Journal Article

Almazán, José L., De la Llera, Juan C., Inaudi, José A., López-García, Diego and Izquierdo, E.. (2007) A bidirectional and homogeneous tuned mass damper : a new device for passive control of vibrations. Engineering Structures, Vol.29 (No.7). pp. 1548-1560. ISSN 0141-0296

Alpass, C. R., Murphy, John D., Giannattasio, A., Senkader, S., Falster, R. J. and Wilshaw, P. R.. (2007) Out-diffusion of nitrogen from float-zone silicon measured by dislocation locking. Physica Status Solidi. A: Applications and Materials Science, Vol.204 (No.7). pp. 2256-2260. ISSN 1862-6300

Anderson, A. H., McEwan, R., Bal, J. and Carletta, J.. (2007) Virtual team meetings: an analysis of communication and context. Computers in Human Behavior, Vol.23 (No.5). pp. 2558-2580. ISSN 0747-5632

Antory, David. (2007) Application of a data-driven monitoring technique to diagnose air leaks in an automotive diesel engine: ada case study. Mechanical Systems and Signal Processing, Vol.21 (No.2). pp. 795-808. ISSN 0888-3270

Attridge, Alex, Williams, M. A. (Mark A.) and Tennant, Charles. (2007) The role of physical modelling in the design verification stage of the automotive NPI process in the premium sector. International Journal of Automotive Technology and Management, 7 (1). pp. 32-54. ISSN 1470-9511

Banterle, Francesco, Ledda, Patrick, Debattista, Kurt, Chalmers, Alan and Bloj, Marina. (2007) A framework for inverse tone mapping. Visual Computer, Vol.23 (No.7). pp. 467-478. ISSN 0178-2789

Barwick, Lisa and Kelly, Toni. (2007) Investing in a new way of learning. SCONUL Focus, Vol.40 . pp. 46-47. ISSN 1745-5782

Birrell, Stewart A. and Hooper, Robin H.. (2007) Initial subjective load carriage injury data collected by interviews and questionnaires. Mililtary Medicine, Volume 172 (Number 3). pp. 306-311. ISSN 0026-4075

Birrell, Stewart A., Hooper, Robin H. and Haslam, Roger. (2007) The effect of military load carriage on ground reaction forces. Gait & Posture, Volume 26 (Number 4). pp. 611-614. ISSN 0966-6362

Chalmers, Alan, Debattista, Kurt, Mastoropoulou, Georgia and Paulo dos Santos, Luis. (2007) There-reality : selective rendering in high fidelity virtual environments. The International Journal of Virtual Reality, Vol.6 (No.1). pp. 1-10. ISSN 1081-1451

Davies, M.E. and James, C. J.. (2007) Source separation using single channel ICA. Signal Processing, Vol. 87 (No. 8). pp. 1819-1832. ISSN 01651684

Debattista, Kurt, Chalmers, Alan, Gillibrand, R., LonghurSt, P., Mastoropouiou, G. and Sundstedt, V.. (2007) Parallel selective rendering of high-fidelity virtual environments. Parallel Computing, Vol.33 (No.6). pp. 361-376. ISSN 0167-8191

Demanuele, Charmaine, James, C. J. and Sonuga-Barke, Edmund JS. (2007) Distinguishing low frequency oscillations within the 1/f spectral behaviour of electromagnetic brain signals. Behavioral and Brain Functions, Vol. 3 (No. 1). p. 62. ISSN 1744-9081

Djakov, B. E., Shpanin, L. M., Spencer, J. W. and Jones, G. R.. (2007) Propulsion of a plasma ring in a rotary arc device at atmospheric pressure. Journal of Theoretical and Applied Mechanics, Volume 37 (Number 1). pp. 39-54. ISSN 0861-6663

Eremiáš, B., Převorovský, D., Janik, Vit and Faltus, J.. (2007) Chemical composition of new copper alloys for machining and its effect on their susceptibility to corrosion cracking. Materials and Corrosion, Vol.58 (No.9). pp. 681-686. ISSN 0947-5117

Flower, J. O. and Hodge, C. G.. (2007) Stability and transient-behavioural assessment of power-electronics based dc-distribution systems. Part 2: The frequency response approach. Journal of Marine Engineering and Technology, Vol.2007 (No.A9). pp. 19-28. ISSN 1476-1548

Goodship, V.. (2007) Plastic recycling. Science Progress, Volume 90 (Number 4). pp. 245-268. ISSN 0036-8504

Goodship, V., Cook, N., Dargue, I., Lobjoit, C., Makenji, Kylash and Smith, G. F.. (2007) In mould painting using thermoset powder coating and thermoplastic substrate in closed tool injection moulding. Plastics, Rubber and Composites, Vol.36 (No.1). pp. 34-41. ISSN 1465-8011

Gott, Andrew L., Coles, Stuart R., Clarke, Adam J., Clarkson, Guy J. and Scott, Peter, P.. (2007) Chiral alkoxide-functionalized guanidinates from ring-opening rearrangement of aminooxazolinate complexes. Organometallics, Vol.26 (No.1). pp. 136-142. ISSN 0276-7333

Hill, J. F., Morris, C. and Gabriel, R.. (2007) An approach to the dynamic detection of outliers in electronics production. International Journal of Production Research , Vol.45 (No.3). pp. 765-778. ISSN 0020-7543

Huang, Wenzhen, Lin, Jijun, Bezdecny, Michelle, Kong, Zhenyu and Ceglarek, Dariusz. (2007) Stream-of-variation modeling—part I : a generic three-dimensional variation model for rigid-body assembly in single station assembly processes. Journal of Manufacturing Science and Engineering, Vol.129 (No.4). pp. 821-831. ISSN 1087-1357

Huang, Wenzhen, Lin, Jijun, Kong, Zhenyu and Ceglarek, Dariusz. (2007) Stream-of-variation (SOVA) modeling—part II : a generic 3D variation model for rigid body assembly in multistation assembly processes. Journal of Manufacturing Science and Engineering, Vol.129 (No.4). pp. 832-842. ISSN 1087-1357

Izquierdo, L. E., Shi, J., Hu, S. J. and Wampler, C. W.. (2007) Feedforward control of multistage assembly processes using programmable tooling. Transactions of the North American Manufacturing Research Conference, Vol.35 . pp. 295-302. ISSN 1047-3025

Kirwan, Kerry, Johnson, R. M., Jacobs, D. K., Smith, G. F., Shepherd, L. and Tucker, N.. (2007) Enhancing properties of dissolution compounded Miscanthus giganteus reinforced polymer composite systems: Part 1. Improving flexural rigidity. Industrial Crops and Products, Vol.26 (No.1). pp. 14-27. ISSN 0926-6690

Kirwan, Kerry and Taylor, A.. (2007) Improving environmental performance of polymer glazing through novel material hybrids. Plastics, Rubber and Composites, Vol.36 (No.2). pp. 85-90. ISSN 1465-8011

Loose, Jean-Philippe, Zhou, Shiyu and Ceglarek, Dariusz. (2007) Kinematic analysis of dimensional variation propagation for multistage machining processes with general fixture layouts. IEEE Transactions on Automation Science and Engineering, Vol.4 (No.2). pp. 141-152. ISSN 1545-5955

Makenji, K., Goodship, V., Fanning, R. and Buckley, S.. (2007) Analysis of back injecting real wood veneers using engineering polymers in an injection moulding process. Progress in Rubber, Plastics and Recycling Technology, Volume 23 (Number 2). pp. 83-95. ISSN 1477-7606

Marco, James and Vaughan, Nicholas D.. (2007) The control-oriented design and simulation of a high voltage bus management strategy for use within hybrid electric vehicles. International Journal of Vehicle Systems Modelling and Testing, Vol.2 (No.4). pp. 345-368. ISSN 1745-6436

McCulloch, M., Spowers, H., Vaughan, Nicholas D. and Marco, James. (2007) Modelling the acceleration and braking characteristics of a fuel-cell electric sports vehicle equipped with an ultracapacitor. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.221 (No.1). pp. 67-81. ISSN 0954-4070

Warwick Mfg Grp (Including: Phoomboplab, T. and Ceglarek, D.). (2007) Design synthesis framework for dimensional management in multistage assembly system. CIRP Annals - Manufacturing Technology, Vol.56 (No.1). pp. 153-158. ISSN 0007-8506

Poldrack, Russell A., Fletcher, Paul C., Henson, Richard N., Worsley, Keith J., Brett, M. (Matthew) and Nichols, Thomas E.. (2007) Guidelines for reporting an fMRI study. NeuroImage, Vol.40 (No.2). pp. 409-414. ISSN 1053-8119

Ruppertsberg, Alexa I., Bloj, Marina, Banterle, Francesco and Chalmers, Alan. (2007) Displaying colourimetrically calibrated images on a high dynamic range display. Journal of Visual Communication and Image Representation, Vol.18 (No.5). pp. 429-438. ISSN 1047-3203

Shepherd, Philip, Mallick, Kajal K. and Green, Roger J.. (2007) Dielectric properties of cobalt substituted M-type barium hexaferrite prepared by co-precipitation. Journal of Materials Science: Materials in Electronics, Vol.18 (No.5). pp. 527-534. ISSN 0957-4522

Turley, G. A., Williams, M. A. (Mark A.) and Tennant, Charles. (2007) Final vehicle product audit methodologies within the automotive industry. International Journal of Productivity and Quality Management, 2 (1). pp. 1-22. ISSN 1746-6482

Wang, Suogang and James, C. J.. (2007) Extracting Rhythmic Brain Activity for Brain-Computer Interfacing through Constrained Independent Component Analysis. Computational Intelligence and Neuroscience, 2007 . pp. 1-9. ISSN 1687-5265

Williams, M. A. (Mark A.), Kochhar, A. K. and Tennant, C.. (2007) An object-oriented reference model of the fuzzy front end of the new product introduction process. International Journal of Advanced Manufacturing Technology, Vol.34 (No.7-8). pp. 826-841. ISSN 0268-3768

Book Item

Jones, Jeffrey Alun, 1962- (2007) Discrete event simulation for reliability prediction. In: Ruggeri, Fabrizio and Kenett, Ron and Faltin, Frederick W., (eds.) Encyclopedia of statistics in quality and reliability. Chichester: John Wiley. ISBN 9780470018613

Conference Item

Aranha, Matt, Dubla, Piotr, Debattista, Kurt, Bashford-Rogers, Thomas and Chalmers, Alan (2007) A physically-based client-server rendering solution for mobile devices. In: MUM07 6th International Conference on Mobile and Ubiquitous Multimedia, Oulu, Finland, 12-14 Dec 2007. Published in: Proceedings of the 6th International Conference on Mobile and Ubiquitous Multimedia 2007, Oulu, Finland, December 12-14, 2007 pp. 149-154.

Chalmers, Alan, Williams, M. A. (Mark A.), Artusi, Alessandro, Attridge, Alex, Debbattista, K. and Banterle, Francesco (2007) High dynamic range imagery. In: Royal Photographic Society – Image Science Group: Digital Futures 2007, Royal Institute of British Architects, London, UK, 30th October 2007

Copper, A., Kellaway, M., Bonnet, B., Marco, James and Vaughan, N. D. (2007) The demonstration of new generation lead-acid batteries in hybrid electric vehicles. In: 2nd European Electric Drive Conference, EET-2007, Brussels, Belgium, 30 May-1 June 2007

Hasic, Jasminka, Chalmers, Alan, Debattista, Kurt and Mastoropoulou, Georgia (2007) Movement bias in visual attention for perceptually-guided selective rendering of animations. In: Spring Conference on Computer Graphics (SCCG) 2007, Budmerice Castle, Slovakia, 26-28 Apr 2007. Published in: Spring conference on computer graphics SCCG 2007 in cooperation with Eurographics, Budmerice, April 26.-28.,2007 : conference proceedings

Lu, Dawei and Tennent, C. (2007) Investigating the purchasing behaviour of a project based manufacturer. In: 16th Annual IPSERA Conference , Bath, UK, 1st-4th April (Unpublished)

Marco, James (2007) The use of model based design techniques in the design of hybrid electric vehicles. In: 3rd Institution of Engineering and Technology Conference on Automotive Electronics, 2007 , Warwick, UK, 28-29 June 2007. Published in: IEE Conference Publication Series pp. 1-10.

Marco, James and Vaughan, Nicholas D. (2007) Defining performance metrics for hybrid electric vehicles. In: SAE World Congress & Exhibition, Detroit, Michigan, United States, 16 April 2007. Published in: Society of Automotive Engineers Technical Paper Series

Payne, Sarah R., Devine-Wright, Patrick and Irvine, Katherine N. (2007) People's perceptions and classifications of sounds heard in urban parks : semantics, affect and restoration. In: Inter-Noise 07:36th International Congress and Exhibition on Noise Control Engineering, Istanbul, Turkey, 28-31 Aug 2007. Published in: Proceedings of Inter-Noise 2007

Thornby, John Albert, 1982- (2007) Development of a novel charge spectrometer. In: IoP Nuclear and Particle Physic Divisional Conference, University of Surrey, 2-5 April 2007

Thornby, John Albert, 1982- (2007) A novel approach to direct neutrino mass measurement. In: UK GRAD Student Conference, University of Warwick

Verhaeghe, Ing G. and Barnes, Stuart (2007) Low-porosity laser welding of 12.7mm thickness aerospace aluminium. In: INALCO 2007, Tokyo, Japan, 24-26 Oct. 2007, Tokyo, Japan, 24-26 Oct 2007. Published in: Proceedings of INALCO 2007

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew (2007) The customer, automotive switch-feel, and the New Product Introduction process. In: 7th Pangborn Sensory Science Symposium, Minneapolis, MN, USA, August 12–16, 2007

Book

Goodship, V. (2007) Introduction to plastics recycling. Shawbury, UK: Smithers Rapra. ISBN 9781847350787

Report

Harrison, Alan, Godsell, Janet, Skipworth, Heather, Wong, Yew Wong and Achimugu, Nemile (2007) Developing supply chain strategy : balancing shareholder and customer value. Cranfield University, UK: Supply chain research centre, Cranfield SOM..