Journal Article

Abaza, Ahmed, Ferrari, Stefania , Wong, Hin Kwan, Lyness, Chris, Moore, Andrew D. , Weaving, Julia, Blanco-Martin, Maria, Dashwood, Richard and Bhagat, Rohit (2018) Experimental study of internal and external short circuits of commercial automotive pouch lithium-ion cells. Journal of Energy Storage, 16 . pp. 211-217. doi:10.1016/j.est.2018.01.015

Abbas, Syeda, Rees, Gregory J., Kelly, Nicole L., Dancer, Claire E. J., Hanna, John V. and McNally, Tony (2018) Facile silane functionalization of graphene oxide. Nanoscale, 10 (34). 16231-16242 . doi:10.1039/C8NR04781B

Adam, Zakiyya, Walasek, Lukasz and Meyer, Caroline (2018) Workforce commuting and subjective well-being. Travel Behaviour and Society, 13 . pp. 183-196. doi:10.1016/j.tbs.2018.08.006

Ahmad, Mussawar, Ferrer, Borja Ramis, Ahmad, Bilal, Vera, Daniel, Martinez Lastra, Jose L. and Harrison, Robert (2018) Knowledge-based PPR modelling for assembly automation. CIRP Journal of Manufacturing Science and Technology, 21 . pp. 33-46. doi:10.1016/j.cirpj.2018.01.001

Ahmed, Hafiz, Amamra, Sid-Ali and Salgado, Ivan (2018) Fast Estimation of Phase and Frequency for Single-Phase Grid Signal. IEEE Transactions on Industrial Electronics, 66 (8). pp. 6408-6411. doi:10.1109/TIE.2018.2860567

Alharthi, Hamzah, Hazra, S. K. , Alghamdi, Abdulrahman, Banabic, Dorel and Dashwood, Richard (2018) Determination of the yield loci of four sheet materials (AA6111-T4, AC600, DX54D+Z, and H220BD+Z) by using uniaxial tensile and hydraulic bulge tests). The International Journal of Advanced Manufacturing Technology, 98 (5-8). pp. 1307-1319. doi:10.1007/s00170-018-2339-5

Ali, Amjad, Xie, Fengwei, Yu, Long, Liu, Hongsheng, Meng, Linghan, Khalid, Saud and Chen, Ling (2018) Preparation and characterization of starch-based composite films reinfoced by polysaccharide-based crystals. Composites Part B: Engineering, 133 . pp. 122-128. doi:10.1016/j.compositesb.2017.09.017

Allafi, Walid, Zhang, Cheng, Uddin, Kotub, Worwood, Daniel, Dinh, Quang Truong, Ascencio Ormeno, Pedro, Li, Kang and Marco, James (2018) A lumped thermal model of lithium-ion battery cells considering radiative heat transfer. Applied Thermal Engineering, 143 . pp. 472-481. doi:10.1016/j.applthermaleng.2018.07.105

Allafi, Walid, zajic, Ivan, Uddin, Kotub, Zhonghua, Shen, Marco, James and Burnham, Keith (2018) Design of delayed fractional state variable filter for parameter estimation of fractional nonlinear models. Nonlinear Dynamics . pp. 1-17. doi:10.1007/s11071-018-4519-0

Allen, Frances M., Cain, Rebecca and Meyer, Caroline (2018) Seeking relational information sources in the digital age: A study into information source preferences amongst family and friends of those with dementia. Dementia . p. 147130121878656. doi:10.1177/1471301218786568

Amietszajew, Tazdin, McTurk, Euan, Fleming, Joseph and Bhagat, Rohit (2018) Understanding the limits of rapid charging using instrumented commercial 18650 high-energy Li-ion cells. Electrochimica Acta, 263 . pp. 346-352. doi:10.1016/j.electacta.2018.01.076

Arjmand, Doghonay, Poluektov, Mikhail and Kreiss, Gunilla (2018) Atomistic-continuum multiscale modelling of magnetisation dynamics at non-zero temperature. Advances in Computational Mathematics, 44 (4). pp. 1119-1151. doi:10.1007/s10444-017-9575-3

Arter, William E., Charmet, Jérôme, Kong, Jinglin, Saar, Kadi L., Herling, Therese W., Müller, Thomas, Keyser, Ulrich F. and Knowles, Tuomas P. J. (2018) Combining affinity selection and specific ion mobility for microchip protein sensing. Analytical Chemistry . doi:10.1021/acs.analchem.8b02051 (In Press)

Artusio, Fiora, Bazzano, Marco, Pisano, Roberto, Coulon, Pierre-Eugène, Rizza, Giancarlo, Schiller, Tara L. and Sangermano, Marco (2018) Polymeric nanocapsules via interfacial cationic photopolymerization in miniemulsion. Polymer, 139 . pp. 155-162. doi:10.1016/j.polymer.2018.02.019

Attya, A. B., Ademi, S., Jovanović, M. and Anaya-Lara, O. (2018) Frequency support using doubly fed induction and reluctance wind turbine generators. International Journal of Electrical Power & Energy Systems, 101 . pp. 403-414. doi:10.1016/j.ijepes.2018.04.007

Awasthi, Shalini, Gupta, Shalini, Tripathi, Ravi and Nair, Nisanth N. (2018) Mechanism and kinetics of Aztreonam hydrolysis catalyzed by class-C β-lactamase : a temperature-accelerated sliced sampling study. The Journal of Physical Chemistry B, 122 (15). pp. 4299-4308. doi:10.1021/acs.jpcb.8b01287

Awasthi, Shalini and Nair, Nisanth N. (2018) Exploring high-dimensional free energy landscapes of chemical reactions. Wiley Interdisciplinary Reviews : Computational Molecular Science . e1398. doi:10.1002/wcms.1398 (In Press)

Azmat, Freeha, Zhou, Yulin and Chen, Yunfei (2018) New cooperative strategy for cognitive radios with wireless powered primary users. International Journal of Communication Systems, 31 (7). e3355. doi:10.1002/dac.3355

Babu, Manoj, Franciosa, Pasquale and Ceglarek, Darek (2018) Shape error modelling and analysis by conditional simulations of Gaussian random fields for compliant non-ideal sheet metal parts. Procedia CIRP, 75 . pp. 279-284. doi:10.1016/j.procir.2018.04.023

Baier, Waltraud, Warnett, Jason M., Payne, Mark and Williams, M. A. (2018) Introducing 3D printed models as demonstrative evidence at criminal trials. Journal of Forensic Sciences, 63 (4). pp. 1298-1302. doi:10.1111/1556-4029.13700

Bakht, Humayun and He, Xiaoxiangyu (2018) An Analysis of Administrative Management, Financial and Security Barriers in E-Commerce Adoption in Small to Medium Size Enterprises (SME’s) in the United Kingdom. International Journal of Computing and Digital Systems, 7 (6). pp. 337-346. doi:10.12785/ijcds/070602

Bandi, Bharath, Dinda, Soumitra Kumar, Kar, Jyotirmaya, Roy, Gour Gopal and Srirangam, Prakash (2018) Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints : X-ray tomography study. Vacuum . doi:10.1016/j.vacuum.2018.09.060 (In Press)

Bandi, Bharath, Dinda, Soumitra Kumar, Kar, Jyotirmaya, Roy, Gour Gopal and Srirangam, Prakash (2018) Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints: X-ray tomography study. Vacuum, 158 . pp. 172-179. doi:10.1016/j.vacuum.2018.09.060

Barai, Anup, Uddin, Kotub, Widanage, Widanalage Dhammika, McGordon, Andrew and Jennings, P. A. (Paul A.) (2018) A study of the influence of measurement timescale on internal resistance characterisation methodologies for lithium-ion cells. Scientific Reports, 8 . 21. doi:10.1038/s41598-017-18424-5

Barnes, Nairn, Clark, Samuel, Seetharaman, Sridhar and Mendez, Patricio F. (2018) Growth mechanism of primary needles during the solidification of chromium carbide overlays. Acta Materialia, 151 . pp. 356-365. doi:10.1016/j.actamat.2018.03.050

Bauer, Dustin, Roberts, Alexander J. , Patnaik, Sai Gourang, Brett, Dan J. L., Shearing, Paul R., Kendrick, Emma, Matsumi, Noriyoshi and Darr, Jawwad A. (2018) High Power Sodium-Ion Batteries and Hybrid Electrochemical Capacitors Using Mo or Nb-Doped Nano-Titania Anodes. Journal of The Electrochemical Society, 165 (9). A1662-A1670. doi:10.1149/2.0341809jes

Bektas, Oguz, Jones, Jeffrey A., Sankararaman, Shankar, Roychoudhury, Indranil and Goebel, Kai (2018) Reconstructing secondary test database from PHM08 challenge data set. Data in Brief, 21 . pp. 2464-2469. doi:10.1016/j.dib.2018.11.085

Bernagozzi, Marco, Charmer, Stene, Georgoulas, Anastasios, Malavasi, Ileana, Michè, Nicolas and Marengo, Marco (2018) Lumped parameter network simulation of a Loop Heat Pipe for energy management systems in full electric vehicles. Applied Thermal Engineering, 141 . pp. 617-629. doi:10.1016/j.applthermaleng.2018.06.013

Bhalodiya , Jayendra M., Palit, Arnab, Tiwari, Manoj K., Prasad, Sanjay K., Bhudia, Sunil K., Arvanitis, Theodoros N. and Williams, M. A. (2018) A novel hierarchical template matching model for cardiac motion estimation. Scientific Reports, 8 (1). 4475. doi:10.1038/s41598-018-22543-y

Bhatia, Sudeep, Goodwin, G. and Walasek, Lukasz (2018) Trait associations for Hillary Clinton and Donald Trump in news media : a computational analysis. Social Psychological and Personality Science, 9 (2). pp. 123-130. doi:10.1177/1948550617751584

Bilici, Eda, Despotou, George and Arvanitis, Theodoros N. (2018) The use of computer-interpretable clinical guidelines to manage care complexities of patients with multimorbid conditions : a review. Digital Health, 4 . pp. 1-21. doi:10.1177/2055207618804927

Billimoria, Kharmen, Heeley, Ellen L., Parsons, Nathan and Figiel, Lukasz (2018) An investigation into the crystalline morphology transitions in poly-L- lactic acid (PLLA) under uniaxial deformation in the quasi-solid-state regime. European Polymer Journal, 101 . pp. 127-139. doi:10.1016/j.eurpolymj.2018.01.031 (In Press)

Bortolini, Christian, Kartanas, Tadas, Copic, Davor, Condado Morales, Itzel, Zhang, Yuewen, Challa, Pavan K., Peter, Quentin, Jávorfi, Tamás, Hussain, Rohanah, Dong, Mingdong, Siligardi, Giuliano, Knowles, Tuomas P. J. and Charmet, Jérôme (2018) Resolving protein mixtures using microfluidic diffusional sizing combined with synchrotron radiation circular dichroism. Lab on a Chip, 19 (1). pp. 50-58. doi:10.1039/C8LC00757H

Botha, Stefan, Zabihi, Nima, Dobzhanskyi, Oleksandr and Gouws, Rupert (2018) Intelligent fuzzy logic controller for improved power extraction of micro wind turbines. International Journal of Engineering & Technology, 7 (4). pp. 6115-6121. doi:10.14419/ijet.v7i4.23127

Boyes, Hugh, Hallaq, Bilal, Cunningham, Joe and Watson, Tim (2018) The industrial internet of things (IIoT) : an analysis framework. Computers in Industry, 101 . pp. 1-12. doi:10.1016/j.compind.2018.04.015

Bugeja, Keith, Debattista, Kurt and Spina, Sandro (2018) An asynchronous method for cloud-based rendering. The Visual Computer . doi:10.1007/s00371-018-1577-8 (In Press)

Buhagiar, Ranier, Cortis, Dominic and Newall, Philip (2018) Why do some soccer bettors lose more money than others? Journal of Behavioral and Experimental Finance, 18 . pp. 85-93. doi:10.1016/j.jbef.2018.01.010

Cao, Yue, Han, Chong, Zhang, Xu, Kaiwartya, Omprakash, Zhuang, Yuan, Aslam, Nauman and Dianati, Mehrdad (2018) A trajectory-driven opportunistic routing protocol for VCPS. IEEE Transactions on Aerospace and Electronic Systems . doi:10.1109/TAES.2018.2826201 (In Press)

Celottoa, S., Ghadbeigib, H., Pinnab, C., Shollock, Barbara A. and Efthymiadis, Panagiotis (2018) Deformation-induced microstructural banding in TRIP steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (7). pp. 2893-2906. doi:10.1007/s11661-018-4650-z

Chakkol, M., Karatzas, A., Johnson, M. and Godsell, J. (2018) Building bridges : boundary spanners in servitized supply chains. International Journal of Operations and Production Management, 38 (2). pp. 579-604. doi:10.1108/IJOPM-01-2016-0052

Chandler, Jennifer D., Danatzis, Ilias, Wernicke, Carolin, Akaka, Melissa Archpru and Reynolds, David (2018) How does innovation emerge in a service ecosystem? Journal of Service Research . doi:10.1177/1094670518797479

Chandra, Mahesh, Shukla, Rishabh, Rashid, Muhammad, Gupta, Amit, Basu, Suddhasatwa and Dhaka, R. S. (2018) Synthesis and physical properties of Na x TO 2 (T = Mn, Co) nanostructures for cathode materials in Na-ion batteries. Materials Research Bulletin, 105 . pp. 178-183. doi:10.1016/j.materresbull.2018.04.022

Charmet, Jérôme, Arosio, Paolo and Knowles, P. J. Knowles (2018) Microfluidics for protein biophysics. Journal of Molecular Biology, 430 (5). pp. 565-580. doi:10.1016/j.jmb.2017.12.015

Chen, Daqiang, Ignatius, Joshua, Sun, Danzhi, Goh, Mark and Zhan, Shalei (2018) Impact of congestion pricing schemes on emissions and temporal shift of freight transport. Transportation Research Part E: Logistics and Transportation Review, 118 . pp. 77-105. doi:10.1016/j.tre.2018.07.006

Chen, Jin, Li, Xiaoxi, Chen, Ling and Xie, Fengwei (2018) Starch film-coated microparticles for oral colon-specific drug delivery. Carbohydrate Polymers, 191 . pp. 242-254. doi:10.1016/j.carbpol.2018.03.025

Coburn, Nigel, Douglas, Paula, Kaya, Derya, Gupta, Jaipal and McNally, Tony (2018) Isothermal and non-isothermal crystallization kinetics of composites of poly(propylene) and MWCNTs. Advanced Industrial and Engineering Polymer Research, 1 (1). pp. 99-110. doi:10.1016/j.aiepr.2018.06.001

Crawford, Deborah, James, Stuart L. and McNally, Tony (2018) Use of batch mixing to investigate the continuous solvent-free mechanical synthesis of OLED materials by twin-screw extrusion (TSE). ACS Sustainable Chemistry & Engineering, 6 (1). pp. 193-201. doi:10.1021/acssuschemeng.7b02202

Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, D. K. (2018) Microstructure and mechanical properties of gap-bridged remote laser welded (RLW) automotive grade AA 5182 joints. Materials Characterization, 145 . pp. 697-712. doi:10.1016/j.matchar.2018.09.035

Das, Abhishek, Li, Dezhi, Williams, D. K. and Greenwood, David G. (2018) Joining technologies for automotive battery systems manufacturing. World Electric Vehicle Journal, 9 (2). 22. doi:10.3390/wevj9020022

Das, Abhishek, Masters, Iain and Williams, D. K. (2018) Process robustness and strength analysis of multi-layered dissimilar joints using ultrasonic metal welding. The International Journal of Advanced Manufacturing Technology . doi:10.1007/s00170-018-2936-3 (In Press)

De Giovanni, Mario, Alam, Talukder, Banerjee, Rajarshi and Srirangam, Prakash (2018) 3D atom probe tomography study on segregation of yttrium in modified Al-Si alloys. JOM, 70 (9). pp. 1765-1770. doi:10.1007/s11837-018-2909-x

Deakin, Joshua, Trussov, Ivan, Gibbs, Alexandra, Kendrick, Emma and Slater, Peter R. (2018) Carbonate : an alternative dopant to stabilize new perovskite phases ; synthesis and structure of Ba3Yb2O5CO3 and related isostructural phases Ba3Ln2O5CO3 (Ln = Y, Dy, Ho, Er, Tm and Lu). Dalton Transactions, 47 (37). pp. 12901-12906. doi:10.1039/c8dt02691b

Debattista, Kurt (2018) Application-specific tone mapping via genetic programming. Computer Graphics Forum, 37 (1). pp. 439-450. doi:10.1111/cgf.13307

Debattista, Kurt, Bashford-Rogers, Thomas, Harvey, Carlo, Waterfield, Brian and Chalmers, Alan (2018) Subjective evaluation of high-fidelity virtual environments for driving simulations. IEEE Transactions on Human-Machine Systems, 48 (1). pp. 30-40. doi:10.1109/THMS.2017.2762632

Deignan, Anne, Figiel, Lukasz and McCarthy, Michael (2018) Insights into complex rheological behaviour of carbon fibre/PEEK from a novel numerical methodology incorporating fibre friction and melt viscosity. Composite Structures, 189 . pp. 614-626. doi:10.1016/j.compstruct.2018.01.084

Desire, Christopher T., Khodabandeh, Aminreza, Schiller, Tara L., Wilson, Russell, Arrua, R. Dario, Bon, Stefan A. F. and Hilder, Emily F. (2018) Preparation of highly interconnected hydrophilic polymers from emulsion templates with improved mechanical properties. European Polymer Journal, 102 . pp. 56-67. doi:10.1016/j.eurpolymj.2018.02.002

Dhadyalla, G., Yang, C. P., Marco, James and Jennings, P. A. (2018) Real-time sequence testing of an automotive electric machine control systems. SAE Technical Papers . 2018-01-0004. doi:10.4271/2018-01-0004

Dinh, Quang Truong, Marco, James, Greenwood, David G., Ahn, Kyoung Kwan and Yoon, Yong Il (2018) Data-based predictive hybrid driven control for a class of imperfect networked systems. IEEE Transactions on Industrial Informatics . doi:10.1109/TII.2018.2799081 (In Press)

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L., Corrochano, D. G. and Yoon, J. I. (2018) Challenges of micro/mild hybridisation for construction machinery and applicability in UK. Renewable and Sustainable Energy Reviews , 91 . pp. 301-320. doi:10.1016/j.rser.2018.03.027

Dinh, Quang Truong, Marco, James, Yoon, Jong Il and Ahn, Kyoung Kwan (2018) Robust predictive tracking control for a class of nonlinear systems. Mechatronics, 52 . pp. 135-149. doi:10.1016/j.mechatronics.2018.04.010

Dong, Yuanfa and Liu, Wenrong (2018) Research on UX evaluation method of design concept under multi-modal experience scenario in the earlier design stages. International Journal on Interactive Design and Manufacturing (IJIDeM) , 12 (2). pp. 505-515. doi:10.1007/s12008-017-0393-0

Doukakis, Efstratios, Debattista, Kurt, Harvey, Carlo, Bashford-Rogers, Thomas and Chalmers, Alan (2018) Audiovisual resource allocation for bimodal virtual environments. Computer Graphics Forum, 37 (1). pp. 172-183. doi:10.1111/cgf.13258

Driscoll, L. L., Kendrick, Emma, Knight, K. S., Wright, A. J. and Slater, P. R. (2018) Investigation into the dehydration of selenate doped Na 2 M(SO 4 ) 2 ·2H 2 O (M = Mn, Fe, Co and Ni): Stabilisation of the high Na content alluaudite phases Na 3 M 1.5 (SO 4 ) 3-1.5x (SeO 4 ) 1.5x (M = Mn, Co and Ni) through selenate incorporation. Journal of Solid State Chemistry, 258 . pp. 64-71. doi:10.1016/j.jssc.2017.09.025

Dubad, Muna, Winsper, Catherine, Meyer, Caroline, Livanou, Maria and Marwaha, Steven (2018) A systematic review of the psychometric properties, usability, and clinical impacts of mobile mood-monitoring applications in young people. Psychological Medicine, 48 (2). pp. 208-228. doi:10.1017/S0033291717001659

Ellingford, Christopher, Bowen, Christopher, McNally, Tony and Wan, Chaoying (2018) Intrinsically tuning the electromechanical properties of elastomeric dielectrics : a chemistry perspective. Macromolecular Rapid Communications, 39 (18). 1800340. doi:10.1002/marc.201800340

Ellingford, Christopher, Wan, Chaoying, Figiel, Lukasz and McNally, Tony (2018) Mechanical and dielectric properties of MWCNT filled chemically modified SBS/PVDF blends. Composites Communications, 8 . pp. 58-64. doi:10.1016/j.coco.2017.11.001

Ellingford, Christopher, Zhang, Runan, Wemyss, Alan, Bowen, Chris R., McNally, Tony, Figiel, Lukasz and Wan, Chaoying (2018) Intrinsic tuning of poly (styrene-butadiene-styrene) (SBS) based self-healing dielectric elastomer actuators with enhanced electromechanical properties. ACS Applied Materials & Interfaces, 10 (44). pp. 38438-38448. doi:10.1021/acsami.8b13785

Esfahani, Mohammad Nasr and Alaca, B. Erdem (2018) Surface stress effect on silicon nanowire mechanical behaviour : size and orientation dependence. Mechanics of Materials, 127 . pp. 112-123. doi:10.1016/j.mechmat.2018.09.004

Fereshteh-Saniee, Nessa, Reynolds, Neil, Kelly, Catherine A., Wilson, Peter R., Jenkins, Mike J. and Kendall, Kenneth N. (2018) Introducing cryomilling for reliable determination of resin content and degree of cure in structural carbon fibre reinforced thermoset composites. Composites Part A: Applied Science and Manufacturing, 107 . pp. 197-204. doi:10.1016/j.compositesa.2018.01.004

Fernandes, Felipe C., Kirwan, Kerry, Wilson, Peter R. and Coles, Stuart R. (2018) Optimisation of waste vegetable oil-based thermoset polymers. Green Materials . pp. 1-36. doi:10.1680/jgrma.17.00036

Figiel, Lukasz (2018) Nonlinear multiscale modelling of quasi-solid state behaviour of PET/MWCNT nanocomposites : 3D RVE-based approach. Composites Communications, 8 . pp. 101-105. doi:10.1016/j.coco.2017.12.004

Fleming, Joe, Amietszajew, Tazdin, McTurk, Euan, Greenwood, Dave and Bhagat, Rohit (2018) Development and evaluation of in-situ instrumentation for cylindrical Li-ion cells using fibre optic sensors. HardwareX, 3 . pp. 100-109. doi:10.1016/j.ohx.2018.04.001

Fowley, Ciarán, Rode, Karsten, Lau, Yong-Chang, Thiyagarajah, Naganivetha, Betto, Davide, Borisov, Kiril, Atcheson, Gwenaël, Kampert, Erik, Wang, Zhaosheng, Yuan, Ye, Zhou, Shengqiang, Lindner, Jürgen, Stamenov, Plamen, Coey, J. M. D. and Deac, Alina Maria (2018) Magnetocrystalline anisotropy and exchange probed by high-field anomalous Hall effect in fully compensated half-metallic Mn2RuxGa thin films. Physical Review B (Condensed Matter and Materials Physics), 98 (22). doi:10.1103/PhysRevB.98.220406

Garcia-Torres, Jose, Roberts, Alexander J. , Slade, Robert C.T. and Crean, Carol (2018) One-step wet-spinning process of CB/CNT/MnO2 nanotubes hybrid flexible fibres as electrodes for wearable supercapacitors. Electrochimica Acta, 296 . pp. 481-490. doi:10.1016/j.electacta.2018.10.201

Geitner, Claudia, Birrell, Stewart A., Krehl, Claudia and Jennings, P. A. (Paul A.) (2018) Haptic foot pedal : influence of shoe type, age, and gender on subjective pulse perception. Human Factors, 60 (4). pp. 496-509. doi:10.1177/0018720818771906

Genieser, Ronny, Ferrari, Stefania , Loveridge, Melanie, Beattie, Shane D., Beanland, R., Amari, Houari , West, Geoffrey D. and Bhagat, Rohit (2018) Corrigendum to ‘Lithium ion batteries (NMC/graphite) cycling at 80 °C : different electrolytes and related degradation mechanism’ [J. Power Sources 373 (2017) 172–183]. Journal of Power Sources, 382 . p. 198. doi:10.1016/j.jpowsour.2018.02.044

Genieser, Ronny, Ferrari, Stefania , Loveridge, Melanie, Beattie, Shane D., Beanland, R., Amari, Houari , West, Geoffrey D. and Bhagat, Rohit (2018) Lithium ion batteries (NMC/graphite) cycling at 80 °C : different electrolytes and related degradation mechanism. Journal of Power Sources, 373 . pp. 172-183. doi:10.1016/j.jpowsour.2017.11.014

Genieser, Ronny, Loveridge, Melanie and Bhagat, Rohit (2018) Practical high temperature (80 °C) storage study of industrially manufactured Li-ion batteries with varying electrolytes. Journal of Power Sources, 386 . pp. 85-95. doi:10.1016/j.jpowsour.2018.03.050

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2018) End-effector design optimisation and multi-robot motion planning for handling compliant parts. Structural and Multidisciplinary Optimization, 57 (3). pp. 1377-1390. doi:10.1007/s00158-017-1798-x

Gnanamuthu , Ramasamy, Wilson, Neil R. and Bhagat, Rohit (2018) Improved discharge-charge properties of tin electrode using silver nanoparticles for energy storage and conversion in batteries. Materials Chemistry and Physics, 205 . pp. 147-153. doi:10.1016/j.matchemphys.2017.09.072

Godsell, Janet, Masi, Donato, Karatzas, Antonios and Brady, T. (2018) Using project demand profiling to improve the effectiveness and efficiency of infrastructure projects. International Journal of Operations and Production Management, 38 (6). pp. 1422-1442. doi:10.1108/IJOPM-02-2017-0095

Gollapalli, Veerababu, Rao, M. B. Venkata, Karamched, Phani S., Borra, Chenna Rao, Roy, Gour G. and Srirangam, Prakash (2018) Modification of oxide inclusions in calcium-treated Al-killed high sulphur steels. Ironmaking & Steelmaking . pp. 1-8. doi:10.1080/03019233.2018.1443382 (In Press)

Goodall, Aimee, Ju, Yu Lin, Davis, Claire and Strangwood, Martin (2018) Effect of tempering on hardness of Q&T steel plate. Materials Science Forum, 941 . pp. 311-316. doi:10.4028/www.scientific.net/MSF.941.311

Grandjean, Thomas R. B., Groenewald, Jakobus, McGordon, Andrew, Widanage, Widanalage Dhammika and Marco, James (2018) Accelerated internal resistance measurements of lithium-ion cells to support future end-of-life strategies for electric vehicles. Batteries, 4 (4). 49. doi:10.3390/batteries4040049

Gu, Chao, Gao, Steven, Izquierdo, Benito Sanz, Gibbons, Gregory John, Young, Paul R., Parker, Edward A., Qin, Fan, Wen, Geyi, Cheng, Zhiqun, Geng, Youlin and Liu, Ying (2018) Wideband high-gain millimetre/submillimetre wave antenna using additive manufacturing. IET Microwaves, Antennas & Propagation, 12 (11). pp. 1758-1764. doi:10.1049/iet-map.2018.5412

Guerra, Valentina, Wan, Chaoying, Degirmenci, Volkan, Sloan, Jeremy, Presvytis, Dimitris and McNally, Tony (2018) 2D boron nitride nanosheets (BNNS) prepared by high-pressure homogenisation : structure and morphology. Nanoscale, 10 (41). 19469-19477 . doi:10.1039/C8NR06429F

Gunes, Nurhan, Higgins, Matthew D. and Leeson, Mark S. (2018) The use of symmetric quartic potential well for noise filtering. Fluctuation and Noise Letters, 17 (3). 1850019. doi:10.1142/S0219477518500190

Han, Chong, Dianati, Mehrdad, Cao, Yue, Mccullough, Francis and Mouzakitis, Alexandros (2018) Adaptive network segmentation and channel allocation in large-scale V2X communication networks. IEEE Transactions on Communications, 67 (1). pp. 405-416. doi:10.1109/TCOMM.2018.2868080

Harvey, Carlo, Bashford-Rogers, Thomas, Debattista, Kurt, Doukakis, Efstratios and Chalmers, Alan (2018) Olfaction and selective-rendering. Computer Graphics Forum, 37 (1). pp. 350-362. doi:10.1111/cgf.13295

Hay, Phillipa, Touyz, Stephen, Arcelus, Jon, Pike, Kathleen, Attia, Evelyn, Crosby, Ross D., Madden, Sloane, Wales, Jackie, La Puma, Michelle, Heriseanu, Andreea I., Young, Sarah and Meyer, Caroline (2018) A randomized controlled trial of the compuLsive Exercise Activity TheraPy (LEAP) : a new approach to compulsive exercise in anorexia nervosa. International Journal of Eating Disorders, 51 (8). pp. 999-1004. doi:10.1002/eat.22920

Hooper, James Michael, Marco, James, Chouchelamane, Gael Henri, Chevalier, Julie Sylvie and Williams, Darren (2018) Multi-axis vibration durability testing of lithium ion 18650 NCA cylindrical cells. Journal of Energy Storage, 15 . pp. 103-123. doi:10.1016/j.est.2017.11.006

Hosseinzadeh, Elham, Marco, James and Jennings, P. A. (Paul A.) (2018) The impact of multi-layered porosity distribution on the performance of a lithium ion battery. Applied Mathematical Modelling, 61 . pp. 107-123. doi:10.1016/j.apm.2018.04.001

Hosseinzadeh , Elham, Genieser, Ronny, Worwood, Daniel, Barai, Anup, Marco, James and Jennings, P. A. (Paul A.) (2018) A systematic approach for electrochemical-thermal modelling of a large format lithium-ion battery for EV application. Journal of Power Sources, 382 . pp. 77-94. doi:10.1016/j.jpowsour.2018.02.027

Huang, Qianye, Loveridge, Melanie, Genieser, Ronny, Lain, Michael J. and Bhagat, Rohit (2018) Electrochemical evaluation and phase-related impedance studies on silicon–few layer graphene (FLG) composite electrode systems. Scientific Reports, 8 (1). 1386. doi:10.1038/s41598-018-19929-3

Ignatius, Joshua, Tan, Tian Siang, Dhamotharan, Lalitha and Goh, Mark (2018) DEREGULATION CONTROL BY MERGERS AND ACQUISITIONS: A GAME THEORETIC ANALYSIS OF THE CHINESE AIRLINE INDUSTRY. Technological and Economic Development of Economy, 24 (6). pp. 2277-2294. doi:10.3846/20294913.2016.1266410

Jaiswal, Avinash, Williams, M. A., Bhalerao, Abhir, Tiwari, Manoj K. and Warnett, Jason M. (2018) Markov random field segmentation for industrial computed tomography with metal artefacts. Journal of X-ray science and technology, 26 (4). pp. 573-591. doi:10.3233/XST-17322

Janani, Ronak, Mader, Kerstin, Roberts, Alexander John, Farmilo, Nicolas and Sammon, Chris (2018) Fast-cure ionogel electrolytes with improved ion transport kinetics at room temperature. Journal of Power Sources, 406 . pp. 141-150. doi:10.1016/j.jpowsour.2018.10.049

Jasinski, Dominik, Cinelli, Marco, Dias, Luis, Meredith, James O. and Kirwan, Kerry (2018) Assessing supply risks for non-fossil mineral resources via multi-criteria decision analysis. Resources Policy . doi:https://doi.org/10.1016/j.resourpol.2018.04.011 (In Press)

Jasinski, Dominik, Meredith, James and Kirwan, Kerry (2018) The life cycle impact for platinum group metals and lithium to 2070 via surplus cost potential. The International Journal of Life Cycle Assessment, 23 (4). pp. 773-786. doi:10.1007/s11367-017-1329-4

Jeffs, James, McGordon, Andrew, Picarelli, Alessandro, Robinson, Simon, Tripathy, Yashraj and Widanage, Widanalage Dhammika (2018) Complex heat pump operational mode identification and comparison for use in electric vehicles. Energies, 11 (8). p. 2000. doi:10.3390/en11082000

Jha, Shristy, Mandal, Animesh and Srirangam, Prakash (2018) Optimization of casting process parameters for synthesis of Al-Nb-B master alloy. JOM . doi:10.1007/s11837-018-3125-4 (In Press)

Jiang, R., Proprentner, Daniela, Callisti, M., Shollock, Barbara A., Hu, X. T., Song, Y. D. and Reed, P. A. S. (2018) Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy : stress assisted grain boundary oxidation or dynamic embrittlment? Corrosion Science, 139 . pp. 141-154. doi:10.1016/j.corsci.2018.05.001

Johari, Maryam, Hosseini-Motlagh, Seyyed-Mahdi, Nematollahi, Mohammadreza, Goh, Mark and Ignatius, Joshua (2018) Bi-level credit period coordination for periodic review inventory system with price-credit dependent demand under time value of money. Transportation Research Part E: Logistics and Transportation Review, 114 . pp. 270-291. doi:10.1016/j.tre.2018.04.008

Ju, Yu Lin, Goodall, Aimee, Davis, Claire and Strangwood, Martin (2018) Characterisation of precipitation and coarsening of carbides during tempering in a low alloyed quenched and tempered steel. Materials Science Forum, 941 . pp. 33-38. doi:10.4028/www.scientific.net/MSF.941.33

Ju, Yulin, Goodall, Aimee, Strangwood, Martin and Davis, Claire (2018) Characterisation of precipitation and carbide coarsening in low carbon low alloy Q&T steels during the early stages of tempering. Materials Science and Engineering: A, 738 . pp. 174-189. doi:10.1016/j.msea.2018.09.044

Juanchich, Marie, Walasek, Lukasz and Sirota, Miroslav (2018) Decision-makers are resilient in the face of social exclusion. British Journal of Psychology . doi:10.1111/bjop.12294 (In Press)

Kampert, Erik, Jennings, P. A. and Higgins, Matthew D. (2018) Investigating the V2V millimeter-wave channel near a vehicular headlight in an engine bay. IEEE Communications Letters . doi:10.1109/LCOMM.2018.2829181 (In Press)

Kapoor, Ishwar, Lan, Yongjun, Rijkenberg, Arjan, Li, Zushu and Janik, Vit (2018) Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel. Materials Characterization, 145 . pp. 686-696. doi:10.1016/j.matchar.2018.09.032

Kar, Jyotirmaya, Dinda, Soumitra Kumar, Roy, Gour Gopal, Roy, Sanat Kumar and Srirangam, Prakash (2018) X-ray tomography study on porosity in electron beam welded dissimilar copper–304SS joints. Vacuum, 149 . pp. 200-206. doi:10.1016/j.vacuum.2017.12.038

Kay, Christopher, Goring, Paul D., Burnett, Connah A., Hornby, Ben, Lewtas, Kenneth, Morris, Shaun N., Morton, Colin, McNally, Tony, Theaker, Giles W., Waterson, Carl, Wright, Peter M. and Scott, Peter (2018) Polyolefin–polar block copolymers from versatile new macromonomers. Journal of the American Chemical Society, 140 (42). pp. 13921-13934. doi:10.1021/jacs.8b09039

Kellner, Quirin, Hosseinzadeh, Elham, Chouchelamane, Gael, Widanage, Widanalage Dhammika and Marco, James (2018) Battery cycle life test development for high-performance electric vehicle applications. Journal of Energy Storage, 15 . pp. 228-244. doi:10.1016/j.est.2017.11.019

Kellner, Quirin, Worwood, Daniel, Barai, Anup, Widanage, Widanalage Dhammika and Marco, James (2018) Duty-cycle characterisation of large-format automotive lithium ion pouch cells for high performance vehicle applications. Journal of Energy Storage, 19 . pp. 170-184. doi:10.1016/j.est.2018.07.018

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, Paul. A. (2018) Calibrating trust through knowledge : introducing the concept of informed safety for automation in vehicles. Transportation Research Part C: Emerging Technologies, 96 . pp. 290-303. doi:10.1016/j.trc.2018.07.001

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, Paul. A. (2018) Calibrating trust through knowledge: Introducing the concept of informed safety for automation in vehicles. Transportation Research Part C: Emerging Technologies, 96 . pp. 290-303. doi:10.1016/j.trc.2018.07.001

Komissarova, T. A., Kampert, Erik, Law, J., Jmerik, V. N., Paturi, P., Wang, X., Yoshikawa, A. and Ivanov, S. V. (2018) Electrical properties of surface and interface layers of the N- and In-polar undoped and Mg-doped InN layers grown by PA MBE. Applied Physics Letters, 112 (2). 022104. doi:10.1063/1.5009794

Kotadia, H. R., Qian, M. and Das, A. (2018) Solidification of Aluminium Alloys Under Ultrasonication: An Overview. Transactions of the Indian Institute of Metals, 71 (11). pp. 2681-2686. doi:10.1007/s12666-018-1446-1

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard and Williams, M. A. (2018) Computed tomography metrological examination of additive manufactured acetabular hip prosthesis cups. Additive Manufacturing, 22 . pp. 146-152. doi:10.1016/j.addma.2018.04.033

Kreplin, Ute, Burns, Christopher and Fairclough, Stephen H. (2018) FNIRS activity in the prefrontal cortex and motivational intensity : impact of working memory load, financial reward, and correlation-based signal improvement. Neurophotonics, 5 (3). 035001. doi:10.1117/1.NPh.5.3.035001

Kumar, Vikas, Bak, Ozlem, Guo, Ruizhi, Shaw, Sarah Louise, Colicchia, Claudia, Garza-Reyes, Jose Arturo and Kumari, Archana (2018) An empirical analysis of supply and manufacturing risk and business performance: a Chinese manufacturing supply chain perspective. Supply Chain Management: An International Journal, 23 (6). pp. 461-479. doi:10.1108/SCM-10-2017-0319

Kumar Rout, Bapin, Brooks, Geoff, Rhamdhani, M. Akbar, Li, Zushu, Schrama, Frank N. H. and Sun, Jianjun (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : model derivation and validation. Metallurgical and Materials Transactions B . doi:10.1007/s11663-017-1166-7 (In Press)

Kunc, Martin, Mortenson, Michael J. and Vidgen, Richard (2018) A computational literature review of the field of System Dynamics from 1974 to 2017. Journal of Simulation, 12 (2). pp. 115-127. doi:10.1080/17477778.2018.1468950

Kuutti, Sampo, Fallah, Saber, Katsaros, Konstantinos, Dianati, Mehrdad, Mccullough, Francis and Mouzakitis, Alexandros (2018) A Survey of the State-of-the-Art Localization Techniques and Their Potentials for Autonomous Vehicle Applications. IEEE Internet of Things Journal, 5 (2). pp. 829-846. doi:10.1109/JIOT.2018.2812300

Laleci Erturkmen, Gokce B., Yuksel, Mustafa, Sarigul, Bunyamin, Lilja, Mikael, Chen, Rong and Arvanitis, Theodoros N. (2018) Personalised Care Plan Management Utilizing Guideline-Driven Clinical Decision Support Systems. Studies in health technology and informatics, 247 . pp. 750-754.

Lallie, Harjinder Singh, Debattista, Kurt and Bal, Jay (2018) Evaluating practitioner cyber-security attack graph configuration preferences. Computers & Security, 79 . pp. 117-131. doi:10.1016/j.cose.2018.08.005

Lallie, Harjinder Singh, Debattista, Kurt and Bal, Jay (2018) An empirical evaluation of the effectiveness of attack graphs and fault trees in cyber-attack perception. IEEE Transactions on Information Forensics and Security, 13 (5). pp. 1110-1122. doi:10.1109/TIFS.2017.2771238

Lapko, Yulia, Trianni, Andrea, Nuur, Cali and Masi, Donato (2018) In pursuit of closed-loop supply chains for critical materials : an exploratory study in the Green Energy sector. Journal of Industrial Ecology . doi:10.1111/jiec.12741 (In Press)

Larsen, Samuel Brüning, Masi, Donato, Feibert, Diana Cordes and Jacobsen, Peter (2018) How the reverse supply chain impacts the firm’s financial performance : a manufacturer's perspective. International Journal of Physical Distribution & Logistics Management, 48 (3). pp. 284-307. doi:10.1108/IJPDLM-01-2017-0031

Larsen, Samuel Brüning, Masi, Donato, Jacobsen, Peter and Godsell, Janet (2018) How the reverse supply chain contributes to a firm’s competitive strategy : a strategic alignment perspective. Production Planning & Control, 29 (6). pp. 452-463. doi:10.1080/09537287.2017.1390178

Latko-Durałek, Paulina, Macutkevic, Jan, Kay, Christopher James, Boczkowska, Anna and McNally, Tony (2018) Hot-melt adhesives based on co-polyamide and multiwalled carbon nanotubes. Journal of Applied Polymer Science, 135 (11). 45999. doi:10.1002/app.45999

Le, Anhtuan, Chen, Yue-Qin, Chai, Kok Keong, Vasenev, Alexandr and Montoya, Lorena (2018) Incorporating FAIR into Bayesian network for numerical assessment of loss event frequencies of smart grid cyber threats. Mobile Networks and Applications, 1 . pp. 1-9. 11036. doi:10.1007/s11036-018-1047-6

Li, Dezhi, Han, Li, Chrysanthou, Andreas and Shergold, Mike (2018) Influence of corrosion of self-piercing riveted high strength aluminium alloy joints with button cracks on the mechanical strength. Journal of Material Science and Technology Research, 5 . pp. 16-27. doi:10.15377/2410-4701.2018.05.4

Li, Muzi, Coakley, James, Isheim, Dieter, Tian, Gaofeng and Shollock, Barbara A. (2018) Influence of the initial cooling rate from γ′ supersolvus temperatures on microstructure and phase compositions in a nickel superalloy. Journal of Alloys and Compounds, 732 . pp. 765-776. doi:10.1016/j.jallcom.2017.10.263

Li, Muzi, Pham, Minh-Son, Peng, Zichao, Tian, Gaofeng and Shollock, Barbara A. (2018) Creep deformation mechanisms and CPFE modelling of a nickel-base superalloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 718 . pp. 147-156. doi:10.1016/j.msea.2018.01.100

Lippmann, Philip, Poluektov, Mikhail and Figiel, Lukasz (2018) Stress-affected lithiation reactions in elasto-viscoplastic Si particles with hyperelastic polymer coatings : a nonlinear chemo-mechanical finite-element study. Coatings, 8 (12). 455. doi:10.3390/coatings8120455

Liu, Kailong, Zou, Changfu, Li, Kang and Wik, Torsten (2018) Charging pattern optimization for lithium-ion batteries with an electrothermal-aging model. IEEE Transactions on Industrial Informatics, 14 (12). pp. 5463-5474. doi:10.1109/TII.2018.2866493

Liu, Kun, Tan, Xiaoyan, Li, Xiaoxi, Chen, Ling and Xie, Fengwei (2018) Characterization of regenerated starch from 1-ethyl-3-methylimidazolium acetate ionic liquid with different anti-solvents. Journal of Polymer Science Part B: Polymer Physics, 56 (18). pp. 1231-1238. doi:10.1002/polb.24714

Llano Chiguano, Danilo X (Xavier) and McMahon, Richard A. (2018) Modelling, control and sensorless speed estimation of micro-wind turbines for deployment in Antarctica. IET Renewable Power Generation, 12 (3). pp. 342-350. doi:10.1049/iet-rpg.2016.0528

Loveridge, Melanie, Remy, Guillaume , Kourra, Nadia, Genieser, Ronny, Barai, Anup, Lain, Mike J., Guo, Yue, Amor-Segan, Mark, Williams, Mark A., Amietszajew, Tazdin, Ellis, Mark, Bhagat, Rohit and Greenwood, David G. (2018) Looking deeper into the galaxy (note 7). Batteries, 4 (3). 3. doi:10.3390/batteries4010003

Luo, Chen, Franciosa, Pasquale, Ceglarek, Darek, Ni, Zhonghua and Jia, Fang (2018) A novel geometric tolerance modeling inspired by parametric space envelope. IEEE Transactions on Automation Science and Engineering, 15 (3). pp. 1386-1398. doi:10.1109/TASE.2018.2793920

Luo, Hua, Zhang, Yue, Li, Wei, Huang, Li-Ke, Cosmas, John, Li, Dayou, Maple, Carsten and Zhang, Xun (2018) Low latency parallel turbo decoding implementation for future terrestrial broadcasting systems. IEEE Transactions on Broadcasting, 64 (1). pp. 96-104. doi:10.1109/TBC.2017.2704425

Mahapatra, Indrani, Clark, Julian R. A., Dobson, Peter J., Owen, Richard, Lynch, Iseult and Lead, Jamie R. (2018) Expert perspectives on potential environmental risks from nanomedicines and adequacy of the current guideline on environmental risk assessment. Environmental Science: Nano, 5 (8). pp. 1873-1889. doi:10.1039/C8EN00053K

Mandal, Abhisek, Karmakar, Anish, Chakrabarti, Debalay and Davis, Claire (2018) Effect of Alloying and Coiling Temperature on the Microstructure and Bending Performance of Ultra-High-Strength Strip Steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (12). pp. 6359-6374. doi:10.1007/s11661-018-4946-z

Mandal, Abhisek, Karmakar, Anish, Chakrabarti, Debalay and Davis, Claire (2018) Effect of alloy treatment and coiling temperature on microstructure and bending performance of ultra-high strength strip steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-018-4946-z

Manias, Karen A., Harris, Lisa M., Davies, Nigel P., Natarajan, Kal, MacPherson, Lesley, Foster, Katharine, Brundler, Marie-Anne, Hargrave, Darren R., Payne, Geoffery S., Leach, Martin O., Morgan, Paul S., Auer, Dorothee P., Jaspan, Tim, Arvanitis, Theodoros N., Grundy, Richard G. and Peet, Andrew C. (2018) Prospective multicentre evaluation and refinement of an analysis tool for magnetic resonance spectroscopy of childhood cerebellar tumours. Pediatric Radiology, 48 (11). pp. 1630-1641. doi:10.1007/s00247-018-4182-0

Masi, Donato, Kumar, Vikas, Garza-Reyes, Jose Arturo and Godsell, Janet (2018) Towards a more circular economy : exploring the awareness, practices, and barriers from a focal firm perspective. Production Planning & Control, 29 (6). pp. 539-550. doi:10.1080/09537287.2018.1449246

Masson, Vianney, Mathews, James R., Moreau, Stéphane, Posson, Hélène and Brambley, Edward J. (James) (2018) The impedance boundary condition for acoustics in swirling ducted flow. Journal of Fluid Mechanics, 849 . pp. 645-675. doi:10.1017/jfm.2018.429

Masson, Vianney , Mathews, James , Moreau, Stéphane, Posson , Hélène and Brambley, Edward J. (James) (2018) The impedance boundary condition for acoustics in swirling ducted flow. Journal of Fluid Mechanics, 849 . pp. 645-675. doi:10.1017/jfm.2018.429

McCaig, Duncan, Bhatia, Sudeep, Elliott, Mark T., Walasek, Lukasz and Meyer, Caroline (2018) Text-mining as a methodology to assess eating disorder-relevant factors : comparing mentions of fitness tracking technology across online communities. International Journal of Eating Disorders, 51 (7). pp. 647-655. doi:10.1002/eat.22882

McCaig, Duncan, Bhatia, Sudeep, Elliott, Mark T., Walasek, Lukasz and Meyer, Caroline (2018) Text-mining as a methodology to assess eating disorder-relevant factors: Comparing mentions of fitness tracking technology across online communities. International Journal of Eating Disorders, 51 (7). pp. 647-655. doi:10.1002/eat.22882

McCreedy, Aimee, Bird, Sumedha, Brown, Lucy J., Shaw-Stewart, James and Chen, Y-F.‏‎ (2018) Effects of maternal caffeine consumption on the breastfed child : a systematic review. Swiss medical weekly, 148 . w14665. doi:10.4414/smw.2018.14665

McEwen, Iain, Cooper, David E., Warnett, Jason M., Kourra, Nadia, Williams, M. A. and Gibbons, Gregory John (2018) Design & manufacture of a high-performance bicycle crank by additive manufacturing. Applied Sciences, 8 (8). 1360. doi:https://doi.org/10.3390/app8081360

McMahon, Richard A., Santos, Hugo and Sobral Mourao, Zanaida (2018) Practical considerations in the deployment of ground source heat pumps in older properties - a case study. Energy & Buildings, 159 . pp. 54-65.

McTurk, Euan, Amietszajew, Tazdin, Fleming, Joseph and Bhagat, Rohit (2018) Thermo-electrochemical instrumentation of cylindrical Li-ion cells. Journal of Power Sources, 379 . pp. 309-316. doi:10.1016/j.jpowsour.2018.01.060

Millinger, Jonas, Wallmark, Oskar and Soulard, Juliette (2018) High frequency characterization of losses in fully assembled stators of slotless PM motors. IEEE Transactions on Industry Applications . p. 1. doi:10.1109/TIA.2018.2806883 (In Press)

Mohjazi, Lina, Muhaidat, Sami, Dianati, Mehrdad, Al-Qutayri, Mahmoud and Al-Dhahir, Naofal (2018) Performance Analysis of SWIPT Relaying Systems in the Presence of Impulsive Noise. IEEE Access, 6 . pp. 71662-71677. doi:10.1109/ACCESS.2018.2882060

Mohjazi, Lina, Muhaidat, Sami, Dianati, Mehrdad, Al-Qutayri, Mahmoud and Al-Dhahir, Naofal (2018) Performance analysis of SWIPT relaying systems in the presence of impulsive noise. IEEE Access, 6 . pp. 71662-71677. doi:10.1109/ACCESS.2018.2882060

Mohjazi, Lina, Muhaidat, Sami, Muhaidat, Sami, Dianati, Mehrdad and Al-Qutayri, Mahmoud (2018) Performance analysis of SWIPT relay networks with noncoherent modulation. IEEE Transactions on Green Communications and Networking . pp. 1072-1086. 2. doi:10.1109/TGCN.2018.2856363

Montanaro, Umberto, Dixit, Shilp, Fallah, Saber, Dianati, Mehrdad, Stevens, Alan, Oxtoby, David and Mouzakitis, Alexandros (2018) Towards connected autonomous driving: review of use-cases. Vehicle System Dynamics, 57 (6). pp. 779-814. doi:10.1080/00423114.2018.1492142

Mu, Mulan, Teblum, Eti, Figiel, Lukasz, Nessim , Gilbert and McNally, Tony (2018) Correlation between MWCNT aspect ratio and the mechanical properties of composites of PMMA and MWCNTs. Materials Research Express, 5 (4). 045305. doi:10.1088/2053-1591/aab82d

Mukherjee, Ratnajit, Debattista, Kurt, Bashford-Rogers, Thomas, Bessa, Maximino and Chalmers, Alan (2018) Uniform color space based high dynamic range video compression. IEEE Transactions on Circuits and Systems for Video Technology . doi:10.1109/TCSVT.2018.2861560 (In Press)

Naguib, Mohamed, Schiller, Tara L. and Keddie, Daniel J. (2018) Rapid, regioselective living ring-opening metathesis polymerization of bio-derivable asymmetric tricyclic oxanorbornenes. Macromolecular Rapid Communications, 39 (7). doi:10.1002/marc.201700794

Navaratnarajah, S., Dianati, Mehrdad and Imran, M. A. (2018) A novel load balancing scheme for cellular-WLAN heterogeneous systems with cell breathing technique. IEEE Systems Journal, 12 (3). pp. 2094-2105. doi:10.1109/JSYST.2017.2733446

Nematollahi, Mohammadreza, Hosseini-Motlagh, Seyyed-Mahdi, Ignatius, Joshua, Goh, Mark and Nia, Mojtaba Saghafi (2018) Coordinating a socially responsible pharmaceutical supply chain under periodic review replenishment policies. Journal of Cleaner Production, 172 . pp. 2876-2891.

Nematollahi, Mohammadreza, Hosseini-Motlagh, Seyyed-Mahdi, Ignatius, Joshua, Goh, Mark and Nia, Mojtaba Saghafi (2018) Coordinating a socially responsible pharmaceutical supply chain under periodic review replenishment policies. Journal of Cleaner Production, 172 . pp. 2876-2891. doi:10.1016/j.jclepro.2017.11.126

Newall, Philip and Parker, Katie N. (2018) Improved mutual fund investment choice architecture. Journal of Behavioral Finance . doi:10.1080/15427560.2018.1464455 (In Press)

Ng, Irene C.L. and Vargo, Stephen L. (2018) Service-dominant (S-D) logic, service ecosystems and institutions: bridging theory and practice. Journal of Service Management, 29 (4). pp. 518-520. doi:10.1108/JOSM-07-2018-412

Nguyen, Khoa Dang, Ha, Cheolkeun, Dinh, Quang Truong and Marco, James (2018) Synchronization controller for a 3-RRR parallel manipulator. International Journal of Precision Engineering and Manufacturing, 19 (3). pp. 339-347. doi:10.1007/s12541-018-0041-z

Nicolaides, Doros, McMahon, Richard A., Cebon, David and Miles, John (2018) A national power infrastructure for charge-on-the-move : an appraisal for Great Britain. IEEE Systems Journal . doi:10.1109/JSYST.2018.2792939 (In Press)

Norman, D. G., Baier, W., Watson, Derrick G., Burnett, B., Painter, M. and Williams, M. A. (2018) Micro-CT for saw mark analysis on human bone. Forensic Science International . doi:10.1016/j.forsciint.2018.10.027 (In Press)

Norman, D. G., Baier, Waltraud, Watson, D.G., Burnett, B., Painter, M. and Williams, M. A. (2018) Micro-CT for saw mark analysis on human bone. Forensic Science International, 293 . pp. 91-100. doi:10.1016/j.forsciint.2018.10.027

Norman, D. G., Watson, Derrick G., Burnett, B., Fenne, P. M. and Williams, M. A. (2018) The cutting edge - Micro-CT for quantitative toolmark analysis of sharp force trauma to bone. Forensic Science International, 283 . pp. 156-172. doi:10.1016/j.forsciint.2017.12.039

Ochieng, Edward Godfrey, Ovbagbedia, Oghenemarho Omaruaye, Abdulai, Raymond, Matipa, Wilfred, Zuofa, Tarila, Ruan, Ximing and Oledinma, Akunna (2018) Utilising a systematic knowledge management based system to optimise project management operations in oil and gas organisation. Information Technology and People, 31 (2). pp. 527-556. doi:10.1108/ITP-08-2016-0198

Oledinma, Akunna and Lu, Qiongyu (2018) The global food governance system. CILT Focus . pp. 38-39.

Ozpolat, Mumin, Kampert, Erik, Jennings, P. A. (Paul A.) and Higgins, Matthew D. (2018) A grid-based coverage analysis of urban mmWave vehicular ad hoc networks. IEEE Communications Letters . doi:10.1109/LCOMM.2018.2846562 (In Press)

Palit, Arnab, Bhudia, Sunil K., Arvanitis, Theodoros N., Turley, Glen A. and Williams, M. A. (2018) In vivo estimation of passive biomechanical properties of human myocardium. Medical & Biological Engineering & Computing, 56 (9). pp. 1615-1631. doi:10.1007/s11517-017-1768-x

Pasco, Corentin, Khan, Muhammad Aurangzeb, Gupta, Jaipal and Kendall, Kenneth N. (2018) Experimental investigation on interply friction properties of thermoset prepreg systems. Journal of Composite Materials . doi:10.1177/0021998318781706

Pasco, Corentin, Khan, Muhammad Aurangzeb and Kendall, Kenneth N. (2018) A novel discrete method of shear angle measurement for in-plane shear properties of thermoset prepreg using a point-tracking algorithm. Journal of Composite Materials . doi:10.1177/0021998318813193

Patel, Anisha N. and Kranz, Christine (2018) (Multi)functional atomic force microscopy imaging. Annual Review of Analytical Chemistry, 11 (1). pp. 329-350. doi:10.1146/annurev-anchem-061417-125716

Patel, Chloe, Karasouli, Eleni, Shuttlewood, Emma and Meyer, Caroline (2018) Food Parenting Practices among Parents with Overweight and Obesity: A Systematic Review. Nutrients, 10 (12). 1966. doi:10.3390/nu10121966

Patel, Chloe, Karasouli, Eleni, Shuttlewood, Emma and Meyer, Caroline (2018) Food parenting practices among parents with overweight and obesity : a systematic review. Nutrients, 10 (12). 1966. doi:10.3390/nu10121966

Patel, Salma, Cain, Rebecca, Neailey, Kevin and Hooberman, Lucy (2018) Public awareness, usage, and predictors for the use of doctor rating websites : cross-sectional study in England. Journal of Medical Internet Research, 20 (7). e243. doi:10.2196/jmir.9523

Payami, Sohail, Ghoraishi, Mir, Dianati, Mehrdad and Sellathurai, Mathini (2018) Hybrid Beamforming With a Reduced Number of Phase Shifters for Massive MIMO Systems. IEEE Transactions on Vehicular Technology, 67 (6). pp. 4843-4851. doi:10.1109/TVT.2018.2807921

Payami, Sohail, Ghoraishi, Mir, Dianati, Mehrdad and Sellathurai , Mathini (2018) Hybrid beamforming with reduced number of phase shifters for massive MIMO systems. IEEE Transactions on Vehicular Technology . doi:10.1109/TVT.2018.2807921 (In Press)

Pitto-Barry, Anaïs, Lupan, Alexandru, Ellingford, Christopher, Attia, Amr A. A. and Barry, Nicolas P. E. (2018) New class of hybrid materials for detection, capture, and “on-demand” release of carbon monoxide. ACS Applied Materials & Interfaces, 10 (16). pp. 13693-13701. doi:10.1021/acsami.8b01776

Plateau, Carolyn R., Bone, Sarah, Lanning, Emily and Meyer, Caroline (2018) Monitoring eating and activity : links with disordered eating, compulsive exercise, and general wellbeing among young adults. International Journal of Eating Disorders, 51 (11). pp. 1270-1276. doi:10.1002/eat.22966

Pogrebna, Ganna (2018) Introduction to FUR XVII special issue. Theory and Decision, 84 (3). pp. 305-309. doi:10.1007/s11238-017-9650-8

Poluektov, Michael, Freidin, Alexander B. and Figiel, Łukasz (2018) Modelling stress-affected chemical reactions in non-linear viscoelastic solids with application to lithiation reaction in spherical Si particles. International Journal of Engineering Science, 128 . pp. 44-62. doi:10.1016/j.ijengsci.2018.03.007

Poluektov, Mikhail, Freidin, Alexander and Figiel, Lukasz (2018) Modelling stress-affected chemical reactions in non-linear viscoelastic solids with application to lithiation reaction in spherical Si particles. International Journal of Engineering Science, 128 . pp. 44-62. doi:10.1016/j.ijengsci.2018.03.007

Powell, Faye, Farrow, Claire, Meyer, Caroline and Haycraft, Emma (2018) The stability and continuity of maternally reported and observed child eating behaviours and feeding practices across early childhood. International Journal of Environmental Research and Public Health, 15 (5). 1017. doi:10.3390/ijerph15051017

Raath, Neill D., Norman, D., McGregor, I., Hepple, S., Dashwood, R. J. and Hughes, Darren J. (2018) Characterization of loading responses and failure loci of a boron steel spot weld. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 49 (5). pp. 1536-1551. doi:10.1007/s11661-018-4502-x

Rahnama, Alireza, Clark, Sam and Sridhar, Seetharaman (2018) Machine learning for predicting occurrence of interphase precipitation in HSLA steels. Computational Materials Science, 154 . pp. 169-177. doi:10.1016/j.commatsci.2018.07.055

Rahnama, Alireza, Clark, Samuel, Janik, Vit and Sridhar, Seetharaman (2018) A phase-field model investigating the role of elastic strain energy during the growth of closely spaced neighbouring interphase precipitates. Computational Materials Science, 142 . pp. 437-443. doi:10.1016/j.commatsci.2017.09.053

Rahnama, Alireza, Kotadia, Hiren, Clark, Samuel, Janik, Vit and Sridhar, Seetharaman (2018) Nano-mechanical properties of Fe-Mn-Al-C lightweight steels. Scientific Reports, 8 . 9065 . doi:10.1038/s41598-018-27345-w

Rajan, Ashwin T., Barai, Anup, Uddin, Kotub, Somerville, Limhi, McGordon, Andrew and Marco, James (2018) Prediction of battery storage ageing and solid electrolyte interphase property estimation using an electrochemical model. Journal of Power Sources, 385 . pp. 141-147. doi:10.1016/j.jpowsour.2018.03.010

Rashid, Muhammad, Sahoo, Asit, Gupta, Amit and Sharma, Yogesh (2018) Numerical modelling of transport limitations in lithium titanate anodes. Electrochimica Acta, 283 . pp. 313-326. doi:10.1016/j.electacta.2018.06.147

Robbins, Tim, Lim Choi Keung, Sarah Niukyun and Arvanitis, Theodoros N. (2018) E-health for active ageing : a systematic review. Maturitas, 114 . pp. 34-40. doi:10.1016/j.maturitas.2018.05.008

Robbins, Tim, Lim Choi Keung, Sarah Niukyun, Sankaranarayanan, Sailesh, Randeva, Harpal S. and Arvanitis, Theodoros N. (2018) Diabetes and the direct secondary use of electronic health records : using routinely collected and stored data to drive research and understanding. Digital Health, 4 . doi:10.1177/2055207618804650

Roberts, Samuel and Kendrick, Emma (2018) The re-emergence of sodium ion batteries : testing, processing, and manufacturability. Nanotechnology, Science and Applications, 11 . pp. 23-33. doi:10.2147/NSA.S146365

Robinson, James B., Heenan, Thomas M.M., Jervis, J. Rhodri, Tan, Chun, Kendrick, Emma, Brett, Dan J.L. and Shearing, Paul R. (2018) Multiscale tomographic analysis of the thermal failure of Na-Ion batteries. Journal of Power Sources, 400 . pp. 360-368. doi:10.1016/j.jpowsour.2018.07.098

Rodrigues, Maradona, McGordon, Andrew, Gest, Graham and Marco, James (2018) Autonomous navigation in interaction-based environments - a case of non-signalised roundabouts. IEEE Transactions on Intelligent Vehicles, 3 (4). pp. 425-438. doi:10.1109/TIV.2018.2873916

Rong, Zhichao, Leeson, Mark S., Higgins, Matthew D. and Lu, Yi (2018) Nano-rectenna powered body-centric nano-networks in the terahertz band. Healthcare Technology Letters, 5 (4). pp. 113-117. doi:10.1049/htl.2017.0034

Rout, Bapin Kumar, Brooks, Geoffrey, Akbar Rhamdhani, M., Li, Zushu, Schrama, Frank N. H. and Overbosch, Aart (2018) Dynamic Model of Basic Oxygen Steelmaking Process Based on Multizone Reaction Kinetics: Modeling of Decarburization. Metallurgical and Materials Transactions B, 49 (3). pp. 1022-1033. doi:10.1007/s11663-018-1244-5

Rout, Bapin Kumar, Brooks, Geoffrey, Rhamdhani, Akbar M., Li, Zushu, Schrama, Frank N. H. and Overbosch, Aart (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : modelling of decarburisation. Metallurgical and Materials Transactions B, 49 (2). 537-557 . doi:10.1007/s11663-017-1166-7

Rout, Bapin Kumar, Brooks, Geoffrey, Rhamdhani, M. Akbar, Li, Zushu, Schrama, Frank N. H. and Knoop, Willem van der (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : modelling of manganese removal. Metallurgical and Materials Transactions B . doi:10.1007/s11663-018-1306-8 (In Press)

Rowshandel, H., Nicholson, G. L., Shen, J. L. and Davis, Claire (2018) Characterisation of clustered cracks using an ACFM sensor and application of an artificial neural network. NDT & E International, 98 . pp. 80-88. doi:10.1016/j.ndteint.2018.04.007

Roy, Rajat K., Dutta, Siuli, Panda, Ashis K., Rajinikanth, V., Das, Swapan K., Mitra, Amitava, Strangwood, M. and Davis, Claire (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (21). pp. 1933-1944. doi:10.1080/14786435.2018.1465241

Roy, Rajat K., Dutta, Siuli, Panda, Ashis K., Rajinikanth, V., Das, Swapan K., Mitra, Amitava, Strangwood, M. and Davis, Claire (2018) Assessment of recovery and recrystallisation behaviours of cold rolled IF steel through non-destructive electromagnetic characterisation. Philosophical Magazine, 98 (21). pp. 1933-1944. doi:10.1080/14786435.2018.1465241

Rubanov, Dmitrij, Nnadi, Matthias and Oledinma, Akunna (2018) The impact of international financial reporting standards on fund performance. Accounting Research Journal, 31 (1). pp. 102-120. doi:10.1108/ARJ-01-2017-0020

Ruggeri, Francesco Simone, Charmet, Jérôme, Kartanas, Tadas, Peter, Quentin, Chia, Sean, Habchi, Johnny, Dobson, Christopher M., Vendruscolo, Michele and Knowles, Tuomas P. J. (2018) Microfluidic deposition for resolving single molecule protein architecture and heterogeneity. Nature Communications, 9 . 3890. doi:10.1038/s41467-018-06345-4

Saar, Kadi Liis, Müller, Thomas, Charmet, Jérôme, Challa, Pavan K. and Knowles, Tuomas P. J. (2018) Enhancing the resolution of micro free flow electrophoresis through spatially controlled sample injection. Analytical Chemistry . doi:10.1021/acs.analchem.8b01205 (In Press)

Sadeghi, Ramtin, Madani, Seyed M., Ataei, Mohammad, Agha Kashkooli, M. R. and Ademi, Sul (2018) Super-twisting sliding mode direct power control of brushless doubly fed induction generator. IEEE Transactions on Industrial Electronics, 65 (11). pp. 9147-9156. doi:10.1109/TIE.2018.2818672

Safa, Nader Sohrabi, Maple, Carsten, Watson, Tim and Von Solms, Rossouw (2018) Motivation and opportunity based model to reduce information security insider threats in organisations. Journal of Information Security and Applications, 40 . pp. 247-257. doi:10.1016/j.jisa.2017.11.001

Santagiuliana, Giovanni, Picot, Olivier T., Crespo, Maria, Porwal, Harshit, Zhang, Han, Li, Yan, Rubini, Luca, Colonna, Samuele, Fina, Alberto, Barbieri, Ettore, Spoelstra, Anne B., Mirabello, Giulia, Patterson, Joseph P., Botto, Lorenzo, Pugno, Nicola M., Peijs, Ton and Bilotti, Emiliano (2018) Breaking the nanoparticle loading–dispersion dichotomy in polymer nanocomposites with the art of croissant-making. ACS Nano, 12 (9). pp. 9040-9050. doi:10.1021/acsnano.8b02877

Schlueter, Steffen, Genieser, Ronny, Richards, Daniel, Hoster, Harry E. and Mercer, Michael P. (2018) Quantifying structure dependent responses in Li-ion cells with excess Li spinel cathodes : matching voltage and entropy profiles through mean field models. Physical Chemistry Chemical Physics, 20 (33). pp. 21417-21429. doi:10.1039/C8CP02989J

Schrock, Lauren (2018) Accounting for play as work in The Expense Account. Qualitative Research in Financial Markets, 10 (3). pp. 254-264. doi:10.1108/QRFM-10-2016-0039

Seifullina, Aziza, Er, Ahmet, Nadeem, Simon Peter, Garza-Reyes, Jose Arturo and Kumar, Vikas (2018) A lean implementation framework for the mining industry. IFAC-PapersOnLine, 51 (11). pp. 1149-1154. doi:10.1016/j.ifacol.2018.08.435

Sellamuthu, Prabhukumar, Samuel, D. G. Harris , Dinakaran, D., Premkumar, V. P., Li, Zushu and Seetharaman, Sridhar (2018) Austempered ductile iron (ADI) : influence of austempering temperature on microstructure, mechanical and wear properties and energy consumption. Metals, 8 (1). 53. doi:10.3390/met8010053

(2018) Anomalous Hall effect in Weyl semimetal half-Heusler compounds RPtBi (R = Gd and Nd). Proceedings of the National Academy of Sciences of the United States of America, 115 (37). pp. 9140-9144. 201810842. doi:10.1073/pnas.1810842115

Shimanovich, U., Pinotsi, D., Shimanovich, K., Yu, N., Bolisetty, S., Adamcik, J., Mezzenga, R., Charmet, Jérôme, Vollrath, F., Gazit, E., Dobson, C. M., Kaminski Schierle, G., Holland, C., Kaminski, C. F. and Knowles, T. P. J. (2018) Biophotonics of native silk fibrils. Macromolecular Bioscience, 18 (4). 1700295. doi:10.1002/mabi.201700295

Slater, Carl, Kostryzhev, Andrii, Marenych, Olexandra and Davis, Claire (2018) Implications of accelerated solidification rates seen in belt casting on precipitation in Nb bearing steels. Steel Research International, 89 (3). 1700358. doi:10.1002/srin.201700358

Smyth, Joseph, Birrell, Stewart A., Mouzakitis, Alexandros and Jennings, P. A. (Paul A.) (2018) Motion sickness and human performance – exploring the impact of driving simulator user trials. Advances in Human Aspects of Transportation. AHFE 2018. Advances in Intelligent Systems and Computing, 786 . pp. 445-457. doi:10.1007/978-3-319-93885-1_40

Sohrabi Safa, Nader , Maple, Carsten, Haghparast, Mahboobeh, Watson, Tim and Dianati, Mehrdad (2018) An opportunistic resource management model to overcome resource-constraint in the Internet of Things. Concurrency and Computation: Practice and Experience . e5014. doi:10.1002/cpe.5014 (In Press)

Sohrabi Safa, Nader , Maple, Carsten, Watson, Tim and Von Solms, Rossouw (2018) Motivation and opportunity based model to reduce information security insider threats in organisations. Journal of Information Security and Applications . doi:10.1016/j.jisa.2017.11.001 (In Press)

Somerville, Limhi, Ferrari, Stefania , Lain, Michael J., McGordon, Andrew, Jennings, Paul. A. and Bhagat, Rohit (2018) An In-Situ Reference Electrode Insertion Method for Commercial 18650-Type Cells. Batteries, 4 (2). p. 18. doi:10.3390/batteries4020018

Song, Pan, Wan, Chaoying, Xie, Yanling, Formela, Krzysztof and Wang, Shifeng (2018) Vegetable derived-oil facilitating carbon black migration from waste tire rubbers and its reinforcement effect. Waste Management, 78 . pp. 238-248. doi:10.1016/j.wasman.2018.05.054

Song, Pan, Wan, Chaoying, Xie, Yanling, Zhang, Zhen and Wang, Shifeng (2018) Stepwise exfoliation of bound rubber from carbon black nanoparticles and the structure characterization. Polymer Testing, 71 . pp. 115-124. doi:10.1016/j.polymertesting.2018.08.032

Sorell, Tom and Whitty, Monica T. (2018) Online romance scams and victimhood. Security Journal . doi:10.1057/s41284-019-00166-w (In Press)

Staliulionis, Z., Conseil-Gudla, H., Ambat, R., Mohanty, S., Hattel, J. H. and Jabbari, M. (2018) Modeling of moisture transport into an electronic enclosure using the resistor-capacitor approach. Journal of Electronic Packaging, 140 (3). doi:10.1115/1.4039790

Sudarsan, C., Banker, K. H., Hazra, S. K. , Bhagat, Rohit and Panda, S. K. (2018) Experimental investigations on forming limit diagram of ultra thin SS 304 steel : effect of circular grid size, sheet orientation, punch size and deformation speed. Advances in Materials and Processing Technologies . doi:10.1080/2374068X.2018.1510679 (In Press)

Taylor, S., Janik, Vit, Grimes, Roger, Mogire, E. and Dashwood, R. J. (2018) Comparison of superplastic forming abilities of as-cast AZ91 magnesium alloy prepared by twin roll casting and WE43 magnesium alloy. Materialwissenschaft und Werkstofftechnik, 49 (10). pp. 1206-1212. doi:10.1002/mawe.201700121

Taylor, T. and Clough, A. (2018) Critical review of automotive hot-stamped sheet steel from an industrial perspective. Materials Science and Technology, 34 (7). pp. 809-861. doi:10.1080/02670836.2018.1425239

Tello, Ghalia, Al-Jarrah, Omar Y., Yoo, Paul D., Al-Hammadi, Yousof, Muhaidat, Sami and Lee, Uihyoung (2018) Deep-structured machine learning model for the recognition of mixed-defect patterns in semiconductor fabrication processes. IEEE Transactions on Semiconductor Manufacturing, 31 (2). pp. 315-322. doi:10.1109/TSM.2018.2825482

Tripathy, Yashraj, McGordon, Andrew and Low, John C. T. (2018) A new consideration for validating battery performance at low ambient temperatures. Energies, 11 (9). 2439. doi:10.3390/en11092439

Truong, Dinh Quang, Marco, J., Greenwood, D., Harper, L., Corrochano, D.G. and Yoon, J.I. (2018) Challenges of micro/mild hybridisation for construction machinery and applicability in UK. Renewable and Sustainable Energy Reviews , 91 . pp. 301-320. doi:10.1016/j.rser.2018.03.027

Tselepy, Ashton, Schiller, Tara L., Harrisson, Simon, Guerrero-Sanchez, Carlos, Moad, Graeme and Keddie, Daniel J. (2018) Effect of scandium triflate on the RAFT copolymerization of methyl acrylate and vinyl acetate controlled by an acid/base “switchable” chain transfer agent. Macromolecules, 51 (2). pp. 410-418. doi:10.1021/acs.macromol.7b02104

Vithani, Neha, Jagtap, Pravin Kumar Ankush, Verma, Sunil Kumar, Tripathi, Ravi, Awasthi, Shalini, Nair, Nisanth N. and Prakash, Balaji (2018) Mechanism of Mg 2+ -accompanied product release in sugar nucleotidyltransferases. Structure, 26 (3). pp. 459-466. doi:10.1016/j.str.2018.02.002

Walasek, Lukasz, Yu, Erica C. and Lagnado, David A. (2018) Endowment effect despite the odds. Thinking & Reasoning, 24 (1). pp. 79-96. doi:10.1080/13546783.2017.1381163

Wan, Chaoying, Heeley, Ellen L., Zhou, Yutao, Wang, Shifeng, Cafolla, Conor T., Crabb, Eleanor M. and Hughes, Darren J. (2018) Stress-oscillation behaviour of semi-crystalline polymers : the case of poly(butylene succinate). Soft Matter, 14 (45). pp. 9175-9184. doi:10.1039/c8sm01889h

Wang, Chao, Cheng, Kai, Rakowski, Richard and Soulard, Juliette (2018) An experimental investigation on ultra-precision instrumented smart aerostatic bearing spindle applied to high speed micro-drilling. Journal of Manufacturing Processes, 31 . pp. 324-335. doi:10.1016/j.jmapro.2017.11.022

Wang, Fei, Davis, Claire and Strangwood, Martin (2018) Grain growth behaviour on reheating Al-Nb containing steel in the homogenised condition. Materials Science and Technology, 34 (5). pp. 587-595. doi:10.1080/02670836.2017.1410931

Wang, Hongwei, Liu, Yufan, Chen, Ling, Li, Xiaoxi, Wang, Jun and Xie, Fengwei (2018) Insights into the multi-scale structure and digestibility of heat-moisture treated rice starch. Food Chemistry, 242 . pp. 323-329. doi:10.1016/j.foodchem.2017.09.014

Wang, Junjie, Mu, Mulan and Liu, Yongliang (2018) Recycled cement. Construction and Building Materials, 190 . pp. 1124-1132. doi:10.1016/j.conbuildmat.2018.09.181

Wang, Xinrui, Shang, Xiaoqin, Liu, Peng, Xie, Fengwei, Xiao, Tingyu, Song, Shanshan and Gong, Zhe (2018) Kinetic modeling of palmitamidopropyl betaine synthesis. Journal of Surfactants and Detergents, 21 (5). pp. 647-655. doi:10.1002/jsde.12156

Wang, Xuefeng, Yang, Fang, Lu, Dawei, Fernández-Martínez, Manuel and Guirao, Juan L.G. (2018) Multi-objective location-routing problem with simultaneous pickup and delivery for urban distribution. Journal of Intelligent & Fuzzy Systems, 35 (4). pp. 3987-4000. doi:10.3233/JIFS-169721

Wang, Y. Q., Clark, Samuel, Janik, Vit, Heenan, R. K., Venero, D. Alba, Yan, K., McCartney, D. G., Sridhar, S. and Lee, P. D. (2018) Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering. Acta Materialia, 145 . pp. 84-96. doi:10.1016/j.actamat.2017.11.032

Wang, Yanfei, Yu, Long, Xie, Fengwei, Li, Sheng, Sun, Qingjie, Liu, Hongsheng and Chen, Ling (2018) On the investigation of thermal/cooling-gel biphasic systems based on hydroxypropyl methylcellulose and hydroxypropyl starch. Industrial Crops and Products, 124 . pp. 418-428. doi:10.1016/j.indcrop.2018.08.010

Whitty, Monica T. (2018) Do you love me? Psychological characteristics of romance scam victims. Cyberpsychology, Behavior and Social Networking, 21 (2). pp. 105-109. doi:10.1089/cyber.2016.0729

Whitty, Monica T. (2018) It’s just a game : developing a framework to understand cyberfraud from a Nigerian cultural perspective. International Journal of Cyber Criminology . (In Press)

Wilson, Paul, Smith, M. P., Hay, J., Warnett, Jason M., Attridge, Alex and Williams, M. A. (2018) X-ray computed tomography (XCT) and chemical analysis (EDX and XRF) used in conjunction for cultural conservation: the case of the earliest scientifically described dinosaur Megalosaurus bucklandii. Heritage Science, 6 (1). 58. doi:10.1186/s40494-018-0223-0

Wilson, Paul, Stott, Janet, Warnett, Jason M., Attridge, Alex, Smith, M. Paul and Williams, M. A. (2018) Evaluation of touchable 3D-printed replicas in museums. Curator: The Museum Journal, 60 (4). pp. 445-465. doi:https://doi.org/10.1111/cura.12244

Wilson, Paul, Stott, Janet, Warnett, Jason M., Attridge, Alex, Smith, M. Paul and Williams, M. A. (2018) Museum visitor preference for the physical properties of 3D printed replicas. Journal of Cultural Heritage . doi:10.1016/j.culher.2018.02.002 (In Press)

Windsor, Rebecca, Cinelli, Marco and Coles, Stuart R. (2018) Comparison of tools for the sustainability assessment of nanomaterials. Current Opinion in Green and Sustainable Chemistry, 12 . pp. 69-75. doi:10.1016/j.cogsc.2018.06.010

Worwood, Daniel, Algoo, R., McGlen, Ryan, Greenwood, David G. and Marco, James (2018) A study into different cell-level cooling strategies for cylindrical lithium-ion cells in automotive applications. International Journal of Powertrains, 7 (1/2/3). pp. 199-266. doi:10.1504/IJPT.2018.10009584

Wu, Yingwei, Grant, Patrick S. and Isakov, Dmitry (2018) 3D-printed λ/4 phase plate for broadband microwave applications. Optics Express, 26 (22). pp. 29068-29073. doi:10.1364/OE.26.029068

Xia, Lu, Huang, Zhonghang, Zhong, Lei, Xie, Fengwei, Tang, Chak and Tsui, Chi Pong (2018) Bagasse cellulose grafted with an amino-terminated hyperbranched polymer for the removal of Cr(VI) from aqueous solution. Polymers, 10 (8). 931. doi:10.3390/polym10080931

Ye, Wenye, Efthymiadis, Panagiotis, Pinna, Christophe, Ma, Anxin, Shollock, Barbara A. and Dashwood, R. J. (2018) Experimental and modelling study of fatigue crack initiation in an aluminium beam with a hole under 4-point bending. International Journal of Solids and Structures . doi:10.1016/j.ijsolstr.2018.01.001

Yuan, Hu, Maple, Carsten, Chen, Chao and Watson, Tim (2018) Cross-device tracking through identification of user typing behaviours. Electronics Letters, 54 (15). pp. 957-959. doi:10.1049/el.2018.0893 (In Press)

Zhang, Cheng, Allafi, Walid, Dinh, Quang Truong, Ascencio Ormeno, Pedro and Marco, James (2018) Online estimation of battery equivalent circuit model parameters and state of charge using decoupled least squares technique. Energy, 142 . pp. 678-688. doi:10.1016/j.energy.2017.10.043

Zhang, Hengliang, Hua, Wei and Wu, Zhongze (2018) Modular Spoke-Type Permanent-Magnet Machine for In-Wheel Traction Applications. IEEE Transactions on Industrial Electronics, 65 (10). pp. 7648-7659. doi:10.1109/TIE.2018.2803724

Zhang, Tianlong, Elma, Muthia, Xie, Fengwei, Motuzas, Julius, Zhang, Xiwang and Wang, David K. (2018) Rapid thermally processed hierarchical titania-based hollow fibres with tunable physicochemical and photocatalytic properties. Separation and Purification Technology, 206 . pp. 99-106. doi:10.1016/j.seppur.2018.05.063

Zhang, Tianlong, Xie, Fengwei, Motuzas, Julius, Bryant, Peter, Kurusingal, Valsala, Colwell, John M. and Laycock, Bronwyn (2018) Early-stage photodegradation of aromatic poly(urethane-urea) elastomers. Polymer Degradation and Stability, 157 . pp. 181-198. doi:10.1016/j.polymdegradstab.2018.09.020

Zhao, Shuo, Ge, Yangyang, Ma, Liang, Yan, Tao, Lyu, Jingcai and Li, Zushu (2018) Formation analysis of edge cracks of 33MnCrTiB fork steel. Metals, 8 (8). 587. doi:10.3390/met8080587

Zheng, W., Schönemann, R., Aryal, N., Zhou, Q., Rhodes, D., Chiu, Y.-C., Chen, K.-W., Kampert, Erik, Förster, T., Martin, T. J., McCandless, G. T., Chan, J. Y., Manousakis, E. and Balicas, L. (2018) Detailed study of the Fermi surfaces of the type-II Dirac semimetallic candidates XTe2 (X =Pd, Pt). Physical Review B (Condensed Matter and Materials Physics), 97 (23). 235154. doi:10.1103/PhysRevB.97.235154

Zhou, Weibin, Lu, Mingyang, Chen, Ziqi, Zhou, Lei, Yin, Liyuan, Zhao, Qian, Peyton, Anthony, Li, Yu and Yin, Wuliang (2018) Three-Dimensional Electromagnetic Mixing Models for Dual-Phase Steel Microstructures. Applied Sciences, 8 (4). 529. doi:10.3390/app8040529

Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2018) Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion. Additive Manufacturing, 24 . pp. 552-559. doi:10.1016/j.addma.2018.10.040

Book Item

Despotou, George, Korkontzelos, Ioannis, Matragkas, Nicholas, Bilici, Eda and Arvanitis, Theodoros N. (2018) Structuring clinical decision support rules for drug safety using natural language processing. In: Hasman, Arie and Gallos, Parisis and Liaskos, Joseph and Househ, Mowafa S. and Mantas, John , (eds.) Data, informatics and technology : an inspiration for improved healthcare. Studies in Health Technology and Informatics, 251 . I O S Press, pp. 89-92. ISBN 9781614998792

Elliott, Mark T., Ward, Dominic , Stables, Ryan , Fraser, Dagmar , Jacoby, Nori and Wing, Alan M. (2018) Analysing multi-person timing in music and movement : event based methods. In: Vatakis, Argiro and Balcı, Fuat and Di Luca, Massimiliano and Correa, Ángel , (eds.) Timing and Time Perception : Procedures, Measures, and Applications. Brill, pp. 177-215. ISBN 9789004280205

Lee, Geraldine, Epiphaniou, Gregory, Al-Khateeb, Haider and Maple, Carsten (2018) Security and privacy of things : regulatory challenges and gaps for the security integration of cyber-physical systems ICICT. In: Yang, X. S. and Sherratt , S. and Dey , N. and Joshi , A., (eds.) Third International Congress on Information and Communication Technology. Advances in Intelligent Systems and Computing , 797 . Singapore: Springer. ISBN 9789811311659

Lee, S. Y., Lim, M. K., Food, D. and Hu, J. (2018) Increasing Rate of Diffusion of Innovation in Supply Chain: Targeting the Early Adopters in UK Supply Chain. In: Advances in Production Management Systems. Smart Manufacturing for Industry 4.0. IFIP Advances in Information and Communication Technology (IFIPAICT, volume 536), 536 . Springer, pp. 209-214. ISBN 9783319997063

Ng, Irene C. L., Maglio, Paul, Spohrer, Jim and Wakenshaw, Susan Y. L. (2018) The study of service : from systems to ecosystems to ecology. In: Vargo, Stephen L. and Lusch, Robert F. , (eds.) The SAGE Handbook of Service-Dominant Logic. Research Methods & Evaluation . London: Sage Publications Ltd.. ISBN 9781526402837 (In Press)

Ng, Irene C. L. and Wakenshaw, Susan Y. L. (2018) Service ecosystems : a timely worldview for a connected, digital and data-driven economy. In: Vargo, Stephen L. and Lusch, Robert F. , (eds.) The SAGE Handbook of Service-Dominant Logic. Research Methods & Evaluation . London: Sage Publications Ltd.. ISBN 9781526402837 (In Press)

Ulahannan, Arun, Cain, Rebecca, Dhadyalla, Gunwant, Jennings, P. A. (Paul A.), Birrell, Stewart A., Waters, Mike and Mouzakitis, Alexandros (2018) Using the Ideas Café to explore trust in autonomous vehicles. In: Ho, A., (ed.) Advances in Human Factors in Communication of Design. Springer, pp. 3-14. ISBN 9783319938875

Conference Item

Abbott, Michael D., Yang, Chek P. and Jennings, Paul A. (2018) Investigation of the Interoperability of a Dynamic WPT Pickup with Multiple Source Track Designs. In: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC) , Belfort, France, 11-14 Dec. 2017 pp. 1-6. doi:10.1109/VPPC.2017.8330960

Allen, A. J. and Davies, Joe (2018) Primary school pupils go motor-racing : improving stem engagement through an interactive engineering project. In: 11th annual International Conference of Education, Research and Innovation Dates, Seville, Spain, 12-14 Nov 2018. Published in: ICERI2018 Proceedings pp. 6858-6866. ISBN 9788409059485. ISSN 2340-1095. doi:10.21125/iceri.2018.2637

Allen, A. J. and Donzella, Valentina (2018) Maintaining the pace : designing technical post-graduate courses for the 21st century automotive industry. In: 11th annual International Conference of Education, Research and Innovation Dates, Seville, Spain, 12-14 Nov 2018. Published in: ICERI2018 Proceedings pp. 6847-6853. ISBN 9788409059485. ISSN 2340-1095. doi:doi:10.21125/iceri.2018.2635

Allen, A. J. and Moore, Andrew D. (2018) “Battery EV ScaleX” - Scalextric slot-cars for student led exploration of battery electric vehicle phenomena. In: HEA STEM Conference 2018, Newcastle Upon Tyne, 1 Feb 2018

Assad, Fadi, Rushforth, Emma, Ahmad, Mus'ab, Ahmad, Bilal and Harrison, Robert (2018) An Approach of Optimising S-curve Trajectory for a Better Energy Consumption. In: 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE) , Munich, Germany, 20-24 Aug. 2018 pp. 98-103. doi:10.1109/COASE.2018.8560587

Babu, Vivek Suresh, Oliveira, Luis, Birrell, Stewart A., Taylor, Andy and Cain, Rebecca (2018) Comparison of E-ink and OLED screens as train seat displays : a user study. In: INTSYS - Intelligent Transport Systems - From research and development to the market uptake, Helsinki, Finland, 29-30 Nov 2017. Published in: Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 222 ISBN 9783319937106. ISSN 1867-8211. doi:10.1007/978-3-319-93710-6_30

Chakrapani Rao, Arun (2018) More automated formal methods?! : If so, why, where & how? In: Automated Formal Methods Workshop 2017, in association with 9th NASA Formal Methods Symposium (NFM) 2017, Moffett Field, California, USA, 19-20 May 2017 . Published in: Proceedings of Automated Formal Methods (AFM) 2017, in association with 9th NASA Formal Methods Symposium (NFM) 2017, 5 pp. 50-62. ISSN 2515-1762. doi:10.29007/k317

Chakuu, Sumeer, Masi, Donato and Godsell, Janet (2018) Enablers and inhibitors for the adoption of supply chain finance by logistics service providers. In: 25th Annual EurOMA conference, Budapest, Hungary, 24-26 Jun 2018

Chakuu, Sumeer, Masi, Donato and Godsell, Janet (2018) Exploring the role of logistics service provider in supporting the supply chain strategy using supply chain finance instruments. In: 25th Annual EurOMA Conference, Budapest, Hungary, 24-26 Jun 2018

Chen, Chao, Lee, Sang Woo, Watson, Tim, Maple, Carsten and Lu, Yi (2018) ATHENA : a pagerank-based scheme to solve the thundering herd in authentication. In: 2018 IEEE Vehicular Networking Conference (VNC), Taipei, Taiwan, 05-07 Dec 2018 pp. 1-4. ISBN 9781538694299. ISSN 2157-9857 . doi:10.1109/VNC.2018.8628353

Chen, Chao, Lee, Sang Woo, Watson, Tim, Maple, Carsten and Lu, Yi (2018) CAESAR : A criticality-aware ECDSA signature verification scheme with Markov Model. In: 2017 IEEE Vehicular Networking Conference (VNC), Torino, Italy, 27-29 Nov 2017. Published in: 2017 IEEE Vehicular Networking Conference (VNC) ISSN 2157-9865. doi:10.1109/VNC.2017.8275638

Chinchilla Adell, Raul Francisco, Burkinshaw, Michael, Lindsay, Martin, Proprentner, Daniela and Shollock, Barbara A. (2018) The tribological performance of coated and non-coated materials in high temperature environments. In: 13th International Conference on Turbochargers and Turbocharging, London, UK, 16-17 May 2018

Das, Abhishek, Li, Dezhi, Williams, D. K. and Greenwood, David (2018) Joining technologies for automotive battery systems manufacturing. In: The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, Germany, 9-11 Oct 2017. Published in: World Electric Vehicle Journal, 9 (2). ISBN 9781510863705. ISSN 2032-6653. doi:10.3390/wevj9020022

Dinh, Quang Truong, Bui, Truong Minh Ngoc, Marco, James and Watts, Chris (2018) Optimal control and real-time simulation of hybrid marine power plants. In: 14th International Naval Engineering Conference and Exhibition 2018, Glasgow, UK, 2-4 Oct 2018

Dinh, Truong Quang, Iwasaki, Makoto, Yoon, Jong Il, Senatore, Adolfo and Kang, Myeong Cheol (2018) Predictive Sliding Mode Tracking Control for a Class of SISO Systems. In: 44th Annual Conference of the IEEE Industrial Electronics Society , Washington, DC, USA, 21-23 Oct 2018 . Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society pp. 4545-4551. doi:10.1109/IECON.2018.8592868

Fatania, Tejal (2018) Institutional complexity and institutional logics : much achieved but more to be done. In: 21st Annual Dilemmas for Human Services International Research Conference, University of Northampton, UK, 10-11 Sept 2018

Gillam, Lee, Katsaros, Konstantinos, Dianati, Mehrdad and Mouzakitis, Alexandres (2018) Exploring edges for connected and autonomous driving. In: Exploring edges for connected and autonomous driving , Honolulu, HI, USA, April 15-19 pp. 148-153. doi:10.1109/INFCOMW.2018.8406890

Grandjean, Thomas R. B., McGordon, Andrew and Widanage, Widanalage D. (2018) Innovative Method for Simultaneous Electrical and Thermal Parametrisation of Automotive Batteries. In: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC) , Belfort, France, 11-14 December 2017 . Published in: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC) pp. 1-6. ISBN 9781538613184 . doi:10.1109/VPPC.2017.8330945

Grandjean, Thomas R. B., McGordon, Andrew and Widanage, Widanalage Dhammika (2018) Innovative method for simultaneous electrical and thermal parametrisation of automotive batteries. In: Vehicle Power and Propulsion Conference (VPPC), 2017 IEEE, Belfort, France, 11-14 Dec 2017. Published in: Vehicle Power and Propulsion Conference (VPPC), 2017 IEEE ISBN 9781538613177. doi:10.1109/VPPC.2017.8330945

Grandjean, Thomas R. B., Taylor, J. E., McGordon, Andrew and Marco, James (2018) Improved sizing calculator for rapid optimisation of pack configuration at early-stage automotive product development. In: 2018 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, USA, 27–30 Aug 2018. Published in: Proceedings of 2018 IEEE Vehicle Power and Propulsion Conference (VPPC) (In Press)

Groenewald, Jakobus, Marco, James and Grandjean, Thomas R. B. (2018) Investigation of pre-conditioning strategies that enable state-of-health improvement for a remanufactured Li-ion battery in automotive circular economy applications. In: WCX™18: SAE World Congress Experience, Detroit, Michigan, USA, 10-12 Apr 2018. Published in: SAE Technical Papers, 1 ISSN 0148-7191. doi:10.4271/2018-01-0444 (In Press)

Harrison, Robert, Friedli, Thomas, Vera, Daniel A., Budde, Lukas, Kaniappan Chinnathai, Malarvizhi, Alkan, Bugra, Ahmad, Mussawar and Kohr, Dominik (2018) Proposing a Holistic Framework for the Assessment and Management of Manufacturing Complexity through Data-centric and Human-centric Approaches. In: 3rd International Conference on Complexity, Future Information Systems and Risk , Funchal, Madeira, Portugal, 20-21 March 2018. Published in: Proceedings of the 3rd International Conference on Complexity, Future Information Systems and Risk - Volume 1: COMPLEXIS, 1 pp. 86-93. ISBN 9789897582974 . doi:10.5220/0006692000860093

Hu, Borong, Konaklieva, Sylvia, Ran, Li, Kourra, Nadia, Williams, Mark A., Lai, Wei and Mawby, Philip. A. (2018) Long term reliability of power modules with low amplitude thermomechanical stresses and initial defects. In: 2018 IEEE Energy Conversion Congress and Exposition (ECCE), Portland, OR, USA, 23 - 27 Sep 2018. Published in: 2018 IEEE Energy Conversion Congress and Exposition (ECCE) ISBN 9781479973125. doi:10.1109/ECCE.2018.8558137

Hui, Xia, He, Ligang, Wang, Bin, Chang, Cheng, Han, Xie and Maple, Carsten (2018) Developing offloading-enabled application development frameworks for android mobile devices. In: The 20th IEEE International Conference on High Performance Computing and Communications (HPCC-2018) , Exeter, UK, 28-30 Jun 2018 (In Press)

Ivanov, Ivan V., Maple, Carsten, Watson, Tim and Lee, S. (2018) Cyber security standards and issues in V2X communications for Internet of Vehicles. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, IET London, Savoy Place, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 ISBN 9781785618437. doi:10.1049/cp.2018.0046

Jbair, Mohammad, Ahmad, Bilal, Ahmad, Mus'ab and Harrison, Robert (2018) Industrial cyber physical systems : a survey for control-engineering tools. In: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), St. Petersburg, Russia, 15-18 May 2018 pp. 270-276. ISBN 9781538665329. doi:10.1109/ICPHYS.2018.8387671

Jones, Richard W. and Despotou, Georgios (2018) Transparent representation of safety activities in a patient care pathway. In: 2018 13th IEEE Conference on Industrial Electronics and Applications (ICIEA) , Wuhan, China, 31 May - 2 June 2018 pp. 2192-2197. doi:10.1109/ICIEA.2018.8398074

Keller, Alexander, Meyer, Johannes, Colombo, Armando Walter and Harrison, Robert (2018) Enhancing the behaviour of System of Cyber-Physical Systems through environment parameters. In: 44th Annual Conference of the IEEE Industrial Electronics Society , Washington, DC, USA, 21-23 Oct 2018 . Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society pp. 2884-2889. doi:10.1109/IECON.2018.8592711

Kelmelis, Eric J., Harris, Nathan A., Downey, George A. and Karr, Brian A. (2018) Electro-optical tracking considerations III. In: SPIE Defense + Security 2018 , Orlando, Florida, United States, 10-13 September 2018. Published in: Proceedings Volume 10650, Long-Range Imaging III, 10650 doi:10.1117/12.2304796

Khan, Mohammed Omar, Lim Choi Keung, Sarah Niukyun, Quenby, Siobhan, Coomarasamy, Arri and Arvanitis, Theodoros N. (2018) Design considerations for tools supporting multi-centre clinical trials. In: AMIA 2018 Informatics Summit, San Francisco, USA, 12-15 Mar 2018 (In Press)

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, P. A. (Paul A.) (2018) The science of testing : an automotive perspective. In: SAE World Congress Experience, WCX 2018, Detroit, United States, 10-12 April 2018. Published in: SAE Technical Papers, 2018 ISSN 0148-7191. doi:10.4271/2018-01-1070

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dibling, Greg, McLoughlin, James, Muirhead-Allwood, Sarah, King, Richard and Williams, M. A. (2018) Non-destructive examination of additive manufactured acetabular hip prosthesis cups. In: SPIE 10763 Optics and Photonics, San Diego, CA, 19-23 Aug 2018. Published in: Proceedings of SPIE - International Society for Optical Engineering (107630F). ISSN 0277-786X. doi:10.1117/12.2321055

Le, Anhtuan, Maple, Carsten and Watson, Tim (2018) A profile-driven dynamic risk assessment framework for connected and autonomous vehicles. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, London, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 pp. 1-8. ISBN 9781785618437. doi:10.1049/cp.2018.0020

Lu, Yi, Maple, Carsten, Sheik, Al Tariq, Alhagagi, Hussam A., Watson, Tim, Dianati, Mehrdad and Mouzakitis, Alexandros (2018) Analysis of cyber risk and associated concentration of research (ACR)² in the security of vehicular edge clouds. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, London, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 pp. 1-11. ISBN 9781785618437. doi:10.1049/cp.2018.0019

Maple, Carsten and Jackson, Jack (2018) Selecting effective blockchain solutions. In: Euro-Par 2018: Euro-Par 2018: Parallel Processing Workshops, 25 Oct 2018. Published in: European Conference on Parallel Processing, 11339 pp. 392-403. ISBN 9783030105488. doi:10.1007/978-3-030-10549-5_31

Melo, Miguel, Bouatouch, Kadi, Bessa, Maximino, Coelho, Hugo , Cozot, Remi and Chalmers, Alan (2018) Tone mapping HDR panoramas for viewing in Head Mounted Displays. In: GRAPP 2018, Madiera, 27-29 Jan 2018. Published in: Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 1 pp. 232-239. ISBN 9789897582875. doi:10.5220/0006615402320239

Middleton, Bethany J., Couling, Kevin, Dallmann, Robert, Goodship, Vannessa and Charmet, Jérôme (2018) Low-cost injection moulding strategies for the fabrication of organ on a chip devices. In: BioMedEng18, London, 6-7 Sep 2018. Published in: BioMedEng18 p. 269. ISBN 9781999646509.

Monkhouse, Helen, Habli, Ibrahim, McDermid, John, Khastgir, Siddartha and Dhadyalla, Gunwant (2018) Why functional safety experts worry about automotive systems having increasing autonomy. In: 2017 IEEE SmartWorld Ubiquitous Intelligence and Computing, Advanced and Trusted Computed, Scalable Computing and Communications, Cloud and Big Data Computing, Internet of People and Smart City Innovation,, San Francisco, 4th-8th April 2017 pp. 1-6. doi:10.1109/UIC-ATC.2017.8397595

Mäkiö-Marusik, Elena, Ahmad, Bilal, Harrison, Robert, Makio, Juho and Walter, Armando (2018) Competences of cyber physical systems engineers — Survey results. In: 2018 IEEE Industrial Cyber-Physical Systems (ICPS), St. Petersburg, Russia, 15-18 May 2018. Published in: 2018 IEEE Industrial Cyber-Physical Systems (ICPS) pp. 491-496. ISBN 9781538665329. doi:10.1109/ICPHYS.2018.8390754

Oliveira, Luis, Bradley, Callum, Birrell, Stewart A., Tinworth, Neil, Davies, Andrew and Cain, Rebecca (2018) Using passenger personas to design technological innovation for the rail industry. In: INTSYS - Intelligent Transport Systems - From research and development to the market uptake, Helsinki, Finland, 29-30 Nov 2017. Published in: Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 222 ISBN 9783319937090. doi:10.1007/978-3-319-93710-6

Oliveira, Luis, Luton, Jacob, Iyer, Sumeet, Burns, Chris G., Mouzakitis, Alexandros, Jennings, P. A. (Paul A.) and Birrell, Stewart A. (2018) Evaluating how interfaces influence the user interaction with fully autonomous vehicles. In: AutomotiveUI '18 : 10th International ACM Conference on Automotive User Interfaces and Interactive Vehicular Applications, Toronto, Canada, 23-25 Sep 2018. Published in: AutomotiveUI '18 Proceedings of the 10th International Conference on Automotive User Interfaces and Interactive Vehicular Applications pp. 320-331. doi:10.1145/3239060.3239065

Perelló-March, Jaume R., García-Quinteiro, Eva and Birrell, Stewart A. (2018) Haptic Feedback in Eco Driving Interfaces for Electric Vehicles: Effects on Workload and Acceptance. In: Haptic Feedback in Eco Driving Interfaces for Electric Vehicles: Effects on Workload and Acceptance, 825 pp. 679-692. ISSN 2194-5357. doi:10.1007/978-3-319-96068-5_73

Puik, E. C. N., Puik, Erik, Ceglarek, Dareks, Foley, J. T., Cochran, D. S. and Betasolo, M. L. (2018) Application of axiomatic design for agile product development. In: The 12th International Conference on Axiomatic Design (ICAD 2018). Published in: MATEC Web of Conferences, 223 ISSN 2261-236X. doi:10.1051/matecconf/201822301004

Rajan, Ashwin T., McGordon, Andrew and Marco, James (2018) Prediction of cyclic ageing and storage ageing in a lithium ion battery using an electrochemical model. In: 15th Symposium on Modeling and Experimental Validation of Electrochemical Energy Devices (ModVal 2018) , Aarau, Switzerland, 12-13 Apr 2018. Published in: 15th Symposium on Modeling and Validation of Electrochemical Energy Devices. ModVal 2018 Book of Abstracts pp. 119-120.

Rajan, Ashwin T., McGordon, Andrew and Marco, James (2018) Prediction of storage ageing in a lithium ion battery using data-driven model and electrochemical model. In: UKES2018- UK Energy storage conference 2018, Newcastle, UK, 20-22 Mar 2018 (Unpublished)

Ren, Yaxing, Truong, Dinh Quang, Marco, James, Greenwood, David G. and Hessar, Changiz (2018) Nonlinearity compensation based tilting controller for electric narrow tilting vehicles. In: IEEE International Conference on Control, Decision and Information Technologies, Thessaloniki, Greece, 10-13 Apr 2018 (In Press)

Ridge, Alex, Ademi, Sul, McMahon, Richard A. and Kelly, H-P. (2018) A novel axial flux permanent magnet generator for wind turbines. In: PEMD 2018, Liverpool, UK, 17-19 Apr 2018 (In Press)

Rout, Bapin Kumar, Brooks, G., Rhamdhani, M. A., Li, Zushu and van der Knoop, W. (2018) The behavior of manganese in oxygen steelmaking. In: AISTech 2018 - The Iron & Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018

Rout, Bapin Kumar, Brooks, G. A., Li, Zushu, Rhamdhani, A., Schrama, Frank N. H. and Overbosch, A. (2018) Dynamic modelling of BOF process : comparison of model performance with the plant data. In: AISTech 2018 - The Iron and Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018

Saniee, Nessa Fereshteh , Reynolds, Neil and Kendall, Kenneth N. (2018) Cryomilling : a critical step for accurate determination of degree of cure and resin content in carbon fibre reinforced thermosetting composites. In: Thermosetting Resins, Berlin, Germany, 25-27 Sep 2018. Published in: Proceedings of the Thermosetting Resins 2018 Conference, 25-27 September 2018, Berlin, Germany pp. 71-73. ISBN 9783000608278.

Savioli, N., Vieira, M. S., Lamata, P. and Montana, G. (2018) Automated segmentation on the entire cardiac cycle using a deep learning work-flow. In: 2018 Fifth International Conference on Social Networks Analysis, Management and Security (SNAMS), Valencia, Spain, 15 Oct - 18 Oct 2018 doi:10.1109/SNAMS.2018.8554962

Sheng, Zhengguo, Ozpolat, Mumin, Tian, Daxin, Leung, Victor and Nekovee, Maziar (2018) Worst-Case Access Delay of HomePlug Green PHY (HPGP) for Delay-Critical In-Vehicle Applications. In: IEEE GLOBECOM, Singapore, 4-8 December 2017 . Published in: GLOBECOM 2017 - 2017 IEEE Global Communications Conference pp. 1-6. ISBN 9781509050192 . doi:10.1109/GLOCOM.2017.8254468

Tammaro, Loredana, Di Luccio, Tiziana, Borriello, Carmela, Loffredo, Fausta, Ramachandran, Karthik, Villani, Fulvia, Di Benedetto, Francesca, Schiller, Tara L., Minarini, Carla and Kornfield, Julia A. (2018) Effect of tungsten disulfide (WS2) nanotubes on structural, morphological and mechanical properties of poly(L-lactide) (PLLA) films. In: 9th International Conference on Times of Polymers and Composites: From Aerospace to Nanotechnology, Ischia, Naples, 17th -21st June 2018, 1981 020073. ISSN 0094-243X. doi:10.1063/1.5045935

Thornby, John Albert, Gillie, Martin, Pecchia, Leandro, Tuersley, Ian and Kitson, Russ (2018) Authentic assessment in STEM. In: Education Conference 2018, University of Warwick, 15 May 2018 (Unpublished)

Truong, M. N. B., Truong, Dinh Quang, Marco, James and Watts, Chris (2018) An energy management strategy for DC hybrid electric propulsion system of marine vessels. In: IEEE International Conference on Control, Decision and Information Technologies, Thessaloniki, Greece, 10-13 Apr 2018. Published in: 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT) ISBN 9781538650646. doi:10.1109/CoDIT.2018.8394785

Wakenshaw, Susan Y. L., Maple, Carsten, Schraefel, MC, Gomer, Richard and Ghirardello, Kevin (2018) Mechanisms for meaningful consent in internet of things living in the internet of things. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, IET London, Savoy Place, 28-29 Mar 2018 ISBN 9781785618437.

Wang, Jianguo, Wang, Jihong and McMahon, Richard A. (2018) Dynamic Power System Modeling for the Integration of Energy Storage. In: 44th Annual Conference of the IEEE Industrial Electronics Society , Washington, DC, USA , 21-23 Oct 2018 . Published in: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society pp. 1765-1770. doi:10.1109/IECON.2018.8591607

Worwood, Daniel, Kellner, Quirin, Hosseinzadeh, Elham, Mullen, David, Greenwood, David, Marco, James, McGlen, Ryan and Lynn, Kevin (2018) Thermal analysis of fin cooling large format automotive lithium-ion pouch cells. In: IEEE Vehicle Power and Propulsion Conference, Belfort, France, 11-14 Dec 2017. Published in: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC) ISBN 9781538613177. doi:10.1109/VPPC.2017.8330874

Yang, C. P., Dhadyalla, Gunwant, Marco, James and Jennings, P. A. (Paul A.) (2018) The effect of time-between-events for sequence interaction testing of a real-time system. In: 7th International Workshop on Combinatorial Testing (IWCT 2018), Vasteras, Sweden, 9-13 Apr 2018. Published in: 2018 IEEE International Conference on Software Testing, Verification and Validation Workshops (ICSTW) ISBN 9781538663523. doi:10.1109/ICSTW.2018.00069

Yao, Fengjia, Keller, Alexander, Ahmad, Mussawar, Ahmad, Bilal, Harrison, Robert and Colombo, Armando Walter (2018) Optimizing the Scheduling of Autonomous Guided Vehicle in a Manufacturing Process. In: 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) , Porto, Portugal, 18-20 July 2018 . Published in: 2018 IEEE 16TH INTERNATIONAL CONFERENCE ON INDUSTRIAL INFORMATICS (INDIN) pp. 264-269. doi:10.1109/INDIN.2018.8471979

Yuan, Hu, Maple, Carsten and Ghirardello, Kevin (2018) Dynamic route selection for vehicular store-carry-forward networks and misbehaviour vehicles analysis. In: 2018 IEEE 88th Vehicular Technology Conference: VTC2018-Fall, Chicago, USA, 27–30 Aug 2018 (In Press)

Zabihi, Nima, Mumtaz, A., Logan, T., McMahon, R. A. and Daranagama, T. (2018) High voltage silicon carbide power devices for energy conversion applications. In: 2018 IET 9th International Conference on Power Electronics, Machines & Drives (PEMD), Liverpool, 17-18 Apr 2018 (Unpublished)

Zabihi, Nima, Mumtaz, Asim, Logan, Tom, Daranagama, Thilini and McMahon, Richard A. (2018) SiC power devices for applications in hybrid and electric vehicles. In: European Conference on Silicon Carbide and Related Materials (ECSCRM 2018), Birmingham, 2-6 Sep 2018

Zhang, Jiayi, Ahmad, Bilal, Vera, Daniel A. and Harrison, Robert (2018) Automatic data representation analysis for reconfigurable systems integration. In: IEEE 16th International Conference on Industrial Informatics (INDIN), Porto, Portugal, 18-20 Jul 2018. Published in: 2018 IEEE 16th International Conference on Industrial Informatics (INDIN) pp. 1033-1038. doi:10.1109/INDIN.2018.8472034

Zhang , Cheng, Marco, James and Yu , Tung Fai (2018) Hardware platform design of small energy storage system using second life batteries. In: 12th UK Control Automatic Conference (UKACC), Sheffield, 5-7 Sep 2018. Published in: Proceedings of the 12th UK Control Automatic Conference pp. 163-168. ISBN 9781538628652. (In Press)

Working or Discussion Paper

Ng, Irene C. L. (2018) Can you own your personal data? The HAT (Hub-Of-All-Things) data ownership model. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (02/18). (Unpublished)

Ng, Irene C. L. (2018) The market for person-controlled personal data with the Hub-of-all-Things (HAT). Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (01/18). (Unpublished)

Book

Denholm, John and Lee-Davies, Linda (2018) Enhancing education and training initiatives through serious games. Advances in educational technologies and instructional design . Hershey, PA: IGI Global. ISBN 9781522536895

Journal Item

Laleci Erturkmen, Gokce Banu, Yuksel, Mustafa, Sarigul, Bunyamin, Lindman, Pontus, Chen, Rong, Zhao, Lei, Bouaud, Jacques, Lilja, Mikael, de Manuel, Esteban, de Blas, Antonio, Marguerie, Christopher, Klein, Gunnar, Lim Choi Keung, Sarah Niukyun and Arvanitis, Theodoros N. (2018) Management of personalised guideline-driven care plans addressing the needs of multi-morbidity via clinical decision support services. International Journal of Integrated Care, 18 (S2). 132. doi:10.5334/ijic.s2132

Newall, Philip (2018) Dark nudges in gambling. Addiction Research & Theory . doi:10.1080/16066359.2018.1474206 (In Press)

Seers, Tim, Derry, Sheena, Seers, Kate and Moore, R. Andrew (2018) Professionals underestimate patientsʼ pain : a comprehensive review. Pain, 159 (5). pp. 811-818. doi:10.1097/j.pain.0000000000001165

Report

Newton, Claudia (2018) Towards sustainable luxury materials selection : measuring the perceived quality of automotive interior materials. University of Warwick, WMG. (Unpublished)

Ng, Irene C. L., Wakenshaw, Susan Y. L., Dhamotharan, Lalitha, Ma, Xiao, Tasker, Paul, Maull, Roger, Crowcroft, Jon and Parry, Glenn (2018) Response to centre for data ethics and innovation consultation. HAT Community Foundation.

Dataset

Kampert, Erik (2018) Data for Investigating the V2V millimeter-wave channel near a vehicular headlight in an engine bay. [Dataset]

Kay, Christopher, Goring, Paul D., Burnett, Connah A., Hornby, Ben, Lewtas, Kenneth, Morris, Shaun N., Morton, Colin, McNally, Tony, Theaker, Giles W., Waterson, Carl, Wright, Peter M. and Scott, Peter (2018) Data for Polyolefin–polar block copolymers from versatile new macromonomers. [Dataset]

Worwood, Daniel, Algoo, R., McGlen, Ryan, Marco, James and Greenwood, David G. (2018) Data for A study into different cell-level cooling strategies for cylindrical lithium-ion cells in automotive applications. [Dataset] (Unpublished)