A

Abd Halim, Nor Farah Huda Binti, Ascroft, Helen and Barnes, Stuart (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: International Conference on Advances in Materials and Processing Technologies (AMPT), Kuala Lumpur, Malaysia, 8–11 Nov 2016. Published in: Procedia Engineering, 184 pp. 185-191. ISSN 1877-7058.

Ahmed, A., Bengherbia, T., Zhvansky, R., Ferrara, G., Wen, J. X. (Jennifer X.) and Stocks, Nigel G. (2016) Validation of geometry modelling approaches for offshore gas dispersion simulations. Journal of Loss Prevention in the Process Industries, 44 . pp. 594-600. doi:10.1016/j.jlp.2016.07.009 ISSN 0950-4230.

Ahmad, Mussawar, Ahmad, Bilal, Harrison, Robert, Alkan, Bugra, Vera, Daniel A., Meredith, James O. and Bindel, Axel (2016) A framework for automatically realizing assembly sequence changes in a virtual manufacturing environment. In: 26th CIRP Design, Stockholm, 15-17 Jun 2016. Published in: Procedia CIRP ISSN 2212-8271.

Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2016) Engineering methods and tools for cyber–physical automation systems. Proceedings of the IEEE , PP (99). pp. 1-13. doi:10.1109/JPROC.2015.2510665 ISSN 0018-9219.

B

Barai, Anup, Tangirala, Ravichandra, Uddin, Kotub, Chevalier, Julie, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells. Journal of Energy Storage, 13 . pp. 211-219. doi:10.1016/j.est.2017.07.021 ISSN 2352-152X.

Barai, Anup, Uddin, Kotub, Chevalier, Julie, Chouchelamane, G. H., McGordon, Andrew, Low, John C. T. and Jennings, P. A. (Paul A.) (2017) Transportation safety of lithium iron phosphate batteries - a feasibility study of storing at very low states of charge. Scientific Reports, 7 (5128). doi:10.1038/s41598-017-05438-2 ISSN 2045-2322.

Barai, Anup, Rajan, Ashwin T., Christos, Iraklis, McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) Scale-up of lithium-ion battery model parameters from cell level to module level – identification of current issues. Energy Procedia, 138 . pp. 223-228. doi:10.1016/j.egypro.2017.10.154 ISSN 1876-6102.

Barai, Anup, Widanage, Widanalage Dhammika, McGordon, Andrew and Jennings, P. A. (Paul A.) (2016) The influence of temperature and charge-discharge rate on open circuit voltage hysteresis of an LFP Li-ion battery. In: 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 27-29 Jun 2016. Published in: 2016 IEEE Transportation Electrification Conference and Expo (ITEC) ISBN 9781509004041.

Bruen, Thomas, Hooper, James Michael, Marco, James, Gama, Miguel and Chouchelamane, Gael (2016) Analysis of a battery management system (BMS) control strategy for vibration aged nickel manganese cobalt oxide (NMC) Lithium-Ion 18650 battery cells. Energies, 9 (4). pp. 1-20. doi:10.3390/en9040255 ISSN 1996-1073.

Bhattacharyya, Kumar (2015) Smarter–lighter–greener : research innovations for the automotive sector. Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences, 471 (2179). 20140938. doi:10.1098/rspa.2014.0938 ISSN 1364-5021.

Bruen, Thomas, Marco, James and Gama, Miguel (2015) Model based design of balancing systems for electric vehicle battery packs. In: IFAC Workshop on Engine and Powertrain Control, Simulation and Modelling, Ohio, USA, 23-26 Aug 2015 pp. 1-8. doi:10.1016/j.ifacol.2015.10.057 (Submitted)

D

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L. and Corrochano, D. (2017) Powertrain modelling for engine stop-start dynamics and control of micro/mild hybrid construction machines. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 231 (3). pp. 439-456. doi:10.1177/1464419317709894 ISSN 1464-4193.

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part B : a real-time comparative study. Energies, 10 (9). 1250. doi:10.3390/en10091250 ISSN 1996-1073.

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part A : fundamental concepts and design. Energies, 10 (7). 962. doi:10.3390/en10070962 ISSN 1996-1073.

F

Ferrari, Stefania, Loveridge, Melanie, Beattie, Shane D., Jahn, Marcus, Dashwood, R. J. and Bhagat, Rohit (2015) Latest advances in the manufacturing of 3D rechargeable lithium microbatteries. Journal of Power Sources, Volume 286 . pp. 25-46. doi:10.1016/j.jpowsour.2015.03.133 ISSN 0378-7753.

G

Grandjean, Thomas R. B., Barai, Anup, Hosseinzadeh, Elham, Guo, Yue, McGordon, Andrew and Marco, James (2017) Large format lithium ion pouch cell full thermal characterisation for improved electric vehicle thermal management. Journal of Power Sources, 359 . pp. 215-225. doi:10.1016/j.jpowsour.2017.05.016 ISSN 0378-7753.

Groenewald, J., Grandjean, Thomas R. B. and Marco, James (2017) Accelerated energy capacity measurement of lithium-ion cells to support future circular economy strategies for electric vehicles. Renewable and Sustainable Energy Reviews, 69 . pp. 98-111. doi:10.1016/j.rser.2016.11.017 ISSN 1364-0321.

Grandjean, Thomas R. B., McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) Structural identifiability of equivalent circuit models for Li-Ion batteries. Energies, 10 (1). 90. doi:10.3390/en10010090 ISSN 1996-1073.

H

Hartwell, Ian and Marco, James (2016) Management of intellectual property uncertainty in a remanufacturing strategy for automotive energy storage systems. Journal of Remanufacturing, 6 (1). doi:10.1186/s13243-016-0025-z ISSN 2210-464X.

Hooper, James Michael, Marco, James, Chouchelamane, Gael Henri, Lyness, Christopher and Taylor, James (2016) Vibration durability testing of Nickel Cobalt Aluminum Oxide (NCA) lithium-ion 18650 battery cells. Energies, 9 (4). 281. doi:10.3390/en9040281 ISSN 1996-1073.

Hooper, James Michael and Marco, James (2015) Experimental modal analysis of lithium-ion pouch cells. Journal of Power Sources, Volume 286 . pp. 247-259. doi:10.1016/j.jpowsour.2015.03.098 ISSN 0378-7753.

K

Kaniappan Chinnathai, Malarvizhi, Alkan, Bugra and Harrison, Robert (2017) Convertibility evaluation of automated assembly system designs for high variety production. In: 27th CIRP Design 2017, Cranfield University, 10-12 May 2017. Published in: Procedia CIRP, 60 pp. 74-79. ISSN 2212-8271.

Kaniappan Chinnathai, Malarvizhi, Günther, Till, Ahmad, Mussawar, Stocker, Cosima, Richter, Lukas, Schreiner, David, Vera, Daniel A., Reinhart, Gunther and Harrison, Robert (2017) An application of physical flexibility and software reconfigurability for the automation of battery module assembly. Procedia CIRP, 63 . pp. 604-609. doi:10.1016/j.procir.2017.03.128 ISSN 2212-8271.

Kellner, Quirin, Widanage, Widanalage Dhammika and Marco, James (2016) Battery power requirements in high-performance electric vehicles. In: 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 27-29 Jun 2016 pp. 1-6. doi:10.1109/ITEC.2016.7520194

L

Luo, Hua, Zhang, Yue, Li, Wei, Huang, Li-Ke, Cosmas, John, Li, Dayou, Maple, Carsten and Zhang, Xun (2018) Low latency parallel turbo decoding implementation for future terrestrial broadcasting systems. IEEE Transactions on Broadcasting, 64 (1). pp. 96-104. doi:10.1109/TBC.2017.2704425 ISSN 0018-9316.

Li, Dezhi (2017) Influence of aluminium sheet surface modification on the self-piercing riveting process and the joint static lap shear strength. The International Journal of Advanced Manufacturing Technology, 93 (5-8). pp. 2685-2695. doi:10.1007/s00170-017-0710-6 ISSN 0268-3768.

Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2017) Self-piercing riveting - a review. The International Journal of Advanced Manufacturing Technology, 92 (5-8). pp. 1777-1824. doi:10.1007/s00170-017-0156-x ISSN 0268-3768.

Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2017) Development of a novel process for energy and materials recovery in steelmaking slags. Mineral Processing and Extractive Metallurgy , 126 (1-2). pp. 94-105. doi:10.1080/03719553.2016.1259871 ISSN 0371-9553.

Linhart, W. M., Rajpalke, M. K., Buckeridge, John, Murgatroyd, P. A. E., Bomphrey, John James, Alaria, J., Catlow, C. R. A., Scanlon, D. O., Ashwin, M. J. and Veal, T. D. (Tim D.) (2016) Band gap reduction in InNxSb1-x alloys : optical absorption, k · P modeling, and density functional theory. Applied Physics Letters, 109 (13). 132104. doi:10.1063/1.4963836 ISSN 0003-6951.

Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2016) Self-piercing riveting - a review. Working Paper. Coventry: University of Warwick WMG. (Unpublished)

Love, James H., Roper, Stephen and Zhou, Ying (2015) Experience, age and exporting performance in UK SMEs. International Business Review, 25 (4). pp. 806-819. ISSN 0969-5931.

Leung, P. K., Moreno, C., Masters, Iain, Hazra, S. K. , Conde, B., Mohamed, M. R., Dashwood, R. J. and Bhagat, Rohit (2014) Real-time displacement and strain mappings of lithium-ion batteries using three-dimensional digital image correlation. Journal of Power Sources, Volume 271 . pp. 82-86. doi:10.1016/j.jpowsour.2014.07.184 ISSN 0378-7753.

M

Mu, Mulan, Wan, Chaoying and McNally, Tony (2017) Thermal conductivity of 2D nano-structured graphitic materials and their composites with epoxy resins. 2D Materials, 4 (4). 042001. doi:10.1088/2053-1583/aa7cd1 ISSN 2053-1583.

N

Nikolka, Mark, Nasrallah, Iyad, Rose, Bradley, Ravva, Mahesh Kumar, Broch, Katharina, Harkin, David, Charmet, Jérôme, Hurhangee, Michael, Brown, Adam, Illig, Steffen, Too, Patrick, Jongman, Jan, McCulloch, Iain, Bredas, Jean-Luc and Sirringhaus, Henning (2017) High operational and environmental stability of high-mobility conjugated polymer field-effect transistors achieved through the use of molecular additives. Nature Materials, 16 (3). pp. 356-362. doi:10.1038/nmat4785 ISSN 1476-1122.

Niedderer, Kristina, Ludden, Geke, Clune, Stephen, Lockton, Dan, MacKrill, James B., Morris, Andrew, Cain, Rebecca, Gardiner, Edward, Evans, Martyn, Gutteridge, Robin and Hekkert, Paul (2016) Design for behaviour change as a driver for sustainable innovation : challenges and opportunities for implementation in the private and public sectors. International Journal of Design, 10 (2). pp. 67-85. ISSN 1991-3761.

P

Pastor-Fernandez, Carlos, Widanage, Widanalage Dhammika, Marco, James, Gama-Valdez, Miguel-Angel and Chouchelamane, Gael. H. (2016) Identification and quantification of ageing mechanisms in Lithium-ion batteries using the EIS technique. In: 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 27-29 Jun 2016 pp. 1-6. doi:10.1109/ITEC.2016.7520198

R

Russell, Stephen, Jennings, M. R. (Michael R.), Dai, Tianxiang, Li, Fan, Hamilton, Dean P., Fisher, Craig A., Sharma, Yogesh K., Mawby, P. A. (Philip A.) and Pérez-Tomás, Amador (2017) Functional oxide as an extreme high-k dielectric towards 4H-SiC MOSFET incorporation. Materials Science Forum, 897 . pp. 155-158. doi:10.4028/www.scientific.net/MSF.897.155 ISSN 1662-9752.

Rajan, Ashwin T., McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) A mass transfer based variable porosity model with particle radius change for a Lithium-ion battery. Electrochimica Acta, 232 . pp. 203-214. doi:10.1016/j.electacta.2017.02.129 ISSN 0013-4686.

Rajan, Ashwin T., McGordon, Andrew, Widanage, Widanalage Dhammika and Jennings, P. A. (Paul A.) (2017) Modified electrochemical parameter estimation of NCR18650BD battery using implicit finite volume method. Journal of Power Sources, 341 . pp. 387-395. doi:10.1016/j.jpowsour.2016.12.023 ISSN 0378-7753.

Rajan, Ashwin T., McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) Electrochemical modelling of Li-ion battery pack with constant voltage cycling. Journal of Power Sources, 341 . pp. 327-339. doi:10.1016/j.jpowsour.2016.11.092 ISSN 0378-7753.

S

Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John (2017) Inkjet-printed polyvinyl alcohol multilayers. Journal of Visualized Experiments, 123 . e55093. doi:10.3791/55093 ISSN 1940-087X.

Stevenson, Matt, Pandor, Abdullah, Martyn-St James, Marrissa, Rafia, Rachid, Uttley, Lesley, Stevens, John, Sanderson, Jean, Wong, Ruth, Perkins, Gavin D., McMullan, Ronan and Dark, Paul (2016) Sepsis: the LightCycler SeptiFast Test MGRADE®, SepsiTest™ and IRIDICA BAC BSI assay for rapidly identifying bloodstream bacteria and fungi – a systematic review and economic evaluation. Health Technology Assessment, 20 (46). pp. 1-246. doi:10.3310/hta20460 ISSN 1366-5278.

U

Uddin, Kotub, Gough, Rebecca, Radcliffe, Jonathan, Marco, James and Jennings, P. A. (Paul A.) (2017) Techno-economic analysis of the viability of residential photovoltaic systems using lithium-ion batteries for energy storage in the United Kingdom. Applied Energy, 206 . pp. 12-21. doi:10.1016/j.apenergy.2017.08.170 ISSN 0306-2619.

Uddin, Kotub, Jackson, Tim, Widanage, Widanalage Dhammika, Chouchelamane, Gael, Jennings, P. A. (Paul A.) and Marco, James (2017) On the possibility of extending the lifetime of lithium-ion batteries through optimal V2G facilitated by a flexible integrated vehicle and smart-grid system. Energy, 133 . pp. 710-722. doi:10.1016/j.energy.2017.04.116 ISSN 0360-5442.

Uddin, Kotub, Somerville, Limhi, Barai, Anup, Lain, Michael J., Rajan, Ashwin T., Jennings, P. A. (Paul A.) and Marco, James (2017) The impact of high-frequency-high-current perturbations on film formation at the negative electrode-electrolyte interface. Electrochimica Acta, 233 . pp. 1-12. doi:10.1016/j.electacta.2017.03.020 ISSN 0013-4686.

Uddin, Kotub , Moore, Andrew D. , Barai, Anup and Marco, James (2016) The effects of high frequency current ripple on electric vehicle battery performance. Applied Energy, 178 . pp. 142-154. doi:10.1016/j.apenergy.2016.06.033 ISSN 0306-2619.

Uddin, Kotub, Perera, Surak, Widanage, Widanalage Dhammika, Somerville, Limhi and Marco, James (2016) Characterising lithium-ion battery degradation through the identification and tracking of electrochemical battery model parameters. Batteries, 2 (2). p. 13. doi:10.3390/batteries2020013 ISSN 2313-0105.

W

Winnett, James, Iraklis, Athanasios, Keating, Elspeth, McGordon, Andrew, Ridler, Tony and Hughes, Darren J. (2017) Automotive to rail : can technologies cross the gap? In: IMechE Stephenson Conference 2017: Research for Railways, London, 25-27 April 2017. Published in: Stephenson Conference : Research for Railways 2017 pp. 529-538. ISBN 9781510882959 .

Widanage, Widanalage Dhammika, Barai, Anup, Chouchelamane, G.H., Uddin, Kotub, McGordon, Andrew, Marco, James and Jennings, P. A. (Paul A.) (2016) Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 2 : model estimation. Journal of Power Sources, 324 . pp. 61-69. doi:10.1016/j.jpowsour.2016.05.014 ISSN 0378-7753.

X

Xue, Mingzhan, Weickert, Martin O., Qureshi, S. A., Kandala, Ngianga-Bakwin, Anwar, Attia, Waldron, Molly, Shafie, Alaa, Messenger, David, Fowler, Mark, Jenkins, Gail, Rabbani, Naila and Thornalley, Paul J. (2016) Improved glycemic control and vascular function in overweight and obese subjects by glyoxalase 1 inducer formulation. Diabetes . db160153. doi:10.2337/db16-0153 ISSN 0012-1797.

Y

Yuan, Hu, Bradbury, Matthew S., Maple, Carsten and Gu, Chen (2019) Throughput aware authentication prioritisation for vehicular communication networks. In: 2019 IEEE 90th Vehicular Technology Conference : VTC2019-Fall , Honolulu, Hawaii, 22–25 Sep 2019. Published in: 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall) pp. 1-5. ISBN 9781728112206. doi:10.1109/VTCFall.2019.8891375 ISSN 2577-2465.

Yang, Yang, Zhou, Deyu, He, Yulan and Zhang, Meng (2019) Interpretable relevant emotion ranking with event-driven attention. In: 2019 Conference on Empirical Methods in Natural Language Processing and 9th International Joint Conference on Natural Language Processing (EMNLP-IJCNLP), Hong Kong, China, 3-7 Nov 2019. Published in: Proceedings of the 2019 Conference on Empirical Methods in Natural Language Processing and the 9th International Joint Conference on Natural Language Processing (EMNLP-IJCNLP) pp. 177-187. doi:10.18653/v1/D19-1017

Z

Zeng, Jichuan, Li, Jing, He, Yulan, Gao, Cuiyun, Lyu, Michael and King, Irwin (2019) What you say and how you say it : joint modeling of topics and discourse in microblog conversations. Transactions of the Association for Computational Linguistics, 7 . pp. 267-281. doi:10.1162/tacl_a_00267 ISSN 2307-387X.

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2018) Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion. Additive Manufacturing, 24 . pp. 552-559. doi:10.1016/j.addma.2018.10.040 ISSN 2214-8604 .

Zhang, Cheng, Allafi, Walid, Dinh, Quang Truong, Ascencio Ormeno, Pedro and Marco, James (2018) Online estimation of battery equivalent circuit model parameters and state of charge using decoupled least squares technique. Energy, 142 . pp. 678-688. doi:10.1016/j.energy.2017.10.043 ISSN 0360-5442.

Zhang, Cheng, Marco, James, Allafi, Walid, Dinh, Quang Truong and Widanage, Widanalage Dhammika (2017) Online battery electric circuit model estimation on continuous-time domain using linear integral filter method. In: 19th International Conference on Hybrid and Electric Vehicles, Prague, 23-24 Mar 2017. Published in: Proceedings of the World Academy of Science, Engineering and Technology, 4 (3). p. 823. ISSN 2010-376X.

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2016) Development of a direct feed fused deposition modelling technology for multi-material manufacturing. In: 19th International Conference on Material Forming – ESAFORM 2016, Nantes, France, 26-29 Apr 2016. Published in: ESAFORM 2016 : Proceedings of the 19th international ESAFORM conference on material forming 190004 . ISBN 9780735414273.