Journal Article

Barnes, Stuart, Morgan, Richard and Skeen, Andrew. (2003) Effect of laser pre-treatment on the machining performance of aluminum/SiC MMC. Journal of Engineering Materials and Technology, Volume 125 (Number 4). pp. 378-384. ISSN 0094-4289

Barnes, Stuart, Nash, Michael J. and Kwok, Y. K.. (2003) Surface modification of powder metallurgy components with a direct diode laser. Journal of Engineering Materials and Technology, Volume 125 (Number 4). pp. 372-377. ISSN 0094-4289

Barnes, Stuart, Timms, N., Bryden, B. G. and Pashby, I. R.. (2003) High power diode laser cladding. Journal of Materials Processing Technology, Volume 138 (Number 1-3). pp. 411-416. ISSN 0924-0136

Botelho, E., Figiel, Lukasz, Rezendeb, M. C. and Laukea, B.. (2003) Mechanical behavior of carbon fiber reinforced polyamide composites. Composites Science and Technology, Volume 63 (Number 13). pp. 1843-1855. ISSN 0266-3538

Camelio, Jaime, Hu, S. Jack and Ceglarek, Darek. (2003) Modeling variation propagation of multi-station assembly systems with compliant parts. Journal of Mechanical Design, Vol.125 (No.4). pp. 673-681. ISSN 1050-0472

Debattista, Kurt, Vella, K. and Cordina, J.. (2003) Wait-free cache-affinity thread scheduling. IEE Proceedings - Software, Vol.150 (No.2). p. 137. ISSN 1462-5970

Figiel, Lukasz and Kamiński, Marcin. (2003) Mechanical and thermal fatigue delamination of curved layered composites. Computers & Structures, Volume 81 (Number 18-19). pp. 1865-1873. ISSN 0045-7949

Gibbons, Gregory John, Hansell, Robert G., Norwood, A. J. and Dickens, P. M.. (2003) Rapid laminated die-cast tooling. Assembly Automation, 23 (4). pp. 372-381. ISSN 0144-5154

Godsell, Janet and Harrison, A.. (2003) Customer responsiveness : the new challenge for supply chain management. Odyssey, 17 . pp. 4-5.

Godsell, Janet and Harrison, A.. (2003) Managing the supply chain. Finance & Management (August). pp. 4-6.

Goodship, V., Cain, R. L., Reynolds, N. and Pharaoh, Mark W.. (2003) The WEEE Directive : information and opportunities for plastics recycling. Progress in Rubber, Plastics and Recycling Technology, Volume 18 (Number 3). pp. 161-172. ISSN 1477-7606

Goodship, V., Kirwan, Kerry, Goodhead, T. C. and Smith, Gordon. (2003) Interfacial instabilities in multimaterial co-injection mouldings - Part 2 - Interfacial mixing in transparent mouldings. Plastics, Rubber and Composites, Vol.32 (No.3). pp. 98-103. ISSN 1465-8011

James, C. J. and Gibson, O.J.. (2003) Temporally constrained ica: an application to artifact rejection in electromagnetic brain signal analysis. IEEE Transactions on Biomedical Engineering, Vol. 50 (No. 9). pp. 1108-1116. ISSN 0018-9294

James, C. J. and Lowe, D.. (2003) Extracting multisource brain activity from a single electromagnetic channel. Artificial Intelligence in Medicine, Vol. 28 (No. 1). pp. 89-104. ISSN 09333657

Johnson, R. Mark, Tucker, Nick and Barnes, Stuart. (2003) Impact performance of Miscanthus/Novamont Mater-Bi (R) biocomposites. Polymer Testing, Volume 22 (Number 2). pp. 209-215. ISSN 0142-9418

Kirwan, Kerry, Tucker, N. and Johnson, M.. (2003) Nature's way - sustainable polymers and composites. Materials World, Vol.11 (No.10). pp. 32-34. ISSN 0967-8638

Kong, Zhenyu and Ceglarek, Darek. (2003) Rapid deployment of reconfigurable assembly fixtures using workspace synthesis and visibility analysis. CIRP Annals - Manufacturing Technology, Vol.52 (No.1). pp. 13-16. ISSN 0007-8506

Li, K. H., Lee, S. S. F., Li, C. K. and Lu, Dawei. (2003) Application of Fuzzy C-means Algorithm in SMT Assembly Grouping Problem. The HKIE Transactions, Vol. 10 (No. 3). pp. 20-25.

Lu, Dawei and Antony, Jiju. (2003) Implications of B2B marketplace to supply chain development. The TQM Magazine, Vol.15 (No.3). pp. 173-179. ISSN 0954-478X

Mania, Katerina, Troscianko, Tom, Hawkes, Rycharde and Chalmers, Alan. (2003) Fidelity metrics for virtual environment simulations based on spatial memory awareness states. Presence, Vol.12 (No.3). pp. 296-310. ISSN 1054-7460

Modi, Dhiren, Šimáček, Pavel and Advani, Suresh. (2003) Influence of injection gate definition on the flow-front approximation in numerical simulations of mold-filling processes. International Journal for Numerical Methods in Fluids, Volume 42 (Number 11). pp. 1237-1248. ISSN 0271-2091

Pashby, I. R., Barnes, Stuart and Bryden, B. G.. (2003) Surface hardening of steel using a high power diode laser. Journal of Materials Processing Technology, Volume 139 (Number 1-3). pp. 585-588. ISSN 0924-0136

Payne, Sarah R. and Spencer, Christopher. (2003) Sheffield's skateboarders move to the vest-pocket park : how planning can resolve conflicts between users of valued urban spaces. Sheffield Online Papers in Social Research (SHoP) (Number 7). ISSN 1470-0689

Shiu, B.W., Apley, D.W, Ceglarek, Darek and Shi, J.. (2003) Tolerance allocation for compliant beam structure assemblies. IIE Transactions, Vol.35 (No.4). pp. 329-342. ISSN 0740-817X

Verhaeghe, G., Hilton, P. and Barnes, Stuart. (2003) Achieving low-porosity laser welds in aerospace aluminium alloy. SAE Technical Papers (Number 2003-01-2895). pp. 286-294. ISSN 0148-7191

Verhaeghe, G., Hilton, P. A. and Barnes, Stuart. (2003) Laser-welding aluminium. Aerospace Engineering, Volume 23 (Number 9). pp. 21-24. ISSN 2156-7743

Wimpenny, D. I. and Gibbons, Gregory John. (2003) Metal spray tooling for composite forming. Journal of Materials Processing Technology, 138 (1–3). pp. 443-448. ISSN 0924-0136

Yu Ding, , Pansoo Kim, , Ceglarek, Darek and Jionghua Jin, . (2003) Optimal sensor distribution for variation diagnosis in multistation assembly processes. IEEE Transactions on Robotics and Automation, Vol.19 (No.4). pp. 543-556. ISSN 1042-296X

Conference Item

Attwells, R. L., Birrell, Stewart A., Hooper, R. H. and Mansfield, N. J. (2003) Influence of carrying heavy loads on soldiers’ dynamic trunk and head posture. In: 5th International Conference on Sport, Leisure and Ergonomics, The Wirral, UK, 19-21 Nov 2003. Published in: Journal of Sports Science, Vol.24 (No.6).

Britnell, David John, Tucker, N., Smith, G. F. and Wong, S. S. F. (2003) Bent pultrusion - a method for the manufacture of pultrudate with controlled variation in curvature. In: 9th International Manufacturing Conference, Hong Kong, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, Volume 138 (Special Issue). pp. 311-315.

Davis, Neil D., Jones, Jeffrey Alun and Warrington, Les (2003) A framework for documenting and analyzing life-cycle costs using a simple network based representation. In: 49th Annual Reliability and Maintainability Symposium, Tampa, Florida, 27-30 January 2003 pp. 232-236.

Figiel, Lukasz and Kamiński, M. (2003) Computational fatigue crack growth analysis in layered composites. In: Computational Fluid and Solid Mechanics 2003, 17-20 Jun 2003. Published in: Proceedings Second MIT Conference on Compurational Fluid and Solid Mechanics June 17–20, 2003 pp. 258-260.

Godsell, Janet and Harrison, A. (2003) Supply chain management : putting the end customer first. In: 8th International Symposium on Logistics, Seville, Spain, 6 - 8 July 2003. Published in: Proceedings of the 8th International Symposium on Logistics pp. 699-704.

Kirwan, Kerry and Smith, Gordon (2003) Polymeric automotive body systems. In: 5th International Conference on Materials for Lean Weight Vehicles , International Manufacturing Centre, University of Warwick, Coventry, UK, 5-6 Nov 2003. Published in: 5th International Conference on Materials for Lean Weight Vehicles : 5 - 6 November 2003, [International Manufacturing Centre, University of Warwick, Coventry, UK]

Kong, Z. and Ceglarek, Darek (2003) Fixture configuration synthesis for reconfigurable assembly using procrustes-based pairwise optimization. In: 31st North American Manufacturing Research Conference (NAMRC), McMaster University, Hamilton, Ontario, Canada, May 2003. Published in: Transactions of the North American Manufacturing Research Conference, Vol.31 pp. 403-410.

Wimpenny, D. I., Bryden, B. and Pashby, I. R. (2003) Rapid laminated tooling. In: 9th International Manufacturing Conference, Hong Kong, China, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, 138 (1-3). pp. 214-218.