Browse by Subject
|Up a level|
Number of items at this level: 184.
Angarita-Jaimes, N. C., Parker, J. E. A., Abe, M., Mashauri, F., Martine, J., Towers, Catherine E., McCall, P. J. and Towers, David A.. (2016) A novel video-tracking system to quantify the behaviour of nocturnal mosquitoes attacking human hosts in the field. Journal Royal Society Interface, 13 (117). pp. 1-14. ISSN 1742-5689
Aydin, Nursen, Birbil, S. Ilker and Topaloglu, Huseyin. (2016) Delayed purchase options in single-leg revenue management. Transportation science . ISSN 0041-1655 (In Press)
Besco, Stefano, Modesti, Michele, Lorenzetti, Alessandra, Donadio, Stefano and McNally, Tony. (2012) Effect of modified clay on the morphology and electrical properties of PC/ABS-MWCNT composites. Journal of Applied Polymer Science, Volume 124 (Number 5). pp. 3617-3625. ISSN 0021-8995
Birrell, Stewart A. and Fowkes, Mark. (2014) Glance behaviours when using an in-vehicle smart driving aid : a real-world, on-road driving study. Transportation Research Part F: Traffic Psychology and Behaviour, Volume 22 . pp. 113-125. ISSN 1369-8478
Birrell, Stewart A. and Haslam, Roger. (2010) The effect of load distribution within military load carriage systems on the kinetics of human gait. Applied Ergonomics, Volume 41 (Number 4). pp. 585-590. ISSN 0003-6870
Birrell, Stewart A., Hooper, Robin H. and Haslam, Roger. (2007) The effect of military load carriage on ground reaction forces. Gait & Posture, Volume 26 (Number 4). pp. 611-614. ISSN 0966-6362
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano. (2015) A new rock slicing method based on linear programming. Computers and geotechnics, 65 . pp. 12-29. ISSN 0266-352X
Broadberry, Stephen and Jong, Herman de. (2000) Technology and productivity in historical perspective : introduction. European Review of Economic History, Vol.4 (No.2). pp. 115-119. ISSN 1361-4916
Cagno, Enrico, Masi, Donato and Leão, Celina Pinto. (2015) Drivers for OSH interventions in small and medium-sized enterprises. International Journal of Occupational Safety and Ergonomics . p. 19. ISSN 1080-3548 (In Press)
Chan, Ivan W. M., Pinfold, Martyn, Kwong, C. K. and Szeto, W. H.. (2011) A review of research, commercial software packages and patents on family mould layout design automation and optimisation. International Journal of Advanced Manufacturing Technology, Vol.57 (No.1-4). pp. 23-47. ISSN 0268-3768
Chetwynd, D. G., Liu, Xianping and Smith, S. T.. (1996) A controlled-force stylus displacement probe. Precision Engineering, 19 (2-3). pp. 105-111. ISSN 0141-6359
Cinelli, Marco, Coles, Stuart R. and Kirwan, Kerry. (2014) Analysis of the potentials of multi criteria decision analysis methods to conduct sustainability assessment. Ecological Indicators, Volume 46 . pp. 138-148. ISSN 1470-160X
Clark, Leon, Shirinzadeh, Bijan, Tian, Yanling and Zhong, Yongmin. (2014) The bounds on tracking performance utilising a laser-based linear and angular sensing and measurement methodology for micro/nano manipulation. Measurement Science and Technology, 25 (12). 125005. ISSN 0957-0233
Coles, Stuart R., Jacobs, Daniel K., Meredith, James O., Barker, Guy C., Clark, A. J. (Andrew J.), Kirwan, Kerry, Stanger, Jonathan and Tucker, Nick. (2010) A design of experiments (DoE) approach to material properties optimization of electrospun nanofibers. Journal of Applied Polymer Science, Vol.117 (No.4). pp. 2251-2257. ISSN 0021-8995
Collingwood, Joanna F., Chong, R. K. K., Kasama, Takeshi, Cervera-Gontard, Lionel, Dunin-Borkowski, R. E., Perry, George, Pósfai, M., Siedlak, Sandra L., Simpson, E. T., Smith, Mark A. and Dobson, Jon. (2008) Three-dimensional tomographic imaging and characterization of iron compounds within Alzheimer's plaque core material. Journal of Alzheimer's disease : JAD, Vol.14 (No.2). pp. 235-245. ISSN 1387-2877
David, Gary C, Chand, Donald, Newell, Susan and Resende-Santos, João. (2008) Integrated collaboration across distributed sites: the perils of process and the promise of practice. Journal of Information Technology, Vol.23 (No.1). pp. 44-54. ISSN 0268-3962
Demirbag, Mehmet and Glaister, Keith W.. (2010) Factors determining offshore location choice for R&D projects : a comparative study of developed and emerging regions. Journal of Management Studies, Volume 47 (Number 8). pp. 1534-1560. ISSN 0022-2380
Dixon, S., Cann, B., Carroll, Donna L., Fan, Y. and Edwards, R. S. (Rachel S.). (2008) Non-linear enhancement of laser generated ultrasonic Rayleigh waves by cracks. Nondestructive Testing and Evaluation, Vol.23 (No.1). pp. 25-34. ISSN 1058-9759
Duque-Daza, Carlos, Lockerby, Duncan A. and Galeano, Carlos. (2011) Numerical solution of the Falkner-Skan equation using third-order and high-order-compact finite difference schemes. Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.33 (No.4). pp. 381-392. ISSN 1678-5878
Englert, Matthias, Röglin, Heiko and Vöcking, Berthold. (2014) Worst case and probabilistic analysis of the 2-Opt algorithm for the TSP. Algorithmica, Volume 68 (Number 1). pp. 190-264. ISSN 0178-4617
French, Simon, Bayley, Clare and Zhang, Nan. (2011) Web-based group decision support for crisis management. International Journal of Information Systems for Crisis Response and Management, Vol.1 (No.1). pp. 41-54. ISSN 1937-9390
Giovanni, Bruno, Efremov, Alexander M., An, Chong P., Wheaton, Bryan R. and Hughes, Darren J.. (2012) Connecting the macro and microstrain responses in technical porous ceramics. Part II : microcracking. Journal of Materials Science, Vol.47 (No.8). pp. 3674-3689. ISSN 0022-2461
Greenhalgh, Trisha, Procter, Rob, Wherton, Joe, Sugarhood, Paul, Hinder, Sue and Rouncefield, Mark. (2015) What is quality in assisted living technology? : the ARCHIE framework for effective telehealth and telecare services. BMC Medicine, Volume 13 (Number 1). pp. 1-15. Article number 91. ISSN 1741-7015
Griffin, Jim E. and Steel, Mark F. J.. (2008) Flexible mixture modelling of stochastic frontiers. Journal of Productivity Analysis, Vol.29 (No.1). pp. 33-50. ISSN 0895-562X
Hammond, Michael, Crosson, Sue, Fragkouli, Elpiniki, Ingram, Jennifer, Johnston‐Wilder, Peter, Johnston‐Wilder, Sue, Kingston, Yvette, Pope, Melanie and Wray, David. (2009) Why do some student teachers make very good use of ICT? An exploratory case study. Technology, Pedagogy and Education, Vol.18 (No.1). pp. 59-73. ISSN 1475-939X
Hammond, Michael, Reynolds, Lawrence J. and Ingram, Jennifer. (2011) How and why do student teachers use ICT? Journal of Computer Assisted Learning, 27 (3). pp. 191-203. ISSN 02664909
Han, Ungkyu, Asmild, Mette and Kunc, Martin. (2014) Regional R&D efficiency in Korea from static and dynamic perspectives. Regional Studies . pp. 1-15. ISSN 0034-3404
Hindle, Giles A. and Hindle, T.. (2011) Safety cameras and road accidents : effectiveness in local authority areas in England. Journal of the Operational Research Society, Volume 62 (Number 7). pp. 1181-1188. ISSN 0160-5682
Jarvis, Stephen A., He, Ligang, Spooner, Daniel P. and Nudd, G. R.. (2005) The impact of predictive inaccuracies on execution scheduling. Performance Evaluation, Volume 60 (Number 1-4). pp. 127-139. ISSN 0166-5316
Jennings, P. A. (Paul A.) and Cain, Rebecca. (2013) A framework for improving urban soundscapes. Applied Acoustics, Volume 74 (Number 2). pp. 293-299. ISSN 0003-682X
Kumar, Jagadeesha, Attridge, Alex, Wood, P. K. C. and Williams, M. A. (Mark A.). (2011) Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement. Measurement Science and Technology, Volume 22 (Number 3). Article: 035105. ISSN 0957-0233
Letchford, Adrian, Preis, Tobias and Moat, Helen Susannah. (2015) The advantage of simple paper abstracts. Journal of Informetrics, 10 (1). pp. 1-8. ISSN 1751-1577
Li, Y. H., Ma, Y., Liu, S. T., Luo, Z. J., Mei, J. P., Huang, Tian and Chetwynd, D. G.. (2014) Integrated design of a 4-DOF high-speed pick-and-place parallel robot. CIRP Annals - Manufacturing Technology, Volume 63 (Number 1). pp. 185-188. ISSN 0007-8506
Liao, Jian-Qin, Hu, Xiao-Bing, Wang, Ming and Leeson, Mark S.. (2013) Epidemic modelling by ripple-spreading network and genetic algorithm. Mathematical Problems in Engineering, Volume 2013 . Article number 506240. ISSN 1024-123X
Lindgren, Rikard, Andersson, Magnus and Henfridsson, Ola. (2008) Multi-contextuality in boundary-spanning practices. Information Systems Journal, Volume 18 (Number 6). pp. 641-661. ISSN 1350-1917
Liu, Xianping, Chetwynd, D. G., Gardner, J. W., Bartlett, P. N. and Beriet, C.. (1998) Measurements of tribological properties of poly(pyrrole) thin film bearings. Tribology International, 31 (6). pp. 313-323. ISSN 0301-679X
Liu, Xianping, Smith, S. T. and Chetwynd, D. G.. (1992) Frictional forces between a diamond stylus and specimens at low load. Wear, 157 (2). pp. 279-294. ISSN 0043-1648
Llewellyn, Sue, Procter, Rob, Harvey, Gill, Maniatopoulos, Gregory and Boyd, Alan. (2014) Facilitating technology adoption in the NHS : negotiating the organisational and policy context : a qualitative study. Health Services and Delivery Research, Volume 2 (Number 23). ISSN 2050-4349
Lockerby, Duncan A. and Reese, Jason M.. (2008) On the modelling of isothermal gas flows at the microscale. Journal of Fluid Mechanics, Vol.604 . pp. 235-261. ISSN 0022-1120
Lockton, Dan, Harrison, David and Stanton, Neville A.. (2008) Making the user more efficient : design for sustainable behaviour. International Journal of Sustainable Engineering, Vol.1 (No.1). pp. 3-8. ISSN 1939-7038
Lockton, Dan, Harrison, David and Stanton, Neville A.. (2012) Models of the user : designers' perspectives on influencing sustainable behaviour. Journal of Design Research, Vol.10 (No.1-2). pp. 7-27. ISSN 1748-3050
Lockton, Dan, Harrison, David and Stanton, Neville A.. (2010) The design with intent method : a design tool for influencing user behaviour. Applied Ergonomics, Vol.41 (No.3). pp. 382-392. ISSN 0003-6870
Loddington, Steve, Pond, Keith, Wilkinson, Nicola and Willmot, Peter. (2009) A case study of the development of WebPA : an online peer-moderated marking tool. British Journal of Educational Technology, Vol.40 (No.2). pp. 329-341. ISSN 0007-1013
Ma, Xiao, Bal, Jay and Issa, Ahmad. (2014) A fast and economic ontology engineering approach towards improving capability matching : application to an online engineering collaborative platform. Computers in Industry . ISSN 2049-4297 (In Press)
Maniatopoulos, Greg, Procter, Rob, Llewellyn, Sue, Harvey, Gill and Boyd, Alan. (2015) Moving beyond local practice : reconfiguring the adoption of a breast cancer diagnostic technology. Social Science & Medicine, Volume 131 . pp. 98-106. ISSN 0277-9536
Manning, A. S. and Liu, Xianping. (1999) Measurements of thermal expansion coefficients of anodized aluminium substrates for hybrid circuits. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 213 (2). pp. 121-127. ISSN 1464-4207
Melo, Miguel, Bessa, Maximinho, Debattista, Kurt and Chalmers, Alan. (2015) Evaluation of tone-mapping operators for HDR video under different ambient luminance levels. Computer Graphics Forum, 34 (8). pp. 38-49. ISSN 0167-7055
Mikkelsen, Miguel Romero and Christensen, Pia H.. (2009) Is children's independent mobility really independent? A study of children's mobility combining ethnography and GPS/mobile phone technologies. Mobilities, Vol.4 (No.1). pp. 37-58. ISSN 1745-0101
Mu, Y. L., Wang, Q. D., Hu, M. L., Janik, Vit and Yin, D. D.. (2013) Elevated-temperature impact toughness of Mg–(Gd, Y)–Zr alloy. Scripta Materialia, Volume 68 (Number 11). pp. 885-888. ISSN 1359-6462
Newell, Sue, Huang, Jimmy, C. and Tansley, Carole. (2006) ERP implementation : a knowledge integration challenge for the project team. Knowledge and Process Management, Volume 13 (Number 4). pp. 227-238. ISSN 1092-4604
Ng, Irene C. L., Badinelli, Ralph D., Polese, Francesco, Di Nauta, Primiano, Löbler, Helge and Halliday, Sue, Professor. (2012) S-D logic research directions and opportunities : the perspective of systems, complexity and engineering. Marketing Theory, Vol.12 (No.2). pp. 213-217. ISSN 1470-5931
Nisticò, Giuseppe, Pascoe, D. J. (David J.) and Nakariakov, V. M. (Valery M.). (2014) Observation of a high-quality quasi-periodic rapidly propagating wave train using SDO/AIA. Astronomy & Astrophysics, 569 . A12. ISSN 0004-6361
O'Brien, Frances A.. (2011) Supporting strategy : a survey of UK OR/MS practitioners. Journal of the Operational Research Society, Vol.62 (No.5). pp. 900-920. ISSN 0160-5682
Olivers, Christian N. L. and Watson, Derrick G. . (1999) On the efficiency of drawing computer-generated line stimuli : rectangles can be faster than lines. Behavior Research Methods: Instruments and Computers, Vol.31 (No.3). pp. 416-422. ISSN 0743-3808
Parker, Josephine E. A., Angarita-Jaimes, Natalia, Abe, Mayumi, Towers, Catherine E., Towers, David A. and McCall, Philip J.. (2015) Infrared video tracking of Anopheles gambiae at insecticide-treated bed nets reveals rapid decisive impact after brief localised net contact. Scientific Reports, 5 . 13392. ISSN 2045-2322
Pecchia, Leandro, Martin, Jennifer L., Ragozzino, Angela, Vanzanella, Carmela, Scognamiglio, Arturo, Mirarchi, Luciano and Morgan, Stephen P.. (2013) User needs elicitation via analytic hierarchy process (AHP). A case study on a Computed Tomography (CT) scanner. BMC Medical Informatics and Decision Making, Volume 13 (Number 1). Article number 2. ISSN 1472-6947
Pritchard, Alan, Hunt, Marilyn J. and Barnes, Ann. (2010) Case study investigation of a videoconferencing experiment in primary schools, teaching modern foreign languages. Language Learning Journal, Vol.38 (No.2). pp. 209-220. ISSN 0957-1736
Procter, Rob, Wherton, Joe, Greenhalgh, Trish, Sugarhood, Paul, Rouncefield, Mark and Hinder, Sue. (2015) Telecare call centre work and ageing in place. Computer Supported Cooperative Work (CSCW) . pp. 1-27. ISSN 0925-9724 (In Press)
Procter, Rob, Wherton, Joe, Greenhalgh, Trisha, Sugarhood, Paul, Rouncefield, Mark and Hinder, Sue. (2016) Telecare call centre work and ageing in place. Computer Supported Cooperative Work (CSCW) . pp. 1-27. ISSN 0925-9724
Pérez-Tomás, Amador, Catalàn, G., Fontserè, A., Iglesias, V., Chen, Han, Gammon, P. M., Jennings, M. R., Thomas, M., Fisher, Craig A., Sharma, Yogesh K., Placidi, M., Chmielowska, M., Chenot, S., Porti, M., Nafría, M. and Cordier, Y.. (2015) Nanoscale conductive pattern of the homoepitaxial AlGaN/GaN transistor. Nanotechnology, 26 (11). pp. 1-10. 115203. ISSN 0957-4484
Rashvand, H. F., Zeng, Y., Green, Roger and Leeson, Mark S.. (2008) Look-up table error correcting multiple pulse PPM codes for wireless optical communication channels. IET Communications, Vol.2 (No.1). pp. 27-34. ISSN 1751-8628
Robinson, Stewart, Radnor, Z. J., Burgess, Nicola and Worthington, Claire. (2012) SimLean : utilising simulation in the implementation of lean in healthcare. European Journal of Operational Research, Vol.219 (No.1). pp. 188-197. ISSN 0377-2217
Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G. and Burrows, Clifford R.. (2011) An adaptive multi-objective controller for flexible rotor and magnetic bearing systems. Journal of Dynamic Systems, Measurement and Control, Vol.133 (No.3). 031003. ISSN 0022-0434
Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John. (2016) Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications. Journal of Applied Polymer Science, 133 (25). 43572. ISSN 0021-8995
Sannino , Giovanna, Melillo, Paolo, De Pietro, Giuseppe, Stranges, Saverio and Pecchia, Leandro. (2015) Blood pressure drop prediction by using HRV measurements in orthostatic hypotension. Journal of Medical Systems, 39 (11 ). ISSN 0148-5598 (In Press)
Santra, S., Hu, G., Howe, R. C. T., De Luca, A., Ali, S. Z., Udrea, F., Gardner, J. W., Ray, S. K., Guha, P. K. and Hasan, T.. (2015) CMOS integration of inkjet-printed graphene for humidity sensing. Scientific Reports, 5 . 17374. ISSN 2045-2322
Skelton, Adam A., Liang, Tainingt.lia and Walsh, Tiffany R.. (2009) Interplay of sequence, conformation, and binding at the peptide-titania interface as mediated by water. ACS Applied Materials and Interfaces, Vol.1 (No.7). pp. 1482-1491. ISSN 1944-8244
Song, John and Liu, Xianping. (2016) A review of NIST projects in surface and topography metrology for firearm evidence identification in forensic science. Journal of Scientific and Industrial Metrology, 1 (1). pp. 1-7.
Stewart, Theodor J., French, Simon and Rios, Jesus. (2013) Integrating multicriteria decision analysis and scenario planning : review and extension. Omega-International Journal of Management Science, Vol.41 (No.4). pp. 679-688. ISSN 0305-0483
Taylor-Phillips, Sian, Wallis, Matthew G. and Gale, Alastair G.. (2009) Should previous mammograms be digitised in the transition to digital mammography? European Radiology, Vol.19 (No.8). pp. 1890-1896. ISSN 0938-7994
Taylor-Phillips, Sian, Wallis, Matthew G., Jenkinson, David J., Adekanmbi, Victor, Parsons, Helen, Dunn, Janet A., Stallard, Nigel, Szczepura, Ala, Gates, Simon, Kearins, Olive, Duncan, Alison, Hudson, Sue and Clarke, Aileen. (2016) Effect of using the same vs different order for second readings of screening mammograms on rates of breast cancer detection : a randomized clinical trial. JAMA: The Journal of the American Medical Association, 315 (18). ISSN 0098-7484
Tian, Yanling, Liu, X., Chetwynd, D. G., Shirinzadeh, B. and Zhang, D.. (2010) Vibration analysis of stylus instrument for random surface measurement. Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Vol.34 (No.3). pp. 586-591. ISSN 0141-6359
Tian, Yanling, Liu, Zheng and Cai, Kunhai. (2015) Wrinkling behaviour of annular graphynes under circular shearing load using molecular dynamics simulations. Nanomaterials and Nanotechnology, 5 (9). ISSN 1847-9804
Todorova, Nevena, Makarucha, Adam J., Hine, Nicholas, Mostofi, Arash A. and Yarovsky, Irene. (2013) Dimensionality of carbon nanomaterials determines the binding and dynamics of amyloidogenic peptides : multiscale theoretical simulations. PLoS Computational Biology, 9 (12). e1003360. ISSN 1553-7358
Turner, Martin, Jones, Michael, Poschen, Meik, Procter, Rob, Rowley, Andrew and Schiebeck, Tobias. (2012) Secure data sharing across portals : experiences from OneVRE. Philosophical Transactions of the Royal Society A : Mathematical, Physical and Engineering Sciences, Volume 371 (Number 1983).
Ushioda, Ema. (2013) Motivation matters in mobile language learning : A brief commentary. Language Learning & Technology, Volume 17 (Number 3). pp. 1-5. ISSN ISSN 1094-3501
White, Leroy. (2015) Behavioural operational research : towards a framework for understanding behaviour in or interventions. European journal of operational research . ISSN 0377-2217 (In Press)
White, Leroy, Burger, Katharina and Yearworth, Mike. (2015) Understanding behaviour in problem structuring methods interventions with activity theory. European journal of operational research . ISSN 0377-2217 (In Press)
Whitley, J. D. and Wilson, Robert A.. (1982) Quantifying the employment effects of micro-electronics. Futures, Volume 14 (Number 6). pp. 486-495. ISSN 0016-3287
Wilson, Robert A.. (1980) The rate of return to becoming a qualified scientist or engineer in Great Britain, 1966-1976. Scottish Journal of Political Economy, Volume 27 (Number 1). pp. 41-61. ISSN 0036-9292
Wright, P. D., Kanumilli , S., Tickle, David, Cartland, J., Bouloc, N., Dale, T., Tresize, D. J., McCloskey, Conor, McCavera, Samantha, Blanks, Andrew M., Kettleborough, Catherine and Jerman, Jeff. (2015) A high-throughput electrophysiology assay identifies inhibitors of the inwardly rectifying potassium channel Kir7.1. Journal of Biomolecular Screening, Volume 20 (Number 6). pp. 739-747. ISSN 1087-0571
Connaughton, Colm, Rajesh, R. and Zaboronski, Oleg V. (2011) Kinetics of cluster-cluster aggregation. In: Sattler, Klaus D., (ed.) Handbook of nanophysics. Boca Raton, Fla.: CRC Press, pp. 1-40. ISBN 9781420075380
Edwards, R. S. (Rachel S.) (2010) Looking forward - new challenges, new directions. In: Richards, Keith, 1952-, (ed.) The new optimists : scientists view tomorrow's world & what it means to us. Birmingham: Linus. ISBN 9781907843006
French, Simon (2010) The internet and the web. In: Rios Insua, David, 1964- and French, Simon, 1950-, (eds.) E-democracy : a group decision and negotiation perspective. Advances in group decision and negotiation, Vol.5 . Dordrecht ; London: Springer, pp. 153-162. ISBN 9789048190447
French, Simon, Bayley, Clare and Zhang, Nan (2008) Web-based group decision support for crisis management. In: Kock, Ned F., 1964-, (ed.) E-collaboration in modern organizations : initiating and managing distributed projects. Advances in e-collaboration series . Hershey, Pa.: Information Science Reference, pp. 721-734. ISBN 9781599048253
Katzis, Konstantinos, Jones, Richard W. and Despotou, George (2016) The challenges of balancing safety and security in implantable medical devices. In: Unifying the Applications and Foundations of Biomedical and Health Informatics. Studies in Health Technology and Informatics, 226 . I O S Press, pp. 25-28.
Leadley, D. R. (David R.), Prest, M. J. (Martin J.), Ahopelto, Jouni, Brien, Tom, Gunnarsson, David, Mauskopf, Phil, Muhonen, Juha, Myronov, Maksym, Nguyen, Hung, Parker, Evan H. C., Prunnila, Mika, Richardson-Bullock, J. S., Shah, V. A., Whall, Terry E. and Zhao, Q. T. (2014) Silicon-based cooling elements. In: Balestra, Francis, (ed.) Beyond CMOS Nanodevices. Nanoscience and Nanotechnology Series, Volume 1 . Wiley-ISTE, pp. 303-330. ISBN 9781848216549
Marabelli, Marco and Newell, Susan (2010) The Post Implementation Phase of a Large-Scale Integrative IT Project. In: Enterprise Information Systems and Implementing IT Infrastructures. Hershey, PA: I G I Global, pp. 180-194. ISBN 978-1-6152-0625-4
Melillo, Paolo and Pecchia, Leandro (2014) A preliminary model to choose the most appropriate target population for home monitoring telemedicine interventions basing on the best available evidence. In: Pecchia, Leandro and Chen, Liming Luke and Nugent, Chris and Bravo, Jose, (eds.) Ambient Assisted Living and Daily Activities : 6th International Work-Conference, IWAAL 2014, Belfast, UK, December 2-5, 2014. Proceedings. Lecture Notes in Computer Science, Volume 8868 . Springer, pp. 406-408. ISBN 9783319131047
Melillo, Paolo, Scala, Paolo, Crispino, Filippo and Pecchia, Leandro (2014) Cloud-based Remote processing and data-mining platform for automatic risk assessment in hypertensive patients. In: Pecchia, Leandro and Chen, Liming Luke and Nugent, Chris and Bravo, Jose, (eds.) Ambient Assisted Living and Daily Activities : 6th International Work-Conference, IWAAL 2014, Belfast, UK, December 2-5, 2014. Proceedings. Lecture Notes in Computer Science, Volume 8868 . Springer, pp. 155-162. ISBN 9783319131047
Pecchia, Leandro and Craven, M. P. (2013) Early stage Health Technology Assessment (HTA) of biomedical devices : The MATCH experience. In: Long, Mian, (ed.) World Congress on Medical Physics and Biomedical Engineering May 26-31, 2012, Beijing, China. IFMBE Proceedings, Volume 39 . Springer, pp. 1525-1528. ISBN 9783642293047
Rios Insua, David and French, Simon (2010) E-democracy : the road ahead. In: Rios Insua, David, 1964- and French, Simon, 1950-, (eds.) E-democracy : a group decision and negotiation perspective. Advances in group decision and negotiation, Vol.5 . Dordrecht ; London: Springer, pp. 345-348. ISBN 9789048190447
Sannino, Giovanna, Melillo, Paolo, De Pietro, Giuseppe, Stranges, Saverio and Pecchia, Leandro (2014) To what extent it is possible to predict falls due to standing hypotension by using HRV and wearable devices? Study design and preliminary results from a proof-of-concept study. In: Pecchia, Leandro and Chen, Liming Luke and Nugent, Chris and Bravo, Jose, (eds.) Ambient Assisted Living and Daily Activities. Lecture Notes in Computer Science, Volume 8868 . Springer, pp. 167-170. ISBN 9783319131047
Wilson, Robert A. and Briscoe, G. (Geoffrey) (2005) The impact of human capital on economic growth : a review. In: Descy, P. and Tessaring, M., (eds.) Impact of education and training : third report on vocational training research in Europe : background report. Cedefop Reference series (Number 54). Luxembourg: Office for Official Publications of the European Communities, pp. 13-61.
Wright, Sally and Rafferty, Mike (2012) Global concept : work. In: The core body of knowledge for generalist OHS professionals. Tullamarine: Safety Institute of Australia. ISBN 9780980874310
Angelopoulos, Spyros, Kitsios, F., Kofakis, P. and Papadopoulos, Thanos (2010) Emerging barriers in E-government implementation. In: 9th IFIP WG 8 5 International Conference, EGOV 2010, University of Lausanne, Lausanne, Switzerland, 29 Aug-2 Sep 2010. Published in: Lecture Notes in Computer Science, Volume 6228 pp. 216-225.
Asadipour, Ali, Debattista, Kurt and Chalmers, Alan (2015) A game-based training approach to enhance human hand motor learning and control abilities. In: 7th International Conference on Games and Virtual Worlds for Serious Applications (VS-Games 2015), Skövde, Sweden, 16-18 Sep 2015. Published in: 2015 7th International Conference on Games and Virtual Worlds for Serious Applications (VS-Games) pp. 1-6.
Bhattacharya, R., Stanton, M., Dargue, I., Aylmore, R. and Williams, G. (2011) Experimental Evaluation of Springback in Aluminium Alloys Using Optical Measurement and Numerical Analysis. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 241-246.
Diamond, G. G., Hutchins, David A., Pallav, P. and Green, Roger (2008) A novel low cost alternative to THz for security and defence applications. In: 34th Conference on Infrared Technology and Applications, Orlando, FL, Mar 17-20, 2008. Published in: Proceedings of SPIE - International Society for Optical Engineering, Vol.6940 (Pt.1-2). S9401-S9401.
Greenhalgh, Trisha, Procter, Rob, Wherton, Joe, Rouncefield, Mark and Dewsbury, Guy (2011) ATHENE : Assistive technologies for healthy living in elders : needs assessment by ethnography. In: 2nd Digital Economy All Hands Meeting, Newcastle, UK, 15-17 Nov 2011. Published in: Proceedings of the 2nd Digital Economy All Hands Meeting
Higgins, A. and Nandhakumar, Joe (2010) Conceptualizing collaborative design in teams. In: 26th EGOS Colloquium 2010, Lisbon, Portugal, 1-3rd July 2010. Published in: Proceedings of the 26th EGOS Colloquium 2010 (Sub-Theme 47).
Hoad, Kathryn, Robinson, Stewart and Davies, Ruth (2008) Automating warm-up length estimation. In: 2008 Winter Simulation Conference, Miami, FL, Dec 07-10, 2008. Published in: Proceedings of the Winter Simulation Conference 2008, Volumes 1-5 pp. 532-540.
Hodges, Sarah (2008) Of biotrash and techno-bling : umbilical cord blood banking in Chennai. In: Bodily States in South Asia: Contemporary Histories, University of Warwick, Coventry, UK, Sep 2008 (Unpublished)
Hodges, Sarah (2010) Of biotrash and techno-bling in New Chennai. In: Of biotrash and techno-bling in New Chennai, National Institute of Science, Technology and Development (NISTADS), Jan 2010 (Unpublished)
Hulusić, Vedad, Aranha, Matt and Chalmers, Alan (2008) The influence of cross-modal interaction on perceived rendering quality thresholds. In: 16th International Conference in Central Europe on Computer Graphics, Visualization and Computer Vision, Univ W Bohemia, Plzen, Czech Republic, Feb 04-07, 2008. Published in: Journal of WSCG, Volume 16 pp. 41-48.
Lindley, Robert M. (2002) Skills, mobility and policy moods in knowledge-based economies. In: Labor market’s in the 21st century : skills and mobility , 21-22 Feb 2002 . Published in: Labor market’s in the 21st century : skills and mobility proceedings of a joint United States and European Union conference pp. 1-69.
Lu, Dawei (1994) Fuzzy multiple-criteria analysis for selective bearing shell assembly design. In: Japan-U.S.A. Symposium on Flexible Automation, Kobe, Japan, 11th-18th July 1994. Published in: Proceedings of Japan-U.S.A. Symposium on Flexible Automation pp. 917-920. (Unpublished)
Maniatopoulos, Gregory, Llewellyn, Sue, Procter, Rob and Harvey, Gill (2011) Lost in translation? : negotiating technological innovation in healthcare. In: 27th EGOS Colloquium: Reassembling Organizations, Gothenburg, Sweden, July 6–9, 2011. Published in: Proceedings of the European Group for Organisational Studies Colloquium pp. 1-20.
Marchetti, E. and Nandhakumar, Joe (2011) On the edge between tradition and innovation: Reassembling museums as emerging creative organizations. In: 27th EGOS Colloquium: Reassembling Organizations, Gothenburg, Sweden, July 6–9, 2011. Published in: 27th EGOS Colloquium Program
Melillo, Paolo, Jovic, A., De Luca, Nicola, Morgan, S. and Pecchia, Leandro (2014) Automatic prediction of falls via heart rate variability and data mining in hypertensive patients : the SHARE project experience. In: 6th European Conference of the International Federation for Medical and Biological Engineering (MBEC2014), Dubrovnik, Croatia, 7-11 Sep 2014 (Unpublished)
Melillo, Paolo, Scala, Paolo, De Luca, Nicola and Pecchia, Leandro (2014) Automatic prediction of vascular events by heart rate variability analysis in hypertensive patients. In: 6th European Conference of the International Federation for Medical and Biological Engineering (MBEC2014), Dubrovnik, Croatia, 7-11 Sep 2014 (Unpublished)
Molnar, W. and Nandhakumar, Joe (2009) Managing projects in an embedded systems development context: an in-depth case study from an improvisational perspective. In: 42nd Hawaii International Conference on System Sciences, Waikoloa, Hawaii, 5-8 Jan, 2009. Published in: Proceedings of the 42nd Hawaii International Conference on System Sciences
Morris, Andrew , Welsh, Ruth , Brown, Laurie, Birrell, Stewart A. and Reed , Steven (2013) Studying the effects of in-vehicle information systems on driver visual behaviour – implications for design. In: International Research Council on Biomechanics of Injury (IRCOBI 2013) , Gothenburg, Sweden, 11-13 Sept 2013. Published in: 2013 IRCOBI Conference Proceedings
Mouhtaropoulos, Antonis, Grobler, Marthie and Li, Chang-Tsun (2011) Digital forensic readiness : an insight into governmental and academic initiatives. In: 2011 European Intelligence and Security Informatics Conference, Athens, Greece, 12th-14th September 2011 pp. 191-196.
Moztarzadeh, Hadi, Hughes, Darren J., Seth, Sampan, Keating, Elspeth, Kirachi, Ercihan , Gibbons, Gregory John and Dashwood, R. J. (2015) Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V. In: 8th International Conference on Mechanical Stress Evaluation by Neutron & Synchrotron Radiation MACASENS 2015, Grenoble, France, 30 Sep -2 Oct 2015. Published in: Materials Science Forum (In Press)
Mullins, David R. (2015) Collaborative models for healthcare innovation. In: Malaysian International Healthcare Innovation Conference, Limkokwing University, Malaysia, 30 Nov 2015
Mullins, David R. (2015) Enabling university-industry collaboration to deliver high quality and high impact. In: 20th AGM and Knowledge Transfer Forum, International Strategic Technology Alliance, Nanjing, China, 6 Nov 2015
Panourgias, Nikiforos, Nandhakumar, Joe and Scarbrough, Harry (2011) Game engines and the relationship between digital creativity and technological innovation in computer games development. In: 27th EGOS Colloquium: Reassembling Organizations, Gothenburg, Sweden, July 6–9, 2011. Published in: 27th EGOS Colloquium Program
Panourgias, Nikiforos, Nandhakumar, Joe and Scarbrough, Harry (2009) Knowledge integration and innovation in a computer games design and development studio. In: 25th EGOS Colloquium, Barcelona, Spain, 2–4 Jul, 2009. Published in: Proceedings of the 25th EGOS Colloquium (Sub-Theme 23).
Panourgias, Nikiforos, Nandhakumar, Joe and Scarbrough, Harry (2010) Material practices of coordination and innovation in the design and development of computer games. In: 26th EGOS Colloquium 2010, Lisbon, Portugal, 1-3rd July 2010. Published in: Proceedings of the 26th EGOS Colloquium 2010 (Sub-Theme 18).
Panourgias, Nikiforos, Nandhakumar, Joe and Scarbrough, Harry (2009) Objects and their participation in the interdisciplinary design and development of computer games. In: 17th European Conference on Information Systems, Verona, Italy, 8-10 June, 2009. Published in: Proceedings of the 17th European Conference on Information Systems
Pecchia, Leandro (2015) AHP for user need elicitation : method and available tools. In: World Congress on Medical Physics and Biomedical Engineering, Toronto, Canada, 7-12 June 2015 (Unpublished)
Pecchia, Leandro and Craven, M. P. (2012) Early stage Health Technology Assessment. In: GNB2012 : Third Conference of the Italian National Group of Bioengineering , Rome, Italy, 26-29 Jun 2012 (Unpublished)
Pecchia, Leandro, Merola, Giovanni, Sodo, M. and Bracale, Umberto (2014) Analytic hierarchy process (AHP) to select the surgical approach in hernia repair : laparoscopic (TAPP) versus open surgery. In: 6th European Conference of the International Federation for Medical and Biological Engineering (MBEC2014), Dubrovnik, Croatia, 7-11 Sep 2014 (Unpublished)
Roberts, Stephen I., Wright, Steven A., Lecomber, David, January, Christopher, Byrd, Jonathan, Oro, Xavier and Jarvis, Stephen A. (2015) POSE : A mathematical and visual modelling tool to guide energy aware code optimisation. In: The 6th International Green and Sustainable Computing Conference (IGSC' 15), Las Vegas, USA, 14-16 Dec 2015 (In Press)
Stacey, Patrick, Nandhakumar, Joe and Brown, A. D. (Andrew D.) (2009) The consequences of distributed 'green' game design : a sensemaking perspective. In: 2009 Academy of Management: Green Management Matters, Chicago, Illinois, August 7-11, 2009. Published in: Proceedings of the 2009 Academy of Management: Green Management Matters
Taylor-Phillips, Sian, Wallis, Matthew and Gale, Alastair G. (2010) Radiologist performance in the 21st century : the impact of workstation type and MSD's. In: International Conference on Contemporary Ergonomics (CE2008), Nottingham, UK, 1-3 Apr 2008. Published in: Proceedings of the International Conference on Contemporary Ergonomics (CE2008), 1-3 April 2008, Nottingham, UK pp. 363-368.
Taylor-Phillips, Sian, Wallis, Matthew G., Duncan, Alison and Gale, Alastair G. (2009) The effect of digitising film prior mammograms on radiologists' performance in breast screening : a JAFROC study. In: Medical Imaging 2009: Image Perception, Observer Performance, and Technology Assessment, Lake Buena Vista, FL, USA, 11 Feb 2009. Published in: Proceedings Of The Society Of Photo-Optical Instrumentation Engineers, Vol.7263 p. 726311.
Xue, James W. J., Chester, Adam P., He, Ligang and Jarvis, Stephen A. (2008) Dynamic resource allocation in enterprise systems. In: 14th International Conference on Parallel and Distributed Systems, Melbourne, Australia , Dec 08-10, 2008. Published in: 14th International Conference on Parallel and Distributed Systems (ICPADS 2008) pp. 203-212.
Zhang, Nan, Bayley, Clare and French, Simon (2008) Use of web-based group decision support for crisis management. In: ISCRAM2008 Conference, Washington DC, 4-7 May 2008. Published in: ISCRAM2008 Proceedings pp. 55-58.
Working or Discussion Paper
HAT Project Research Team. (2016) HAT Briefing Paper 4 : HAT personal data exchange ecosystem - technology architecture briefing. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (01/16). (Unpublished)
HAT Project Research Team. (2016) HAT Briefing Paper 5 : Rolling out HATs and creating the market for personal data - the HAT foundation. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (02/16). (Unpublished)
HAT Project Research Team. (2016) HAT Briefing Paper 6 : Personal data exchange ecosystem : code of practice release 1. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (03/16). (Unpublished)
Draca, Mirko (2013) Reagan’s innovation dividend? Technological impacts of the 1980s US defense build-up. Working Paper. Coventry, UK: Department of Economics, University of Warwick. CAGE Online Working Paper Series, Volume 2013 (Number 168).
Ma, Xiao, Bal, Jay and Issa, Ahmad (2014) A fast and economic ontology engineering approach towards improving capability matching : application to an online engineering collaborative platform. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 04/14).
Ng, Irene C. L., Guo, Lei and Ding, Yi (2012) Continuing use of information technology as value co-creation : the role of contextual variety and means drivenness. Working Paper. Coventry: Warwick Manufacturing Group. Service Systems Research Group Working Paper Series (Number 07/12).
Pancrazi, Roberto and Vukotić, Marija (2013) Technology persistence and monetary policy. Working Paper. Coventry, UK: University of Warwick, Department of Economics. Warwick economics research papers series (TWERPS), Volume 2013 (Number 1013).
Pogrebna, Ganna (2015) Big data, brand loyalty, and business models : accounting for imprecision and noise in consumer preferences. Working Paper. Coventry: WMG, University of Warwick. WMG Service Systems Research Group Working Paper Series (Number 06/15).
Pogrebna, Ganna (2015) Servitization through human-data interaction : a behavioural approach. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 05/15).
Spolaore, Enrico and Wacziarg, Romain (2013) Long-term barriers to economic development. Working Paper. Coventry, UK: Department of Economics, University of Warwick. CAGE Online Working Paper Series, Volume 2013 (Number 149).
Wakenshaw, Susan Y. L., Phillips, Laura and Ng, Irene C. L. (2014) Value definitions and consumer consciousness. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 06/14).
Wakenshaw, Susan Y. L., Venters, Will, Ng, Irene C. L. and Lloyd, Ashley D. (2013) Sense-making of consumer wellbeing in information technology-enabled services from a relational ontology position. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 02/13).
Ward, Peter and Kynvin, Kate (2015) Consumer-focused supply chains : a cross-case comparison of medicine appeal and acceptance in India, Uganda and Nigeria. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 07/15).
Throsby, Karen, 1968- and Hodges, Sarah, eds. (2009) Technologies. Women's Studies Quarterly, Vol.37 (No.1-2). New York: Feminist Press. ISBN 9781558616004
Bosworth, Derek L., Wilson, Robert A. and Taylor, Paul C. (1992) Technological change : the role of scientists and engineers. Aldershot: Avebury. ISBN 1856283224
Lockton, Dan, Harrison, David and Stanton, Neville A. (2010) Design with intent : 101 patterns for influencing behaviour through design. Windsor: Equifine. ISBN 9780956542113
Christensen, Pia H., Mikkelsen, Miguel Romero, Nielsen, T. A. S. and Harder, H. (2011) Children, mobility, and space : using GPS and mobile phone technologies in ethnographic research. Journal of Mixed Methods Research, Vol.5 (No.3). pp. 227-246. ISSN 1558-6898
Martin, S., Sutcliffe, P., Griffiths, Frances, Sturt, Jackie, Powell, J., Adams, Ann and Dale, Jeremy (2011) Mental health and wellbeing : the use of communication technologies for the engagement of young adults and adolescents in mental healthcare. Journal of Epidemiology & Community Health, Vol.65 (Suppl.2). A15. ISSN 0143-005X
Throsby, Karen and Hodges, Sarah (2009) Introduction : situating technology. Women's Studies Quarterly , Vol.37 (No.1-2). ISSN 0732-1562
Whitehouse, D. J. (David J.) (2008) Nanometrology. Contemporary Physics, Vol.49 (No.5). pp. 351-374. ISSN 0010-7514
Submitted Journal Article
Stadler, Christian (2015) Capturing relatedness : comprehensive measures based on secondary data. British Journal of Management . ISSN 1045-3172 (In Press)
Widdows, Katharine (2011) Mobile technology for mobile staff : roving enquiry support. Multimedia and Information Technology, Vol.37 (No.2). pp. 12-15. ISSN 1466-190X
Bimrose, Jenny, Sofroniou, Nicholas, Barnes, Sally-Anne, Attwell, Graham, Rustemeier, Philipp, Stieglitz, Dirk, Elferink, Raymond, Hughes, Deirdre, Li, Yuxin, Owen, David, Wilson, Robert A., Bosworth, Luke and Millar, Peter (2016) LMI for all : technical, stakeholder engagement and data development services. Wath-upon-Dearne: UK Commission for Employment and Skills..
Green, Anne E., De Hoyos, Maria, Barnes, Sally-Anne, Baldauf, Beate and Behle, Heike (2014) Exploratory research on internet-enabled work exchanges and employability. Analysis and synthesis of qualitative evidence on crowdsourcing for work, funding and volunteers. Spain: European Commission Joint Research Centre..
Poschen, Meik, Procter, Rob, Voss, Alex, Birkin, Mark and Malleson, Nicolas (2012) Scoping and business models report. Coventry: University of Warwick.. (Unpublished)
Voss, Alex, Ings-Lamb, Alex and Procter, Rob (2012) Developing sustainability pathways for social simulation tools and services. University of Warwick.. (Unpublished)
Thesis or Dissertation
Agrafiotis, Ioannis (2012) Enhancing user's privacy : developing a model for managing and testing the lifecycle of consent and revocation. PhD thesis, University of Warwick.
Barker, Tom Paul (2003) Disclosure and inscription: Heidegger, Derrida, and the technological difference. PhD thesis, University of Warwick.
Barnes, Tina Angela (2000) A framework for the effective management of collaborative R&D projects : executive summary. EngD thesis, University of Warwick.
Betts, Benjamin W. (2013) Changing the model of workplace e-learning : a platform to facilitate autonomous social e-learning for adult learners : Innovation report. EngD thesis, University of Warwick.
Bryer, R. A. (1977) Theoretical foundations of operational research. PhD thesis, University of Warwick.
Bugeja, Keith (2015) High-fidelity graphics using unconventional distributed rendering approaches. PhD thesis, University of Warwick.
Clough, A. R. (2013) A study on the near-field interactions of ultrasonic surface waves with surface-breaking defects. PhD thesis, University of Warwick.
Dubla, Piotr (2012) Interactive global illumination on the CPU. PhD thesis, University of Warwick.
Guah, Matthew W. (2005) Institutionalization and de-institutionalization processes in the UK healthcare system : the role of emerging technologies. PhD thesis, University of Warwick.
Hemais, Carlos Alberto (1992) Firm-level transfer of technology : an empirical study of modes of international commercialisation of technology in British industry. PhD thesis, University of Warwick.
Hulusić, Vedad (2011) Auditory-visual interaction in computer graphics. PhD thesis, University of Warwick.
James, D. J. G. (1971) Dynamics of model-reference and hill climbing systems. PhD thesis, University of Warwick.
Kazmi, Nayyar A. (2013) Multipath selection for resilient network routing. PhD thesis, University of Warwick.
Liu, Jiawei (1998) A corpus-based investigation of the lexis of the postgraduate engineering textbooks with reference to the needs of Southeast Asian students. PhD thesis, University of Warwick.
McDougall, Heather S. (2011) Starting the journey towards manufacturing excellence : MX Start. Innovation report. EngD thesis, University of Warwick.
Morris, Godfrey Deigan (1972) An optimal resource allocation model for corporate tactical planning. PhD thesis, University of Warwick.
Ng, Tat Lun (1996) Improvement of product development cycle time and cost by applying concurrent integrated design and assembly planning : executive summary. PhD thesis, University of Warwick.
Njihia, James Muranga (2008) ICT for development reconsidered: a critical realist approach to the strategic context in Kenya's transition to e-governance. PhD thesis, University of Warwick.
Oshri, Ilan (2002) Cross-project learning : a study based on the Israeli electronics defence industry. PhD thesis, University of Warwick.
Oyinlola, Muyiwa Adeyinka (2015) Heat transfer in solar absorber plates with micro-channels. PhD thesis, University of Warwick.
Qaddoum, Kefaya (2013) Intelligent real-time decision support systems for tomato yield prediction management. PhD thesis, University of Warwick.
Ramić-Brkić, Belma (2012) The influence of olfaction on the perception of high-fidelity computer graphics. PhD thesis, University of Warwick.
Rosli, M. H. (2013) Surface defect characterisation using non-contact ultrasound. PhD thesis, University of Warwick.
Spina, Sandro (2015) Graph-based segmentation and scene understanding for context-free point clouds. PhD thesis, University of Warwick.
Tako, Antuela Anthi (2008) Development and use of simulation models in Operational Research: a comparison of discrete-event simulation and system dynamics. PhD thesis, University of Warwick.
Tandy, Michael J. (2011) Ambiguity resolution of single frequency GPS measurements. PhD thesis, University of Warwick.
Tayler, Paul J. (1990) Problems of scale : an O.R./systems approach. PhD thesis, University of Warwick.
Yankey, George Sipa-Adjah (1986) The role of the international patent system in the transfer of technology to West Africa : case studies : Ghana and Nigeria. PhD thesis, University of Warwick.