The Library
Browse by Funders
Up a level |
Number of items: 15.
Somerville, Limhi, BareΓ±o, J., Jennings, P. A. (Paul A.), McGordon, Andrew, Lyness, Christopher and Bloom, I. (2016) The effect of pre-analysis washing on the surface film of graphite electrodes. Electrochimica Acta, 206 . pp. 70-76. doi:10.1016/j.electacta.2016.04.133 ISSN 0013-4686.
Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2016) A comprehensive framework for automotive sustainability assessment. Journal of Cleaner Production, 135 . pp. 1034-1044. doi:10.1016/j.jclepro.2016.07.027 ISSN 0959-6526.
Uddin, Kotub , Moore, Andrew D. , Barai, Anup and Marco, James (2016) The effects of high frequency current ripple on electric vehicle battery performance. Applied Energy, 178 . pp. 142-154. doi:10.1016/j.apenergy.2016.06.033 ISSN 0306-2619.
Melnicuk, Vadim, Birrell, Stewart A., Crundall, Elizabeth and Jennings, P. A (2016) Towards hybrid driver state monitoring : review, future perspectives and the role of consumer electronics. In: IEEE Intelligent Vehicle Symposium (IV), Gothenburg, Sweden, 19-22 Jun 2016. Published in: 2016 IEEE Intelligent Vehicles Symposium (IV) 1392 -1397.
Bruen, Thomas, Hooper, James Michael, Marco, James, Gama, Miguel and Chouchelamane, Gael (2016) Analysis of a battery management system (BMS) control strategy for vibration aged nickel manganese cobalt oxide (NMC) Lithium-Ion 18650 battery cells. Energies, 9 (4). pp. 1-20. doi:10.3390/en9040255 ISSN 1996-1073.
Tripathy, Yashraj, McGordon, Andrew, Low, John C. T. and Marco, James (2016) Low temperature performance of Lithium-ion batteries for different drive cycles. In: Electric Vehicle Symposium (EVS 29), MontrΓ©al, QuΓ©bec, 19-21 Jun 2016 pp. 1-12.
Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2016) Self-piercing riveting - a review. Working Paper. Coventry: University of Warwick WMG. (Unpublished)
Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2015) A comprehensive review of full cost accounting methods and their applicability to the automotive industry. Journal of cleaner production, 108 (Part A). pp. 1123-1139. doi:10.1016/j.jclepro.2015.06.040 ISSN 0959-6526.
Barai, Anup, Widanage, Widanalage Dhammika, Marco, James, McGordon, Andrew and Jennings, P. A. (Paul A.) (2015) A study of the open circuit voltage characterization technique and hysteresis assessment of lithium-ion cells. Journal of Power Sources, Volume 295 . pp. 99-107. doi:10.1016/j.jpowsour.2015.06.140 ISSN 0378-7753.
Hooper, James Michael and Marco, James (2015) Experimental modal analysis of lithium-ion pouch cells. Journal of Power Sources, Volume 286 . pp. 247-259. doi:10.1016/j.jpowsour.2015.03.098 ISSN 0378-7753.
Bruen, Thomas, Marco, James and Gama, Miguel (2015) Model based design of balancing systems for electric vehicle battery packs. In: IFAC Workshop on Engine and Powertrain Control, Simulation and Modelling, Ohio, USA, 23-26 Aug 2015 pp. 1-8. doi:10.1016/j.ifacol.2015.10.057 (Submitted)
Taylor, James, Ball, Robert, McGordon, Andrew, Uddin, Kotub and Marco, James (2015) Sizing tool for rapid optimisation of pack configuration at early-stage automotive product development. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-6 May 2015
Tripathy, Yashraj, Marco, James, McGordon, Andrew and Gama-Valdez , Miguel (2014) State-of-charge estimation algorithms and their implications on cells in parallel. In: IEEE International Electric Vehicle Conference 2014, Florence, Italy, 17β19 Dec 2014. Published in: 2014 IEEE International Electric Vehicle Conference (IEVC) ISBN 9781479960750. doi:10.1109/IEVC.2014.7056168
Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, Mike (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. doi:10.1016/j.jmatprotec.2010.02.019 ISSN 0924-0136.
Han, Li, Thornton, Martin and Shergold, Mike (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. doi:10.1016/j.matdes.2009.08.031 ISSN 0264-1275.