A

Abdullah, Abu, 1960- (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2010) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems Control Conference (DSCC 2009)/Bath/ASME Symposium on Fluid Power and Motion Control, Hollywood, CA, October 12-14, 2009. Published in: ASME 2009 Dynamic Systems and Control Conference, Vol.1 pp. 741-747.

Ali, Syed Z., Udrea, Florin, Milne, W. I. (William I.) and Gardner, J. W. (Julian W.), 1958-. (2008) Tungsten-based SOI microhotplates for smart gas sensors. IEEE Journal of Microelectromechanical Systems, Vol.17 (No.6). pp. 1408-1417. ISSN 1057-7157

Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.

Altoe, Gisele F., Freitas, Jair C. C., Cunha, Alfredo G., Emmerich, Francisco G. and Smith, Mark E.. (2009) Kinetics and C-13 NMR study of oxygen incorporation into PVC- and pitch-derived materials. Energy & Fuels, Vol.23 (No.3 Sp. Iss. SI). pp. 1373-1378. ISSN 0887-0624

Antory, David. (2007) Application of a data-driven monitoring technique to diagnose air leaks in an automotive diesel engine: ada case study. Mechanical Systems and Signal Processing, Vol.21 (No.2). pp. 795-808. ISSN 0888-3270

Apte, A., Jones, C. K. R. T. (Christopher K. R. T.), Stuart, A. M. and Voss, J. (2008) Data assimilation: Mathematical and statistical perspectives. In: 9th ICFD Conference on Numerical Methods for Fluid Dynamics, Univ Reading, Reading, England, 26 - 29 Mar, 2007. Published in: International Journal for Numerical Methods in Fluids, Vol.56 (No.8). pp. 1033-1046.

B

Barkley, D., Blackburn, H. M. and Sherwin, S. J. (2008) Direct optimal growth analysis for timesteppers. In: 14th International Conference on Finite Elements in Flow Problems, Santa Fe, NM, Mar 24-28, 2007. Published in: International Journal for Numerical Methods in Fluids, Vol.57 (No.9). pp. 1435-1458.

Barkley, Dwight. (2011) Simplifying the complexity of pipe flow. Physical Review E, Vol.84 (No.1). Article 016309 . ISSN 1063-651X

Barkley, Dwight and Tuckerman, Laurette S.. (2007) Mean flow of turbulent-laminar patterns in plane Couette flow. JOURNAL OF FLUID MECHANICS, 576 . pp. 109-137. ISSN 0022-1120

Barnes, Stuart, Pashby, I. R. and Mok, D. K.. (1996) The effect of workpiece temperature on the machinability of an aluminum/SiC MMC. Journal of Manufacturing Science and Engineering, Vol.118 (No.3). pp. 422-427. ISSN 1087-1357

Barrow, Mark P., Headley, John V., Peru, Kerry M. and Derrick, Peter J. . (2009) Data visualization for the characterization of naphthenic acids within petroleum samples. Energy & Fuels, Vol.23 (No.5). pp. 2592-2599. ISSN 0887-0624

Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.

Belver, Ali Vasallo, Živanović, Stana, Dang, HiepVu, Istrate, Melania and Iban, Antolin Lorenzana (2012) Modal testing and FE model updating of a lively staircase structure. In: IMAC XXX Conference and Exhibition on Structural Dynamics, Jacksonville, FL, U.S.A., Jan 30 - Feb 2, 2012. Published in: Topics in Modal Analysis 1, Vol. 5, Conference Proceedings of the Society for Experimental Mechanics Series, Vol.30 pp. 547-557.

Bennett, P., Stovin, V. R. and Guymer, I. (2011) Improved CFD simulation approaches for manhole mixing investigations. In: 12th International Conference on Urban Drainage, Porto Alegre, Brazil, Sep 11-16, 2011

Brend, M. A. and Thomas, P. J. (Peter J.). (2009) Decay of vortex rings in a rotating fluid. Physics of Fluids, Vol.21 (No.4). Article 044105. ISSN 1070-6631

Bryant, Angus T., Jennings, M. R., Parker-Allotey, Nii-Adotei, Mawby, P. A. (Philip A.), Pérez-Tomás, Amador, Brosselard, P., Godignon, P., Jorda, X., Milian, J., Palmer, P. R., Santi, E. and Hudgins, J. L. (2009) Physical modelling of large area 4H-SiC PiN diodes. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, September 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 494-501.

Bryden, B. G. and Pashby, I. R.. (1999) Sequential laminated tooling, joined by brazing, for injection moulding. RAPID PROTOTYPING JOURNAL, 5 (2). pp. 89-93. ISSN 1355-2546

Buescu, Jorge, Kulczycki, Marcin and Stewart, Ian, 1945-. (2006) Liapunov stability and adding machines revisited. Dynamical Systems, Vol.21 (No.3). pp. 379-384. ISSN 1468-9367

Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.

C

Cai, Yong and Mias, Christos. (2009) Faster 3D finite element time domain : Floquet absorbing boundary condition modelling using recursive convolution and vector fitting. IET Microwaves Antennas & Propagation, Vol.3 (No.2). pp. 310-324. ISSN 1751-8725

Cantwell, C. D., Barkley, D. and Blackburn, H. M.. (2010) Transient growth analysis of flow through a sudden expansion in a circular pipe. Physics of Fluids, Vol.22 (No.3). Article no. 034101. ISSN 1070-6631

Carpenter, P. W. (Peter William), 1942- (2007) Preface. Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 203-204. ISSN 1386-6184

Cartes, Carlos, Bustamante, Miguel D. and Brachet, Marc E.. (2007) Generalized Eulerian-Lagrangian description of Navier-Stokes dynamics. Physics of Fluids, Vol.19 (No.7). Article: 077101. ISSN 1070-6631

Cartes, Carlos, Bustamante, Miguel D., Pouquet, Annick and Brachet, Marc E.. (2009) Capturing reconnection phenomena using generalized Eulerian-Lagrangian description in Navier-Stokes and resistive MHD. Fluid Dynamics Research, Vol.41 (No.1). Article no. 011404. ISSN 0169-5983

Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.

Chen, Cheng, Ricles, James M., Karavasilis, Theodore L., Chae, Yunbyeong and Sause, Richard. (2012) Evaluation of a real-time hybrid simulation system for performance evaluation of structures with rate dependent devices subjected to seismic loading. Engineering Structures, Vol. 35 . pp. 71-82. ISSN 01410296

Chen, Cheng, Ricles, James M., Sause, Richard and Karavasilis, Theodore L. (2009) Real-time hybrid simulation with adaptive actuator control for structural engineering research. In: 3rd International Conference on Advances in Experimental Structural Engineering (3AESE), San Francisco, CA, U.S.A., Oct 15-16, 2009. Published in: Proceedings of the 3rd International Conference on Advances in Experimental Structural Engineering (3AESE)

Chen, Ting and Li, S. C.. (2011) Numerical investigation of guide-plate induced pressure fluctuations on guide vanes of Three Gorges turbines. Journal of Fluids Engineering, Vol.133 (No.6). article no. 061101. ISSN 0098-2202

Chen, Yangzhi, Liu, X., Chetwynd, D. G. (Derek G.), 1948- and Huang, P.. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. ISSN 0094-114X

Cheng, C., McGordon, Andrew, Jones, R. Peter and Jennings, P. A.. (2012) Development of a comprehensive and flexible forward dynamic powertrain simulation tool for various hybrid electric vehicle architectures. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.226 (No.3). pp. 385-398. ISSN 0954-4070

Cheng, Caizhen and Cebon, David. (2008) Improving roll stability of articulated heavy vehicles using active semi-trailer steering. Vehicle System Dynamics, Vol.46 (Suppl.1). pp. 373-388. ISSN 0042-3114

Cheng, Caizhen and Cebon, David. (2011) Parameter and state estimation for articulated heavy vehicles. Vehicle System Dynamics, Vol.49 (No.1-2). pp. 399-418. ISSN 0042-3114

Cheng, Caizhen, McGordon, Andrew, Jones, R. Peter and Jennings, P. A. (2010) Comprehensive forward dynamic HEV powertrain modelling using dymola and MATLAB/Simulink. In: 6th IFAC Symposium "Advances in Automotive Control", Munich, Germany, Jul 12-14, 2010. Published in: Proceedings of the 6th IFAC Symposium "Advances in Automotive Control" pp. 536-541.

Cheng, Caizhen, Roebuck, Richard, Odhams, Andrew and Cebon, David. (2011) High-speed optimal steering of a tractor–semitrailer. Vehicle System Dynamics, Vol.49 (No.4). pp. 561-593. ISSN 0042-3114

Cherni, Judith A., Dyner, Isaac, Henao, Felipe, Jaramillo, Patricia, Smith, Ricardo and Font, Raul Olalde. (2007) Energy supply for sustainable rural livelihoods. A multi-criteria decision-support system. Energy Policy, Vol.35 (No.3). pp. 1493-1504. ISSN 0301-4215

Chetwynd, D. G. (Derek G.), 1948- and Alsoufi, Mohammad S. (2010) A novel micro-friction measuring-head using force-feedback compensation. In: 6th International Symposium on Precision Engineering Measurements and Instrumentation, Hangzhou, 8-11 Aug 2010. Published in: SPIE Proceedings, Vol.7544 article 754417.

Cheung, David L. and Schmidt, M. (Matthias). (2009) Quenched-annealed density functional theory for interfacial behavior of hard rods at a hard rod matrix. Journal of Chemical Physics, Vol.131 (No.21). p. 214705. ISSN 0021-9606

Christou, George and Mias, Christos. (2011) Critique of optical negative refraction superlensing. Plasmonics, Vol.6 (No.2). pp. 307-309. ISSN 1557-1955

Cooper, A. J.. (2006) Effect of mean entropy on unsteady disturbance propagation in a slowly varying duct with mean swirling flow. Journal of Sound and Vibration, Vol.291 (No.3-5). pp. 779-801. ISSN 0022-460X

Cooper, A. J. and Peake, N.. (2006) Transient growth and rotor-stator interaction noise in mean swirling duct flow. JOURNAL OF SOUND AND VIBRATION, 295 (3-5). pp. 553-570. ISSN 0022-460X

Critoph, Robert E., Metcalf, Steven John and Tamainot-Telto, Zacharie. (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. ISSN 0145-7632

Critoph, Robert E., Tamainot-Telto, Zacharie and Metcalf, Steven John (2008) Development of heat driven compressors for heat pump and refrigeration applications. In: International Conference on Energy Technologies and Policy 2008, Birmingham, U.K., Sep 8-10, 2008

D

Da Campo, Raffaello, Barrow, Mark P., Shepherd, Andrew G., Salisbury, Malcolm and Derrick, Peter J.. (2009) Characterization of naphthenic acid singly charged noncovalent dimers and their dependence on the accumulation time within a hexapole in fourier transform ion cyclotron resonance mass spectrometry. Energy & Fuels, Vol.23 . pp. 5544-5549. ISSN 0887-0624

Das, Aruneema, Stocks, Nigel G. and Hines, Evor, 1957-. (2009) Enhanced coding for exponentially distributed signals using suprathreshold stochastic resonance. Communications in Nonlinear Science and Numerical Simulation, Vol.14 (No.1). pp. 223-232. ISSN 1007-5704

Dickens, P. M., Stangroom, R., Greul, M., Holmer, B., Hon, K. K. B., Hovtun, R., Neumann, R., Noeken, S. and Wimpenny, D.. (1995) Conversion of RP models to investment castings. RAPID PROTOTYPING JOURNAL, 1 (4). pp. 4-11. ISSN 1355-2546

Du, Y. P., Qu, Z. G., Zhao, Chang-Ying and Tao, W. Q.. (2010) Numerical study of conjugated heat transfer in metal foam filled double-pipe. International Journal of Heat and Mass Transfer, Vol.53 (No.21-22). pp. 4899-4907. ISSN 0017-9310

Dunnett, S. N. and Corbett, A. E. (1997) A counter-rotating axial-airgap induction generator using pole changing windings for developing country use. Mechanical Engineering Publications Ltd., pp. 81-88. ISBN 1860580343

Dunstan, P. J. and Li, Shengcai. (2010) Cavitation enhancement of silt erosion : numerical studies. Wear, Vol.268 (No.7-8). pp. 946-954. ISSN 0043-1648

E

Evans, T. S., Quarini, Giuseppe Leonardo and Shire, G. S. F.. (2008) Investigation into the transportation and melting of thick ice slurries in pipes. International Journal of Refrigeration, Vol.31 (No.1). pp. 145-151. ISSN 0140-7007

Evernden, M. C. and Mottram, J. Toby (James Toby), 1958-. (2011) Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering: an international journal, Vol.14 (No.6). pp. 991-1004. ISSN 1369-4332

F

Fan, X., Masters, I., Roy, R. and Williams, D.. (2007) Simulation of distortion induced in assemblies by spot welding. Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture, Vol.221 (No.8). pp. 1317-1327. ISSN 0954-4054

Fan, Xiaolei, Chen, Haisheng, Ding, Yulong, Plucinski, Pawel K. and Lapkin, Alexei. (2008) Potential of ‘nanofluids’ to further intensify microreactors. Green Chemistry, Vol.10 (No.6). pp. 670-677. ISSN 1463-9262

Fang, Yueping, Eames, Philip C. and Norton, Brian. (2007) Effect of glass thickness on the thermal performance of evacuated glazing. SOLAR ENERGY, 81 (3). pp. 395-404. ISSN 0038-092X

Fang, Yueping, Eames, Philip C., Norton, Brian, Hyde, Trevor J., Zhao, Junfu, Wang, Jinlei and Huang, Ye. (2007) Low emittance coatings and the thermal performance of vacuum glazing. SOLAR ENERGY, 81 (1). pp. 8-12. ISSN 0038-092X

Farley, Jonathan, Wrobel, L. C. (Luiz C.), 1952- and Mao, K.. (2010) Low cycle fatigue simulation and fatigue life prediction of multilayer coated surfaces. Wear, Vol.269 (No.9-10). pp. 639-646. ISSN 0043-1648

Farley, Jonathan, Wrobel, L. C. (Luiz C.), 1952- and Mao, K.. (2010) Performance evaluation of multilayer thin film coatings under mixed rolling-sliding dry contact conditions. Wear, Vol.268 (No.1-2). pp. 269-276. ISSN 0043-1648

Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.

Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.

Floro, Daniela (2009) Selecting oligopolistic models in the Italian wholesale electricity market. In: 6th International Conference on the European Energy Market, Leuven, Belgium, May 27-29, 2009. Published in: 2009 6th International Conference on the European Energy Market pp. 329-334.

Fonseca, Irene, Morini, Massimiliano and Slastikov, Valeriy. (2007) Surfactants in foam stability: a phase-field model. Archive for Rational Mechanics and Analysis, Vol.183 (No.3). pp. 411-456. ISSN 0003-9527

Fouxon, Itzhak and Horvai, Peter (2007) Fluctuation relation and pairing rule for Lyapunov exponents of inertial particles in turbulence. JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT (AUG). -. ISSN 1742-5468

Fyodorov, Yan V., Ossipov, Alexander and Rodriguez, Alberto. (2009) The Anderson localization transition and eigenfunction multifractality in an ensemble of ultrametric random matrices. Journal of Statistical Mechanics: Theory and Experiment, Vol.2009 (December). Article no. L12001. ISSN 1742-5468

G

Gallagher, S. J., Norton, B. and Eames, P. C.. (2007) Quantum dot solar concentrators: Electrical conversion efficiencies and comparative concentrating factors of fabricated devices. SOLAR ENERGY, 81 (6). pp. 813-821. ISSN 0038-092X

Galtier, S. and Nazarenko, Sergey. (2008) Large-scale magnetic field sustainment by forced MHD wave turbulence. Journal of Turbulence, Vol.9 (No.40). pp. 1-10. ISSN 1468-5248

Gelfreich, Vassili and Gelfreikh, N.. (2010) Unique normal forms for area preserving maps near a fixed point with neutral multipliers. Regular and Chaotic Dynamics, Vol.15 (No.2-3). pp. 300-318. ISSN 1560-3547

Gelfreich, Vassili and Turaev, D.. (2010) Universal dynamics in a neighborhood of a generic elliptic periodic point. Regular and Chaotic Dynamics, Vol.15 (No.2-3). pp. 159-164. ISSN 1560-3547

Gerbig, Y. B., Ahmed, S. I. -U. and Chetwynd, D. G. (Derek G.). (2008) Friction and wear behaviour of pyramidal nanoscaled surface features. Wear, Vol.265 (No.3-4). pp. 497-506. ISSN 0043-1648

Gerbig, Y. B., Ahmed, S. I. -U., Chetwynd, D. G. (Derek G.), 1948- and Haefke, H.. (2006) Topography-related effects on the lubrication of nanostructured hard surfaces. TRIBOLOGY INTERNATIONAL, 39 (9). pp. 945-952. ISSN 0301-679X

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100

Giovanni, Bruno, Efremov, Alexander M., An, Chong P., Wheaton, Bryan R. and Hughes, Darren J.. (2012) Connecting the macro and microstrain responses in technical porous ceramics. Part II : microcracking. Journal of Materials Science, Vol.47 (No.8). pp. 3674-3689. ISSN 0022-2461

Giudice, Sebastiano D., Jennings, P. A., Cain, Rebecca, Humphreys, Louise and Song, W. (2011) Perceptual dimensions for electric vehicle sound quality. In: 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, Jun 13-16, 2010. Published in: Proceedings of the 39th International Congress and Exposition on Noise Control Engineering, Vol.9 pp. 7012-7021.

Goetz, Arek, van Strien, Sebastian and Vivaldi, Franco (2007) Guest editorial. Dynamical Systems, Vol.22 (No.1). p. 1. ISSN 1468-9367

Gongora, Mario Augusto, 1964- (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.

Gregorio, S. O. (Sandy O.), Haidvogel, D.B., Thomas, P.J., Taskinoglu, E.S. and Skeen, A.J.. (2011) Laboratory and numerical simulations of gravity-driven coastal currents: Departures from geostrophic theory. Dynamics of Atmospheres and Oceans, Vol.52 (No.1-2). pp. 20-50. ISSN 0377-0265

Gregorio, S. O. (Sandy O.), Thomas, P. J. (Peter J.), Brend, M. A. and Linden, P. F. (2008) Large-scale and small-scale laboratory simulations of gravity-driven coastal currents. In: 2008 Ocean Sciences Meeting, Orlando, FL, U.S.A., Mar 2-7, 2008. Published in: 2008 Ocean Sciences Meeting Abstract Book p. 143.

Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J.. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. ISSN 0933-5137

Guild, F. J., Green, M. D., Stewart, R. and Goodship, V.. (2008) Air-plasma pre-treatment for polypropylene automotive bumpers. Journal of Adhesion, Vol.84 (No.6). pp. 530-542. ISSN 0021-8464

Guo, Yue, Rao, Arun Chakrapani and Jones, R. Peter (2008) Architectural and Functional Modelling of an Automotive Driver Information System Using SysML. In: IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, Beijing, China, Oct 12-15, 2008. Published in: Proceedings of the 2008 IEEE/ASME international Conference on Mechatronic and Embedded Systems and Applications pp. 552-557.

Guyez, Estelle Marie Chantal and Thomas, P. J.. (2009) Effects of particle properties on segregation-band drift in particle-laden rimming flow. Physics of Fluids, Vol.21 (No.3). Article 033301. ISSN 1070-6631

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2008) Dynamics of band drift in particle-laden rimming flow. In: The 7th EUROMECH Fluid Mechanics Conference, University of Manchester, Manchester, U.K., Sep 14-18, 2008. Published in: EFMC7 Book of Abstracts p. 129.

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2008) Particle-laden rimming flow: dynamics of segregation banding. In: 50th British Applied Mathematics Colloquium, Manchester, U.K., Mar 31 - Apr 3, 2008

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2011) Segregation-band dynamics in particle-laden rimming flow. In: EUROMECH Colloquium 525 on Instabilities and Transition in Three-Dimensional Flows with Rotation, Lyon, France, Jun 21-23, 2011. Published in: Proceedings of EUROMECH Colloquium 525

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2009) The spatiotemporal dynamics of segregation-band drift in particle-laden rimming flow. In: Institute of Mathematics and its Applications Conference on Dense Granular Flows, Isaac Newton Institute, Cambridge, UK, Jan 5-9, 2009

H

Hamilton, Ross, 1971- (1997) Continuous path : the evolution of process control technologies in post-war Britain. PhD thesis, University of Warwick.

Han, L., Chrysanthou, A., Young, Ken and O'Sullivan, J. M.. (2006) Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. Fatigue & Fracture of Engineering Materials & Structures, Vol.29 (No.8). pp. 646-654. ISSN 8756-758X

Han, L., Thornton, Martin, Li, D. and Shergold, M. (2010) Effect of setting velocity on self-piercing riveting process and joint behaviour for automotive applications. In: SAE 2010 World Congress & Exhibition, Detroit, MI, U.S.A., Apr 12-15, 2010. Published in: SAE Technical Papers

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, M.. (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. ISSN 0924-0136

Han, Li, Thornton, Martin and Shergold, M.. (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. ISSN 0264-1275

Hancox, I., Chauhan, K. V., Sullivan, Paul J., Hatton, Ross A., Moshar, A., Mulcahy, C. P. A. and Jones, T. S.. (2010) Increased efficiency of small molecule photovoltaic cells by insertion of a MoO3 hole-extracting layer. Energy & Environmental Science, Vol.3 (No.1). pp. 107-110. ISSN 1754-5692

Hazra, S. (Sumit), Williams, D. K. (David K.), Roy, Rajat and Aylmore, R.. (2008) Detecting subtle cosmetic defects in automotive skin panels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 222 (Number 11). pp. 2203-2207. ISSN 0954-4062

He, Xiaocong, Pearson, Ian T. and Young, K. (Ken) (2008) Self-pierce riveting for sheet materials : state of the art. Journal of Materials Processing Technology, Vol.199 (No.1-3). pp. 27-36. ISSN 0924-0136

He, Xiaocong, Pearson, Ian T. and Young, Ken (2006) Free vibration characteristics of SPR joints. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Turin, ITALY, JUL 04-07, 2006. Published in: Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 3 pp. 159-167.

He, Xinyu. (2007) An example of finite-time singularities in the 3d Euler equations. Journal of Mathematical Fluid Mechanics, Vol.9 (No.3). pp. 398-410. ISSN 1422-6928

Holm, D. D. and Kerr, Robert M.. (2007) Helicity in the formation of turbulence. Physics of Fluids, Vol.19 (No.2). Article: 025101. ISSN 1070-6631

Howell, R. M., Lucey, A. D., Carpenter, P. W. (Peter William), 1942- and Pitman, M. W. (2009) Interaction between a cantilevered-free flexible plate and ideal flow. In: 7th FSI, AE and FIV Plus N Symposium held at the 2006 PV and P Conference, Vancouver, Canada, 2006. Published in: Journal of Fluids and Structures, Vol.25 (No.3). pp. 544-566.

Howell, Richard M., Lucey, Anthony D. and Carpenter, P. W. (Peter William), 1942- (2007) Instability of a cantilevered flexible plate in inviscid channel flow. In: 6th Symposium on Fluid-Structure Interactions, Aeroelasticity and Flow-Induced Vibration and Noise, Vancouver, CANADA, JUL 23-27, 2006. Published in: PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE VOL 9 pp. 769-776.

Huang, Tian, Liu, H. T. and Chetwynd, D. G. (Derek G.), 1948-. (2011) Generalized Jacobian analysis of lower mobility manipulators. Mechanism and Machine Theory, Vol.46 (No.6). pp. 831-844. ISSN 0094-114X

I

Izquierdo, L. E., Hu, S. Jack, Du, Hao, Jin, Ran, Jee, Haeseong and Shi, Jianjun. (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. Journal of Manufacturing Science and Engineering, Vol.131 (No.4). Article no. 041008. ISSN 1087-1357

J

Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.

Jenkins, D. P., Singh, H. and Eames, Philip C.. (2009) Interventions for large-scale carbon emission reductions in future UK offices. Energy and Buildings, Vol.41 (No.12). pp. 1374-1380. ISSN 0378-7788

Jennings, P. A., Dunne, G., Williams, R. and Giudice, Sebastiano D.. (2010) Tools and techniques for understanding the fundamentals of automotive sound quality. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.224 (No.10). pp. 1263-1278. ISSN 0954-4070

Jones, P. (Peter), Dr., Mao, Ken, Phang, A. and Allen, B.. (2011) Effects of linear and angular misalignment on a spur gear pair. Insight, Vol.53 (No.8). pp. 420-425. ISSN 1354-2575

Jung, Seo Yoon and Chung, Yongmann M.. (2012) Large-eddy simulation of accelerated turbulent flow in a circular pipe. International Journal of Heat and Fluid Flow, Volume 33 (Number 1). pp. 1-8. ISSN 0142727X

K

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Drift and ductility estimates in regular steel MRF subjected to ordinary ground motions : a design-oriented approach. Earthquake Spectra, Vol.24 (No.2). pp. 431-451. ISSN 8755-2930

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Estimation of seismic inelastic deformation demands in plane steel MRF with vertical mass irregularities. Engineering Structures, Vol.30 (No.11). pp. 3265-3275. ISSN 0141-0296

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Seismic response of plane steel MRF with setbacks: estimation of inelastic deformation demands. Journal of Constructional Steel Research, Vol.64 (No.6). pp. 644-654. ISSN 0143-974X

Karavasilis, Theodore L., Kerawala, Sanaya and Hale, Emma. (2012) Hysteretic model for steel energy dissipation devices and evaluation of a minimal-damage seismic design approach for steel buildings. Journal of Constructional Steel Research, Vol.70 . pp. 358-367. ISSN 0143-974X

Karavasilis, Theodore L., Makris, Nicos, Bazeos, Nikitas and Beskos, D. E.. (2010) Dimensional response analysis of multistorey regular steel MRF subjected to pulselike earthquake ground motions. Journal of Structural Engineering, Vol.136 (No.8). pp. 921-932. ISSN 0733-9445

Karavasilis, Theodore L., Sause, Richard, Chae, Yunbyeong, Ricles, James M. and Chen, Cheng (2010) Design and experimental evaluation of steel MRF with magneto-rheological dampers for seismic hazard mitigation. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 111 pp. 767-773.

Karavasilis, Theodore L., Sause, Richard, Ricles, James M. and Chen, Cheng (2009) Large-scale real-time hybrid simulation of steel MRFs equipped with compressed elastomer dampers. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 10 pp. 67-72.

Kendall, K., Du, S., Morris, S. and Sweet, C.. (2010) Virus concentration and adhesion measured by laser tracking. Journal of Adhesion, Vol.86 (No.10 Sp. Iss. SI). pp. 1029-1040. ISSN 0021-8464

Kerr, Robert M. (2006) Helicity generation in three-dimensional Euler and turbulence. In: IUTAM Symposium on Elecmentary Vortices and Coherent Structures - Significance in Turbulence Dynamics, Kyoto, JAPAN, OCT 26-28, 2004. Published in: IUTAM Symposium on Elementary Vortices and Coherent Structures: Significance in Turbulence Dynamics, 79 pp. 329-337.

Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.

Khovanova, N. A. and Khovanov, I. A.. (2011) The role of excitations statistic and nonlinearity in energy harvesting from random impulsive excitations. Applied Physics Letters, Vol.99 (No.14). Article: 144101144101. ISSN 0003-6951

Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.

King, G. P., Rudman, Murray and Rowlands, G. (George). (2008) Chaotic diffusion in steady wavy vortex flow - Dependence on wave state and correlation with Eulerian symmetry measures. Fluid Dynamics Research, Vol.40 (No.1). pp. 45-67. ISSN 0169-5983

Kituara, Hidekazu, Murai, Yuichi, Takeda, Yasushi and Thomas, P. J. (Peter J.). (2010) Velocity vector field measurement of vortex rings using UVP. Transactions of the Japanese Society of Mechanical Engineers, Vol.76 (No.772). pp. 2143-2151. ISSN 0387-5016

Kudar, K. L. and Carpenter, P. W. (Peter William), 1942-. (2007) Numerical investigation and feasibility study of a PZT-driven micro-valve pulsed-jet actuator. Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 223-254. ISSN 1386-6184

Kudar, Karen L. and Carpenter, P. W. (Peter William), 1942- (2008) Numerical investigation of a micro-valve pulsed-jet actuator. In: IUTAM Symposium on Flow Control and MEMS, Royal Geog Soc, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 pp. 45-51.

L

Lewis, W. J., Brew, J. S., Bryanston-Cross, P. and Nawasra, J. S.. (2011) Form-finding as a modelling tool for shaping mechanical components: a feasibility case study of an axial-flow compressor blade. Engineering Structures, Vol.33 (No.9). pp. 2612-2620. ISSN 0141-0296

Li, Shuai and Li, Shengcai (2009) Interaction of single laser generated cavitation bubble with elastic boundary. In: International Conference on Experimental Fluid Mechanics, Liberec, Czech Republic, November 25-27, 2009. Published in: Proceedings of the International Conference on Experimental Fluid Mechanics 2009 pp. 196-211.

Li, Shuai and Li, Shengcai (2009) Interaction of two laser induced cavitation bubbles. In: International Conference on Experimental Fluid Mechanics, Liberec, Czech Republic, November 25-27, 2009. Published in: Proceedings of the International Conference on Experimental Fluid Mechanics 2009 pp. 179-196.

Li, Wei, Wood, A., Weidig, R. and Mao, K.. (2011) An investigation on the wear behaviour of dissimilar polymer gear engagements. Wear, Vol.271 (No.9-10). pp. 2176-2183. ISSN 0043-1648

Li, Y. G., Liu, H. T., Zhao, X. M., Huang, Tian and Chetwynd, D. G. (Derek G.), 1948-. (2010) Design of a 3-DOF PKM module for large structural component machining. Mechanism and Machine Theory, Vol.45 (No.6). pp. 941-954. ISSN 0094-114X

Li, Z., Izquierdo, L. E., Kokkolaras, M., Hu, S. J. and Papalambros, Panos Y. (2008) Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly. Journal of Manufacturing Science and Engineering, Volume 130 (Number 4). 0445011-0445016. ISSN 1087-1357

Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.

Li S., , Zuo Z. G., and Li S. C., (2006) Stochastic study of cavitation bubbles near boundary wall. In: Conference on Global Chinese Scholars on Hydrodynamics, Shanghai, PEOPLES R CHINA, JUL 11-14, 2006. Published in: Proceedings of the Conference of Global Chinese Scholars on Hydrodynamics pp. 487-491.

Li S. C., , Wu Y. L., , Dai J., , Zuo Z. G., and Li S., (2006) Cavitation resonance: The phenomenon and unknown. In: Conference on Global Chinese Scholars on Hydrodynamics, Shanghai, PEOPLES R CHINA, JUL 11-14, 2006. Published in: Proceedings of the Conference of Global Chinese Scholars on Hydrodynamics pp. 356-362.

Liu, H., Huang, Tian and Chetwynd, D. G. (Derek G.), 1948-. (2011) A method to formulate a dimensionally homogeneous Jacobian of parallel manipulators. IEEE Transactions on Robotics, Vol.27 (No.1). pp. 150-156. ISSN 1552-3098

Liu, H. T., Huang, T., Zhao, X. M., Mei, J. P. and Chetwynd, D. G. (Derek G.), 1948-. (2007) Optimal design of the TriVariant robot to achieve a nearly axial symmetry of kinematic performance. MECHANISM AND MACHINE THEORY, 42 (12). pp. 1643-1652. ISSN 0094-114X

Liu, Haitao, Huang, T. (Tian) and Chetwynd, D. G. (Derek G.), 1948-. (2011) An approach for acceleration analysis of lower mobility parallel manipulators. Journal of Mechanisms and Robotics, Vol.3 (No.1). 011013. ISSN 19424302

Liu, Haitao, Huang, T. (Tian) and Chetwynd, D. G. (Derek G.), 1948-. (2011) A general approach for geometric error modeling of lower mobility parallel manipulators. Journal of Mechanisms and Robotics, Vol.3 (No.2). 021013. ISSN 19424302

Liu, Haitao, Huang, Tian, Mei, Jianping, Zhao, Xueman, Chetwynd, D. G. (Derek G.), 1948-, Li, Meng and Hu, S. Jack. (2007) Kinematic design of a 5-DOF hybrid robot with large workspace/limb-stroke ratio. Journal of Mechanical Design, Vol.129 (No.5). pp. 530-537. ISSN 1050-0472

Liu, Kuo-Kang, Wu, Ren-Guei, Chuang, Yun-Ju, Khoo, Hwa Seng, Huang, Shih-Hao and Tseng, Fan-Gang (2010) Microfluidic systems for biosensing. Sensors, Vol.10 (No.7). pp. 6623-6661. ISSN 1424-8220

Liu, Shuhong, Li, Shengcai and Wu, Yulin. (2009) Pressure fluctuation prediction of a model Kaplan turbine by unsteady turbulent flow simulation. Journal of Fluids Engineering, Vol.131 (No.10). p. 101102. ISSN 0098-2202

Liu, X., Yue, Zhaoyang, Cai, Z., Chetwynd, D. G. (Derek G.), 1948- and Smith, S. T. (Stuart T.), 1961-. (2008) Quantifying touch-feel perception : tribological aspects. Measurement Science and Technology, Vol.19 (No.8). Article: 084007. ISSN 0957-0233

Lockerby, D. A. and Reese, J. M. (2007) Near-wall scaling of the Navier-Stokes constitutive relations for accurate micro gas flow simulations. In: 5th International Conference on Nanochannels, Microchannels, and Minichannels, Puebla, MEXICO, JUN 18-20, 2007. Published in: ICNMM2007: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS pp. 357-363.

Lockerby, Duncan A., Carpenter, P. W. (Peter William), 1942- and Davies, Christopher (2008) Is Helmholtz resonance a problem for micro-jet actuators? In: IUTAM Symposium on Flow Control and MEMS, Royal Geographical Society, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 (Part 2). pp. 95-101.

Lockerby, Duncan A., Carpenter, P. W. (Peter William), 1942- and Davies, Christopher. (2007) Is Helmholtz resonance a problem for micro-jet actuators? Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 205-222. ISSN 1386-6184

Lockerby, Duncan A., Reese, Jason and Struchtrup, Henning. (2009) Switching criteria for hybrid rarefied gas flow solvers. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.465 (No.2105). pp. 1581-1598. ISSN 1364-5021

Lockerby, Duncan A., Struchtrup, Henning and Reese, Jason M.. (2008) Switching criteria for hybrid rarefied gas flow solvers. Rarefied Gas Dynamics: Proceedings of the 26th International Symposium on Rarefied Gas Dynamics, Vol.1084 . pp. 434-440. ISSN 0094-243X

Lu, Dawei, Barnes, Stuart and Minor, K. (2004) Removed and damaged area prediction in PMC laser machining using artificial neural networks. In: International Conference on the Behaviour of Materials in Machining, University of Warwick, 15th - 17th November 2004. Published in: Proceedings of the International Conference on the Behaviour of Materials in Machining pp. 290-297. (Unpublished)

Lu, Wei and Zhao, Chang-Ying. (2009) Numerical modelling of flow boiling heat transfer in horizontal metal-foam tubes. Advanced Engineering Materials, Vol.11 (No.10). pp. 832-836. ISSN 1438-1656

Luo, Xing, Sun, Hao and Wang, Jihong (2011) An energy efficient pneumatic-electrical system and control strategy development. In: American Control Conference 2011 (ACC), San Francisco, California, USA, June 29 - July 1, 2011. Published in: Proceedings of the American Control Conference, 2011 pp. 4743-4748.

M

Ma, He, Xu, Hong-Ming and Wang, Ji-Hong. (2011) Real-time control oriented HCCI engine cycle-to-cycle dynamic modelling. International Journal of Automation and Computing , Vol.8 (No.3). pp. 317-325. ISSN 1476-8186

MacKay, R. S.. (2006) Cerbelli and Giona's map is pseudo-Anosov and nine consequences. Journal of Nonlinear Science, Vol.16 (No.4). pp. 415-434. ISSN 0938-8974

Mahmood, N. H. and Tjahjadi, Tardi (2010) 3D reconstruction for prosthetic design. In: 2010 Second International Conference on Computer Engineering and Applications (ICCEA), Bali Island, Indonesia, Mar 19-21, 2010. Published in: Proceedings of the 2010 Second International Conference on Computer Engineering and Applications (ICCEA), Vol.1 pp. 431-435.

Mahmoudi, Shiva, Baeyens, Jan and Seville, Jonathan P. K.. (2010) NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass and Bioenergy, Vol.34 (No.9). pp. 1393-1409. ISSN 0961-9534

Malard, B., Pilch, J., Sittner, P., Davydov, V. (Vadim), Sedlák, P., Konstantinidis, K. and Hughes, Darren J.. (2012) Internal stresses in steel plate generated by shape memory alloy inserts. Acta Materialia, Vol.60 (No.3). pp. 1378-1394. ISSN 1359-6454

Mallick, Tapas K. and Eames, Philip C.. (2007) Design and fabrication of low concentrating second generation PRIDE concentrator. Solar Energy Materials and Solar Cells, Vol.91 (No.7). pp. 597-608. ISSN 0927-0248

Mallick, Tapas K. and Eames, Philip C. (2007) Optical and thermal performance predictions for a high concentration point focus photovoltaic system. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, PEOPLES R CHINA, SEP 18-21, 2007. Published in: PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V pp. 1500-1504.

Mallick, Tapas K., Eames, Philip C. and Norton, Brian. (2007) Power losses in an asymmetric compound parabolic photovoltaic concentrator. Solar Energy Materials and Solar Cells, Vol.91 (No.12). pp. 1137-1146. ISSN 0927-0248

Mao, K., Li, W., Hooke, C. J. and Walton, D.. (2009) Friction and wear behaviour of acetal and nylon gears. Wear, Vol.267 (No.1-4 Part 1 Sp. Iss. SI). pp. 639-645. ISSN 0043-1648

Mao, K., Liebig, W., Hooke, C. J. and Walton, D.. (2010) Polymer gear surface thermal wear and its performance prediction. Tribology International, Vol.43 (No.1-2). pp. 433-439. ISSN 0301-679X

Mao, K., Sun, Y., Bloyce, A. and Bell, T.. (2010) Surface coating effects on contact stress and wear : an approach of surface engineering design and modelling. Surface Engineering, Vol.26 (No.1-2). pp. 142-148. ISSN 0267-0844

Marco, James, Ball, R., Jones, R. P. and Lillie, K.. (2001) A systems modelling and simulation approach to gear shift effort analysis. International Journal of Vehicle Design, Vol.25 (No.4). pp. 317-338. ISSN 0143-3369

Marco, James, Ball, R., Jones, R. P. and Roxburgh, A.. (2002) The design and hardware-in-the-loop simulation test of a parallel hybrid transmission control system. International Journal of Vehicle Design, Vol.30 (No.4). pp. 362-385. ISSN 0143-3369

Masters, I., Fan, X., Roy, R. and Williams, D.. (2012) Modelling distortion induced in an assembly by the self piercing rivet process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.226 (No.2). pp. 300-312. ISSN 0954-4054

McDonnell, Mark D., 1975-, Amblard, Pierre-Olivier and Stocks, Nigel G.. (2009) Stochastic pooling networks. Journal of Statistical Mechanics: Theory and Experiment, Vol.2009 (January 2009). Article: P01012. ISSN 1742-5468

Meegahawatte, Danushka, Hillmansen, Stuart, Roberts, Clive, Falco, Marco, McGordon, Andrew and Jennings, Paul (2010) Analysis of a fuel cell hybrid commuter railway vehicle. In: Spring Meeting of the European-Materials-Research-Society, Strasbourg, FRANCE, JUN 08-12, 2009. Published in: Journal of Power Sources, Vol.195 (No.23). pp. 7829-7837.

Meredith, James O., Cozien-Cazuc, Sophie, Collings, Ed, Carter, Sam, Alsop, Stewart, Lever, Jon, Coles, Stuart R., Wood, Benjamin M. and Kirwan, Kerry. (2012) Recycled carbon fibre for high performance energy absorption. Composites Science and Technology, Vol.72 (No.6). pp. 688-695. ISSN 0266-3538

Meredith, James O., Ebsworth, Richard, Coles, Stuart R., Wood, Benjamin M. and Kirwan, Kerry. (2012) Natural fibre composite energy absorption structures. Composites Science and Technology, Vol.72 (No.2). pp. 211-217. ISSN 0266-3538

Metcalf, S.J., Tamainot-Telto, Zacharie and Critoph, Robert E. (2008) Novel compact sorption generators for heat pump applications. In: 9th International Energy Agency Heat Pump Conference 2008, Zurich, Switzerland, May 20-22, 2008

Metcalf, Steven John (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.

Moat, R. J., Hughes, Darren J., Steuwer, A., Iqbal, N., Preuss, M., Bray, S. E. and Rawson, M.. (2009) Residual stresses in inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.40 (No.9). pp. 2098-2108. ISSN 1073-5623

Mohamed, Omar, Wang, Jihong, Guo, Shen, Wei, Jianlin, Al-Duri, Bushra, Lv, Junfu and Gao, Qirui (2011) Mathematical modelling for coal fired supercritical power plants and model parameter identification using genetic algorithms. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. Lecture Notes in Electrical Engineering, Vol.90 . Dordrecht, Netherlands: Springer Science+Business Media B.V., pp. 1-13. ISBN 978-94-007-1191-4

Mottram, J. Toby (James Toby), 1958-. (2010) Prediction of net-tension strength for multirow bolted connections of pultruded material using the Hart-Smith semi-empirical modeling approach. Journal of Composites for Construction, Vol.14 (No.1). pp. 105-114. ISSN 1090-0268

Muetze, Annette and Oh, H. William. (2008) Application of static charge dissipation to mitigate electric discharge bearing currents. IEEE Transactions on Industry Applications, Vol.44 (No.1). pp. 135-143. ISSN 0093-9994

Murugaratnam, K. and Utili, S. (2011) Shot peening optimization using the discrete element method. In: 11th International Conference on Shot Peening, South Bend, IN, U.S.A., Sep 12-15, 2011. Published in: Proceedings of the 11th International Conference on Shot Peening pp. 135-140.

N

Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.

Noble, Ralph, Elphinstone, J. G., Sansford, C. E., Budge, G. E. and Henry, C. M. (2009) Management of plant health risks associated with processing of plant-based wastes: a review. Bioresource Technology, Vol.100 (No.14). pp. 3431-3446. ISSN 0960-8524

O

O'Doherty, T., Egarr, D. A., Faram, M. G., Guymer, Ian and Syred, N.. (2009) Assessment of residence time in a hydrodynamic vortex separator by applying distribution models. Institution of Mechanical Engineers. Proceedings. Part E: Journal of Process Mechanical Engineering, Vol.223 (No.E3). pp. 179-188. ISSN 0954-4089

O'Doherty, T., Egarr, D. A., Faram, M. G., Guymer, Ian and Syred, N.. (2009) Residence time study of a hydrodynamic vortex separator applied to predicting disinfection performance. Institution of Mechanical Engineers. Proceedings. Part E: Journal of Process Mechanical Engineering, Vol.223 (No.E3). pp. 113-122. ISSN 0954-4089

Oishi, Y., Brend, M. A., Thomas, P. J. (Peter J.), Murai, Yuichi and Takeda, Yasushi (2008) Measurement of oscillating vortex ring of fundamental mode using color PTV. In: 36th Symposium on Visualisation, Tokyo, Japan, Jul 22-23, 2008. Published in: Proceedings of the 36th Symposium on Visualization

Oliveira, Fernando. (2008) The value of information in electricity investment games. Energy Policy, Vol.36 (No.7). pp. 2364-2375. ISSN 0301-4215

Oswald, Andrew J. , Oswald, James I. and Ashraf-Ball, Hezlin (2009) Hydrogen transport and the spatial requirements of renewable energy. Working Paper. Coventry: University of Warwick, Department of Economics. (Warwick economic research papers.

P

Papadakis, N., Ramirez, C. and Reynolds, N. (2009) Designing composite wind turbine blades for disposal, recycling or reuse. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 443-457. ISBN 9781845694623

Parker, M. J., Stewart, Ian and Gomes, M. G. M.. (2008) Partial classification of heteroclinic behaviour associated with the perturbation of hexagonal planforms. Dynamical Systems, Vol.23 (No.2). pp. 137-162. ISSN 1468-9367

Pavić, Aleksandar, Brownjohn, J.M.W. and Živanović, Stana (2010) VSATs software for assessing and visualising floor vibration serviceability based on first principles. In: 2010 Structures Congress, Orlando, FL, U.S.A., May 12-15, 2010. Published in: Proceedings of the 2010 Structures Congress pp. 82-92.

Pedcenko, A., Molokov, S., Priede, J., Lukyanov, A. and Thomas, P. J.. (2009) Experimental model of the interfacial instability in aluminium reduction cells. EPL (Europhysics Letters), Vol.88 (No.2). Article 24001. ISSN 0295-5075

Pedcenko, A., Molokov, S., Thomas, P. J. (Peter J.), Lukyanov, A. and Priede, J. (2008) Experimental study of interfacial instability in aluminium reduction cells. In: 7th International Pamir Conference on Fundamental and Applied MHD, Presq'uile de Giens, France, Sep 8-12, 2008. Published in: Proceedings of the 7th International Pamir Conference on Fundamental and Applied MHD pp. 923-927.

Petoussis, A. G., Petoussis, S. G., Zhang, X-P. and Godfrey, K. R. (2008) New entries in the electricity market: Choosing the best location for a new generating unit. In: 3rd International Conference on Electric Utility Deregulation, Restructuring and Power Technologies, Nanjing, China, Apr 06-09, 2008. Published in: Proceedings of the 3rd International Conference on Electric Utility Deregulation, Restructuring and Power Technologies, Vol.1 pp. 61-65.

Petoussis, A. G., Petoussis, S. G. and Zhang, X. -P. (2007) Market equilibrium in congested transmission networks with transformer tap-ratio control. In: IEEE Lausanne Powertech, Lausanne, SWITZERLAND, JUL 01-05, 2007. Published in: 2007 IEEE LAUSANNE POWERTECH, VOLS 1-5 pp. 949-954.

Petoussis, S. G., Zhang, X.-P., Petoussis, A. G. and Godfrey, K. R. (2006) The impact of reactive power on the electricity market equilibrium. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 96-102.

Phoomboplab, T. and Ceglarek, Darek. (2008) Process yield improvement through optimum design of fixture layouts in 3D multistation assembly systems. Journal of Manufacturing Science and Engineering, Vol.130 (No.6). ISSN 1087-1357

Pinfold, Martyn, Chapman, Craig and Preston, Steve. (2008) Knowledge acquisition and documentation for the development of a KBE system for automated FE analysis. International Journal of Knowledge Management Studies, Vol.2 (No.2). pp. 163-174. ISSN 1743-8268

R

Raja, Vinesh and Fernandes, Kiran J. (2008) Reverse engineering: an industrial perspective. Springer Series in Advanced Manufacturing, Vol.18 . Godalming, Surrey, U.K.: Springer Verlag London Ltd.. ISBN 978-1-84628-855-5

Redpath, David A. G., Eames, Philip C., Lo, Steve N. G. and Griffiths, Phillip W.. (2009) Experimental investigation of natural convection heat exchange within a physical model of the manifold chamber of a thermosyphon heat-pipe evacuated tube solar water heater. Solar Energy, Vol.83 (No.7). pp. 988-997. ISSN 0038-092X

Reese, Jason M., Lockerby, Duncan A. and Emerson, David R. (2009) Gas dynamics at the micro-scale: a review of progress in hydrodynamic modelling. In: 2nd Micro and Nano Flows Conference, Brunel University, West London, U.K., Sep 1-2, 2009 pp. 1-8. (In Press)

Revell, Philip Scott, 1956- (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.

Ricles, James M., Karavasilis, Theodore L. and Sause, Richard (2009) Seismic design and evaluation of steel MRFs with compressed elastomer dampers. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 15 pp. 101-107.

Roberts, G. J., Bryant, A. T., Mawby, P. A. (Philip A.), Ueta, T., Nisijima, T. and Hamada, K. (2007) Evaluation of silicon carbide devices for hybrid vehicle drives. In: 2007 European Conference on Power Electronics and Applications, Aalborg, DENMARK, SEP 02-05, 2007. Published in: 2007 EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-10 pp. 2662-2671.

S

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Burrows, Clifford R. and Keogh, Patrick S.. (2010) A multiobjective adaptive controller for magnetic bearing systems. Journal of Engineering for Gas Turbines and Power, Vol.132 (No.12). article no. 122503 . ISSN 0742-4795

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, P. S. and Burrows, C. R. (Clifford Robert). (2011) Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal of Engineering for Gas Turbines and Power, Vol.133 (No.2). 022503-1-022503-7. ISSN 0742-4795

Sartbaeva, A., Kuznetsov, V. L., Wells, Stephen A. and Edwards, P. P.. (2008) Hydrogen nexus in a sustainable energy future. Energy & Environmental Science, Vol.1 (No.1). pp. 79-85. ISSN 1754-5692

Satti, Teysseer, Young, Ken and Grover, Samuel. (2009) Detecting catastrophic failure events in large-scale milling machines. International Journal of Machine Tools and Manufacture, Vol.49 (No.14). pp. 1104-1113. ISSN 0890-6955

Savan, Alan, Wosik, Jaroslaw, Gerbig, Yvonne B. and Spiradek-Hahn, Krystina. (2008) Ceramic nitride/metal coatings with enhanced fracture toughness and fatigue resistance using a multiscalar laminate architecture. International Journal of Surface Science and Engineering, Vol.2 (No.6). pp. 419-438. ISSN 1749-785X

Sbano, L. and Southall, J.. (2010) Periodic solutions of the N-body problem with Lennard-Jones-type potentials. Dynamical Systems, Vol.25 (No.1). pp. 53-73. ISSN 1468-9367

Seiden, G. and Thomas, P. J. (Peter J.). (2011) Complexity, segregation, and pattern formation in rotating-drum flows. Reviews of Modern Physics, Vol.83 (No.4). pp. 1323-1365. ISSN 0034-6861

Shah, A.A., Brindley, J., McIntosh, A.C. and Rademacher, J.. (2008) The effects of heat exchange and fluid production on the ignition of a porous solid. Nonlinear Analysis: Real World Applications, Vol.9 (No.2). pp. 562-584. ISSN 1468-1218

Shire, G. S. F., Quarini, Giuseppe Leonardo and Evans, T. S.. (2009) Pressure drop of flowing ice slurries in industrial heat exchangers. Applied Thermal Engineering, Vol.29 (No.8-9). pp. 1500-1506. ISSN 1359-4311

Shire, G. S. F., Quarini, Giuseppe Leonardo, Rhys, T. D. L. and Evans, T. S.. (2008) The anomalous pressure drop behaviour of ice slurries flowing through constrictions. International Journal of Multiphase Flow, Vol.34 (No.5). pp. 510-515. ISSN 0301-9322

Shire, G. S. F., Tamainot-Telto, Zacharie, Critoph, Robert E., Metcalf, Steven John, Carruthers, J. D. and Sweeney, J. B. (2010) Design and test of a 4m3 solar refrigerator. In: EuroSun 2010 - International Conference on Solar Heating, Cooling and Buildings, Graz, Austria, Sep 28 - Oct 1, 2010

Singh, H., Muetze, Annette and Eames, P. C.. (2010) Factors influencing the uptake of heat pump technology by the UK domestic sector. Renewable Energy, Vol.35 (No.4). pp. 873-878. ISSN 0960-1481

Skeen, Andrew, 1980- (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.

Smith, S. T. (Stuart T.), 1961- (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.

Stewart, Ian and Parker , Martyn. (2008) Periodic dynamics of coupled cell networks II : cyclic symmetry. Dynamical Systems, Vol.23 (No.1). pp. 17-41. ISSN 1468-9367

Stewart, Ian, 1945- and Parker, Martyn. (2007) Periodic dynamics of coupled cell networks I: rigid patterns of synchrony and phase relations. Dynamical Systems: An international journal, Vol.22 (No.4). pp. 389-450. ISSN 1468-9367

Stovin, V. R., Guymer, Ian and Lau, Shing-Tak Douglas. (2010) Dimensionless method to characterize the mixing effects of surcharged manholes. Journal of Hydraulic Engineering (Reston), Vol.136 (No.5). pp. 318-327. ISSN 0733-9429

Sullivan, T., Koslowski, M., Theil, Florian and Ortiz, M.. (2009) On the behavior of dissipative systems in contact with a heat bath : application to Andrade creep. Journal of the Mechanics and Physics of Solids, Vol.57 (No.7). pp. 1058-1077. ISSN 0022-5096

Sun, Hao, Wang, Jihong, Guo, Shen and Luo, Xing (2011) Study on a wind turbine in hybrid connection with a energy storage system. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. Lecture Notes in Electrical Engineering, Vol.90 . Dordrecht, Netherlands: Springer Science+Business Media B.V., pp. 39-52. ISBN 978-94-007-1191-4

Swan, I. R. (Ian R.), Bryant, A. T., Parker-Allotey, Nii-Adotei and Mawby, P. A. (Philip A.) (2009) 3-D thermal simulation of power module packaging. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, Sepbember 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 1185-1192.

T

Tamainot-Telto, Zacharie, Metcalf, Steven John and Critoph, Robert E. (2009) Novel sorption generator for heat pump and refrigeration applications. In: Heat Powered Cycles Conference 2009, Berlin, Germany, Sep 7-9, 2009

Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E., Zhong, Y. and Thorpe, Roger. (2009) Carbon-ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping. International Journal of Refrigeration, Vol.32 (No.6). pp. 1212-1229. ISSN 0140-7007

Tandy, Michael J., Winkvist, Stefan and Young, Ken (2010) Competing in the RoboCup Rescue Robot League. In: Robotics for Risky Interventions and Surveillance of the Environment (RISE), Sheffield Hallam University, Sheffield, England, 20-21 January 2010. Published in: Proceedings of Robotics for Risky Interventions and Surveillance of the Environment, Vol.2010

Tenchev, Rosen and Purnell, Phil (2007) Reply to comments to the paper "An application of a damage constitutive model to concrete at high temperature and prediction of spalling" by Rosen Tenchev and Phil Purnell [Int. J. Solids Struct. 42 (26) (2005) 6550-6565]. International Journal of Solids and Structures, Vol.44 (No.11-12). pp. 4238-4241. ISSN 0020-7683

Thomas, P. J. and Linden, P. F.. (2007) Rotating gravity currents: small-scale and large-scale laboratory experiments and a geostrophic model. Journal of Fluid Mechanics, Vol.578 . pp. 35-65. ISSN 0022-1120

Thomas, P. J. (Peter J.), Zoueshtiagh, F., Merlen, A. and Thomy, V. (2008) Micro ripples, sand ripples and their universal wavelength scaling. In: The 7th EUROMECH Fluid Mechanics Conference, University of Manchester, Manchester, U.K., Sep 14-18, 2008. Published in: EFMC7 Book of Abstracts p. 326.

Tian, Yanling, Liu, X., Zhang, D. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Dynamic modelling of the fidelity of random surface measurement by the stylus method. Wear, Vol.266 (No.5-6). pp. 555-559. ISSN 0043-1648

Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Design and forward kinematics of the compliant micro-manipulator with lever mechanisms. Precision Engineering, Vol.33 (No.4). pp. 466-475. ISSN 0141-6359

Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Effects of the heat source profiles on the thermal distribution for ultraprecision grinding. Precision Engineering, Vol.33 (No.4). pp. 447-458. ISSN 0141-6359

Tian, Yuan and Zhao, Chang-Ying (2009) Heat transfer analysis for phase change materials (PCMs). In: The 11th International Conference on Energy Storage (Effstock 2009), Stockholm, Sweden, Jul 14-17, 2009. Published in: Effstock Conference Proceedings 2009 (No.28).

Tian, Yuan and Zhao, Chang-Ying (2009) Numerical investigations of heat transfer in phase change materials using non-equilibrium model. In: The Eleventh UK National Heat Transfer Conference, London, UK , 6-8 September 2009. Published in: Proceedings of 11th UK National Heat Transfer Conference

Tian, Yuan and Zhao, Chang-Ying. (2013) A review of solar collectors and thermal energy storage in solar thermal applications. Applied Energy, Vol.104 . pp. 538-553. ISSN 0306-2619

Tian, Yuan, Zhao, Chang-Ying and Lapkin, Alexei (2012) Exergy optimisation for cascaded thermal storage. In: 12th International Conference on Energy Storage (InnoStock 2012), Lleida, Spain, 16-19 May 2012. Published in: Proceedings of the 12th International Conference on Energy Storage

Tucker, R. J. (Robert James), 1951-, Ward, J., Holmes, M., Chong, Z. S., Rhine, J. M. (Jeffrey Michael), 1947- and Jones, D.. (2008) Development and experimental testing of a porous ceramic wall to improve the thermal performance of steel billet reheating furnaces. Journal of the Energy Institute, Vol.81 (No.3). pp. 135-142. ISSN 1743-9671

V

Van de Velden, Manon, Baeyens, Jan, Brems, Anke, Janssens, Bart and Dewil, Raf. (2010) Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction. Renewable Energy, Vol.35 (No.1). pp. 232-242. ISSN 09601481

Vasdravellis, G., Uy, B. and Karavasilis, Theodore L. (2012) Experimental validation of steel post-tensioned connections with web hourglass pins. In: 7th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), Santiago, Chile, Jan 09-11, 2012. Published in: STESSA 2012: Proceedings of the 7th International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 94 pp. 677-683. (In Press)

Veselovskaya, J. V., Critoph, Robert E., Thorpe, Roger, Metcalf, S., Tokarev, M. M. and Aristov, Yu. I.. (2010) Novel ammonia sorbents "porous matrix modified by active salt" for adsorptive heat transformation : 3. Testing of "BaCl2/vermiculite" composite in a lab-scale adsorption chiller. Applied Thermal Engineering, Vol.30 (No.10). pp. 1188-1192. ISSN 1359-4311

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.) and Hollerbach, R. (2009) Effect of the sign of ro on the stability of Stewartson layers generated by a rotating disc. In: 62nd Annual Meeting of the APS Division of Fluid Dynamics , Minneapolis, MN, U.S.A., Nov 22-24, 2009. Published in: Bulletin of the American Physical Society, Vol.54 (No.19). p. 290.

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.), Hollerbach, R. and Kerr, Robert M. (2011) Taylor columns in deep water: testing the limits of the Taylor-Proudman theorem. In: 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, Nov 20-22, 2011. Published in: Bulletin of the American Physical Society, Vol.56 (No.18). pp. 140-141.

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.), Hollerbach, R. and Kerr, Robert M. (2010) A stereo-PIV study of the Taylor-Column generated by a rotating disk. In: 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, CA, U.S.A., Nov 21-23, 2010. Published in: Bulletin of the American Physical Society, Vol.55 (No.16). p. 348.

W

Walmsley, Nigel, 1958- (1986) The numerical representation of pump-turbine performance characteristics. PhD thesis, University of Warwick.

Walters, Peter, 1943-. (2003) Erratum : A necessary and sufficient condition for a two-sided continuous function to be cohomologous to a one-sided continuous function (vol 18, pg 131, 2003). Dynamical Systems, Vol.18 (No.3). pp. 271-278. ISSN 1468-9367

Walters, Peter, 1943-. (2003) A necessary and sufficient condition for a two-sided continuous function to be cohomologous to a one-sided continuous function. Dynamical Systems, Vol.18 (No.2). pp. 131-138. ISSN 1468-9367

Wang, J., Eames, P. C., Zhao, J. F., Hyde, T. and Fang, Y.. (2007) Stresses in vacuum glazing fabricated at low temperature. Solar Energy Materials and Solar Cells, Vol.91 (No.4). pp. 290-303. ISSN 0927-0248

Wang, Jihong, Luo, Xing, Yang, Li, Shpanin, Leonid M., Jia, Nan, Mangan, Stephen and Derby, James W.. (2011) Mathematical modeling study of scroll air motors and energy efficiency analysis - part II. IEEE/ASME Transactions on Mechatronics, Vol.16 (No.1). pp. 122-132. ISSN 1083-4435

Wang, Jihong, Yang, Li, Luo, Xing, Mangan, Stephen and Derby, James W.. (2011) Mathematical modeling study of scroll air motors and energy efficiency analysis - part I. IEEE/ASME Transactions on Mechatronics, Vol.16 (No.1). pp. 112-121. ISSN 1083-4435

Wang, L. W., Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E. and Wang, R. Z.. (2010) Anisotropic thermal conductivity and permeability of compacted expanded natural graphite. Applied Thermal Engineering, Vol.30 (No.13). pp. 1805-1811. ISSN 1359-4311

Wang, Y. D., McIlveen-Wright, D., Huang, Y., Hewitt, N., Eames, P. C., Rezvani, S., McMullan, J. and Roskilly, A. P.. (2007) The application of FLOX/COSTAIR technologies to reduce NOx emissions from coal/biomass fired power plant: a technical assessment based on computational simulation. Fuel, Vol.86 (No.14). pp. 2101-2108. ISSN 0016-2361

Wang, Youyu, Liu, Haitao, Huang, Tian and Chetwynd, Derek G.. (2009) Stiffness modeling of the Tricept robot using the overall Jacobian matrix. Journal of Mechanisms and Robotics, Vol.1 (No.2). 021002. ISSN 19424302

Weager, Brendon M., Bishop, G. R., Black, A. C., Reynolds, N., Pharaoh, M. W., Smith, G. F., Rowe, J., Riley, D. E., Birrell, M. and Donaldson, P.. (2007) Development of recyclable self-reinforced polypropylene parts for automotive applications. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 44 (3-4). pp. 293-310. ISSN 0143-3369

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. ISSN 0950-3293

Wen, Huii-I, Zhang, Shu-jun, Hapeshi, Kevin and Wang, Xiao-feng. (2008) An innovative methodology of product design from nature. Journal of Bionic Engineering, Vol.5 (No.1). pp. 75-84. ISSN 1672-6529

Whittle, J. K., Williams, M. S., Karavasilis, Theodore L. and Blakeborough, A. (Anthony). (2012) A comparison of viscous damper placement methods for improving seismic building design. Journal of Earthquake Engineering, Vol.16 (No.4). pp. 540-560. ISSN 1363-2469

Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.

Wong, I. L., Eames, P. C. and Perera, R. S. (2007) A review of transparent insulation systems and the evaluation of payback period for building applications. In: CISBAT International Conference on Solar Energy Applications to Buildings, Swiss Fed Inst Technol, Lausanne, SWITZERLAND, 2005. Published in: SOLAR ENERGY, 81 (9 Sp. Iss. SI). pp. 1058-1071.

Wood, Benjamin M., Coles, Stuart R., Kirwan, Kerry and Maggs, S. J.. (2010) Biocomposites : evaluating the potential compatibility of natural fibers and resins for new applications. Journal of Advanced Materials, Vol.42 (No.2). pp. 5-16. ISSN 1070-9789

Wood, D. A. (David A.) (2006) Making better springs using aspects of chaos theory. In: Conference on Bifurcations - The Use and Control of Chaos, University of Southampton, Southampton, England, July 28th - 30th, 2003. Published in: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.220 (No.3). pp. 253-259.

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.), Beaumont, R., Rusinek, A., Mayer, U. and Pearce, A. (2009) A method to calibrate a specimen with strain gauges to measure force over the full-force range in high rate testing. In: 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Royal Mil Acad, Brussels, Belgium, September 07-11, 2009. Published in: DYMAT 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading Volume 1, 1 pp. 265-273.

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.) and Rusinek, A.. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials & Design, Vol.32 (No.4). pp. 2246-2259. ISSN 0264-1275

Wu, C-Y, Fan, X. F., Motazedian, F., Seville, J. P. K. (Jonathan P. K.), Parker, D. J. and Cocks, A. C. F.. (2010) Quantitative investigation of powder flow during die filling using positron emission particle tracking. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol.224 (No.3). pp. 169-175. ISSN 0954-4089

Wu, Feng, Zhang, Xiao-Ping, Godfrey, Keith and Ju, Ping (2006) Modeling and control of wind turbine with doubly fed induction generator. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 1404-1409.

Wu, Yupeng, Eames, Philip, Smyth, Mervyn and Mallick, Tapas (2007) Optical and thermal analysis of different asymmetric compound parabolic photovoltaic concentrators (ACPPVC) systems for building integration. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, PEOPLES R CHINA, SEP 18-21, 2007. Published in: PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V pp. 1440-1444.

Wu, Z. G. and Zhao, Chang-Ying. (2011) Experimental investigations of porous materials in high temperature thermal energy storage systems. Solar Energy, Vol.85 (No.7). pp. 1371-1380. ISSN 0038-092X

X

Xue, B., Lu, Dawei and Bei, C. (1987) Compensatory control of cylindricity in ultra precision grinding. In: 6th International Conference on Production Engineering, Osaka, Japan, 1987 pp. 340-395. (Unpublished)

Y

Yang, Raymond H., Teo, Chek Sing, Buice, Eric S., Liu, Xianping, Wang, Weili and Smith, Stuart T. (2008) Control strategies for a dynamic positioning machine at nanometer level. In: 23rd ASPE Annual Meeting (American Society for Precision Engineering), Portland, Oregon, U.S.A., Oct 19-24, 2008. Published in: Proceedings of the 23rd ASPE Annual Meeting

Yang, Shaoyong, Bryant, Angus T., Mawby, P. A. (Philip A.), Xiang, Dawei, Ran, Li and Tavner, Peter (2009) An industry-based survey of reliability in power electronic converters. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, SEP 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 2612-2618.

Yiu, H. H. P. and Liu, Kuo-Kang (2010) Mechanical and magnetic stimulation on cells for bone regeneration. In: Öchsner, A. and Ahmed, W., (eds.) Biomechanics of Hard Tissues. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 193-207. ISBN 9783527324316

Yoshimoto, Takahiro, Vlaskamp, Jozef H. A., Brend, M. A., Thomas, P. J. (Peter J.), Murai, Yuichi and Takeda, Yasushi (2008) Twisted wake of a sphere in rotating fluid. In: 61st Annual Meeting of the APS Division of Fluid Dynamics, San Antonio, TX, U.S.A., Nov 23-25, 2008. Published in: Bulletin of the American Physical Society, Vol.53 (No.15). pp. 124-125.

Young, Ken (2007) Viewpoint. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 34 (5). p. 357. ISSN 0143-991X

Young, Ken and Thersley, I. (2006) UK robotic installations statistics for 2005. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 33 (6). pp. 418-421. ISSN 0143-991X

Yue, Zhaoyang, Liu, Xianping, Cai, Z. and Cai, P. (2008) A multi-function tribological probe microscope with a hot tip for thermal measurement. In: Fifth International Symposium on Instrumentation Science and Technology, Shenyang, China, Sep 15-18, 2008. Published in: Proceedings of the Fifth International Symposium on Instrumentation Science and Technology, Vol.7133 Article: 71334L.

Z

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Zhang, D., Chetwynd, D. G. (Derek G.), 1948-, Liu, X. and Tian, Yanling. (2006) Investigation of a 3-DOF micro-positioning table for surface grinding. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 48 (12). pp. 1401-1408. ISSN 0020-7403

Zhang, Guan H. and Zhao, Chang-Ying. (2011) Thermal and rheological properties of microencapsulated phase change materials. Renewable Energy, Vol.36 (No.11). pp. 2959-2966. ISSN 0960-1481

Zhang, Hu and Liu, Kuo-Kang. (2008) Optical tweezers for single cells. Journal of The Royal Society Interface, Vol.5 (No.24). pp. 671-690. ISSN 1742-5689

Zhang, X. -P., Rehtanz, C. and Song, Y.. (2006) A grid for tomorrow. POWER ENGINEER, 20 (5). pp. 22-27. ISSN 1479-8344

Zhang, X. -P., Yao, L., Chong, B., Sasse, C. and Godfrey, K. R. (2005) FACTS and HVDC technologies for the development of future power systems. In: International Conference on Future Power Systems, Amsterdam, NETHERLANDS, NOV 16-18, 2005. Published in: 2005 International Conference on Future Power Systems (FPS) pp. 109-114.

Zhang, Xiao-Ping (2006) Continuation power flow in distribution system analysis. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 613-617.

Zhang, Yuning and Li, Shengcai. (2010) Notes on radial oscillations of gas bubbles in liquids : thermal effects. The Journal of the Acoustical Society of America, Vol.128 (No.5). EL306-EL309 . ISSN 00014966

Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.

Zhao, Chang-Ying, Dai, L. N., Tang, G. H., Qu, Z. G. and Li, Z. Y.. (2010) Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM). International Journal of Heat and Fluid Flow, Vol.31 (No.5). pp. 925-934. ISSN 0142-727X

Zhao, Chang-Ying, Lu, Wei and Tassou, S. A. (2009) Flow boiling heat transfer in horizontal metal-foam tubes. Journal of Heat Transfer, Vol.131 (No.12). Article: 121002. ISSN 0022-1481

Zhao, Chang-Ying, Lu, Wei and Tian, Yuan. (2010) Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs). Solar Energy, Vol.84 (No.8). pp. 1402-1412. ISSN 0038-092X

Zhao, Chang-Ying, Tassou, S. A and Lu, T. J. (Tianjian). (2008) Analytical considerations of thermal radiation in cellular metal foams with open cells. International Journal of Heat and Mass Transfer, Vol.51 (No.3-4). pp. 929-940. ISSN 0017-9310

Zhao, Chang-Ying and Zhang, Guan H.. (2011) Review on microencapsulated phase change materials (MEPCMs) : fabrication, characterization and applications. Renewable and Sustainable Energy Reviews, Vol.15 (No.8). pp. 3813-3832. ISSN 13640321

Zhao, Jun Fu, Eames, Philip C., Hyde, Trevor J., Fang, Yueping and Wang, Jinlei (2007) A modified pump-out technique used for fabrication of low temperature metal sealed vacuum glazing. In: CISBAT International Conference on Solar Energy Applications to Buildings, Swiss Fed Inst Technol, Lausanne, SWITZERLAND, 2005. Published in: SOLAR ENERGY, 81 (9 Sp. Iss. SI). pp. 1072-1077.

Zhong, Y., Critoph, Robert E. and Thorpe, Roger. (2006) Evaluation of the performance of solid sorption refrigeration systems using carbon dioxide as refrigerant. Applied Thermal Engineering, Vol.26 (No.16). pp. 1807-1811. ISSN 1359-4311

Zhong, Y., Critoph, Robert E., Thorpe, Roger, Tamainot-Telto, Z. and Aristov, Yu. I.. (2007) Isothermal sorption characteristics of the BaCl2-NH3 pair in a vermiculite host matrix. Applied Thermal Engineering, Vol.27 (No.14-15). pp. 2455-2462. ISSN 1359-4311

Zhou, Dan and Zhao, Chang-Ying (2009) Solid/liquid phase change heat transfer in latent heat thermal energy storage. In: 3rd International Conference on Energy Sustainability, San Francisco, CA, U.S.A., JUL 19-23, 2009. Published in: ES2009: Proceedings of the ASME 3rd International Conference on Energy Sustainability, Vol.2 pp. 863-869.

Zoueshtiagh, F., Thomas, P. J. (Peter J.), Thomy, V. and Merlen, A.. (2008) Micrometric granular ripple patterns in a capillary tube. Physical Review Letters, Vol.100 (No.5). Article 054501. ISSN 0031-9007

Zuo , Zhi-gang, Li, Shengcai, Liu, Shu-hong, Li, Shuang and Chen, Hui. (2009) An attribution of cavitation resonance : volumetric oscillations of cloud. Journal of Hydrodynamics, Vol.21 (No.2). pp. 152-158. ISSN 1001-6058