The Library
Browse by Funded research at the University of Warwick
Up a level |
Jump to: Journal Article | Conference Item
Number of items: 10.
Journal Article
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. doi:10.1007/s00170-016-8691-4 ISSN 0268-3768.
Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Kiraci, Ercihan, Gupta, Aniruddha, Barnes, Stuart and Williams, M. A. (Mark A.) (2015) Metrological study of CFRP drilled holes with x-ray computed tomography. The International Journal of Advanced Manufacturing Technology, 78 (9-12). pp. 2025-2035. doi:10.1007/s00170-014-6734-2 ISSN 0268-3768.
Hutton, Laura A., Vidotti, Marcio, Iacobini, James G., Kelly, C. (Chris), Newton, Mark E., Unwin, Patrick R. and Macpherson, Julie V. (2011) Fabrication and characterization of an all-diamond tubular flow microelectrode for electroanalysis. Analytical Chemistry, Vol.83 (No.14). pp. 5804-5808. doi:10.1021/ac2010247 ISSN 0003-2700.
Hutton, Laura A., Vidotti, Marcio, Patel, Anisha N., Newton, Mark E., Unwin, Patrick R. and Macpherson, Julie V. (2011) Electrodeposition of nickel hydroxide nanoparticles on boron-doped diamond electrodes for oxidative electrocatalysis. The Journal of Physical Chemistry Part C: Nanomaterials, Interfaces and Hard Matter, Vol.115 (No.5). pp. 1649-1658. doi:10.1021/jp109526b ISSN 1932-7447.
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. doi:10.1243/09544100JAERO583 ISSN 0954-4100.
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. doi:10.1243/09544100JAERO582 ISSN 0954-4100.
Ng, Irene C. L., Maull, Roger and Yip, Nick K. T. (2009) Outcome-based contracts as a driver for systems thinking and service-dominant logic in service science: Evidence from the defence industry. European Management Journal, Vol.27 (No.6). pp. 377-387. doi:10.1016/j.emj.2009.05.002 ISSN 0263-2373.
Hutton, Laura A., Newton, Mark E., Unwin, Patrick R. and Macpherson, Julie V. (2009) Amperometric oxygen sensor based on a platinum nanoparticle-modified polycrystalline boron doped diamond disk electrode. Analytical Chemistry, Vol.81 (No.3). pp. 1023-1032. doi:10.1021/ac8020906 ISSN 0003-2700.
Bates, D., Smith, G. F., Lu, Dawei and Hewit, J. (2000) Rapid thermal non-destructive testing of aircraft components. Composites Part B: Engineering, Vol.31 (No.3). pp. 175-185. doi:10.1016/S1359-8368(00)00005-6 ISSN 1359-8368.
Conference Item
Butterfield, Joe, Ng, Irene C. L., Roy, Rajkumar and McEwan, William (2009) Enabling value co-production in the provision of support service engineering solutions using digital manufacturing methods. In: Winter Simulation Conference 2009, Austin, TX, U.S.A., 13-16 Dec 2009 . Published in: Proceedings of the Winter Simulation Conference 2009 pp. 3009-3022. doi:10.1109/WSC.2009.5429222 ISSN ISBN: 978-1-4244-5770-0.