A

Abulrub, Abdul-Hadi G., Sahinkaya, M. Necip and Burrows, Clifford R. (2010) An adaptive weighting control strategy to avoid magnetic bearing contact. In: ASME 2009 Dynamic Systems Control Conference (DSCC 2009)/Bath/ASME Symposium on Fluid Power and Motion Control, Hollywood, CA, October 12-14, 2009. Published in: ASME 2009 Dynamic Systems and Control Conference, Vol.1 pp. 741-747.

Alsemgeest, Raimond W. (2004) The time-dependent flow through throttle valves: a computational and experimental investigation. PhD thesis, University of Warwick.

Antory, David (2006) Fault diagnosis application in an automotive diesel engine using auto-associative neural networks. In: International Conference on Computational Intelligence for Modelling, Control and Automation/International Conference on Intelligent Agents Web Technologies and International Commerce, Vienna, AUSTRIA, NOV 28-30, 2005. Published in: International Conference on Computational Intelligence for Modelling, Control & Automation Jointly with International Conference on Intelligent Agents, Web Technologies & Internet Commerce, Vol 2, Proceedings pp. 109-116.

Attridge, Alex, Pitts, Matthew and Williams, M. A. (Mark A.) (2008) A human-centred approach to the design and evaluation of automotive seat adjustment controls. In: 6th International Design and Emotion Conference - Dare to Desire, School of Design, Hong Kong Polytechnic University, Hong Kong, China, Oct 6-9, 2008. Published in: Proceedings of the 6th International Design and Emotion Conference

Attridge, Alex, Williams, M. A. (Mark A.) and Tennant, Charles. (2007) The role of physical modelling in the design verification stage of the automotive NPI process in the premium sector. International Journal of Automotive Technology and Management, 7 (1). pp. 32-54. ISSN 1470-9511

Attridge, Alex, Williams, M. A. (Mark A.), Wellings, Tom and Pitts, Matthew (2008) Developing the next generation of automotive human machine interface (HMI). In: Warwick Innovative Manufacturing Research Centre (WIMRC) Annual Conference, Warwick Manufacturing Group (WMG), The University of Warwick, Coventry, 2008 (Unpublished)

B

Barker, H. A., Tan, A. H. and Godfrey, K. R.. (2007) Ternary input signal design for system identification. IET Control Theory and Applications, Vol.1 (No.5). pp. 1224-1233. ISSN 1751-8644

Bates, D. (Daniel), Smith, G. F., Lu, Dawei and Hewitt, J. (2000) Rapid NDT of composite aircraft components using lock-in ultrasonic and halogen lamp thermography. In: Proceedings of SPIE Non-destructive Evaluation , Newport Beach, California, 5th-9th March 1999. Published in: Nondestructive Evaluation of Aging Materials and Composites IV (Proceedings Volume), Vol.3993

Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2011) Modelling of 4WD vehicle driveability during tip-in/tip-out events. In: 22nd International Symposium on Dynamics of Vehicle on Road and Tracks (IAVSD), Manchester Metropolitan University, Manchester, UK, 14-19 Aug 2011. Published in: Proceedings of the 22nd IAVSD Symposium (No.85).

Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2012) Shuffle frequency migration of 4WD vehicle. In: Regional Conference on Automotive Research, Kuala Lumpur, Malaysia, 14-15 Dec 2011 (No.P023).

Birrell, Stewart A and Young, Mark S.. (2011) The impact of smart driving aids on driving performance and driver distraction. Transportation Research Part F : Traffic Psychology and Behaviour, Vol.14 (No.6). pp. 484-493. ISSN 1369-8478

Birrell, Stewart A., Young, Mark S., Jenkins, Daniel P. and Stanton, Neville, 1960-. (2012) Cognitive work analysis for safe and efficient driving. Theoretical Issues in Ergonomics Science, Vol.13 (No.4). pp. 430-449. ISSN 1463-922X

Birrell, Stewart A., Young, Mark S. and Weldon, Alex M.. (2013) Vibrotactile pedals : provision of haptic feedback to support economical driving. Ergonomics, Vol.56 (No.2). pp. 282-292. ISSN 0014-0139

Blundell, Dominic, Edwards, Gavin, Foster, Philip, Keung, Helene Lim Choi and Sindhu, Abdullah (2005) Tracking and automating the defective component process in the automotive industry. In: 9th World Multi-Conference on Systemics, Cybernetics and Informatics, Orlando, FL, JUL 10-13, 2005. Published in: WMSCI 2005: 9th World Multi-Conference on Systemics, Cybernetics and Informatics, Vol 8 pp. 303-308.

Butcher, Kent (2012) Concurrent engineering approach to complete non-linear FEA of an aircraft wheel's lock-ring. PhD thesis, University of Warwick.

C

Chacko, Salvio (2012) Numerical analysis of unsteady heat transfer for thermal management. PhD thesis, University of Warwick.

Cheng, C., McGordon, Andrew, Jones, R. Peter and Jennings, P. A.. (2012) Development of a comprehensive and flexible forward dynamic powertrain simulation tool for various hybrid electric vehicle architectures. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.226 (No.3). pp. 385-398. ISSN 0954-4070

Cheng, Caizhen and Cebon, David. (2008) Improving roll stability of articulated heavy vehicles using active semi-trailer steering. Vehicle System Dynamics, Vol.46 (Suppl.1). pp. 373-388. ISSN 0042-3114

Cheng, Caizhen and Cebon, David. (2011) Parameter and state estimation for articulated heavy vehicles. Vehicle System Dynamics, Vol.49 (No.1-2). pp. 399-418. ISSN 0042-3114

Cheng, Caizhen, McGordon, Andrew, Jones, R. Peter and Jennings, P. A. (2010) Comprehensive forward dynamic HEV powertrain modelling using dymola and MATLAB/Simulink. In: 6th IFAC Symposium "Advances in Automotive Control", Munich, Germany, Jul 12-14, 2010. Published in: Proceedings of the 6th IFAC Symposium "Advances in Automotive Control" pp. 536-541.

Cheng, Caizhen, Roebuck, Richard, Odhams, Andrew and Cebon, David. (2011) High-speed optimal steering of a tractor–semitrailer. Vehicle System Dynamics, Vol.49 (No.4). pp. 561-593. ISSN 0042-3114

Cherry, Ann Susan, 1964- (1992) An investigation of multibody system modelling and control analysis techniques for the development of advanced suspension systems in passenger cars. PhD thesis, University of Warwick.

Cheung, A. H. W. , Lu, Dawei and Ip, W. H. (2005) An intelligent model for aircraft maintenance services. In: International Fuzzy Systems Association World Congress , Beijing, China, July 28th-31st (Unpublished)

Cheung, Angus, Ip, W. H. , Lu, Dawei and Lai, C. L.. (2005) An aircraft service scheduling model using genetic algorithms. Journal of Manufacturing Technology Management, Vol.16 (No.1). pp. 109-119. ISSN 1741-038X

Cheung, Angus, Ip, W.-H. and Lu, Dawei. (2005) Expert system for aircraft maintenance services industry. Journal of Quality in Maintenance Engineering, Vol.11 (No.4). pp. 348-358. ISSN 1355-2511

Cheung, H. W. and Lu, Dawei (2002) Integrated management decision support system for aircraft maintenance services industry. In: 3rd International Conference on Quality and Reliability ICQR 2002, Melbourne, Australia, 28th-30th August. Published in: Proceedings of the 3rd International Conference on Quality and Reliability (ICQR)

Chu, T. W. and Jones, P. (Peter), Dr.. (2008) Analysis and simulation of nonlinear handling characteristics of automotive vehicles with focus on lateral load transfer. Vehicle System Dynamics, Vol.46 (Suppl.S1). pp. 17-31. ISSN 0042-3114

Chung, Yongmann M., Sung, Hyung Jin and Krogstad, P.-A.. (2002) Modulation of near-wall turbulence structure with wall blowing and suction. AIAA JOURNAL, 40 (8). pp. 1529-1535. ISSN 0001-1452

Chung, Yongmann M. and Talha, Tariq. (2011) Effectiveness of active flow control for turbulent skin friction drag reduction. Physics of Fluids, Vol.23 (No.2). 025102. ISSN 10706631

Coburn, W., Kretschmar, P., Kreykenbohm, I., McBride, V. A., Rothschild, R. E., Staubert, R. and Wilins, J.. (2006) Cyclotron features in X-ray spectra of accreting pulsars. ADVANCES IN SPACE RESEARCH, 38 (12). pp. 2747-2751. ISSN 0273-1177

Cooper, A. J. and Peake, N.. (2005) Upstream-radiated rotor–stator interaction noise in mean swirling flow. Journal of Fluid Mechanics, Vol.52 . pp. 219-250. ISSN 0022-1120

Critoph, Robert E., Metcalf, Steven John and Tamainot-Telto, Zacharie. (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. ISSN 0145-7632

D

De Matos, Paula Alexandra Leal (1998) The development of decision support models for European air traffic flow management. PhD thesis, University of Warwick.

Douce, J. L.. (2006) Improving frequency-response estimates by reduction of end effects. IEE Proceedings - Control Theory and Applications, Vol.153 (No.2). pp. 247-250. ISSN 1350-2379

Douce, J. L., Widanage, W. D. and Godfrey, K. R.. (2007) Evaluation of the relationship between gain and phase using extrapolation techniques. IET Control Theory and Applications, Vol.1 (No.4). pp. 1122-1130. ISSN 1751-8644

Dunne, Gerard T. (2003) The introduction of a Sound Quality Engineering Process to Jaguar Cars : executive summary. PhD thesis, University of Warwick.

E

Eastwood, Simon, Tucker, Paul, Xia, Hao, Dunkley, Paul and Carpenter, P. W. (Peter William), 1942- (2010) Large-eddy simulations and measurements of a small-scale high-speed coflowing jet. In: AIAA/CEAS 14th Aeroacoustics Conference, Vancouver, Canada, May 05-JUL 05, 2008. Published in: AIAA Journal, Vol.48 (No.5). pp. 963-974.

G

Gardner, J. W., Apostolidou, A., Cole, M., Dowson, Christopher G., Edmunds, S. and Sehra, G. (2007) Towards a low-cost optical iriosensor system for biomedical immunoassay applications. In: 5th IASTED International Conference on Biomedical Engineering, Innsbruck, AUSTRIA, FEB 14-16, 2007. Published in: Proceedings of the Fifth IASTED International Conference on Biomedical Engineering pp. 277-282.

Giudice, Sebastiano D. (2009) Sound quality evaluations using interactive simulation : innovation report. EngD thesis, University of Warwick.

Goodship, V. (2002) What to do with plastics at end-of-life. In: Tucker, Nick and Lindsey, Kevin, (eds.) An introduction to automotive composites. Shrewsbury: RAPRA Technology. ISBN 1859572790

Graham, Neil Anthony, 1947- (1974) Airborne noise reduction of agricultural tractor cabs. PhD thesis, University of Warwick.

Graysmith, J. L. (1995) Using CFD in engine design. PhD thesis, University of Warwick.

Guo, Yue, Rao, Arun Chakrapani and Jones, R. Peter (2008) Architectural and Functional Modelling of an Automotive Driver Information System Using SysML. In: IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, Beijing, China, Oct 12-15, 2008. Published in: Proceedings of the 2008 IEEE/ASME international Conference on Mechatronic and Embedded Systems and Applications pp. 552-557.

Guo, Yue, 1983- (2009) An investigation of model-based techniques for automotive electronic system development. PhD thesis, University of Warwick.

H

Hajarnavis, Vivek and Young, Ken. (2008) An Assessment of PLC Software Structure Suitability for the Support of Flexible Manufacturing Processes. IEEE Transactions on Automation Science and Engineering, Vol.5 (No.4). pp. 641-650. ISSN 1545-5955

Hajarnavis, Vivek and Young, Ken. (2008) An investigation into programmable logic controller software design techniques in the automotive industry. Assembly Automation, Vol.28 (No.1). pp. 43-54. ISSN 0144-5154

Hall, Wayne, 1974- (2003) Finite element modelling and simulation for a 'smart' tyre. PhD thesis, University of Warwick.

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, M.. (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. ISSN 0924-0136

Han, Li, Thornton, Martin and Shergold, M.. (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. ISSN 0264-1275

Harrison, Mark, 1949- (2001) The Soviet market for inventions: the case of jet propulsion, 1932 to 1944. Working Paper. Coventry: University of Warwick, Department of Economics. (Warwick economic research papers.

Hawley, Carol, Galbraith, N. D. and Souza, V. A. de. (2008) Medical education on fitness to drive : a survey of all UK medical schools. Postgraduate Medical Journal, Vol.84 (No.998). pp. 635-638. ISSN 0032-5473

Hazra, S. (Sumit), Williams, D., Roy, R., Aylmore, R., Allen, M. and Hollingdale, D. (2011) Predicting the occurrence of cosmetic defects in automotive skin panels. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 253-257.

Higgins, Matthew D., Green, Roger, 1951- and Leeson, Mark S., 1963-. (2012) Optical wireless for intravehicle communications : a channel viability analysis. IEEE Transactions on Vehicular Technology, Vol.61 (No.1). pp. 123-129. ISSN 0018-9545

Hinrichsen, Diederich and Pritchard, Anthony J.. (2008) Composite Systems with Uncertain Couplings of Fixed Structure: Scaled Riccati Equations and the Problem of Quadratic Stability. SIAM Journal on Control and Optimization, Vol.47 (No.6). pp. 3037-3075. ISSN 0363-0129

Howell, Richard M., Lucey, Anthony D. and Carpenter, P. W. (Peter William), 1942- (2007) Instability of a cantilevered flexible plate in inviscid channel flow. In: 6th Symposium on Fluid-Structure Interactions, Aeroelasticity and Flow-Induced Vibration and Noise, Vancouver, CANADA, JUL 23-27, 2006. Published in: PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE VOL 9 pp. 769-776.

Huang, Yingping, McMurran, Ross, Amor-Segan, Mark, Dhadyalla, Gunwant, Jones, R. Peter, Bennett, Peter, Mouzakitis, Alexandros and Kieloch, Jan. (2010) Development of an automated testing system for vehicle infotainment system. International Journal of Advanced Manufacturing Technology, Vol.51 (No.1-4). pp. 233-246. ISSN 0268-3768

J

Jewkes, James, 1978- (2008) An improved turbulent boundary layer inflow condition, applied to the simulation of jets in cross-flow. PhD thesis, University of Warwick.

K

Karow, Michael, Hinrichsen, Diederich and Pritchard, Anthony J.. (2006) Interconnected systems with uncertain couplings: Explicit formulae for mu-values, spectral value sets, and stability radii. SIAM JOURNAL ON CONTROL AND OPTIMIZATION, 45 (3). pp. 856-884. ISSN 0363-0129

Karow, Michael, Hinrichsen, Diederich and Pritchard, Anthony J. (2006) Stability radii and spectral value sets for generalized Gershgorin perturbations. In: 45th IEEE Conference on Decision and Control, San Diego, CA, DEC 13-15, 2006. Published in: PROCEEDINGS OF THE 45TH IEEE CONFERENCE ON DECISION AND CONTROL, VOLS 1-14 pp. 5760-5765.

Kiran, Amit (2008) Jet noise : aeroacoustic distribution of a subsonic co-axial jet. PhD thesis, University of Warwick.

Kirwan, Kerry (2002) Alternative glazing for automotive vehicles: executive summary. EngD thesis, University of Warwick.

Kirwan, Kerry and Wood, Benjamin M. (2012) Recycling of materials in automotive engineering. In: Rowe, J., (ed.) Advanced materials in automotive engineering. Cambridge, U.K.: Woodhead Publishing Ltd., pp. 299-313. ISBN 9781845695613

Koerner, Stephen, 1952- (1995) The British motor cycle industry, 1935-1975. PhD thesis, University of Warwick.

Kudar, Karen L. and Carpenter, P. W. (Peter William), 1942- (2008) Numerical investigation of a micro-valve pulsed-jet actuator. In: IUTAM Symposium on Flow Control and MEMS, Royal Geog Soc, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 pp. 45-51.

L

Lemmens, Bas (2006) Nonlinear perron-probenius theory and dynamics of cone maps. In: 2nd Multidisciplinary International Symposium on Positive Systems (POSTA 2006), Grenoble, FRANCE, AUG 30-SEP 01, 2006. Published in: POSITIVE SYSTEMS, PROCEEDINGS, 341 pp. 399-406.

Leverton, Timothy A. (1998) The use of concurrent engineering methodologies : achieving world class product development performance in the automobile industry : executive summary. EngD thesis, University of Warwick.

Li, Dezhi, Han, Li, Thornton, M. and Shergold, M.. (2012) Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints. Materials Science and Engineering: A, Vol.558 . pp. 242-252. ISSN 09215093

Lockerby, Duncan (2001) Numerical simulation of boundary-layer control using MEMS actuation. PhD thesis, University of Warwick.

Lockerby, Duncan A., Carpenter, P. W. (Peter William), 1942- and Davies, Christopher (2008) Is Helmholtz resonance a problem for micro-jet actuators? In: IUTAM Symposium on Flow Control and MEMS, Royal Geographical Society, London, England, Sep 19-22, 2006. Published in: IUTAM Bookseries, Vol.7 (Part 2). pp. 95-101.

M

McBride, V. A., Coburn, W., Coe, M. J., Kretschmar, P., Kreykenbohm, I., Rothschild, R. E., Staubert, R. and Wilms, J.. (2006) Phase resolved study of the CRSF in MX 0656-072. ADVANCES IN SPACE RESEARCH, 38 (12). pp. 2768-2770. ISSN 0273-1177

McGordon, Andrew, Poxon, John E. W., Cheng, Caizhen, Jones, R. Peter and Jennings, P. A.. (2011) Development of a driver model to study the effects of real-world driver behaviour on the fuel consumption. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, Vol.225 (No.11). pp. 1518-1530. ISSN 0954-4070

Monteiro, Luis António Domingos Fernandes (1998) The strategic use of information in the airline industry. PhD thesis, University of Warwick.

Muetze, Annette and Binder, Andreas. (2007) Calculation of circulating bearing currents in machines of inverter-based drive systems. IEEE Transactions on Industrial Electronics, Vol.54 (No.2). pp. 932-938. ISSN 0278-0046

Muetze, Annette and Binder, Andreas. (2007) Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC motors up to 500 kW. IEEE Transactions on Industrial Electronics, Vol.54 (No.3). pp. 1614-1622. ISSN 0278-0046

N

Nakariakov, Valery M.. (2007) MHD oscillations in solar and stellar coronae: Current results and perspectives. ADVANCES IN SPACE RESEARCH, 39 (12). pp. 1804-1813. ISSN 0273-1177

O

O'Connell, Sean (1995) The social and cultural impact of the car in interwar Britain. PhD thesis, University of Warwick.

Oliveira, Alessandro V. M. (2004) Three essays on competition in airline markets with recent liberalisation. PhD thesis, University of Warwick.

Oliveira, Alessandro V. M. (2003) The impacts of liberalisation on a Brazilian air shuttle market. Working Paper. Coventry: University of Warwick, Department of Economics. (Warwick economic research papers.

P

Patterson, Fiona D. (2002) Project risk management and its application into the automotive manufacturing industry: executive summary. EngD thesis, University of Warwick.

Pearson, Ian T. and Mottram, J. Toby (James Toby), 1958-. (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 1, Evaluation of key parameters. Computers & Structures, Vol.90-91 . pp. 76-88. ISSN 0045-7949

Pearson, Ian T. and Mottram, J. Toby (James Toby), 1958-. (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 2, Novel shell mesh to minimise analysis time. Computers & Structures, Vol.90-91 . pp. 89-96. ISSN 0045-7949

Pitts, Matthew, Burnett, Gary, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.). (2012) Visual–haptic feedback interaction in automotive touchscreens. Displays, Vol.33 (No.1). pp. 7-16. ISSN 0141-9382

Pitts, Matthew, Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.). (2012) Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012 . Article number 598739. ISSN 1687-5893

Pitts, Matthew and Williams, M. A. (Mark A.) (2008) Diagnosis and resolution of a customer-defined satisfaction issue in automotive user controls. In: 6th International Design and Emotion Conference - Dare to Desire, School of Design, Hong Kong Polytechnic University, Hong Kong, China, Oct 6-9, 2008. Published in: Proceedings of the 6th International Design and Emotion Conference

Pottschmidt, K., Wilms, J., Nowak, M. A., Larsson, S., Zdziarski, A. A. and Pooley, G. G.. (2006) INTEGRAL and RXTE power spectra of Cygnus X-1. ADVANCES IN SPACE RESEARCH, 38 (7). pp. 1350-1353. ISSN 0273-1177

Poxon, John E. W. (2009) Development and use of a hybrid electric vehicle (HEV) model for interactive customer assessment of sound quality : innovation report. EngD thesis, University of Warwick.

Q

Quigley, Christopher Patrick (2011) Design of in-vehicle networked control system architectures through the use of new design to cost and weight processes : innovation report. EngD thesis, University of Warwick.

R

Rajendren, K.. (2011) Opportunities for in-mould painting at TVS Motor Company Ltd. Progress in Rubber Plastics and Recycling Technology, Volume 27 (Number 2). pp. 107-132. ISSN 1477-7606

Rao, Arun Chakrapani, Dhadyalla, Gunwant, Jones, R. Peter, McMurran, Ross and White, David (2006) Systems modelling of a driver information system - Automotive industry case study. In: IEEE/SMC International Conference on System of Systems Engineering, Los Angeles, CA, APR 24-26, 2006. Published in: Proceedings of the 2006 IEEE/SMC International Conference on System of Systems Engineering pp. 240-245.

Redding, Stephen, Sturm, Daniel M. and Wolf, Nikolaus, 1973- (2007) History and industry location: evidence from German airports. Working Paper. Coventry: University of Warwick. Centre for the Study of Globalisation and Regionalisation. (Working papers (University of Warwick. Centre for the Study of Globalisation and Regionalisation).

Riggs, Ian (2004) Supplier selection using performance self assessment reporting in the automotive industry : executive summary. EngD thesis, University of Warwick.

Roy, R., Evans, R., Lowe, M. J. and Williams, D.. (2011) Addressing the impact of high levels of product variety on complexity in design and manufacture. Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture, Vol.225 (No.10). pp. 1939-1950. ISSN 0954-4054

S

Schoukens, J., Widanage, W. D., Godfrey, K. R. and Pintelon, R.. (2007) Initial estimates for the dynamics of a Hammerstein system. Automatica, Vol.43 (No.7). pp. 1296-1301. ISSN 0005-1098

Shankar, R. (Ravi), Marco, James and Assadian, Francis. (2012) The novel application of optimization and charge blended energy management control for component downsizing within a plug-in hybrid electric vehicle. Energies, Vol.5 (No.12). pp. 4892-4923. ISSN 1996-1073

Shankar, R. (Ravi), Marco, James and Assadian, Francis. (2012) The novel application of optimization and charge blended energy management control for component downsizing within a plug-in hybrid electric vehicle. Energies, Volume 5 (Number 12). pp. 4892-4923. ISSN 1996-1073

Starschich, Ewgenij, Muetze, Annette and Hameyer, Kay (2009) Analytical force calculation in brushless-DC motors I: an alternative approach. In: IEEE International Electric Machines and Drives Conference (IEMDC 2009), Miami, FL, May 03-06, 2009. Published in: 2009 IEEE International Electric Machines & Drives Conference, Vols. 1-3 pp. 1194-1201.

Starschich, Ewgenij, Muetze, Annette and Hameyer, Kay (2009) Analytical force calculation in brushless-DC motors II: mathematical details of the alternative approach. In: IEEE International Electric Machines and Drives Conference (IEMDC 2009), Miami, FL, May 03-06, 2009. Published in: 2009 IEEE International Electric Machines & Drives Conference, Vols. 1-3 pp. 1202-1209.

Suwatthikul, Jittiwut (2008) A framework and methods for on-board network level fault diagnostics in automobiles. PhD thesis, University of Warwick.

T

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Turley, G. A., Williams, M. A. (Mark A.) and Tennant, Charles. (2007) Final vehicle product audit methodologies within the automotive industry. International Journal of Productivity and Quality Management, 2 (1). pp. 1-22. ISSN 1746-6482

V

Verhaeghe, Ing G. (2008) Achieving aerospace standard porosity levels when welding thin and thick-section aluminium using fibre-delivered lasers : executive summary. EngD thesis, University of Warwick.

W

Wang, Haixia and Ceglarek, Dariusz. (2009) Variation propagation modeling and analysis at preliminary design phase of multi-station assembly systems. Assembly Automation, Vol.29 (No.2). pp. 154-166. ISSN 0144-5154

Wang, S., Chen, Y., Ding, M., Feng, Jianfeng, Stein, J. F., Aziz, T. Z. and Liu, X.. (2007) Revealing the dynamic causal interdependence between neural and muscular signals in Parkinsonian tremor. Journal of the Franklin Institute, Vol.344 (No.3-4). pp. 180-195. ISSN 0016-0032

Waylen, Andrea and McKenna, Frank P.. (2008) Risky attitudes towards road use in pre-drivers. Accident Analysis and Prevention, Vol.40 (No.3). pp. 905-911. ISSN 0001-4575

Wellings, Tom, Pitts, Matthew and Williams, M. A. (Mark A.). (2012) Characterising the experience of interaction : an evaluation of automotive rotary dials. Ergonomics, Vol.15 (No.11). pp. 1298-1315. ISSN 0014-0139

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew (2007) The customer, automotive switch-feel, and the New Product Introduction process. In: 7th Pangborn Sensory Science Symposium, Minneapolis, MN, USA, August 12–16, 2007

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, C. (Charles). (2010) Understanding customers' holistic perception of switches in automotive human–machine interfaces. Applied Ergonomics, Vol.41 (No.1). pp. 8-17. ISSN 0003-6870

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Tactility, craftsmanship and the NPI process. SAE International. (SAE Technical Papers.

Whittaker, Lucy M. T. (2001) Modelling and analysis of current and concept vehicles for the purpose of enhancing vehicle handling: executive summary. EngD thesis, University of Warwick.

Williams, M. A. (Mark A.), Attridge, Alex and Pitts, M. (Matthew). (2011) User-centred design and evaluation of automotive seat adjustment controls. International Journal of Vehicle Design, Vol.55 (No.2-4). pp. 119-138. ISSN 0143-3369

Williams, M. A. (Mark A.), Kochhar, A. K. and Tennant, C.. (2007) An object-oriented reference model of the fuzzy front end of the new product introduction process. International Journal of Advanced Manufacturing Technology, Vol.34 (No.7-8). pp. 826-841. ISSN 0268-3768

Wood, Benjamin M. (2011) Overcoming the barriers to sustainable motorsport. EngD thesis, University of Warwick.

Z

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.