Adegoke, Elijah, Zidane, Jasmine, Kampert, Erik, Ford, Col R., Birrell, Stewart A. and Higgins, Matthew D. (2019) Infrastructure Wi-Fi for connected autonomous vehicle positioning : a review of the state-of-the-art. Vehicular Communications, 20 . 100185. doi:10.1016/j.vehcom.2019.100185

Adegoke, Elijah, Zidane, Jasmine, Kampert, Erik, Jennings, P. A. (Paul A.), Ford, Colin, Birrell, Stewart A. and Higgins, Matthew D. (2019) Evaluating machine learning & antenna placement for enhanced GNSS accuracy for CAVs. In: 2019 IEEE Intelligent Vehicles Symposium, Paris, France, 9-12 Jun 2019. Published in: IEEE Xplore (In Press)

Agca, Ahmet Onur, Ignatius, Joshua, Godsell, Janet and Ozden, Mucahit (2019) Demystifying supply chain visibility - a systematic literature review. In: 26th EurOMA Conference, Helsinki, 2019, Helsinki, 17-19 Jun 2019

Aghadavoudi-Jolfaei, M., Shen, J., Smith, A., Zhou, Lei and Davis, Claire (2019) Non-destructive measurement of microstructure and tensile strength in varying thickness commercial DP steel strip using an EM sensor. Journal of Magnetism and Magnetic Materials, 473 . pp. 477-483. doi:10.1016/j.jmmm.2018.10.099

Ahmad, Bilal and Mohammed, Abdul Rehan Khan (2019) Manufacturing enhancement through reduction of cycle time using time-study statistical techniques in automotive industry. In: ICPS2019 IEEE International Conference on Industrial Cyber-Physical Systems, Taipei, Taiwan, 6-9 May 2019. Published in: Proceedings of ICPS 2019 ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780198

Aljarrah, Omar, Maple, Carsten, Dianati, Mehrdad, Oxtoby, David and Mouzakitis, Alexandros (2019) Intrusion detection systems for intra-vehicle networks : a review. IEEE Access, 7 (1). pp. 21266-21289. doi:10.1109/ACCESS.2019.2894183

Alkan, Bugra (2019) An experimental investigation on the relationship between perceived assembly complexity and product design complexity. International Journal of Interactive Design and Manufacturing, 13 (3). pp. 1145-1157. doi:10.1007/s12008-019-00556-9

Alkan, Bugra and Harrison, Robert (2019) A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53 . pp. 18-31. doi:10.1016/j.jmsy.2019.09.001 (In Press)

Allen, B., Pelham, T., Wu, Y., Drysdale, T., Isakov, Dmitry, Gamlath, C., Stevens, C., Hilton, G., Grant, P. S. and Beach, M. A. (2019) Experimental evaluation of 3D printed spiral phase plates for enabling an orbital angular momentum multiplexed radio system. Royal Society Open Science, 6 (12). pp. 1-14. doi:10.1098/rsos.191419

Allen, Frances M., Cain, Rebecca and Meyer, Caroline (2019) How people with dementia and their carers adapt their homes. A qualitative study. Dementia, 18 (3). pp. 1199-1215. doi:10.1177/1471301217712294

Alluhaibi, Osama, Kampert, Erik, Jennings, Paul. A. and Higgins, Matthew D. (2019) Impact of overlapped AoAs on the achievable uplink rate of hybrid beamforming for massive MIMO mm-Wave Systems for industrial environments. IEEE Access, 7 . pp. 101178-101194. doi:10.1109/ACCESS.2019.2930746

Amamra, Sid-Ali and Marco, James (2019) Vehicle-to-grid aggregator to support power grid and reduce electric vehicle charging cost. IEEE Access . doi:10.1109/ACCESS.2019.2958664 (In Press)

Amamra, Sid-Ali, Shi, Kai, Dinh, Truong Quang and Marco, James (2019) Optimal day ahead scheduling for plug-in electric vehicles in an industrial microgrid based on V2G system. In: ICMT 2019 - 23rd International Conference on Mechatronics Technology, Italy, 23 – 26 Oct 2019

Angelopoulou, O., Pourmoafi, S., Jones, A. and Sharma, G. (2019) Killing your device via your USB port. In: Thirteenth International Symposium on Human Aspects of Information Security & Assurance, Nicosia, Cyprus, 15-16 Jul 2019 . Published in: Proceedings of the Thirteenth International Symposium on Human Aspects of Information Security & Assurance (HAISA 2019) pp. 61-72. ISBN 9780244190965.

Aqra, Iyad, Abdul Ghani, Norjihan, Maple, Carsten, Machado, José and Sohrabi Safa, Nader (2019) Incremental algorithm for association rule mining under dynamic threshold. Applied Sciences, 9 (24). 5398. doi:10.3390/app9245398

Arnold, Eduardo, Al-Jarrah, Omar Y., Dianati, Mehrdad, Fallah, Saber, Oxtoby, David and Mouzakitis, Alexandros (2019) A survey on 3D object detection methods for autonomous driving applications. IEEE Transactions on Intelligent Transportation Systems, 20 (10). pp. 3782-3795. doi:10.1109/TITS.2019.2892405

Assad, Fadi, Alkan, Bugra, Chinnathai, M. K., Ahmad, Mus'ab, Rushforth, Emma and Harrison, Robert (2019) A framework to predict energy related key performance indicators of manufacturing systems at early design phase. In: CIRP CMS 2019 , Ljubljana, Slovenia, 12-14 Jun 2019. Published in: Procedia CIRP, 81 pp. 145-150. ISSN 2212-8271. doi:10.1016/j.procir.2019.03.026

Atmaca, U. I., Maple, Carsten and Dianati, Mehrdad (2019) Emerging privacy challenges and approaches in CAV systems. In: Living in the Internet of Things (IoT 2019), London, UK, 1-2 May 2019 ISBN 9781839530890. doi:10.1049/cp.2019.0141

Babu, Manoj, Franciosa, Pasquale and Ceglarek, Dariusz (2019) Spatio-temporal adaptive sampling for effective coverage measurement planning during quality inspection of free form surfaces using robotic 3D optical scanner. Journal of Manufacturing Systems, 53 . pp. 93-108. doi:10.1016/j.jmsy.2019.08.003

Baier, Waltraud, Mangham, Chas, Warnett, Jason M., Payne, Mark, Painter, Michelle and Williams, M. A. (2019) Using histology to evaluate micro-CT findings of trauma in three post-mortem samples — First steps towards method validation. Forensic Science International, 297 . pp. 27-34. doi:10.1016/j.forsciint.2019.01.027

Bandi, Bharath, Santillana, Begona, Tiekink, Wouter, Koura, Nadia, Williams, Mark A. and Srirangam, Prakash (2019) 2D automated SEM and 3D X-ray computed tomography study on inclusion analysis of steels. Ironmaking & Steelmaking . doi:10.1080/03019233.2019.1652437 (In Press)

Bandi, Bharath, van Krevel, Joost, Aslam, Numan and Srirangam, Prakash (2019) A model and experimental validation to predict heating rates for overlap between ferrite recrystallization and austenite transformation in dual phase steel manufacture. JOM, 71 (4). pp. 1386-1395. doi:10.1007/s11837-019-03358-2

Barai, Anup, Uddin, Kotub, Dubarry, Matthieu, Somerville, Limhi, McGordon, Andrew, Jennings, P. A. (Paul A.) and Bloom, Ira (2019) A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells. Progress in Energy and Combustion Science, 72 . pp. 1-31. doi:10.1016/j.pecs.2019.01.001

Bergmeier, Heidi, Hill, Briony, Haycraft, Emma, Blewitt, Claire, Lim, Siew, Meyer, Caroline and Skouteris, Helen (2019) Maternal body dissatisfaction in pregnancy, postpartum and early parenting : an overlooked factor implicated in maternal and childhood obesity risk. Appetite . 104525. doi:10.1016/j.appet.2019.104525 (In Press)

Bhalodiya, Jayendra Maganbhai, Palit, Arnab, Ferrante, Enzo, Tiwari, Manoj K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, Mark A. (2019) Hierarchical template matching for 3D myocardial tracking and cardiac strain estimation. Scientific Reports, 9 . 12450. doi:10.1038/s41598-019-48927-2

Bilici, Eda, Despotou, George and Arvanitis, Theodoros N. (2019) Concurrent execution of multiple computer-interpretable clinical practice guidelines and their interrelations. In: Mantas, John and Hasman, Arie and Gallos, Parisis and Kolokathi, Aikaterini, (eds.) Health Informatics Vision: From Data via Information to Knowledge. Studies in Health Technology and Informatics, 262 . I O S Press, pp. 7-10. ISBN 9781614999867

Boyes, Hugh (2019) Solutions for systems engineering resilience and security. (Submitted)

Boyes, Hugh and Watson, Tim (2019) Towards a secure and resilient IoT architecture for smart home energy management. In: Living in the Internet of Things, London, 1-2 May 2019. Published in: Proceedings of Living in the Internet of Things ISBN 9781839530890. doi:10.1049/cp.2019.0161

Bradbury, Matthew S., Jhumka, Arshad and Maple, Carsten (2019) The impact of decreasing transmit power levels on FlockLab to achieve a sparse network. In: 2nd Workshop on Benchmarking Cyber-Physical Systems and Internet of Things, Montreal, Canada, 15 Apr 2019. Published in: CPS-IoTBench '19 : Proceedings of the 2nd Workshop on Benchmarking Cyber-Physical Systems and Internet of Things pp. 7-12. ISBN 9781450366939. doi:10.1145/3312480.3313171

Bui, Truong Minh Ngoc, Faraji-Niri, Mona, Worwood, Daniel, Dinh, Truong Quang and Marco, James (2019) An advanced hardware-in-the-loop battery simulation platform for the experimental testing of battery management system. In: 23rd International Conference on Mechatronics Technology (ICMT2019), University of Salerno, Salerno, Italy, 23-26 Oct 2019

Burns, Christopher , Oliveira, Luis, Thomas, Peter, Iyer, Sumeet and Birrell, Stewart A. (2019) Pedestrian decision-making responses to external human-machine interface designs for autonomous vehicles. In: IEEE Intelligent Vehicles Symposium (IV) , Paris, France, 9-12 Jun 2019. Published in: 2019 IEEE Intelligent Vehicles Symposium (IV) pp. 70-75. ISBN 9781728105604 . ISSN 2642-7214 . doi:10.1109/IVS.2019.8814030

Cannizzaro, Sara, Procter, Rob, Ma, Sinong and Maple, Carsten (2019) Adoption and acceptability of smart devices for the home. In: Petras IoT Conference, London, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) ISBN 9781839530890. doi:10.1049/cp.2019.0153

Carvalho, Graca, Ritchie, Alisdair and Fradkin, E. D. (2019) Innovation ecosystems : greater than the sum of their parts? In: Living in the Internet of Things (IoT 2019), London, UK, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) p. 26. ISBN 9781839530890. doi:10.1049/cp.2019.0151

Chagas, Luciana Gomes, Jeong, Sangsik, Hasa, Ivana and Passerini, Stefano (2019) Ionic liquid-based electrolytes for sodium-ion batteries : tuning properties to enhance the electrochemical performance of manganese-based layered oxide cathode. ACS Applied Materials & Interfaces, 11 (25). pp. 22278-22289. doi:10.1021/acsami.9b03813

Chakuu, Sumeer, Masi, Donato and Godsell, Janet (2019) Exploring the relationship between mechanisms, actors and instruments in supply chain finance : a systematic literature review. International Journal of Production Economics, 216 . pp. 35-53. doi:10.1016/j.ijpe.2019.04.013

Chen, Fei, Xie, Fengwei, Liu, Peng and Chen, Pei (2019) Structure, thermal stability and suspension rheological properties of alcohol-alkali-treated waxy rice starch. International Journal of Biological Macromolecules, 134 . pp. 397-404. doi:10.1016/j.ijbiomac.2019.05.009

Chen, Huan, Xie, Fengwei, Chen, Ling and Zheng, Bo (2019) Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors. Journal of Food Engineering, 244 . pp. 150-158. doi:10.1016/j.jfoodeng.2018.09.011

Cheng, Chuan, Drummond, Ross, Duncan, Stephen R. and Grant, Patrick S. (2019) Micro-scale graded electrodes for improved dynamic and cycling performance of Li-ion batteries. Journal of Power Sources, 413 . pp. 59-67. doi:10.1016/j.jpowsour.2018.12.021

Chi, Chengdeng, Li, Xiaoxi, Zhang, Yiping, Chen, Ling, Xie, Fengwei, Li, Lin and Bai, Guanghui (2019) Modulating in vitro digestibility and predicted glycemic index of rice starch gels by complexation with gallic acid. Food Hydrocolloids, 89 . pp. 821-828. doi:10.1016/j.foodhyd.2018.11.016

Chin, Seow J., Doherty, Matthew, Vempati, Sesha, Dawson, Paul, Byrne, Cormac, Meenan, Brian J., Guerra, Valentina and McNally, Tony (2019) Solvothermal synthesis of graphene oxide and its composites with poly(ε-caprolactone). Nanoscale, 11 (40). pp. 18672-18682. doi:10.1039/C9NR04202D

Chiu, Y-C., Chen, K-W., Schönemann, R., Quito, V. L., Sur, S., Zhou, Q., Graf, D., Kampert, Erik, Förster, T., Yang, K., McCandless, G. T., Chan, Julia Y., Baumbach, R. E., Johannes, M. D. and Balicas, L. (2019) Origin of the butterfly magnetoresistance in a Dirac nodal-line system. Physical Review B, 100 (12). 125112. doi:10.1103/PhysRevB.100.125112

Clohessy, Sophie, Walasek, Lukasz and Meyer, Caroline (2019) Factors influencing employees’ eating behaviours in the office-based workplace : a systematic review. Obesity Reviews, 20 (12). pp. 1771-1780. doi:10.1111/obr.12920

D'Souza, N., Li, W., Argyrakis, C., West, Geoffrey D. and Slater, Carl (2019) On the evolution of primary gamma prime precipitates during high temperature and high strain rate deformation and subsequent heat treatment in the Ni-based superalloy, RR1000. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-019-05330-w (In Press)

Dancer, Claire E. J., Spawton, J. N. F., Falco, S., Petrinic, N. and Todd, R. I. (2019) Characterisation of damage mechanisms in oxide ceramics indented at dynamic and quasi-static strain rates. Journal of the European Ceramic Society, 39 (15). pp. 4936-4945. doi:10.1016/j.jeurceramsoc.2019.06.054

Dar, Bilal Khalid, Shah, Munam Ali, Islam, Saif Ul, Maple, Carsten, Mussadiq, Shafaq and Khan, Suleman (2019) Delay-aware accident detection and response system using fog computing. IEEE Access, 7 . pp. 70975-70985. doi:10.1109/ACCESS.2019.2910862

Das, Abhishek, Barai, Anup, Masters, Iain and Williams, David K. (2019) Comparison of tab-to-busbar ultrasonic joints for electric vehicle li-ion battery applications. World Electric Vehicle Journal, 10 (3). 55. doi:10.3390/wevj10030055

Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, David K. (2019) Evaluation of key geometrical and mechanical properties for remote laser welded AC-170PX aluminium joints. Journal of Laser Micro/Nanoengineering, 14 (1). doi:10.2961/jlmn.2019.01.0001

Das, Abhishek, Li, Dezhi, Williams, David K. and Greenwood, David G. (2019) Weldability and shear strength feasibility study for automotive electric vehicle battery tab interconnects. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (1). 54. doi:10.1007/s40430-018-1542-5

Das, Abhishek, Rajan, Ashwin T. and Barai, Anup (2019) Modelling and characterisation of ultrasonic joints for Li-ion batteries to evaluate the impact on electrical resistance and temperature raise. Journal of Energy Storage, 22 . pp. 239-248. doi:10.1016/j.est.2019.02.017

De Giovanni, Mario, Kaduk, James and Srirangam, Prakash (2019) Modification of Al-Si alloys by Ce or Ce with Sr. JOM, 71 (1). pp. 426-434. doi:10.1007/s11837-018-3192-6

Derlyatka, Anton , Fomenko, Oleg , Eck, Felicia, Khmelev, Egor and Elliott, Mark T. (2019) Bright spots, physical activity investments that work : sweatcoin : a steps generated virtual currency for sustained physical activity behaviour change. British Journal of Sports Medicine . doi:10.1136/bjsports-2018-099739

Despotou, George, Yuksel, Mustafa, Laleci, Gokce, Keenoy, Esteban De Manuel, Lim Choi Keung, Sarah Niukyun, Verdoy Berastegui, Dolores, Zhao, Lei and Arvanitis, Theodoros N. (2019) Facilitating coordinated care for multi-morbidity patients through integrated preventive Clinical Decision Support (C3-Cloud). In: 19th International Conference on Integrated Care, San Sebastian, 1-3 Apr 2019. Published in: International Journal of Integrated Care, 19 (4). ISSN 1568-4156. doi:10.5334/ijic.s3029

Despotou, George, Yuksel, Mustafa, Sarigul, Bunyamin and Arvanitis, Theodoros N. (2019) Drug interaction advisory service for clinical decision support of multimordity patient centric care plans in the C3-cloud system. In: Mantas, John and Hasman, Arie and Gallos, Parisis and Aikaterini, Kolokathi, (eds.) Health Informatics Vision : From Data via Information to Knowledge. Studies in Health Technology and Informatics, 262 . I O S Press, pp. 388-391. ISBN 9781614999867

Dias, F. T., Vieira, V. N., Oliveira, C. P., Silva, D. L., Mesquita, F., Lima, J. R., Wolff-Fabris, F., Kampert, Erik and Pureur, P. (2019) Gaussian and critical scalings in the magnetoconductivity fluctuations of Y3Ba5Cu8O18 superconductor. International Journal of Modern Physics B, 32 (32). 1850360. doi:10.1142/S0217979218503605

Dinda, Soumitra Kumar, kar, Jyotirmaya, Jana, Subhodeep, Gopal Roy, Gour and Srirangam, Prakash (2019) Effect of beam oscillation on porosity and intermetallics of electron beam welded DP600-steel to Al 5754-alloy. Journal of Materials Processing Technology, 265 . pp. 191-200. doi:10.1016/j.jmatprotec.2018.10.026

Ding, Xiaohan, Ding, Guiguang, Guo, Yuchen, Han, Jungong and Yan, Chenggang (2019) Approximated oracle filter pruning for destructive CNN width optimization. In: ICML 2019 ; 36th International Conference on Machine Learning, California, 10-15 Jun 2019. Published in: Proceedings of the 36th International Conference on Machine Learning

Dubarry, Matthieu, Baure, George, Pastor-Fernandez, Carlos, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Battery energy storage system modeling : a combined comprehensive approach. Journal of Energy Storage, 21 . pp. 172-185. doi:10.1016/j.est.2018.11.012

Dubarry, Matthieu, Pastor-Fernández, Carlos, Baure, George, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Battery energy storage system modeling : investigation of intrinsic cell-to-cell variations. Journal of Energy Storage, 23 . pp. 19-28. doi:10.1016/j.est.2019.02.016

El-Zehairy, A. A., Nezhad, M. Mousavi, Joekar-Niasar, V., Guymer, I., Kourra, N. and Williams, M. A. (2019) Pore-network modelling of non-Darcy flow through heterogeneous porous media. Advances in Water Resources, 131 . 103378. doi:10.1016/j.advwatres.2019.103378

Elliott, Mark T., Eck, Felicia, Khmelev, Egor, Derlyatka, Anton and Fomenko, Oleg (2019) Physical activity behaviour change driven from engagement with an incentive-based app : evaluating the impact of Sweatcoin. JMIR mHealth and uHealth, 7 (7). e12445 . doi:10.2196/12445

Faraji Niri, Mona, Marco, James, Dinh, Quang Truong and Yu, Tung Fai (2019) Two layer Markov model for prediction of future load and end of discharge time of batteries. In: International Conference on Mechatronics Technology , Salerno, Italy, 23-26 Dec 2019

Farrell, Marie, Bradbury, Matthew S., Fisher, Michael, Dennis, Louise A., Dixon, Claire, Yuan, Hu and Maple, Carsten (2019) Using threat analysis techniques to guide formal verification : a case study of cooperative awareness messages. In: SEFM 2019: 17th edition of the International Conference on Software Engineering and Formal Methods, Oslo, Norway, 16-20 Sep 2020. Published in: International Conference on Software Engineering and Formal Methods, 11724 pp. 471-490. ISBN 9783030304454. doi:10.1007/978-3-030-30446-1_25

Fernandes, Felipe C., Kirwan, Kerry, Wilson, Peter R. and Coles, Stuart R. (2019) Sustainable alternative composites using waste vegetable oil based resins. Journal of Polymers and the Environment . doi:10.1007/s10924-019-01534-8 (In Press)

Ferri, Carlo (2019) Reflections upon measurement and uncertainty in measurement. In: 18th Online World Conference on Soft Computing in Industrial Applications (WSC18), 1-12 Dec 2014. Published in: Proceedings of the 18th Online World Conference on Soft Computing in Industrial Applications (WSC18), 864 pp. 234-243. ISBN 9783030006105. ISSN 2194-5357. doi:10.1007/978-3-030-00612-9_20

Ferri, Carlo (2019) Uncertainty in measurement. In: Intelligent System and Computing. IntechOpen. (In Press)

Fleming, Joseph, Amietszajew, Tazdin, Charmet, Jérôme, Roberts, Alexander John, Greenwood, David and Bhagat, Rohit (2019) The design and impact of in-situ and operando thermal sensing for smart energy storage. Journal of Energy Storage, 22 . pp. 36-43. doi:10.1016/j.est.2019.01.026

Franciosa, Pasquale, Palit, Arnab, Gerbino, Salvatore and Ceglarek, Darek (2019) A novel hybrid shell element formulation (QUAD+ and TRIA+) : a benchmarking and comparative study. Finite Elements in Analysis and Design, 166 (15). 103319. doi:10.1016/j.finel.2019.103319

Franciosa, Pasquale, Serino, Armando, Botros, Rehab Al and Ceglarek, Darek (2019) Closed-loop gap bridging control for remote laser welding of aluminum components based on first principle energy and mass balance. Journal of Laser Applications, 31 (2). 022416. doi:10.2351/1.5096099

Franciosa, Pasquale, Sun, Tianzhu, Ceglarek, Darek, Gerbino, Salvatore and Lanzotti, Antonio (2019) Multi-wave light technology enabling closed-loop in-process quality control for automotive battery assembly with remote laser welding. In: SPIE Optical Metrology, 2019, Munich, 24-27 Jun 2019. Published in: Proceedings of SPIE - International Society for Optical Engineering, 11059 p. 9. ISSN 0277-786X. doi:10.1117/12.2526075

Gangopadhyay, Briti, Khastgir, Siddartha, Dey, Sumanta, Dasgupta, Pallab, Montana, Giovanni and Jennings, Paul. A. (2019) Identification of test cases for Automated Driving Systems using Bayesian optimization. In: 2019 IEEE Intelligent Transportation Systems Conference (ITSC), Auckland, New Zealand, 27-30 Oct 2019. Published in: 2019 IEEE Intelligent Transportation Systems Conference (ITSC) pp. 1961-1967. ISBN 9781538670255. doi:10.1109/ITSC.2019.8917103

Gao, Xiaolong, Huang, Yao, He, Xiaoxiang, Fan, Xiaojing, Liu, Ying, Xu, Hong, Wu, Daming and Wan, Chaoying (2019) Mechanically enhanced electrical conductivity of polydimethylsiloxane-based composites by a hot embossing process. Polymers, 11 (1). 56. doi:10.3390/polym11010056

Ge, Yangyang, Zhao, Shuo, Ma, Liang, Yan , Tao, Li, Zushu and Yang , Bin (2019) Inclusions control and refining slag optimization for fork flat steel. Metals, 9 (2). 253. doi:10.3390/met9020253

Geitner, Claudia, Biondi , Francesco , Skrypchuk, Lee, Jennings, Paul. A. and Birrell, Stewart A. (2019) The comparison of auditory, tactile, and multimodal warnings for the effective communication of unexpected events during an automated driving scenario. Transportation Research Part F: Psychology and Behaviour, 65 . pp. 23-33. doi:10.1016/j.trf.2019.06.011 (In Press)

Giubileo, Filippo, Grillo, Alessandro, Passacantando, Maurizio, Urban, Francesca, Iemmo, Laura, Luongo, Giuseppe, Pelella, Aniello, Loveridge, Melanie, Lozzi, Luca and Di Bartolomeo, Antonio (2019) Field emission characterization of MoS2 nanoflowers. Nanomaterials, 9 (5). 717. doi:10.3390/nano9050717

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2019) Quality and productivity driven trajectory optimisation for robotic handling of compliant sheet metal parts in multi-press stamping lines. Robotics and Computer-Integrated Manufacturing, 56 . pp. 264-275. doi:10.1016/j.rcim.2018.10.004

Glorieux, Emile, Svensson, Bo, Danielsson, Fredrik and Parthasarathy, Prithwick (2019) Energy model for motion planning of 2D-belt press line tending robots. International Journal of Manufacturing Research . doi:10.1504/IJMR.2020.10023045 (In Press)

Grandjean, Thomas R. B., Groenewald, Jakobus and Marco, James (2019) The experimental evaluation of lithium ion batteries after flash cryogenic freezing. Journal of Energy Storage, 21 . pp. 202-215. doi:10.1016/j.est.2018.11.027

Grandjean, Thomas R. B., Groenewald, Jakobus, McGordon, Andrew and Marco, James (2019) Cycle life of lithium ion batteries after flash cryogenic freezing. Journal of Energy Storage . doi:10.1016/j.est.2019.100804 (In Press)

Grosso, Jasmine, Jhumka, Arshad and Bradbury, Matthew S. (2019) Reliable many-to-many routing in wireless sensor networks using ant colony optimisation. In: European Dependable Computing Conference, Naples, Italy, 17-20 Sep 2019. Published in: 2019 15th European Dependable Computing Conference (EDCC) ISBN 9781728139296. doi:10.1109/EDCC.2019.00030 (In Press)

Guerra, Valentina, Wan, Chaoying, Degirmenci, Volkan, Sloan, Jeremy, Presvytis, Dimitris, Watson, Michael and McNally, Tony (2019) Characterisation of graphite nanoplatelets (GNP) prepared at scale by high-pressure homogenisation. Journal of Materials Chemistry C, 7 (21). pp. 6383-6390. doi:10.1039/C9TC01361J

Gupta, Disha, Muthiah, Aravind, Do, Minh Phuong, Sankar, Gopinathan, Hyde, Timothy I., Copley, Mark, Baikie, Tom, Du, Yonghua, Xi, Shibo, Srinivasan, Madhavi and Dong, ZhiLi (2019) Electronic and geometric structures of rechargeable lithium manganese sulfate Li2Mn(SO4)2 cathode. ACS Omega, 4 (7). pp. 11338-11345. doi:10.1021/acsomega.9b00356

Hadeed, Reem, Godsell, Janet and Day, Steven (2019) Analysing supply chain strategies in healthcare from patient flow perspective : a systematic literature review. In: 26th Annual EurOMA Conference, Helsinki, Finland, 17-19 Jun 2019. Published in: Proceedings of the 26th Annual EurOMA Conference (In Press)

Haindl, Silvia, Kampert, Erik, Sasase, Masato, Hiramatsu, Hidenori and Hosono, Hideo (2019) Low anisotropic upper critical fields in SmO1-xFxFeAs thin films with a layered hybrid structure. Superconductor Science and Technology . doi:10.1088/1361-6668/aafe3d (In Press)

Hassanniakalager, Arman and Newall, Philip (2019) A machine learning perspective on responsible gambling. Behavioural Public Policy . doi:10.1017/bpp.2019.9 (In Press)

Hosseinzadeh, Elham, Marco, James and Jennings, P. A. (Paul A.) (2019) Combined electrical and electrochemical-thermal model of parallel connected large format pouch cells. Journal of Energy Storage, 22 . pp. 194-207. doi:10.1016/j.est.2019.02.004

Huang, Ruijie, Zhong, Lei, Xie, Fengwei, Wei, Liming, Gan, Lanfang, Wang, Xuejiao and Liao, Anping (2019) Purification, characterization and degradation performance of a novel dextranase from Penicillium cyclopium CICC-4022. International Journal of Molecular Sciences, 20 (6). 1360. doi:10.3390/ijms20061360

Hunt, Matthew (2019) Two-dimensional surface waves in magnetohydrodynamics. Journal of Plasma Physics, 85 (4). 905850405. doi:10.1017/S0022377819000497

Jabar, Sharhid, West, Geoffrey D., Shollock, Barbara A. and Siefert, John (2019) Metallurgical risk factors in grade 91 steel. In: Joint EPRI-123HiMAT Conference on Advances in High Temperature Materials, Nagasaki, Japan, 21-25th Oct 2019 (In Press)

Jbair, Mohammad, Ahmad, Bilal, Ahmad, Mus'ab, Vera, Daniel A., Harrison, Robert and Ridler, Tony (2019) Automatic PLC code generation based on virtual engineering model. In: IEEE International Conference on Industrial Cyber-Physical Systems (ICPS 2019), Taipei, Taiwan, 6-9 May 2019 pp. 675-680. ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780213

Ji, Mo, Davis, Claire and Strangwood, Martin (2019) Effect of grain size distribution on recrystallisation kinetics in an Fe-30Ni model alloy. Metals, 9 (3). 369. doi:10.3390/met9030369 (In Press)

Jones, A., Angelopoulou, O. and Noriega, L. (2019) Survey of data remaining on second hand memory cards in the UK. Computers & Security, 84 . pp. 239-243. doi:10.1016/j.cose.2019.03.006

Jones, Richard W. and Despotou, Georgios (2019) Unmanned aerial systems and healthcare : possibilities and challenges. In: 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), Xi'an, China, 19-21 Jun 2019. Published in: 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA) pp. 189-194. ISBN 9781538694916. ISSN 2158-2297. doi:10.1109/ICIEA.2019.8834142

Kamarudin, Muhammad Hilmi, Maple, Carsten and Watson, Tim (2019) Hybrid feature selection technique for intrusion detection system. International Journal of High Performance Computing and Networking (IJHPCN), 13 (2). pp. 232-240. doi:10.1504/IJHPCN.2019.097503

Kaniappan Chinnathai, Malarvizhi, Al-Mowafy, Zeinab, Alkan, Bugra, Vera, Daniel A. and Harrison, Robert (2019) A framework for pilot line scale-up using digital manufacturing. In: 52nd CIRP conference on manufacturing systems, Slovenia, 12-14 Jun 2019. Published in: Procedia CIRP, 81 pp. 962-967. ISSN 2212-8271. doi:10.1016/j.procir.2019.03.235

Kisslinger, Ferdinand, Rienmüller, Dennis, Ott, Christian, Kampert, Erik and Weber, Heiko B. (2019) Fractional quantum conductance plateaus in mosaic-like conductors and their similarities to the fractional quantum hall effect. Annalen der Physik . doi:10.1002/andp.201800188 (In Press)

Kohr, Dominik, Ahmad, Mussawar, Alkan, Bugra, Kaniappan Chinnathai, Malarvizhi, Budde, Lukas, Vera, Daniel, Friedli, Thomas and Harrison, Robert (2019) Proposing a holistic framework for the assessment and management of manufacturing complexity through data-centric and human-centric approaches. In: International Conference on Complexity, Future Information Systems and Risk, Funchal, Madeira, Portugal, 20-21 Mar 2018. Published in: Proceedings of the 3rd International Conference on Complexity, Future Information Systems and Risk - Volume 1: COMPLEXIS, 86-93, 2018, Funchal, Madeira, Portugal, 1 pp. 86-93. ISBN 9789897582974. doi:10.5220/0006692000860093

Koleti, Upender Rao, Zhang, Cheng, Malik, Romeo, Dinh, Quang Truong and Marco, James (2019) The development of optimal charging strategies for lithium-ion batteries to prevent the onset of lithium plating at low ambient temperatures. Journal of Energy Storage, 24 . 100798. doi:10.1016/j.est.2019.100798

Koleti, Upender Rao, Zhang, Cheng, Truong, Dinh Quang, Marco, James, Amietszajew, Tazdin and Malik, Romeo (2019) A new concept to improve the lithium plating detection sensitivity in lithium-ion batteries. International Journal of Smart Grid and Clean Energy, 8 (5). pp. 505-516. doi:10.12720/sgce.8.5.505-516

Kotadia, Hiren R., Franciosa, Pasquale and Ceglarek, Dariusz (2019) Challenges and opportunities in remote laser welding of steel to aluminium. MATEC Web of Conferences, 269 . 02012. doi:10.1051/matecconf/201926902012

Kurup, Sreeni Narayana, Ellingford, Christopher and Wan, Chaoying (2019) Shape memory properties of polyethylene/ethylene vinyl acetate /carbon nanotube composites. Polymer Testing . p. 106227. doi:10.1016/j.polymertesting.2019.106227 (In Press)

Lalau, C. C. and Low, John C. T. (2019) Electrophoretic deposition for Lithium-ion battery electrode manufacture. Batteries and Supercaps, 2 (6). pp. 551-559. doi:10.1002/batt.201900017

(2019) A collaborative platform for management of chronic diseases via guideline-driven individualized care plans. Computational and Structural Biotechnology Journal, 17 . pp. 869-885. doi:10.1016/j.csbj.2019.06.003

Le, Anhtuan and Maple, Carsten (2019) Shadows don’t lie : n-sequence trajectory inspection for misbehaviour detection and classification in VANETs. In: 2019 IEEE 90th Vehicular Technology Conference : VTC2019, Honolulu, Hawaii, 22-25 Sep 2019. Published in: Proceedings of the 2019 IEEE 90th Vehicular Technology Conference: VTC2019 (In Press)

Le, Anhtuan and Maple, Carsten (2019) A simplified approach for dynamic security risk management in connected and autonomous vehicles. In: Living in the Internet of Things (IoT 2019), London, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) ISBN 9781839530890. doi:10.1049/cp.2019.0140

Leeson, Mark S. and Higgins, Matthew D. (2019) Optical wireless and millimeter waves for 5G access networks. In: Kishk, Ahmed, (ed.) The fifth generation (5G) of wireless communication. London: IntechOpen, pp. 5-23. ISBN 9781789857702

Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Crystallization behavior of liquid CaO-SiO2-FeO-MnO slag in relation to its reaction with moisture. Metallurgical and Materials Transactions B . doi:10.1007/s11663-019-01595-z (In Press)

Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Effects of slag composition on H2 generation and magnetic precipitation from molten steelmaking slag-steel reaction. Metallurgical and Materials Transactions B, 50 (2). pp. 1023-1034. doi:10.1007/s11663-019-01533-z

Li, Liuying, Zhang, Cheng, Marco, James and Widanage, Widanalage Dhammika (2019) Control-oriented implementation and model order reduction of a lithium-ion battery electrochemical model. In: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Hanoi, Vietnam, Vietnam, 14-17 Oct 2019. Published in: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC) pp. 1-5. ISBN 9781728112497. ISSN 1938-8756. doi:10.1109/VPPC46532.2019.8952373

Lin, Tzu-Chi , Amamra, Sid Ali and Marco, James (2019) Connected-autonomous electric vehicles based on DC-bus stabilisation using hybrid storage system. In: EVER2019 : Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Grimaldi Forum, Monte Carlo, Monaco, 8-10 May 2019 (In Press)

Liu, Chunlei, Ding, Wenrui, Yang, Jinyu, Murino, Vittorio, Zhang, Baochang, Han, Jungong and Guo, Guodong (2019) Aggregation signature for small object tracking. IEEE Transactions on Image Processing . (In Press)

Liu, Jun, Wilson, John, Davis, Claire and Peyton, A. J. (2019) Magnetic characterisation of grain size and precipitate distribution by major and minor BH loop measurements. Journal of Magnetism and Magnetic Materials, 481 (1). pp. 55-67. doi:10.1016/j.jmmm.2019.02.088

Liu, Peng, Li, Ying, Shang, Xiaoqin and Xie, Fengwei (2019) Starch–zinc complex and its reinforcement effect on starch-based materials. Carbohydrate Polymers, 206 . pp. 528-538. doi:10.1016/j.carbpol.2018.11.034

Liu, Yang, Gao, Xinbo, Gan, Quanxue, Shao, Ling and Han, Jungong (2019) Adaptive robust principal component analysis. Neural Networks . doi:10.1016/j.neunet.2019.07.015 (In Press)

Liu, Yi, Han, Jungong, Zhang, Qiang and Shan, Caifeng (2019) Deep salient object detection with contextual information guidance. IEEE Transactions on Image Processing . doi:10.1109/TIP.2019.2930906 (In Press)

Loveridge, Melanie, Tan, Chaou C., Maddar, Faduma, Guillaume, Remy, Abbott, Mike, Dixon, Shaun, McMahon, Richard A., Curnick, Ollie, Ellis, Mark, Lain, Mike J., Barai, Anup, Amor-Segan, Mark, Bhagat, Rohit and Greenwood, David G. (2019) Temperature considerations for charging Li-ion batteries : inductive vs. mains charging modes for portable electronic devices. ACS Energy Letters, 4 (5). pp. 1086-1091. doi:10.1021/acsenergylett.9b00663

Luo, Hang, Zhou, Xuefan, Ellingford, Christopher, Zhang, Yan, Chen, Sheng, Zhou, Kechao, Zhang, Dou, Bowen, Chris R. and Wan, Chaoying (2019) Interface design for high energy density polymer nanocomposites. Chemical Society Reviews, 48 (16). pp. 4424-4465. doi:10.1039/c9cs00043g

Malas, Asish, Isakov, Dmitry, Couling, Kevin and Gibbons, Gregory John (2019) Fabrication of high permittivity resin composite for vat photopolymerization 3D printing : morphology, thermal, dynamic mechanical and dielectric properties. Materials, 12 (3818). pp. 1-13. doi:10.3390/ma12233818

Malik, Romeo, Loveridge, Melanie, Williams, Luke J., Huang, Qianye, West, Geoffrey D., Shearing, Paul R., Bhagat, Rohit and Walton, Richard I. (2019) Porous metal–organic frameworks for enhanced performance silicon anodes in lithium-ion batteries. Chemistry of Materials, 31 (11). pp. 4156-4165. doi:10.1021/acs.chemmater.9b00933

Mao, Ken, Ramakrishnan, Ramkumar, Greenwood, David G., Goodship, Vannessa, Shrouti, Chetan, Chetwynd, D. G. and Langlois, Paul (2019) The wear resistance improvement of fibre reinforced polymer composite gears. Wear, 426-427 (Part B). pp. 1033-1039. doi:10.1016/j.wear.2018.12.043

Maple, Carsten, Bradbury, Matthew S., Le, Anhtuan and Ghirardello, Kevin (2019) A connected and autonomous vehicle reference architecture for attack surface analysis. Applied Sciences, 9 (23). 5101. doi:10.3390/app9235101

Mathekga, Mmamolatelo E., Ademi, Sul and McMahon, Richard A. (2019) Brushless doubly fed machine magnetic field distribution characteristics and their impact on the analysis and design. IEEE Transactions on Energy Conversion, 34 (4). pp. 2180-2188. doi:10.1109/TEC.2019.2939183

Mathew, James, Remy, Guillaume , Williams, M. A., Tang, Fengzai and Srirangam, Prakash (2019) Effect of Fe intermetallics on microstructure and properties of Al-7Si alloys. JOM . doi:10.1007/s11837-019-03444-5 (In Press)

McCaig, Duncan, Elliott, Mark T., Siew, Cynthia S.Q., Walasek, Lukasz and Meyer, Caroline (2019) Profiling commenters on mental health-related online forums : a methodological example focusing on eating disorder-related commenters. Journal of Medical Internet Research, 6 (4). e12555. doi:10.2196/12555

McTavish, James and Brambley, Edward J. (James) (2019) Nonlinear sound propagation in 2D curved ducts : a multimodal approach. Journal of Fluid Mechanics, 875 . pp. 411-447. doi:10.1017/jfm.2019.497

Mearns, David L., Warnett, Jason M. and Williams, M. A. (2019) An early Portuguese mariner's astrolabe from the Sodré Wreck‐site, Al Hallaniyah, Oman. International Journal of Nautical Archaeology . doi:10.1111/1095-9270.12353

Miao, Yun, Lin, Zijia, Ding, Guiguang and Han, Jungong (2019) Shallow feature based dense attention network for crowd counting. In: https://aaai.org/Conferences/AAAI-20/), New York, New York, 7-12 Feb 2020

Michael, John, Gutoreva, Alina, Lee, Michele H., Tan, Peng Ning, Bruce, Eleanor M., Székely, M., Ankush, Thobhani A, Sakaguchi, Hiroaki, Walasek, Lukasz and Ludvig, E. (2019) Decision-makers use social information to update their preferences—but choose for others as they do for themselves. Journal of Behavioral Decision Making . doi:10.1002/bdm.2163 (In Press)

Moeini, Rana, Weston, Paul, Tricoli, Pietro, Dinh, Truong Quang, McGordon, Andrew and Hughes, Darren J. (2019) Enhancement of reliability in condition monitoring techniques in wind turbines. In: 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, 23-26 Oct 2019. Published in: 23rd International Conference on Mechatronics Technology (ICMT) pp. 1-6. ISBN 9781728139999. doi:10.1109/ICMECT.2019.8932141

Mohammed, Abdul Rehan Khan and Ahmad, Bilal (2019) Literature survey about elements of manufacturing shop floor operation key performance indicators. In: 2019 5th International Conference on Control, Automation and Robotics (ICCAR), Beijing, China, 19-22 Apr 2019. Published in: 2019 5th International Conference on Control, Automation and Robotics (ICCAR) ISBN 9781728133256. ISSN 2251-2446. doi:10.1109/ICCAR.2019.8813436 (In Press)

Morankar, Swapnil, Mandal, Monalisa, Kourra, Nadia, Williams, M. A., Mitra, Rahul and Srirangam, Prakash (2019) X-Ray tomography study on porosity and particle size distribution in In Situ Al-4.5Cu-5TiB2 Semisolid rolled composites. JOM . doi:10.1007/s11837-019-03385-z

Moriceau, Guillaume, Lester, Daniel, Pappas, George S., O’Hora, Paul, Winn, Joby, Smith, Timothy and Perrier, Sébastien (2019) Well-defined alkyl functional poly(styrene-co-maleic anhydride) architectures as pour point and viscosity modifiers for lubricating oil. Energy & Fuels, 33 (8). pp. 7257-7264. doi:10.1021/acs.energyfuels.9b01470

Moriceau, Guillaume, Tanaka, Joji, Lester, Daniel, Pappas, George S., Cook, Alexander B., O’Hora, Paul, Winn, Joby, Smith, Timothy and Perrier, Sébastien (2019) Influence of grafting density and distribution on material properties using well-defined alkyl functional poly(styrene-co-maleic anhydride) architectures synthesized by RAFT. Macromolecules, 52 (4). pp. 1469-1478. doi:10.1021/acs.macromol.8b02231

Mäkiö-Marusik, Elena, Azmat, Freeha, Ahmad, Bilal, Harrison, Robert and Walter, Armando (2019) Evaluation instrument for engineering modules and courses. In: IEEE International Conference on Industrial Informatics, INDIN 2019, Helsinki, Finland, 22-25 Jul 2019. Published in: IEEE International Conference on Industrial Informatics, INDIN 2019 (In Press)

Newall, Philip, Moodie, Crawford, Reith, Gerda, Stead, Martine, Critchlow, Nathan, Morgan, Amber and Dobbie, Fiona (2019) Gambling marketing from 2014 to 2018 : a literature review. Current Addiction Reports . doi:10.1007/s40429-019-00239-1 (In Press)

O'Shea, Brian A., Watson, Derrick G. , Brown, G. D. A. (Gordon D. A.) and Fincher, Corey L. (2019) Infectious disease prevalence, not race exposure, predicts implicit and explicit racial prejudice across the USA. Social Psychological and Personality Science . (In Press)

Oliveira, Luis, Bruen, Claudia, Birrell, Stewart A. and Cain, Rebecca (2019) What passengers really want : assessing the value of rail innovation to improve experiences. Transportation Research Interdisciplinary Perspectives . doi:10.1016/j.trip.2019.100014 (In Press)

Oliveira, Luis, Fox, Catherine, Birrell, Stewart A. and Cain, Rebecca (2019) Analysing passengers’ behaviours when boarding trains to improve rail infrastructure and technology. Robotics and Computer-Integrated Manufacturing, 57 . pp. 282-291. doi:10.1016/j.rcim.2018.12.008

Oliveira, Luis, Mitchell, Val and May, Andrew (2019) Smart home technology—comparing householder expectations at the point of installation with experiences 1 year later. Personal and Ubiquitous Computing . doi:10.1007/s00779-019-01302-4 (In Press)

Oliveira, Luis, Proctor, Karl, Burns, Christopher G. and Birrell, Stewart (2019) Driving style : how should an automated vehicle behave? Information, 10 (6). 219. doi:10.3390/info10060219

Ozden, Mucahit, Ignatius, Joshua, Masi, Donato and Agca, Ahmet Onur (2019) Purchase intention towards remanufactured products : a systematic literature review. In: EurOMA 2019, Helsinki, Finland, 17-19 Jun 2019 (Unpublished)

Ozpolat, Mumin, AlluhaibI, Osama, Kampert, Erik and Higgins, Matthew D. (2019) Connectivity analysis for mmWave V2V networks : exploring critical distance and beam misalignment. In: GLOBECOM 2019, Island of Hawaii, 9-13 Dec 2019. Published in: Connectivity Analysis for mmWave V2V Networks: Exploring Critical Distance and Beam Misalignment (In Press)

Palit, Arnab, King, Richard, Gu, Yolanda, Pierrepont, James, Hart, Zoe, Elliott, Mark T. and Williams, Mark A. (2019) Prediction and visualisation of bony impingement for subject specific total hip arthroplasty. In: 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC 2019) , Berlin, Germany, 23-27 Jul 2019

Palit, Arnab, King, Richard, Gu, Yolanda, Pierrepont, James, Simpson, David and Williams, Mark A. (2019) Subject-specific surgical planning for hip replacement : a novel 2D graphical representation of 3D hip motion and prosthetic impingement information. Annals of Biomedical Engineering . doi:10.1007/s10439-019-02260-x (In Press)

Pang, Yanwei, Cao, Jiale, Wang, Jian and Han, Jungong (2019) JCS-Net : joint classification and super-resolution network for small-scale pedestrian detection in surveillance images. IEEE Transactions on Information Forensics and Security . p. 1. doi:10.1109/TIFS.2019.2916592 (In Press)

Pasco, Corentin, Khan, Muhammad Aurangzeb and Kendall, Kenneth N. (2019) A novel discrete method of shear angle measurement for in-plane shear properties of thermoset prepreg using a point-tracking algorithm. Journal of Composite Materials, 53 (14). pp. 2001-2013. doi:10.1177/0021998318813193

Pastor-Fernandez, Carlos, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Critical review of non-invasive diagnosis techniques for quantification of degradation modes in lithium-ion batteries. Renewable and Sustainable Energy Reviews , 109 . pp. 138-159. doi:10.1016/j.rser.2019.03.060

Pathan, Tanveerkhan S., Rashid, Muhammad, Walker, Marc, Widanage, Widanalage Dhammika and Kendrick, Emma (2019) Active formation of Li-ion batteries and its effect on cycle life. Journal of Physics : Energy . doi:10.1088/2515-7655/ab2e92 (In Press)

Petrie, Owen and Brambley, Edward J. (James) (2019) Nonlinear acoustics in a viscothermal boundary layer over an acoustic lining. AIAA Journal . doi:10.2514/1.J058180 (In Press)

Pickford, Tom, Gu, Xu, Heeley, Ellen L. and Wan, Chaoying (2019) Effects of an ionic liquid and processing conditions on the β-polymorph crystal formation in poly(vinylidene fluoride). CrystEngComm . doi:10.1039/C9CE01051C (In Press)

Poluektov, Mikhail and Figiel, Lukasz (2019) A numerical method for finite-strain mechanochemistry with localised chemical reactions treated using a Nitsche approach. Computational Mechanics, 63 (5). pp. 885-911. doi:10.1007/s00466-018-1628-z

Rashid, Muhammad, Pathan, Tanveerkhan S., McGordon, Andrew, Kendrick, Emma and Widanage, Widanalage Dhammika (2019) Investigation of hysteresis and relaxation behaviour in graphite and LiNi0.33Mn0.33Co0.33O2 electrodes. Journal of Power Sources, 440 . 227153. doi:10.1016/j.jpowsour.2019.227153

Ren, Yaxing, Truong, Dinh Quang, Marco, James and Greenwood, David G. (2019) Torque vectoring based drive assistance system for turning an electric narrow tilting vehicle. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 13 (1). pp. 1-13. doi:10.1177/0959651818823589

Ridge, Alex, Ademi, Sul, McMahon, Richard A. and Kelly, Hugh-Peter (2019) Ferrite-based axial flux permanent magnet generator for wind turbines. Journal of Engineering, 2019 (17). pp. 3942-3946. doi:10.1049/joe.2018.8176

Robbins, Tim, Lim Choi Keung, Sarah Niukyun, Sankaranarayanan, Sailesh, Randeva, Harpal S. and Arvanitis, Theodoros N. (2019) Risk factors for readmission of inpatients with Diabetes : a systematic review. Journal of Diabetes and its Complications, 33 (5). pp. 398-405. doi:10.1016/j.jdiacomp.2019.01.004

Rogall, Martin, Amietszajew, Tazdin, Bhagat, Rohit, Brucoli, Maria and Greenwood, David G. (2019) On the utilisation of the pseudo-capacitive capabilities of Li-ion cells for the provision of frequency response services. Journal of Energy Storage, 22 . pp. 311-317. doi:10.1016/j.est.2019.02.028

Rout, Bapin Kumar, Brooks, G., Rhamdhani, M. A., Li, Zushu and van der Knoop, W. (2019) The behavior of manganese in oxygen steelmaking. In: AISTech 2018 - The Iron & Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018. Published in: 2018 AISTech Conference Proceedings

Saberi, Aref, Zhang, Shuaizhong, van den Bersselaar, Carola, Kandail, Harkamaljot S., den Toonder, Jaap M. J. and Kurniawan, Nicholas A. (2019) A stirring system using suspended magnetically-actuated pillars for controlled cell clustering. Soft Matter, 15 (6). pp. 1435-1443. doi:10.1039/C8SM01957F

Safra, Zvi, Ma, Sinong and Melkonyan, Tigran A. (2019) Is allocation affected by the perception of others' irresponsible behavior and by ambiguity? Risk Analysis, 39 . pp. 2182-2196. doi:10.1111/risa.13319

Santos, Cláudio, Abubakar, Sharbanon, Barros, Ana Cristina, Mendonça, Joana, Dalmarco, Gustavo and Godsell, Janet (2019) Joining global aerospace value networks : lessons for industrial development policies. Space Policy . doi:10.1016/j.spacepol.2019.01.006

Seamer, Paul, Brake, Simon, Moore, Patrick, Mohammed, Mohammed A. and Wyatt, Steven (2019) Did government spending cuts to social care for older people lead to an increase in emergency hospital admissions? An ecological study, England 2005–2016. BMJ Open, 9 (4). e024577. doi:10.1136/bmjopen-2018-024577

SenGupta, A., Santillana, B., Sridhar, S. and Auinger, Michael (2019) Dendrite growth direction measurements : understanding the solute advancement in continuous casting of steel. IOP Conference Series: Materials Science and Engineering, 529 (1). 012065. doi:10.1088/1757-899X/529/1/012065

SenGupta, Arunava, Santillana, Begona, Sridhar, Seetharaman and Auinger, Michael (2019) Transient effect of fluid flow on dendrite growth direction in binary Fe-C alloys using Phase-Field in OpenFOAM. JOM Journal of The Minerals, Metals & Materials Society, 71 (11). pp. 3876-3884. doi:10.1007/s11837-019-03730-2

Shaikh, Usama F., Das, Abhishek, Barai, Anup and Masters, Iain (2019) Electro-thermo-mechanical behaviours of laser joints for electric vehicle battery interconnects. In: 2019 Electric Vehicles International Conference (EV), Bucharest, Romania, 3-4 Oct 2019. Published in: Proceedings of 2019 Electric Vehicles International Conference (EV) (In Press)

Shang, Xiaoqin, Jiang, Huihua, Wang, Qingling, Liu, Peng and Xie, Fengwei (2019) Cellulose-starch hybrid films plasticized by aqueous ZnCl2 solution. International Journal of Molecular Sciences, 20 (3). 474. doi:10.3390/ijms20030474

Shaw-Stewart, James, Alvarez-Reguera, Anna, Greszta, Agata, Marco, James, Masood, Maryam, Sommerville, Rob and Kendrick, Emma (2019) Aqueous solution discharge of cylindrical lithium-ion cells. Sustainable Materials and Technologies . e00110. doi:10.1016/j.susmat.2019.e00110 (In Press)

Shen, Jialong, Zhou, Lei, Jacobs, Will, Hunt, Peter and Davis, Claire (2019) Real-time in-line steel microstructure control through magnetic properties using an EM sensor. Journal of Magnetism and Magnetic Materials, 490 . 165504. doi:10.1016/j.jmmm.2019.165504

Shen, Jialong, Zhou, Lei, Rowshandel, H., Nicholson, G. L. and Davis, Claire (2019) Prediction of RCF clustered cracks dimensions using an ACFM sensor and influence of crack length and vertical angle. Nondestructive Testing and Evaluation . pp. 1-18. doi:10.1080/10589759.2019.1611817 (In Press)

Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514 (In Press)

Sinha, Sumit, Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Dariusz (2019) 3D convolutional neural networks to estimate assembly process parameters using 3D point-clouds. In: SPIE Optical Metrology, Munich, Germany, 24-27 Jun 2019. Published in: Proceedings of SPIE : Multimodal Sensing: Technologies and Applications, 11059 p. 10. ISSN 0277-786X. doi:10.1117/12.2526062

Slater, Carl, Hechu, Kateryna, Davis, Claire and Sridhar, Seetharaman (2019) Characterisation of the solidification of a molten steel surface using infrared thermography. Metals, 9 (2). 126. doi:10.3390/met9020126

Slater, Carl, Mandal, Abhijit and Davis, Claire (2019) The influence of segregation of Mn on the recrystallization behavior of C-Mn steels. Metallurgical and Materials Transactions B . doi:10.1007/s11663-019-01603-2 (In Press)

Small, Neil and Hazra, S. K. (2019) Data for Digital image correlation of Marciniak tests for AA6111-T4 (1.2mm). [Dataset]

Suma, Rossella, Debattista, Kurt, Watson, Derrick G., Blagrove, Elisabeth and Chalmers, Alan (2019) Subjective evaluation of high dynamic range imaging for face matching. IEEE Transactions on Emerging Topics in Computing . doi:10.1109/TETC.2019.2958738 (In Press)

Suppatvech, Chutikarn, Godsell, Janet and Day, Steven (2019) The roles of internet of things technology in enabling servitized business models : a systematic literature review. Industrial Marketing Management . doi:10.1016/j.indmarman.2019.02.016 (In Press)

Tan, Xiaoyan, Chen, Ling, Li, Xiaoxi and Xie, Fengwei (2019) Effect of anti-solvents on the characteristics of regenerated cellulose from 1-ethyl-3-methylimidazolium acetate ionic liquid. International Journal of Biological Macromolecules, 124 . pp. 314-320. doi:10.1016/j.ijbiomac.2018.11.138

Tang, Xiaopeng, Liu, Kailong, Wang, Xin, Liu, Boyang, Gao, Furong and Widanage, Widanalage Dhammika (2019) Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries. Journal of Power Sources, 440 . 227118. doi:10.1016/j.jpowsour.2019.227118

Tao, Binglin, Yule, Lewis C., Daviddi, Enrico, Bentley, Cameron Luke and Unwin, Patrick R. (2019) Correlative electrochemical microscopy of Li-Ion (De)intercalation at a series of individual LiMn2 O4 particles. Angewandte Chemie International Edition, 58 (14). pp. 4606-4611. doi:10.1002/anie.201814505

Taylor, James, Barai, Anup, Rajan, Ashwin T., Guo, Yue, Amor-Segan, Mark and Marco, James (2019) An insight into the errors and uncertainty of the lithium-ion battery characterisation experiments. Journal of Energy Storage, 40 . 100761. doi:10.1016/j.est.2019.100761

Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Comparison of formability and microstructural evolution of C106 copper and 316L stainless steel. JOM . doi:10.1007/s11837-019-03603-8 (In Press)

Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Direct observation via in situ heated stage EBSD analysis of recrystallization of phosphorous deoxidised copper in unstrained and strained conditions. Metals and Materials International . doi:10.1007/s12540-019-00493-y (In Press)

Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Influence of elevated temperatures on mechanical properties and microstructure of C106 Copper investigated by in-situ heated stage EBSD analysis. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-019-05374-y (In Press)

Tejpal, Shilpa, Sanghera, Narinder, Manoharan, Vijayalaxmi, Planas-Iglesias, Joan, Myler, Kate and Klein-Seetharaman, Judith (2019) Towards personalised molecular feedback for weight loss. BMC Obesity, 6 (1). 20. doi:10.1186/s40608-019-0237-5

Titmarsh, Rohin and Harrison, Robert (2019) Automated leak testing for cylindrical cell automotive battery modules : enabling data visibility using industry 4.0. In: ICMT 2019, Salerno, Italy, 23-26 Oct 2019. Published in: 2019 23rd International Conference on Mechatronics Technology (ICMT) ISBN 9781728139982. doi:10.1109/ICMECT.2019.8932152

Traore, Lamine, Assele-Kama, Ariane, Lim Choi Keung, Sarah Niukyun, Karni, Liran, Klein, Gunnar O., Lilja, Mikael, Scandurra, Isabella, Verdoy, Dolores, Yuksel, Mustafa, Arvanitis, Theodoros N., Tsopra, Rosy and Jaulent, Marie-Christine (2019) User-centered design of the C3-cloud platform for elderly with multiple diseases - functional requirements and application testing. In: MEDINFO 2019: Health and Wellbeing e-Networks for All : Proceedings of the 17th World Congress on Medical and Health Informatics. Studies in Health Technology and Informatics, 264 . IOS Press, pp. 843-847. ISBN 9781643680026

Urasinska-Wojcik, Barbara, Chilton, Neil, Todd, Peter M., Elsworthy, Christopher, Bates, Myles, Roberts, Gethin and Gibbons, Gregory John (2019) Integrated manufacture of polymer and conductive tracks for real-world applications. Additive Manufacturing, 29 . 100777. doi:10.1016/j.addma.2019.06.028

Vitolo, F., Franciosa, Pasquale, Ceglarek, Darek, Pantalano, S. and De Martino, M. (2019) A generalised multi-attribute task sequencing approach for robotics optical inspection systems. In: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), Naples, Italy, 4-6 Jun 2019. Published in: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT) ISBN 9781728104300. doi:10.1109/METROI4.2019.8792869

Wakenshaw, Susan Y. L. and Dhamotharan, Lalitha (2019) The digital person - the state of the art and science : a white paper from the 2nd Wolfson - HAT international symposium on the digital person. HAT Community Foundation.

Walshe, Marcus, Epiphaniou, Gregory, Al-Khateeb, Haider, Hammoudeh, Mohammad, Katos, Vasilios and Dehghantanha, Ali (2019) Non-interactive zero knowledge proofs for the authentication of IoT devices in reduced connectivity environments. Ad Hoc Networks, 95 . 101988. doi:10.1016/j.adhoc.2019.101988 (In Press)

Wang, Fei, Davis, Claire and Strangwood, Martin (2019) Grain growth on reheating for an as-cast Al-Nb-containing steel with segregated composition. Materials Science and Technology, 35 (5). pp. 615-627. doi:10.1080/02670836.2019.1577533

Wang, Jianguo and McMahon, Richard A. (2019) Reliable control of direct PWM AC-AC buck converter with short circuit protection. In: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 12-14 Jun 2019. Published in: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE) pp. 950-954. ISBN 9781728136660. ISSN 2163-5145. doi:10.1109/ISIE.2019.8781419

Watson, Gregory A., Steadman, Liam, Purser, David, Kirk, Richard, Kenny, Melissa and Bradbury, Matthew S. (2019) Organising a multidisciplinary postgraduate colloquium. Exchanges: The Interdisciplinary Research Journal, 6 (2). pp. 86-101. doi:10.31273/eirj.v6i2.348

White, Hannah J., Haycraft, Emma and Meyer, Caroline (2019) Family mealtime negativity and adolescent binge-eating : a replication and extension study in a community sample. Eating Behaviors, 34 . 101306. doi:10.1016/j.eatbeh.2019.101306

Whitty, Monica T. (2019) Predicting susceptibility to cyber-fraud victimhood. Journal of Financial Crime . doi:10.1108/JFC-10-2017-0095 (In Press)

Whitty, Monica T. (2019) Who can spot an online romance scam? Journal of Financial Crime . doi:10.1108/JFC-06-2018-0053 (In Press)

Whulanza, Yudan, Hakim, Taufik Ariesta, Utomo, Muhammad S., Fadhilah, Shabrina, Charmet, Jérôme, Irwansyah, Ridho, Warjito, and Kiswanto, Gandjar (2019) Design and evaluation of pneumatic micropump module for a portable polymerase chain reaction kit. In: The 10th International Meeting of advances in thermofluids (IMAT 2018): Smart City: Advances in Thermofluid Technology in Tropical Urban Development, Bali, Indonesia, 16–17 Nov 2018. Published in: AIP Conference Proceedings, 2062 (1). ISBN 978-0-7354-1790-8. ISSN 0094-243X. doi:10.1063/1.5086596

Woodman, Roger, Hill, William D., Birrell, Stewart A. and Higgins, Matthew D. (2019) An evolutionary approach to the optimisation of autonomous pod distribution for application in an urban transportation service. In: 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, 23-26 Oct 2019. Published in: 2019 23rd International Conference on Mechatronics Technology (ICMT) pp. 1-6. ISBN 9781728139982. doi:10.1109/ICMECT.2019.8932138

Woodman, Roger, Lu, Ke, Higgins, Matthew D., Brewerton, Simon, Jennings, Paul A. and Birrell, Stewart A. (2019) Gap acceptance study of pedestrians crossing between platooning autonomous vehicles in a virtual environment. Transportation Research Part F: Traffic Psychology and Behaviour, 67 . pp. 1-14. doi:10.1016/j.trf.2019.09.017

Woodman, Roger, Lu, Ke, Higgins, Matthew D., Brewerton, Simon, Jennings, Paul. A. and Birrell, Stewart A. (2019) A human factors approach to defining requirements for low-speed autonomous vehicles to enable intelligent platooning. In: 2019 IEEE Intelligent Vehicles Symposium (IV), 9-12 Jun 2019, Paris, France pp. 2371-2376. ISSN 2642-7214. doi:10.1109/IVS.2019.8814128

Worwood, Daniel, Marco, James, Hosseinzadeh, Elham, Kellner, Quirin, McGlen, Ryan, Mullen, D., Lynn, L. and Greenwood, David G. (2019) Experimental analysis of a novel cooling material for large format automotive lithium-ion cells. Energies, 12 (7). pp. 1-32. 1251. doi:10.3390/en12071251

Wu, Wenjing, Zhou, Yutao, Li, Jie and Wan, Chaoying (2019) Shape memory and self‐healing behavior of styrene–butadiene–styrene/ethylene‐methacrylic acid copolymer (SBS/EMAA) elastomers containing ionic interactions. Journal of Applied Polymer Science . 48666. doi:10.1002/app.48666 (In Press)

Xie, Fengwei, Zhang, Tianlong, Bryant, Peter, Kurusingal, Valsala, Colwell, John M. and Laycock, Bronwyn (2019) Degradation and stabilization of polyurethane elastomers. Progress in Polymer Science, 90 . pp. 211-268. doi:10.1016/j.progpolymsci.2018.12.003

Xu, Jinchuan, Tan, Xiaoyan, Chen, Ling, Li, Xiaoxi and Xie, Fengwei (2019) Starch/microcrystalline cellulose hybrid gels as gastric-floating drug delivery systems. Carbohydrate Polymers, 215 . pp. 151-159. doi:10.1016/j.carbpol.2019.03.078

Xu, Renze, Zhang, Jianliang, Li, Zushu and Zhao, Yongan (2019) Corrosion behavior of alumina containing refractory in blast furnace hearth by CaO-SiO2-MgO-Al2O3-Cr2O3 system slags. ISIJ International . doi:10.2355/isijinternational.ISIJINT-2019-149 (In Press)

Yang, H., Van Den Berg, F. D., Bos, C., Luinenburg, A., Mosk, J., Hunt, P., Dolby, M., Hinton, J., Peyton, A. J. and Davis, Claire (2019) Em sensor array system and performance evaluation for in-line measurement of phase transformation in steel. Insight - Non-Destructive Testing and Condition Monitoring, 61 (3). pp. 153-157. doi:10.1784/insi.2019.61.3.153

Yang, Shanshan and Evans, Chris (2019) Opportunities and challenges in using AI Chatbots in Higher Education. In: The 3rd International Conference on Education and E-Learning (ICEEL 2019), Barcelona, Spain, 5-7 Nov 2019. Published in: Proceedings of the 2019 3rd International Conference on Education and E-Learning pp. 79-83. ISBN 9781450372251. doi:10.1145/3371647.3371659

Yeo, Zhiquan, Choong Low, Jonathan Sze, Loong Tan, Daren Zong, Chung, Si Ying, Tjandra, Tobias Bestari and Ignatius, Joshua (2019) A collaboration platform for enabling industrial symbiosis : towards creating a self-learning waste-to-resource database for recommending industrial symbiosis transactions using text analytics. In: 26th CIRP Conference on Life Cycle Engineering, Purdue University, West Lafayette, IN, May 7-9 2019. Published in: Procedia CIRP, 80 pp. 643-648. ISSN 2212-8271. doi:10.1016/j.procir.2019.01.015

Yeo, Zhiquan, Masi, Donato, Sze Choong Low, Jonathan, Ng, Yen Ting, Siew Tan, Puay and Barnes, Stuart (2019) Tools for promoting industrial symbiosis : a systematic review. Journal of Industrial Ecology, 23 (5). pp. 1087-1108. doi:10.1111.jiec.12846

Yuan, Hu, Bradbury, Matthew S., Maple, Carsten and Gu, Chen (2019) Throughput aware authentication prioritisation for vehicular communication networks. In: 2019 IEEE 90th Vehicular Technology Conference : VTC2019-Fall , Honolulu, Hawaii, 22–25 Sep 2019. Published in: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall) pp. 1-5. ISBN 9781728112206. doi:10.1109/VTCFall.2019.8891375 (In Press)

Yuan, Hu, Maple, Carsten, Lu, Yi and Watson, Tim (2019) Peer-assisted location authentication and access control for wireless networks. Internet Technology Letters . e71. doi:10.1002/itl2.71

Yule, Lewis C., Bentley, Cameron Luke, West, Geoffrey D., Shollock, Barbara A. and Unwin, Patrick R. (2019) Scanning electrochemical cell microscopy : a versatile method for highly localised corrosion related measurements on metal surfaces. Electrochimica Acta, 298 . pp. 80-88. doi:10.1016/j.electacta.2018.12.054

Yule, Lewis C., Shkirskiy, Viacheslav, Aarons, Jolyon, West, Geoffrey D., Bentley, Cameron Luke, Shollock, Barbara A. and Unwin, Patrick R. (2019) Nanoscale active sites for the hydrogen evolution reaction on low carbon steel. The Journal of Physical Chemistry C . doi:10.1021/acs.jpcc.9b07216 (In Press)

Zabihi, Nima, Logan, Tom, Ademi, Sul and McMahon, Richard A. (2019) Performance of SiC power electronics devices in DC-DC boost synchronous converters for EV applications. In: Domestic Use of Energy Conference, Cape Town, South Africa, 25-27 Mar 2019

Zafeiriadis, Alexandros and Agca, Ahmet Onur (2019) An approach for identifying collaborative business opportunities for networked organizations : application to connected and autonomous vehicles. In: 26th EurOMA Conference, Helsinki, Finland, 17-19 Jun 2019 (Unpublished)

Zhang, Baochang, Yang, Wankou, Wang, Ze, Zhuo, Lian, Zhen, Xiantong and Han, Jungong (2019) The structure transfer machine theory and applications. IEEE Transactions on Image Processing . (In Press)

Zhang, Binjia, Gilbert, Elliot P., Qiao, Dongling, Xie, Fengwei, Wang, David K., Zhao, Siming and Jiang, Fatang (2019) A further study on supramolecular structure changes of waxy maize starch subjected to alkaline treatment by extended-q small-angle neutron scattering. Food Hydrocolloids, 95 . pp. 133-142. doi:10.1016/j.foodhyd.2019.04.031

Zhang, Qiang, Huang, Nianchang, Yao, Lin, Zhang, Dingwen, Shan, Caifeng and Han, Jungong (2019) RGB-T salient object detection via fusing multi-level CNN features. IEEE Transactions on Image Processing . p. 1. doi:10.1109/TIP.2019.2959253 (In Press)

Zhang, Yan, Ellingford, Christopher, Zhang, Runan, Roscow, James, Hopkins, Margaret, Keogh, Patrick, McNally, Tony, Bowen, Chris and Wan, Chaoying (2019) Electrical and mechanical self-healing in high-performance dielectric elastomer actuator materials. Advanced Functional Materials, 29 (15). 1808431. doi:10.1002/adfm.201808431

Zhou, Lei, Hall, Russell and Davis, Claire (2019) Measured and modelled low field relative permeability for dual phase steels at high temperature. Journal of Magnetism and Magnetic Materials, 475 . pp. 38-43. doi:10.1016/j.jmmm.2018.11.096