ALSTOM Power UK

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Advantage West Midlands (AWM)

Fisher, Craig A., Jennings, M. R., Sharma, Yogesh K., Hamilton, Dean P., Li, Fan, Gammon, P. M., Pérez-Tomás, Amador, Thomas, Stephen M., Burrows, S. E. (Susan E.) and Mawby, P. A. (Philip A.) (2014) On the application of novel high temperature oxidation processes to enhance the performance of high voltage silicon carbide PiN diodes. In: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), , Finland, 26-28 Aug 2014. Published in: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), pp. 1-9. doi:10.1109/EPE.2014.6910738

Alahakoon, W. P. C. M., Burrows, S. E. (Susan E.), Howes, Andrew P., Karunaratne, B. S. B., Smith, Mark E. and Dobedoe, Richard Simon (2010) Fully densified zircon co-doped with iron and aluminium prepared by sol-gel processing. Journal of the European Ceramic Society, Vol.30 (No.12). pp. 2515-2523. doi:10.1016/j.jeurceramsoc.2010.05.011

Airbus

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Asian Development Bank (ADB)

Alahakoon, W. P. C. M., Burrows, S. E. (Susan E.), Howes, Andrew P., Karunaratne, B. S. B., Smith, Mark E. and Dobedoe, Richard Simon (2010) Fully densified zircon co-doped with iron and aluminium prepared by sol-gel processing. Journal of the European Ceramic Society, Vol.30 (No.12). pp. 2515-2523. doi:10.1016/j.jeurceramsoc.2010.05.011

Birmingham Science City

Fisher, Craig A., Jennings, M. R., Sharma, Yogesh K., Hamilton, Dean P., Li, Fan, Gammon, P. M., Pérez-Tomás, Amador, Thomas, Stephen M., Burrows, S. E. (Susan E.) and Mawby, P. A. (Philip A.) (2014) On the application of novel high temperature oxidation processes to enhance the performance of high voltage silicon carbide PiN diodes. In: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), , Finland, 26-28 Aug 2014. Published in: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), pp. 1-9. doi:10.1109/EPE.2014.6910738

Engineering and Physical Sciences Research Council (EPSRC)

Fisher, Craig A., Jennings, M. R., Sharma, Yogesh K., Hamilton, Dean P., Li, Fan, Gammon, P. M., Pérez-Tomás, Amador, Thomas, Stephen M., Burrows, S. E. (Susan E.) and Mawby, P. A. (Philip A.) (2014) On the application of novel high temperature oxidation processes to enhance the performance of high voltage silicon carbide PiN diodes. In: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), , Finland, 26-28 Aug 2014. Published in: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), pp. 1-9. doi:10.1109/EPE.2014.6910738

Petcher, P. A., Burrows, S. E. (Susan E.) and Dixon, Steve M. (2014) Shear horizontal (SH) ultrasound wave propagation around smooth corners. Ultrasonics, Volume 54 (Number 4). pp. 997-1004. doi:10.1016/j.ultras.2013.11.011

Burrows, S. E. (Susan E.), McAughey, Kevin L., Edwards, R. S. (Rachel S.) and Dixon, S. (2012) Sol–gel prepared bismuth titanate for high temperature ultrasound transducers. RSC Advances , Volume 2 (Number 9). pp. 3678-3683. doi:10.1039/c2ra20243c

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Yichao (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. doi:10.1016/j.ultras.2010.05.002

Vives, Eduard, Burrows, S. E. (Susan E.), Edwards, R. S. (Rachel S.), Dixon, S., Mañosa, Lluís, Planes, Antoni and Roméro, Ricardo (2011) Temperature contour maps at the strain-induced martensitic transition of a Cu–Zn–Al shape-memory single crystal. Applied Physics Letters, Vol.98 (No.1). 011902. doi:10.1063/1.3533403

Alahakoon, W. P. C. M., Burrows, S. E. (Susan E.), Howes, Andrew P., Karunaratne, B. S. B., Smith, Mark E. and Dobedoe, Richard Simon (2010) Fully densified zircon co-doped with iron and aluminium prepared by sol-gel processing. Journal of the European Ceramic Society, Vol.30 (No.12). pp. 2515-2523. doi:10.1016/j.jeurceramsoc.2010.05.011

European Regional Development Fund (ERDF)

Fisher, Craig A., Jennings, M. R., Sharma, Yogesh K., Hamilton, Dean P., Li, Fan, Gammon, P. M., Pérez-Tomás, Amador, Thomas, Stephen M., Burrows, S. E. (Susan E.) and Mawby, P. A. (Philip A.) (2014) On the application of novel high temperature oxidation processes to enhance the performance of high voltage silicon carbide PiN diodes. In: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), , Finland, 26-28 Aug 2014. Published in: 2014 16th European Conference on Power Electronics and Applications (EPE'14-ECCE Europe), pp. 1-9. doi:10.1109/EPE.2014.6910738

Alahakoon, W. P. C. M., Burrows, S. E. (Susan E.), Howes, Andrew P., Karunaratne, B. S. B., Smith, Mark E. and Dobedoe, Richard Simon (2010) Fully densified zircon co-doped with iron and aluminium prepared by sol-gel processing. Journal of the European Ceramic Society, Vol.30 (No.12). pp. 2515-2523. doi:10.1016/j.jeurceramsoc.2010.05.011

Great Britain. Dept. of Trade and Industry (DTI)

Pérez-Tomás, Amador, Lodzinski, M., Guy, O. J., Jennings, M. R., Placidi, M., Llobet, J., Gammon, P. M., Davis, M. C., Covington, James A., Burrows, S. E. and Mawby, P. A. (2009) Si/SiC bonded wafer: a route to carbon free SiO2 on SiC. Applied Physics Letters, Vol.94 (No.10). Article: 103510. doi:10.1063/1.3099018

Jennings, M. R., Pérez-Tomás, Amador, Guy, O. J., Hammond, Richard, Burrows, S. E., Gammon, P. M., Lodzinski, M., Covington, James A. and Mawby, P. A. (2008) Si/SiC heterojunctions fabricated by direct wafer bonding. Electrochemical and Solid State Letters, Vol.11 (No.11). H306-H308. doi:10.1149/1.2976158

National Nuclear Laboratory (Great Britain)

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Yichao (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. doi:10.1016/j.ultras.2010.05.002

Npower (Firm)

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

RWE Energie (Firm)

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001

RWE npower plc

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Yichao (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. doi:10.1016/j.ultras.2010.05.002

Research Centre for Non-Destructive Evaluation (RCNDE)

Burrows, S. E. (Susan E.), McAughey, Kevin L., Edwards, R. S. (Rachel S.) and Dixon, S. (2012) Sol–gel prepared bismuth titanate for high temperature ultrasound transducers. RSC Advances , Volume 2 (Number 9). pp. 3678-3683. doi:10.1039/c2ra20243c

Research Centre in Non Destructive Evaluation (RCNDE)

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Rolls-Royce Group plc

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001

Almond, Darryl, Weekes, B., Li, Teng, Pickering, S. G., Kostson, E., Wilson, J., Tian, G. Y., Dixon, S. and Burrows, S. E. (Susan E.) (2011) Thermographic techniques for the detection of cracks in metallic components. Insight - Non-Destructive Testing and Condition Monitoring, Vol.53 (No.11). pp. 614-620. doi:10.1784/insi.2011.53.11.614

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Yichao (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. doi:10.1016/j.ultras.2010.05.002

Royal Society (Great Britain)

Vives, Eduard, Burrows, S. E. (Susan E.), Edwards, R. S. (Rachel S.), Dixon, S., Mañosa, Lluís, Planes, Antoni and Roméro, Ricardo (2011) Temperature contour maps at the strain-induced martensitic transition of a Cu–Zn–Al shape-memory single crystal. Applied Physics Letters, Vol.98 (No.1). 011902. doi:10.1063/1.3533403

Spain. Ministerio de Ciencia e Innovación (MICINN)

Vives, Eduard, Burrows, S. E. (Susan E.), Edwards, R. S. (Rachel S.), Dixon, S., Mañosa, Lluís, Planes, Antoni and Roméro, Ricardo (2011) Temperature contour maps at the strain-induced martensitic transition of a Cu–Zn–Al shape-memory single crystal. Applied Physics Letters, Vol.98 (No.1). 011902. doi:10.1063/1.3533403

Spain. Ministerio de Educación, Cultura y Deporte

Vives, Eduard, Burrows, S. E. (Susan E.), Edwards, R. S. (Rachel S.), Dixon, S., Mañosa, Lluís, Planes, Antoni and Roméro, Ricardo (2011) Temperature contour maps at the strain-induced martensitic transition of a Cu–Zn–Al shape-memory single crystal. Applied Physics Letters, Vol.98 (No.1). 011902. doi:10.1063/1.3533403

UK Research Centre in Nondestructive Evaluation (RCNDE)

Burrows, S. E. (Susan E.), Dixon, S., Pickering, S. G., Li, T. (Teng) and Almond, Darryl (2011) Thermographic detection of surface breaking defects using a scanning laser source. NDT & E International, Vol.44 (No.7). pp. 589-596. doi:10.1016/j.ndteint.2011.06.001

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Yichao (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. doi:10.1016/j.ultras.2010.05.002

University of Warwick

Alahakoon, W. P. C. M., Burrows, S. E. (Susan E.), Howes, Andrew P., Karunaratne, B. S. B., Smith, Mark E. and Dobedoe, Richard Simon (2010) Fully densified zircon co-doped with iron and aluminium prepared by sol-gel processing. Journal of the European Ceramic Society, Vol.30 (No.12). pp. 2515-2523. doi:10.1016/j.jeurceramsoc.2010.05.011