Journal Article

UNSPECIFIED (1984) APPLICATION OF TEM EXTENDED ELECTRON-ENERGY LOSS FINE-STRUCTURE TO THE STUDY OF ALUMINUM-OXIDE FILMS. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 49 (3). pp. 341-352.

UNSPECIFIED (2002) All in one microscope measures up. MATERIALS WORLD, 10 (2). pp. 23-24.

UNSPECIFIED (2005) Apparent fracture toughness of Si3N4-based laminates with residual compressive or tensile stresses in surface layers. ACTA MATERIALIA, 53 (2). pp. 289-296. doi:10.1016/j.actamat.2004.09.022

UNSPECIFIED (1989) COMMENTS ON THE ROLE OF RELATIVISTIC CRYSTAL-FIELD EFFECTS WITH APPLICATIONS TO 4F AND 3D ION COMPLEXES. JOURNAL OF THE LESS-COMMON METALS, 148 (1-2). pp. 381-386.

UNSPECIFIED (1987) A COMPARATIVE MUON SPIN RELAXATION (MU-SR) STUDY OF TITANIUM AND YTTRIUM DIHYDRIDES. JOURNAL OF THE LESS-COMMON METALS, 129 . pp. 327-333.

UNSPECIFIED (1984) COMPTON PROFILE ANISOTROPY IN NI3GA. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 50 (6). pp. 703-709.

UNSPECIFIED (1984) CONDUCTION ELECTRON-DENSITY OF STATES AND PROTON SPIN-LATTICE RELAXATION IN THE DIHYDRIDES OF SCANDIUM, YTTRIUM, LANTHANUM AND LUTETIUM. JOURNAL OF THE LESS-COMMON METALS, 104 (1). pp. 79-86.

UNSPECIFIED (2005) Characterisation of thickness and crystallographic texture of sheet using non-contact ultrasonic measurements. IRONMAKING & STEELMAKING, 32 (5). pp. 385-390. doi:10.1179/174328105X71263

UNSPECIFIED (1999) Crystalline properties of strontium barium niobate thin films produced by pulsed-laser deposition. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 79 (11). pp. 2869-2876.

UNSPECIFIED (1992) DIFFUSION CONTROLLED REACTIONS IN AU/PB-SN SOLDER SYSTEM. MATERIALS SCIENCE AND TECHNOLOGY, 8 (9). pp. 817-824.

UNSPECIFIED (1987) DYNAMIC EVIDENCE OF HYDROGEN SUBLATTICE MELTING IN METAL-HYDROGEN SYSTEMS. JOURNAL OF THE LESS-COMMON METALS, 129 . pp. 279-285.

UNSPECIFIED (2001) Decomposition, shrinkage and evolution with temperature of aligned hexagonal ferrite fibres. ACTA MATERIALIA, 49 (20). pp. 4241-4250.

UNSPECIFIED (2005) Detection and depth gauging of transverse cracks in the rail head. IRONMAKING & STEELMAKING, 32 (5). pp. 376-378. doi:10.1179/174328105X67123

UNSPECIFIED (1983) AN ELECTRON-YIELD EXAFS STUDY OF ANODIC-OXIDE AND HYDRATED-OXIDE FILMS ON PURE ALUMINUM. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 48 (5). pp. 665-683.

UNSPECIFIED (1998) Effect of cyclic loading on interfacial shear stress in SiC-CAS glass ceramic matrix composite. MATERIALS SCIENCE AND TECHNOLOGY, 14 (4). pp. 283-286.

UNSPECIFIED (2001) Influences of oxide phases on the coercivity of mechanically alloyed multicomponent Fe-based amorphous alloys. SCRIPTA MATERIALIA, 44 (12). pp. 2729-2734.

UNSPECIFIED (1984) MECHANICAL AND MAGNETIC-PROPERTIES OF PARTIALLY ANNEALED LOW-CARBON MILD-STEEL SHEET. METALS TECHNOLOGY, 11 (SEP). pp. 369-377.

UNSPECIFIED (1982) A MICROSCOPIC STUDY OF ELASTIC-DEFORMATION IN AN OXIDE LAYER ON A PLASTICALLY DEFORMED METAL. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 46 (3). pp. 521-530.

UNSPECIFIED (2005) Melting of stoichiometric and hyperstoichiometric uranium dioxide. JOURNAL OF NUCLEAR MATERIALS, 342 (1-3). pp. 148-163. doi:10.1016/j.nucmat.2005.04.002

UNSPECIFIED (1983) NITROGEN CERAMICS - LIQUID-PHASE SINTERING. POWDER METALLURGY, 26 (2). pp. 73-81.

UNSPECIFIED (1991) NMR-STUDIES OF DIFFUSION ANISOTROPY IN METAL HYDRIDE SINGLE-CRYSTALS. JOURNAL OF THE LESS-COMMON METALS, 172 (Part B). pp. 603-610.

UNSPECIFIED (1982) NUCLEAR MAGNETIC-RESONANCE STUDIES OF HYDROGEN DIFFUSION IN METAL-HYDRIDES. JOURNAL OF THE LESS-COMMON METALS, 88 (2). pp. 323-334.

UNSPECIFIED (1991) NUCLEAR QUADRUPOLAR RELAXATION DUE TO HYDROGEN DIFFUSION IN METAL HYDROGEN SYSTEMS. JOURNAL OF THE LESS-COMMON METALS, 172 (Part B). pp. 572-578.

UNSPECIFIED (1987) NUCLEAR-MAGNETIC-RESONANCE (NMR) STUDIES OF SINGLE-CRYSTAL METAL-HYDROGEN SYSTEMS. JOURNAL OF THE LESS-COMMON METALS, 129 . pp. 345-353.

UNSPECIFIED (1986) NUCLEAR-MAGNETIC-RESONANCE STUDY OF STRUCTURE AND HYDROGEN DIFFUSION IN A SINGLE-CRYSTAL OF BETA-NBH0.76. JOURNAL OF THE LESS-COMMON METALS, 118 (2). pp. 201-215.

UNSPECIFIED (2006) Nosing around. MATERIALS WORLD, 14 (4). pp. 32-33.

UNSPECIFIED (1986) ON THE OCCURRENCE OF MULTIPLY TWINNED PARTICLES IN ELECTRODEPOSITED NICKEL FILMS. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 54 (6). pp. 805-820.

UNSPECIFIED (1996) Oxidation of mineral sulphides by thermophilic microorganisms. MINERALS ENGINEERING, 9 (11). pp. 1119-1125.

UNSPECIFIED (1984) PARAMAGNETIC IMPURITY EFFECTS IN NUCLEAR MAGNETIC-RESONANCE DETERMINATIONS OF HYDROGEN DIFFUSION AND ELECTRONIC-STRUCTURE IN METAL-HYDRIDES - CERIUM IN YH2. JOURNAL OF THE LESS-COMMON METALS, 104 (1). pp. 105-112.

UNSPECIFIED (1992) REACTION PROCESSES BETWEEN SILVER OR ZINC DOPED PB-SN SOLDER AND GOLD. MATERIALS SCIENCE AND TECHNOLOGY, 8 (10). pp. 930-937.

UNSPECIFIED (2002) Residual moisture reduction in coarse coal centrifuges using air purging. Part 3. Commercial scale trials. MINERALS ENGINEERING, 15 (4). pp. 235-243.

UNSPECIFIED (2002) Residual moisture reduction in coarse coal centrifuges. 4. Theory, process engineering and costs. MINERALS ENGINEERING, 15 (4). pp. 245-252.

UNSPECIFIED (1984) A STUDY OF SLIP NUCLEATION IN FE-3.5-PERCENT SI SINGLE-CRYSTALS BY SYNCHROTRON RADIATION TOPOGRAPHY. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 50 (4). pp. 487-504.

UNSPECIFIED (1990) SUPERCONDUCTING FILMS OF YBA2CU3O7-DELTA DEPOSITED USING ND YAG AND XECL LASERS - A COMPARATIVE-STUDY. JOURNAL OF THE LESS-COMMON METALS, 164 (Part A). pp. 391-399.

UNSPECIFIED (1999) Surface finish and lubrication at low cutting speeds. MATERIALS SCIENCE AND TECHNOLOGY, 15 (2). pp. 221-225.

UNSPECIFIED (1983) THERMAL-CONDUCTIVITY OF SOLID UO2 - CRITIQUE AND RECOMMENDATION. JOURNAL OF NUCLEAR MATERIALS, 113 (2-3). pp. 125-132.

UNSPECIFIED (1983) WEAR MECHANISMS OF SYALON CERAMIC TOOLS WHEN MACHINING NICKEL-BASED MATERIALS. METALS TECHNOLOGY, 10 (DEC). pp. 482-489.

Abbasalizadeh, Aida, Seetharaman, Seshadri, Teng, Lidong, Sridhar, Seetharaman, Grinder, Olle, Izumi, Yukari and Barati, Mansoor (2013) Highlights of the salt extraction process. JOM, Volume 65 (Number 11). pp. 1552-1558. doi:10.1007/s11837-013-0752-7

Bandi, Bharath, van Krevel, Joost, Aslam, Numan and Srirangam, Prakash (2019) A model and experimental validation to predict heating rates for overlap between ferrite recrystallization and austenite transformation in dual phase steel manufacture. JOM . doi:10.1007/s11837-019-03358-2 (In Press)

Bellchambers, Philip, Lee, Jaemin, Varagnolo, Silvia, Amari, Houari , Walker, Marc and Hatton, Ross A. (2018) Elucidating the exceptional passivation effect of 0.8 nm evaporated aluminium on transparent copper films. Frontiers in Materials, 5 . 71. doi:10.3389/fmats.2018.00071

Bianchini, F., Glielmo, A., Kermode, James R. and De Vita, A. (2019) Enabling QM-accurate simulation of dislocation motion in γ−Ni and α−Fe using a hybrid multiscale approach. Physical Review Materials, 3 (4). 043605. doi:10.1103/PhysRevMaterials.3.043605

Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) DEM modelling of a jointed rock beam with emphasis on interface properties. Géotechnique Letters, 5 (1). pp. 49-55. doi:10.1680/geolett.14.00105

Bott, J. H., Yin, H., Sridhar, Seetharaman and Auinger, Michael (2016) Influence of gas composition and exposure cycle on the formation of surface and subsurface oxides in iron-aluminium-based alloys at high temperatures. Metallurgical and Materials Transactions B, 47 (4). pp. 2157-2163. doi:10.1007/s11663-016-0671-4

Cawthorn, C. J., Minton, J. J. and Brambley, Edward J. (2016) Asymptotic analysis of cold sandwich rolling. International Journal of Mechanical Sciences, 106 . pp. 184-193. doi:10.1016/j.ijmecsci.2015.12.012

Ciomaga Hatnean, Monica, Decorse, Claudia, Lees, Martin R., Petrenko, Oleg and Balakrishnan, Geetha (2016) Zirconate pyrochlore frustrated magnets : crystal growth by the floating zone technique. Crystals, 6 (7). 79. doi:10.3390/cryst6070079

Clark, Samuel, Janik, Vit, Lan, Yongjun and Sridhar, Seetharaman (2017) Interphase precipitation – an interfacial segregation model. ISIJ International, 57 (3). pp. 524-532. doi:10.2355/isijinternational.ISIJINT-2016-544

Clark, Samuel J., Janik, Vit, Rijkenberg, Arjan and Sridhar, Seetharaman (2016) Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation. Materials Characterization, 115 . 83 - 89. doi:10.1016/j.matchar.2016.03.021

Crevillén-García, David, Leung, Puiki and Shah, Akeel A. (2018) An emulator for kinetic Monte Carlo simulations of kinetically controlled metal electrodeposition. Journal of Physics: Conference Series, 1053 . 012081. doi:10.1088/1742-6596/1053/1/012081 (In Press)

D'Souza, N., Li, W., Argyrakis, C., West, Geoffrey D. and Slater, Carl (2019) On the evolution of primary gamma prime precipitates during high temperature and high strain rate deformation and subsequent heat treatment in the Ni-based superalloy, RR1000. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-019-05330-w (In Press)

Dai, Chunyan, Zhu, Linhua, Chen, Guangying and Haddleton, David M. (2019) Defect-related luminescent nanostructured hydroxyapatite promotes mineralization through both intracellular and extracellular pathways. RSC Advances , 9 (62). pp. 35939-35947. doi:10.1039/C9RA06629B

Dancer, Claire E. J. (2016) Flash sintering of ceramic materials. Materials Research Express, 3 (10). 102001. doi:10.1088/2053-1591/3/10/102001

Davis, Claire, Mukhopadhyay, P., Strangwood, Martin, Potter, M. D. G., Dixon, S. and Morris, P. F. (2008) Comparison between elastic modulus and ultrasonic velocity anisotropy with respect to rolling direction in steels. Ironmaking & Steelmaking, Vol.35 (No.5). pp. 359-366. doi:10.1179/174328108X271529

Davis, Claire, Strangwood, Martin, Potter, M. D. G., Dixon, S. and Morris, P. F. (2008) Prediction of elastic modulus plus anisotropy using X-ray and electron backscattered diffraction texture quantification and ultrasonic (Electromagnetic acoustic transducer) measurements in aluminum sheets. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.39A (No.3). pp. 679-687. doi:10.1007/s11661-007-9439-4

Davis-Belmar, Carol S., Nicolle, James Le C. and Norris, Paul R. (2008) Ferrous iron oxidation and leaching of copper ore with halotolerant bacteria in ore columns. Hydrometallurgy, Volume 94 (Number 1-4, Special issue SI). pp. 144-147. doi:10.1016/j.hydromet.2008.05.030

De Giovanni, Mario, Warnett, Jason M., Williams, M. A. and Srirangam, Prakash (2017) 3D imaging and quantification of porosity and intermetallic particles in strontium modified Al-Si alloys. Journal of Alloys and Compounds, 727 . pp. 353-361. doi:10.1016/j.jallcom.2017.08.146

Efthymiadis, Panagiotis, Hazra, S. K. , Clough, Andrew Richard, Lakshmi, R., Alamoudi, A., Dashwood, R. J. and Shollock, Barbara A. (2017) Revealing the mechanical and microstructural performance of multiphase steels during tensile, forming and flanging operations. Materials Science and Engineering: A, 701 . pp. 174-186. doi:10.1016/j.msea.2017.06.056

Eremiáš, B., Převorovský, D., Janik, Vit and Faltus, J. (2007) Chemical composition of new copper alloys for machining and its effect on their susceptibility to corrosion cracking. Materials and Corrosion, Vol.58 (No.9). pp. 681-686. doi:10.1002/maco.200704054

Farukh, F., Zhao, L. G., Jiang, R., Reed, P., Proprentner, Daniela and Shollock, Barbara A. (2016) Realistic microstructure-based modelling of cyclic deformation and crack growth using crystal plasticity. Computational Materials Science, 111 . pp. 395-405. doi:10.1016/j.commatsci.2015.09.054

Gisby, John, Taskinen, Pekka, Pihlasalo, Jouni, Li, Zushu, Tyrer, Mark, Pearce, Jonathan, Avarmaa, Katri, Björklund, Peter, Davies, Hugh, Korpi, Mikko, Martin, Susan, Pesonen, Lauri and Robinson, Jim (2017) MTDATA and the prediction of phase equilibria in oxide systems : 30 years of industrial collaboration. Metallurgical and Materials Transactions B, 48 (1). pp. 91-98. doi:10.1007/s11663-016-0811-x

Griffith, Christopher S., Sebesta, Ferdinand, Hanna, John V., Yee, Patrick, Drabarek, Elizabeth, Smith, Mark E. and Luca, Vittorio (2006) Tungsten bronze-based nuclear waste form ceramics. Part 2: Conversion of granular microporous tungstate-polyacrylonitrile (PAN) composite adsorbents to leach resistant ceramics. Journal of Nuclear Materials, Vol.358 (No.2-3). pp. 151-163. doi:10.1016/j.jnucmat.2006.06.018

Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. doi:10.1002/mawe.200800302

Haigh, R. D., Hutchings, M. T., Fitzpatrick, M. E., James, J. A., Okido, S., Mizuno, R., Ogawa, K. and Hughes, Darren J. (2016) Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 . doi:10.1016/j.ijpvp.2016.05.003

Han, Li, Thornton, Martin, Li, Dezhi and Shergold, Mike (2011) Effect of governing metal thickness and stack orientation on weld quality and mechanical behaviour of resistance spot welding of AA5754 aluminium. Materials & Design, Volume 32 (Number 4). pp. 2107-2114. doi:10.1016/j.matdes.2010.11.047

Hazra, S. K. , Williams, D. K., Roy, Rajat, Aylmore, R. and Smith, A. (2011) Effect of material and process variability on the formability of aluminium alloys. Journal of Materials Processing Technology, Vol.211 (No.9). pp. 1516-1526. doi:10.1016/j.jmatprotec.2011.04.001

Hnilica, F., Janik, Vit, Smola, B., Stulíková, I. and Očenášek, V. (2008) Creep behaviour of the creep resistant MgY3Nd2Zn1Mn1 alloy. Materials Science and Engineering: A, 489 (1-2). pp. 93-98. doi:10.1016/j.msea.2007.12.009

Huang, Jianglin, Slater, Carl, Mandal, Anup and Blackwell, Paul (2017) A dynamic model for simulation of hot radial forging process. Procedia Engineering, 207 . pp. 478-483. doi:10.1016/j.proeng.2017.10.808

Ismail, F. B., Vorontsov, V. A., Lindley, T. C., Hardy, M. C., Dye, D. and Shollock, Barbara A. (2017) Alloying effects on oxidation mechanisms in polycrystalline Co–Ni base superalloys. Corrosion Science, 116 . pp. 44-52. doi:10.1016/j.corsci.2016.12.009

Jackson, B. K., Jackson, M., Dye, D., Inman, D. and Dashwood, R. J. (2009) Optimization of the FFC Cambridge process for NiTi production. ECS Transactions, Vol.16 (No.49). pp. 211-219. doi:10.1149/1.3159325

Jackson, M., Jones, N. G., Dye, D. and Dashwood, R. J. (2009) Effect of initial microstructure on plastic flow behaviour during isothermal forging of Ti-10V-2Fe-3Al. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.501 (No.1-2). pp. 248-254. doi:10.1016/j.msea.2008.09.071

Janik, Vit, Bali, G., Grimes, Roger and Dashwood, R. J. (2014) Superplastic forming ability of as-cast AZ91 Mg alloy prepared by twin roll casting. Materialwissenschaft und Werkstofftechnik, 45 (9). pp. 815-821. doi:10.1002/mawe.201400286

Janik, Vit, Hnilica, F., Zuna, P., Očenášek, V. and Stulíková, I. (2008) Cavitation and grain boundary sliding during creep of Mg-Y-Nd-Zn-Mn alloy. Transactions of Nonferrous Metals Society of China, Vol.18 (Suppl.1). s64-s68. doi:10.1016/S1003-6326(10)60176-8

Janik, Vit, Hnilica, František, Smola, Bohumil, Stulíková, Ivana and Očenášek, Vladivoj (2009) Microstructural investigation of the failure mechanisms after creep exposure of Mg–Y–Nd–Zn–Mn alloy. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), Vol.100 (No.3). pp. 296-300. doi:10.3139/146.110035

Janik, Vit, Lan, Yongjun, Beentjes, Peter, Norman, David, Hensen, Guido and Sridhar, Seetharaman (2016) Zn diffusion and α-Fe(Zn) layer growth during annealing of Zn-coated B steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 47 (1). pp. 400-411. doi:10.1007/s11661-015-3203-y

Janik, Vit, Wang, Qu Dong, Yin, Dong Di and Ding, Wen Jiang (2011) Influence of thermal and thermo-mechanical processing on the creep resistance of Mg-10Gd-3Y-0,4Zr alloy. Materials Science Forum, 675-677 . pp. 487-490. doi:10.4028/www.scientific.net/MSF.675-677.487

Janik, Vit, Yin, D. D., Wang, Q. D., He, S. M., Chen, C. J., Chen, Z. and Boehlert, C. J. (2011) The elevated-temperature mechanical behavior of peak-aged Mg–10Gd–3Y–0.4Zr Alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.528 (No.7-8). pp. 3105-3112. doi:10.1016/j.msea.2010.12.089

Ji, Mo, Davis, Claire and Strangwood, Martin (2019) Effect of grain size distribution on recrystallisation kinetics in an Fe-30Ni model alloy. Metals, 9 (3). 369. doi:10.3390/met9030369 (In Press)

Jiang, R., Bull, D. J., Proprentner, Daniela, Shollock, Barbara A. and Reed, P. A. S. (2017) Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy : from 2D to 3D assessment. International Journal of Fatigue, 99 (Part 1). doi:10.1016/j.ijfatigue.2017.03.003

Johnson, R. P. (Roger Paul) (2007) The Eurocode system and the codes for steel and composite structures. Revista Escola de Minas, Vol.60 (No.2). pp. 251-260.

Jones, N. G., Dashwood, R. J., Dye, D. and Jackson, M. (2008) Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.490 (No.1-2). pp. 369-377. doi:10.1016/j.msea.2008.01.055

Jones, N. G., Dashwood, R. J., Dye, D. and Jackson, M. (2009) The flow behavior and microstructural evolution of Ti-5Al-5Mo-5V-3Cr during subtransus isothermal forging. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.40 (No.8). pp. 1944-1954. doi:10.1007/s11661-009-9866-5

Jones, N. G., Dashwood, R. J., Jackson, M. and Dye, D. (2009) Development of chevron-shaped alpha precipitates in Ti-5Al-5Mo-5V-3Cr. Scripta Materialia, Vol.60 (No.7). pp. 571-573. doi:10.1016/j.scriptamat.2008.12.010

Jones, N. G., Dashwood, R. J., Jackson, M. and Dye, D. (2009) beta Phase decomposition in Ti-5Al-5Mo-5V-3Cr. Acta Materialia, Vol.57 (No.13). pp. 3830-3839. doi:10.1016/j.actamat.2009.04.031

Kapoor, Ishwar, Lan, Yongjun, Rijkenberg, Arjan, Li, Zushu and Janik, Vit (2018) Quasi in-situ analysis of geometrically necessary dislocation density in α-fibre and γ-fibre during static recrystallization in cold-rolled low-carbon Ti-V bearing microalloyed steel. Materials Characterization, 145 . pp. 686-696. doi:10.1016/j.matchar.2018.09.032

Kapoor, Ishwar, Narayanan, R Ganesh, Taylor, Scott, Janik, Vit and Dashwood, R. J. (2017) Predicting the warm forming behavior of WE43 and AA5086 alloys. Procedia Engineering, 173 . pp. 897-904.

Katsas, S., Dashwood, R. J., Jackson, M. and Grimes, Roger (2010) Influence of subsequent cold work on the superplastic properties of a friction stir welded (FSW) aluminium alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.527 (No.4-5). pp. 1022-1026. doi:10.1016/j.msea.2009.09.014

Khurana, Bharat, Spooner, Stephen, Rao, M. B. V., Roy, Gour Gopal and Srirangam, Prakash (2017) In situ observation of calcium oxide treatment of inclusions in molten steel by confocal microscopy. Metallurgical and Materials Transactions B . doi:10.1007/s11663-017-0956-2

Kirwan, Kerry and Smith, G. (2000) Co-injection moulding offers alternative solution for automotive glazing. Materials World, Vol.8 (No.11). pp. 20-22.

Kirwan, Kerry, Tucker, N. and Johnson, M. (2003) Nature's way - sustainable polymers and composites. Materials World, Vol.11 (No.10). pp. 32-34.

Kumar Rout, Bapin, Brooks, Geoff, Rhamdhani, M. Akbar, Li, Zushu, Schrama, Frank N. H. and Sun, Jianjun (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : model derivation and validation. Metallurgical and Materials Transactions B . doi:10.1007/s11663-017-1166-7 (In Press)

Li, D., Conway, Paul P. and Liu, Changqing (2008) Corrosion characterization of tin–lead and lead free solders in 3.5wt.% NaCl solution. Corrosion Science, Vol.50 (No.4). pp. 995-1004. doi:10.1016/j.corsci.2007.11.025

Li, D., Liu, Changqing and Conway, Paul P. (2008) Reliability of fine pitch Sn–3.8Ag–0.7Cu flip chip solder joints with different connection pads on PCB. Journal of Electronic Packaging, Vol.130 (No.1). Article: 011005. doi:10.1115/1.2837522

Li, D. and Soar, Rupert C. (2009) Characterization of process for embedding SiC fibers in Al 6061 O matrix through ultrasonic consolidation. Journal of Engineering Materials and Technology, Vol.131 (No.2). Article: 021016. doi:10.1115/1.3030946

Li, D. and Soar, Rupert C. (2009) Influence of sonotrode texture on the performance of an ultrasonic consolidation machine and the interfacial bond strength. Journal of Materials Processing Technology, Vol.209 (No.4). pp. 1627-1634. doi:10.1016/j.jmatprotec.2008.04.018

Li, D. and Soar, Rupert C. (2008) Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.498 (No.1-2). pp. 421-429. doi:10.1016/j.msea.2008.08.037

Li, Dezhi, Han, Li, Thornton, Martin and Shergold, Mike (2012) Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints. Materials & Design, Volume 34 . pp. 22-31. doi:10.1016/j.matdes.2011.07.046

Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Crystallization behavior of liquid CaO-SiO2-FeO-MnO slag in relation to its reaction with moisture. Metallurgical and Materials Transactions B . doi:10.1007/s11663-019-01595-z (In Press)

Li, Juncheng, Bhattacharjee, Debashish, Hu, Xiaojun, Zhang, Dianwei, Sridhar, Seetharaman and Li, Zushu (2019) Effects of slag composition on H2 generation and magnetic precipitation from molten steelmaking slag-steel reaction. Metallurgical and Materials Transactions B, 50 (2). pp. 1023-1034. doi:10.1007/s11663-019-01533-z

Linhart, Wojciech M., Gladysiewicz, Marta, Kopaczek, Jan, Rajpalke, Mohana, Ashwin, M. J., Veal, Timothy David and Kudrawiec, Robert (2017) Indium-incorporation enhancement of photoluminescence properties of Ga(In)SbBi alloys. Journal of Physics D: Applied Physics, 50 (37). 375102. doi:10.1088/1361-6463/aa7e64

Liu, Jun, Hao, X. J., Zhou, L., Strangwood, Martin, Davis, Claire and Peyton, A. J. (2012) Measurement of microstructure changes in 9Cr–1Mo and 2.25Cr–1Mo steels using an electromagnetic sensor. Scripta Materialia, Volume 66 (Number 6). pp. 367-370. doi:10.1016/j.scriptamat.2011.11.032

Liu, Jun, Strangwood, M., Davis, C. L. and Parker, J. (2015) Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors. Materials Science and Technology, 31 (9). pp. 1042-1050. doi:10.1179/1743284714Y.0000000642

Liu, Jun, Strangwood, Martin, Davis, ClaireL and Peyton, Anthony J. (2013) Magnetic evaluation of microstructure changes in 9Cr-1Mo and 2.25Cr-1Mo steels using electromagnetic sensors. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 44 (13). pp. 5897-5909. doi:10.1007/s11661-013-1938-x

Lu, Zhou-li, Gao, Peng-zhao, Ma, Rui-xue, Xu, Jia, Wang, Zheng-he and Rebrov, Evgeny V. (2016) Structural, magnetic and thermal properties of one-dimensional CoFe2O4 microtubes. Journal of Alloys and Compounds, 665 . pp. 428-434. doi:10.1016/j.jallcom.2015.12.262

Ma, C. , Wang, S. C., Low, John C. T. and Walsh, F. C. (2014) Effects of additives on microstructure and properties of electrodeposited nanocrystalline Ni–Co alloy coatings of high cobalt content. Transactions of the IMF, 92 (4). pp. 189-195. doi:10.1179/0020296713Z.000000000115

Ma, Dan, Rezania, Mohammad, Yu, Hai-sui and Bai, Hai-Bo (2017) Variations of hydraulic properties of granular sandstones during water inrush : effect of small particle migration. Engineering Geology, 217 . pp. 61-70. doi:10.1016/j.enggeo.2016.12.006

Mandal, Abhisek, Karmakar, Anish, Chakrabarti, Debalay and Davis, Claire (2018) Effect of alloy treatment and coiling temperature on microstructure and bending performance of ultra-high strength strip steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-018-4946-z

Martus, Ellen (2018) Russian industry responses to climate change : the case of the metals and mining sector. Climate Policy . pp. 1-13. doi:10.1080/14693062.2018.1448254 (In Press)

Mathew, James, Mandal, Animesh, Kumar, S. Deepak, Bajpai, S., Chakraborty, M., West, Geoffrey D. and Srirangam, Prakash (2017) Effect of semi-solid forging on microstructure and mechanical properties of in-situ cast Al-Cu-TiB2 composites. Journal of Alloys and Compounds, 712 . pp. 460-467. doi:10.1016/j.jallcom.2017.04.113

Mathew, James, Mandal, Animesh, Warnett, Jason M., Williams, Mark A., Chakraborty, M. and Srirangam, Prakash (2016) X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB2 semi-solid forged composites. Materials Characterization, 118 . pp. 57-64. doi:10.1016/j.matchar.2016.05.010

Mathew, James, Remy, Guillaume , Williams, M. A., Tang, Fengzai and Srirangam, Prakash (2019) Effect of Fe intermetallics on microstructure and properties of Al-7Si alloys. JOM . doi:10.1007/s11837-019-03444-5 (In Press)

McGlade, Christophe, Pye, Steve, Ekins, Paul, Bradshaw, Michael J. and Watson, Jim (2018) The future role of natural gas in the UK : a bridge to nowhere? Energy Policy, 113 . pp. 454-465. doi:10.1016/j.enpol.2017.11.022

Mohamed, Ikhsan, Hutchins, David A., Davis, Lee A. J., Laureti, Stefano and Ricci, Marco (2017) Ultrasonic NDE of thick polyurethane flexible riser stiffener material. Nondestructive Testing and Evaluation, 32 (4). pp. 343-362. doi:10.1080/10589759.2016.1241253

Mou, Chengbo, Saffari, Pouneh, Li, D., Zhou, Kaiming, Zhang, Lin, Soar, Rupert and Bennion, Ian (2009) Smart structure sensors based on embedded fibre Bragg grating arrays in aluminium alloy matrix by ultrasonic consolidation. Measurement Science and Technology, Vol.20 (No.3). Article: 034013. doi:10.1088/0957-0233/20/3/034013

Mousavi Nezhad, Mohaddeseh, Fisher, Quentin J., Gironacci, Elia and Rezania, Mohammad (2018) Experimental study and numerical modeling of fracture propagation in shale rocks during Brazilian disk test. Rock Mechanics and Rock Engineering, 51 (6). pp. 1755-1775. doi:10.1007/s00603-018-1429-x

Mu, Y. L., Wang, Q. D., Hu, M. L., Janik, Vit and Yin, D. D. (2013) Elevated-temperature impact toughness of Mg–(Gd, Y)–Zr alloy. Scripta Materialia, Volume 68 (Number 11). pp. 885-888. doi:10.1016/j.scriptamat.2013.02.031

Oleaga, A., Shvalya, V., Liubachko, V., Balakrishnan, Geetha, Tung, L. D. and Salazar, A. (2017) Critical behavior study of the spin ordering transition in RVO3 (R = Ce, Pr, Nd, Sm, Gd, Er) by means of ac photopyroelectric calorimetry. Journal of Alloys and Compounds, 703 . pp. 210-215. doi:10.1016/j.jallcom.2017.01.361

Park, Junghwan, Tan, Teck-Yee, Adroja, D. T., Daoud-Aladine, A., Choi, Seongil, Cho, Deok-Yong, Lee, Sang-Hyun, Kim, Jiyeon, Sim, Hasung, Morioka, T., Nojiri, H., Krishnamurthy, V. V., Manuel, P., Lees, Martin R., Streltsov, S. V., Khomskii, D. I. and Park, Je-Geun (2016) Robust singlet dimers with fragile ordering in two-dimensional honeycomb lattice of Li2RuO3. Scientific Reports, 6 (1). 25238. doi:10.1038/srep25238

Peru, Kerry M., Thomas, Mary J., Palacio Lozano, Diana Catalina, McMartin, Dena W., Headley, John V. and Barrow, Mark P. (2019) Characterization of oil sands naphthenic acids by negative-ion electrospray ionization mass spectrometry : influence of acidic versus basic transfer solvent. Chemosphere . doi:10.1016/j.chemosphere.2019.01.162 (In Press)

Pickin, C. G. and Young, Ken (2006) Evaluation of cold metal transfer (CMT) process for welding aluminium alloy. Science and Technology of Welding and Joining, volume 11 (Number 5). pp. 583-585. doi:10.1179/174329306X120886

Poluektov, Mikhail, Freidin, Alexander B. and Figiel, Lukasz (2019) Micromechanical modelling of mechanochemical processes in heterogeneous materials. Modelling and Simulation in Materials Science and Engineering . doi:10.1088/1361-651X/ab3b3a (In Press)

Raghunathan, S. L., Dashwood, R. J., Jackson, M., Vogel, S. C. and Dye, D. (2008) The evolution of microtexture and macrotexture during subtransus forging of Ti–10V–2Fe–3Al. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.488 (No.1-2). pp. 8-15. doi:10.1016/j.msea.2007.10.059

Rahnama, Alireza, Clark, Samuel, Janik, Vit and Sridhar, Seetharaman (2017) A phase-field model for interphase precipitation in V-micro-alloyed structural steels. Computational Materials Science, 137 . pp. 257-265.

Rahnama, Alireza, Clark, Samuel, Janik, Vit and Sridhar, Seetharaman (2018) A phase-field model investigating the role of elastic strain energy during the growth of closely spaced neighbouring interphase precipitates. Computational Materials Science, 142 . pp. 437-443. doi:10.1016/j.commatsci.2017.09.053

Rahnama, Alireza, Dashwood, R. J. and Sridhar, Seetharaman (2017) A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel. Computational Materials Science, 126 . pp. 152-159.

Rahnama, Alireza, Kotadia, Hiren, Clark, Samuel, Janik, Vit and Sridhar, Seetharaman (2018) Nano-mechanical properties of Fe-Mn-Al-C lightweight steels. Scientific Reports, 8 . 9065 . doi:10.1038/s41598-018-27345-w

Rahnama, Alireza and Qin, R. S. (2015) Effect of electric current pulses on the microstructure and niobium carbide precipitates in a ferritic-pearlitic steel at an elevated temperature. Journal of Materials Research, 30 (20). pp. 3049-3055. doi:10.1557/jmr.2015.268

Rahnama, Alireza, Spooner, Stephen and Seetharaman, Sridhar (2017) Control of intermetallic nano-particles through annealing in duplex low density steel. Materials Letters, 189 . pp. 13-16.

Rezania, Mohammad, Bagheri, Meghdad and Mousavi Nezhad, Mohaddeseh (2019) Creep and consolidation of a stiff clay under saturated and unsaturated conditions. Canadian Geotechnical Journal . doi:10.1139/cgj-2018-0398 (In Press)

Rout, Bapin Kumar, Brooks, Geoff, Subagyo, Ir, Rhamdhani, M. Akbar and Li, Zushu (2016) Modeling of droplet generation in a top blowing steelmaking process. Metallurgical and Materials Transactions B, 47 (6). pp. 3350-3361. doi:10.1007/s11663-016-0773-z

Rout, Bapin Kumar, Brooks, Geoffrey, Rhamdhani, Akbar, Li, Zushu and van der knoop, Willem (2019) The behavior of manganese in oxygen steelmaking. Iron and Steel Technology .

Rout, Bapin Kumar, Brooks, Geoffrey, Rhamdhani, Akbar M., Li, Zushu, Schrama, Frank N. H. and Overbosch, Aart (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : modelling of decarburisation. Metallurgical and Materials Transactions B, 49 (2). 537-557 . doi:10.1007/s11663-017-1166-7

Rout, Bapin Kumar, Brooks, Geoffrey, Rhamdhani, M. Akbar, Li, Zushu, Schrama, Frank N. H. and Knoop, Willem van der (2018) Dynamic model of basic oxygen steelmaking process based on multi-zone reaction kinetics : modelling of manganese removal. Metallurgical and Materials Transactions B . doi:10.1007/s11663-018-1306-8 (In Press)

Sellamuthu, Prabhukumar, Samuel, D. G. Harris , Dinakaran, D., Premkumar, V. P., Li, Zushu and Seetharaman, Sridhar (2018) Austempered ductile iron (ADI) : influence of austempering temperature on microstructure, mechanical and wear properties and energy consumption. Metals, 8 (1). 53. doi:10.3390/met8010053

SenGupta, A., Santillana, B., Sridhar, S. and Auinger, Michael (2019) Dendrite growth direction measurements : understanding the solute advancement in continuous casting of steel. IOP Conference Series: Materials Science and Engineering, 529 (1). 012065. doi:10.1088/1757-899X/529/1/012065

Shen, Jialong, Zhou, Lei, Jacobs, Will, Hunt, Peter and Davis, Claire (2019) Real-time in-line steel microstructure control through magnetic properties using an EM sensor. Journal of Magnetism and Magnetic Materials, 490 . 165504. doi:10.1016/j.jmmm.2019.165504

Shen, Ping, Zhang, Lifeng, Wang, Yi, Sridhar, Seetharaman and Wang, Qiangqiang (2016) Wettability between molten slag and dolomitic refractory. Ceramics International, 42 (14). pp. 16040-16048. doi:10.1016/j.ceramint.2016.07.113

Singh, R., Lee, P. D., Lindley, T. C., Kohlhauser, C., Hellmich, C., Bram, M., Imwinkelried, T. and Dashwood, R. J. (2010) Characterization of the deformation behavior of intermediate porosity interconnected Ti foams using micro-computed tomography and direct finite element modeling. Acta Biomaterialia, Vol.6 (No.6). pp. 2342-2351. doi:10.1016/j.actbio.2009.11.032

Slater, Carl, Hechu, Kateryna, Davis, Claire and Sridhar, Seetharaman (2019) Characterisation of the solidification of a molten steel surface using infrared thermography. Metals, 9 (2). 126. doi:10.3390/met9020126

Slater, Carl, Hollyhoke, Neil and Davis, Claire (2017) The influence of alloy composition on the as-cast grain structure in near net shape low-density steels. Ironmaking & Steelmaking . doi:10.1080/03019233.2017.1405180 (In Press)

Slater, Carl, Spooner, Stephen, Davis, Claire and Sridhar, Seetharaman (2016) Chemically induced solidification : a new way to produce thin solid-near- net shapes. Metallurgical and Materials Transactions B, 47 (6). pp. 3221-3224. doi:10.1007/s11663-016-0785-8

Smola, Bohumil, Stulíková, Ivana, Žaludová, Nad'a, Hnilica, František, Janik, Vit and Očenášek, Vladivoj (2009) Phase composition and morphology development in WE-type alloys modified by high Zn content. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), Vol.100 (No.3). pp. 292-295. doi:10.3139/146.110021

Sutton, Clive (2008) Steel and automotive CO2 reduction - Changing environmental legislation will challenge steel's role in vehicles. Materials World, Vol.16 (No.7). pp. 26-28.

Talling, R. J., Dashwood, R. J., Jackson, M. and Dye, D. (2009) Compositional variability in gum metal. Scripta Materialia, Vol.60 (No.11). pp. 1000-1003. doi:10.1016/j.scriptamat.2009.02.044

Talling, R. J., Dashwood, R. J., Jackson, M. and Dye, D. (2009) On the mechanism of superelasticity in gum metal. Acta Materialia, Vol.57 (No.4). pp. 1188-1198. doi:10.1016/j.actamat.2008.11.013

Talling, R. J., Dashwood, R. J., Jackson, M., Kuramoto, S. and Dye, D. (2008) Determination of (C11-C12) in Ti–36Nb–2Ta–3Zr–0.3O (wt.%) (Gum metal). Scripta Materialia, Vol.59 (No.6). pp. 669-672. doi:10.1016/j.scriptamat.2008.05.022

Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Comparison of formability and microstructural evolution of C106 copper and 316L stainless steel. JOM . doi:10.1007/s11837-019-03603-8 (In Press)

Taylor, Scott, Masters, Iain, Li, Zushu and Kotadia, Hiren (2019) Influence of elevated temperatures on mechanical properties and microstructure of C106 Copper investigated by in-situ heated stage EBSD analysis. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science . doi:10.1007/s11661-019-05374-y (In Press)

Tricker, D., Jackson, M. and Dashwood, R. J. (2009) Direct extrusion of titanium alloy powder. Materials Technology, Vol.24 (No.3). pp. 174-179. doi:10.1179/106678509X12475882915411

Wang, Fei, Davis, Claire and Strangwood, Martin (2019) Grain growth on reheating for an as-cast Al-Nb-containing steel with segregated composition. Materials Science and Technology, 35 (5). pp. 615-627. doi:10.1080/02670836.2019.1577533

Wang, Qiangqiang, Zhang, Lifeng and Sridhar, Seetharaman (2016) Modeling on fluid flow and inclusion motion in centrifugal continuous casting strands. Metallurgical and Materials Transactions B, 47 (4). pp. 2623-2642. doi:10.1007/s11663-016-0701-2

Wang, Y. Q., Clark, Samuel, Janik, Vit, Heenan, R. K., Venero, D. Alba, Yan, K., McCartney, D. G., Sridhar, S. and Lee, P. D. (2018) Investigating nano-precipitation in a V-containing HSLA steel using small angle neutron scattering. Acta Materialia, 145 . pp. 84-96. doi:10.1016/j.actamat.2017.11.032

Wang, Zhanjun, Sun, Yongqi, Sridhar, Seetharaman, Zhang, Mei and Zhang, Zuotai (2017) Investigation on viscosity and non-isothermal crystallization behavior of P-bearing steelmaking slags with varying TiO2 content. Metallurgical and Materials Transactions B, 48 (1). pp. 527-537. doi: 10.1007/s11663-016-0825-4

Williams, Jennifer J., Lethbridge, Zoe A. D., Clarkson, Guy J., Ashbrook, Sharon E., Evans, K. E. (Kenneth E.) and Walton, Richard I. (2009) The bulk material dissolution method with small amines for the synthesis of large crystals of the siliceous zeolites ZSM-22 and ZSM-48. Microporous and Mesoporous Materials, Vol.119 (No.1-3). pp. 259-266. doi:10.1016/j.micromeso.2008.10.023

Williams, Jennifer J., Smith, Christopher W., Evans, Kenneth E., Lethbridge, Zoe A. D. and Walton, Richard I. (2007) An analytical model for producing negative poisson's ratios and its application in explaining off axis elastic properties of the NAT-type zeolites. Acta Materialia, Vol.55 (No.17). pp. 5697-5707. doi:10.1016/j.actamat.2007.06.011

Wood, P. K. C., Schley, C. A. (Claus A.), Williams, M. A. (Mark A.) and Rusinek, A. (2011) A model to describe the high rate performance of self-piercing riveted joints in sheet aluminium. Materials & Design, Volume 32 (Number 4). pp. 2246-2259. doi:10.1016/j.matdes.2010.11.018

Xu, Renze, Zhang, Jianliang, Li, Zushu and Zhao, Yongan (2019) Corrosion behavior of alumina containing refractory in blast furnace hearth by CaO-SiO2-MgO-Al2O3-Cr2O3 system slags. ISIJ International . doi:10.2355/isijinternational.ISIJINT-2019-149 (In Press)

Yang, Zhen, Liu, Xianping and Tian, Yanling (2019) Insights into the wettability transition of nanosecond laser ablated surface under ambient air exposure. Journal of Colloid and Interface Science, 533 . pp. 268-277. doi:10.1016/j.jcis.2018.08.082

Yenus, Jaefer, Brooks, Geoffrey, Dunn, Michelle, Li, Zushu and Goodwin, Tim (2017) Study of low flow rate ladle bottom gas stirring using triaxial vibration signals. Metallurgical and Materials Transactions B . doi:10.1007/s11663-017-1118-2

Yin, D. D., Wang, Q. D., Boehlert, C. J. and Janik, Vit (2012) Creep and fracture behavior of peak-aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.43 (No.9). pp. 3338-3350. doi:10.1007/s11661-012-1131-7

Yin, D. D., Wang, Q. D., Boehlert, C. J., Janik, Vit, Gao, Y. and Ding, W. J. (2012) Creep behavior of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) at 573K. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, Vol.546 (No.1). pp. 239-247. doi:10.1016/j.msea.2012.03.060

Yule, Lewis C., Bentley, Cameron Luke, West, Geoffrey D., Shollock, Barbara A. and Unwin, Patrick R. (2019) Scanning electrochemical cell microscopy : a versatile method for highly localised corrosion related measurements on metal surfaces. Electrochimica Acta, 298 . pp. 80-88. doi:10.1016/j.electacta.2018.12.054

Zhao, Shuo, Ge, Yangyang, Ma, Liang, Yan, Tao, Lyu, Jingcai and Li, Zushu (2018) Formation analysis of edge cracks of 33MnCrTiB fork steel. Metals, 8 (8). 587. doi:10.3390/met8080587

Zhou, Lei, Hall, Russell and Davis, Claire (2019) Measured and modelled low field relative permeability for dual phase steels at high temperature. Journal of Magnetism and Magnetic Materials, 475 . pp. 38-43. doi:10.1016/j.jmmm.2018.11.096

Zhuang, Qian D., Anyebe, Ezekiel A., Sánchez, Ana M., Rajpalke, Mohana K., Veal, T. D. (Tim D.), Zhukov, Alexander, Robinson, Benjamin J., Anderson, Frazer, Kolosov, Oleg and Fal’ko, Vladimir (2014) Graphitic platform for self-catalysed InAs nanowires growth by molecular beam epitaxy. Nanoscale Research Letters, Volume 9 (Number 1). Article number 321. doi:10.1186/1556-276X-9-321

Book Item

Grimes, Roger and Janik, Vit (2014) Automotive applications for magnesium. In: Crolla, David and Foster, David E. and Kobayashi, Toshio and Vaughan, Nicholas, (eds.) Encyclopedia of Automotive Engineering. Chichester, West Sussex, United Kingdom: John Wiley & Sons, Ltd., pp. 3105-3122. ISBN 9780470974025

Indriyati, Martha, Janik, Vit and Dashwood, R. J. (2014) Elevated temperature deformation behavior of high strength Al-Cu-Mg-Ag based alloy reinforced by TiB2 particles. In: Grandfield, John, (ed.) Light Metals 2014. Hoboken, New Jersey: The Minerals, Metals & Materials Society, pp. 1353-1358. ISBN 9781118889084

Janik, Vit, Clark, Sam, Srirangam, Prakash, Rijkenberg, Arjan and Sridhar, Seetharaman (2015) Application of in-situ material characterization methods to describe role of Mo during processing of Vbearing micro-alloyed steels. In: HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. Hoboken, NJ, USA.: John Wiley & Sons, Inc., pp. 289-295. ISBN 9781119223306

Conference Item

UNSPECIFIED (1990) CRYSTAL FIELDS IN ND2-XSRXNIO4+Y. In: 1990 SPRING MEETING SYMP ON HIGH-TC SUPERCONDUCTOR MATERIALS, STRASBOURG, FRANCE, MAY 29-JUN 01, 1990. Published in: JOURNAL OF THE LESS-COMMON METALS, 164 (Part B). pp. 915-919. ISSN 0022-5088.

UNSPECIFIED (1985) DISTRIBUTION OF DILATIONAL AND SHEAR STRAIN AROUND A NOTCH. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 37 (8). A57-A57. ISSN 0148-6608.

UNSPECIFIED (1985) EVIDENCE FOR DEFORMATION-INDUCED CLEAVAGE DURING TRANSGRANULAR STRESS-CORROSION CRACKING OF ALPHA-BRASS. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 37 (11). A28-A28. ISSN 0148-6608.

UNSPECIFIED (1996) Economic comparisons between simple and partial-strength design of braced steel frames BEHAVIOUR, STRENGTH AND DESIGN. In: 3rd International Workshop on Connections in Steel Structures - Behaviour, Strength and Design, TRENT, ITALY, MAY 29-31, 1995. Published in: CONNECTIONS IN STEEL STRUCTURES III pp. 527-533. ISBN 0-08-042821-5.

UNSPECIFIED (1996) Eurocode 4 and design of composite joints BEHAVIOUR, STRENGTH AND DESIGN. In: 3rd International Workshop on Connections in Steel Structures - Behaviour, Strength and Design, TRENT, ITALY, MAY 29-31, 1995. Published in: CONNECTIONS IN STEEL STRUCTURES III pp. 223-235. ISBN 0-08-042821-5.

UNSPECIFIED (1993) IN-SITU SYNCHROTRON-RADIATION X-RAY TECHNIQUES FOR STUDIES OF CORROSION AND PROTECTION. In: International Conference to Mark the 20th Anniversary of the UMIST Corrosion-and-Protection-Centre: Advances in Corrosion and Protection, UNIV MANCHESTER, INST SCI & TECHNOL, MANCHESTER, UNITED KINGDOM, JUN 28-JUL 03, 1992. Published in: CORROSION SCIENCE, 35 (1-4). pp. 791-800. ISSN 0010-938X.

UNSPECIFIED (1992) AN INVESTIGATION INTO BACTERIAL-CELL, FERROUS IRON, PH AND EH INTERACTIONS DURING THERMOPHILIC LEACHING OF COPPER CONCENTRATES. In: INTERNATIONAL SYMP ON REAGENTS IN MINERALS ENGINEERING, CAMBORNE SCH MINES, CORNWALL, ENGLAND, SEP 18-20, 1991. Published in: MINERALS ENGINEERING, 5 (3-5). pp. 557-567. ISSN 0892-6875.

UNSPECIFIED (1991) MAGNETIC-RESONANCE DETERMINATION OF THE ELECTRONIC DENSITY OF STATES AND THE METAL NONMETAL TRANSITION IN THE LAH2-LAH3 SYSTEM. In: INTERNATIONAL SYMP ON METAL-HYDROGEN SYSTEMS, FUNDAMENTALS AND APPLICATIONS, BANFF, CANADA, SEP 02-07, 1990. Published in: JOURNAL OF THE LESS-COMMON METALS, 172 (Part A). pp. 411-418. ISSN 0022-5088.

UNSPECIFIED (1988) MICROTOMOGRAPHY OF DAMAGE IN SIC/AL CONTINUOUS FIBER COMPOSITES. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 40 (11). p. 54. ISSN 0148-6608.

UNSPECIFIED (1988) MICROTOMOGRAPHY OF SILICON-NITRIDE SILICON-CARBIDE COMPOSITES. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 40 (7). A87-A87. ISSN 0148-6608.

UNSPECIFIED (1997) Mechanical properties of silicate matrix SiC yarn reinforced composites. In: 9th International Conference in Fracture (ICF9), SYDNEY, AUSTRALIA, APR 01-05, 1997. Published in: ADVANCES IN FRACTURE RESEARCH, VOLS 1-6 pp. 1127-1134. ISBN 0-08-042820-7.

UNSPECIFIED (2004) Microstructure and performance limits of ceramic matrix composites. In: 3rd Oxford-Kobe Materials Seminar, Kobe Inst, Kobe, JAPAN, SEP 19-22, 2000. Published in: METAL AND CERAMIC MATRIX COMPOSITES pp. 299-322. ISBN 0-7503-0872-9.

UNSPECIFIED (1987) ON THE THEORY OF ORDERING PROCESSES IN ALLOYS. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 39 (7). A39-A39. ISSN 0148-6608.

UNSPECIFIED (1997) Ordering tendencies in alloys and their microscopic origins from a first-principles theory of concentration waves. In: TMS Annual Meeting, LAS VEGAS, NV, FEB 12-16, 1995. Published in: JOURNAL OF PHASE EQUILIBRIA, 18 (6). pp. 598-607. ISSN 1054-9714.

UNSPECIFIED (1990) STRUCTURAL, MAGNETIC AND ELECTRICAL-PROPERTIES OF STRONTIUM-DOPED NEODYMIUM NICKELATE. In: 1990 SPRING MEETING SYMP ON HIGH-TC SUPERCONDUCTOR MATERIALS, STRASBOURG, FRANCE, MAY 29-JUN 01, 1990. Published in: JOURNAL OF THE LESS-COMMON METALS, 164 (Part B). pp. 920-925. ISSN 0022-5088.

UNSPECIFIED (1988) THEORETICAL INSIGHTS INTO THE UNDERLYING MECHANISMS RESPONSIBLE FOR PHYSICAL-PROPERTIES OF ALLOYS. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 40 (11). p. 54. ISSN 0148-6608.

UNSPECIFIED (1998) Triamidoamine complexes of the actinides; from mixed-valence bimetallics to dinitrogen activation. In: Actinides-97 Conference, BADEN BADEN, GERMANY, SEP 21-26, 1997. Published in: JOURNAL OF ALLOYS AND COMPOUNDS, 271 pp. 150-153. ISSN 0925-8388.

UNSPECIFIED (1982) WHITE BEAM SYNCHROTRON FRACTOGRAPHY OF (001) ORIENTED MOLYBDENUM CRYSTALS. In: UNSPECIFIED. Published in: JOURNAL OF METALS, 34 (8). p. 4. ISSN 0148-6608.

Andrzejewski, B., Kowalczyk, A., Jezierski, A., Lees, Martin R. and Chelkowska, G. (2007) Superconducting properties of W7Re13B compound. In: 15th International Conference on Solid Compounds of Transition Elements, Jagiellonian Univ, Inst Phys, Cracow, Poland, JUL 15-20, 2006. Published in: Journal of Alloys and Compounds, Vol.442 (No.1-2). pp. 225-227. ISSN 0925-8388. doi:10.1016/j.jallcom.2006.08.358

Ascroft, Helen, Barnes, Stuart, Dahnel, Aishah Najiah, Gupta, Aniruddha, Abd Halim, Nor Farah Huda Binti and Ray, David (2016) Ultrasonic assisted machining. In: The 17th International Conference on Machine Design and Production, Bursa, Turkiye, 12-15 Jul 2016. Published in: UMTIK 2016 The 17th International Conference on Machine Design and Production, Conference proceedings, 1 pp. 15-30. ISBN 9789754293579.

Bisschoff, Wilhelm, Zabihi, Nima and Gouws, Rupert (2017) Development of an energy source management system for a prototype supercapacitor rough terrain mine vehicle. In: International Conference on Electrical, Electronics, Computers, Communication, Mechanical and Computing (EECCMC), Tamil Nadu, India, 28-29 Jan 2018 (Unpublished)

Chakrapani Rao, Arun and Lahiri, A. K. (1994) Prediction of silicon content in hot metal in blast furnaces. In: Indian Ironmaking Conference, Jamshedpur, India, Jan 1995. Published in: Proceedings of the Indian Ironmaking Conference 1995

Chinchilla Adell, Raul Francisco, Burkinshaw, Michael, Lindsay, Martin, Proprentner, Daniela and Shollock, Barbara A. (2018) The tribological performance of coated and non-coated materials in high temperature environments. In: 13th International Conference on Turbochargers and Turbocharging, London, UK, 16-17 May 2018

Clark, Samuel J., Lan, Yongjun, Janik, Vit, Rijkenberg, Arjan and Sridhar, Seetharaman (2017) In-situ characterisation of austenite/ferrite transformation kinetics and modelling of interphase precipitation inter-sheet spacing in V microalloyed HSLA steels. In: THERMEC 2016, Graz, Austria, 29 May 2016 - 03 Jun 2016. Published in: Materials Science Forum, 879 pp. 356-362. ISSN 1662-9760.

Crosby, Henry James, Davis, Paul, Damoulas, Theodoros and Jarvis, Stephen A. (2016) A spatio-temporal, Gaussian Process Regression, real-estate price predictor. In: 24th ACM SIGSPATIAL International Conference on Advances in Geographic Information Systems (ACM SIGSPATIAL 2016), San Francisco, 31 Oct - 3 Nov 2016. Published in: GIS '16 Proceedings of the 24th ACM SIGSPATIAL International Conference on Advances in Geographic Information Systems p. 68. ISBN 9781450345897 .

D'Hugues, P., Norris, Paul R., Hallberg, Kevin B., Sánchez, F., Langwaldt, J., Grotowski, A., Chmielewski, T. and Groudev, S. (2008) Bioshale FP6 European project : Exploiting black shale ores using biotechnologies? In: Bio and Hydrometallurgy 2007 Conference, Falmouth, England, May, 2007. Published in: Minerals Engineering, Vol.21 (No.1). pp. 111-120. ISSN 0892-6875. doi:10.1016/j.mineng.2007.10.004

Dashwood, R. J., Jackson, M., Klaumunzer, David, Fan, Zhongyun and Grimes, Roger (2008) The development of a new manufacturing route for superplastic magnesium alloy sheet exploiting twin roll casting. In: The 6th European Conference on Superplastic Forming (EuroSPF 2008), Carcassonne, France, Sep 3-5, 2008. Published in: EuroSPF 2008, Carcassonne : France (2008) pp. 1-7.

Eremias, B., Janik, Vit, Cihal, V. and Kalabisova, E. (2010) Slip-dissolution model of stress corrosion crack growth and possibilities of its application for evaluation of stress corrosion cracking susceptibility of duplex stainless steels in hydrogen sulfide-chloride environments at 120°C. In: EUROCORR 2008 - European Corrosion Congress : Managing Corrosion for Sustainability, Edinburgh, 7.9.-11.9.2008. Published in: EUROCORR 2008 - European Corrosion Congress: Managing Corrosion for Sustainability, Book of Abstracts p. 109.

Han, Li, Thornton, Martin, Li, Dezhi and Shergold, Mike (2010) Effect of setting velocity on self-piercing riveting process and joint behaviour for automotive applications. In: SAE 2010 World Congress & Exhibition, Detroit, MI, U.S.A., Apr 12-15, 2010. Published in: SAE Technical Papers ISSN 0148-7191. doi:10.4271/2010-01-0966

Hazra, S. K. , Efthymiadis, Panagiotis, Proprentner, Daniela, Shollock, Barbara A. and Dashwood, Richard (2017) The strain fields present during the bending of ultra-high strength steels. In: International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, 17-22 Sept 2017. Published in: Procedia Engineering, 207 pp. 1314-1319. ISSN 1877-7058.

Janik, Vit (2015) Magnesium alloys for high performance structural components in automotive industry. In: BIT's 4th Annual Congress on Advanced Materials - 2015, Chongqing, China, 27-29 May 2015

Janik, Vit, Beentjes, Peter, Norman, David, Hensen, Guido and Sridhar, Seetharaman (2014) Role of heating conditions on microcrack formation in zinc coated 22mnb5. In: Materials Science and Technology Conference and Exhibition (MS&T 14), Pittsburgh, PA, U.S.A., 12-16 Oct 2014. Published in: Materials Science & Technology Conference and Exhibition 2014 (MS&T'14) : Proceedings of a meeting held 12-16 October 2014, Pittsburgh, Pennsylvania, USA. ISBN 9781634397230.

Janik, Vit, Lan, Yongjun, Beentjes, Peter, Norman, David, Hensen, Guido and Sridhar, Seetharaman (2015) Zn diffusion and α-Fe (Zn) layer growth during annealing of Zn-coated B steel. In: 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel, Toronto, Canada, 31 May - 4 Jun 2015

Janik, Vit, Sridhar, Seetharaman and Rahnama, Alireza (2015) Advances in processing of automotive HSLA steels by application of in-situ materials characterisation and phase field modelling. In: 53rd National Metallurgists’ Day, Annual Technical Meeting (ATM) , Coimbatore, India, 13-16 Nov 2015 (Unpublished)

Jiang, R., Gao, N., Reed, P. A.S., Proprentner, Daniela, Shollock, Barbara A., Farukh, F. and Zhao, L. (2015) Effects of oxidation on fatigue crack initiation and propagation in an advanced disc alloy. In: The 9th International Charles Parsons Turbine and Generator Conference, Loughborough, 15-17th Sep 2015

Johnson, R. P. (Roger Paul) (2006) Models for the longitudinal shear resistance of composite slabs, and the use of non-standard test data. In: 5th International Conference on Composite Construction in Steel and Concrete V, Mpumalanga, South Africa, 18-23 Jul 2004. Published in: Composite Construction in Steel and Concrete , Volume V pp. 157-165. ISBN 9780784408261.

Li, Dezhi, Han, Li, Thornton, Martin and Shergold, Mike (2010) An evaluation of quality and performance of self-piercing riveted high strength aluminium alloy AA6008 for automotive applications. In: SAE 2010 World Congress & Exhibition, Detroit, MI, U.S.A., Apr 12-15, 2010. Published in: SAE Technical Papers ISSN 0148-7191. doi:10.4271/2010-01-0223

Mou, Chengbo, Saffari, Pouneh, Li, D., Zhou, Kaiming, Zhang, Lin, Soar, Rupert C. and Bennion, Ian (2008) Embedded fibre Bragg grating array sensors in aluminium alloy matrix by ultrasonic consolidation. In: 19th International Conference on Optical Fibre Sensors, Perth, Australia, Apr 14-18, 2008. Published in: Proceedings of the SPIE - International Society for Optical Engineering, Vol.7004 Article: 70044B. ISSN 0277-786X. doi:10.1117/12.786065

Moztarzadeh, Hadi, Hughes, Darren J., Seth, Sampan, Keating, Elspeth, Kirachi, Ercihan , Gibbons, Gregory John and Dashwood, R. J. (2015) Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V. In: 8th International Conference on Mechanical Stress Evaluation by Neutron & Synchrotron Radiation MACASENS 2015, Grenoble, France, 30 Sep -2 Oct 2015. Published in: Materials Science Forum ISSN 1662-9752. (In Press)

Norris, P. R., Davis-Belmar, C. S., Nicolle, J. Le C., Calvo-Bado, Leo A. and Angelatou, V. (2010) Pyrite oxidation and copper sulfide ore leaching by halotolerant, thermotolerant bacteria. In: 18th International Biohydrometallurgy Symposium, Bariloche, Argentina, September 13-17, 2009. Published in: Hydrometallurgy, Vol.104 (No.3-4). pp. 432-436. ISSN 0304-386X. doi:10.1016/j.hydromet.2010.03.025

Pashby, I. R., Bryden, B. G. and Barnes, Stuart (2000) The influence of glass reinforcement on the diode laser transmission welding of nylon. In: Laser Materials Processing Conference (ICALEO(R) 2000), Dearborn, Michigan, 02-05 Oct 2000. Published in: ICALEO(R) 2000: Proceedings of the Laser Materials Processing Conference, Volume 89 A34-A39. ISBN 0-912035-62-5.

Rout, Bapin Kumar, Brooks, G., Rhamdhani, M. A., Li, Zushu and van der Knoop, W. (2018) The behavior of manganese in oxygen steelmaking. In: AISTech 2018 - The Iron & Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018

Rout, Bapin Kumar, Brooks, G. A., Li, Zushu, Rhamdhani, A., Schrama, Frank N. H. and Overbosch, A. (2018) Dynamic modelling of BOF process : comparison of model performance with the plant data. In: AISTech 2018 - The Iron and Steel Technology Conference and Exposition, Pennsylvania Convention Centre, Philadelphia, PA., USA, 7-10 May 2018

Silk, Jonathan R., Dashwood, R. J. and Chater, Richard J. (2010) Determination of lattice orientation in aluminium alloy grains by low energy gallium ion-channelling. In: 19th International Conference on Ion Beam Analysis, University of Cambridge, Cambridge, England, September 07-11, 2009. Published in: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol.268 (No.11-12). pp. 2064-2068. ISSN 0168-583X. doi:10.1016/j.nimb.2010.02.056

Small, Neil, Hazra, S. K. , Williams, D. K., Roy, Rajat, Nichols, Thomas E., Aylmore, R. and Hollingdale, D. (2013) Determining a probabilistic forming limit curve. In: The 9th International conference and workshop on numerical simulation of 3D sheet metal forming process, Melbourne, Australia, 6-10 Jan 2014. Published in: AIP Conference Proceedings, 1567 (1). ISBN 9780735411951. ISSN 0094-243X.

Spooner, Stephen, Assis, Andre N., Warnett, Jason M., Fruehan, Richard J., Williams, M. A. (Mark A.) and Sridhar, Seetharaman (2015) CSLM, XCT Couple interrogation of the emulsification interaction between free steel droplets suspended in steel making slags. In: CTSSC-EMI Symposium, Tokyo, Japan, 3-4 Sep 2015

Taylor, Scott, Janik, Vit, Kapoor, Ishwar, Mogire, Evans, Grimes, Roger and Dashwood, R. J. (2015) Comparison of superplastic forming abilities of elektron 43 alloy and as-cast AZ91 alloy prepared by twin roll casting. In: Conference: 12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015, Tokyo, Japan, 7-11 Sep 2015

Thring, Claire B., Fan, Yichao and Edwards, R. S. (Rachel Sian) (2017) Multiple focused EMAT designs for improved surface breaking defect characterization. In: 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, Atlanta, GA, USA, 17-22 Jul 2016. Published in: AIP Conference Proceedings, 1806 (1). 020019. ISBN 9780735414747. ISSN 0094-243X.

Working or Discussion Paper

Sikod, Fondo (2006) Globalisation and rural development in Africa: the case of the Chad-Cameroon oil pipeline. Working Paper. Coventry: University of Warwick. Centre for the Study of Globalisation and Regionalisation. Working papers (University of Warwick. Centre for the Study of Globalisation and Regionalisation) (No.203).

Book

Li, Zushu and Davis, Claire, eds. (2019) Ironmaking and steelmaking. Basel ; Beijing ; Wuhan ; Barcelona ; Belgrade: MDPI. ISBN 9783039213290

Journal Item

UNSPECIFIED (1985) EMPIRICAL CONFIRMATION OF A BREDIG TRANSITION IN UO2. JOURNAL OF NUCLEAR MATERIALS, 132 (1). pp. 76-79.

UNSPECIFIED (1986) THE HEAT-CAPACITY AND ENTHALPY OF CONDENSED UO2 - CRITICAL-REVIEW AND ASSESSMENT. JOURNAL OF NUCLEAR MATERIALS, 140 (2). pp. 149-170.

UNSPECIFIED (1987) MANUFACTURE AND PROPERTIES OF CERAMIC CUTTING TOOLS - A REVIEW. MATERIALS SCIENCE AND TECHNOLOGY, 3 (11). pp. 881-887.

UNSPECIFIED (1998) Postdoc jobs. MATERIALS WORLD, 6 (7). p. 439.

UNSPECIFIED (1986) A STUDY OF THE VACANCY DISTRIBUTION IN NONSTOICHIOMETRIC SPINELS BY MAGIC-ANGLE SPINNING NMR. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 53 (2). L17-L20.

Thesis or Dissertation

Clark, Samuel (2019) Nano-structuring of micro-alloyed steels via nano-precipitate formation. PhD thesis, University of Warwick.

Fisher, Chris (1978) Free miners and colliers: custom, the crown and trade unionism in the Forest of Dean, 1788-1886. PhD thesis, University of Warwick.

Hechu, Kateryna (2018) Assessment of solidification behaviour of peritectic steels. PhD thesis, University of Warwick.

Hoult, A. P. (1999) An experimental analysis of solid state pulsed laser melting of aluminium. PhD thesis, University of Warwick.

Ji, Mo (2018) Effect of Grain Size Distribution and Nb Addition on the Recrystallisation Avrami exponent of Fe- 30Ni Model Alloy. PhD thesis, University of Warwick.

Kawana, Albert Jacob (1988) The political economy of mining laws and regulations in Namibia from 1884 to 1986. PhD thesis, University of Warwick.

Spooner, Stephen (2017) Quantifying the transient interfacial area during slag-metal reactions. PhD thesis, University of Warwick.