Journal Article

Attwells, Renee L., Birrell, Stewart A., Hooper, Robin H. and Mansfield, Neil J.. (2006) Influence of carrying heavy loads on soldiers' posture, movements and gait. Ergonomics, Vol.49 (No.14). pp. 1527-1537. ISSN 0014-0139

Barnes, Tina Angela, Pashby, I. R. and Gibbons, A.M.. (2006) Managing collaborative R&D projects development of a practical management tool. International Journal of Project Management, Vol.24 (No.5). pp. 395-404. ISSN 0263-7863

Chen, Y., Ding, Y., Jin, J. and Ceglarek, D.. (2006) Integration of process-oriented tolerancing and maintenance planning in design of multistation manufacturing processes. IEEE Transactions on Automation Science and Engineering, Vol.3 (No.4). pp. 440-453. ISSN 1545-5955

Conti, Robert, Angelis, Jannis, Cooper, Cary, Faragher, Brian and Gill, Colin. (2006) The effects of lean production on worker job stress. International Journal of Operations & Production Management, Volume 26 (Number 9-10). pp. 1013-1038. ISSN 0144-3577

Emberson, Caroline, Storey, John, Godsell, Janet and Harrison, Alan. (2006) Managing the supply chain using in-store supplier employed merchandisers. International Journal of Retail & Distribution Management, volume 34 (Number 6). pp. 467-481. ISSN 0959-0552

Gibbons, Gregory John and Hansell, Robert George. (2006) Down-selection and optimization of thermal-sprayed coatings for aluminum mould tool protection and upgrade. Journal of Thermal Spray Technology, Volume 15 (Number 3). pp. 340-347. ISSN 1059-9630

Godsell, Janet, Harrison, Alan, Emberson, Caroline and Storey, John. (2006) Customer responsive supply chain strategy : an unnatural act? International Journal of Logistics, Volume 9 (Number 1). pp. 47-56. ISSN 1367-5567

Goodship, V., Lobjoit, C., Cook, N. and Smith, G. F.. (2006) In-mould painting by spraying thermoset powder coating into a closed mould, followed by standard thermoplastic injection moulding : part 1 : introducing the in-spire process. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 3). pp. 165-177. ISSN 1477-7606

Han, L., Chrysanthou, A., Young, Ken and O'Sullivan, J. M.. (2006) Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. Fatigue & Fracture of Engineering Materials & Structures, Vol.29 (No.8). pp. 646-654. ISSN 8756-758X

Hesse, Christian W. and James, C. J.. (2006) On Semi-Blind Source Separation Using Spatial Constraints With Applications in EEG Analysis. IEEE Transactions on Biomedical Engineering, Vol. 53 (No. 12). pp. 2525-2534. ISSN 0018-9294

James, C. J., Gibson, Oliver and Davies, Mike. (2006) On the analysis of single versus multiple channels of electromagnetic brain signals. Artificial Intelligence in Medicine, Vol. 37 (No. 2). pp. 131-143. ISSN 09333657

Jüttner, Uta, Godsell, Janet and Christopher, Martin G.. (2006) Demand chain alignment competence : delivering value through product life cycle management. Industrial Marketing Management, Volume 35 (Number 8). pp. 989-1001. ISSN 0019-8501

Kawalec, Andrzej, Wiktor, Jerzy and Ceglarek, Dariusz. (2006) Comparative analysis of tooth-root strength using ISO and AGMA standards in spur and helical gears with FEM-based verification. Journal of Mechanical Design, Vol.128 (No.5). p. 1141. ISSN 1050-0472

Kim, D., Bufardi, A. and Xirouchakis, P.. (2006) Compatibility measurement in collaborative conceptual design. CIRP Annals - Manufacturing Technology, Vol.55 (No.1). pp. 151-154. ISSN 0007-8506

Kong, Zhenyu and Ceglarek, Dariusz. (2006) Fixture workspace synthesis for reconfigurable assembly using procrustes-based pairwise configuration optimization. Journal of Manufacturing Systems, Vol.25 (No.1). pp. 25-38. ISSN 0278-6125

Lee, Neville K. S., Yu, Grace, Joneja, Ajay and Ceglarek, Dariusz. (2006) The modeling and analysis of a butting assembly in the presence of workpiece surface roughness and part dimensional error. International Journal of Advanced Manufacturing Technology, Vol.31 (No.5-6). pp. 528-538. ISSN 0268-3768

Makenji, K., Goodship, V., Buckley, S. and Evered, C.. (2006) A new in-mould decoration process using real wood veneer. Progress in Rubber, Plastics and Recycling Technology, Volume 22 (Number 4). pp. 225-242. ISSN 1477-7606

Mannar, K., Ceglarek, D., Niu, F. and Abifaraj, B.. (2006) Fault region localization : product and process improvement based on field performance and manufacturing measurements. IEEE Transactions on Automation Science and Engineering, Vol.3 (No.4). pp. 423-439. ISSN 1545-5955

Mumford, Jeanette A. and Nichols, Thomas E.. (2006) Modeling and inference of multisubject fMRI data. IEEE Engineering in Medicine and Biology Magazine, Vol.25 (No.2). pp. 42-51. ISSN 0739-5175

Murphy, John D., Alpass, C. R., Giannattasio, A., Senkader, S., Falster, R. J. and Wilshaw, P. R.. (2006) Nitrogen in silicon : transport and mechanical properties. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol.253 (No.1-2). pp. 113-117. ISSN 0168-583X

Murphy, John D., Senkader, S., Falster, R. J. and Wilshaw, P. R.. (2006) Oxygen transport in Czochralski silicon investigated by dislocation locking experiments. Materials Science and Engineering : B, Vol.134 (No.2-3). pp. 176-184. ISSN 0921-5107

Murphy, John D., Wilshaw, P. R., Pygall, B. C., Senkader, S. and Falster, R. J.. (2006) Enhanced oxygen diffusion in highly doped p-type Czochralski silicon. Journal of Applied Physics, Vol.100 (No.10). Article no.103531. ISSN 0021-8979

Ng, P. T. Andy, Lu, Dawei, Li, C. K. and Chan, H. Y. Harry. (2006) A new value chain model for the evolution of broadband application market. International Journal of Technology Intelligence and Planning, Vol. 2 (No. 1). p. 46. ISSN 1740-2832

Pickin, C. G. and Young, Ken. (2006) Evaluation of cold metal transfer (CMT) process for welding aluminium alloy. Science and Technology of Welding and Joining, volume 11 (Number 5). pp. 583-585. ISSN 1362-1718

Storey, John, Emberson, Caroline, Godsell, Janet and Harrison, Alan. (2006) Supply chain management : theory, practice and future challenges. International Journal of Operations & Production Management, Volume 26 (Number 7). pp. 754-774. ISSN 0144-3577

Styger, L. and Kirwan, Kerry. (2006) Toolmaking for injection moulding. Engineering Designer . pp. 14-19. ISSN 0013-7898

Conference Item

Antory, David, Kruger, Uwe and Littler, Tim (2006) A new principal curve algorithm for nonlinear principal component analysis. In: International Conference on Intelligent Computing (ICIC), Kunming, China, 6-19 Aug 2006. Published in: Lecture Notes in Computer Science, Volume 4113 pp. 1235-1246.

Aranha, Matt, Debattista, Kurt, Chalmers, Alan and Hill, Steve (2006) Perceived rendering thresholds for high-fidelity graphics on small screen devices. In: Theory and Practice of Computer Graphics 2006, Middlesbrough, UK, 20-22 Jun 2006. Published in: Theory and practice of computer graphics 2006 : Eurographics UK chapter proceedings : University of Teesside, Middlesbrough, United Kingdom 20th - 22nd June 2006 pp. 133-140.

Banterle, Francesco, Ledda, Patrick, Debattista, Kurt and Chalmers, Alan (2006) Inverse tone mapping. In: GRAPHITE 2006, Kuala Lumpur, Malaysia, 29 Nov - 2 Dec 2006. Published in: Proceedings of the 4th nternational Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia Kuala Lumpur (Malasia), November 29-December 2, 2006 pp. 349-356.

Birrell, Stewart A. and Haslam, Roger A. (2006) The effect of rifle carriage on ground reaction force parameters. In: 2nd Annual Injury Biomechanics Symposium, Columbus, USA, 17-19 May 2006

Breddy, J. A., Jennings, P. A., Carter, S., Picarelli, A., Walker, A., McGordon, Andrew and Vinsome, A. (2006) Cost benefit analysis for the development of hybrid electric vehicles. In: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exposition, Yokohama, Japan, 23-28 Oct 2006 pp. 731-741.

Cacciatori, E., Vaughan, N. D. and Marco, James (2006) Energy management strategies for a parallel hybrid electric powertrain : fuel economy optimisation with driveability requirements. In: PARD Hybrid Electric Vehicle Conference, Coventry, 12-13 Dec 2006. Published in: IEE Conference Publication Series pp. 157-172.

Chalmers, Alan, Debattista, Kurt, Sundstedt, V., Longhurst, P. and Gillibrand, R. (2006) Rendering on demand. In: EGPGV2006 - 6th Eurographics Symposium on Parallel Graphics Visualization, Braga, Portugal, 11-12 May 2006. Published in: EG PGV 2006 : 6th Eurographics Symposium on Parallel Graphics and Visualization : Braga, Portugal, May 11th - 12th, 2006 pp. 9-17.

Chalmers, Alan, Debattista, Kurt and dos Santos, Luis Paulo (2006) Selective rendering : computing only what you see. In: GRAPHITE 2006, Kuala Lumpur, Malaysia, 29 Nov - 2 Dec 2006. Published in: Proceedings of the 4th nternational Conference on Computer Graphics and Interactive Techniques in Australasia and South East Asia Kuala Lumpur (Malasia), November 29-December 2, 2006 pp. 9-18.

Debattista, Kurt, Santos, Luís Paulo and Chalmers, Alan (2006) Accelerating the irradiance cache through parallel component-based rendering. In: EGPGV2006 - 6th Eurographics Symposium on Parallel Graphics Visualization, Braga, Portugal, 11-12 May 2006. Published in: EG PGV 2006 : 6th Eurographics Symposium on Parallel Graphics and Visualization : Braga, Portugal, May 11th - 12th, 2006 pp. 27-34.

Ellis, G., Chalmers, Alan and Debattista, Kurt (2006) The effect of rotational ego-motion on the perception of high fidelity animations. In: APGV '06 , Boston, Massachusetts, 28-29 Jul 2006. Published in: Proceedings, APGV 2006 : Symposium on Applied Perception in Graphics and Visualization : Boston, Massachusetts, July 28-29, 2006 p. 160.

Gillibrand, Richard, Longhurst, Peter, Debattista, Kurt and Chalmers, Alan (2006) Cost prediction for global illumination using a fast rasterised scene preview. In: AFRIGRAPH 2006, Cape Town, South Africa, 25-27 Jan 2006. Published in: Proceedings, AFRIGRAPH 2006 4th International Conference on Virtual Reality, Computer Graphics, Visualisation and Interaction in Africa : Cape Town, South Africa, January 25-27, 2006 pp. 41-48.

Gopi, E.S., Rozario, Sylvester V., Rangarajan, Vasudha and Nataraj, Lakshmanan (2006) Brain computer interface analysis using wavelet transforms and auto regressive coefficients. In: International Conference on Electrical and Computer Engineering, 2006. ICECE '06. , Dhaka, 19-21 Dec 2006 pp. 169-172.

Kong, Z., Kumar, R., Gogineni, S., Zhou, Y. and Ceglarek, Dariusz (2006) Stream of variation analysis for multiple station assembly process with consideration of various tolerance modes. In: 34th North American Manufacturing Research Conference (NAMRC), Marquette University, Milwaukee, Wisconsin, USA., May 2006. Published in: Transactions of the North American Manufacturing Research Conference, Vol.34 pp. 469-476.

Longhurst, Peter, Debattista, Kurt and Chalmers, Alan (2006) A GPU based saliency map for high-fidelity selective rendering. In: AFRIGRAPH 2006, Cape Town, South Africa, 25-27 Jan 2006. Published in: Proceedings, AFRIGRAPH 2006 4th International Conference on Virtual Reality, Computer Graphics, Visualisation and Interaction in Africa : Cape Town, South Africa, January 25-27, 2006 pp. 21-29.

Lu, Dawei, Tennant, C. and Curtis, Tony (Anthony) (2006) A Case Study of Dynamic Supply Chain Development. In: 15th Annual IPSERA Conference , San Diego University, San Diego, USA, 5th-8th April (Unpublished)

Marco, James and Vaughan, N. D. (2006) Improving the commercial viability of fuel cell vehicles through the application of integrated whole vehicle control. In: FISITA 2006 31st World Automotive Congress, Yokohama, Japan, 22-27 October 2006

McGordon, Andrew, Walker, A., Vinsome, A. and Jennings, P. A. (2006) A detailed approach to electric drive rating for hybrid vehicle architectures using operating duty from prescribed drive cycles. In: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exposition, Yokohama, Japan, 23-28 Oct 2006 pp. 645-656.

Moreno, R., Marco, James, Vaughan, N. D. and Kellaway, M. (2006) In vehicle testing of a 42V lead acid battery management system for hybrid electric vehicles. In: 10th European Lead Acid Battery Conference, Athens, Greece, 26-29 September 2006. Published in: Proceedings of the 10th European Lead Acid Battery Conference

Murphy, John D., Alpass, Charles R., Giannattasio, Armando, Senkader, Semih, Emiroglu, Deniz, Evans-Freeman, Jan H., Falster, R. J. and Wilshaw, Peter R. (2006) Nitrogen-doped silicon : mechanical, transport and electrical properties. In: 210th ECS Meeting, Cancun, Mexico, 29 Oct - 3 Nov 2006. Published in: ECS Transactions, Vol.3 (No.4). pp. 239-253.

Prakash, , Ceglarek, Dariusz and Tiwari, M. K. (2006) Fault failure diagnosis for compliant assembly structures using statistical modal analysis. In: ASME 2006 International Manufacturing Science and Engineering Conference (MSEC2006) , Ypsilanti, Michigan, USA, 8–11 Oct 2006. Published in: Manufacturing Science and Engineering, Parts A and B, 2006 pp. 731-742.

Shpanin, L. M., Humphries, J. E., Spencer, J. W., Jones, G. R. and Turner, D. R. (2006) The use of spatially distributed magnetic fields for arc control and current interruption at atmospheric pressure. In: 16th International Conference on Gas Discharges and their Applications, Xi’an Jiatong University, 2006. Published in: Proceedings of 16th International Conference on Gas Discharges and their Applications pp. 41-44.

Shpanin, L. M., Turner, D. R., Humphries, J. E., Spencer, J. W., Jones, G. R. and Djakov, B. E. (2006) Formation and propulsion of an atmospheric pressure plasma ring. In: 16th International Conference on Gas Discharges and their Applications, Xi’an Jiatong University, 2006. Published in: Proceedings of 16th International Conference on Gas Discharges and their Applications pp. 5-8.

Walker, A., McGordon, Andrew, Breddy, J., Vinsome, A., Jennings, P. A. and Willows, M. (2006) Cost functions applied to H.E.V. powertrain control. In: 22nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exposition, Yokohama, Japan, 23-28 Oct 2006 pp. 1456-1465.

Wong, C. and Godsell, Janet (2006) Configuring supply chains to deliver customer and shareholder value. In: Logistics Research Network Annual Conference, Plymouth, UK

Wood, P. K. C., Schley, C. A., McGregor, I., Dutton, T., Bloomfield, M. and Bardenheier, R. (2006) Characterising performance of automotive materials at high strain rate for improved crash design. In: 8th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Dijon, France, 11-15 Sep 2006. Published in: Journal de Physique IV. Proceedings, Volume 134 pp. 1167-1174.

Yang, Xiaouhui, Debattista, Kurt and Chalmers, Alan (2006) Structured image techniques for efficient high-fidelity. In: Theory and Practice of Computer Graphics 2006, Middlesbrough, UK, 20-22 Jun 2006. Published in: Theory and practice of computer graphics 2006 : Eurographics UK chapter proceedings : University of Teesside, Middlesbrough, United Kingdom 20th - 22nd June 2006 pp. 149-156.

Ye, Jilin, Shulgin, Boris V. and Raja, Vinesh (2006) Virtual reality in construction industry : a requirement compatibility analysis approach - art. no. 60551S. In: Conference on Stereoscopic Displays and Virtual Reality Systems XIII, San Jose, CA, 16-19 Jan 2006. Published in: Stereoscopic Displays and Virtual Reality Systems XIII, Volume 6055 S551-S551.

Zhou, Wei, Raja, Vinesh, Meinel, Christoph and Ahmad, Munir (2006) Label-based access control policy enforcement and management. In: 7th ACIS International Conference on Software Engineering, Artificial Intelligence, Networking, and Parallel and Distributed Computing/7th ACIS International Workshop on Self-Assembling Networks, Las Vegas, NV, 19-20 Jun 2006. Published in: SNPD 2006: Seventh ACIS International Conference on Software Engineering Artificial Intelligence, Networking, and Parallel/Distributed Computing, Proceedings pp. 395-400.

News Item

Young, Ken and Tuersley, I. (2006) UK robotic installations statistics for 2005. Industrial Robot: An International Journal, Volume 33 (Number 6). pp. 418-421. ISSN 0143-991X