Journal Article

Cheung, Angus, Ip, W. H. , Lu, Dawei and Lai, C. L.. (2005) An aircraft service scheduling model using genetic algorithms. Journal of Manufacturing Technology Management, Vol.16 (No.1). pp. 109-119. ISSN 1741-038X

Cheung, Angus, Ip, W.-H. and Lu, Dawei. (2005) Expert system for aircraft maintenance services industry. Journal of Quality in Maintenance Engineering, Vol.11 (No.4). pp. 348-358. ISSN 1355-2511

Ding, Yu, Jin, J., Ceglarek, Dariusz and Shi, Jianjun. (2005) Process-oriented tolerancing for multi-station assembly systems. IIE Transactions, Vol.37 (No.6). pp. 493-508. ISSN 0740-817X

Evans-Freeman, J. H., Emiroglu, D., Vernon-Parry, K. D., Murphy, John D. and Wilshaw, P. R.. (2005) High resolution deep level transient spectroscopy applied to extended defects in silicon. Journal of Physics: Condensed Matter, Vol.17 (No.22). S2219-S2227. ISSN 0953-8984

Giannattasio, A., Murphy, John D., Senkader, S., Falster, R. J. and Wilshaw, P. R.. (2005) Oxygen and nitrogen transport in silicon investigated by dislocation locking experiments. Journal of The Electrochemical Society, Vol.152 (No.6). G460-G467. ISSN 0013-4651

Hesse, C. W. and James, C. J.. (2005) Tracking and detection of epileptiform activity in multichannel ictal EEG using signal subspace correlation of seizure source scalp topographies. Medical & Biological Engineering & Computing, Vol. 43 (No. 6). pp. 764-770. ISSN 0140-0118

Hesse, C.W. and James, C. J.. (2005) The FastICA algorithm with spatial constraints. IEEE Signal Processing Letters, Vol. 12 (No. 11). pp. 792-795. ISSN 1070-9908

Johnson, M., Tucker, N., Barnes, S. and Kirwan, Kerry. (2005) Improvement of the impact performance of a starch based biopolymer via the incorporation of Miscanthus giganteus fibres. Industrial Crops and Products, Vol.22 (No.3). pp. 175-186. ISSN 0926-6690

Kong, Zhenyu, Huang, Wenzhen and Ceglarek, Dariusz. (2005) Visibility analysis for assembly fixture calibration using screen space transformation. Journal of Manufacturing Science and Engineering, Vol.127 (No.3). pp. 622-634. ISSN 1087-1357

Li, K. H., Lee, S. F. , Li, C. K. and Lu, Dawei. (2005) Evaluation of total throughput time for an electronic production line by simulation and fuzzy pert network. Journal of Advanced Manufacturing Systems, Vol. 4 (No. 2). pp. 195-208. ISSN 02196867

Murphy, John D., Giannattasio, A., Alpass, Charles R., Senkader, Semih, Falster, Robert and Wilshaw, Peter R.. (2005) The influence of nitrogen on dislocation locking in float-zone silicon. Solid State Phenomena, Vol.108-109 . pp. 139-144. ISSN 1662-9779

Murphy, John D., Giannattasio, A., Senkader, S., Falster, R. J. and Wilshaw, P. R.. (2005) Nitrogen transport in float-zone and Czochralski silicon investigated by dislocation locking experiments. Physica Status Solidi. A: Applications and Materials Science, Vol.202 (No.5). pp. 926-930. ISSN 1862-6300

Wang, H. and Ceglarek, D.. (2005) Quality-driven sequence planning and line configuration selection for compliant structure assemblies. CIRP Annals - Manufacturing Technology, Vol.54 (No.1). pp. 31-35. ISSN 0007-8506

Book Item

Birrell, Stewart A. and Hooper, Robin H. (2005) The effect of military load carriage on ground reaction forces. In: Bust, Philip D. and McCabe, Paul T., (eds.) Contemporary Ergonomics 2005. [London] : [Loughborough]: Taylor & Francis Ltd., pp. 146-150. ISBN 9780415374484

Conference Item

Attridge, Alex, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Achieving craftsmanship targets across the UK automotive supply base, through the use of quality maturation tools and processes. In: SAE World Congress 2005, Detroit, Michigan, 11 Apr 2005. Published in: SAE Technical Paper Article no. 2005-01.

Chalmers, Alan and Debattista, Kurt (2005) Investigating the structural validity of the virtual reconstruction of prehistoric Maltese temples. In: VAST 2005 The 7th International Symposium on Virtual Reality, Pisa, Italy, 7-11 Nov 2005. Published in: VAST 2005

Cheung, A. H. W. , Lu, Dawei and Ip, W. H. (2005) An intelligent model for aircraft maintenance services. In: International Fuzzy Systems Association World Congress , Beijing, China, July 28th-31st (Unpublished)

Debattista, Kurt and Chalmers, Alan (2005) Component-based adaptive sampling. In: SIBGRAPI'05 XVIII Brazilian Symposium on Computer Graphics and Image Processing , Natal, Rio Grande do Norte, Brazil, 9-12 Oct 2005. Published in: SIBGRAPI 2005 XVIII Brazilian Symposium on Computer Graphics and Image Processing : [Natal, Rio Grande do Norte, Brazil, October 9-12, 2005 : conference proceedings] pp. 375-382.

Debattista, Kurt, Sundstedt, V., Santos, Luís Paulo and Chalmers, Alan (2005) Selective component-based rendering. In: GRAPHITE 2005, Dunedin, New Zealand, 29 Nov - 2 Dec 2005. Published in: GRAPHITE 2005 : Proceedings : Dunedin, New Zealand, November 29 - December 2, 2005 pp. 13-22.

Debattista, Kurt, Sundstedt, Veronica, Pereira, Francisco and Chalmers, Alan (2005) Selective parallel rendering for high-fidelity graphics. In: Theory and Practice of Computer Graphics 2005, Canterbury, UK, 15-17 Jun 2005. Published in: Theory and practice of computer graphics 2005 : Eurographics UK chapter proceedings University of Kent, Canterbury, United Kingdom 15th to 17th June 2005 pp. 59-66.

Gillibrand, Richard, Debattista, Kurt and Chalmers, Alan (2005) Cost prediction maps for global illumination. In: Theory and Practice of Computer Graphics 2005, Canterbury, UK, 15-17 Jun 2005. Published in: Theory and practice of computer graphics 2005 : Eurographics UK chapter proceedings University of Kent, Canterbury, United Kingdom 15th to 17th June 2005 pp. 97-104.

Kirwan, Kerry and Smith, Gordon (2005) Inducing directional failure in polycarbonate glazing. In: Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment , University of Warwick, Coventry, UK., 7 - 8 Dec 2005. Published in: Proceedings of the Sixth International Conference on Materials for Lean Weight Vehicles : technologies for performance, efficiency and the environment ; 7 - 8 December 2005 ; held at International Manufacturing Centre, University of Warwick, Coventry, UK

Kirwan, Kerry, Tucker, N., Johnson, M. and Jacobs, D. (2005) Creation of a controlled advanced biodegradable composite system. In: SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Portland, Oregon, USA, 7-9 Jun 2005 . Published in: Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental & Applied Mechanics June 7-9, 2005, Portland, Oregon, USA

Longhurst, Peter, Debattista, Kurt and Chalmers, Alan (2005) Snapshot : a rapid technique for driving a selective global illumination renderer. In: WSCG 2005 The 13th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision'2005, Plzen - Bory, Czech Republic, 31 Jan-4 Feb 2005. Published in: WSCG '2005 : the 13-th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision 2005 in co-operation with Eurographics

Longhurst, Peter, Debattista, Kurt, Gillibrand, Richard and Chalmers, Alan (2005) Analytic antialiasing for selective high fidelity rendering. In: SIBGRAPI'05 XVIII Brazilian Symposium on Computer Graphics and Image Processing , Natal, Rio Grande do Norte, Brazil, 9-12 Oct 2005. Published in: SIBGRAPI 2005 XVIII Brazilian Symposium on Computer Graphics and Image Processing : [Natal, Rio Grande do Norte, Brazil, October 9-12, 2005 : conference proceedings] pp. 359-366.

Marco, James, Vaughan, N. D., Spowers, H. and McCulloch, M. (2005) The importance of whole system design to the viability of fuel cell vehicles. In: 6th International Conference on Materials for Lean Weight Vehicles, University of Warwick, UK, 7-8 December 2005. Published in: Proceedings of the 6th International Conference on Materials for Lean Weight Vehicles

Mastoropoulou, Georgia, Debattista, Kurt, Chalmers, Alan and Troscianco, Tom (2005) The influence of sound effects on the perceived smoothness of rendered animations. In: APGV 05: Second Symposium on Applied Perception in Graphics and Visualization, A Coruña, Spain, 26-28 Aug 2005. Published in: Proceedings, APGV 2005 : 2nd Symposium on Applied Perception in Graphics and Visualization : A Coroña [i.e. A Coruña], Spain, August 26-28, 2005 pp. 9-15.

Mastoropoulou, Georgia, Debattista, Kurt, Chalmers, Alan and Troscianko, Tom (2005) Auditory bias of visual attention for perceptually-guided selective rendering of animations. In: GRAPHITE 2005, Dunedin, New Zealand, 29 Nov - 2 Dec 2005. Published in: GRAPHITE 2005 : Proceedings : Dunedin, New Zealand, November 29 - December 2, 2005

Radford, James, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Improving communication of design target requirements to facilitated enhanced craftsmanship delivery. In: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy, Melbourne, Australia, Aug 2005. Published in: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy pp. 89-90.

Scotland, Robert, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Communication of craftsmanship targets to the supply base. In: IEEE International Engineering Management Conference, St Johns, Canada, 11-13 Sep 2005. Published in: 2005 IEEE International Engineering Management Conference, Vols 1 and 2 pp. 12-15.

Sundstedt, V., Debattista, Kurt, Longhurst, Peter, Chalmers, Alan and Troscianko, Tom (2005) Visual attention for efficient high-fidelity graphics. In: SCCG 2005 Spring Conference in Computer Graphics, Budmerice Castle, Slovakia, 12-14 May 2005. Published in: Proceedings of the 21st spring conference on Computer graphics pp. 169-175.

Sundstedt, Veronica, Debattista, Kurt and Chalmers, Alan (2005) Perceived aliasing thresholds in high-fidelity rendering. In: APGV 05: Second Symposium on Applied Perception in Graphics and Visualization, A Coroña, Spain, 26-28 Aug 2005. Published in: Proceedings, APGV 2005 : 2nd Symposium on Applied Perception in Graphics and Visualization : A Coroña [i.e. A Coruña], Spain, August 26-28, 2005 p. 166.

Tucker, N., Johnson, M., Dargue, I., Kirwan, Kerry, Jacobs, D., Smith, Gordon and Pink, David (2005) 60 solvent compounding of natural fibre reinforced polymer composite systems. In: SEM Annual Conference & Exposition on Experimental and Applied Mechanics, Portland, Oregon, USA, 7-9 Jun 2005 . Published in: Proceedings of the 2005 SEM Annual Conference & Exposition on Experimental & Applied Mechanics June 7-9, 2005, Portland, Oregon, USA

Turley, G. A., Williams, M. A. (Mark A.) and Tennant, Charles (2005) Expanding product audit methodology throughout the automotive supply chain to facilitate improvement in craftsmanship during new product introduction. In: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy, Melbourne, Australia, Aug 2005. Published in: ICED 05: 15th International Conference on Engineering Design: Engineering Design and the Global Economy pp. 87-88.

Journal Item

Styger, L. and Kirwan, Kerry (2005) Cross sectorial technology transfer of 5-axis machining protocols into toolmaking for the injection moulding of nano-coated polymer glazing for the automotive sector. Foundry Trade Journal International, Vol.179 (No.3624). pp. 123-126. ISSN 1758-9789

Report

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Tactility, craftsmanship and the NPI process. SAE International. (SAE Technical Papers.