Allen, A. J., Shayler, P. J. and Roberts, A. L. (2004) Integrating the real time simulation of diesel engine behaviour and hardware-in-the loop technology to Aid ECU/EMS development. In: IMechE Conference on Internal Combustion Engine Performance and Emissions, London, UK, 7-8 Dec 2004. Published in: Proc of IMechE Conf C622

Attwells, R. L., Birrell, Stewart A., Hooper, R. H. and Mansfield, N. J. (2004) Effect of design changes of military load carriage systems on gait and posture : case study. In: XVth Congress of the International Society of Electrophysiology & Kinesiology, Boston, USA, 18-21 Jun 2004

Barnes, Stuart (2004) Producing people for manufacturing. In: EPSRC, IMRC Conference, Old Trafford, Manchester, 14-15 Sep 2004

Barnes, Stuart, Baker, M. and Gittens, D. (2004) Wire feed diode laser cladding of austenitic stainless steel. In: 2004 ASME International Mechanical Engineering Congress & Exposition, Anaheim, USA, 13-19 Nov 2004

Camelio, Jaime A., Hu, S. Jack and Ceglarek, Darek (2004) Impact of fixture design on sheet metal assembly variation. Journal of Manufacturing Systems, Vol.23 (No.3). pp. 182-193. doi:10.1016/S0278-6125(05)00006-3

Ceglarek, Darek, Huang, W., Zhou, S., Ding, Y., Kumar, R. and Zhou, Y. (2004) Time-based competition in multistage manufacturing : stream-of-variation analysis (SOVA) methodology—review. International Journal of Flexible Manufacturing Systems, Vol.16 (No.1). pp. 11-44. doi:10.1023/B:FLEX.0000039171.25141.a4

Ceglarek, Darek and Jin, Judy (2004) Introduction : modeling and analysis for complex production systems. Position statement. International Journal of Flexible Manufacturing Systems, Vol.16 (No.1). pp. 5-9. doi:10.1023/B:FLEX.0000039311.13861.a7

Cheng, K. P., Yip, Daniel C. Y., Lau, K. H. and Barnes, Stuart (2004) Development of a generic computer aided deductive algorithm for process parameter design. In: 8th International Conference on Knowledge-Based Intelligent Information and Engineering Systems, Wellington Inst Technol, Wellington, NEW ZEALAND, SEP, 2004. Published in: Knowledge-Based Intelligent Information and Engineering Systems, Pt 2, Proceedings, Volume 3214 pp. 28-35. ISBN 3-540-23206-0. ISSN 0302-9743.

Choy, K. L. , Lee, W. B., Lau, Henry, Lu, Dawei and Lo, Victor (2004) Design of an intelligent supplier relationship management system for new product development. International Journal of Computer Integrated Manufacturing , Vol. 17 (No. 8). pp. 692-715. doi:10.1080/0951192042000237483

Figiel, Lukasz, Kamiński, Marcin and Lauke, Bernd (2004) Analysis of a compression shear fracture test for curved interfaces in layered composites. Engineering Fracture Mechanics, Volume 71 (Number 7-8). pp. 967-980. doi:10.1016/S0013-7944(03)00158-9

Giannattasio, A., Murphy, S., Senkader, S., Falster, R. J. and Wilshaw, P. R. (2004) Impurity locking of dislocations in silicon. In: 206th Meeting of The Electrochemical Society, High Purity Silicon VIII, Honolulu, Hawaii, 3-8 Oct 2004. Published in: Proceedings of the 206th Meeting of The Electrochemical Society, High Purity Silicon VIII

Godsell, Janet, Harrison, A., Emberson, C. and Storey, J. (2004) Customer responsive supply chain strategy : an unnatural act? In: 9th Annual Logistics Research Network Conference, Dublin, Ireland. Published in: Proceedings of the 9th Annual Logistics Research Network Conference pp. 193-200.

Goodship, Vannessa (2004) Practical guide to injection moulding. Shawbury, UK: Rapra Technology. ISBN 9781859574447

Goodship, Vannessa (2004) Troubleshooting injection moulding : an Arburg guide. Rapra review reports, Volume 15 (Number 4). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574706

Goodship, Vannessa and Ogur, E. O. (2004) Polymer processing with supercritical fluids. Rapra review reports, Volume 15 (Number 8). Shawbury, UK: Rapra Technology Ltd. ISBN 9781859574942

Goodship, Vannessa and Pharaoh, M. W. (2004) An information breakdown and discussion of opportunities from the WEEE directive. International Journal of Manufacturing Technology and Management, Volume 6 (Number 1-2). pp. 1-8. doi:10.1504/IJMTM.2004.004509

Goodship, Vannessa, Stewart, R. L., Hansell, R., Ogur, E. O. and Smith, G. F. (2004) Microcellular foaming with supercritical CO2 in injection moulding. Cellular Polymers, Volume 23 (Number 1). pp. 25-37.

Huang, Wenzhen, Ceglarek, Darek and Zhou, Zhige (2004) Tolerance analysis for design of multistage manufacturing processes using number-theoretical net method (NT-net). International Journal of Flexible Manufacturing Systems, Vol.16 (No.1). pp. 65-90. doi:10.1023/B:FLEX.0000039173.07009.8a

Huang, Wenzhen, Kong, Zhenyu, Ceglarek, Darek and Brahmst, Emilio (2004) The analysis of feature-based measurement error in coordinate metrology. IIE Transactions, Vol.36 (No.3). pp. 237-251. doi:10.1080/07408170490274205

Izquierdo, E. and Chiang, Luciano E. (2004) A methodology for estimation of the specific rock energy index using corrected down-the-hole drill monitoring data. Institution of Mining and Metallurgy. Transactions. Section A: Mining Industry, Vol.113 (No.4). pp. 225-236. doi:10.1179/037178404225006218

James, C. J. and Hesse, Christian W (2004) Independent component analysis for biomedical signals. Physiological Measurement, Vol. 26 (No. 1). R15-R39. doi:10.1088/0967-3334/26/1/R02

Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. II. Effects of moulding parameters. Progress in Rubber, Plastics and Recycling Technology, Volume 21 (Number 1). pp. 27-38.

Kiatmanaroj, Subongkoj, Goodship, Vannessa and Smith, G. F. (2004) Sandwich injection moulding of thermosetting materials. Part I : initial experiments. Progress in Rubber, Plastics and Recycling Technology, Volume 20 (Number 3). pp. 171-185.

Kirwan, Kerry and Smith, Gordon (2004) Inducing directional failure in polycarbonate glazing. In: FISITA 2004 World Automotive Congress, Barcelona, Spain, 23-27 May 2004. Published in: FISITA 2004 World Automotive Congress 23-27 May, Barcelona, Spain

Kirwan, Kerry and Smith, Gordon (2004) Inducing one-way toughness in laminated polycarbonate glazing. In: Soft Extrusion Meeting 2004, Alvor, Portugal, 14-18 Oct 2004. Published in: Plastics, Rubber and Composites, Vol.33 (No.9-10). pp. 452-456. ISSN 1465-8011. doi:10.1179/174328904X48497

Lu, Dawei (2004) A fuzzy cognitive map approach for outsourcing decision making. In: EUROMA 2004 , Fontainebleau, France, 28th-30th June. Published in: Proceedings of the EUROMA 2004 pp. 393-402. ISSN 2-9522210-0-6.

Lu, Dawei, Barnes, Stuart and Minor, K. (2004) Removed and damaged area prediction in PMC laser machining using artificial neural networks. In: International Conference on the Behaviour of Materials in Machining, University of Warwick, 15th - 17th November 2004. Published in: Proceedings of the International Conference on the Behaviour of Materials in Machining pp. 290-297. (Unpublished)

Lu, Dawei and Choy, Tommy K. L. (2004) Competitive supply chain development through strategic alliance and dynamic relationship. In: 2nd International Conference of Supply Chain Management and Information System , Hong Kong, China, 6th-9th July. Published in: Proceedings of the 2nd International Conference of Supply Chain Management and Information System pp. 287-296. ISSN 962-367-386-8.

Mannar, K. and Ceglarek, Darek (2004) Continuous failure diagnosis for assembly systems using rough set approach. CIRP Annals - Manufacturing Technology, Vol.53 (No.1). pp. 39-42. doi:10.1016/S0007-8506(07)60640-4

Ng, P. T. Andy, Lu, Dawei, Li, C. K. and Chan, H. Y. Harry (2004) A strategic perspective on future residential broadband market. Technovation, Vol. 24 (No. 8). pp. 665-669. doi:10.1016/j.technovation.2004.03.005

Norwood, A. J., Dickens, P. M., Soar, R. C., Harris, R., Gibbons, Gregory John and Hansell, R. (2004) Analysis of cooling channels performance. International Journal of Computer Integrated Manufacturing , 17 (8). pp. 669-678. doi:10.1080/0951192042000237528

Payne, Sarah R. (2004) Skateboarders and the built environment : city streets or skate parks? In: Open Space : People Space, Edinburgh, UK, Oct 2004

Pinfold, Martyn Keith (2004) Using knowledge based engineering to automate the post-processing of FEA results. International Journal of Computer Applications in Technology , 21 (3). pp. 99-106. doi:10.1504/IJCAT.2004.005935

Schiller, Tara L., Sheeja, D., McKenzie, D. R., McCulloch, D. G., Lau, D. S. P., Burn, S. and Tay, B. K. (2004) Plasma immersion ion implantation of poly(tetrafluoroethylene). In: Proceedings of the 30th International Conference on Metallurgical Coatings and Thin Films. Published in: Surface and Coatings Technology, Volume 177-178 pp. 483-488. ISSN 0257-8972. doi:10.1016/S0257-8972(03)00916-2

Shpanin, L. M., Kidman, M. C., Humphries, J. E., Spencer, J. W. and Jones, G. R. (2004) The interaction of high current electric arcs with spatially varying cross magnetic fields. In: 15th International Conference on Gas Discharges and their Applications, Toulouse, France, 2004. Published in: Proceedings of the 15th International Conference on Gas Discharges and their Applications pp. 183-187.

Sundstedt, Veronica, Chalmers, Alan, Cater, |Kirsten and Debattista, Kurt (2004) Top-down visual attention for efficient rendering of task related scenes. In: VMV 2004 : 9th International Fall Workshop Vision, Modeling, and Visualization 2004, Stanford (California), USA, 16-18 Nov 2004. Published in: Vision, modeling, and visualization 2004 : proceedings, November 16-18, 2004, Standford, USA ISSN 9783898380584 .

Sundstedt, Veronica, Debattista, Kurt and Chalmers, Alan (2004) Selective rendering using task-importance maps. In: APGV 2004 :1st Symposium on Applied Perception in Graphics and Visualization, Los Angeles, California, 7-8 Aug 2004. Published in: APGV 2004 : 1st Symposium on Applied Perception in Graphics and Visualization, Los Angeles, California, August 07-08, 2004 : proceedings p. 175. ISSN 9781581139143. doi:10.1145/1012551.1012597

Takata, S., Kirnura, F., van Houten, F.J.A.M., Westkamper, E., Shpitalni, M., Ceglarek, Darek and Lee, J. (2004) Maintenance : changing role in life cycle management. CIRP Annals - Manufacturing Technology, Vol.53 (No.2). pp. 643-655. doi:10.1016/S0007-8506(07)60033-X

Vanderzalm, J. L., Schiller, Tara L., Burn, Stewart and Dillon, P. (2004) Impact of stormwater recharge on drinking water supply for Mount Gambier. In: Proceedings of international conference on water sensitive urban design, Adelaide, Australia, Nov 2004

Vanderzalm, Joanne, Schiller, Tara L., Dillon, Peter and Burn, Stewart (2004) Impact of stormwater recharge on Blue Lake, Mount Gambier's drinking water supply. In: International Conference on Water Sensitive Urban Design. Published in: Proceedings of WSUD 2004 : Cities as Catchments; International Conference on Water Sensitive Urban Design, pp. 439-450. ISBN 1876346523.

Wang, R. J., Qian, Y. Y. and Liu, Jun (2004) Structural and interfacial analysis of WC92--Co8 coating deposited on titanium alloy by electrospark deposition. Applied Surface Science, Volume 228 (Number 1-4). pp. 405-409. doi:10.1016/j.apsusc.2004.01.043

Whitty, Monica T. (2004) Cyber-flirting : an examination of men's and women's flirting behaviour both offline and on the internet. Behaviour Change, 21 (2). pp. 115-126. doi:10.1375/bech.21.2.115.55423

Whitty, Monica T. (2004) Cyberstalking. Working Paper. NSW Crime Division.

Whitty, Monica T. (2004) Peering into online bedroom windows : considering the ethical implications of investigating Internet relationships and sexuality. In: Buchanan, Elizabeth, (ed.) Readings in virtual research ethics: issues and controversies. Hershey, USA: Idea Group Inc., pp. 203-218. ISBN 9781591401520

Whitty, Monica T. (2004) Pushing the wrong buttons : men's and women's attitudes toward online and offline infidelity. CyberPsychology & Behavior, 6 (6). pp. 569-579. doi:10.1089/109493103322725342

Whitty, Monica T. (2004) Trust and risk in the workplace. Working Paper. SurfControl.

Wijeyaratne, Chandrika N., Nirantharakumar, Krishnarajah, Balen, Adam H., Barth, Julian H., Sheriff, Rezvi and Belchetz, Paul E. (2004) Plasma homocysteine in polycystic ovary syndrome : does it correlate with insulin resistance and ethnicity? Clinical Endocrinology, Volume 60 (Number 5). pp. 560-567. doi:10.1111/j.1365-2265.2004.02019.x