UNSPECIFIED. (1988) 2 SIDES OF THE JIT COIN - JAPAN AND UK .1. JIT IN JAPAN. CME-CHARTERED MECHANICAL ENGINEER, 35 (4). pp. 29-31. ISSN 0306-9532

UNSPECIFIED. (1983) ABSOLUTE IONIC PARTIAL MOLAL HYDRATION VOLUMES IN WATER AT 298-K. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 48 (6). pp. 493-503. ISSN 0141-8637

UNSPECIFIED (1994) ADVANCES IN NON-CONTACT AND AIR-COUPLED TRANSDUCERS. In: 1994 IEEE Ultrasonics Symposium, CANNES, FRANCE, NOV 01-04, 1994. Published in: 1994 IEEE ULTRASONICS SYMPOSIUM PROCEEDINGS, VOLS 1-3 pp. 1245-1254.

UNSPECIFIED. (1986) AERODYNAMIC RESPONSE OF MAGLEV TRAIN MODELS TO A CROSSWIND GUST. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 22 (2-3). pp. 205-213. ISSN 0167-6105

UNSPECIFIED (1990) AIR INFILTRATION AND VENTILATION CENTERS GUIDE TO AIR EXCHANGE-RATE AND AIRTIGHTNESS MEASUREMENT TECHNIQUES. In: SYMP ON AIR CHANGE RATE AND AIRTIGHTNESS IN BUILDINGS, ATLANTA, GA, APR 16-17, 1989. Published in: AIR CHANGE RATE AND AIRTIGHTNESS IN BUILDINGS, 1067 pp. 295-303.

UNSPECIFIED (1994) AN AMMONIA CARBON SOLAR REFRIGERATOR FOR VACCINE COOLING. In: World Renewable Energy Congress - Climate Change, Energy and the Environment, READING, ENGLAND, SEP 11-16, 1994. Published in: RENEWABLE ENERGY, 5 (1-4). pp. 502-508.

UNSPECIFIED (1985) ANALYSIS OF FREQUENCY-DEPENDENT LOSS DATA IN AMORPHOUS-SILICON AND GERMANIUM. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 51 (1). L7-L12. ISSN 0141-8637

UNSPECIFIED (1992) THE APPLICATION OF PARTICLE IMAGE VELOCIMETRY (PIV) IN A SHORT-DURATION TRANSONIC ANNULAR TURBINE CASCADE. In: 36TH INTERNATIONAL CONGRESS AND EXPOSITION ON GAS TURBINE AND AEROENGINE, ORLANDO, FL, JUN 03-06, 1991. Published in: JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 114 (3). pp. 504-509.

UNSPECIFIED. (1988) THE APPLICATION OF THE EXTENDED PAIR APPROXIMATION TO HOPPING CONDUCTION IN RF SPUTTERED AMORPHOUS-SILICON. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 58 (2). pp. 153-169. ISSN 0141-8637

UNSPECIFIED. (1992) THE APPLICATION OF THE WIGNER DISTRIBUTION FUNCTION TO MACHINE-TOOL MONITORING. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 206 (4). pp. 249-264. ISSN 0954-4062

UNSPECIFIED. (1985) APPLICATIONS OF LINEAR-PROGRAMMING TO ENGINEERING METROLOGY. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 199 (2). pp. 93-100. ISSN 0954-4054

UNSPECIFIED. (1985) ASSESSMENT OF SURFACE FINISH PROFILES PRODUCED BY MULTI-PROCESS MANUFACTURE. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 199 (4). pp. 263-270. ISSN 0954-4054

UNSPECIFIED (1984) AN ASSESSMENT OF THE STRUCTURAL MODELS FOR AMORPHOUS SIO USING MAS NMR. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 50 (3). L13-L18. ISSN 0141-8637

UNSPECIFIED. (2004) Acoustic resonance in aeroengine intake ducts. JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 126 (3). pp. 432-441. ISSN 0889-504X

UNSPECIFIED. (1997) Adsorption refrigerator using monolithic carbon-ammonia pair. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 20 (2). pp. 146-155. ISSN 0140-7007

UNSPECIFIED. (2003) Advanced solid sorption air conditioning modules using monolithic carbon-ammonia pair. APPLIED THERMAL ENGINEERING, 23 (6). pp. 659-674. ISSN 1359-4311

UNSPECIFIED (2004) Advanced unified power flow controller model for power system steady state control. In: 2nd International Conference on Electric Utility Deregulation, Restructuring and Power Technologies, Hong Kong, PEOPLES R CHINA, APR 05-08, 2004. Published in: PROCEEDINGS OF THE 2004 IEEE INTERNATIONAL CONFERENCE ON ELECTRIC UTILITY DEREGULATION, RESTRUCTURING AND POWER TECHNOLOGIES, VOLS 1 AND 2 pp. 228-233.

UNSPECIFIED (2004) Advances in measurements of the melting transition in non-stoichiometric UO2. In: 15th Symposium on Thermophysical Properties, Univ Colorado, BOULDER, CO, JUN 22-27, 2003. Published in: INTERNATIONAL JOURNAL OF THERMOPHYSICS, 25 (2). pp. 533-545.

UNSPECIFIED. (2001) Agile control systems. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 215 (D2). pp. 189-195. ISSN 0954-4070

UNSPECIFIED. (2003) Analytical approach for optimal design of a type of spherical parallel manipulator using dexterous performance indices. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 217 (4). pp. 447-455. ISSN 0954-4062

UNSPECIFIED (1994) Applications of the air infiltration and ventilation centre's numerical database. In: 15th AIVC Conference on the Role of Ventilation, BUXTON, ENGLAND, SEP 27-30, 1994. Published in: 15TH AIVC CONFERENCE - THE ROLE OF VENTILATION, PROCEEDINGS VOL 2 pp. 553-561.

UNSPECIFIED (1997) Assessing 'road-friendliness': a review. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 211 (6). pp. 455-475. ISSN 0954-4070

UNSPECIFIED. (2004) Assessment of periodic flow assumption for unsteady heat mransfer in grooved channels. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 126 (6). pp. 1044-1047. ISSN 0022-1481

UNSPECIFIED. (1998) Asymptotic behaviour of the oscillatory exchange coupling across alloy spacers: a first-principles approach. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 78 (5-6). pp. 577-584. ISSN 0141-8637

UNSPECIFIED. (1997) Automated procedures for Boolean operations on finite element meshes. ENGINEERING COMPUTATIONS, 14 (6-7). 702-+. ISSN 0264-4401

UNSPECIFIED (1999) Automation heads for Lego Land. INDUSTRIAL ROBOT, 26 (5). pp. 327-328. ISSN 0143-991X

UNSPECIFIED (2004) Automotive industry still leads the way - but where is it going? INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 31 (3). pp. 244-245. ISSN 0143-991X

UNSPECIFIED (1998) Autotuning with multiharmonic perturbations - Part I nonparametric closed loop identification. In: UKACC International Conference on Control 98, UNIV WALES UNIV COLL SWANSEA, SWANSEA, WALES, SEP 01-04, 1998. Published in: UKACC INTERNATIONAL CONFERENCE ON CONTROL '98, VOLS I&II pp. 1344-1349.

UNSPECIFIED (1998) Autotuning with multiharmonic perturbations - Part II - Computational improvements and identification of arbitrary critical points. In: UKACC International Conference on Control 98, UNIV WALES UNIV COLL SWANSEA, SWANSEA, WALES, SEP 01-04, 1998. Published in: UKACC INTERNATIONAL CONFERENCE ON CONTROL '98, VOLS I&II pp. 1350-1355.

UNSPECIFIED. (1995) BOUNDARY-LAYER INSTABILITY OVER COMPLIANT WALLS - COMPARISON BETWEEN THEORY AND EXPERIMENT. PHYSICS OF FLUIDS, 7 (10). pp. 2355-2363. ISSN 1070-6631

UNSPECIFIED. (1996) Bounded solutions for non-autonomous parabolic equations. DYNAMICS AND STABILITY OF SYSTEMS, 11 (2). pp. 109-120. ISSN 0268-1110

UNSPECIFIED (1993) CERAMIC TOOL WEAR WHEN MACHINING AUSTEMPERED DUCTILE IRON. In: 9TH INTERNATIONAL CONF ON WEAR OF MATERIALS, SAN FRANCISCO, CA, APR 13-16, 1993. Published in: WEAR, 162 (Part A). pp. 22-33.

UNSPECIFIED. (1993) COUPLED NONLINEAR OSCILLATORS AND THE SYMMETRIES OF ANIMAL GAITS. JOURNAL OF NONLINEAR SCIENCE, 3 (3). pp. 349-392. ISSN 0938-8974

UNSPECIFIED (2002) Carbon-ammonia sorption systems - Revious experience, current projects and challenges for the future. In: International Sorption Heat Pump Conference (ISHPC 2002), SHANGHAI, PEOPLES R CHINA, SEP 24-27, 2002. Published in: PROCEEDINGS OF THE INTERNATIONAL SORPTION HEAT PUMP CONFERENCE pp. 10-18.

UNSPECIFIED. (2000) A Cartesian cut cell method for incompressible viscous flow. APPLIED MATHEMATICAL MODELLING, 24 (8-9). pp. 591-606. ISSN 0307-904X

UNSPECIFIED. (2006) Cavitation enhancement of silt erosion - An envisaged micro model. WEAR, 260 (9-10). pp. 1145-1150. ISSN 0043-1648

UNSPECIFIED. (2003) Cavitation erosion in waters having different surface tensions. WEAR, 254 (1-2). pp. 1-9. ISSN 0043-1648

UNSPECIFIED (2003) Characterisation of engineered surfaces by a novel four-in-one tribological probe microscope. In: 14th International Conference on Wear of Materials, WASHINGTON, D.C., MAR 30-APR 03, 2003. Published in: WEAR, 255 (Part 1). pp. 385-394.

UNSPECIFIED. (2003) Characterisation of the contact patch behaviour of an automobile tyre by physical testing. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 31 (3). pp. 354-376. ISSN 0143-3369

UNSPECIFIED (1998) Classification of materials for thermoelastic stress analysis ADVANCES IN DESIGN, TESTING AND ANALYSIS. In: 11th International Conference on Experimental Mechanics, UNIV OXFORD, OXFORD, ENGLAND, AUG 24-28, 1998. Published in: EXPERIMENTAL MECHANICS, VOLS 1 AND 2 pp. 475-480.

UNSPECIFIED. (1999) Collapsed 27 node Lagrangian element for three-dimensional stress intensity computations. THEORETICAL AND APPLIED FRACTURE MECHANICS, 32 (3). pp. 189-201. ISSN 0167-8442

UNSPECIFIED (1996) Comment on British Gas TransCo consultative document (November 1995). ENERGY POLICY, 24 (5). pp. 373-375. ISSN 0301-4215

UNSPECIFIED (2002) Comments on 'Fractal or fiction' by D.J. Whitehouse [Wear 249 (2001) 345-353] - Author's response to comments. WEAR, 252 (9-10). p. 843. ISSN 0043-1648

UNSPECIFIED. (1999) Comparison of steady state and transient methods for measurement of local heat transfer in plate fin-tube heat exchangers using liquid crystal thermography with radiant heating. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 42 (1). pp. 1-12. ISSN 0017-9310

UNSPECIFIED. (2003) Computation of an unsteady complex geometry flow using novel non-linear turbulence models. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 43 (9). pp. 979-1001. ISSN 0271-2091

UNSPECIFIED. (2001) Computation of particle and scalar transport for complex geometry turbulent flows. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 123 (2). pp. 372-381. ISSN 0098-2202

UNSPECIFIED. (2005) Conceptual design and dimensional synthesis for a 3-DOF module of the invariant - A novel 5-DOF reconfigurable hybrid robot. IEEE TRANSACTIONS ON ROBOTICS, 21 (3). pp. 449-456. ISSN 1552-3098

UNSPECIFIED. (2004) Conceptual design and dimensional synthesis of a novel 2-DOF translational parallel robot for pick-and-place operations. JOURNAL OF MECHANICAL DESIGN, 126 (3). pp. 449-455. ISSN 1050-0472

UNSPECIFIED. (2005) Conceptual design and dimensional synthesis of a reconfigurable hybrid robot. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 127 (3). pp. 647-653. ISSN 1087-1357

UNSPECIFIED (1997) Concurrent engineering in product introduction: some requirements for information management CONFERENCE THEME: SUSTAINABLE MANUFACTURING FOR GLOBAL BUSINESS. In: 1st International Conference on Managing Enterprises - Stakeholders, Engineering, Logistics, and Achievement (ME-SELA 97) - Sustainable Manufacturing for Global Business, LOUGHBOROUGH UNIV, LOUGHBOROUGH, ENGLAND, JUL 22-24, 1997. Published in: FIRST INTERNATIONAL CONFERENCE: MANAGING ENTERPRISES - STAKEHOLDERS, ENGINEERING, LOGISTICS, AND ACHIEVEMENT (ME-SELA'97) pp. 561-566.

UNSPECIFIED (1997) Conditioning of the manufacturing process using surface finish. In: 3rd International Conference on Laser Metrology and Machine Performance (LAMDAMAP 97), UNIV HUDDERSFIELD, HUDDERSFIELD, ENGLAND, 1997. Published in: LASER METROLOGY AND MACHINE PERFORMANCE III pp. 3-20.

UNSPECIFIED (2002) Constraint modelling using object-based kriging. In: Engineering Design Conference 2002, KINGS COLL, LONDON, ENGLAND, JUL 09-11, 2002. Published in: COMPUTER-BASED DESIGN pp. 589-596.

UNSPECIFIED. (1996) Contact resistance in air-cooled plate fin-tube air-conditioning condensers. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 19 (6). pp. 400-406. ISSN 0140-7007

UNSPECIFIED (1996) Critical components for fuel cell hybrid powertrains. In: Autotech 95, NATL EXHIBIT CTR, BIRMINGHAM, ENGLAND, NOV 07-09, 1995. Published in: AUTOMOTIVE POWERTRAINS, 96 (8). pp. 3-16.

UNSPECIFIED (1998) Current status of the use of wall compliance for laminar-flow control. In: Workshop on Flow Control - Fundamentals and Practices, CORSICA, FRANCE, JUL 01-05, 1996. Published in: EXPERIMENTAL THERMAL AND FLUID SCIENCE, 16 (1-2). pp. 133-140.

UNSPECIFIED. (1983) THE DC CONDUCTIVITY OF CHALCOGENIDE FILMS DUE TO THE CORRELATED BARRIER HOPPING MECHANISM. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 47 (4). pp. 437-443. ISSN 0141-8637

UNSPECIFIED (1994) DESIGN, SIMULATION AND TESTING OF A SERIES RESONANT CONVERTER FOR PULSED LOAD APPLICATIONS. In: 5th International Conference on Power Electronics and Variable-Speed Drives (PEVD94), INST ELECT ENGINEERS, LONDON, ENGLAND, OCT 26-28, 1994. Published in: FIFTH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND VARIABLE-SPEED DRIVES (399). pp. 256-261.

UNSPECIFIED (1992) DEVELOPMENT OF A TURBINE TO OPERATE IN THE VORTEX FIELD GENERATED BY A SLENDER DELTA WING. In: CONF AND EXHIBITION OF THE EUROPEAN WIND ENERGY ASSOC ( EWEC 91 ), AMSTERDAM, NETHERLANDS, OCT 14-18, 1991. Published in: JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 39 (1-3). pp. 417-425.

UNSPECIFIED. (1992) DIGITAL HOLOGRAPHIC-INTERFEROMETRY IN HIGH-SPEED FLOW RESEARCH. EXPERIMENTS IN FLUIDS, 13 (1). pp. 56-62. ISSN 0723-4864

UNSPECIFIED. (1986) DIRECTIONAL COMPTON PROFILE MEASUREMENTS OF ALUMINUM WITH 412 AND 60 KEV RADIATION. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 54 (1). pp. 37-49. ISSN 0141-8637

UNSPECIFIED. (1983) DIRECTIONAL COMPTON PROFILES AND THE ELECTRON-DENSITY DISTRIBUTION IN VANADIUM. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 47 (1). pp. 51-62. ISSN 0141-8637

UNSPECIFIED. (1982) DYNAMICS AND SYMMETRY - PREDICTIONS FOR MODULATED WAVES IN ROTATING FLUIDS. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 79 (1). pp. 1-37. ISSN 0003-9527

UNSPECIFIED. (1992) THE DYNAMICS OF N-WEAKLY COUPLED IDENTICAL OSCILLATORS. JOURNAL OF NONLINEAR SCIENCE, 2 (1). pp. 69-108. ISSN 0938-8974

UNSPECIFIED (2000) Design and stress analysis of an immersed tube. In: SEM 9th International Congress on Experimental Mechanics, ORLANDO, FL, JUN 05-08, 2000. Published in: PROCEEDINGS OF THE SEM IX INTERNATIONAL CONGRESS ON EXPERIMENTAL MECHANICS pp. 928-931.

UNSPECIFIED. (1997) Design of robotic facilities for agile automobile manufacturing. INDUSTRIAL ROBOT, 24 (1). 72-&. ISSN 0143-991X

UNSPECIFIED. (1999) Determination of closed form solution to the 2-D-orientation workspace of Gough-Stewart parallel manipulators. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 15 (6). pp. 1121-1125. ISSN 1042-296X

UNSPECIFIED. (1998) Determination of the temperature of a machined surface. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 120 (2). pp. 259-263. ISSN 1087-1357

UNSPECIFIED (1998) Development of an information model for concurrent engineering in product introduction DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 603-611.

UNSPECIFIED. (2005) Diameter and surcharge effects on solute transport across surcharged manholes. JOURNAL OF HYDRAULIC ENGINEERING-ASCE, 131 (4). pp. 312-321. ISSN 0733-9429

UNSPECIFIED. (2005) Dynamic formulation and performance comparison of the 3-DOF modules of two reconfigurable PKM - The tricept and the TriVariant. JOURNAL OF MECHANICAL DESIGN, 127 (6). pp. 1129-1136. ISSN 1050-0472

UNSPECIFIED. (1996) Dynamical characterization of the spatiotemporal structures in the wake of a bluff body. JOURNAL OF FLUIDS AND STRUCTURES, 10 (1). 21-&. ISSN 0889-9746

UNSPECIFIED. (1996) Dynamics and trackability of stylus systems. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 210 (2). pp. 159-165. ISSN 0954-4054

UNSPECIFIED. (2001) Dynamics of relative phases: Generalised multibreathers. NONLINEAR DYNAMICS, 25 (1-3). pp. 157-182. ISSN 0924-090X

UNSPECIFIED (1983) AN EASY TO MEASURE AVERAGE PEAK VALLEY PARAMETER FOR SURFACE FINISH. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 197 (SEP). pp. 205-207. ISSN 0954-4062

UNSPECIFIED. (1991) THE EFFECT OF HIGH-PRESSURE COOLANT SUPPLY WHEN MACHINING A HEAT-RESISTANT NICKEL-BASED SUPERALLOY. LUBRICATION ENGINEERING, 47 (9). pp. 751-757. ISSN 0024-7154

UNSPECIFIED. (1995) THE EFFECT OF SOLID-SURFACES ON TURBULENT JET NOISE. JOURNAL OF SOUND AND VIBRATION, 185 (3). pp. 397-413. ISSN 0022-460X

UNSPECIFIED (1984) THE EFFECT OF TEMPERATURE-DEPENDENT ENERGIES ON SEMICONDUCTOR THERMOPOWER FORMULAS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 50 (1). L5-L8. ISSN 0141-8637

UNSPECIFIED. (1990) THE EFFECTIVENESS OF ANTI-DOWNDRAFT DOMESTIC CHIMNEY POTS IN PREVENTING SMOKE BLOW-BACK. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 34 (2). pp. 147-168. ISSN 0167-6105

UNSPECIFIED. (1993) EVALUATION OF CERMET CUTTING TOOLS MATERIALS WHEN MACHINING G-17 CAST-IRON. LUBRICATION ENGINEERING, 49 (1). pp. 55-60. ISSN 0024-7154

UNSPECIFIED (2003) Early results from a systems approach to improving the performance and lifetime of lead acid batteries. In: 8th European Lead Battery Conference, ROME, ITALY, SEP 10-13, 2002. Published in: JOURNAL OF POWER SOURCES, 116 (1-2). pp. 110-117.

UNSPECIFIED. (1998) Effect of atomic short-range order on magnetic anisotropy. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 78 (5-6). pp. 611-615. ISSN 0141-8637

UNSPECIFIED (1997) Effect of humidity on the properties of stereolithography parts manufactured from SL5180 epoxy resin. In: 2nd National Conference on Developments in Rapid Prototyping and Tooling, BUCKINGHAMSHIRE COLL, HIGH WYCOMBE, ENGLAND, NOV 18-19, 1996. Published in: SECOND NATIONAL CONFERENCE ON DEVELOPMENTS IN RAPID PROTOTYPING AND TOOLING pp. 9-15.

UNSPECIFIED. (2003) Effect of laser pre-treatment on the machining performance of aluminum/SiC MMC. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 125 (4). pp. 378-384. ISSN 0094-4289

UNSPECIFIED. (2006) Effect of nanoscale topography and chemical composition of surfaces on their microfrictional behaviour. TRIBOLOGY LETTERS, 21 (2). pp. 161-168. ISSN 1023-8883

UNSPECIFIED (1996) Effect of wall compliance on rotating-disc boundary-layer stability. In: IUTAM Symposium on Nonlinear Instability and Transition in Three-Dimensional Boundary Layers, MANCHESTER, ENGLAND, JUL 17-20, 1995. Published in: IUTAM SYMPOSIUM ON NONLINEAR INSTABILITY AND TRANSITION IN THREE-DIMENSIONAL BOUNDARY LAYERS, 35 pp. 327-338.

UNSPECIFIED. (2006) Effectiveness through risk reduction: a comparison of the renewable obligation in England and Wales and the feed-in system in Germany. ENERGY POLICY, 34 (3). pp. 297-305. ISSN 0301-4215

UNSPECIFIED. (1999) Effects of granular additives on transition boundaries between flow states of rimming flows. PHYSICS OF FLUIDS, 11 (8). pp. 2020-2029. ISSN 1070-6631

UNSPECIFIED (1995) Efficient characterization of surface topography in cylinder bores. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 396-399.

UNSPECIFIED. (2005) Elastic analysis of internally pressurized thick-walled spherical pressure vessels of functionally graded materials. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 82 (5). pp. 347-354. ISSN 0308-0161

UNSPECIFIED. (2005) Elastic-plastic analysis of annular disks with nonlinear strain-hardening under external pressure. ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 85 (3). pp. 202-210. ISSN 0044-2267

UNSPECIFIED (1995) Electric cars - Third time lucky? In: 19th International Power Sources Symposium, BRIGHTON, ENGLAND, APR 24-26, 1995. Published in: POWER SOURCES 15, 15 pp. 1-10.

UNSPECIFIED (1998) Emulator technology in complex engineering environments - Keynote paper DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 67-76.

UNSPECIFIED. (1999) Emulator technology in engineering design. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 213 (3). pp. 305-309. ISSN 0954-4054

UNSPECIFIED. (1999) Energy distribution in modes in the wake of a finite-length cylinder before and after transition. JOURNAL OF FLUIDS AND STRUCTURES, 13 (1). pp. 143-152. ISSN 0889-9746

UNSPECIFIED (2000) The England and Wales non-fossil fuel obligation: History and lessons. ANNUAL REVIEW OF ENERGY AND THE ENVIRONMENT, 25 . pp. 285-312. ISSN 1056-3466

UNSPECIFIED. (2005) Enstrophy dissipation in freely evolving two-dimensional turbulence. PHYSICS OF FLUIDS, 17 (8). -. ISSN 1070-6631

UNSPECIFIED (2001) Equation of state of UO2. In: 14th Symposium on Thermophysical Properties, UNIV COLORADO, BOULDER, COLORADO, JUN 25-30, 2000. Published in: INTERNATIONAL JOURNAL OF THERMOPHYSICS, 22 (4). pp. 1253-1264.

UNSPECIFIED. (1996) Evaluation of alternative refrigerant-adsorbent pairs for refrigeration cycles. APPLIED THERMAL ENGINEERING, 16 (11). pp. 891-900. ISSN 1359-4311

UNSPECIFIED (2003) Excitation and evolution of waves on an inhomogeneous flexible wall in a mean flow. In: 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, NEW ORLEANS, LA, NOV, 2002. Published in: JOURNAL OF FLUIDS AND STRUCTURES, 18 (2). pp. 251-267.

UNSPECIFIED. (2006) Experimental verification of Type-II-eigenmode destabilization in the boundary layer over a compliant rotating disk. PHYSICS OF FLUIDS, 18 (5). -. ISSN 1070-6631

UNSPECIFIED. (1994) FORCED-CONVECTION ENHANCEMENT OF ADSORPTION CYCLES. HEAT RECOVERY SYSTEMS & CHP, 14 (4). pp. 343-350. ISSN 0890-4332

UNSPECIFIED. (1992) FRICTIONAL FORCES BETWEEN A DIAMOND STYLUS AND SPECIMENS AT LOW LOAD. WEAR, 157 (2). pp. 279-294. ISSN 0043-1648

UNSPECIFIED. (1999) Fast optimization of mechanical designs using computer aided design computer aided engineering emulation: a case study. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 213 (D1). pp. 27-35. ISSN 0954-4070

UNSPECIFIED (1999) Fast-cycle adsorption refrigerator. In: Seminar on Recent Developments in Refrigeration and Heat Pump Technologies, IMECHE HEADQUARTERS, LONDON, ENGLAND, APR 20, 1999. Published in: RECENT DEVELOPMENTS IN REFRIGERATION AND HEAT PUMP TECHNOLOGIES, 1999 (10). pp. 79-91.

UNSPECIFIED. (2001) Fine structure of granular banding in two-phase rimming flow. PHYSICS OF FLUIDS, 13 (9). pp. 2720-2723. ISSN 1070-6631

UNSPECIFIED. (2004) Finite element simulation of a rolling automobile tyre to understand its transient macroscopic behaviour. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 218 (D12). pp. 1393-1408. ISSN 0954-4070

UNSPECIFIED. (1999) Forced convection adsorption cycle with packed bed heat regeneration. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 22 (1). pp. 38-46. ISSN 0140-7007

UNSPECIFIED (1998) Forced convection adsorption cycles. In: 1997 International Heat Powered Cycles Conference, NOTTINGHAM, ENGLAND, SEP 15-17, 1997. Published in: APPLIED THERMAL ENGINEERING, 18 (9-10). pp. 799-807.

UNSPECIFIED. (2006) Forward position analysis of the 3-DOF module of the TriVariant: A 5-DOF reconfigurable hybrid robot. JOURNAL OF MECHANICAL DESIGN, 128 (1). pp. 319-322. ISSN 1050-0472

UNSPECIFIED. (2001) Fractal or fiction. WEAR, 249 (5-6). pp. 345-353. ISSN 0043-1648

UNSPECIFIED (2001) Function maps and the role of surfaces. In: 8th International Conference on Metrology and Properties of Engineering Surfaces, HUDDERSFIELD, ENGLAND, APR 26-29, 2000. Published in: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 41 (13-14). pp. 1847-1861.

UNSPECIFIED. (2000) Fuzzy modelling approach to the prediction of journey parameters for hybrid electric vehicle control. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 214 (D8). pp. 875-885. ISSN 0954-4070

UNSPECIFIED. (1995) GENETIC SEARCH METHODS FOR ASSESSING GEOMETRIC TOLERANCES. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 122 (1-2). pp. 193-204. ISSN 0045-7825

UNSPECIFIED (1994) A GEOMETRIC HAMILTONIAN APPROACH TO THE AFFINE RIGID-BODY NEW TRENDS AND NEW TOOLS. In: NATO Advanced Research Workshop on Dynamics, Bifurcation and Symmetry: New Trends and New Tools, CARGESE, FRANCE, SEP 03-09, 1993. Published in: DYNAMICS, BIFURCATION AND SYMMETRY, 437 pp. 291-299.

UNSPECIFIED. (2003) Global behaviour corresponding to the absolute instability of the rotating-disc boundary layer. JOURNAL OF FLUID MECHANICS, 486 . pp. 287-329. ISSN 0022-1120

UNSPECIFIED. (1983) THE HALL-MOBILITY OF CARRIERS HOPPING IN AN IMPURITY BAND .3. NUMERICAL RESULTS AND ANALYSIS FOR ENERGY-DEPENDENT AND ENERGY-INDEPENDENT MODELS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 48 (6). pp. 551-560. ISSN 0141-8637

UNSPECIFIED. (1994) HAMILTONIAN SPATIAL STRUCTURE FOR 3-DIMENSIONAL WATER-WAVES IN A MOVING FRAME OF REFERENCE. JOURNAL OF NONLINEAR SCIENCE, 4 (3). pp. 221-251. ISSN 0938-8974

UNSPECIFIED. (1995) HEAT-TRANSFER IN GRANULAR ACTIVATED CARBON BEDS IN THE PRESENCE OF ADSORBABLE GASES. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 38 (9). pp. 1577-1585. ISSN 0017-9310

UNSPECIFIED. (1992) HELLEMAN ON DYNAMICS DAYS. NONLINEAR SCIENCE TODAY, 2 (2). pp. 18-19. ISSN 0938-9008

UNSPECIFIED (1984) A HISTORY OF THE DOWTY MARSHALLING YARD WAGON CONTROL-SYSTEM - DISCUSSION. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 198 (10). p. 207. ISSN 0954-4054

UNSPECIFIED. (1985) HOPF-BIFURCATION IN THE PRESENCE OF SYMMETRY. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 87 (2). pp. 107-165. ISSN 0003-9527

UNSPECIFIED. (1995) HOPPING CONDUCTION AND POSSIBLE COULOMB GAP EFFECTS IN MANGANESE AND ZINC FERROUS FERRITE. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 71 (1). pp. 23-39. ISSN 0141-8637

UNSPECIFIED. (1993) THE HYDROELASTIC STABILITY OF 3-DIMENSIONAL DISTURBANCES OF A FINITE COMPLIANT WALL. JOURNAL OF SOUND AND VIBRATION, 165 (3). pp. 527-552. ISSN 0022-460X

UNSPECIFIED. (2000) Heteroclinic cycles and wreath product symmetries. DYNAMICS AND STABILITY OF SYSTEMS, 15 (4). pp. 353-385. ISSN 0268-1110

UNSPECIFIED. (1996) Hidden symmetries and pattern formation in Lapwood convection. DYNAMICS AND STABILITY OF SYSTEMS, 11 (3). pp. 155-192. ISSN 0268-1110

UNSPECIFIED (1996) High resolution image reconstruction of polymer composite materials using neural networks. In: 22nd Symposium on Quantitative Nondestructive Evaluation, SEATTLE, WA, JUL 30-AUG 04, 1995. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 15 (Part A&B). pp. 853-860.

UNSPECIFIED. (1999) Hopf bifurcation on a simple cubic lattice. DYNAMICS AND STABILITY OF SYSTEMS, 14 (1). pp. 3-55. ISSN 0268-1110

UNSPECIFIED. (1998) Hopf bifurcations in three coupled oscillators with internal Z(2) symmetries. DYNAMICS AND STABILITY OF SYSTEMS, 13 (1). pp. 55-93. ISSN 0268-1110

UNSPECIFIED. (2006) Hydromagnetic surface waves on a tangential discontinuity. GEOPHYSICAL AND ASTROPHYSICAL FLUID DYNAMICS, 100 (1). pp. 59-83. ISSN 0309-1929

UNSPECIFIED. (1982) THE INFLUENCE OF THE NOMINAL CONTACT AREA PLANFORM ON FRICTION FORCE. WEAR, 83 (2). pp. 303-309. ISSN 0043-1648

UNSPECIFIED. (1995) INSTABILITY IN A SPATIALLY PERIODIC OPEN FLOW. PHYSICS OF FLUIDS, 7 (2). pp. 344-358. ISSN 1070-6631

UNSPECIFIED. (1993) AN INTEGRATED MBS MODELING ENVIRONMENT FOR VEHICLE MOTION CONTROL STUDIES. VEHICLE SYSTEM DYNAMICS, 22 (Suppl. S). pp. 112-115. ISSN 0042-3114

UNSPECIFIED. (1999) Identification of two functionally different classes of maxima in random surface waveforms. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 213 (3). pp. 303-306. ISSN 0954-4062

UNSPECIFIED (1997) Impact damage sustained during vehicle rollover THEORY, PRACTICE, EDUCATION. In: Symposium on Trends in Structural Mechanics - Theory, Practice, Education, UNIV WATERLOO, WATERLOO, CANADA, JUL 10-12, 1997. Published in: TRENDS IN STRUCTURAL MECHANICS, 54 pp. 175-184.

UNSPECIFIED (2003) Improving the business performance of an SME in the UK through strategic quality management. In: 1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR), UNIV STRATHCLYDE, GLASGOW, SCOTLAND, SEP 09-11, 2003. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XVII pp. 493-497.

UNSPECIFIED. (2000) Incorporated tool selection system using object technology. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 40 (11). pp. 1547-1555. ISSN 0890-6955

UNSPECIFIED. (1997) Indirect methods for assessing road friendliness of lorry suspensions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 211 (4). pp. 243-256. ISSN 0954-4070

UNSPECIFIED. (1999) Infinite-dimensional linear dynamical systems with chaoticity. JOURNAL OF NONLINEAR SCIENCE, 9 (2). pp. 197-211. ISSN 0938-8974

UNSPECIFIED. (1997) Instabilities in a plane channel flow between compliant walls. JOURNAL OF FLUID MECHANICS, 352 . pp. 205-243. ISSN 0022-1120

UNSPECIFIED. (1997) Integration of robots into intelligent control systems. INDUSTRIAL ROBOT, 24 (1). 58-&. ISSN 0143-991X

Hines, Evor, 1957- and Leeson, Mark S., 1963- and Martínez-Ramón, Manel, 1968- and Pardo, M. and Llobet, E. and Iliescu, Daciana and Yang , J., eds. (2008) Intelligent systems : techniques and applications. Maastricht: Shaker publishing. ISBN 9789042303454

UNSPECIFIED. (2004) Interior symmetry and local bifurcation in coupled cell networks. DYNAMICAL SYSTEMS-AN INTERNATIONAL JOURNAL, 19 (4). pp. 389-407. ISSN 1468-9367

UNSPECIFIED (2003) Interpreting photoelastic data obtained for a spherical containment vessel. In: Conference on Pressure Equipment Technology, UNIV STRATHCLYDE, GLASGOW, SCOTLAND, MAY 01-02, 2003. Published in: PRESSURE EQUIPMENT TECHNOLOGY: THEORY AND PRACTICE pp. 199-211.

UNSPECIFIED. (2003) Investigation of a resonance microgenerator. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 13 (2). pp. 209-216. ISSN 0960-1317

UNSPECIFIED (2006) Klebanoff modes in swept boundary layers. In: 6th IUTAM Symposium on Laminar-Turbulent Transition, Bangalore, INDIA, DEC 13-17, 2004. Published in: Sixth IUTAM Symposium on Laminar-Turbulent Transition, 78 pp. 167-172.

UNSPECIFIED (1984) LOW-FREQUENCY HOPPING CONDUCTIVITY IN AMORPHOUS-SEMICONDUCTORS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 49 (6). L65-L67. ISSN 0141-8637

UNSPECIFIED. (1992) LYAPUNOV EXPONENTS FOR ONE-DIMENSIONAL CELLULAR AUTOMATA. JOURNAL OF NONLINEAR SCIENCE, 2 (1). pp. 1-8. ISSN 0938-8974

UNSPECIFIED (2002) Laboratory demonstration of a multiple bed regenerative adsorption cycle air conditioner. In: International Sorption Heat Pump Conference (ISHPC 2002), SHANGHAI, PEOPLES R CHINA, SEP 24-27, 2002. Published in: PROCEEDINGS OF THE INTERNATIONAL SORPTION HEAT PUMP CONFERENCE pp. 571-575.

UNSPECIFIED. (2003) Laminar-turbulent boundary-layer transition over a rough rotating disk. PHYSICS OF FLUIDS, 15 (8). pp. 2441-2444. ISSN 1070-6631

UNSPECIFIED. (2003) Lean engineering in the aerospace industry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 217 (10). pp. 1409-1420. ISSN 0954-4054

UNSPECIFIED (1998) Linear and nonlinear stability analysis of perturbed plane Couette flow. In: 7th European Turbulence Conference (ETC7), ST JEAN CAP FERRAT, FRANCE, JUN 30-JUL 03, 1998. Published in: ADVANCES IN TURBULENCE VII, 46 pp. 123-126.

UNSPECIFIED. (2000) Linear instability mechanisms for sand wave formation. JOURNAL OF FLUID MECHANICS, 413 . pp. 219-246. ISSN 0022-1120

UNSPECIFIED (1997) Linking knowledge based engineering techniques to the finite element analysis of structures. In: 5th International Conference on Computer Aided Optimum Design of Structures (OPTI 97), ROME, ITALY, SEP 08-10, 1997. Published in: COMPUTER AIDED OPTIMUM DESIGN OF STRUCTURES V pp. 415-424.

UNSPECIFIED (1995) Load transfer in a hinge pin bracket secured by pretensioned bolts. In: 1995 SEM Spring Conference on Experimental Mechanics, GRAND RAPIDS, MI, JUN 12-14, 1995. Published in: PROCEEDINGS OF THE 1995 SEM SPRING CONFERENCE ON EXPERIMENTAL MECHANICS pp. 889-893.

UNSPECIFIED. (1997) Local slope analysis in the stylus-based assessment of surface integrity. TRIBOLOGY INTERNATIONAL, 30 (7). pp. 527-532. ISSN 0301-679X

UNSPECIFIED. (1998) Lubrication and application method in machining. INDUSTRIAL LUBRICATION AND TRIBOLOGY, 50 (4). 149-+. ISSN 0036-8792

UNSPECIFIED. (1982) MACHINED SURFACES - FINAL TEXTURE AND UNDERLYING STRUCTURE. WEAR, 83 (2). pp. 233-240. ISSN 0043-1648

UNSPECIFIED (1990) MACHINING OF TITANIUM AND ITS ALLOYS - A REVIEW. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 204 (1). pp. 53-60. ISSN 0954-4054

UNSPECIFIED (1990) MAGNETIC AND COMPOSITIONAL ORDER IN TRANSITION-METAL ALLOYS. In: WORKSHOP ON METASTABLE METALLIC PHASES : PRINCIPLES AND APPLICATIONS, IST ELETTROTECN NAZL, TURIN, ITALY, MAR 08-10, 1989. Published in: PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 61 (4). pp. 773-783.

UNSPECIFIED. (1992) MAGNETIC-FIELD-INDUCED METAL-INSULATOR-TRANSITION IN SI-B-DELTA LAYERS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 66 (3). pp. 379-389. ISSN 0141-8637

UNSPECIFIED. (1991) MANAGING TECHNOLOGICAL CHANGES - OPPORTUNITIES AND PITFALLS. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 12 (5-6). pp. 469-477. ISSN 0143-3369

UNSPECIFIED (1991) MAS NMR-STUDIES OF INORGANIC ELEMENTS IN COALS AND COMBUSTION RESIDUES. In: CONF ON COAL STRUCTURE AND REACTIVITY, CAMBRIDGE, ENGLAND, SEP 05-07, 1990. Published in: FUEL, 70 (3). pp. 361-366.

UNSPECIFIED (1994) MEASUREMENT OF FLUX LINKAGE IN THE HYBRID STEPPING MOTOR DRIVE. In: 5th International Conference on Power Electronics and Variable-Speed Drives (PEVD94), INST ELECT ENGINEERS, LONDON, ENGLAND, OCT 26-28, 1994. Published in: FIFTH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND VARIABLE-SPEED DRIVES (399). pp. 131-136.

UNSPECIFIED. (1987) THE MEASUREMENT OF WEAR DAMAGE. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 201 (4). pp. 251-258. ISSN 0954-4062

UNSPECIFIED. (1995) MODE INTERACTIONS WITH SYMMETRY. DYNAMICS AND STABILITY OF SYSTEMS, 10 (1). pp. 13-31. ISSN 0268-1110

UNSPECIFIED. (1994) MODE-LOCKING AND ROTATIONAL CHAOS IN NETWORKS OF OSCILLATORS - A MATHEMATICAL FRAMEWORK. JOURNAL OF NONLINEAR SCIENCE, 4 (3). pp. 301-314. ISSN 0938-8974

UNSPECIFIED (2000) Machining performance of PM material containing MnX additives. In: Symposium on Durability and Damage Tolerance of Composite Materials and Structures (DDTCMS) held at the IMECE/ASME Meeting, NASHVILLE, TENNESSEE, NOV 14-19, 1999. Published in: JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 122 (4). pp. 379-383.

UNSPECIFIED (1995) A Mathematica pre-processor for performance analysis of parallel systems PROCEEDINGS OF THE FIRST INTERNATIONAL MATHEMATICA SYMPOSIUM. In: 1st International Mathematica Symposium - Mathematics with Vision (IMS 95), SOUTHAMPTON, ENGLAND, JUL 16-20, 1995. Published in: MATHEMATICS WITH VISION pp. 283-290.

UNSPECIFIED (1995) Measurement of friction at light loads in polypyrrole thin film bearings. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 368-371.

UNSPECIFIED (1998) Measurement of trapped residuals in an SI engine through skip-firing THE EURO IV CHALLENGE. In: 1st International Seminar on the Euro IV Challenge - Future Technologies and Systems, INST MECH ENGINEERS HEADQUARTERS, LONDON, ENGLAND, DEC 03-04, 1997. Published in: FUTURE ENGINE AND SYSTEM TECHNOLOGIES, 1998 (5). pp. 223-233.

UNSPECIFIED. (1998) Measurements of tribological properties of poly(pyrrole) thin film bearings. TRIBOLOGY INTERNATIONAL, 31 (6). pp. 313-323. ISSN 0301-679X

UNSPECIFIED. (2004) Measures of performance for lean product introduction in the aerospace industry. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 218 (10). pp. 1387-1398. ISSN 0954-4054

UNSPECIFIED. (2001) Measuring the flow through a model engine inlet system containing a plenum and runners. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 215 (C8). pp. 955-964. ISSN 0954-4062

UNSPECIFIED (1997) Mechanical properties of silicate matrix SiC yarn reinforced composites. In: 9th International Conference in Fracture (ICF9), SYDNEY, AUSTRALIA, APR 01-05, 1997. Published in: ADVANCES IN FRACTURE RESEARCH, VOLS 1-6 pp. 1127-1134.

UNSPECIFIED. (2002) A Melnikov function for the break-up of closed streamlines in steady Navier-Stokes flows. PHYSICS OF FLUIDS, 14 (5). pp. 1572-1579. ISSN 1070-6631

UNSPECIFIED (2004) Microstructure and performance limits of ceramic matrix composites. In: 3rd Oxford-Kobe Materials Seminar, Kobe Inst, Kobe, JAPAN, SEP 19-22, 2000. Published in: METAL AND CERAMIC MATRIX COMPOSITES pp. 299-322.

UNSPECIFIED. (2005) Modeling flank wear of carbide tool insert in metal cutting. WEAR, 259 (Part 2 Sp. Iss. SI). pp. 1235-1240. ISSN 0043-1648

UNSPECIFIED. (2005) Modular regenerative adsorption cycles with fixed beds, applied to trigeneration. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 219 (E2). pp. 197-204. ISSN 0954-4089

UNSPECIFIED (1996) Momentum and heat transfer by forced convection in fixed beds of granular active carbon. In: Applications of Adsorption in Energy Transfer and Storage Symposium, at the American-Institute-of-Chemical-Engineers Annual Meeting, SAN FRANCISCO, CA, NOV 15, 1994. Published in: APPLIED THERMAL ENGINEERING, 16 (5). pp. 419-427.

UNSPECIFIED. (2001) Monolithic carbon for sorption refrigeration and heat pump applications. APPLIED THERMAL ENGINEERING, 21 (1). pp. 37-52. ISSN 1359-4311

UNSPECIFIED (2002) Multiple bed regenerative adsorption cycle using the monolithic carbon-ammonia pair. In: Heat Powered Cycles Conference (HPC01), METIERS, FRANCE, SEP 05-07, 2001. Published in: APPLIED THERMAL ENGINEERING, 22 (6). pp. 667-677.

UNSPECIFIED. (2005) Multiview camera-calibration framework for nonparametric distortions removal. IEEE TRANSACTIONS ON ROBOTICS, 21 (5). pp. 1004-1009. ISSN 1552-3098

UNSPECIFIED. (1989) NEW TECHNOLOGY, COMPETITION AND THE FIRM - A FRAMEWORK FOR RESEARCH. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 10 (4). pp. 453-469. ISSN 0143-3369

UNSPECIFIED (1986) NEWTONS AND PASCALS. CME-CHARTERED MECHANICAL ENGINEER, 33 (9). p. 9. ISSN 0306-9532

UNSPECIFIED. (1982) NMR-STUDY OF CHANGES IN BONDING AND THE METAL NON-METAL TRANSITION IN LIQUID CESIUM ANTIMONY ALLOYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 46 (6). pp. 595-606. ISSN 0141-8637

UNSPECIFIED. (1986) NMR-STUDY OF ELECTRON LOCALIZATION IN SOME ALKALI-ANTIMONY ALLOYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 53 (3). pp. 247-252. ISSN 0141-8637

UNSPECIFIED (1986) AN NMR-STUDY OF SILICON COORDINATION IN Y-SI-AL-O-N GLASSES. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 54 (2). L51-L56. ISSN 0141-8637

UNSPECIFIED. (1992) THE NONLINEAR STABILITY OF FLOWS OVER COMPLIANT WALLS. JOURNAL OF FLUID MECHANICS, 239 . pp. 657-670. ISSN 0022-1120

UNSPECIFIED. (1992) A NUMERICAL-SIMULATION OF THE INTERACTION OF A COMPLIANT WALL AND INVISCID FLOW. JOURNAL OF FLUID MECHANICS, 234 . pp. 121-146. ISSN 0022-1120

UNSPECIFIED. (2004) The Newtonian viscosity of concentrated stabilized dispersions: Comparisons with the hard sphere fluid. JOURNAL OF RHEOLOGY, 48 (1). pp. 223-248. ISSN 0148-6055

UNSPECIFIED (1996) Non-contact ultrasonic tomography imaging using air-coupled capacitance transducers. In: 22nd Symposium on Quantitative Nondestructive Evaluation, SEATTLE, WA, JUL 30-AUG 04, 1995. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 15 (Part A&B). pp. 1051-1058.

UNSPECIFIED. (2000) Non-local two-dimensional turbulence and Batchelor's regime for passive scalars. JOURNAL OF FLUID MECHANICS, 408 . pp. 301-321. ISSN 0022-1120

UNSPECIFIED (2000) Nonlinear RDT theory of near wall turbulence. In: 8th European Turbulence Conference, BARCELONA, SPAIN, JUN 27-30, 2000. Published in: ADVANCES IN TURBULENCE VIII pp. 629-632.

UNSPECIFIED. (2000) Nonlinear dynamics of sand banks and sand waves. JOURNAL OF FLUID MECHANICS, 415 . pp. 285-321. ISSN 0022-1120

UNSPECIFIED. (2001) Nonlocality and intermittency in three-dimensional turbulence. PHYSICS OF FLUIDS, 13 (7). pp. 1995-2012. ISSN 1070-6631

UNSPECIFIED (2002) Novel multigrid orientated solution adaptive time-step approaches. In: ICFD Conference on Numerical Methods for Fluid Dynamics, UNIV OXFORD, OXFORD, ENGLAND, MAR 26-29, 2001. Published in: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 40 (3-4). pp. 507-519.

UNSPECIFIED. (1997) Numerical simulation of the evolution of Tollmien-Schlichting waves over finite compliant panels. JOURNAL OF FLUID MECHANICS, 335 . pp. 361-392. ISSN 0022-1120

UNSPECIFIED. (2004) Numerical studies of heat transfer enhancements in laminar separated flows. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 25 (1). pp. 22-31. ISSN 0142-727X

UNSPECIFIED. (2002) Numerical study of momentum and heat transfer in unsteady impinging jets. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 23 (5). pp. 592-600. ISSN 0142-727X

UNSPECIFIED. (1991) ON STATIONARY DISTRIBUTIONS IN NONLINEAR STOCHASTIC DIFFERENTIAL-SYSTEMS. QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS, 44 (Part 4). pp. 571-579. ISSN 0033-5614

UNSPECIFIED (1993) ON THE DIFFERENCE BETWEEN THE HYDROELASTIC INSTABILITY OF INFINITE AND VERY LONG COMPLIANT PANELS. JOURNAL OF SOUND AND VIBRATION, 163 (1). pp. 176-181. ISSN 0022-460X

UNSPECIFIED (1990) ON THE ROLE OF THE ELECTRONIC-STRUCTURE IN ORDER-DISORDER TRANSFORMATION OF METALLIC ALLOYS. In: WORKSHOP ON METASTABLE METALLIC PHASES : PRINCIPLES AND APPLICATIONS, IST ELETTROTECN NAZL, TURIN, ITALY, MAR 08-10, 1989. Published in: PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 61 (4). pp. 785-795.

UNSPECIFIED. (1990) AN OPTIMIZED MAGNET-COIL FORCE ACTUATOR AND ITS APPLICATION TO PRECISION ELASTIC MECHANISMS. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 204 (4). pp. 243-253. ISSN 0954-4062

UNSPECIFIED (1994) OSCILLATOR NETWORKS WITH THE SYMMETRY OF THE UNIT QUATERNION GROUP NEW TRENDS AND NEW TOOLS. In: NATO Advanced Research Workshop on Dynamics, Bifurcation and Symmetry: New Trends and New Tools, CARGESE, FRANCE, SEP 03-09, 1993. Published in: DYNAMICS, BIFURCATION AND SYMMETRY, 437 pp. 35-48.

UNSPECIFIED (1996) On exponent of vortex number in 2D turbulence. In: 6th European Turbulence Conference, SWISS FED INST TECHNOL, LAUSANNE, SWITZERLAND, JUL 02-05, 1996. Published in: ADVANCES IN TURBULENCES VI, 36 pp. 277-278.

UNSPECIFIED. (1996) On structured perturbations for two classes of linear infinite-dimensional systems. DYNAMICS AND CONTROL, 6 (3). pp. 227-261. ISSN 0925-4668

UNSPECIFIED. (2001) On the beta-drift of an initially circular vortex patch. JOURNAL OF FLUID MECHANICS, 436 . pp. 107-129. ISSN 0022-1120

UNSPECIFIED. (2000) On the form of free energy and specific heat in coupled thermo-elasticity with isotropic damage. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 37 (34). pp. 4691-4713. ISSN 0020-7683

UNSPECIFIED. (1998) On the persistence of non-axisymmetric vortices in inviscid two-dimensional flows. JOURNAL OF FLUID MECHANICS, 371 . pp. 141-155. ISSN 0022-1120

UNSPECIFIED. (1998) On the stability of large-amplitude vortices in a continuously stratified fluid on the f-plane. JOURNAL OF FLUID MECHANICS, 355 . pp. 139-162. ISSN 0022-1120

UNSPECIFIED. (1998) On the transition from initial data to travelling waves in the Fisher-KPP equation. DYNAMICS AND STABILITY OF SYSTEMS, 13 (2). pp. 167-174. ISSN 0268-1110

UNSPECIFIED. (2004) Optimal kinematic design of 2-DOF parallel manipulators with well-shaped workspace bounded by a specified conditioning index. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 20 (3). pp. 538-543. ISSN 1042-296X

UNSPECIFIED. (2001) Orange peel: who cares? PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 215 (D12). pp. 1241-1244. ISSN 0954-4070

UNSPECIFIED. (1996) Oscillatory and chaotic wakes behind moving boundaries in reaction-diffusion systems. DYNAMICS AND STABILITY OF SYSTEMS, 11 (4). pp. 303-324. ISSN 0268-1110

UNSPECIFIED. (1982) THE PARAMETER RASH - IS THERE A CURE. WEAR, 83 (1). pp. 75-78. ISSN 0043-1648

UNSPECIFIED. (1988) PERFORMANCE LIMITATIONS OF ADSORPTION CYCLES FOR SOLAR COOLING. SOLAR ENERGY, 41 (1). pp. 21-31. ISSN 0038-092X

UNSPECIFIED. (1989) THE PERFORMANCE OF CERAMIC TOOL MATERIALS FOR THE MACHINING OF CAST-IRON. WEAR, 135 (1). pp. 147-159. ISSN 0043-1648

UNSPECIFIED. (1993) A PHILOSOPHY OF LINKING MANUFACTURE TO FUNCTION - AN EXAMPLE IN OPTICS. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 207 (1). pp. 31-42. ISSN 0954-4054

UNSPECIFIED (1993) PREMELTING TRANSITION IN URANIUM-DIOXIDE. INTERNATIONAL JOURNAL OF THERMOPHYSICS, 14 (3). pp. 609-612. ISSN 0195-928X

UNSPECIFIED. (1993) PREMELTING TRANSITION IN URANIUM-DIOXIDE. INTERNATIONAL JOURNAL OF THERMOPHYSICS, 14 (2). pp. 259-283. ISSN 0195-928X

UNSPECIFIED. (2003) Partial regularity of strong local minimizers in the multi-dimensional calculus of variations. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 170 (1). pp. 63-89. ISSN 0003-9527

UNSPECIFIED (1996) Performance estimation of convective thermal wave adsorption cycles. In: Applications of Adsorption in Energy Transfer and Storage Symposium, at the American-Institute-of-Chemical-Engineers Annual Meeting, SAN FRANCISCO, CA, NOV 15, 1994. Published in: APPLIED THERMAL ENGINEERING, 16 (5). pp. 429-437.

UNSPECIFIED. (1998) Planktonic communities and chaotic advection in dynamical models of Langmuir circulation. APPLIED SCIENTIFIC RESEARCH, 59 (2-3). pp. 141-158. ISSN 0003-6994

UNSPECIFIED. (2001) Predicting chaotic dispersion with Eulerian symmetry measures: Wavy Taylor-vortex flow. PHYSICS OF FLUIDS, 13 (9). pp. 2522-2528. ISSN 1070-6631

UNSPECIFIED. (2000) Prediction of turbulent oscillatory flows in complex systems. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 33 (6). pp. 869-895. ISSN 0271-2091

UNSPECIFIED. (1993) RECOMMENDATIONS FOR THE OPTIMUM DESIGN OF PULTRUDED FRAMEWORKS. MECHANICS OF COMPOSITE MATERIALS, 29 (5). pp. 503-508. ISSN 0191-5665

UNSPECIFIED. (1985) RESONANT RAMAN-SCATTERING WITH GAMMA-RAYS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 52 (4). pp. 899-908. ISSN 0141-8637

UNSPECIFIED. (1988) A REVISED PHILOSOPHY OF SURFACE MEASURING SYSTEMS. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 202 (3). pp. 169-185. ISSN 0954-4062

UNSPECIFIED. (1985) A RIGID PLASTIC METHOD FOR THE DETERMINATION OF COLLAPSE LOADS OF INFILLED PANELS WITH OPENINGS. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 20 (1). pp. 41-52. ISSN 0309-3247

UNSPECIFIED (1992) RISK ASSESSMENT FOR BCI TESTING. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 13 (3). pp. 295-300. ISSN 0143-3369

UNSPECIFIED (1995) Rapid EDM electrodes: Linking rapid prototyping to high volume production. In: 1st National Conference on Rapid Prototyping and Tooling Research, BUCKINGHAMSHIRE COLL, HIGH WYCOMBE, ENGLAND, NOV 06-07, 1995. Published in: FIRST NATIONAL CONFERENCE ON RAPID PROTOTYPING AND TOOLING RESEARCH pp. 211-220.

UNSPECIFIED. (1999) Rapid cycling solar/biomass powered adsorption refrigeration system. RENEWABLE ENERGY, 16 (1-4). pp. 673-678. ISSN 0960-1481

UNSPECIFIED (2001) Rapid progress in manufacturing. In: Conference of the Institute-of-Mechanical-Engineers, BIRMINGHAM, ENGLAND, OCT 20, 1999. Published in: PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 215 (4). pp. 441-452.

UNSPECIFIED. (2003) Rapid prototyping models and their quality evaluation using reverse engineering. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 217 (1). pp. 81-96. ISSN 0954-4062

UNSPECIFIED. (1999) Regulatory reform in the Spanish electricity industry: a missed opportunity for competition. ENERGY POLICY, 27 (7). pp. 387-399. ISSN 0301-4215

UNSPECIFIED. (1999) Relative equilibria of molecules. JOURNAL OF NONLINEAR SCIENCE, 9 (1). pp. 53-88. ISSN 0938-8974

UNSPECIFIED. (2004) Renewable energy policy in the UK 1990-2003. ENERGY POLICY, 32 (17). pp. 1935-1947. ISSN 0301-4215

UNSPECIFIED (2005) Review of trends in solid sorption refrigeration and heat pumping technology. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 219 (E3). pp. 285-300. ISSN 0954-4089

UNSPECIFIED (1994) SETS, LINES AND ADDING MACHINES NEW TRENDS AND NEW TOOLS. In: NATO Advanced Research Workshop on Dynamics, Bifurcation and Symmetry: New Trends and New Tools, CARGESE, FRANCE, SEP 03-09, 1993. Published in: DYNAMICS, BIFURCATION AND SYMMETRY, 437 pp. 59-68.

UNSPECIFIED. (1990) SI-29 DERIVATIZATION AND NUCLEAR-MAGNETIC-RESONANCE STUDY OF OXYGEN FUNCTIONALITY IN COALS AND COAL PRODUCTS. FUEL, 69 (3). pp. 297-304. ISSN 0016-2361

UNSPECIFIED (1992) SIGNAL FIDELITY AND TRACKING FORCE IN STYLUS PROFILOMETRY. In: 5TH INTERNATIONAL CONF ON METROLOGY AND PROPERTIES OF ENGINEERING SURFACES, LEICESTER, ENGLAND, APR 10-12, 1991. Published in: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 32 (1-2). pp. 239-245.

UNSPECIFIED. (1990) SOLID-STATE NUCLEAR-MAGNETIC-RESONANCE STUDIES OF PHOSPHORUS AND BORON IN COALS AND COMBUSTION RESIDUES. FUEL, 69 (4). pp. 421-428. ISSN 0016-2361

UNSPECIFIED. (1987) SOLID-STATE NUCLEAR-MAGNETIC-RESONANCE STUDIES OF SODIUM AND ALUMINUM IN COAL. FUEL, 66 (1). pp. 34-39. ISSN 0016-2361

UNSPECIFIED. (1995) SPANWISE MODULATION OF STREAMWISE ROLLS IN ROTATING CHANNEL FLOW. QUARTERLY JOURNAL OF MECHANICS AND APPLIED MATHEMATICS, 48 (Part 2). pp. 257-284. ISSN 0033-5614

UNSPECIFIED. (1994) STABILITY OF THE UNFOLDING OF THE PREDATOR-PREY MODEL. DYNAMICS AND STABILITY OF SYSTEMS, 9 (3). pp. 179-195. ISSN 0268-1110

UNSPECIFIED. (1995) STREAMLINE TOPOLOGY IN ECCENTRIC TAYLOR VORTEX FLOW. JOURNAL OF FLUID MECHANICS, 285 . pp. 215-247. ISSN 0022-1120

UNSPECIFIED (1990) A STUDY OF ALUMINUM, PHOSPHORUS AND BORON IN COALS AND COMBUSTION RESIDUES BY SOLID-STATE NUCLEAR-MAGNETIC-RESONANCE SPECTROSCOPY. In: 2ND INTERNATIONAL ROLDUC SYMP ON COAL SCIENCE : COAL CHARACTERISATION FOR CONVERSION PROCESSES 2, ROLDUC, NETHERLANDS, MAY 22-25, 1989. Published in: FUEL PROCESSING TECHNOLOGY, 24 pp. 375-382.

UNSPECIFIED. (1994) STUDY OF THE FERROELASTIC TRANSFORMATION IN ZIRCONIA BY NEUTRON-DIFFRACTION. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 69 (3). pp. 499-507. ISSN 0141-8637

UNSPECIFIED. (1994) THE STUDY OF TRANSONIC-FLOWS BY QUANTITATIVE HOLOGRAPHIC-INTERFEROMETRY. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 208 (G2). pp. 91-97. ISSN 0954-4100

UNSPECIFIED (1994) A SWITCHED RELUCTANCE DRIVE FOR MARINE PROPULSION. In: 5th International Conference on Power Electronics and Variable-Speed Drives (PEVD94), INST ELECT ENGINEERS, LONDON, ENGLAND, OCT 26-28, 1994. Published in: FIFTH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND VARIABLE-SPEED DRIVES (399). pp. 1-6.

UNSPECIFIED. (1994) SYMMETRY GROUPS OF ATTRACTORS. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 126 (1). pp. 59-78. ISSN 0003-9527

UNSPECIFIED. (2003) Safety criteria for aperiodically forced systems. DYNAMICAL SYSTEMS-AN INTERNATIONAL JOURNAL, 18 (2). pp. 107-129. ISSN 1468-9367

UNSPECIFIED. (2006) Sandpile behaviour in discrete water-wave turbulence. JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT . -. ISSN 1742-5468

UNSPECIFIED. (1996) Secondary instability in the wake of a circular cylinder. PHYSICS OF FLUIDS, 8 (6). pp. 1683-1685. ISSN 1070-6631

UNSPECIFIED. (2004) Shear modulus of standard pultruded fiber reinforced plastic material. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 8 (2). pp. 141-147. ISSN 1090-0268

UNSPECIFIED. (2001) Simulation of a continuous multiple-bed regenerative adsorption cycle. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 24 (5). pp. 428-437. ISSN 0140-7007

UNSPECIFIED. (2005) Single-slip elastoplastic microstructures. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 178 (1). pp. 125-148. ISSN 0003-9527

UNSPECIFIED (2001) Singular perturbation equations for 3-d excitable media. In: Annual Scientific Conference of the Society-for-Applied-Mathematics-and-Mechanics (GAMM 2000), UNIV GOTTINGEN, GOTTINGEN, GERMANY, APR 02-07, 2000. Published in: ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 81 (Suppl. 1). S81-S84.

UNSPECIFIED (1998) Solar energy for cooling and refrigeration A STRATEGY FOR SUSTAINABLE DEVELOPMENT. In: European Seminar on Renewable Energy - A Strategy for Sustainable Development, WARSAW, POLAND, NOV 17-19, 1997. Published in: RENEWABLE ENERGY pp. 47-57.

UNSPECIFIED. (1997) Solar sorption refrigerator. RENEWABLE ENERGY, 12 (4). pp. 409-417. ISSN 0960-1481

UNSPECIFIED. (1999) Solar sorption refrigerator using a CPC collector. RENEWABLE ENERGY, 16 (1-4). pp. 735-738. ISSN 0960-1481

UNSPECIFIED. (2004) Some curious phenomena in coupled cell networks. JOURNAL OF NONLINEAR SCIENCE, 14 (2). pp. 207-236. ISSN 0938-8974

UNSPECIFIED. (2001) Some theoretical aspects of structure functions, fractal parameters and related subjects. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 215 (J2). pp. 207-210. ISSN 1350-6501

UNSPECIFIED. (2003) Spatio-temporal symmetries in S-N- and S-N x Z(2)-equivariant systems. DYNAMICAL SYSTEMS-AN INTERNATIONAL JOURNAL, 18 (4). pp. 279-293. ISSN 1468-9367

UNSPECIFIED (2004) Special Edition: Energy policy for a sustainable future. ENERGY POLICY, 32 (17). pp. 1887-1889. ISSN 0301-4215

UNSPECIFIED. (2004) Specific cooling power intensification limits in ammonia-carbon adsorption refrigeration systems. APPLIED THERMAL ENGINEERING, 24 (5-6). pp. 661-678. ISSN 1359-4311

UNSPECIFIED. (1999) Spectral emissivity of ytterbium oxide-based materials for application as selective emitters in thermophotovoltaic devices. SOLAR ENERGY MATERIALS AND SOLAR CELLS, 59 (4). pp. 337-348. ISSN 0927-0248

UNSPECIFIED. (1999) Stability analysis of perturbed plane Couette flow. PHYSICS OF FLUIDS, 11 (5). pp. 1187-1195. ISSN 1070-6631

UNSPECIFIED. (1998) Steering of 4WD vehicles with independent wheel torque control. VEHICLE SYSTEM DYNAMICS, 29 (Suppl. S). pp. 205-218. ISSN 0042-3114

UNSPECIFIED. (2002) Stiffness estimation of a tripod-based parallel kinematic machine. IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 18 (1). pp. 50-58. ISSN 1042-296X

UNSPECIFIED. (2000) Stylus damage prevention index. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 214 (7). pp. 975-980. ISSN 0954-4062

UNSPECIFIED (2004) Surface integrity mapping by a novel multi-function tribological probe microscope. In: 11th World Congress in Mechanism and Machine Science, Tianjin, PEOPLES R CHINA, APR 01-04, 2004. Published in: ELEVENTH WORLD CONGRESS IN MECHANISM AND MACHINE SCIENCE, VOLS 1-5, PROCEEDINGS pp. 2357-2361.

UNSPECIFIED (1999) Surface measurement fidelity. In: 4th International Conference on Laser Metrology and Machine Performance, UNIV NORTHUMBRIA, NEWCASTLE, ENGLAND, JUL, 1999. Published in: LASER METROLOGY AND MACHINE PERFORMANCE IV pp. 267-276.

UNSPECIFIED. (2003) Surface modification of powder metallurgy components with a direct diode laser. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 125 (4). pp. 372-377. ISSN 0094-4289

UNSPECIFIED. (1995) Switched reluctance drives: A comparative evaluation. POWER ENGINEERING JOURNAL, 9 (6). pp. 257-266. ISSN 0950-3366

UNSPECIFIED (2002) Symmetry breaking and turbulence in perturbed plane Couette flow. In: 12th Taylor-Couette Workshop, EVANSTON, ILLINOIS, SEP 06-08, 2001. Published in: THEORETICAL AND COMPUTATIONAL FLUID DYNAMICS, 16 (1). pp. 91-97.

UNSPECIFIED. (1996) Symmetry methods in collisionless many-body problems. JOURNAL OF NONLINEAR SCIENCE, 6 (6). pp. 543-563. ISSN 0938-8974

UNSPECIFIED. (1999) Symmetry-breaking bifurcations of wreath product systems. JOURNAL OF NONLINEAR SCIENCE, 9 (6). pp. 671-695. ISSN 0938-8974

UNSPECIFIED (1993) TENSILE CREEP OF SINTERED SILICON-CARBIDE. In: 5th International Conference on Creep and Fracture of Engineering Materials and Structures, UNIV COLL SWANSEA, SWANSEA, UNITED KINGDOM, MAR 28-APR 02, 1993. Published in: CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES pp. 353-360.

UNSPECIFIED. (1994) TRANSPORT IN 3D VOLUME-PRESERVING FLOWS. JOURNAL OF NONLINEAR SCIENCE, 4 (4). pp. 329-354. ISSN 0938-8974

UNSPECIFIED. (1993) TRIBOLOGICAL PROPERTIES OF ELECTROACTIVE POLYMERIC THIN-FILM BEARINGS. WEAR, 169 (1). pp. 43-57. ISSN 0043-1648

UNSPECIFIED. (1987) THE TWO-DIMENSIONAL STABILITY OF PERIODIC AND SOLITARY WAVE-TRAINS ON A WATER-SURFACE OVER ARBITRARY DEPTH. PHYSICS OF FLUIDS, 30 (8). pp. 2330-2338. ISSN 1070-6631

UNSPECIFIED. (2000) Target patterns and spirals in planar reaction-diffusion systems. JOURNAL OF NONLINEAR SCIENCE, 10 (3). pp. 333-354. ISSN 0938-8974

UNSPECIFIED. (2002) Temporal behavior of flow in rotating cavities. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 41 (6-7). pp. 611-627. ISSN 1040-7782

UNSPECIFIED (2001) Temporal behaviour of flow in rotating cavities. In: 2nd International Symposium on Advances in Computational Heat Transfer, PALM COVE, AUSTRALIA, MAY 20-25, 2001. Published in: CHT'01: ADVANCES IN COMPUTATIONAL HEAT TRANSFER II, VOLS 1 AND 2, PROCEEDINGS pp. 655-662.

UNSPECIFIED. (1999) Thermodynamic based comparison of sorption systems for cooling and heat pumping. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 22 (1). pp. 5-17. ISSN 0140-7007

UNSPECIFIED. (2000) Thermophysical properties of monolithic carbon. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 43 (11). pp. 2053-2058. ISSN 0017-9310

UNSPECIFIED. (1996) Three-dimensional Floquet stability analysis of the wake of a circular cylinder. JOURNAL OF FLUID MECHANICS, 322 . pp. 215-241. ISSN 0022-1120

UNSPECIFIED. (2002) Three-dimensional instability in flow over a backward-facing step. JOURNAL OF FLUID MECHANICS, 473 . pp. 167-190. ISSN 0022-1120

UNSPECIFIED (2001) Three-dimensional vortex method for near-wall boundary-layer flow structure. In: 1st International Conference on Computational Fluid Dynamics (ICCFD), KYOTO INST TECHNOL, KYOTO, JAPAN, JUL 15-17, 2000. Published in: COMPUTATIONAL FLUID DYNAMICS 2000 pp. 589-594.

UNSPECIFIED (2000) Through-tool coolant drilling of aluminum/SiC metal matrix composite. In: Symposium on Durability and Damage Tolerance of Composite Materials and Structures (DDTCMS) held at the IMECE/ASME Meeting, NASHVILLE, TENNESSEE, NOV 14-19, 1999. Published in: JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 122 (4). pp. 384-388.

UNSPECIFIED. (2006) Tolerance design of a 2-DOF overconstrained translational parallel robot. IEEE TRANSACTIONS ON ROBOTICS, 22 (1). pp. 167-172. ISSN 1552-3098

UNSPECIFIED. (1998) Tool performance and chip control when machining Ti6Al4V and Inconel 901 using high pressure coolant supply. MACHINING SCIENCE AND TECHNOLOGY, 2 (1). pp. 1-12. ISSN 1091-0344

UNSPECIFIED (2001) Topology optimisation of reinforced concrete structures NEW FRONTIERS FOR THE NEW MILLENNIUM. In: 1st Asian-Pacific Congress on Computational Mechanics, SYDNEY, AUSTRALIA, NOV 20-23, 2001. Published in: COMPUTATIONAL MECHANICS, VOLS 1 AND 2, PROCEEDINGS pp. 1251-1256.

UNSPECIFIED (1996) Towards a one tonne per day solar ice maker. In: World Renewable Energy Congress - Renewable Energy, Energy Efficiency and the Environment, DENVER, CO, JUN 15-21, 1996. Published in: RENEWABLE ENERGY, 9 (1-4). pp. 626-631.

UNSPECIFIED (1999) Towards a system for business process design from re-usable library elements. In: 15th National Conference on Manufacturing Research, UNIV BATH, BATH, ENGLAND, SEP 06-08, 1999. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XIII pp. 383-387.

UNSPECIFIED (1999) Towards a template for new product introduction. In: 15th National Conference on Manufacturing Research, UNIV BATH, BATH, ENGLAND, SEP 06-08, 1999. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XIII pp. 369-373.

UNSPECIFIED (2005) Turbulent-laminar patterns in plane Couette flow. In: Symposium on Non-Uniqueness of Solutions to the Navier-Stokes Equations and Their Connection with Laminar-Transition, Bristol, ENGLAND, AUG 09-11, 2004. Published in: IUTAM Symposium on Laminar-Turbulent Transition and Finite Amplitude Solutions, 77 pp. 107-127.

UNSPECIFIED. (1995) UK CAR RECYCLING IN 2002 - LESS PLASTIC THAN EXPECTED. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 16 (2-3). pp. 170-178. ISSN 0143-3369

UNSPECIFIED (2003) UK renewable energy policy: a review. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 7 (1). pp. 65-82. ISSN 1364-0321

UNSPECIFIED (2001) UK robot installation statistics for 2000. INDUSTRIAL ROBOT, 28 (5). pp. 372-375. ISSN 0143-991X

UNSPECIFIED. (2005) UK robotic installations statistics for 2004. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 32 (6). pp. 444-448. ISSN 0143-991X

UNSPECIFIED. (1993) UNFOLDING THE TORUS - OSCILLATOR GEOMETRY FROM TIME DELAYS. JOURNAL OF NONLINEAR SCIENCE, 3 (4). pp. 459-475. ISSN 0938-8974

UNSPECIFIED. (1992) UNIFORMLY TRAVELING WATER-WAVES FROM A DYNAMIC-SYSTEMS VIEWPOINT - SOME INSIGHTS INTO BIFURCATIONS FROM STOKES FAMILY. JOURNAL OF FLUID MECHANICS, 241 . pp. 333-347. ISSN 0022-1120

UNSPECIFIED. (1985) UNIVERSAL LOW-FREQUENCY BEHAVIOR IN THE AC HOPPING CONDUCTIVITY OF DISORDERED-SYSTEMS. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 52 (1). pp. 9-22. ISSN 0141-8637

UNSPECIFIED. (2001) URANS computations for a complex internal isothermal flow. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 190 (22-23). pp. 2893-2907. ISSN 0045-7825

UNSPECIFIED. (1986) THE USE OF OPTICAL DIFFRACTION TECHNIQUES TO OBTAIN INFORMATION ABOUT SURFACE FINISH, TOOL SHAPE AND MACHINE-TOOL CONDITION. WEAR, 109 (1-4). pp. 259-266. ISSN 0043-1648

UNSPECIFIED. (1991) USING A SEGREGATED FINITE-ELEMENT SCHEME TO SOLVE THE INCOMPRESSIBLE NAVIER-STOKES EQUATIONS. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 12 (1). pp. 81-92. ISSN 0271-2091

UNSPECIFIED. (2002) Unsteady heat transfer analysis of an impinging jet. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 124 (6). pp. 1039-1048. ISSN 0022-1481

UNSPECIFIED. (2003) Unsteady laminar flow and convective heat transfer in a sharp 180 degrees bend. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 24 (1). pp. 67-76. ISSN 0142-727X

UNSPECIFIED (2005) Unsteady turbulent flow with sudden pressure gradient changes. In: 8th ICFD Conference on Numerical Methods for Fluid Dynamics, Oxford Univ Comp Lab, Oxford, ENGLAND, 2004. Published in: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 47 (8-9). pp. 925-930.

UNSPECIFIED. (2005) Upstream-radiated rotor-stator interaction noise in mean swirling flow. JOURNAL OF FLUID MECHANICS, 523 . pp. 219-250. ISSN 0022-1120

UNSPECIFIED (1996) Using parameter estimation to assess road damage. In: 14th IAVSD Symposium on the Dynamics of Vehicles on Roads and Tracks, UNIV MICHIGAN, ANN ARBOR, MI, AUG 21-25, 1995. Published in: VEHICLE SYSTEM DYNAMICS, 25 (Suppl. S). pp. 559-572.

UNSPECIFIED. (2000) Using singular systems analysis to characterise the flow in the wake of a model passenger vehicle. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 85 (1). pp. 1-30. ISSN 0167-6105

UNSPECIFIED (1997) Using statistics to save cost in automotive product development within the areas of electromagnetic immunity and pass-by noise. In: Autotech Congress - Automotive Electronics (Autotech 97), BIRMINGHAM, ENGLAND, NOV 04-06, 1997. Published in: AUTOMOTIVE ELECTRONICS - AUTOTECH'97, 97 (10). pp. 93-103.

UNSPECIFIED (1997) Validation of rapid prototyping material for rapid experimental stress analysis. In: 8th Solid Freeform Fabrication (SFF) Symposium, UNIV TEXAS, AUSTIN, TX, AUG 11-13, 1997. Published in: SOLID FREEFORM FABRICATION PROCEEDINGS, SEPTEMBER 1997 pp. 635-642.

UNSPECIFIED. (2002) Validity and failure of the Cauchy-Born hypothesis in a two-dimensional mass-spring lattice. JOURNAL OF NONLINEAR SCIENCE, 12 (5). pp. 445-478. ISSN 0938-8974

UNSPECIFIED. (2005) Velocity and scaling of collapsing Euler vortices. PHYSICS OF FLUIDS, 17 (7). -. ISSN 1070-6631

UNSPECIFIED. (2005) Vortex collapse and turbulence. FLUID DYNAMICS RESEARCH, 36 (4-6). pp. 249-260. ISSN 0169-5983

UNSPECIFIED (1986) WHY NOT A LADY. CME-CHARTERED MECHANICAL ENGINEER, 33 (12). p. 8. ISSN 0306-9532

UNSPECIFIED. (1999) WKB theory for rapid distortion of inhomogeneous turbulence. JOURNAL OF FLUID MECHANICS, 390 . pp. 325-348. ISSN 0022-1120

UNSPECIFIED (1996) Wall thickness measurements in hot steel pipe using non-contact ultrasound. In: 22nd Symposium on Quantitative Nondestructive Evaluation, SEATTLE, WA, JUL 30-AUG 04, 1995. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 15 (Part A&B). pp. 2281-2287.

UNSPECIFIED (2002) Wave propagation in flows across junctions between rigid and flexible walls. In: 5th International Symposium on Fluid-Structure Interaction, Aeroelasticity, Flow-Induced Vibration and Noise, NEW ORLEANS, LA, NOV, 2002. Published in: PROCEEDINGS OF THE 5TH INTERNATIONAL SYMPOSIUM ON FLUID STRUCTURE INTERACTION, AEROELASTICITY, FLOW INDUCED VIBRATION AND NOISE, PTS A AND B pp. 1077-1085.

UNSPECIFIED. (1995) Weak coupling of strongly nonlinear, weakly dissipative identical oscillators. DYNAMICS AND STABILITY OF SYSTEMS, 10 (3). pp. 203-218. ISSN 0268-1110

UNSPECIFIED. (2004) Welding of plastics with high power diode lasers. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 31 (1). pp. 30-33. ISSN 0143-991X

UNSPECIFIED. (1991) AN X-RAY ABSORPTION STUDY OF BARRIER-TYPE ANODIC FILMS FORMED ON ALUMINUM IN CHROMATE ELECTROLYTES. PHILOSOPHICAL MAGAZINE B-PHYSICS OF CONDENSED MATTER STATISTICAL MECHANICS ELECTRONIC OPTICAL AND MAGNETIC PROPERTIES, 63 (2). pp. 557-571. ISSN 0141-8637

UNSPECIFIED. (2004) Zonal k-1 based large eddy simulations. COMPUTERS & FLUIDS, 33 (2). pp. 267-287. ISSN 0045-7930

UNSPECIFIED (1995) The accurate internal measurement of 200 micron diameter holes automatically by use of three-dimensional image processing. In: 2nd International Conference and Exhibition on Laser Metrology and Machine Performance (LAMDAMAP 95), SOUTHAMPTON, ENGLAND, JUL 11, 1995. Published in: LASER METROLOGY AND MACHINE PERFORMANCE II pp. 75-81.

UNSPECIFIED. (1997) The aeroacoustics and aerodynamics of high-speed Coanda devices, Part 1: Conventional arrangement of exit nozzle and surface. JOURNAL OF SOUND AND VIBRATION, 208 (5). pp. 777-801. ISSN 0022-460X

UNSPECIFIED. (1997) The aeroacoustics and aerodynamics of high-speed Coanda devices, Part 2: Effects of modifications for flow control and noise reduction. JOURNAL OF SOUND AND VIBRATION, 208 (5). pp. 803-822. ISSN 0022-460X

UNSPECIFIED (1996) The application of PIV (particle image velocimetry) to transonic flow measurements: Extracting three-dimensional measurements. In: International Seminar on Optical Methods and Data Processing in Heat and Fluid Flow, LONDON, ENGLAND, APR 18-19, 1996. Published in: INTERNATIONAL SEMINAR ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1996 (3). pp. 169-178.

UNSPECIFIED. (2005) An application of a damage constitutive model to concrete at high temperature and prediction of spalling. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 42 (26). pp. 6550-6565. ISSN 0020-7683

UNSPECIFIED (1998) The application of particle image velocimetry (PIV) and flow visualization to the coolant flow through an automotive engine. In: International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, CITY UNIV LONDON, LONDON, ENGLAND, APR 16-17, 1998. Published in: INTERNATIONAL CONFERENCE ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1998 (2). pp. 343-350.

UNSPECIFIED. (1998) A bi-modal structure imposed on gravity driven boundary currents in rotating systems by effects of the bottom topography. EXPERIMENTS IN FLUIDS, 25 (5-6). pp. 388-391. ISSN 0723-4864

UNSPECIFIED (1996) The computer modelling of a condenser in a cooling water system. In: 7th International Conference on Pressure Surges and Fluid Transients in Pipelines and Open Channels, HARROGATE, ENGLAND, APR 16-18, 1996. Published in: 7TH INTERNATIONAL CONFERENCE ON PRESSURE SURGES AND FLUID TRANSIENTS IN PIPELINES AND OPEN CHANNELS (19). pp. 503-519.

UNSPECIFIED (1998) The detection of magnetic phase transitions in ER-TM by electromagnetic acoustic transducers. In: Annual Review of Progress in Quantitative Nondestructive Evaluation, SAN DIEGO, CA, JUL 27-AUG 01, 1997. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B pp. 1451-1456.

UNSPECIFIED. (2001) The determination of a highly elastic adhesive's material properties and their representation in finite element analysis. FINITE ELEMENTS IN ANALYSIS AND DESIGN, 37 (3). pp. 221-232. ISSN 0168-874X

UNSPECIFIED. (2001) A dynamic subfilter-scale model for plane parallel flows. PHYSICS OF FLUIDS, 13 (7). pp. 2045-2064. ISSN 1070-6631

UNSPECIFIED. (1998) The dynamics improvement of railway bogie vehicles by a re-configurable mechanism. VEHICLE SYSTEM DYNAMICS, 29 (Suppl. S). pp. 741-747. ISSN 0042-3114

UNSPECIFIED. (1997) The effect of extremely low lubricant volumes in machining. WEAR, 210 (1-2). pp. 76-82. ISSN 0043-1648

UNSPECIFIED. (2005) The effect of piston bowl temperature on diesel exhaust emissions. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 219 (D3). pp. 371-388. ISSN 0954-4070

UNSPECIFIED. (1997) The effect of wall compliance on inflexion point instability in boundary layers. PHYSICS OF FLUIDS, 9 (2). pp. 468-470. ISSN 1070-6631

UNSPECIFIED (1993) The excitation of a flexible panel in the presence of a fluid flow. In: 2nd International Conference on Fluid Mechanics (ICFM-II), BEIJING, PEOPLES R CHINA, JUL 07-10, 1993. Published in: PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON FLUID MECHANICS pp. 131-136.

UNSPECIFIED. (1999) An experimental study of boundary-layer transition over a rotating, compliant disk. PHYSICS OF FLUIDS, 11 (11). pp. 3340-3352. ISSN 1070-6631

UNSPECIFIED (1997) A feature based approach to press tool manufacturing. In: 2nd National Conference on Developments in Rapid Prototyping and Tooling, BUCKINGHAMSHIRE COLL, HIGH WYCOMBE, ENGLAND, NOV 18-19, 1996. Published in: SECOND NATIONAL CONFERENCE ON DEVELOPMENTS IN RAPID PROTOTYPING AND TOOLING pp. 53-63.

UNSPECIFIED. (2001) The flow through a plenum-runner system - a comparison of experiment and computation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 215 (C8). pp. 943-953. ISSN 0954-4062

UNSPECIFIED (1996) The gas turbine series hybrid vehicle - Low emissions mobility for the future? In: Autotech 95, NATL EXHIBIT CTR, BIRMINGHAM, ENGLAND, NOV 07-09, 1995. Published in: AUTOMOTIVE POWERTRAINS, 96 (8). pp. 25-32.

UNSPECIFIED. (2005) A general and novel approach for parameter identification of 6-DOF parallel kinematic machines. MECHANISM AND MACHINE THEORY, 40 (2). pp. 219-239. ISSN 0094-114X

UNSPECIFIED. (2000) The geometry of the phase diffusion equation. JOURNAL OF NONLINEAR SCIENCE, 10 (2). pp. 223-274. ISSN 0938-8974

UNSPECIFIED. (2006) A hierarchy of plate models derived from nonlinear elasticity by gamma-convergence. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 180 (2). pp. 183-236. ISSN 0003-9527

UNSPECIFIED (1997) A hysteresis-free wind pump. In: 18th British-Wind-Energy-Association Conference on Wind Energy Conversion, EXETER UNIV, EXETER, ENGLAND, SEP 25-27, 1996. Published in: WIND ENERGY CONVERSION 1996 pp. 75-80.

UNSPECIFIED (1996) The impact response of glass fibre reinforced composites: A comparison between finite element results and experimental data VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS. In: 54th Annual Technical Conference of the Society-of-Plastics-Engineers - Plastics: Racing into the Future (ANTEC 96), INDIANAPOLIS, IN, MAY 05-10, 1996. Published in: ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III, 42 pp. 2504-2509.

UNSPECIFIED (1998) The instantaneous determination of a transonic stator wake and turbulent burst in a low-speed boundary layer in air using particle image velocimetry (PIV). In: International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, CITY UNIV LONDON, LONDON, ENGLAND, APR 16-17, 1998. Published in: INTERNATIONAL CONFERENCE ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1998 (2). pp. 351-361.

UNSPECIFIED (1998) The integration of free-form design and manufacturing using free-form features DESIGN REUSE. In: Engineering Design Conference '98, BRUNEL UNIV, UXBRIDGE, ENGLAND, JUN 23-25, 1998. Published in: ENGINEERING DESIGN CONFERENCE '98 pp. 577-584.

UNSPECIFIED (1997) The manufacturing implications of telematics. In: Autotech Congress - Automotive Manufacturing (Autotech 97), BIRMINGHAM, ENGLAND, NOV 04-06, 1997. Published in: AUTOMOTIVE MANUFACTURING - AUTOTECH '97, 97 (9). pp. 31-37.

UNSPECIFIED (1998) The measurement of a free air jet using particle image velocimetry (PIV) and laser Doppler anemometry (LDA). In: International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, CITY UNIV LONDON, LONDON, ENGLAND, APR 16-17, 1998. Published in: INTERNATIONAL CONFERENCE ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1998 (2). pp. 321-329.

UNSPECIFIED. (2005) A method for estimating servomotor parameters of a parallel robot for rapid pick-and-place operations/. JOURNAL OF MECHANICAL DESIGN, 127 (4). pp. 596-601. ISSN 1050-0472

UNSPECIFIED. (2002) A model for preferential concentration. PHYSICS OF FLUIDS, 14 (12). pp. 4352-4361. ISSN 1070-6631

UNSPECIFIED. (2003) A moving-load model for disc-brake stability analysis. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 125 (1). pp. 53-58. ISSN 1048-9002

UNSPECIFIED. (2003) The multiconfiguration equations for atoms and molecules: Charge quantization and existence of solutions. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 169 (1). pp. 35-71. ISSN 0003-9527

UNSPECIFIED (1997) A new order for gas in Europe? ENERGY POLICY, 25 (10). p. 897. ISSN 0301-4215

UNSPECIFIED (1995) A new probe for friction measurements at very small scales. In: 10th Annual Meeting of the American-Society-for-Precision-Engineering, AUSTIN, TX, OCT 15-20, 1995. Published in: PROCEEDINGS OF THE TENTH ANNUAL MEETING - THE AMERICAN SOCIETY FOR PRECISION ENGINEERING pp. 350-353.

UNSPECIFIED (1998) A non-contact laser-EMAT system for crack and hole detection in metal plates. In: Annual Review of Progress in Quantitative Nondestructive Evaluation, SAN DIEGO, CA, JUL 27-AUG 01, 1997. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B pp. 1907-1914.

UNSPECIFIED. (1997) The nonlinear hydroelastic behaviour of flexible walls. JOURNAL OF FLUIDS AND STRUCTURES, 11 (7). pp. 717-744. ISSN 0889-9746

UNSPECIFIED (1998) A novel non-contact ultrasonic system for liquid level measurement in moving metallic containers. In: Annual Review of Progress in Quantitative Nondestructive Evaluation, SAN DIEGO, CA, JUL 27-AUG 01, 1997. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B pp. 1929-1935.

UNSPECIFIED. (1997) A numerical study of the influence of the Basset force on the statistics of LDV velocity data sampled in a flow region with a large spatial velocity gradient. EXPERIMENTS IN FLUIDS, 23 (1). pp. 48-53. ISSN 0723-4864

UNSPECIFIED (1998) The potential for wind generator manufacture in Ethiopia SWITCH ON TO WIND POWER. In: 20th British-Wind-Energy-Association Conference on Wind Energy 1998 - Switch on to Wind Power, CARDIFF UNIV WALES, CARDIFF, WALES, SEP 02-04, 1998. Published in: WIND ENERGY 1998 pp. 155-163.

UNSPECIFIED. (2002) A practical calibration process using partial information for a commercial Stewart platform. ROBOTICA, 20 (Part 3). pp. 315-322. ISSN 0263-5747

UNSPECIFIED. (2000) A prototype of a fast cycle adsorption refrigerator utilizing a novel carbon-aluminium laminate. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 214 (A5). pp. 439-448. ISSN 0957-6509

UNSPECIFIED (1996) The response of an air-coupled ultrasonic transducer for various backplates and apertures. In: 22nd Symposium on Quantitative Nondestructive Evaluation, SEATTLE, WA, JUL 30-AUG 04, 1995. Published in: REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 15A AND 15B, 15 (Part A&B). pp. 1043-1050.

UNSPECIFIED. (1999) The rheology and microstructure of concentrated, aggregated colloids. JOURNAL OF RHEOLOGY, 43 (3). pp. 673-700. ISSN 0148-6055

UNSPECIFIED (1995) A shaft-drive windpump for developing countries. In: 17th British-Wind-Energy-Association Conference - Wind Energy Conversion 1995, WARWICK, ENGLAND, JUL 19-21, 1995. Published in: WIND ENERGY CONVERSION 1995 pp. 143-148.

UNSPECIFIED (2005) A solar cooling system for greenhouse food production in hot climates. In: 1st Leobener Symposium Polymeric Solar Materials, Univ Leoben, Polymer Competence Ctr Leoben, Leoben, AUSTRIA, NOV 06-07, 2003. Published in: SOLAR ENERGY, 79 (6). pp. 661-668.

UNSPECIFIED. (1997) The stability of rotating-disc boundary-layer flow over a compliant wall .1. Type I and II instabilities. JOURNAL OF FLUID MECHANICS, 350 . pp. 231-259. ISSN 0022-1120

UNSPECIFIED. (1997) The stability of rotating-disc boundary-layer flow over a compliant wall .2. Absolute instability. JOURNAL OF FLUID MECHANICS, 350 . pp. 261-270. ISSN 0022-1120

UNSPECIFIED (2003) A study of Japanese 5-S practice in UK industry. In: 1st International Conference on Manufacturing Research (ICMR2003) Incorporating with the 19th National Conference on Manufacturing Research (NCMR), UNIV STRATHCLYDE, GLASGOW, SCOTLAND, SEP 09-11, 2003. Published in: ADVANCES IN MANUFACTURING TECHNOLOGY - XVII pp. 549-553.

UNSPECIFIED (1996) A study of local heat transfer coefficients in a plate fin-tube heat exchanger using a steady state liquid crystal technique. In: International Seminar on Optical Methods and Data Processing in Heat and Fluid Flow, LONDON, ENGLAND, APR 18-19, 1996. Published in: INTERNATIONAL SEMINAR ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1996 (3). pp. 39-46.

UNSPECIFIED (1998) A study of local heat transfer coefficients in plate fin-tube heat exchangers using the steady state and transient liquid crystal techniques. In: International Conference on Optical Methods and Data Processing in Heat and Fluid Flow, CITY UNIV LONDON, LONDON, ENGLAND, APR 16-17, 1998. Published in: INTERNATIONAL CONFERENCE ON OPTICAL METHODS AND DATA PROCESSING IN HEAT AND FLUID FLOW, 1998 (2). pp. 201-210.

UNSPECIFIED. (1997) A study of particle paths in non-axisymmetric Taylor-Couette flows. JOURNAL OF FLUID MECHANICS, 338 . pp. 341-362. ISSN 0022-1120

UNSPECIFIED (1998) The unstoppable versus the immovable - a personal view of the future facing gasoline direct injection in the face of Euro IV THE EURO IV CHALLENGE. In: 1st International Seminar on the Euro IV Challenge - Future Technologies and Systems, INST MECH ENGINEERS HEADQUARTERS, LONDON, ENGLAND, DEC 03-04, 1997. Published in: FUTURE ENGINE AND SYSTEM TECHNOLOGIES, 1998 (5). pp. 125-138.

UNSPECIFIED (1998) The use of ancient philosophies as global business management strategies under QFD methodology. In: 8th International Flexible Automation and Intelligent Manufacturing Conference, PORTLAND, OR, JUL 01-03, 1998. Published in: FLEXIBLE AUTOMATION AND INTELLIGENT MANUFACTURING, 1998 pp. 153-164.

UNSPECIFIED (1999) The use of computer simulation to investigate turbo-charging and super-charging. In: International Conference on Integrated Powertrain Systems for a Better Environment, BIRMINGHAM, ENGLAND, NOV 10-11, 1999. Published in: INTERNATIONAL CONFERENCE ON INTEGRATED POWERTRAIN SYSTEMS FOR A BETTER ENVIRONMENT, 1999 (9). pp. 173-184.

UNSPECIFIED (1999) The use of inductor alternators with electronic regulation for dc generation. In: 9TH International Conference on Electrical Machines and Drives (EMD 99), CANTERBURY CHRIST CHURCH COLL, CANTERBURY, ENGLAND, SEP 01-03, 1999. Published in: NINTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND DRIVES (468). pp. 381-385.

UNSPECIFIED. (2005) The use of permeable refractory linings for enhancement of the thermal performance of a high-temperature furnace. JOURNAL OF THE ENERGY INSTITUTE, 78 (1). pp. 11-17. ISSN 1743-9671

UNSPECIFIED. (2002) A variational formulation of rate-independent phase transformations using an extremum principle. ARCHIVE FOR RATIONAL MECHANICS AND ANALYSIS, 162 (2). pp. 137-177. ISSN 0003-9527

Abdullah, Abu, 1960- (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2010) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems Control Conference (DSCC 2009)/Bath/ASME Symposium on Fluid Power and Motion Control, Hollywood, CA, October 12-14, 2009. Published in: ASME 2009 Dynamic Systems and Control Conference, Vol.1 pp. 741-747.

Ali, Syed Z., Udrea, Florin, Milne, W. I. (William I.) and Gardner, J. W. (Julian W.), 1958-. (2008) Tungsten-based SOI microhotplates for smart gas sensors. IEEE Journal of Microelectromechanical Systems, Vol.17 (No.6). pp. 1408-1417. ISSN 1057-7157

Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.

Altoe, Gisele F., Freitas, Jair C. C., Cunha, Alfredo G., Emmerich, Francisco G. and Smith, Mark E.. (2009) Kinetics and C-13 NMR study of oxygen incorporation into PVC- and pitch-derived materials. Energy & Fuels, Vol.23 (No.3 Sp. Iss. SI). pp. 1373-1378. ISSN 0887-0624

Antory, David. (2007) Application of a data-driven monitoring technique to diagnose air leaks in an automotive diesel engine: ada case study. Mechanical Systems and Signal Processing, Vol.21 (No.2). pp. 795-808. ISSN 0888-3270

Apte, A., Jones, C. K. R. T. (Christopher K. R. T.), Stuart, A. M. and Voss, J. (2008) Data assimilation: Mathematical and statistical perspectives. In: 9th ICFD Conference on Numerical Methods for Fluid Dynamics, Univ Reading, Reading, England, 26 - 29 Mar, 2007. Published in: International Journal for Numerical Methods in Fluids, Vol.56 (No.8). pp. 1033-1046.

Barkley, D., Blackburn, H. M. and Sherwin, S. J. (2008) Direct optimal growth analysis for timesteppers. In: 14th International Conference on Finite Elements in Flow Problems, Santa Fe, NM, Mar 24-28, 2007. Published in: International Journal for Numerical Methods in Fluids, Vol.57 (No.9). pp. 1435-1458.

Barkley, Dwight. (2011) Simplifying the complexity of pipe flow. Physical Review E, Vol.84 (No.1). Article 016309 . ISSN 1063-651X

Barkley, Dwight and Tuckerman, Laurette S.. (2007) Mean flow of turbulent-laminar patterns in plane Couette flow. JOURNAL OF FLUID MECHANICS, 576 . pp. 109-137. ISSN 0022-1120

Barnes, Stuart, Pashby, I. R. and Mok, D. K.. (1996) The effect of workpiece temperature on the machinability of an aluminum/SiC MMC. Journal of Manufacturing Science and Engineering, Vol.118 (No.3). pp. 422-427. ISSN 1087-1357

Barrow, Mark P., Headley, John V., Peru, Kerry M. and Derrick, Peter J. . (2009) Data visualization for the characterization of naphthenic acids within petroleum samples. Energy & Fuels, Vol.23 (No.5). pp. 2592-2599. ISSN 0887-0624

Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.

Belver, Ali Vasallo, Živanović, Stana, Dang, HiepVu, Istrate, Melania and Iban, Antolin Lorenzana (2012) Modal testing and FE model updating of a lively staircase structure. In: IMAC XXX Conference and Exhibition on Structural Dynamics, Jacksonville, FL, U.S.A., Jan 30 - Feb 2, 2012. Published in: Topics in Modal Analysis 1, Vol. 5, Conference Proceedings of the Society for Experimental Mechanics Series, Vol.30 pp. 547-557.

Bennett, P., Stovin, V. R. and Guymer, I. (2011) Improved CFD simulation approaches for manhole mixing investigations. In: 12th International Conference on Urban Drainage, Porto Alegre, Brazil, Sep 11-16, 2011

Brend, M. A. and Thomas, P. J. (Peter J.). (2009) Decay of vortex rings in a rotating fluid. Physics of Fluids, Vol.21 (No.4). Article 044105. ISSN 1070-6631

Bryant, Angus T., Jennings, M. R., Parker-Allotey, Nii-Adotei, Mawby, P. A. (Philip A.), Pérez-Tomás, Amador, Brosselard, P., Godignon, P., Jorda, X., Milian, J., Palmer, P. R., Santi, E. and Hudgins, J. L. (2009) Physical modelling of large area 4H-SiC PiN diodes. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, September 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 494-501.

Bryden, B. G. and Pashby, I. R.. (1999) Sequential laminated tooling, joined by brazing, for injection moulding. RAPID PROTOTYPING JOURNAL, 5 (2). pp. 89-93. ISSN 1355-2546

Buescu, Jorge, Kulczycki, Marcin and Stewart, Ian, 1945-. (2006) Liapunov stability and adding machines revisited. Dynamical Systems, Vol.21 (No.3). pp. 379-384. ISSN 1468-9367

Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.

Cai, Yong and Mias, Christos. (2009) Faster 3D finite element time domain : Floquet absorbing boundary condition modelling using recursive convolution and vector fitting. IET Microwaves Antennas & Propagation, Vol.3 (No.2). pp. 310-324. ISSN 1751-8725

Cantwell, C. D., Barkley, D. and Blackburn, H. M.. (2010) Transient growth analysis of flow through a sudden expansion in a circular pipe. Physics of Fluids, Vol.22 (No.3). Article no. 034101. ISSN 1070-6631

Carpenter, P. W. (Peter William), 1942- (2007) Preface. Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 203-204. ISSN 1386-6184

Cartes, Carlos, Bustamante, Miguel D. and Brachet, Marc E.. (2007) Generalized Eulerian-Lagrangian description of Navier-Stokes dynamics. Physics of Fluids, Vol.19 (No.7). Article: 077101. ISSN 1070-6631

Cartes, Carlos, Bustamante, Miguel D., Pouquet, Annick and Brachet, Marc E.. (2009) Capturing reconnection phenomena using generalized Eulerian-Lagrangian description in Navier-Stokes and resistive MHD. Fluid Dynamics Research, Vol.41 (No.1). Article no. 011404. ISSN 0169-5983

Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.

Chen, Cheng, Ricles, James M., Karavasilis, Theodore L., Chae, Yunbyeong and Sause, Richard. (2012) Evaluation of a real-time hybrid simulation system for performance evaluation of structures with rate dependent devices subjected to seismic loading. Engineering Structures, Vol. 35 . pp. 71-82. ISSN 01410296

Chen, Cheng, Ricles, James M., Sause, Richard and Karavasilis, Theodore L. (2009) Real-time hybrid simulation with adaptive actuator control for structural engineering research. In: 3rd International Conference on Advances in Experimental Structural Engineering (3AESE), San Francisco, CA, U.S.A., Oct 15-16, 2009. Published in: Proceedings of the 3rd International Conference on Advances in Experimental Structural Engineering (3AESE)

Chen, Ting and Li, S. C.. (2011) Numerical investigation of guide-plate induced pressure fluctuations on guide vanes of Three Gorges turbines. Journal of Fluids Engineering, Vol.133 (No.6). article no. 061101. ISSN 0098-2202

Chen, Yangzhi, Liu, X., Chetwynd, D. G. (Derek G.), 1948- and Huang, P.. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. ISSN 0094-114X

Cheng, C., McGordon, Andrew, Jones, R. Peter and Jennings, P. A.. (2012) Development of a comprehensive and flexible forward dynamic powertrain simulation tool for various hybrid electric vehicle architectures. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.226 (No.3). pp. 385-398. ISSN 0954-4070

Cheng, Caizhen and Cebon, David. (2008) Improving roll stability of articulated heavy vehicles using active semi-trailer steering. Vehicle System Dynamics, Vol.46 (Suppl.1). pp. 373-388. ISSN 0042-3114

Cheng, Caizhen and Cebon, David. (2011) Parameter and state estimation for articulated heavy vehicles. Vehicle System Dynamics, Vol.49 (No.1-2). pp. 399-418. ISSN 0042-3114

Cheng, Caizhen, McGordon, Andrew, Jones, R. Peter and Jennings, P. A. (2010) Comprehensive forward dynamic HEV powertrain modelling using dymola and MATLAB/Simulink. In: 6th IFAC Symposium "Advances in Automotive Control", Munich, Germany, Jul 12-14, 2010. Published in: Proceedings of the 6th IFAC Symposium "Advances in Automotive Control" pp. 536-541.

Cheng, Caizhen, Roebuck, Richard, Odhams, Andrew and Cebon, David. (2011) High-speed optimal steering of a tractor–semitrailer. Vehicle System Dynamics, Vol.49 (No.4). pp. 561-593. ISSN 0042-3114

Cherni, Judith A., Dyner, Isaac, Henao, Felipe, Jaramillo, Patricia, Smith, Ricardo and Font, Raul Olalde. (2007) Energy supply for sustainable rural livelihoods. A multi-criteria decision-support system. Energy Policy, Vol.35 (No.3). pp. 1493-1504. ISSN 0301-4215

Chetwynd, D. G. (Derek G.), 1948- and Alsoufi, Mohammad S. (2010) A novel micro-friction measuring-head using force-feedback compensation. In: 6th International Symposium on Precision Engineering Measurements and Instrumentation, Hangzhou, 8-11 Aug 2010. Published in: SPIE Proceedings, Vol.7544 article 754417.

Cheung, David L. and Schmidt, M. (Matthias). (2009) Quenched-annealed density functional theory for interfacial behavior of hard rods at a hard rod matrix. Journal of Chemical Physics, Vol.131 (No.21). p. 214705. ISSN 0021-9606

Christou, George and Mias, Christos. (2011) Critique of optical negative refraction superlensing. Plasmonics, Vol.6 (No.2). pp. 307-309. ISSN 1557-1955

Cooper, A. J.. (2006) Effect of mean entropy on unsteady disturbance propagation in a slowly varying duct with mean swirling flow. Journal of Sound and Vibration, Vol.291 (No.3-5). pp. 779-801. ISSN 0022-460X

Cooper, A. J. and Peake, N.. (2006) Transient growth and rotor-stator interaction noise in mean swirling duct flow. JOURNAL OF SOUND AND VIBRATION, 295 (3-5). pp. 553-570. ISSN 0022-460X

Critoph, Robert E., Metcalf, Steven John and Tamainot-Telto, Zacharie. (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. ISSN 0145-7632

Critoph, Robert E., Tamainot-Telto, Zacharie and Metcalf, Steven John (2008) Development of heat driven compressors for heat pump and refrigeration applications. In: International Conference on Energy Technologies and Policy 2008, Birmingham, U.K., Sep 8-10, 2008

Da Campo, Raffaello, Barrow, Mark P., Shepherd, Andrew G., Salisbury, Malcolm and Derrick, Peter J.. (2009) Characterization of naphthenic acid singly charged noncovalent dimers and their dependence on the accumulation time within a hexapole in fourier transform ion cyclotron resonance mass spectrometry. Energy & Fuels, Vol.23 . pp. 5544-5549. ISSN 0887-0624

Das, Aruneema, Stocks, Nigel G. and Hines, Evor, 1957-. (2009) Enhanced coding for exponentially distributed signals using suprathreshold stochastic resonance. Communications in Nonlinear Science and Numerical Simulation, Vol.14 (No.1). pp. 223-232. ISSN 1007-5704

Dickens, P. M., Stangroom, R., Greul, M., Holmer, B., Hon, K. K. B., Hovtun, R., Neumann, R., Noeken, S. and Wimpenny, D.. (1995) Conversion of RP models to investment castings. RAPID PROTOTYPING JOURNAL, 1 (4). pp. 4-11. ISSN 1355-2546

Du, Y. P., Qu, Z. G., Zhao, Chang-Ying and Tao, W. Q.. (2010) Numerical study of conjugated heat transfer in metal foam filled double-pipe. International Journal of Heat and Mass Transfer, Vol.53 (No.21-22). pp. 4899-4907. ISSN 0017-9310

Dunnett, S. N. and Corbett, A. E. (1997) A counter-rotating axial-airgap induction generator using pole changing windings for developing country use. Mechanical Engineering Publications Ltd., pp. 81-88. ISBN 1860580343

Dunstan, P. J. and Li, Shengcai. (2010) Cavitation enhancement of silt erosion : numerical studies. Wear, Vol.268 (No.7-8). pp. 946-954. ISSN 0043-1648

Evans, T. S., Quarini, Giuseppe Leonardo and Shire, G. S. F.. (2008) Investigation into the transportation and melting of thick ice slurries in pipes. International Journal of Refrigeration, Vol.31 (No.1). pp. 145-151. ISSN 0140-7007

Evernden, M. C. and Mottram, J. Toby (James Toby), 1958-. (2011) Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering: an international journal, Vol.14 (No.6). pp. 991-1004. ISSN 1369-4332

Fan, X., Masters, I., Roy, R. and Williams, D.. (2007) Simulation of distortion induced in assemblies by spot welding. Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture, Vol.221 (No.8). pp. 1317-1327. ISSN 0954-4054

Fan, Xiaolei, Chen, Haisheng, Ding, Yulong, Plucinski, Pawel K. and Lapkin, Alexei. (2008) Potential of ‘nanofluids’ to further intensify microreactors. Green Chemistry, Vol.10 (No.6). pp. 670-677. ISSN 1463-9262

Fang, Yueping, Eames, Philip C. and Norton, Brian. (2007) Effect of glass thickness on the thermal performance of evacuated glazing. SOLAR ENERGY, 81 (3). pp. 395-404. ISSN 0038-092X

Fang, Yueping, Eames, Philip C., Norton, Brian, Hyde, Trevor J., Zhao, Junfu, Wang, Jinlei and Huang, Ye. (2007) Low emittance coatings and the thermal performance of vacuum glazing. SOLAR ENERGY, 81 (1). pp. 8-12. ISSN 0038-092X

Farley, Jonathan, Wrobel, L. C. (Luiz C.), 1952- and Mao, K.. (2010) Low cycle fatigue simulation and fatigue life prediction of multilayer coated surfaces. Wear, Vol.269 (No.9-10). pp. 639-646. ISSN 0043-1648

Farley, Jonathan, Wrobel, L. C. (Luiz C.), 1952- and Mao, K.. (2010) Performance evaluation of multilayer thin film coatings under mixed rolling-sliding dry contact conditions. Wear, Vol.268 (No.1-2). pp. 269-276. ISSN 0043-1648

Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.

Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.

Floro, Daniela (2009) Selecting oligopolistic models in the Italian wholesale electricity market. In: 6th International Conference on the European Energy Market, Leuven, Belgium, May 27-29, 2009. Published in: 2009 6th International Conference on the European Energy Market pp. 329-334.

Fonseca, Irene, Morini, Massimiliano and Slastikov, Valeriy. (2007) Surfactants in foam stability: a phase-field model. Archive for Rational Mechanics and Analysis, Vol.183 (No.3). pp. 411-456. ISSN 0003-9527

Fouxon, Itzhak and Horvai, Peter (2007) Fluctuation relation and pairing rule for Lyapunov exponents of inertial particles in turbulence. JOURNAL OF STATISTICAL MECHANICS-THEORY AND EXPERIMENT (AUG). -. ISSN 1742-5468

Fyodorov, Yan V., Ossipov, Alexander and Rodriguez, Alberto. (2009) The Anderson localization transition and eigenfunction multifractality in an ensemble of ultrametric random matrices. Journal of Statistical Mechanics: Theory and Experiment, Vol.2009 (December). Article no. L12001. ISSN 1742-5468

Gallagher, S. J., Norton, B. and Eames, P. C.. (2007) Quantum dot solar concentrators: Electrical conversion efficiencies and comparative concentrating factors of fabricated devices. SOLAR ENERGY, 81 (6). pp. 813-821. ISSN 0038-092X

Galtier, S. and Nazarenko, Sergey. (2008) Large-scale magnetic field sustainment by forced MHD wave turbulence. Journal of Turbulence, Vol.9 (No.40). pp. 1-10. ISSN 1468-5248

Gelfreich, Vassili and Gelfreikh, N.. (2010) Unique normal forms for area preserving maps near a fixed point with neutral multipliers. Regular and Chaotic Dynamics, Vol.15 (No.2-3). pp. 300-318. ISSN 1560-3547

Gelfreich, Vassili and Turaev, D.. (2010) Universal dynamics in a neighborhood of a generic elliptic periodic point. Regular and Chaotic Dynamics, Vol.15 (No.2-3). pp. 159-164. ISSN 1560-3547

Gerbig, Y. B., Ahmed, S. I. -U. and Chetwynd, D. G. (Derek G.). (2008) Friction and wear behaviour of pyramidal nanoscaled surface features. Wear, Vol.265 (No.3-4). pp. 497-506. ISSN 0043-1648

Gerbig, Y. B., Ahmed, S. I. -U., Chetwynd, D. G. (Derek G.), 1948- and Haefke, H.. (2006) Topography-related effects on the lubrication of nanostructured hard surfaces. TRIBOLOGY INTERNATIONAL, 39 (9). pp. 945-952. ISSN 0301-679X

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100

Gibbons, Gregory John, 1970-, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100

Giovanni, Bruno, Efremov, Alexander M., An, Chong P., Wheaton, Bryan R. and Hughes, Darren J.. (2012) Connecting the macro and microstrain responses in technical porous ceramics. Part II : microcracking. Journal of Materials Science, Vol.47 (No.8). pp. 3674-3689. ISSN 0022-2461

Giudice, Sebastiano D., Jennings, P. A., Cain, Rebecca, Humphreys, Louise and Song, W. (2011) Perceptual dimensions for electric vehicle sound quality. In: 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, Jun 13-16, 2010. Published in: Proceedings of the 39th International Congress and Exposition on Noise Control Engineering, Vol.9 pp. 7012-7021.

Goetz, Arek, van Strien, Sebastian and Vivaldi, Franco (2007) Guest editorial. Dynamical Systems, Vol.22 (No.1). p. 1. ISSN 1468-9367

Gongora, Mario Augusto, 1964- (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.

Gregorio, S. O. (Sandy O.), Haidvogel, D.B., Thomas, P.J., Taskinoglu, E.S. and Skeen, A.J.. (2011) Laboratory and numerical simulations of gravity-driven coastal currents: Departures from geostrophic theory. Dynamics of Atmospheres and Oceans, Vol.52 (No.1-2). pp. 20-50. ISSN 0377-0265

Gregorio, S. O. (Sandy O.), Thomas, P. J. (Peter J.), Brend, M. A. and Linden, P. F. (2008) Large-scale and small-scale laboratory simulations of gravity-driven coastal currents. In: 2008 Ocean Sciences Meeting, Orlando, FL, U.S.A., Mar 2-7, 2008. Published in: 2008 Ocean Sciences Meeting Abstract Book p. 143.

Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J.. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. ISSN 0933-5137

Guild, F. J., Green, M. D., Stewart, R. and Goodship, V.. (2008) Air-plasma pre-treatment for polypropylene automotive bumpers. Journal of Adhesion, Vol.84 (No.6). pp. 530-542. ISSN 0021-8464

Guo, Yue, Rao, Arun Chakrapani and Jones, R. Peter (2008) Architectural and Functional Modelling of an Automotive Driver Information System Using SysML. In: IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, Beijing, China, Oct 12-15, 2008. Published in: Proceedings of the 2008 IEEE/ASME international Conference on Mechatronic and Embedded Systems and Applications pp. 552-557.

Guyez, Estelle Marie Chantal and Thomas, P. J.. (2009) Effects of particle properties on segregation-band drift in particle-laden rimming flow. Physics of Fluids, Vol.21 (No.3). Article 033301. ISSN 1070-6631

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2008) Dynamics of band drift in particle-laden rimming flow. In: The 7th EUROMECH Fluid Mechanics Conference, University of Manchester, Manchester, U.K., Sep 14-18, 2008. Published in: EFMC7 Book of Abstracts p. 129.

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2008) Particle-laden rimming flow: dynamics of segregation banding. In: 50th British Applied Mathematics Colloquium, Manchester, U.K., Mar 31 - Apr 3, 2008

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2011) Segregation-band dynamics in particle-laden rimming flow. In: EUROMECH Colloquium 525 on Instabilities and Transition in Three-Dimensional Flows with Rotation, Lyon, France, Jun 21-23, 2011. Published in: Proceedings of EUROMECH Colloquium 525

Guyez, Estelle Marie Chantal and Thomas, P. J. (Peter J.) (2009) The spatiotemporal dynamics of segregation-band drift in particle-laden rimming flow. In: Institute of Mathematics and its Applications Conference on Dense Granular Flows, Isaac Newton Institute, Cambridge, UK, Jan 5-9, 2009

Hamilton, Ross, 1971- (1997) Continuous path : the evolution of process control technologies in post-war Britain. PhD thesis, University of Warwick.

Han, L., Chrysanthou, A., Young, Ken and O'Sullivan, J. M.. (2006) Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. Fatigue & Fracture of Engineering Materials & Structures, Vol.29 (No.8). pp. 646-654. ISSN 8756-758X

Han, L., Thornton, Martin, Li, D. and Shergold, M. (2010) Effect of setting velocity on self-piercing riveting process and joint behaviour for automotive applications. In: SAE 2010 World Congress & Exhibition, Detroit, MI, U.S.A., Apr 12-15, 2010. Published in: SAE Technical Papers

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, M.. (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. ISSN 0924-0136

Han, Li, Thornton, Martin and Shergold, M.. (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. ISSN 0264-1275

Hancox, I., Chauhan, K. V., Sullivan, Paul J., Hatton, Ross A., Moshar, A., Mulcahy, C. P. A. and Jones, T. S.. (2010) Increased efficiency of small molecule photovoltaic cells by insertion of a MoO3 hole-extracting layer. Energy & Environmental Science, Vol.3 (No.1). pp. 107-110. ISSN 1754-5692

Hazra, S. (Sumit), Williams, D. K. (David K.), Roy, Rajat and Aylmore, R.. (2008) Detecting subtle cosmetic defects in automotive skin panels. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 222 (Number 11). pp. 2203-2207. ISSN 0954-4062

He, Xiaocong, Pearson, Ian T. and Young, K. (Ken) (2008) Self-pierce riveting for sheet materials : state of the art. Journal of Materials Processing Technology, Vol.199 (No.1-3). pp. 27-36. ISSN 0924-0136

He, Xiaocong, Pearson, Ian T. and Young, Ken (2006) Free vibration characteristics of SPR joints. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Turin, ITALY, JUL 04-07, 2006. Published in: Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 3 pp. 159-167.

He, Xinyu. (2007) An example of finite-time singularities in the 3d Euler equations. Journal of Mathematical Fluid Mechanics, Vol.9 (No.3). pp. 398-410. ISSN 1422-6928

Holm, D. D. and Kerr, Robert M.. (2007) Helicity in the formation of turbulence. Physics of Fluids, Vol.19 (No.2). Article: 025101. ISSN 1070-6631

Howell, R. M., Lucey, A. D., Carpenter, P. W. (Peter William), 1942- and Pitman, M. W. (2009) Interaction between a cantilevered-free flexible plate and ideal flow. In: 7th FSI, AE and FIV Plus N Symposium held at the 2006 PV and P Conference, Vancouver, Canada, 2006. Published in: Journal of Fluids and Structures, Vol.25 (No.3). pp. 544-566.

Howell, Richard M., Lucey, Anthony D. and Carpenter, P. W. (Peter William), 1942- (2007) Instability of a cantilevered flexible plate in inviscid channel flow. In: 6th Symposium on Fluid-Structure Interactions, Aeroelasticity and Flow-Induced Vibration and Noise, Vancouver, CANADA, JUL 23-27, 2006. Published in: PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE VOL 9 pp. 769-776.

Huang, Tian, Liu, H. T. and Chetwynd, D. G. (Derek G.), 1948-. (2011) Generalized Jacobian analysis of lower mobility manipulators. Mechanism and Machine Theory, Vol.46 (No.6). pp. 831-844. ISSN 0094-114X

Izquierdo, L. E., Hu, S. Jack, Du, Hao, Jin, Ran, Jee, Haeseong and Shi, Jianjun. (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. Journal of Manufacturing Science and Engineering, Vol.131 (No.4). Article no. 041008. ISSN 1087-1357

Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.

Jenkins, D. P., Singh, H. and Eames, Philip C.. (2009) Interventions for large-scale carbon emission reductions in future UK offices. Energy and Buildings, Vol.41 (No.12). pp. 1374-1380. ISSN 0378-7788

Jennings, P. A., Dunne, G., Williams, R. and Giudice, Sebastiano D.. (2010) Tools and techniques for understanding the fundamentals of automotive sound quality. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.224 (No.10). pp. 1263-1278. ISSN 0954-4070

Jones, P. (Peter), Dr., Mao, Ken, Phang, A. and Allen, B.. (2011) Effects of linear and angular misalignment on a spur gear pair. Insight, Vol.53 (No.8). pp. 420-425. ISSN 1354-2575

Jung, Seo Yoon and Chung, Yongmann M.. (2012) Large-eddy simulation of accelerated turbulent flow in a circular pipe. International Journal of Heat and Fluid Flow, Volume 33 (Number 1). pp. 1-8. ISSN 0142727X

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Drift and ductility estimates in regular steel MRF subjected to ordinary ground motions : a design-oriented approach. Earthquake Spectra, Vol.24 (No.2). pp. 431-451. ISSN 8755-2930

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Estimation of seismic inelastic deformation demands in plane steel MRF with vertical mass irregularities. Engineering Structures, Vol.30 (No.11). pp. 3265-3275. ISSN 0141-0296

Karavasilis, Theodore L., Bazeos, Nikitas and Beskos, D. E.. (2008) Seismic response of plane steel MRF with setbacks: estimation of inelastic deformation demands. Journal of Constructional Steel Research, Vol.64 (No.6). pp. 644-654. ISSN 0143-974X

Karavasilis, Theodore L., Kerawala, Sanaya and Hale, Emma. (2012) Hysteretic model for steel energy dissipation devices and evaluation of a minimal-damage seismic design approach for steel buildings. Journal of Constructional Steel Research, Vol.70 . pp. 358-367. ISSN 0143-974X

Karavasilis, Theodore L., Makris, Nicos, Bazeos, Nikitas and Beskos, D. E.. (2010) Dimensional response analysis of multistorey regular steel MRF subjected to pulselike earthquake ground motions. Journal of Structural Engineering, Vol.136 (No.8). pp. 921-932. ISSN 0733-9445

Karavasilis, Theodore L., Sause, Richard, Chae, Yunbyeong, Ricles, James M. and Chen, Cheng (2010) Design and experimental evaluation of steel MRF with magneto-rheological dampers for seismic hazard mitigation. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 111 pp. 767-773.

Karavasilis, Theodore L., Sause, Richard, Ricles, James M. and Chen, Cheng (2009) Large-scale real-time hybrid simulation of steel MRFs equipped with compressed elastomer dampers. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 10 pp. 67-72.

Kendall, K., Du, S., Morris, S. and Sweet, C.. (2010) Virus concentration and adhesion measured by laser tracking. Journal of Adhesion, Vol.86 (No.10 Sp. Iss. SI). pp. 1029-1040. ISSN 0021-8464

Kerr, Robert M. (2006) Helicity generation in three-dimensional Euler and turbulence. In: IUTAM Symposium on Elecmentary Vortices and Coherent Structures - Significance in Turbulence Dynamics, Kyoto, JAPAN, OCT 26-28, 2004. Published in: IUTAM Symposium on Elementary Vortices and Coherent Structures: Significance in Turbulence Dynamics, 79 pp. 329-337.

Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.

Khovanova, N. A. and Khovanov, I. A.. (2011) The role of excitations statistic and nonlinearity in energy harvesting from random impulsive excitations. Applied Physics Letters, Vol.99 (No.14). Article: 144101144101. ISSN 0003-6951

Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.

King, G. P., Rudman, Murray and Rowlands, G. (George). (2008) Chaotic diffusion in steady wavy vortex flow - Dependence on wave state and correlation with Eulerian symmetry measures. Fluid Dynamics Research, Vol.40 (No.1). pp. 45-67. ISSN 0169-5983

Kituara, Hidekazu, Murai, Yuichi, Takeda, Yasushi and Thomas, P. J. (Peter J.). (2010) Velocity vector field measurement of vortex rings using UVP. Transactions of the Japanese Society of Mechanical Engineers, Vol.76 (No.772). pp. 2143-2151. ISSN 0387-5016

Kudar, K. L. and Carpenter, P. W. (Peter William), 1942-. (2007) Numerical investigation and feasibility study of a PZT-driven micro-valve pulsed-jet actuator. Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 223-254. ISSN 1386-6184

Kudar, Karen L. and Carpenter, P. W. (Peter William), 1942- (2008) Numerical investigation of a micro-valve pulsed-jet actuator. In: IUTAM Symposium on Flow Control and MEMS, Royal Geog Soc, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 pp. 45-51.

Lewis, W. J., Brew, J. S., Bryanston-Cross, P. and Nawasra, J. S.. (2011) Form-finding as a modelling tool for shaping mechanical components: a feasibility case study of an axial-flow compressor blade. Engineering Structures, Vol.33 (No.9). pp. 2612-2620. ISSN 0141-0296

Li, Shuai and Li, Shengcai (2009) Interaction of single laser generated cavitation bubble with elastic boundary. In: International Conference on Experimental Fluid Mechanics, Liberec, Czech Republic, November 25-27, 2009. Published in: Proceedings of the International Conference on Experimental Fluid Mechanics 2009 pp. 196-211.

Li, Shuai and Li, Shengcai (2009) Interaction of two laser induced cavitation bubbles. In: International Conference on Experimental Fluid Mechanics, Liberec, Czech Republic, November 25-27, 2009. Published in: Proceedings of the International Conference on Experimental Fluid Mechanics 2009 pp. 179-196.

Li, Wei, Wood, A., Weidig, R. and Mao, K.. (2011) An investigation on the wear behaviour of dissimilar polymer gear engagements. Wear, Vol.271 (No.9-10). pp. 2176-2183. ISSN 0043-1648

Li, Y. G., Liu, H. T., Zhao, X. M., Huang, Tian and Chetwynd, D. G. (Derek G.), 1948-. (2010) Design of a 3-DOF PKM module for large structural component machining. Mechanism and Machine Theory, Vol.45 (No.6). pp. 941-954. ISSN 0094-114X

Li, Z., Izquierdo, L. E., Kokkolaras, M., Hu, S. J. and Papalambros, Panos Y. (2008) Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly. Journal of Manufacturing Science and Engineering, Volume 130 (Number 4). 0445011-0445016. ISSN 1087-1357

Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.

Li S., , Zuo Z. G., and Li S. C., (2006) Stochastic study of cavitation bubbles near boundary wall. In: Conference on Global Chinese Scholars on Hydrodynamics, Shanghai, PEOPLES R CHINA, JUL 11-14, 2006. Published in: Proceedings of the Conference of Global Chinese Scholars on Hydrodynamics pp. 487-491.

Li S. C., , Wu Y. L., , Dai J., , Zuo Z. G., and Li S., (2006) Cavitation resonance: The phenomenon and unknown. In: Conference on Global Chinese Scholars on Hydrodynamics, Shanghai, PEOPLES R CHINA, JUL 11-14, 2006. Published in: Proceedings of the Conference of Global Chinese Scholars on Hydrodynamics pp. 356-362.

Liu, H., Huang, Tian and Chetwynd, D. G. (Derek G.), 1948-. (2011) A method to formulate a dimensionally homogeneous Jacobian of parallel manipulators. IEEE Transactions on Robotics, Vol.27 (No.1). pp. 150-156. ISSN 1552-3098

Liu, H. T., Huang, T., Zhao, X. M., Mei, J. P. and Chetwynd, D. G. (Derek G.), 1948-. (2007) Optimal design of the TriVariant robot to achieve a nearly axial symmetry of kinematic performance. MECHANISM AND MACHINE THEORY, 42 (12). pp. 1643-1652. ISSN 0094-114X

Liu, Haitao, Huang, T. (Tian) and Chetwynd, D. G. (Derek G.), 1948-. (2011) An approach for acceleration analysis of lower mobility parallel manipulators. Journal of Mechanisms and Robotics, Vol.3 (No.1). 011013. ISSN 19424302

Liu, Haitao, Huang, T. (Tian) and Chetwynd, D. G. (Derek G.), 1948-. (2011) A general approach for geometric error modeling of lower mobility parallel manipulators. Journal of Mechanisms and Robotics, Vol.3 (No.2). 021013. ISSN 19424302

Liu, Haitao, Huang, Tian, Mei, Jianping, Zhao, Xueman, Chetwynd, D. G. (Derek G.), 1948-, Li, Meng and Hu, S. Jack. (2007) Kinematic design of a 5-DOF hybrid robot with large workspace/limb-stroke ratio. Journal of Mechanical Design, Vol.129 (No.5). pp. 530-537. ISSN 1050-0472

Liu, Kuo-Kang, Wu, Ren-Guei, Chuang, Yun-Ju, Khoo, Hwa Seng, Huang, Shih-Hao and Tseng, Fan-Gang (2010) Microfluidic systems for biosensing. Sensors, Vol.10 (No.7). pp. 6623-6661. ISSN 1424-8220

Liu, Shuhong, Li, Shengcai and Wu, Yulin. (2009) Pressure fluctuation prediction of a model Kaplan turbine by unsteady turbulent flow simulation. Journal of Fluids Engineering, Vol.131 (No.10). p. 101102. ISSN 0098-2202

Liu, X., Yue, Zhaoyang, Cai, Z., Chetwynd, D. G. (Derek G.), 1948- and Smith, S. T. (Stuart T.), 1961-. (2008) Quantifying touch-feel perception : tribological aspects. Measurement Science and Technology, Vol.19 (No.8). Article: 084007. ISSN 0957-0233

Lockerby, D. A. and Reese, J. M. (2007) Near-wall scaling of the Navier-Stokes constitutive relations for accurate micro gas flow simulations. In: 5th International Conference on Nanochannels, Microchannels, and Minichannels, Puebla, MEXICO, JUN 18-20, 2007. Published in: ICNMM2007: PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON NANOCHANNELS, MICROCHANNELS, AND MINICHANNELS pp. 357-363.

Lockerby, Duncan A., Carpenter, P. W. (Peter William), 1942- and Davies, Christopher (2008) Is Helmholtz resonance a problem for micro-jet actuators? In: IUTAM Symposium on Flow Control and MEMS, Royal Geographical Society, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 (Part 2). pp. 95-101.

Lockerby, Duncan A., Carpenter, P. W. (Peter William), 1942- and Davies, Christopher. (2007) Is Helmholtz resonance a problem for micro-jet actuators? Flow, Turbulence and Combustion, Vol.78 (No.3-4). pp. 205-222. ISSN 1386-6184

Lockerby, Duncan A., Reese, Jason and Struchtrup, Henning. (2009) Switching criteria for hybrid rarefied gas flow solvers. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.465 (No.2105). pp. 1581-1598. ISSN 1364-5021

Lockerby, Duncan A., Struchtrup, Henning and Reese, Jason M.. (2008) Switching criteria for hybrid rarefied gas flow solvers. Rarefied Gas Dynamics: Proceedings of the 26th International Symposium on Rarefied Gas Dynamics, Vol.1084 . pp. 434-440. ISSN 0094-243X

Lu, Dawei, Barnes, Stuart and Minor, K. (2004) Removed and damaged area prediction in PMC laser machining using artificial neural networks. In: International Conference on the Behaviour of Materials in Machining, University of Warwick, 15th - 17th November 2004. Published in: Proceedings of the International Conference on the Behaviour of Materials in Machining pp. 290-297. (Unpublished)

Lu, Wei and Zhao, Chang-Ying. (2009) Numerical modelling of flow boiling heat transfer in horizontal metal-foam tubes. Advanced Engineering Materials, Vol.11 (No.10). pp. 832-836. ISSN 1438-1656

Luo, Xing, Sun, Hao and Wang, Jihong (2011) An energy efficient pneumatic-electrical system and control strategy development. In: American Control Conference 2011 (ACC), San Francisco, California, USA, June 29 - July 1, 2011. Published in: Proceedings of the American Control Conference, 2011 pp. 4743-4748.

Ma, He, Xu, Hong-Ming and Wang, Ji-Hong. (2011) Real-time control oriented HCCI engine cycle-to-cycle dynamic modelling. International Journal of Automation and Computing , Vol.8 (No.3). pp. 317-325. ISSN 1476-8186

MacKay, R. S.. (2006) Cerbelli and Giona's map is pseudo-Anosov and nine consequences. Journal of Nonlinear Science, Vol.16 (No.4). pp. 415-434. ISSN 0938-8974

Mahmood, N. H. and Tjahjadi, Tardi (2010) 3D reconstruction for prosthetic design. In: 2010 Second International Conference on Computer Engineering and Applications (ICCEA), Bali Island, Indonesia, Mar 19-21, 2010. Published in: Proceedings of the 2010 Second International Conference on Computer Engineering and Applications (ICCEA), Vol.1 pp. 431-435.

Mahmoudi, Shiva, Baeyens, Jan and Seville, Jonathan P. K.. (2010) NOx formation and selective non-catalytic reduction (SNCR) in a fluidized bed combustor of biomass. Biomass and Bioenergy, Vol.34 (No.9). pp. 1393-1409. ISSN 0961-9534

Malard, B., Pilch, J., Sittner, P., Davydov, V. (Vadim), Sedlák, P., Konstantinidis, K. and Hughes, Darren J.. (2012) Internal stresses in steel plate generated by shape memory alloy inserts. Acta Materialia, Vol.60 (No.3). pp. 1378-1394. ISSN 1359-6454

Mallick, Tapas K. and Eames, Philip C.. (2007) Design and fabrication of low concentrating second generation PRIDE concentrator. Solar Energy Materials and Solar Cells, Vol.91 (No.7). pp. 597-608. ISSN 0927-0248

Mallick, Tapas K. and Eames, Philip C. (2007) Optical and thermal performance predictions for a high concentration point focus photovoltaic system. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, PEOPLES R CHINA, SEP 18-21, 2007. Published in: PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V pp. 1500-1504.

Mallick, Tapas K., Eames, Philip C. and Norton, Brian. (2007) Power losses in an asymmetric compound parabolic photovoltaic concentrator. Solar Energy Materials and Solar Cells, Vol.91 (No.12). pp. 1137-1146. ISSN 0927-0248

Mao, K., Li, W., Hooke, C. J. and Walton, D.. (2009) Friction and wear behaviour of acetal and nylon gears. Wear, Vol.267 (No.1-4 Part 1 Sp. Iss. SI). pp. 639-645. ISSN 0043-1648

Mao, K., Liebig, W., Hooke, C. J. and Walton, D.. (2010) Polymer gear surface thermal wear and its performance prediction. Tribology International, Vol.43 (No.1-2). pp. 433-439. ISSN 0301-679X

Mao, K., Sun, Y., Bloyce, A. and Bell, T.. (2010) Surface coating effects on contact stress and wear : an approach of surface engineering design and modelling. Surface Engineering, Vol.26 (No.1-2). pp. 142-148. ISSN 0267-0844

Marco, James, Ball, R., Jones, R. P. and Lillie, K.. (2001) A systems modelling and simulation approach to gear shift effort analysis. International Journal of Vehicle Design, Vol.25 (No.4). pp. 317-338. ISSN 0143-3369

Marco, James, Ball, R., Jones, R. P. and Roxburgh, A.. (2002) The design and hardware-in-the-loop simulation test of a parallel hybrid transmission control system. International Journal of Vehicle Design, Vol.30 (No.4). pp. 362-385. ISSN 0143-3369

Masters, I., Fan, X., Roy, R. and Williams, D.. (2012) Modelling distortion induced in an assembly by the self piercing rivet process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.226 (No.2). pp. 300-312. ISSN 0954-4054

McDonnell, Mark D., 1975-, Amblard, Pierre-Olivier and Stocks, Nigel G.. (2009) Stochastic pooling networks. Journal of Statistical Mechanics: Theory and Experiment, Vol.2009 (January 2009). Article: P01012. ISSN 1742-5468

Meegahawatte, Danushka, Hillmansen, Stuart, Roberts, Clive, Falco, Marco, McGordon, Andrew and Jennings, Paul (2010) Analysis of a fuel cell hybrid commuter railway vehicle. In: Spring Meeting of the European-Materials-Research-Society, Strasbourg, FRANCE, JUN 08-12, 2009. Published in: Journal of Power Sources, Vol.195 (No.23). pp. 7829-7837.

Meredith, James O., Cozien-Cazuc, Sophie, Collings, Ed, Carter, Sam, Alsop, Stewart, Lever, Jon, Coles, Stuart R., Wood, Benjamin M. and Kirwan, Kerry. (2012) Recycled carbon fibre for high performance energy absorption. Composites Science and Technology, Vol.72 (No.6). pp. 688-695. ISSN 0266-3538

Meredith, James O., Ebsworth, Richard, Coles, Stuart R., Wood, Benjamin M. and Kirwan, Kerry. (2012) Natural fibre composite energy absorption structures. Composites Science and Technology, Vol.72 (No.2). pp. 211-217. ISSN 0266-3538

Metcalf, S.J., Tamainot-Telto, Zacharie and Critoph, Robert E. (2008) Novel compact sorption generators for heat pump applications. In: 9th International Energy Agency Heat Pump Conference 2008, Zurich, Switzerland, May 20-22, 2008

Metcalf, Steven John (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.

Moat, R. J., Hughes, Darren J., Steuwer, A., Iqbal, N., Preuss, M., Bray, S. E. and Rawson, M.. (2009) Residual stresses in inertia-friction-welded dissimilar high-strength steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.40 (No.9). pp. 2098-2108. ISSN 1073-5623

Mohamed, Omar, Wang, Jihong, Guo, Shen, Wei, Jianlin, Al-Duri, Bushra, Lv, Junfu and Gao, Qirui (2011) Mathematical modelling for coal fired supercritical power plants and model parameter identification using genetic algorithms. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. Lecture Notes in Electrical Engineering, Vol.90 . Dordrecht, Netherlands: Springer Science+Business Media B.V., pp. 1-13. ISBN 978-94-007-1191-4

Mottram, J. Toby (James Toby), 1958-. (2010) Prediction of net-tension strength for multirow bolted connections of pultruded material using the Hart-Smith semi-empirical modeling approach. Journal of Composites for Construction, Vol.14 (No.1). pp. 105-114. ISSN 1090-0268

Muetze, Annette and Oh, H. William. (2008) Application of static charge dissipation to mitigate electric discharge bearing currents. IEEE Transactions on Industry Applications, Vol.44 (No.1). pp. 135-143. ISSN 0093-9994

Murugaratnam, K. and Utili, S. (2011) Shot peening optimization using the discrete element method. In: 11th International Conference on Shot Peening, South Bend, IN, U.S.A., Sep 12-15, 2011. Published in: Proceedings of the 11th International Conference on Shot Peening pp. 135-140.

Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.

Noble, Ralph, Elphinstone, J. G., Sansford, C. E., Budge, G. E. and Henry, C. M. (2009) Management of plant health risks associated with processing of plant-based wastes: a review. Bioresource Technology, Vol.100 (No.14). pp. 3431-3446. ISSN 0960-8524

O'Doherty, T., Egarr, D. A., Faram, M. G., Guymer, Ian and Syred, N.. (2009) Assessment of residence time in a hydrodynamic vortex separator by applying distribution models. Institution of Mechanical Engineers. Proceedings. Part E: Journal of Process Mechanical Engineering, Vol.223 (No.E3). pp. 179-188. ISSN 0954-4089

O'Doherty, T., Egarr, D. A., Faram, M. G., Guymer, Ian and Syred, N.. (2009) Residence time study of a hydrodynamic vortex separator applied to predicting disinfection performance. Institution of Mechanical Engineers. Proceedings. Part E: Journal of Process Mechanical Engineering, Vol.223 (No.E3). pp. 113-122. ISSN 0954-4089

Oishi, Y., Brend, M. A., Thomas, P. J. (Peter J.), Murai, Yuichi and Takeda, Yasushi (2008) Measurement of oscillating vortex ring of fundamental mode using color PTV. In: 36th Symposium on Visualisation, Tokyo, Japan, Jul 22-23, 2008. Published in: Proceedings of the 36th Symposium on Visualization

Oliveira, Fernando. (2008) The value of information in electricity investment games. Energy Policy, Vol.36 (No.7). pp. 2364-2375. ISSN 0301-4215

Oswald, Andrew J. , Oswald, James I. and Ashraf-Ball, Hezlin (2009) Hydrogen transport and the spatial requirements of renewable energy. Working Paper. Coventry: University of Warwick, Department of Economics. (Warwick economic research papers.

Papadakis, N., Ramirez, C. and Reynolds, N. (2009) Designing composite wind turbine blades for disposal, recycling or reuse. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 443-457. ISBN 9781845694623

Parker, M. J., Stewart, Ian and Gomes, M. G. M.. (2008) Partial classification of heteroclinic behaviour associated with the perturbation of hexagonal planforms. Dynamical Systems, Vol.23 (No.2). pp. 137-162. ISSN 1468-9367

Pavić, Aleksandar, Brownjohn, J.M.W. and Živanović, Stana (2010) VSATs software for assessing and visualising floor vibration serviceability based on first principles. In: 2010 Structures Congress, Orlando, FL, U.S.A., May 12-15, 2010. Published in: Proceedings of the 2010 Structures Congress pp. 82-92.

Pedcenko, A., Molokov, S., Priede, J., Lukyanov, A. and Thomas, P. J.. (2009) Experimental model of the interfacial instability in aluminium reduction cells. EPL (Europhysics Letters), Vol.88 (No.2). Article 24001. ISSN 0295-5075

Pedcenko, A., Molokov, S., Thomas, P. J. (Peter J.), Lukyanov, A. and Priede, J. (2008) Experimental study of interfacial instability in aluminium reduction cells. In: 7th International Pamir Conference on Fundamental and Applied MHD, Presq'uile de Giens, France, Sep 8-12, 2008. Published in: Proceedings of the 7th International Pamir Conference on Fundamental and Applied MHD pp. 923-927.

Petoussis, A. G., Petoussis, S. G., Zhang, X-P. and Godfrey, K. R. (2008) New entries in the electricity market: Choosing the best location for a new generating unit. In: 3rd International Conference on Electric Utility Deregulation, Restructuring and Power Technologies, Nanjing, China, Apr 06-09, 2008. Published in: Proceedings of the 3rd International Conference on Electric Utility Deregulation, Restructuring and Power Technologies, Vol.1 pp. 61-65.

Petoussis, A. G., Petoussis, S. G. and Zhang, X. -P. (2007) Market equilibrium in congested transmission networks with transformer tap-ratio control. In: IEEE Lausanne Powertech, Lausanne, SWITZERLAND, JUL 01-05, 2007. Published in: 2007 IEEE LAUSANNE POWERTECH, VOLS 1-5 pp. 949-954.

Petoussis, S. G., Zhang, X.-P., Petoussis, A. G. and Godfrey, K. R. (2006) The impact of reactive power on the electricity market equilibrium. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 96-102.

Phoomboplab, T. and Ceglarek, Darek. (2008) Process yield improvement through optimum design of fixture layouts in 3D multistation assembly systems. Journal of Manufacturing Science and Engineering, Vol.130 (No.6). ISSN 1087-1357

Pinfold, Martyn, Chapman, Craig and Preston, Steve. (2008) Knowledge acquisition and documentation for the development of a KBE system for automated FE analysis. International Journal of Knowledge Management Studies, Vol.2 (No.2). pp. 163-174. ISSN 1743-8268

Raja, Vinesh and Fernandes, Kiran J. (2008) Reverse engineering: an industrial perspective. Springer Series in Advanced Manufacturing, Vol.18 . Godalming, Surrey, U.K.: Springer Verlag London Ltd.. ISBN 978-1-84628-855-5

Redpath, David A. G., Eames, Philip C., Lo, Steve N. G. and Griffiths, Phillip W.. (2009) Experimental investigation of natural convection heat exchange within a physical model of the manifold chamber of a thermosyphon heat-pipe evacuated tube solar water heater. Solar Energy, Vol.83 (No.7). pp. 988-997. ISSN 0038-092X

Reese, Jason M., Lockerby, Duncan A. and Emerson, David R. (2009) Gas dynamics at the micro-scale: a review of progress in hydrodynamic modelling. In: 2nd Micro and Nano Flows Conference, Brunel University, West London, U.K., Sep 1-2, 2009 pp. 1-8. (In Press)

Revell, Philip Scott, 1956- (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.

Ricles, James M., Karavasilis, Theodore L. and Sause, Richard (2009) Seismic design and evaluation of steel MRFs with compressed elastomer dampers. In: Sixth International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA 2009), Philadelphia, Pennsylvania, U.S.A., Aug 16-20, 2009. Published in: STESSA 2009: Proceedings of the Sixth International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 15 pp. 101-107.

Roberts, G. J., Bryant, A. T., Mawby, P. A. (Philip A.), Ueta, T., Nisijima, T. and Hamada, K. (2007) Evaluation of silicon carbide devices for hybrid vehicle drives. In: 2007 European Conference on Power Electronics and Applications, Aalborg, DENMARK, SEP 02-05, 2007. Published in: 2007 EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-10 pp. 2662-2671.

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Burrows, Clifford R. and Keogh, Patrick S.. (2010) A multiobjective adaptive controller for magnetic bearing systems. Journal of Engineering for Gas Turbines and Power, Vol.132 (No.12). article no. 122503 . ISSN 0742-4795

Sahinkaya, M. Necip, Abulrub, Abdul-Hadi G., Keogh, P. S. and Burrows, C. R. (Clifford Robert). (2011) Experiments on the transient performance of an adaptive multi-objective controller for rotating machinery. Journal of Engineering for Gas Turbines and Power, Vol.133 (No.2). 022503-1-022503-7. ISSN 0742-4795

Sartbaeva, A., Kuznetsov, V. L., Wells, Stephen A. and Edwards, P. P.. (2008) Hydrogen nexus in a sustainable energy future. Energy & Environmental Science, Vol.1 (No.1). pp. 79-85. ISSN 1754-5692

Satti, Teysseer, Young, Ken and Grover, Samuel. (2009) Detecting catastrophic failure events in large-scale milling machines. International Journal of Machine Tools and Manufacture, Vol.49 (No.14). pp. 1104-1113. ISSN 0890-6955

Savan, Alan, Wosik, Jaroslaw, Gerbig, Yvonne B. and Spiradek-Hahn, Krystina. (2008) Ceramic nitride/metal coatings with enhanced fracture toughness and fatigue resistance using a multiscalar laminate architecture. International Journal of Surface Science and Engineering, Vol.2 (No.6). pp. 419-438. ISSN 1749-785X

Sbano, L. and Southall, J.. (2010) Periodic solutions of the N-body problem with Lennard-Jones-type potentials. Dynamical Systems, Vol.25 (No.1). pp. 53-73. ISSN 1468-9367

Seiden, G. and Thomas, P. J. (Peter J.). (2011) Complexity, segregation, and pattern formation in rotating-drum flows. Reviews of Modern Physics, Vol.83 (No.4). pp. 1323-1365. ISSN 0034-6861

Shah, A.A., Brindley, J., McIntosh, A.C. and Rademacher, J.. (2008) The effects of heat exchange and fluid production on the ignition of a porous solid. Nonlinear Analysis: Real World Applications, Vol.9 (No.2). pp. 562-584. ISSN 1468-1218

Shire, G. S. F., Quarini, Giuseppe Leonardo and Evans, T. S.. (2009) Pressure drop of flowing ice slurries in industrial heat exchangers. Applied Thermal Engineering, Vol.29 (No.8-9). pp. 1500-1506. ISSN 1359-4311

Shire, G. S. F., Quarini, Giuseppe Leonardo, Rhys, T. D. L. and Evans, T. S.. (2008) The anomalous pressure drop behaviour of ice slurries flowing through constrictions. International Journal of Multiphase Flow, Vol.34 (No.5). pp. 510-515. ISSN 0301-9322

Shire, G. S. F., Tamainot-Telto, Zacharie, Critoph, Robert E., Metcalf, Steven John, Carruthers, J. D. and Sweeney, J. B. (2010) Design and test of a 4m3 solar refrigerator. In: EuroSun 2010 - International Conference on Solar Heating, Cooling and Buildings, Graz, Austria, Sep 28 - Oct 1, 2010

Singh, H., Muetze, Annette and Eames, P. C.. (2010) Factors influencing the uptake of heat pump technology by the UK domestic sector. Renewable Energy, Vol.35 (No.4). pp. 873-878. ISSN 0960-1481

Skeen, Andrew, 1980- (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.

Smith, S. T. (Stuart T.), 1961- (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.

Stewart, Ian and Parker , Martyn. (2008) Periodic dynamics of coupled cell networks II : cyclic symmetry. Dynamical Systems, Vol.23 (No.1). pp. 17-41. ISSN 1468-9367

Stewart, Ian, 1945- and Parker, Martyn. (2007) Periodic dynamics of coupled cell networks I: rigid patterns of synchrony and phase relations. Dynamical Systems: An international journal, Vol.22 (No.4). pp. 389-450. ISSN 1468-9367

Stovin, V. R., Guymer, Ian and Lau, Shing-Tak Douglas. (2010) Dimensionless method to characterize the mixing effects of surcharged manholes. Journal of Hydraulic Engineering (Reston), Vol.136 (No.5). pp. 318-327. ISSN 0733-9429

Sullivan, T., Koslowski, M., Theil, Florian and Ortiz, M.. (2009) On the behavior of dissipative systems in contact with a heat bath : application to Andrade creep. Journal of the Mechanics and Physics of Solids, Vol.57 (No.7). pp. 1058-1077. ISSN 0022-5096

Sun, Hao, Wang, Jihong, Guo, Shen and Luo, Xing (2011) Study on a wind turbine in hybrid connection with a energy storage system. In: Ao, S.I. and Gelman, L., (eds.) Electrical Engineering and Applied Computing. Lecture Notes in Electrical Engineering, Vol.90 . Dordrecht, Netherlands: Springer Science+Business Media B.V., pp. 39-52. ISBN 978-94-007-1191-4

Swan, I. R. (Ian R.), Bryant, A. T., Parker-Allotey, Nii-Adotei and Mawby, P. A. (Philip A.) (2009) 3-D thermal simulation of power module packaging. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, Sepbember 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 1185-1192.

Tamainot-Telto, Zacharie, Metcalf, Steven John and Critoph, Robert E. (2009) Novel sorption generator for heat pump and refrigeration applications. In: Heat Powered Cycles Conference 2009, Berlin, Germany, Sep 7-9, 2009

Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E., Zhong, Y. and Thorpe, Roger. (2009) Carbon-ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping. International Journal of Refrigeration, Vol.32 (No.6). pp. 1212-1229. ISSN 0140-7007

Tandy, Michael J., Winkvist, Stefan and Young, Ken (2010) Competing in the RoboCup Rescue Robot League. In: Robotics for Risky Interventions and Surveillance of the Environment (RISE), Sheffield Hallam University, Sheffield, England, 20-21 January 2010. Published in: Proceedings of Robotics for Risky Interventions and Surveillance of the Environment, Vol.2010

Tenchev, Rosen and Purnell, Phil (2007) Reply to comments to the paper "An application of a damage constitutive model to concrete at high temperature and prediction of spalling" by Rosen Tenchev and Phil Purnell [Int. J. Solids Struct. 42 (26) (2005) 6550-6565]. International Journal of Solids and Structures, Vol.44 (No.11-12). pp. 4238-4241. ISSN 0020-7683

Thomas, P. J. and Linden, P. F.. (2007) Rotating gravity currents: small-scale and large-scale laboratory experiments and a geostrophic model. Journal of Fluid Mechanics, Vol.578 . pp. 35-65. ISSN 0022-1120

Thomas, P. J. (Peter J.), Zoueshtiagh, F., Merlen, A. and Thomy, V. (2008) Micro ripples, sand ripples and their universal wavelength scaling. In: The 7th EUROMECH Fluid Mechanics Conference, University of Manchester, Manchester, U.K., Sep 14-18, 2008. Published in: EFMC7 Book of Abstracts p. 326.

Tian, Yanling, Liu, X., Zhang, D. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Dynamic modelling of the fidelity of random surface measurement by the stylus method. Wear, Vol.266 (No.5-6). pp. 555-559. ISSN 0043-1648

Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Design and forward kinematics of the compliant micro-manipulator with lever mechanisms. Precision Engineering, Vol.33 (No.4). pp. 466-475. ISSN 0141-6359

Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Effects of the heat source profiles on the thermal distribution for ultraprecision grinding. Precision Engineering, Vol.33 (No.4). pp. 447-458. ISSN 0141-6359

Tian, Yuan and Zhao, Chang-Ying (2009) Heat transfer analysis for phase change materials (PCMs). In: The 11th International Conference on Energy Storage (Effstock 2009), Stockholm, Sweden, Jul 14-17, 2009. Published in: Effstock Conference Proceedings 2009 (No.28).

Tian, Yuan and Zhao, Chang-Ying (2009) Numerical investigations of heat transfer in phase change materials using non-equilibrium model. In: The Eleventh UK National Heat Transfer Conference, London, UK , 6-8 September 2009. Published in: Proceedings of 11th UK National Heat Transfer Conference

Tian, Yuan and Zhao, Chang-Ying. (2013) A review of solar collectors and thermal energy storage in solar thermal applications. Applied Energy, Vol.104 . pp. 538-553. ISSN 0306-2619

Tian, Yuan, Zhao, Chang-Ying and Lapkin, Alexei (2012) Exergy optimisation for cascaded thermal storage. In: 12th International Conference on Energy Storage (InnoStock 2012), Lleida, Spain, 16-19 May 2012. Published in: Proceedings of the 12th International Conference on Energy Storage

Tucker, R. J. (Robert James), 1951-, Ward, J., Holmes, M., Chong, Z. S., Rhine, J. M. (Jeffrey Michael), 1947- and Jones, D.. (2008) Development and experimental testing of a porous ceramic wall to improve the thermal performance of steel billet reheating furnaces. Journal of the Energy Institute, Vol.81 (No.3). pp. 135-142. ISSN 1743-9671

Van de Velden, Manon, Baeyens, Jan, Brems, Anke, Janssens, Bart and Dewil, Raf. (2010) Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction. Renewable Energy, Vol.35 (No.1). pp. 232-242. ISSN 09601481

Vasdravellis, G., Uy, B. and Karavasilis, Theodore L. (2012) Experimental validation of steel post-tensioned connections with web hourglass pins. In: 7th International Conference on Behaviour of Steel Structures in Seismic Areas (STESSA), Santiago, Chile, Jan 09-11, 2012. Published in: STESSA 2012: Proceedings of the 7th International Conference on Behaviour of Steel Structures in Seismic Areas, Chapter 94 pp. 677-683. (In Press)

Veselovskaya, J. V., Critoph, Robert E., Thorpe, Roger, Metcalf, S., Tokarev, M. M. and Aristov, Yu. I.. (2010) Novel ammonia sorbents "porous matrix modified by active salt" for adsorptive heat transformation : 3. Testing of "BaCl2/vermiculite" composite in a lab-scale adsorption chiller. Applied Thermal Engineering, Vol.30 (No.10). pp. 1188-1192. ISSN 1359-4311

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.) and Hollerbach, R. (2009) Effect of the sign of ro on the stability of Stewartson layers generated by a rotating disc. In: 62nd Annual Meeting of the APS Division of Fluid Dynamics , Minneapolis, MN, U.S.A., Nov 22-24, 2009. Published in: Bulletin of the American Physical Society, Vol.54 (No.19). p. 290.

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.), Hollerbach, R. and Kerr, Robert M. (2011) Taylor columns in deep water: testing the limits of the Taylor-Proudman theorem. In: 64th Annual Meeting of the APS Division of Fluid Dynamics, Baltimore, Maryland, Nov 20-22, 2011. Published in: Bulletin of the American Physical Society, Vol.56 (No.18). pp. 140-141.

Vlaskamp, Jozef H. A., Thomas, P. J. (Peter J.), Hollerbach, R. and Kerr, Robert M. (2010) A stereo-PIV study of the Taylor-Column generated by a rotating disk. In: 63rd Annual Meeting of the APS Division of Fluid Dynamics, Long Beach, CA, U.S.A., Nov 21-23, 2010. Published in: Bulletin of the American Physical Society, Vol.55 (No.16). p. 348.

Walmsley, Nigel, 1958- (1986) The numerical representation of pump-turbine performance characteristics. PhD thesis, University of Warwick.

Walters, Peter, 1943-. (2003) Erratum : A necessary and sufficient condition for a two-sided continuous function to be cohomologous to a one-sided continuous function (vol 18, pg 131, 2003). Dynamical Systems, Vol.18 (No.3). pp. 271-278. ISSN 1468-9367

Walters, Peter, 1943-. (2003) A necessary and sufficient condition for a two-sided continuous function to be cohomologous to a one-sided continuous function. Dynamical Systems, Vol.18 (No.2). pp. 131-138. ISSN 1468-9367

Wang, J., Eames, P. C., Zhao, J. F., Hyde, T. and Fang, Y.. (2007) Stresses in vacuum glazing fabricated at low temperature. Solar Energy Materials and Solar Cells, Vol.91 (No.4). pp. 290-303. ISSN 0927-0248

Wang, Jihong, Luo, Xing, Yang, Li, Shpanin, Leonid M., Jia, Nan, Mangan, Stephen and Derby, James W.. (2011) Mathematical modeling study of scroll air motors and energy efficiency analysis - part II. IEEE/ASME Transactions on Mechatronics, Vol.16 (No.1). pp. 122-132. ISSN 1083-4435

Wang, Jihong, Yang, Li, Luo, Xing, Mangan, Stephen and Derby, James W.. (2011) Mathematical modeling study of scroll air motors and energy efficiency analysis - part I. IEEE/ASME Transactions on Mechatronics, Vol.16 (No.1). pp. 112-121. ISSN 1083-4435

Wang, L. W., Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E. and Wang, R. Z.. (2010) Anisotropic thermal conductivity and permeability of compacted expanded natural graphite. Applied Thermal Engineering, Vol.30 (No.13). pp. 1805-1811. ISSN 1359-4311

Wang, Y. D., McIlveen-Wright, D., Huang, Y., Hewitt, N., Eames, P. C., Rezvani, S., McMullan, J. and Roskilly, A. P.. (2007) The application of FLOX/COSTAIR technologies to reduce NOx emissions from coal/biomass fired power plant: a technical assessment based on computational simulation. Fuel, Vol.86 (No.14). pp. 2101-2108. ISSN 0016-2361

Wang, Youyu, Liu, Haitao, Huang, Tian and Chetwynd, Derek G.. (2009) Stiffness modeling of the Tricept robot using the overall Jacobian matrix. Journal of Mechanisms and Robotics, Vol.1 (No.2). 021002. ISSN 19424302

Weager, Brendon M., Bishop, G. R., Black, A. C., Reynolds, N., Pharaoh, M. W., Smith, G. F., Rowe, J., Riley, D. E., Birrell, M. and Donaldson, P.. (2007) Development of recyclable self-reinforced polypropylene parts for automotive applications. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 44 (3-4). pp. 293-310. ISSN 0143-3369

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. ISSN 0950-3293

Wen, Huii-I, Zhang, Shu-jun, Hapeshi, Kevin and Wang, Xiao-feng. (2008) An innovative methodology of product design from nature. Journal of Bionic Engineering, Vol.5 (No.1). pp. 75-84. ISSN 1672-6529

Whittle, J. K., Williams, M. S., Karavasilis, Theodore L. and Blakeborough, A. (Anthony). (2012) A comparison of viscous damper placement methods for improving seismic building design. Journal of Earthquake Engineering, Vol.16 (No.4). pp. 540-560. ISSN 1363-2469

Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.

Wong, I. L., Eames, P. C. and Perera, R. S. (2007) A review of transparent insulation systems and the evaluation of payback period for building applications. In: CISBAT International Conference on Solar Energy Applications to Buildings, Swiss Fed Inst Technol, Lausanne, SWITZERLAND, 2005. Published in: SOLAR ENERGY, 81 (9 Sp. Iss. SI). pp. 1058-1071.

Wood, Benjamin M., Coles, Stuart R., Kirwan, Kerry and Maggs, S. J.. (2010) Biocomposites : evaluating the potential compatibility of natural fibers and resins for new applications. Journal of Advanced Materials, Vol.42 (No.2). pp. 5-16. ISSN 1070-9789

Wood, D. A. (David A.) (2006) Making better springs using aspects of chaos theory. In: Conference on Bifurcations - The Use and Control of Chaos, University of Southampton, Southampton, England, July 28th - 30th, 2003. Published in: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol.220 (No.3). pp. 253-259.

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.), Beaumont, R., Rusinek, A., Mayer, U. and Pearce, A. (2009) A method to calibrate a specimen with strain gauges to measure force over the full-force range in high rate testing. In: 9th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Royal Mil Acad, Brussels, Belgium, September 07-11, 2009. Published in: DYMAT 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading Volume 1, 1 pp. 265-273.

Wood, P. K. C., Schley, C. A., Williams, M. A. (Mark A.) and Rusinek, A.. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials & Design, Vol.32 (No.4). pp. 2246-2259. ISSN 0264-1275

Wu, C-Y, Fan, X. F., Motazedian, F., Seville, J. P. K. (Jonathan P. K.), Parker, D. J. and Cocks, A. C. F.. (2010) Quantitative investigation of powder flow during die filling using positron emission particle tracking. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol.224 (No.3). pp. 169-175. ISSN 0954-4089

Wu, Feng, Zhang, Xiao-Ping, Godfrey, Keith and Ju, Ping (2006) Modeling and control of wind turbine with doubly fed induction generator. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 1404-1409.

Wu, Yupeng, Eames, Philip, Smyth, Mervyn and Mallick, Tapas (2007) Optical and thermal analysis of different asymmetric compound parabolic photovoltaic concentrators (ACPPVC) systems for building integration. In: Solar World Congress of the International-Solar-Energy-Society, Beijing, PEOPLES R CHINA, SEP 18-21, 2007. Published in: PROCEEDINGS OF ISES SOLAR WORLD CONGRESS 2007: SOLAR ENERGY AND HUMAN SETTLEMENT, VOLS I-V pp. 1440-1444.

Wu, Z. G. and Zhao, Chang-Ying. (2011) Experimental investigations of porous materials in high temperature thermal energy storage systems. Solar Energy, Vol.85 (No.7). pp. 1371-1380. ISSN 0038-092X

Xue, B., Lu, Dawei and Bei, C. (1987) Compensatory control of cylindricity in ultra precision grinding. In: 6th International Conference on Production Engineering, Osaka, Japan, 1987 pp. 340-395. (Unpublished)

Yang, Raymond H., Teo, Chek Sing, Buice, Eric S., Liu, Xianping, Wang, Weili and Smith, Stuart T. (2008) Control strategies for a dynamic positioning machine at nanometer level. In: 23rd ASPE Annual Meeting (American Society for Precision Engineering), Portland, Oregon, U.S.A., Oct 19-24, 2008. Published in: Proceedings of the 23rd ASPE Annual Meeting

Yang, Shaoyong, Bryant, Angus T., Mawby, P. A. (Philip A.), Xiang, Dawei, Ran, Li and Tavner, Peter (2009) An industry-based survey of reliability in power electronic converters. In: IEEE Energy Conversion Congress and Exposition, San Jose, CA, SEP 20-24, 2009. Published in: 2009 IEEE Energy Conversion Congress and Exposition, Vols. 1-6 pp. 2612-2618.

Yiu, H. H. P. and Liu, Kuo-Kang (2010) Mechanical and magnetic stimulation on cells for bone regeneration. In: Öchsner, A. and Ahmed, W., (eds.) Biomechanics of Hard Tissues. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, pp. 193-207. ISBN 9783527324316

Yoshimoto, Takahiro, Vlaskamp, Jozef H. A., Brend, M. A., Thomas, P. J. (Peter J.), Murai, Yuichi and Takeda, Yasushi (2008) Twisted wake of a sphere in rotating fluid. In: 61st Annual Meeting of the APS Division of Fluid Dynamics, San Antonio, TX, U.S.A., Nov 23-25, 2008. Published in: Bulletin of the American Physical Society, Vol.53 (No.15). pp. 124-125.

Young, Ken (2007) Viewpoint. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 34 (5). p. 357. ISSN 0143-991X

Young, Ken and Thersley, I. (2006) UK robotic installations statistics for 2005. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, 33 (6). pp. 418-421. ISSN 0143-991X

Yue, Zhaoyang, Liu, Xianping, Cai, Z. and Cai, P. (2008) A multi-function tribological probe microscope with a hot tip for thermal measurement. In: Fifth International Symposium on Instrumentation Science and Technology, Shenyang, China, Sep 15-18, 2008. Published in: Proceedings of the Fifth International Symposium on Instrumentation Science and Technology, Vol.7133 Article: 71334L.

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Zhang, D., Chetwynd, D. G. (Derek G.), 1948-, Liu, X. and Tian, Yanling. (2006) Investigation of a 3-DOF micro-positioning table for surface grinding. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 48 (12). pp. 1401-1408. ISSN 0020-7403

Zhang, Guan H. and Zhao, Chang-Ying. (2011) Thermal and rheological properties of microencapsulated phase change materials. Renewable Energy, Vol.36 (No.11). pp. 2959-2966. ISSN 0960-1481

Zhang, Hu and Liu, Kuo-Kang. (2008) Optical tweezers for single cells. Journal of The Royal Society Interface, Vol.5 (No.24). pp. 671-690. ISSN 1742-5689

Zhang, X. -P., Rehtanz, C. and Song, Y.. (2006) A grid for tomorrow. POWER ENGINEER, 20 (5). pp. 22-27. ISSN 1479-8344

Zhang, X. -P., Yao, L., Chong, B., Sasse, C. and Godfrey, K. R. (2005) FACTS and HVDC technologies for the development of future power systems. In: International Conference on Future Power Systems, Amsterdam, NETHERLANDS, NOV 16-18, 2005. Published in: 2005 International Conference on Future Power Systems (FPS) pp. 109-114.

Zhang, Xiao-Ping (2006) Continuation power flow in distribution system analysis. In: IEEE/PES Power Systems Conference and Exposition, Atlanta, GA, OCT 29-NOV 01, 2006. Published in: 2006 IEEE/PES Power Systems Conference and Exposition. Vols 1-5 pp. 613-617.

Zhang, Yuning and Li, Shengcai. (2010) Notes on radial oscillations of gas bubbles in liquids : thermal effects. The Journal of the Acoustical Society of America, Vol.128 (No.5). EL306-EL309 . ISSN 00014966

Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.

Zhao, Chang-Ying, Dai, L. N., Tang, G. H., Qu, Z. G. and Li, Z. Y.. (2010) Numerical study of natural convection in porous media (metals) using Lattice Boltzmann Method (LBM). International Journal of Heat and Fluid Flow, Vol.31 (No.5). pp. 925-934. ISSN 0142-727X

Zhao, Chang-Ying, Lu, Wei and Tassou, S. A. (2009) Flow boiling heat transfer in horizontal metal-foam tubes. Journal of Heat Transfer, Vol.131 (No.12). Article: 121002. ISSN 0022-1481

Zhao, Chang-Ying, Lu, Wei and Tian, Yuan. (2010) Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs). Solar Energy, Vol.84 (No.8). pp. 1402-1412. ISSN 0038-092X

Zhao, Chang-Ying, Tassou, S. A and Lu, T. J. (Tianjian). (2008) Analytical considerations of thermal radiation in cellular metal foams with open cells. International Journal of Heat and Mass Transfer, Vol.51 (No.3-4). pp. 929-940. ISSN 0017-9310

Zhao, Chang-Ying and Zhang, Guan H.. (2011) Review on microencapsulated phase change materials (MEPCMs) : fabrication, characterization and applications. Renewable and Sustainable Energy Reviews, Vol.15 (No.8). pp. 3813-3832. ISSN 13640321

Zhao, Jun Fu, Eames, Philip C., Hyde, Trevor J., Fang, Yueping and Wang, Jinlei (2007) A modified pump-out technique used for fabrication of low temperature metal sealed vacuum glazing. In: CISBAT International Conference on Solar Energy Applications to Buildings, Swiss Fed Inst Technol, Lausanne, SWITZERLAND, 2005. Published in: SOLAR ENERGY, 81 (9 Sp. Iss. SI). pp. 1072-1077.

Zhong, Y., Critoph, Robert E. and Thorpe, Roger. (2006) Evaluation of the performance of solid sorption refrigeration systems using carbon dioxide as refrigerant. Applied Thermal Engineering, Vol.26 (No.16). pp. 1807-1811. ISSN 1359-4311

Zhong, Y., Critoph, Robert E., Thorpe, Roger, Tamainot-Telto, Z. and Aristov, Yu. I.. (2007) Isothermal sorption characteristics of the BaCl2-NH3 pair in a vermiculite host matrix. Applied Thermal Engineering, Vol.27 (No.14-15). pp. 2455-2462. ISSN 1359-4311

Zhou, Dan and Zhao, Chang-Ying (2009) Solid/liquid phase change heat transfer in latent heat thermal energy storage. In: 3rd International Conference on Energy Sustainability, San Francisco, CA, U.S.A., JUL 19-23, 2009. Published in: ES2009: Proceedings of the ASME 3rd International Conference on Energy Sustainability, Vol.2 pp. 863-869.

Zoueshtiagh, F., Thomas, P. J. (Peter J.), Thomy, V. and Merlen, A.. (2008) Micrometric granular ripple patterns in a capillary tube. Physical Review Letters, Vol.100 (No.5). Article 054501. ISSN 0031-9007

Zuo , Zhi-gang, Li, Shengcai, Liu, Shu-hong, Li, Shuang and Chen, Hui. (2009) An attribution of cavitation resonance : volumetric oscillations of cloud. Journal of Hydrodynamics, Vol.21 (No.2). pp. 152-158. ISSN 1001-6058