The Library
Items where Department is "Faculty of Science, Engineering and Medicine > Engineering > WMG (Formerly the Warwick Manufacturing Group)"
Up a level |
Jump to: Journal Article | Book Item | Conference Item | Journal Item | Submitted Journal Article | Report | Image | Dataset
Number of items: 235.
Journal Article
Adegoke, Elijah I., Zidane, Jasmine, Kampert, Erik, Ford, Col R., Birrell, Stewart A. and Higgins, Matthew D. (2019) Infrastructure Wi-Fi for connected autonomous vehicle positioning : a review of the state-of-the-art. Vehicular Communications, 20 . 100185. doi:10.1016/j.vehcom.2019.100185 ISSN 2214-2096.
Aghadavoudi-Jolfaei, M., Shen, Jialong, Smith, A., Zhou, Lei and Davis, Claire (2019) Non-destructive measurement of microstructure and tensile strength in varying thickness commercial DP steel strip using an EM sensor. Journal of Magnetism and Magnetic Materials, 473 . pp. 477-483. doi:10.1016/j.jmmm.2018.10.099 ISSN 0304-8853.
Aljarrah, Omar, Maple, Carsten, Dianati, Mehrdad, Oxtoby, David and Mouzakitis, Alexandros (2019) Intrusion detection systems for intra-vehicle networks : a review. IEEE Access, 7 (1). pp. 21266-21289. doi:10.1109/ACCESS.2019.2894183 ISSN 2169-3536.
Alkan, Bugra (2019) An experimental investigation on the relationship between perceived assembly complexity and product design complexity. International Journal of Interactive Design and Manufacturing, 13 (3). pp. 1145-1157. doi:10.1007/s12008-019-00556-9 ISSN 1955-2513.
Alkan, Bugra and Harrison, Robert (2019) A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53 . pp. 18-31. doi:10.1016/j.jmsy.2019.09.001 ISSN 0278-6125.
Allen, B., Pelham, T., Wu, Y., Drysdale, T., Isakov, Dmitry, Gamlath, C., Stevens, C., Hilton, G., Grant, P. S. and Beach, M. A. (2019) Experimental evaluation of 3D printed spiral phase plates for enabling an orbital angular momentum multiplexed radio system. Royal Society Open Science, 6 (12). pp. 1-14. doi:10.1098/rsos.191419 ISSN 2054-5703.
Allen, Frances M., Cain, Rebecca and Meyer, Caroline (2019) How people with dementia and their carers adapt their homes. A qualitative study. Dementia, 18 (3). pp. 1199-1215. doi:10.1177/1471301217712294 ISSN 1471-3012.
Alluhaibi, Osama, Kampert, Erik, Jennings, Paul. A. and Higgins, Matthew D. (2019) Impact of overlapped AoAs on the achievable uplink rate of hybrid beamforming for massive MIMO mm-Wave Systems for industrial environments. IEEE Access, 7 . pp. 101178-101194. doi:10.1109/ACCESS.2019.2930746 ISSN 2169-3536.
Amamra, Sid-Ali and Marco, James (2019) Vehicle-to-grid aggregator to support power grid and reduce electric vehicle charging cost. IEEE Access, 7 . 178528 -178538. doi:10.1109/ACCESS.2019.2958664 ISSN 2169-3536.
Aqra, Iyad, Abdul Ghani, Norjihan, Maple, Carsten, Machado, JosΓ© and Sohrabi Safa, Nader (2019) Incremental algorithm for association rule mining under dynamic threshold. Applied Sciences, 9 (24). 5398. doi:10.3390/app9245398 ISSN 2076-3417.
Arnold, Eduardo, Al-Jarrah, Omar Y., Dianati, Mehrdad, Fallah, Saber, Oxtoby, David and Mouzakitis, Alexandros (2019) A survey on 3D object detection methods for autonomous driving applications. IEEE Transactions on Intelligent Transportation Systems, 20 (10). pp. 3782-3795. doi:10.1109/TITS.2019.2892405 ISSN 1524-9050.
Awasthi, Shalini and Nair, Nisanth N. (2019) Exploring high-dimensional free energy landscapes of chemical reactions. Wiley Interdisciplinary Reviews : Computational Molecular Science, 9 (3). e1398. doi:10.1002/wcms.1398 ISSN 1759-0876.
Babu, Manoj, Franciosa, Pasquale and Ceglarek, Dariusz (2019) Spatio-temporal adaptive sampling for effective coverage measurement planning during quality inspection of free form surfaces using robotic 3D optical scanner. Journal of Manufacturing Systems, 53 . pp. 93-108. doi:10.1016/j.jmsy.2019.08.003 ISSN 0278-6125.
Baier, Waltraud, Mangham, Chas, Warnett, Jason M., Payne, Mark, Painter, Michelle and Williams, M. A. (2019) Using histology to evaluate micro-CT findings of trauma in three post-mortem samples β First steps towards method validation. Forensic Science International, 297 . pp. 27-34. doi:10.1016/j.forsciint.2019.01.027
Bandi, Bharath, van Krevel, Joost, Aslam, Numan and Srirangam, Prakash (2019) A model and experimental validation to predict heating rates for overlap between ferrite recrystallization and austenite transformation in dual phase steel manufacture. JOM, 71 (4). pp. 1386-1395. doi:10.1007/s11837-019-03358-2 ISSN 1047-4838.
Barai, Anup, Uddin, Kotub, Dubarry, Matthieu, Somerville, Limhi, McGordon, Andrew, Jennings, P. A. (Paul A.) and Bloom, Ira (2019) A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells. Progress in Energy and Combustion Science, 72 . pp. 1-31. doi:10.1016/j.pecs.2019.01.001 ISSN 0360-1285.
Bezzina, Louise, Touyz, Stephen, Young, Sarah, Foroughi, Nasim, Clemes, Stacy, Meyer, Caroline, Arcelus, Jon, Madden, Sloane, Attia, Evelyn, Pike, Kathleen M. and Hay, Phillipa (2019) Accuracy of self-reported physical activity in patients with anorexia nervosa : links with clinical features. Journal of Eating Disorders, 7 (1). 28. doi:10.1186/s40337-019-0258-y ISSN 2050-2974.
Bhalodiya, Jayendra Maganbhai, Palit, Arnab, Ferrante, Enzo, Tiwari, Manoj K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, Mark A. (2019) Hierarchical template matching for 3D myocardial tracking and cardiac strain estimation. Scientific Reports, 9 . 12450. doi:10.1038/s41598-019-48927-2 ISSN 2045-2322.
Bugeja, Keith, Debattista, Kurt and Spina, Sandro (2019) An asynchronous method for cloud-based rendering. The Visual Computer, 35 . pp. 1827-1840. doi:10.1007/s00371-018-1577-8 ISSN 0178-2789.
Cao, Jiale, Pang, Yanwei, Han, Jungong, Gao, Bolin and Li, Xuelong (2019) Taking a look at small-scale pedestrians and occluded pedestrians. IEEE Transactions on Image Processing, 29 . pp. 3143-3152. doi:10.1109/TIP.2019.2957927 ISSN 1057-7149.
Cassinath, Z., Li, Zushu, Sridhar, Seetharaman, Das, A. and Kotadia, Hiren (2019) Microstructural modification of SnβBi and SnβBiβAl immiscible alloys by shearing. Materials Science and Technology, 35 (18). pp. 2157-2164. doi:10.1080/02670836.2019.1661659 ISSN 0267-0836.
Chagas, Luciana Gomes, Jeong, Sangsik, Hasa, Ivana and Passerini, Stefano (2019) Ionic liquid-based electrolytes for sodium-ion batteries : tuning properties to enhance the electrochemical performance of manganese-based layered oxide cathode. ACS Applied Materials & Interfaces, 11 (25). pp. 22278-22289. doi:10.1021/acsami.9b03813 ISSN 1944-8244.
Chakuu, Sumeer, Masi, Donato and Godsell, Janet (2019) Exploring the relationship between mechanisms, actors and instruments in supply chain finance : a systematic literature review. International Journal of Production Economics, 216 . pp. 35-53. doi:10.1016/j.ijpe.2019.04.013 ISSN 0925-5273.
Chen, Fei, Xie, Fengwei, Liu, Peng and Chen, Pei (2019) Structure, thermal stability and suspension rheological properties of alcohol-alkali-treated waxy rice starch. International Journal of Biological Macromolecules, 134 . pp. 397-404. doi:10.1016/j.ijbiomac.2019.05.009 ISSN 0141-8130.
Chen, Huan, Xie, Fengwei, Chen, Ling and Zheng, Bo (2019) Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors. Journal of Food Engineering, 244 . pp. 150-158. doi:10.1016/j.jfoodeng.2018.09.011 ISSN 0260-8774.
Cheng, Chuan, Drummond, Ross, Duncan, Stephen R. and Grant, Patrick S. (2019) Micro-scale graded electrodes for improved dynamic and cycling performance of Li-ion batteries. Journal of Power Sources, 413 . pp. 59-67. doi:10.1016/j.jpowsour.2018.12.021 ISSN 0378-7753.
Chi, Chengdeng, Li, Xiaoxi, Zhang, Yiping, Chen, Ling, Xie, Fengwei, Li, Lin and Bai, Guanghui (2019) Modulating in vitro digestibility and predicted glycemic index of rice starch gels by complexation with gallic acid. Food Hydrocolloids, 89 . pp. 821-828. doi:10.1016/j.foodhyd.2018.11.016 ISSN 0268-005X.
Chin, Seow J., Doherty, Matthew, Vempati, Sesha, Dawson, Paul, Byrne, Cormac, Meenan, Brian J., Guerra, Valentina and McNally, Tony (2019) Solvothermal synthesis of graphene oxide and its composites with poly(Ξ΅-caprolactone). Nanoscale, 11 (40). pp. 18672-18682. doi:10.1039/C9NR04202D ISSN 2040-3364.
Chiu, Y-C., Chen, K-W., SchΓΆnemann, R., Quito, V. L., Sur, S., Zhou, Q., Graf, D., Kampert, Erik, FΓΆrster, T., Yang, K., McCandless, G. T., Chan, Julia Y., Baumbach, R. E., Johannes, M. D. and Balicas, L. (2019) Origin of the butterfly magnetoresistance in a Dirac nodal-line system. Physical Review B, 100 (12). 125112. doi:10.1103/PhysRevB.100.125112 ISSN 2469-9950.
Clohessy, Sophie, Walasek, Lukasz and Meyer, Caroline (2019) Factors influencing employeesβ eating behaviours in the office-based workplace : a systematic review. Obesity Reviews, 20 (12). pp. 1771-1780. doi:10.1111/obr.12920 ISSN 1467-7881.
D'Souza, N., Li, W., Argyrakis, C., West, Geoffrey D. and Slater, Carl (2019) On the evolution of primary gamma prime precipitates during high temperature and high strain rate deformation and subsequent heat treatment in the Ni-based superalloy, RR1000. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50 . pp. 4205-4222. doi:10.1007/s11661-019-05330-w ISSN 1073-5623.
Dancer, Claire E. J., Spawton, J. N. F., Falco, S., Petrinic, N. and Todd, R. I. (2019) Characterisation of damage mechanisms in oxide ceramics indented at dynamic and quasi-static strain rates. Journal of the European Ceramic Society, 39 (15). pp. 4936-4945. doi:10.1016/j.jeurceramsoc.2019.06.054 ISSN 0955-2219.
Dar, Bilal Khalid, Shah, Munam Ali, Islam, Saif Ul, Maple, Carsten, Mussadiq, Shafaq and Khan, Suleman (2019) Delay-aware accident detection and response system using fog computing. IEEE Access, 7 . pp. 70975-70985. doi:10.1109/ACCESS.2019.2910862 ISSN 2169-3536.
Das, Abhishek, Barai, Anup, Masters, Iain and Williams, D. K. (2019) Comparison of tab-to-busbar ultrasonic joints for electric vehicle li-ion battery applications. World Electric Vehicle Journal, 10 (3). 55. doi:10.3390/wevj10030055 ISSN 2032-6653.
Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, D. K. (2019) Evaluation of key geometrical and mechanical properties for remote laser welded AC-170PX aluminium joints. Journal of Laser Micro/Nanoengineering, 14 (1). doi:10.2961/jlmn.2019.01.0001 ISSN 1880-0688.
Das, Abhishek, Li, Dezhi, Williams, D. K. and Greenwood, David G. (2019) Weldability and shear strength feasibility study for automotive electric vehicle battery tab interconnects. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (1). 54. doi:10.1007/s40430-018-1542-5 ISSN 1678-5878.
Das, Abhishek, Masters, Iain and Williams, D. K. (2019) Process robustness and strength analysis of multi-layered dissimilar joints using ultrasonic metal welding. The International Journal of Advanced Manufacturing Technology, 101 . pp. 881-900. doi:10.1007/s00170-018-2936-3 ISSN 0268-3768.
Das, Abhishek, Rajan, Ashwin T. and Barai, Anup (2019) Modelling and characterisation of ultrasonic joints for Li-ion batteries to evaluate the impact on electrical resistance and temperature raise. Journal of Energy Storage, 22 . pp. 239-248. doi:10.1016/j.est.2019.02.017 ISSN 2352-152X.
De Giovanni, Mario, Kaduk, James and Srirangam, Prakash (2019) Modification of Al-Si alloys by Ce or Ce with Sr. JOM, 71 (1). pp. 426-434. doi:10.1007/s11837-018-3192-6 ISSN 1047-4838.
Derlyatka, Anton , Fomenko, Oleg , Eck, Felicia, Khmelev, Egor and Elliott, Mark T. (2019) Bright spots, physical activity investments that work : sweatcoin : a steps generated virtual currency for sustained physical activity behaviour change. British Journal of Sports Medicine . doi:10.1136/bjsports-2018-099739 ISSN 0306-3674.
Dias, F. T., Vieira, V. N., Oliveira, C. P., Silva, D. L., Mesquita, F., Lima, J. R., Wolff-Fabris, F., Kampert, Erik and Pureur, P. (2019) Gaussian and critical scalings in the magnetoconductivity fluctuations of Y3Ba5Cu8O18 superconductor. International Journal of Modern Physics B, 32 (32). 1850360. doi:10.1142/S0217979218503605 ISSN 0217-9792.
Dinda, Soumitra Kumar, kar, Jyotirmaya, Jana, Subhodeep, Gopal Roy, Gour and Srirangam, Prakash (2019) Effect of beam oscillation on porosity and intermetallics of electron beam welded DP600-steel to Al 5754-alloy. Journal of Materials Processing Technology, 265 . pp. 191-200. doi:10.1016/j.jmatprotec.2018.10.026 ISSN 0924-0136.
Dubarry, Matthieu, Baure, George, Pastor-Fernandez, Carlos, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Battery energy storage system modeling : a combined comprehensive approach. Journal of Energy Storage, 21 . pp. 172-185. doi:10.1016/j.est.2018.11.012 ISSN 2352-152X.
Dubarry, Matthieu, Pastor-FernΓ‘ndez, Carlos, Baure, George, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Battery energy storage system modeling : investigation of intrinsic cell-to-cell variations. Journal of Energy Storage, 23 . pp. 19-28. doi:10.1016/j.est.2019.02.016 ISSN 2352-152X.
Echaniz, Rosa G., Paul, Shiladitya and Thornton, Rob (2019) Effect of seawater constituents on the performance of thermal spray aluminum in marine environments. Materials and Corrosion, 70 (6). pp. 996-1004. doi:10.1002/maco.201810764 ISSN 0947-5117.
El-Zehairy, A. A., Nezhad, M. Mousavi, Joekar-Niasar, V., Guymer, I., Kourra, N. and Williams, M. A. (2019) Pore-network modelling of non-Darcy flow through heterogeneous porous media. Advances in Water Resources, 131 . 103378. doi:10.1016/j.advwatres.2019.103378 ISSN 0309-1708.
Elliott, Mark T., Eck, Felicia, Khmelev, Egor, Derlyatka, Anton and Fomenko, Oleg (2019) Physical activity behaviour change driven from engagement with an incentive-based app : evaluating the impact of Sweatcoin. JMIR mHealth and uHealth, 7 (7). e12445 . doi:10.2196/12445 ISSN 2291-5222.
Faraji Niri, Mona, Asadzadeh, Vahid and Rahmani Fard, Javad (2019) Stabilization of arbitrary switched nonlinear fractional order dynamical systems : application to Francis Hydro-Turbine Governing System. Information Technology and Control, 48 (3). pp. 401-414. 20470. doi:10.5755/j01.itc.48.3.20470 ISSN 1392-124X.
Fernandes, Felipe C., Kirwan, Kerry, Wilson, Peter R. and Coles, Stuart R. (2019) Sustainable alternative composites using waste vegetable oil based resins. Journal of Polymers and the Environment, 27 . pp. 2464-2477. doi:10.1007/s10924-019-01534-8 ISSN 1566-2543.
Fleming, Joseph, Amietszajew, Tazdin, Charmet, JΓ©rΓ΄me, Roberts, Alexander John, Greenwood, David and Bhagat, Rohit (2019) The design and impact of in-situ and operando thermal sensing for smart energy storage. Journal of Energy Storage, 22 . pp. 36-43. doi:10.1016/j.est.2019.01.026 ISSN 2352-152X.
Franciosa, Pasquale, Palit, Arnab, Gerbino, Salvatore and Ceglarek, Darek (2019) A novel hybrid shell element formulation (QUAD+ and TRIA+) : a benchmarking and comparative study. Finite Elements in Analysis and Design, 166 (15). 103319. doi:10.1016/j.finel.2019.103319 ISSN 0168-874X.
Franciosa, Pasquale, Serino, Armando, Al Botros, Rehab and Ceglarek, Darek (2019) Closed-loop gap bridging control for remote laser welding of aluminum components based on first principle energy and mass balance. Journal of Laser Applications, 31 (2). 022416. doi:10.2351/1.5096099 ISSN 1042-346X.
Gao, Xiaolong, Huang, Yao, He, Xiaoxiang, Fan, Xiaojing, Liu, Ying, Xu, Hong, Wu, Daming and Wan, Chaoying (2019) Mechanically enhanced electrical conductivity of polydimethylsiloxane-based composites by a hot embossing process. Polymers, 11 (1). 56. doi:10.3390/polym11010056 ISSN 2073-4360.
Ge, Yangyang, Zhao, Shuo, Ma, Liang, Yan , Tao, Li, Zushu and Yang , Bin (2019) Inclusions control and refining slag optimization for fork flat steel. Metals, 9 (2). 253. doi:10.3390/met9020253
Geitner, Claudia, Biondi , Francesco , Skrypchuk, Lee, Jennings, Paul. A. and Birrell, Stewart A. (2019) The comparison of auditory, tactile, and multimodal warnings for the effective communication of unexpected events during an automated driving scenario. Transportation Research Part F: Psychology and Behaviour, 65 . pp. 23-33. doi:10.1016/j.trf.2019.06.011 ISSN 1369-8478.
Giubileo, Filippo, Grillo, Alessandro, Passacantando, Maurizio, Urban, Francesca, Iemmo, Laura, Luongo, Giuseppe, Pelella, Aniello, Loveridge, Melanie, Lozzi, Luca and Di Bartolomeo, Antonio (2019) Field emission characterization of MoS2 nanoflowers. Nanomaterials, 9 (5). 717. doi:10.3390/nano9050717 ISSN 1847-9804.
Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2019) Quality and productivity driven trajectory optimisation for robotic handling of compliant sheet metal parts in multi-press stamping lines. Robotics and Computer-Integrated Manufacturing, 56 . pp. 264-275. doi:10.1016/j.rcim.2018.10.004 ISSN 0736-5845.
Grandjean, Thomas R. B., Groenewald, Jakobus and Marco, James (2019) The experimental evaluation of lithium ion batteries after flash cryogenic freezing. Journal of Energy Storage, 21 . pp. 202-215. doi:10.1016/j.est.2018.11.027 ISSN 2352-152X.
Grandjean, Thomas R. B., Groenewald, Jakobus, McGordon, Andrew and Marco, James (2019) Cycle life of lithium ion batteries after flash cryogenic freezing. Journal of Energy Storage, 24 . 100804. doi:10.1016/j.est.2019.100804 ISSN 2352-152X.
Guerra, Valentina, Wan, Chaoying, Degirmenci, Volkan, Sloan, Jeremy, Presvytis, Dimitris, Watson, Michael and McNally, Tony (2019) Characterisation of graphite nanoplatelets (GNP) prepared at scale by high-pressure homogenisation. Journal of Materials Chemistry C, 7 (21). pp. 6383-6390. doi:10.1039/C9TC01361J ISSN 2050-7526.
Gupta, Disha, Muthiah, Aravind, Do, Minh Phuong, Sankar, Gopinathan, Hyde, Timothy I., Copley, Mark, Baikie, Tom, Du, Yonghua, Xi, Shibo, Srinivasan, Madhavi and Dong, ZhiLi (2019) Electronic and geometric structures of rechargeable lithium manganese sulfate Li2Mn(SO4)2 cathode. ACS Omega, 4 (7). pp. 11338-11345. doi:10.1021/acsomega.9b00356 ISSN 2470-1343.
Haindl, Silvia, Kampert, Erik, Sasase, Masato, Hiramatsu, Hidenori and Hosono, Hideo (2019) Low anisotropic upper critical fields in SmO1-xFxFeAs thin films with a layered hybrid structure. Superconductor Science and Technology, 32 (4). 044003. doi:10.1088/1361-6668/aafe3d ISSN 0953-2048.
Hosseinzadeh, Elham, Marco, James and Jennings, P. A. (Paul A.) (2019) Combined electrical and electrochemical-thermal model of parallel connected large format pouch cells. Journal of Energy Storage, 22 . pp. 194-207. doi:10.1016/j.est.2019.02.004 ISSN 2352-152X.
Huang, Ruijie, Zhong, Lei, Xie, Fengwei, Wei, Liming, Gan, Lanfang, Wang, Xuejiao and Liao, Anping (2019) Purification, characterization and degradation performance of a novel dextranase from Penicillium cyclopium CICC-4022. International Journal of Molecular Sciences, 20 (6). 1360. doi:10.3390/ijms20061360 ISSN 1422-0067.
Hunt, Matthew (2019) Two-dimensional surface waves in magnetohydrodynamics. Journal of Plasma Physics, 85 (4). 905850405. doi:10.1017/S0022377819000497 ISSN 0022-3778.
Jha, Shristy, Mandal, Animesh and Srirangam, Prakash (2019) Optimization of casting process parameters for synthesis of Al-Nb-B master alloy. JOM, 71 . pp. 397-406. doi:10.1007/s11837-018-3125-4 ISSN 1047-4838.
Ji, Mo, Davis, Claire and Strangwood, Martin (2019) Effect of grain size distribution on recrystallisation kinetics in an Fe-30Ni model alloy. Metals, 9 (3). 369. doi:10.3390/met9030369 ISSN 2075-4701.
Jones, A., Angelopoulou, O. and Noriega, L. (2019) Survey of data remaining on second hand memory cards in the UK. Computers & Security, 84 . pp. 239-243. doi:10.1016/j.cose.2019.03.006 ISSN 0167-4048.
Kamarudin, Muhammad Hilmi, Maple, Carsten and Watson, Tim (2019) Hybrid feature selection technique for intrusion detection system. International Journal of High Performance Computing and Networking (IJHPCN), 13 (2). pp. 232-240. doi:10.1504/IJHPCN.2019.097503 ISSN 1740-0562.
Kisslinger, Ferdinand, RienmΓΌller, Dennis, Ott, Christian, Kampert, Erik and Weber, Heiko B. (2019) Fractional quantum conductance plateaus in mosaic-like conductors and their similarities to the fractional quantum hall effect. Annalen der Physik, 531 (7). 1800188. doi:10.1002/andp.201800188 ISSN 0003-3804.
Koleti, Upender Rao, Zhang, Cheng, Malik, Romeo, Dinh, Quang Truong and Marco, James (2019) The development of optimal charging strategies for lithium-ion batteries to prevent the onset of lithium plating at low ambient temperatures. Journal of Energy Storage, 24 . 100798. doi:10.1016/j.est.2019.100798 ISSN 2352152X.
Koleti, Upender Rao, Zhang, Cheng, Truong, Dinh Quang, Marco, James, Amietszajew, Tazdin and Malik, Romeo (2019) A new concept to improve the lithium plating detection sensitivity in lithium-ion batteries. International Journal of Smart Grid and Clean Energy, 8 (5). pp. 505-516. doi:10.12720/sgce.8.5.505-516 ISSN 2315-4462.
Kong, Xiaodan, Xu, Qi and Zhu, Tao (2019) Dynamic evolution of knowledge sharing behavior among enterprises in the cluster innovation network based on evolutionary game theory. Sustainability, 12 (1). 75. doi:10.3390/su12010075 ISSN 2071-1050.
Kotadia, Hiren R., Franciosa, Pasquale and Ceglarek, Dariusz (2019) Challenges and opportunities in remote laser welding of steel to aluminium. MATEC Web of Conferences, 269 . 02012. doi:10.1051/matecconf/201926902012 ISSN 2261-236X.
Lain, Michael J., Brandon, James and Kendrick, Emma (2019) Design strategies for high power vs. high energy lithium ion cells. Batteries, 5 (4). 64. doi:10.3390/batteries5040064 ISSN 2313-0105.
Lalau, C. C. and Low, John C. T. (2019) Electrophoretic deposition for Lithium-ion battery electrode manufacture. Batteries and Supercaps, 2 (6). pp. 551-559. doi:10.1002/batt.201900017 ISSN 2566-6223.
(2019) A collaborative platform for management of chronic diseases via guideline-driven individualized care plans. Computational and Structural Biotechnology Journal, 17 . pp. 869-885. doi:10.1016/j.csbj.2019.06.003 ISSN 2001-0370.
Lapko, Yulia, Trianni, Andrea, Nuur, Cali and Masi, Donato (2019) In pursuit of closed-loop supply chains for critical materials : an exploratory study in the Green Energy sector. Journal of Industrial Ecology, 23 (1). pp. 182-196. doi:10.1111/jiec.12741 ISSN 1088-1980.
Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Crystallization behavior of liquid CaO-SiO2-FeO-MnO slag in relation to its reaction with moisture. Metallurgical and Materials Transactions B, 50 . pp. 1931-1948. doi:10.1007/s11663-019-01595-z ISSN 1073-5615.
Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Effects of slag composition on H2 generation and magnetic precipitation from molten steelmaking slag-steel reaction. Metallurgical and Materials Transactions B, 50 (2). pp. 1023-1034. doi:10.1007/s11663-019-01533-z ISSN 1073-5615.
Liu, Chunlei, Ding, Wenrui, Yang, Jinyu, Murino, Vittorio, Zhang, Baochang, Han, Jungong and Guo, Guodong (2019) Aggregation signature for small object tracking. IEEE Transactions on Image Processing, 29 . pp. 1738-1747. doi:10.1109/TIP.2019.2940477 ISSN 1057-7149.
Liu, Jun, Wilson, John, Davis, Claire and Peyton, A. J. (2019) Magnetic characterisation of grain size and precipitate distribution by major and minor BH loop measurements. Journal of Magnetism and Magnetic Materials, 481 (1). pp. 55-67. doi:10.1016/j.jmmm.2019.02.088 ISSN 0304-8853.
Liu, Peng, Li, Ying, Shang, Xiaoqin and Xie, Fengwei (2019) Starch-zinc complex and its reinforcement effect on starch-based materials. Carbohydrate Polymers, 206 . pp. 528-538. doi:10.1016/j.carbpol.2018.11.034 ISSN 0144-8617.
Liu, Yang, Gao, Xinbo, Gan, Quanxue, Shao, Ling and Han, Jungong (2019) Adaptive robust principal component analysis. Neural Networks, 119 . pp. 85-92. doi:10.1016/j.neunet.2019.07.015 ISSN 0893-6080.
Liu, Yi, Han, Jungong, Zhang, Qiang and Shan, Caifeng (2019) Deep salient object detection with contextual information guidance. IEEE Transactions on Image Processing, 29 . pp. 360-374. doi:10.1109/TIP.2019.2930906 ISSN 1057-7149.
Loveridge, Melanie, Tan, Chaou C., Maddar, Faduma, Guillaume, Remy, Abbott, Mike, Dixon, Shaun, McMahon, Richard A., Curnick, Ollie, Ellis, Mark, Lain, Mike J., Barai, Anup, Amor-Segan, Mark, Bhagat, Rohit and Greenwood, David G. (2019) Temperature considerations for charging Li-ion batteries : inductive vs. mains charging modes for portable electronic devices. ACS Energy Letters, 4 (5). pp. 1086-1091. doi:10.1021/acsenergylett.9b00663
Luo, Hang, Zhou, Xuefan, Ellingford, Christopher, Zhang, Yan, Chen, Sheng, Zhou, Kechao, Zhang, Dou, Bowen, Chris R. and Wan, Chaoying (2019) Interface design for high energy density polymer nanocomposites. Chemical Society Reviews, 48 (16). pp. 4424-4465. doi:10.1039/c9cs00043g ISSN 1460-4744.
Malas, Asish, Isakov, Dmitry, Couling, Kevin and Gibbons, Gregory John (2019) Fabrication of high permittivity resin composite for vat photopolymerization 3D printing : morphology, thermal, dynamic mechanical and dielectric properties. Materials, 12 (3818). pp. 1-13. doi:10.3390/ma12233818 ISSN 1996-1944.
Malik, Romeo, Loveridge, Melanie, Williams, Luke J., Huang, Qianye, West, Geoffrey D., Shearing, Paul R., Bhagat, Rohit and Walton, Richard I. (2019) Porous metalβorganic frameworks for enhanced performance silicon anodes in lithium-ion batteries. Chemistry of Materials, 31 (11). pp. 4156-4165. doi:10.1021/acs.chemmater.9b00933 ISSN 0897-4756.
Mao, Ken, Ramakrishnan, Ramkumar, Greenwood, David G., Goodship, Vannessa, Shrouti, Chetan, Chetwynd, D. G. and Langlois, Paul (2019) The wear resistance improvement of fibre reinforced polymer composite gears. Wear, 426-427 (Part B). pp. 1033-1039. doi:10.1016/j.wear.2018.12.043 ISSN 0043-1648.
Maple, Carsten, Bradbury, Matthew S., Le, Anhtuan and Ghirardello, Kevin (2019) A connected and autonomous vehicle reference architecture for attack surface analysis. Applied Sciences, 9 (23). 5101. doi:10.3390/app9235101 ISSN 2076-3417.
Mathekga, Mmamolatelo E., Ademi, Sul and McMahon, Richard A. (2019) Brushless doubly fed machine magnetic field distribution characteristics and their impact on the analysis and design. IEEE Transactions on Energy Conversion, 34 (4). pp. 2180-2188. doi:10.1109/TEC.2019.2939183 ISSN 0885-8969.
Mathew, James, Remy, Guillaume , Williams, M. A., Tang, Fengzai and Srirangam, Prakash (2019) Effect of Fe intermetallics on microstructure and properties of Al-7Si alloys. JOM, 71 . pp. 4362-4369. doi:10.1007/s11837-019-03444-5 ISSN 1047-4838.
McCaig, Duncan, Elliott, Mark T., Siew, Cynthia S.Q., Walasek, Lukasz and Meyer, Caroline (2019) Profiling commenters on mental health-related online forums : a methodological example focusing on eating disorder-related commenters. Journal of Medical Internet Research, 6 (4). e12555. doi:10.2196/12555 ISSN 1438-8871.
McTavish, James and Brambley, Edward J. (James) (2019) Nonlinear sound propagation in 2D curved ducts : a multimodal approach. Journal of Fluid Mechanics, 875 . pp. 411-447. doi:10.1017/jfm.2019.497 ISSN 0022-1120.
Mearns, David L., Warnett, Jason M. and Williams, M. A. (2019) An early Portuguese mariner's astrolabe from the SodrΓ© Wreckβsite, Al Hallaniyah, Oman. International Journal of Nautical Archaeology, 48 (2). pp. 495-506. doi:10.1111/1095-9270.12353 ISSN 1057-2414.
Morankar, Swapnil, Mandal, Monalisa, Kourra, Nadia, Williams, M. A., Mitra, Rahul and Srirangam, Prakash (2019) X-Ray tomography study on porosity and particle size distribution in In Situ Al-4.5Cu-5TiB2 Semisolid rolled composites. JOM . doi:10.1007/s11837-019-03385-z ISSN 1047-4838.
Moriceau, Guillaume, Lester, Daniel, Pappas, George S., OβHora, Paul, Winn, Joby, Smith, Timothy and Perrier, SΓ©bastien (2019) Well-defined alkyl functional poly(styrene-co-maleic anhydride) architectures as pour point and viscosity modifiers for lubricating oil. Energy & Fuels, 33 (8). pp. 7257-7264. doi:10.1021/acs.energyfuels.9b01470 ISSN 0887-0624.
Moriceau, Guillaume, Tanaka, Joji, Lester, Daniel, Pappas, George S., Cook, Alexander B., OβHora, Paul, Winn, Joby, Smith, Timothy and Perrier, SΓ©bastien (2019) Influence of grafting density and distribution on material properties using well-defined alkyl functional poly(styrene-co-maleic anhydride) architectures synthesized by RAFT. Macromolecules, 52 (4). pp. 1469-1478. doi:10.1021/acs.macromol.8b02231 ISSN 0024-9297 .
Mukherjee, Ratnajit, Debattista, Kurt, Bashford-Rogers, Thomas, Bessa, Maximino and Chalmers, Alan (2019) Uniform color space based high dynamic range video compression. IEEE Transactions on Circuits and Systems for Video Technology, 29 (7). pp. 2055-2066. doi:10.1109/TCSVT.2018.2861560 ISSN 1051-8215.
Newall, Philip, Moodie, Crawford, Reith, Gerda, Stead, Martine, Critchlow, Nathan, Morgan, Amber and Dobbie, Fiona (2019) Gambling marketing from 2014 to 2018 : a literature review. Current Addiction Reports, 6 . pp. 49-56. doi:10.1007/s40429-019-00239-1 ISSN 2196-2952.
Newall, Philip and Parker, Katie N. (2019) Improved mutual fund investment choice architecture. Journal of Behavioral Finance, 20 (1). 96-106 . doi:10.1080/15427560.2018.1464455 ISSN 1542-7560.
Ocean, Neel, Howley, Peter and Ensor, Jonathan (2019) Lettuce be happy : a longitudinal UK study on the relationship between fruit and vegetable consumption and well-being. Social Science & Medicine, 222 . pp. 335-345. doi:10.1016/j.socscimed.2018.12.017 ISSN 0277-9536.
Oliveira, Luis, Bruen, Claudia, Birrell, Stewart A. and Cain, Rebecca (2019) What passengers really want : assessing the value of rail innovation to improve experiences. Transportation Research Interdisciplinary Perspectives, 1 . 100014. doi:10.1016/j.trip.2019.100014 ISSN 2590-1982.
Oliveira, Luis, Fox, Catherine, Birrell, Stewart A. and Cain, Rebecca (2019) Analysing passengersβ behaviours when boarding trains to improve rail infrastructure and technology. Robotics and Computer-Integrated Manufacturing, 57 . pp. 282-291. doi:10.1016/j.rcim.2018.12.008 ISSN 0736-5845.
Oliveira, Luis, Proctor, Karl, Burns, Christopher G. and Birrell, Stewart (2019) Driving style : how should an automated vehicle behave? Information, 10 (6). 219. doi:10.3390/info10060219 ISSN 2078-2489.
Palit, Arnab, King, Richard, Gu, Yolanda, Pierrepont, James, Simpson, David and Williams, Mark A. (2019) Subject-specific surgical planning for hip replacement : a novel 2D graphical representation of 3D hip motion and prosthetic impingement information. Annals of Biomedical Engineering, 47 . pp. 1642-1656. doi:10.1007/s10439-019-02260-x ISSN 0090-6964.
Pang, Yanwei, Cao, Jiale, Wang, Jian and Han, Jungong (2019) JCS-Net : joint classification and super-resolution network for small-scale pedestrian detection in surveillance images. IEEE Transactions on Information Forensics and Security, 14 (12). pp. 3322-3331. doi:10.1109/TIFS.2019.2916592 ISSN 1556-6013.
Pasco, Corentin, Khan, Muhammad Aurangzeb and Kendall, Kenneth N. (2019) A novel discrete method of shear angle measurement for in-plane shear properties of thermoset prepreg using a point-tracking algorithm. Journal of Composite Materials, 53 (14). pp. 2001-2013. doi:10.1177/0021998318813193 ISSN 0021-9983.
Pastor-Fernandez, Carlos, Yu, Tung Fai, Widanage, Widanalage Dhammika and Marco, James (2019) Critical review of non-invasive diagnosis techniques for quantification of degradation modes in lithium-ion batteries. Renewable and Sustainable Energy Reviews , 109 . pp. 138-159. doi:10.1016/j.rser.2019.03.060 ISSN 1364-0321.
Pathan, Tanveerkhan S., Rashid, Muhammad, Walker, Marc, Widanage, Widanalage Dhammika and Kendrick, Emma (2019) Active formation of Li-ion batteries and its effect on cycle life. Journal of Physics : Energy, 1 (4). 044003. doi:10.1088/2515-7655/ab2e92 ISSN 2515-7655.
Pickford, Tom, Gu, Xu, Heeley, Ellen L. and Wan, Chaoying (2019) Effects of an ionic liquid and processing conditions on the Ξ²-polymorph crystal formation in poly(vinylidene fluoride). CrystEngComm, 21 (36). pp. 5418-5428. doi:10.1039/C9CE01051C ISSN 1466-8033.
Poluektov, Mikhail and Figiel, Lukasz (2019) A numerical method for finite-strain mechanochemistry with localised chemical reactions treated using a Nitsche approach. Computational Mechanics, 63 (5). pp. 885-911. doi:10.1007/s00466-018-1628-z ISSN 0178-7675.
Rashid, Muhammad, Pathan, Tanveerkhan S., McGordon, Andrew, Kendrick, Emma and Widanage, Widanalage Dhammika (2019) Investigation of hysteresis and relaxation behaviour in graphite and LiNi0.33Mn0.33Co0.33O2 electrodes. Journal of Power Sources, 440 . 227153. doi:10.1016/j.jpowsour.2019.227153 ISSN 0378-7753.
Ren, Yaxing, Truong, Dinh Quang, Marco, James and Greenwood, David G. (2019) Torque vectoring based drive assistance system for turning an electric narrow tilting vehicle. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 13 (1). pp. 1-13. doi:10.1177/0959651818823589 ISSN 0959-6518.
Ridge, Alex, Ademi, Sul, McMahon, Richard A. and Kelly, Hugh-Peter (2019) Ferrite-based axial flux permanent magnet generator for wind turbines. Journal of Engineering, 2019 (17). pp. 3942-3946. doi:10.1049/joe.2018.8176 ISSN 2051-3305.
Robbins, Tim, Lim Choi Keung, Sarah Niukyun, Sankaranarayanan, Sailesh, Randeva, Harpal S. and Arvanitis, Theodoros N. (2019) Risk factors for readmission of inpatients with Diabetes : a systematic review. Journal of Diabetes and its Complications, 33 (5). pp. 398-405. doi:10.1016/j.jdiacomp.2019.01.004 ISSN 1056-8727.
Rogall, Martin, Amietszajew, Tazdin, Bhagat, Rohit, Brucoli, Maria and Greenwood, David G. (2019) On the utilisation of the pseudo-capacitive capabilities of Li-ion cells for the provision of frequency response services. Journal of Energy Storage, 22 . pp. 311-317. doi:10.1016/j.est.2019.02.028 ISSN 2352-152X.
Saberi, Aref, Zhang, Shuaizhong, van den Bersselaar, Carola, Kandail, Harkamaljot S., den Toonder, Jaap M. J. and Kurniawan, Nicholas A. (2019) A stirring system using suspended magnetically-actuated pillars for controlled cell clustering. Soft Matter, 15 (6). pp. 1435-1443. doi:10.1039/C8SM01957F ISSN 1744-683X.
Safra, Zvi, Ma, Sinong and Melkonyan, Tigran A. (2019) Is allocation affected by the perception of others' irresponsible behavior and by ambiguity? Risk Analysis, 39 (10). pp. 2182-2196. doi:10.1111/risa.13319 ISSN 0272-4332.
Santos, ClÑudio, Abubakar, Sharbanon, Barros, Ana Cristina, Mendonça, Joana, Dalmarco, Gustavo and Godsell, Janet (2019) Joining global aerospace value networks : lessons for industrial development policies. Space Policy . doi:10.1016/j.spacepol.2019.01.006 ISSN 0265-9646.
Seamer, Paul, Brake, Simon, Moore, Patrick, Mohammed, Mohammed A. and Wyatt, Steven (2019) Did government spending cuts to social care for older people lead to an increase in emergency hospital admissions? An ecological study, England 2005β2016. BMJ Open, 9 (4). e024577. doi:10.1136/bmjopen-2018-024577 ISSN 2044-6055.
SenGupta, A., Santillana, B., Sridhar, S. and Auinger, Michael (2019) Dendrite growth direction measurements : understanding the solute advancement in continuous casting of steel. IOP Conference Series: Materials Science and Engineering, 529 (1). 012065. doi:10.1088/1757-899X/529/1/012065 ISSN 1757-899X.
SenGupta, Arunava, Santillana, Begona, Sridhar, Seetharaman and Auinger, Michael (2019) Transient effect of fluid flow on dendrite growth direction in binary Fe-C alloys using Phase-Field in OpenFOAM. JOM Journal of The Minerals, Metals & Materials Society, 71 (11). pp. 3876-3884. doi:10.1007/s11837-019-03730-2 ISSN 1047-4838.
Shang, Xiaoqin, Jiang, Huihua, Wang, Qingling, Liu, Peng and Xie, Fengwei (2019) Cellulose-starch hybrid films plasticized by aqueous ZnCl2 solution. International Journal of Molecular Sciences, 20 (3). 474. doi:10.3390/ijms20030474 ISSN 1422-0067.
Shaw-Stewart, James, Alvarez-Reguera, Anna, Greszta, Agata, Marco, James, Masood, Maryam, Sommerville, Rob and Kendrick, Emma (2019) Aqueous solution discharge of cylindrical lithium-ion cells. Sustainable Materials and Technologies, 22 . e00110. doi:10.1016/j.susmat.2019.e00110 ISSN 22149937.
Shen, Jialong, Zhou, Lei, Jacobs, Will, Hunt, Peter and Davis, Claire (2019) Real-time in-line steel microstructure control through magnetic properties using an EM sensor. Journal of Magnetism and Magnetic Materials, 490 . 165504. doi:10.1016/j.jmmm.2019.165504 ISSN 0304-8853.
Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514 ISSN 2055-0340.
Slater, Carl, Hechu, Kateryna, Davis, Claire and Sridhar, Seetharaman (2019) Characterisation of the solidification of a molten steel surface using infrared thermography. Metals, 9 (2). 126. doi:10.3390/met9020126 ISSN 2075-4701.
Slater, Carl, Hollyhoke, Neil and Davis, Claire (2019) The influence of alloy composition on the as-cast grain structure in near net shape low-density steels. Ironmaking & Steelmaking, 46 (8). pp. 725-730. doi:10.1080/03019233.2017.1405180 ISSN 0301-9233.
Slater, Carl, Mandal, Abhijit and Davis, Claire (2019) The influence of segregation of Mn on the recrystallization behavior of C-Mn steels. Metallurgical and Materials Transactions B, 50 . pp. 1627-1636. doi:10.1007/s11663-019-01603-2 ISSN 1073-5615.
Sohrabi Safa, Nader , Maple, Carsten, Haghparast, Mahboobeh, Watson, Tim and Dianati, Mehrdad (2019) An opportunistic resource management model to overcome resource-constraint in the Internet of Things. Concurrency and Computation: Practice and Experience, 31 (8). e5014. doi:10.1002/cpe.5014 ISSN 1532-0626.
Sorell, Tom and Whitty, Monica T. (2019) Online romance scams and victimhood. Security Journal, 32 . pp. 342-361. doi:10.1057/s41284-019-00166-w ISSN 0955-1662.
Sudarsan, C., Banker, K. H., Hazra, S. K. , Bhagat, Rohit and Panda, S. K. (2019) Experimental investigations on forming limit diagram of ultra thin SS 304 steel : effect of circular grid size, sheet orientation, punch size and deformation speed. Advances in Materials and Processing Technologies, 5 (1). pp. 25-38. doi:10.1080/2374068X.2018.1510679 ISSN 2374-068X.
Suppatvech, Chutikarn, Godsell, Janet and Day, Steven (2019) The roles of internet of things technology in enabling servitized business models : a systematic literature review. Industrial Marketing Management, 82 . pp. 70-86. doi:10.1016/j.indmarman.2019.02.016 ISSN 0019-8501.
Tan, Xiaoyan, Chen, Ling, Li, Xiaoxi and Xie, Fengwei (2019) Effect of anti-solvents on the characteristics of regenerated cellulose from 1-ethyl-3-methylimidazolium acetate ionic liquid. International Journal of Biological Macromolecules, 124 . pp. 314-320. doi:10.1016/j.ijbiomac.2018.11.138 ISSN 0141-8130.
Tang, Xiaopeng, Liu, Kailong, Wang, Xin, Liu, Boyang, Gao, Furong and Widanage, Widanalage Dhammika (2019) Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries. Journal of Power Sources, 440 . 227118. doi:10.1016/j.jpowsour.2019.227118 ISSN 0378-7753.
Tao, Binglin, Yule, Lewis C., Daviddi, Enrico, Bentley, Cameron Luke and Unwin, Patrick R. (2019) Correlative electrochemical microscopy of Li-Ion (De)intercalation at a series of individual LiMn2 O4 particles. Angewandte Chemie International Edition, 58 (14). pp. 4606-4611. doi:10.1002/anie.201814505 ISSN 1433-7851.
Taylor, James, Barai, Anup, Rajan, Ashwin T., Guo, Yue, Amor-Segan, Mark and Marco, James (2019) An insight into the errors and uncertainty of the lithium-ion battery characterisation experiments. Journal of Energy Storage, 40 . 100761. doi:10.1016/j.est.2019.100761 ISSN 2352-152X.
Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Comparison of formability and microstructural evolution of C106 copper and 316L stainless steel. JOM, 71 . pp. 2721-2727. doi:10.1007/s11837-019-03603-8 ISSN 1047-4838.
Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Influence of elevated temperatures on mechanical properties and microstructure of C106 Copper investigated by in-situ heated stage EBSD analysis. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50 . pp. 4493-4497. doi:10.1007/s11661-019-05374-y ISSN 1073-5623.
Tejpal, Shilpa, Sanghera, Narinder, Manoharan, Vijayalaxmi, Planas-Iglesias, Joan, Myler, Kate and Klein-Seetharaman, Judith (2019) Towards personalised molecular feedback for weight loss. BMC Obesity, 6 (1). 20. doi:10.1186/s40608-019-0237-5 ISSN 2052-9538.
Urasinska-Wojcik, Barbara, Chilton, Neil, Todd, Peter M., Elsworthy, Christopher, Bates, Myles, Roberts, Gethin and Gibbons, Gregory John (2019) Integrated manufacture of polymer and conductive tracks for real-world applications. Additive Manufacturing, 29 . 100777. doi:10.1016/j.addma.2019.06.028 ISSN 2214-8604 .
Walshe, Marcus, Epiphaniou, Gregory, Al-Khateeb, Haider, Hammoudeh, Mohammad, Katos, Vasilios and Dehghantanha, Ali (2019) Non-interactive zero knowledge proofs for the authentication of IoT devices in reduced connectivity environments. Ad Hoc Networks, 95 . 101988. doi:10.1016/j.adhoc.2019.101988 ISSN 15708705.
Wang, Fei, Davis, Claire and Strangwood, Martin (2019) Grain growth on reheating for an as-cast Al-Nb-containing steel with segregated composition. Materials Science and Technology, 35 (5). pp. 615-627. doi:10.1080/02670836.2019.1577533 ISSN 0267-0836.
Watson, Gregory A., Steadman, Liam, Purser, David, Kirk, Richard, Kenny, Melissa and Bradbury, Matthew S. (2019) Organising a multidisciplinary postgraduate colloquium. Exchanges: The Interdisciplinary Research Journal, 6 (2). pp. 86-101. doi:10.31273/eirj.v6i2.348 ISSN 2053-9665.
White, Hannah J., Haycraft, Emma and Meyer, Caroline (2019) Family mealtime negativity and adolescent binge-eating : a replication and extension study in a community sample. Eating Behaviors, 34 . 101306. doi:10.1016/j.eatbeh.2019.101306 ISSN 14710153.
Whitty, Monica T. (2019) Predicting susceptibility to cyber-fraud victimhood. Journal of Financial Crime, 26 (1). pp. 277-292. doi:10.1108/JFC-10-2017-0095 ISSN 1359-0790.
Whitty, Monica T. (2019) Who can spot an online romance scam? Journal of Financial Crime, 26 (2). pp. 623-633. doi:10.1108/JFC-06-2018-0053 ISSN 1359-0790.
Woodman, Roger, Lu, Ke, Higgins, Matthew D., Brewerton, Simon, Jennings, Paul A. and Birrell, Stewart A. (2019) Gap acceptance study of pedestrians crossing between platooning autonomous vehicles in a virtual environment. Transportation Research Part F: Traffic Psychology and Behaviour, 67 . pp. 1-14. doi:10.1016/j.trf.2019.09.017 ISSN 1369-8478.
Worwood, Daniel, Marco, James, Kellner, Quirin, Hosseinzadeh, Elham, McGlen, Ryan, Mullen, David, Lynn, Kevin and Greenwood, David G. (2019) Experimental analysis of a novel cooling material for large format automotive lithium-ion cells. Energies, 12 (7). pp. 1-32. 1251. doi:10.3390/en12071251 ISSN 1996-1073.
Xie, Fengwei, Zhang, Tianlong, Bryant, Peter, Kurusingal, Valsala, Colwell, John M. and Laycock, Bronwyn (2019) Degradation and stabilization of polyurethane elastomers. Progress in Polymer Science, 90 . pp. 211-268. doi:10.1016/j.progpolymsci.2018.12.003 ISSN 0079-6700.
Xu, Jinchuan, Tan, Xiaoyan, Chen, Ling, Li, Xiaoxi and Xie, Fengwei (2019) Starch/microcrystalline cellulose hybrid gels as gastric-floating drug delivery systems. Carbohydrate Polymers, 215 . pp. 151-159. doi:10.1016/j.carbpol.2019.03.078 ISSN 0144-8617.
Xu, Renze, Zhang, Jianliang, Li, Zushu and Zhao, Yongan (2019) Corrosion behavior of alumina containing refractory in blast furnace hearth by CaO-SiO2-MgO-Al2O3-Cr2O3 system slags. ISIJ International, 59 (11). pp. 1933-1939. doi:10.2355/isijinternational.ISIJINT-2019-149 ISSN 0915-1559.
Yang, H., Van Den Berg, F. D., Bos, C., Luinenburg, A., Mosk, J., Hunt, P., Dolby, M., Hinton, J., Peyton, A. J. and Davis, Claire (2019) Em sensor array system and performance evaluation for in-line measurement of phase transformation in steel. Insight - Non-Destructive Testing and Condition Monitoring, 61 (3). pp. 153-157. doi:10.1784/insi.2019.61.3.153 ISSN 1354-2575.
Yeo, Zhiquan, Masi, Donato, Sze Choong Low, Jonathan, Ng, Yen Ting, Siew Tan, Puay and Barnes, Stuart (2019) Tools for promoting industrial symbiosis : a systematic review. Journal of Industrial Ecology, 23 (5). pp. 1087-1108. doi:10.1111.jiec.12846 ISSN 1088-1980.
Yule, Lewis C., Bentley, Cameron Luke, West, Geoffrey D., Shollock, Barbara A. and Unwin, Patrick R. (2019) Scanning electrochemical cell microscopy : a versatile method for highly localised corrosion related measurements on metal surfaces. Electrochimica Acta, 298 . pp. 80-88. doi:10.1016/j.electacta.2018.12.054 ISSN 0013-4686.
Yule, Lewis C., Shkirskiy, Viacheslav, Aarons, Jolyon, West, Geoffrey D., Bentley, Cameron Luke, Shollock, Barbara A. and Unwin, Patrick R. (2019) Nanoscale active sites for the hydrogen evolution reaction on low carbon steel. The Journal of Physical Chemistry C, 123 (9). pp. 24146-24155. doi:10.1021/acs.jpcc.9b07216 ISSN 1932-7447.
Zhang, Baochang, Yang, Wankou, Wang, Ze, Zhuo, Lian, Zhen, Xiantong and Han, Jungong (2019) The structure transfer machine theory and applications. IEEE Transactions on Image Processing, 29 . 2889 -2902. doi:10.1109/TIP.2019.2954178 ISSN 1057-7149.
Zhang, Binjia, Gilbert, Elliot P., Qiao, Dongling, Xie, Fengwei, Wang, David K., Zhao, Siming and Jiang, Fatang (2019) A further study on supramolecular structure changes of waxy maize starch subjected to alkaline treatment by extended-q small-angle neutron scattering. Food Hydrocolloids, 95 . pp. 133-142. doi:10.1016/j.foodhyd.2019.04.031 ISSN 0268-005X.
Zhang, Qiang, Huang, Nianchang, Yao, Lin, Zhang, Dingwen, Shan, Caifeng and Han, Jungong (2019) RGB-T salient object detection via fusing multi-level CNN features. IEEE Transactions on Image Processing, 29 . pp. 3321-3335. doi:10.1109/TIP.2019.2959253 ISSN 1057-7149.
Zhang, Yan, Ellingford, Christopher, Zhang, Runan, Roscow, James, Hopkins, Margaret, Keogh, Patrick, McNally, Tony, Bowen, Chris and Wan, Chaoying (2019) Electrical and mechanical self-healing in high-performance dielectric elastomer actuator materials. Advanced Functional Materials, 29 (15). 1808431. doi:10.1002/adfm.201808431 ISSN 1616-301X.
Zhou, Lei, Hall, Russell and Davis, Claire (2019) Measured and modelled low field relative permeability for dual phase steels at high temperature. Journal of Magnetism and Magnetic Materials, 475 . pp. 38-43. doi:10.1016/j.jmmm.2018.11.096 ISSN 0304-8853.
Book Item
Bilici, Eda, Despotou, George and Arvanitis, Theodoros N. (2019) Concurrent execution of multiple computer-interpretable clinical practice guidelines and their interrelations. In: Mantas, John and Hasman, Arie and Gallos, Parisis and Kolokathi, Aikaterini, (eds.) Health Informatics Vision: From Data via Information to Knowledge. Studies in Health Technology and Informatics, 262 . I O S Press, pp. 7-10. ISBN 9781614999867
Despotou, George, Yuksel, Mustafa, Sarigul, Bunyamin and Arvanitis, Theodoros N. (2019) Drug interaction advisory service for clinical decision support of multimordity patient centric care plans in the C3-cloud system. In: Mantas, John and Hasman, Arie and Gallos, Parisis and Aikaterini, Kolokathi, (eds.) Health Informatics Vision : From Data via Information to Knowledge. Studies in Health Technology and Informatics, 262 . I O S Press, pp. 388-391. ISBN 9781614999867
Ferri, Carlo (2019) Uncertainty in measurement. In: Intelligent System and Computing. IntechOpen.
Leeson, Mark S. and Higgins, Matthew D. (2019) Optical wireless and millimeter waves for 5G access networks. In: Kishk, Ahmed, (ed.) The fifth generation (5G) of wireless communication. London: IntechOpen, pp. 5-23. ISBN 9781789857702
Traore, Lamine, Assele-Kama, Ariane, Lim Choi Keung, Sarah Niukyun, Karni, Liran, Klein, Gunnar O., Lilja, Mikael, Scandurra, Isabella, Verdoy, Dolores, Yuksel, Mustafa, Arvanitis, Theodoros N., Tsopra, Rosy and Jaulent, Marie-Christine (2019) User-centered design of the C3-cloud platform for elderly with multiple diseases - functional requirements and application testing. In: MEDINFO 2019: Health and Wellbeing e-Networks for All : Proceedings of the 17th World Congress on Medical and Health Informatics. Studies in Health Technology and Informatics, 264 . IOS Press, pp. 843-847. ISBN 9781643680026
Conference Item
Adegoke, Elijah, Zidan, Jasmine, Kampert, Erik, Jennings, P. A. (Paul A.), Ford, Colin, Birrell, Stewart A. and Higgins, Matthew D. (2019) Evaluating machine learning & antenna placement for enhanced GNSS accuracy for CAVs. In: 2019 IEEE Intelligent Vehicles Symposium, Paris, France, 9-12 Jun 2019. Published in: 2019 IEEE Intelligent Vehicles Symposium (IV) doi:10.1109/IVS.2019.8813775
Ademi, Sul, McMahon, Richard A., Zhu, Lianchen and Sadeghi, Ramtin (2019) Impact of transmission topology for protective operations in multi-terminal HVDC networks. In: 2019 IEEE International Conference on Industrial Technology (ICIT), Melbourne, Australia, 13-15 Feb 2019. Published in: 2019 IEEE International Conference on Industrial Technology (ICIT) doi:10.1109/ICIT.2019.8755063 ISSN 2641-0184.
Agca, Ahmet Onur, Ignatius, Joshua, Godsell, Janet and Ozden, Mucahit (2019) Demystifying supply chain visibility - a systematic literature review. In: 26th EurOMA Conference, Helsinki, 2019, Helsinki, 17-19 Jun 2019
Ahmad, Bilal and Mohammed, Abdul Rehan Khan (2019) Manufacturing enhancement through reduction of cycle time using time-study statistical techniques in automotive industry. In: ICPS2019 IEEE International Conference on Industrial Cyber-Physical Systems, Taipei, Taiwan, 6-9 May 2019. Published in: Proceedings of ICPS 2019 ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780198
Amamra, Sid-Ali, Shi, Kai, Dinh, Truong Quang and Marco, James (2019) Optimal day ahead scheduling for plug-in electric vehicles in an industrial microgrid based on V2G system. In: ICMT 2019 - 23rd International Conference on Mechatronics Technology, Italy, 23 β 26 Oct 2019
Angelopoulou, O., Pourmoafi, S., Jones, A. and Sharma, G. (2019) Killing your device via your USB port. In: Thirteenth International Symposium on Human Aspects of Information Security & Assurance, Nicosia, Cyprus, 15-16 Jul 2019 . Published in: Proceedings of the Thirteenth International Symposium on Human Aspects of Information Security & Assurance (HAISA 2019) pp. 61-72. ISBN 9780244190965.
Arnold, Eduardo, Al-Jarrah, Omar Y., Dianati, Mehrdad, Fallah, Saber, Oxtoby, David and Mouzakitis, Alexandros (2019) Cooperative object classification for driving applications. In: IEEE Symposium on Intelligent Vehicle, Paris, France, 9-12 Jun 2019. Published in: 2019 IEEE Intelligent Vehicles Symposium (IV) pp. 2484-2489. doi:10.1109/IVS.2019.8813811 ISSN 2642-7214.
Assad, Fadi, Alkan, Bugra, Kaniappan Chinnathai, Malarvizhi, Ahmad, Mus'ab, Rushforth, Emma and Harrison, Robert (2019) A framework to predict energy related key performance indicators of manufacturing systems at early design phase. In: CIRP CMS 2019 , Ljubljana, Slovenia, 12-14 Jun 2019. Published in: Procedia CIRP, 81 pp. 145-150. doi:10.1016/j.procir.2019.03.026 ISSN 2212-8271.
Atmaca, U. I., Maple, Carsten and Dianati, Mehrdad (2019) Emerging privacy challenges and approaches in CAV systems. In: Living in the Internet of Things (IoT 2019), London, UK, 1-2 May 2019 ISBN 9781839530890. doi:10.1049/cp.2019.0141
Boyes, Hugh and Watson, Tim (2019) Towards a secure and resilient IoT architecture for smart home energy management. In: Living in the Internet of Things, London, 1-2 May 2019. Published in: Proceedings of Living in the Internet of Things ISBN 9781839530890. doi:10.1049/cp.2019.0161
Bradbury, Matthew S., Jhumka, Arshad and Maple, Carsten (2019) The impact of decreasing transmit power levels on FlockLab to achieve a sparse network. In: 2nd Workshop on Benchmarking Cyber-Physical Systems and Internet of Things, Montreal, Canada, 15 Apr 2019. Published in: CPS-IoTBench '19 : Proceedings of the 2nd Workshop on Benchmarking Cyber-Physical Systems and Internet of Things pp. 7-12. ISBN 9781450366939. doi:10.1145/3312480.3313171
Bui, Truong Minh Ngoc, Faraji-Niri, Mona, Worwood, Daniel, Dinh, Truong Quang and Marco, James (2019) An advanced hardware-in-the-loop battery simulation platform for the experimental testing of battery management system. In: 23rd International Conference on Mechatronics Technology (ICMT2019), University of Salerno, Salerno, Italy, 23-26 Oct 2019
Burns, Christopher , Oliveira, Luis, Thomas, Peter, Iyer, Sumeet and Birrell, Stewart A. (2019) Pedestrian decision-making responses to external human-machine interface designs for autonomous vehicles. In: IEEE Intelligent Vehicles Symposium (IV) , Paris, France, 9-12 Jun 2019. Published in: 2019 IEEE Intelligent Vehicles Symposium (IV) pp. 70-75. ISBN 9781728105604 . doi:10.1109/IVS.2019.8814030 ISSN 2642-7214 .
Cannizzaro, Sara, Procter, Rob, Ma, Sinong and Maple, Carsten (2019) Adoption and acceptability of smart devices for the home. In: Petras IoT Conference, London, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) ISBN 9781839530890. doi:10.1049/cp.2019.0153
Carvalho, Graca, Ritchie, Alisdair and Fradkin, E. D. (2019) Innovation ecosystems : greater than the sum of their parts? In: Living in the Internet of Things (IoT 2019), London, UK, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) p. 26. ISBN 9781839530890. doi:10.1049/cp.2019.0151
Despotou, George, Yuksel, Mustafa, Laleci, Gokce, Keenoy, Esteban De Manuel, Lim Choi Keung, Sarah Niukyun, Verdoy Berastegui, Dolores, Zhao, Lei and Arvanitis, Theodoros N. (2019) Facilitating coordinated care for multi-morbidity patients through integrated preventive Clinical Decision Support (C3-Cloud). In: 19th International Conference on Integrated Care, San Sebastian, 1-3 Apr 2019. Published in: International Journal of Integrated Care, 19 (4). doi:10.5334/ijic.s3029 ISSN 1568-4156.
Ding, Xiaohan, Ding, Guiguang, Guo, Yuchen, Han, Jungong and Yan, Chenggang (2019) Approximated oracle filter pruning for destructive CNN width optimization. In: ICML 2019 ; 36th International Conference on Machine Learning, California, 10-15 Jun 2019. Published in: Proceedings of the 36th International Conference on Machine Learning
Ding, Xiaohan, Ding, Guiguang, Zhou, Xiangxin, Guo, Yuchen, Han, Jungong and Liu, Ji (2019) Global sparse momentum SGD for pruning very deep neural networks. In: 33rd Conference on Neural Information Processing Systems (NeurIPS 2019), Vancouver, Canada, 8-14 Dec 2019. Published in: Advances in Neural Information Processing Systems 32 (NIPS 2019), 32
Faraji Niri, Mona, Marco, James, Dinh, Quang Truong and Yu, Tung Fai (2019) Two layer Markov model for prediction of future load and end of discharge time of batteries. In: International Conference on Mechatronics Technology , Salerno, Italy, 23-26 Dec 2019
Farrell, Marie, Bradbury, Matthew S., Fisher, Michael, Dennis, Louise A., Dixon, Claire, Yuan, Hu and Maple, Carsten (2019) Using threat analysis techniques to guide formal verification : a case study of cooperative awareness messages. In: SEFM 2019: 17th edition of the International Conference on Software Engineering and Formal Methods, Oslo, Norway, 16-20 Sep 2020. Published in: Software Engineering and Formal Methods. SEFM 2019, 11724 pp. 471-490. ISBN 9783030304454. doi:10.1007/978-3-030-30446-1_25
Ferri, Carlo (2019) Reflections upon measurement and uncertainty in measurement. In: 18th Online World Conference on Soft Computing in Industrial Applications (WSC18), 1-12 Dec 2014. Published in: Proceedings of the 18th Online World Conference on Soft Computing in Industrial Applications (WSC18), 864 pp. 234-243. ISBN 9783030006105. doi:10.1007/978-3-030-00612-9_20 ISSN 2194-5357.
Franciosa, Pasquale, Sun, Tianzhu, Ceglarek, Darek, Gerbino, Salvatore and Lanzotti, Antonio (2019) Multi-wave light technology enabling closed-loop in-process quality control for automotive battery assembly with remote laser welding. In: SPIE Optical Metrology, 2019, Munich, 24-27 Jun 2019. Published in: Proceedings of SPIE - International Society for Optical Engineering, 11059 p. 9. doi:10.1117/12.2526075 ISSN 0277-786X.
Gangopadhyay, Briti, Khastgir, Siddartha, Dey, Sumanta, Dasgupta, Pallab, Montana, Giovanni and Jennings, Paul. A. (2019) Identification of test cases for Automated Driving Systems using Bayesian optimization. In: 2019 IEEE Intelligent Transportation Systems Conference (ITSC), Auckland, New Zealand, 27-30 Oct 2019. Published in: 2019 IEEE Intelligent Transportation Systems Conference (ITSC) pp. 1961-1967. ISBN 9781538670255. doi:10.1109/ITSC.2019.8917103
Grandjean, Thomas R. B., Taylor, J. E., McGordon, Andrew and Marco, James (2019) Improved sizing calculator for rapid optimisation of pack configuration at early-stage automotive product development. In: 2018 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, USA, 27β30 Aug 2018. Published in: 2018 IEEE Vehicle Power and Propulsion Conference (VPPC) doi:10.1109/VPPC.2018.8605003 ISSN 1938-8756.
Groenewald, Jakobus, Dhadyalla, Gunwant, Chan, P. H., Feng, J., Roberts, K., Jennings, P. A. (Paul A.) and Makinson, F. (2019) Certifying a synthetic environment for CAV validation and verification. In: Driving Simulation Conference Europe 2019 VR β 18th Driving Simulation & Virtual Reality Conference & Exhibition, Strasbourg, France, 4-6 Sep 2019. Published in: Proceedings of the DSC 2019 Europe VR β Driving Simulation Conference & Exhibition. ISBN 9782857827498 .
Grosso, Jasmine, Jhumka, Arshad and Bradbury, Matthew S. (2019) Reliable many-to-many routing in wireless sensor networks using ant colony optimisation. In: European Dependable Computing Conference, Naples, Italy, 17-20 Sep 2019. Published in: 2019 15th European Dependable Computing Conference (EDCC) ISBN 9781728139296. doi:10.1109/EDCC.2019.00030
Hadeed, Reem, Godsell, Janet and Day, Steven (2019) Analysing supply chain strategies in healthcare from patient flow perspective : a systematic literature review. In: 26th Annual EurOMA Conference, Helsinki, Finland, 17-19 Jun 2019. Published in: Proceedings of the 26th Annual EurOMA Conference (Unpublished)
Hui, Xia, He, Ligang, Wang, Bin, Chang, Cheng, Han, Xie and Maple, Carsten (2019) Developing offloading-enabled application development frameworks for android mobile devices. In: The 20th IEEE International Conference on High Performance Computing and Communications (HPCC-2018) , Exeter, UK, 28-30 Jun 2018. Published in: 2018 IEEE 20th International Conference on High Performance Computing and Communications; IEEE 16th International Conference on Smart City; IEEE 4th International Conference on Data Science and Systems (HPCC/SmartCity/DSS) ISBN 9781538666159. doi:10.1109/HPCC/SmartCity/DSS.2018.00086
Jabar, Sharhid, West, Geoffrey D., Shollock, Barbara A. and Siefert, John (2019) Metallurgical risk factors in grade 91 steel. In: Joint EPRI-123HiMAT Conference on Advances in High Temperature Materials, Nagasaki, Japan, 21-25th Oct 2019. Published in: Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials (2019) pp. 235-245. ISBN 9781627082716.
Jbair, Mohammad, Ahmad, Bilal, Ahmad, Mus'ab, Vera, Daniel A., Harrison, Robert and Ridler, Tony (2019) Automatic PLC code generation based on virtual engineering model. In: IEEE International Conference on Industrial Cyber-Physical Systems (ICPS 2019), Taipei, Taiwan, 6-9 May 2019 pp. 675-680. ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780213
Jemmett, Philip N., Burton, Diane, Cannon, Emily, Harris, Laura, Diebolt, Marie and Low, Margaret (2019) Open-ended project work : sharpening students skills. In: 7th Annual Conference of the UK & Ireland Engineering Education Research Network, University of Warwick, UK, 16-17 Dec 2019. Published in: The proceedings of the 7th Annual Conference of the UK & Ireland Engineering Education Research Network pp. 190-199. ISBN 9780993424571.
Jones, Richard W. and Despotou, Georgios (2019) Unmanned aerial systems and healthcare : possibilities and challenges. In: 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA), Xi'an, China, 19-21 Jun 2019. Published in: 2019 14th IEEE Conference on Industrial Electronics and Applications (ICIEA) pp. 189-194. ISBN 9781538694916. doi:10.1109/ICIEA.2019.8834142 ISSN 2158-2297.
Kaniappan Chinnathai, Malarvizhi, Al-Mowafy, Zeinab, Alkan, Bugra, Vera, Daniel A. and Harrison, Robert (2019) A framework for pilot line scale-up using digital manufacturing. In: 52nd CIRP conference on manufacturing systems, Slovenia, 12-14 Jun 2019. Published in: Procedia CIRP, 81 pp. 962-967. doi:10.1016/j.procir.2019.03.235 ISSN 2212-8271.
Kohr, Dominik, Ahmad, Mussawar, Alkan, Bugra, Kaniappan Chinnathai, Malarvizhi, Budde, Lukas, Vera, Daniel, Friedli, Thomas and Harrison, Robert (2019) Proposing a holistic framework for the assessment and management of manufacturing complexity through data-centric and human-centric approaches. In: International Conference on Complexity, Future Information Systems and Risk, Funchal, Madeira, Portugal, 20-21 Mar 2018. Published in: Proceedings of the 3rd International Conference on Complexity, Future Information Systems and Risk - Volume 1: COMPLEXIS, 86-93, 2018, Funchal, Madeira, Portugal, 1 pp. 86-93. ISBN 9789897582974. doi:10.5220/0006692000860093
Le, Anhtuan and Maple, Carsten (2019) Shadows donβt lie : n-sequence trajectory inspection for misbehaviour detection and classification in VANETs. In: 2019 IEEE 90th Vehicular Technology Conference : VTC2019, Honolulu, Hawaii, 22-25 Sep 2019. Published in: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall) doi:10.1109/VTCFall.2019.8891137 ISSN 2577-2465.
Le, Anhtuan and Maple, Carsten (2019) A simplified approach for dynamic security risk management in connected and autonomous vehicles. In: Living in the Internet of Things (IoT 2019), London, 1-2 May 2019. Published in: Living in the Internet of Things (IoT 2019) ISBN 9781839530890. doi:10.1049/cp.2019.0140
Li, Liuying, Zhang, Cheng, Marco, James and Widanage, Widanalage Dhammika (2019) Control-oriented implementation and model order reduction of a lithium-ion battery electrochemical model. In: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Hanoi, Vietnam, Vietnam, 14-17 Oct 2019. Published in: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC) pp. 1-5. ISBN 9781728112497. doi:10.1109/VPPC46532.2019.8952373 ISSN 1938-8756.
Lin, Tzu-Chi , Amamra, Sid Ali and Marco, James (2019) Connected-autonomous electric vehicles based on DC-bus stabilisation using hybrid storage system. In: EVER2019 : Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Grimaldi Forum, Monte Carlo, Monaco, 8-10 May 2019. Published in: 2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER) ISBN 9781728137049. doi:10.1109/EVER.2019.8813637
Martinez-Vera, Erik, Marco, James, Ramirez-Cortez, J. M and Rangel-Magdalen0, J. (2019) Development of a lithium-ion battery model and state of charge estimation algorithm with hardware-in-the-loop validation. In: IEEE International Instrumentation and Measurement Technology Conference, Auckland, New Zealand, 20-23 May 2019. Published in: 2019 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) doi:10.1109/I2MTC.2019.8827050 ISSN 2642-2069.
Moeini, Rana, Weston, Paul, Tricoli, Pietro, Dinh, Truong Quang, McGordon, Andrew and Hughes, Darren J. (2019) Enhancement of reliability in condition monitoring techniques in wind turbines. In: 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, 23-26 Oct 2019. Published in: 23rd International Conference on Mechatronics Technology (ICMT) pp. 1-6. ISBN 9781728139999. doi:10.1109/ICMECT.2019.8932141
Mohammed, Abdul Rehan Khan and Ahmad, Bilal (2019) Literature survey about elements of manufacturing shop floor operation key performance indicators. In: 2019 5th International Conference on Control, Automation and Robotics (ICCAR), Beijing, China, 19-22 Apr 2019. Published in: 2019 5th International Conference on Control, Automation and Robotics (ICCAR) ISBN 9781728133256. doi:10.1109/ICCAR.2019.8813436 ISSN 2251-2446.
Ozden, Mucahit, Ignatius, Joshua, Masi, Donato and Agca, Ahmet Onur (2019) Purchase intention towards remanufactured products : a systematic literature review. In: EurOMA 2019, Helsinki, Finland, 17-19 Jun 2019 (Unpublished)
Palit, Arnab, King, Richard, Gu, Yolanda, Pierrepont, James, Hart, Zoe, Elliott, Mark T. and Williams, Mark A. (2019) Prediction and visualisation of bony impingement for subject specific total hip arthroplasty. In: 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC 2019) , Berlin, Germany, 23-27 Jul 2019. Published in: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) doi:10.1109/EMBC.2019.8857861 ISSN 1558-4615.
PerellΓ³-March, Jaume R., Burns, Christopher, Elliott, Mark T. and Birrell, Stewart A. (2019) Integrating trust in automation into driver state monitoring systems. In: 1st International Conference on Human Interaction and Emerging Technologies (IHIET 2019), Nice, France, 22-24 Aug 2019. Published in: Human Interaction and Emerging Technologies. IHIET 2019, 1018 pp. 344-349. ISBN 9783030256289. doi:10.1007/978-3-030-25629-6_53 ISSN 2194-5357.
Rout, Bapin Kumar, Brooks, G., Rhamdhani, M. A., Li, Zushu and van der Knoop, W. (2019) The behavior of manganese in oxygen steelmaking. In: AISTech 2018 - The Iron & Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018. Published in: 2018 AISTech Conference Proceedings
Sarafianos, Dimitrios, Llan, Danilo X., McMahon, Richard, Flack, Timothy and Pickering, Stephen (2019) Efficiency loss breakdown for a synchronous rectification scheme for automotive applications. In: PEMD 2018, Liverpool, UK, 17-19 Apr 2018. Published in: The 9th IET International Conference on Power Electronics, Machines and Drives (PEMD) 2018 17- 19 April 2018, Liverpool ACC, Liverpool, UK ISBN 9781785618215 . doi:10.1049/joe.2018.8241 ISSN 0537-9989.
Shaikh, Usama F., Das, Abhishek, Barai, Anup and Masters, Iain (2019) Electro-thermo-mechanical behaviours of laser joints for electric vehicle battery interconnects. In: 2019 Electric Vehicles International Conference (EV), Bucharest, Romania, 3-4 Oct 2019. Published in: 2019 Electric Vehicles International Conference (EV) ISBN 9781728107912. doi:10.1109/EV.2019.8892972
Sinha, Sumit, Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Dariusz (2019) 3D convolutional neural networks to estimate assembly process parameters using 3D point-clouds. In: SPIE Optical Metrology, Munich, Germany, 24-27 Jun 2019. Published in: Proceedings of SPIE : Multimodal Sensing: Technologies and Applications, 11059 p. 10. doi:10.1117/12.2526062 ISSN 0277-786X.
Titmarsh, Rohin and Harrison, Robert (2019) Automated leak testing for cylindrical cell automotive battery modules : enabling data visibility using industry 4.0. In: ICMT 2019, Salerno, Italy, 23-26 Oct 2019. Published in: 2019 23rd International Conference on Mechatronics Technology (ICMT) ISBN 9781728139982. doi:10.1109/ICMECT.2019.8932152
Vitolo, F., Franciosa, Pasquale, Ceglarek, Darek, Pantalano, S. and De Martino, M. (2019) A generalised multi-attribute task sequencing approach for robotics optical inspection systems. In: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), Naples, Italy, 4-6 Jun 2019. Published in: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT) ISBN 9781728104300. doi:10.1109/METROI4.2019.8792869
Wang, Jianguo and McMahon, Richard A. (2019) Reliable control of direct PWM AC-AC buck converter with short circuit protection. In: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, 12-14 Jun 2019. Published in: 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE) pp. 950-954. ISBN 9781728136660. doi:10.1109/ISIE.2019.8781419 ISSN 2163-5145.
Whulanza, Yudan, Hakim, Taufik Ariesta, Utomo, Muhammad S., Fadhilah, Shabrina, Charmet, JΓ©rΓ΄me, Irwansyah, Ridho, Warjito, and Kiswanto, Gandjar (2019) Design and evaluation of pneumatic micropump module for a portable polymerase chain reaction kit. In: The 10th International Meeting of advances in thermofluids (IMAT 2018): Smart City: Advances in Thermofluid Technology in Tropical Urban Development, Bali, Indonesia, 16β17 Nov 2018. Published in: AIP Conference Proceedings, 2062 (1). ISBN 978-0-7354-1790-8. doi:10.1063/1.5086596 ISSN 0094-243X.
Woodman, Roger, Hill, William D., Birrell, Stewart A. and Higgins, Matthew D. (2019) An evolutionary approach to the optimisation of autonomous pod distribution for application in an urban transportation service. In: 2019 23rd International Conference on Mechatronics Technology (ICMT), Salerno, Italy, 23-26 Oct 2019. Published in: 2019 23rd International Conference on Mechatronics Technology (ICMT) pp. 1-6. ISBN 9781728139982. doi:10.1109/ICMECT.2019.8932138
Woodman, Roger, Lu, Ke, Higgins, Matthew D., Brewerton, Simon, Jennings, Paul. A. and Birrell, Stewart A. (2019) A human factors approach to defining requirements for low-speed autonomous vehicles to enable intelligent platooning. In: 2019 IEEE Intelligent Vehicles Symposium (IV), 9-12 Jun 2019, Paris, France pp. 2371-2376. doi:10.1109/IVS.2019.8814128 ISSN 2642-7214.
Yang, Shanshan, (Researcher in computer science) and Evans, Chris (2019) Opportunities and challenges in using AI Chatbots in Higher Education. In: The 3rd International Conference on Education and E-Learning (ICEEL 2019), Barcelona, Spain, 5-7 Nov 2019. Published in: Proceedings of the 2019 3rd International Conference on Education and E-Learning pp. 79-83. ISBN 9781450372251. doi:10.1145/3371647.3371659
Yeo, Zhiquan, Choong Low, Jonathan Sze, Loong Tan, Daren Zong, Chung, Si Ying, Tjandra, Tobias Bestari and Ignatius, Joshua (2019) A collaboration platform for enabling industrial symbiosis : towards creating a self-learning waste-to-resource database for recommending industrial symbiosis transactions using text analytics. In: 26th CIRP Conference on Life Cycle Engineering, Purdue University, West Lafayette, IN, May 7-9 2019. Published in: Procedia CIRP, 80 pp. 643-648. doi:10.1016/j.procir.2019.01.015 ISSN 2212-8271.
Yuan, Hu, Bradbury, Matthew S., Maple, Carsten and Gu, Chen (2019) Throughput aware authentication prioritisation for vehicular communication networks. In: 2019 IEEE 90th Vehicular Technology Conference : VTC2019-Fall , Honolulu, Hawaii, 22β25 Sep 2019. Published in: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall) pp. 1-5. ISBN 9781728112206. doi:10.1109/VTCFall.2019.8891375 ISSN 2577-2465.
Yuan, Hu, Maple, Carsten and Ghirardello, Kevin (2019) Dynamic route selection for vehicular store-carry-forward networks and misbehaviour vehicles analysis. In: 2018 IEEE 88th Vehicular Technology Conference: VTC2018-Fall, Chicago, USA, 27β30 Aug 2018. Published in: 2018 IEEE 88th Vehicular Technology Conference (VTC-Fall) doi:10.1109/VTCFall.2018.8690703 ISSN 2577-2465.
Zabihi, Nima, Logan, Tom, Ademi, Sul and McMahon, Richard A. (2019) Performance of SiC power electronics devices in DC-DC boost synchronous converters for EV applications. In: Domestic Use of Energy Conference, Cape Town, South Africa, 25-27 Mar 2019 (Unpublished)
Zabihi, Nima, Mumtaz, Asim, Logan, Tom, Daranagama, Thilini and McMahon, Richard A. (2019) SiC power devices for applications in hybrid and electric vehicles. In: European Conference on Silicon Carbide and Related Materials (ECSCRM 2018), Birmingham, 2-6 Sep 2018. Published in: Silicon carbide and related materials 2018 : 12th European conference on Silicone Carbide and Related Materials (ECSCRM 2018), 963 pp. 869-872. ISBN 9783035713329.
Zafeiriadis, Alexandros and Agca, Ahmet Onur (2019) An approach for identifying collaborative business opportunities for networked organizations : application to connected and autonomous vehicles. In: 26th EurOMA Conference, Helsinki, Finland, 17-19 Jun 2019 (Unpublished)
Journal Item
Newall, Philip (2019) Dark nudges in gambling. Addiction Research & Theory, 27 (2). pp. 65-67. ISSN 1606-6359 doi:10.1080/16066359.2018.1474206
Yuan, Hu, Maple, Carsten, Lu, Yi and Watson, Tim (2019) Peer-assisted location authentication and access control for wireless networks. Internet Technology Letters . e71. ISSN 2476-1508 doi:10.1002/itl2.71
Submitted Journal Article
Boyes, Hugh (2019) Solutions for systems engineering resilience and security. (Submitted)
Report
Wakenshaw, Susan Y. L. and Dhamotharan, Lalitha (2019) The digital person - the state of the art and science : a white paper from the 2nd Wolfson - HAT international symposium on the digital person. HAT Community Foundation.
Image
Small, Neil (2019) Thickness strain evolution in a Marciniak test. [Image] (Unpublished)
Dataset
Small, Neil and Hazra, S. K. (2019) Data for Digital image correlation of Marciniak tests for AA6111-T4 (1.2mm). [Dataset]