Turley, G. A., Williams, M. A. (Mark A.), Wellings, R. M. (Richard M.) and Griffin, Damian R.. (2012) Evaluation of range of motion restriction within the hip joint. Medical & Biological Engineering & Computing, Vol.51 (No.4). pp. 467-477. ISSN 1741-0444

Wellings, Tom, Pitts, Matthew and Williams, M. A. (Mark A.). (2012) Characterising the experience of interaction : an evaluation of automotive rotary dials. Ergonomics, Vol.15 (No.11). pp. 1298-1315. ISSN 0014-0139

Abulrub, Abdul-Hadi G., Yin, Yanting and Williams, M. A. (Mark A.) (2012) Acceptance and management of innovation in SMEs: immersive 3D visualisation. In: International Conference on Leadership, Technology and Innovation Management 2011, Antalya, Turkey, Oct 21-23, 2011. Published in: Procedia - Social and Behavioral Sciences, 41 pp. 304-314.

Turley, G. A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R.. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. ISSN 1092-9088

Norman, D., Thornby, J., Bird, J., Getgood, A., Thompson, P., Williams, M. A. (Mark A.) and Spaldig, T.. (2012) Quantitative topographic anatomy of the anterior cruciate ligament femoral footprint—do the ridges exist? Knee Surgery, Sports Traumatology, Arthroscopy, Vol.20 (No.1). p. 88. ISSN 0942-2056

Pitts, Matthew, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.). (2012) Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012 . p. 598739. ISSN 1687-5893

Kumar, Jagadeesha, Landheer, Dirk, Barnes-Warden, Jane, Fenne, Paul, Attridge, Alex and Williams, M. A. (Mark A.). (2012) Inconsistency in 9mm bullets measured with non-destructive X-ray computed tomography. Forensic Science International, Vol.214 (No.1-3). pp. 48-58. ISSN 03790738

Pitts, Matthew, Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.). (2012) Visual–haptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1). pp. 7-16. ISSN 0141-9382

Kumar, Jagadeesha, Abulrub, Abdul-Hadi G., Attridge, Alex and Williams, M. A. (Mark A.). (2012) Effect of X-ray computed tomography scanning parameters on the estimated porosity of foam specimens. Applied Mechanics and Materials, Vol.110-116 (Part 1-7). pp. 808-815. ISSN 1662-7482

Lamb, S. E. (Sallie E.), Williams, M. A. (Mark A.), Williamson, E. M., Gates, Simon, Withers, E. J., Mt-Isa, S., Ashby, D., Castelnuovo, E. (Emanuela), Underwood, M. (Martin) M.D. and Cooke, M. W.. (2012) Managing injuries of the neck trial (MINT) : a randomised controlled trial of treatments for whiplash injuries. Health technology assessment (Winchester, England), Vol.16 (No.49). pp. 1-141. ISSN 1366-5278

Kiraci, Ercihan, Attridge, Alex and Williams, M. A. (Mark A.). (2012) The use of laser scanning technology to improve the design process. Applied Mechanics and Materials, Vol.110-116 (Part 1-7). pp. 4118-4122. ISSN 1662-7482

Turley, G. A., Ahmed, S. M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R.. (2011) Establishing a range of motion boundary for total hip arthroplasty. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol.225 (No.8). pp. 769-782. ISSN 2041-3033

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.) and Rusinek, A.. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials & Design, Vol.32 (No.4). pp. 2246-2259. ISSN 0264-1275

Kumar, Jagadeesha, Attridge, Alex, Wood, P. K. C. and Williams, M. A. (Mark A.). (2011) Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, Vol.22 (No.3). Article: 035105. ISSN 0957-0233

Williams, M. A. (Mark A.), Attridge, Alex and Pitts, M. (Matthew). (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. ISSN 0143-3369

Abulrub, Abdul-Hadi G., Attridge, Alex and Williams, M. A. (Mark A.). (2011) Virtual reality in engineering education: the future of creative learning. International Journal of Emerging Technologies in Learning, Vol.6 (No.4). ISSN 1868-8799

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, C. (Charles). (2010) Understanding customers' holistic perception of switches in automotive human–machine interfaces. Applied Ergonomics, Vol.41 (No.1). pp. 8-17. ISSN 0003-6870

Pitts, Matthew J., Williams, M. A. (Mark A.), Wellings, Tom and Attridge, Alex (2009) Assessing subjective response to haptic feedback in automotive touchscreens. In: Automotive UI '09, Essen, Germany, 21-22 Sep 2009. Published in: 1st International Conference on Automotive User Interfaces and Interactive Vehicular Applications (AutomotiveUI 2009) pp. 11-18.

Turley, G. A. and Williams, M. A. (Mark A.) (2009) Metrology applications in body-segment coordinate systems. In: 13th International Conference on Biomedical Engineering (ICBME), Singapore, Singapore, December 03-06, 2008. Published in: 13th International Conference on Biomedical Engineering, Vols.1-3, Vol.23 (No.1-3). pp. 1604-1607.

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.), Beaumont, R., Rusinek, A., Mayer, U. and Pearce, A. (2009) A method to calibrate a specimen with strain gauges to measure force over the full-force range in high rate testing. In: 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Royal Mil Acad, Brussels, Belgium, September 07-11, 2009. Published in: DYMAT 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading Volume 1, 1 pp. 265-273.

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. ISSN 0950-3293

Attridge, Alex, Williams, M. A. (Mark A.), Wellings, Tom and Pitts, Matthew (2008) Developing the next generation of automotive human machine interface (HMI). In: Warwick Innovative Manufacturing Research Centre (WIMRC) Annual Conference, Warwick Manufacturing Group (WMG), The University of Warwick, Coventry, 2008 (Unpublished)

Pitts, Matthew and Williams, M. A. (Mark A.) (2008) Diagnosis and resolution of a customer-defined satisfaction issue in automotive user controls. In: 6th International Design and Emotion Conference - Dare to Desire, School of Design, Hong Kong Polytechnic University, Hong Kong, China, Oct 6-9, 2008. Published in: Proceedings of the 6th International Design and Emotion Conference

Attridge, Alex, Pitts, Matthew and Williams, M. A. (Mark A.) (2008) A human-centred approach to the design and evaluation of automotive seat adjustment controls. In: 6th International Design and Emotion Conference - Dare to Desire, School of Design, Hong Kong Polytechnic University, Hong Kong, China, Oct 6-9, 2008. Published in: Proceedings of the 6th International Design and Emotion Conference

Chalmers, Alan, Williams, M. A. (Mark A.), Artusi, Alessandro, Attridge, Alex, Debbattista, K. and Banterle, Francesco (2007) High dynamic range imagery. In: Royal Photographic Society – Image Science Group: Digital Futures 2007, Royal Institute of British Architects, London, UK, 30th October 2007

Williams, M. A. (Mark A.), Kochhar, A. K. and Tennant, C.. (2007) An object-oriented reference model of the fuzzy front end of the new product introduction process. International Journal of Advanced Manufacturing Technology, Vol.34 (No.7-8). pp. 826-841. ISSN 0268-3768

Turley, G. A., Williams, M. A. (Mark A.) and Tennant, Charles. (2007) Final vehicle product audit methodologies within the automotive industry. International Journal of Productivity and Quality Management, 2 (1). pp. 1-22. ISSN 1746-6482

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew (2007) The customer, automotive switch-feel, and the New Product Introduction process. In: 7th Pangborn Sensory Science Symposium, Minneapolis, MN, USA, August 12–16, 2007

Attridge, Alex, Williams, M. A. (Mark A.) and Tennant, Charles. (2007) The role of physical modelling in the design verification stage of the automotive NPI process in the premium sector. International Journal of Automotive Technology and Management, 7 (1). pp. 32-54. ISSN 1470-9511

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Tactility, craftsmanship and the NPI process. SAE International. (SAE Technical Papers.

Attridge, Alex, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Achieving craftsmanship targets across the UK automotive supply base, through the use of quality maturation tools and processes. In: SAE World Congress 2005, Detroit, Michigan, 11 Apr 2005. Published in: SAE Technical Paper Article no. 2005-01.

Scotland, Robert, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Communication of craftsmanship targets to the supply base. In: IEEE International Engineering Management Conference, St Johns, Canada, 11-13 Sep 2005. Published in: 2005 IEEE International Engineering Management Conference, Vols 1 and 2 pp. 12-15.

Turley, G. A., Williams, M. A. (Mark A.) and Tennant, Charles (2005) Expanding product audit methodology throughout the automotive supply chain to facilitate improvement in craftsmanship during new product introduction. In: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy, Melbourne, Australia, Aug 2005. Published in: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy pp. 87-88.

Radford, James, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Improving communication of design target requirements to facilitated enhanced craftsmanship delivery. In: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy, Melbourne, Australia, Aug 2005. Published in: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy pp. 89-90.

Kochhar , Ashok K and Williams, M. A. (Mark A.) (2001) Modelling the front end of the new product introduction process for rapid product development. In: POMS 2001, Orlando, Florida, Mar 30- 2 Apr 2001. Published in: Proceedings of the Twelfth Annual Conference of the Production and Operations Management Society, POM- 2001 pp. 1-9.

Williams, M. A. (Mark A.) and Kochhar, A. K.. (2000) New product introduction practices in the British manufacturing industry. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (10). pp. 853-863. ISSN 0954-4054

Williams, M. A. (Mark A.) and Kochlar, A. K. (1997) Object oriented reference model : the fuzzy front end of the new product introduction process. In: International MATADOR Conference, Manchester, UK, 10-11 Jul 1997. Published in: Proceedings of the thirty-second International MATADOR Conference : held in Manchester 10th-11th July 1997 pp. 59-65.

Williams, M., Williams, M. A. (Mark A.) and Vosniakos, G. (1997) On reference modelling of integrated manufacturing systems using Object-Oriented Analysis (OOA). In: IFIP Transactions B-17, Information Infrastructure Systems For Manufacturing. UNSPECIFIED, pp. 91-102. ISBN 0444818502