Plastics, Rubber and Composites, Vol.33 (No.9-10). pp. 452-456. doi:10.1179/174328904X48497 ISSN 1465-8011.
Britnell, David John, Tucker, N., Smith, G. F. and Wong, S. S. F. (2003) Bent pultrusion - a method for the manufacture of pultrudate with controlled variation in curvature. In: 9th International Manufacturing Conference, Hong Kong, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, Volume 138 (Special Issue). pp. 311-315. doi:10.1016/S0924-0136(03)00091-8 ISSN 0924-0136.
Kirwan, Kerry and Smith, Gordon (2003) Polymeric automotive body systems. In: 5th International Conference on Materials for Lean Weight Vehicles , International Manufacturing Centre, University of Warwick, Coventry, UK, 5-6 Nov 2003. Published in: 5th International Conference on Materials for Lean Weight Vehicles : 5 - 6 November 2003, [International Manufacturing Centre, University of Warwick, Coventry, UK]
Bates, D. (Daniel), Smith, G. F., Lu, Dawei and Hewitt, J. (2000) Rapid NDT of composite aircraft components using lock-in ultrasonic and halogen lamp thermography. In: Proceedings of SPIE Non-destructive Evaluation , Newport Beach, California, 5th-9th March 1999. Published in: Nondestructive Evaluation of Aging Materials and Composites IV (Proceedings Volume), Volume 3993 pp. 2-13. ISBN 0819436119. doi:10.1117/12.385476 ISSN 0277-786X.
Report
Kirwan, Kerry and Smith, Gordon (2001) Glass reinforcing transparent polycarbonate glazing. United States: SAE Technical Papers. (Technical paper 2001-01-3076).
Kirwan, Kerry, Smith, Gordon and Singh, R. (2000) Dual injection molding and automotive glazing. United States: SAE Technical Papers. (Technical paper 2000-01-2689).
This list was generated on Thu Mar 28 20:35:26 2024 GMT.