Browse by Subject
|Up a level|
Number of items at this level: 202.
Abulrub, Abdul-Hadi G., Yin, Yanting and Williams, M. A. (Mark A.) (2012) Acceptance and management of innovation in SMEs: immersive 3D visualisation. In: International Conference on Leadership, Technology and Innovation Management 2011, Antalya, Turkey, Oct 21-23, 2011. Published in: Procedia - Social and Behavioral Sciences, 41 pp. 304-314.
Agyapong-Kodua, Kwabena, Ajaefobi, J. O. and Weston, R. H.. (2009) Modelling dynamic value streams in support of process design and evaluation. International Journal of Computer Integrated Manufacturing , Vol.22 (No.5). pp. 411-427. ISSN 0951-192X
Agyapong-Kodua, Kwabena, Asare, K. B. and Ceglarek, Darek. (2014) Digital modelling methodology for effective cost assessment. Procedia CIRP, Volume 17 . pp. 744-749. ISSN 2212-8271
Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Németh, István. (2014) Resource selection ontologies in support of a recipe-based factory design methodology. International Journal of Production Research . ISSN 0020-7543 (In Press)
Agyapong-Kodua, Kwabena, Haraszkób, Csaba and Némethb, István. (2014) Recipe-based integrated semantic product, process, resource (PPR) digital modelling methodology. Procedia CIRP, Volume 17 . pp. 112-117. ISSN 2212-8271
Ahmad, Bilal, Vera, Daniel and Harrison, Robert. (2016) Engineering methods and tools for cyber–physical automation systems. Proceedings of the IEEE , PP (99). pp. 1-13. ISSN 0018-9219
Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.
Alifantis, Thanos (2006) Knowledge based improvement : simulation and artificial intelligence for understanding and improving decision making in an operations system. PhD thesis, University of Warwick.
Alkan, Bugra, Vera, Daniel, Ahmad, Mussawar, Ahmad, Bilal and Harrison, Robert (2016) A model for complexity assessment in manual assembly operations through predetermined motion time systems. In: 6th CIRP Conference on Assembly Technologies and Systems (CATS), Gothenburg, Sweden, 16-17 May 2016. Published in: Procedia CIRP, 44 pp. 429-434.
Alkan, Bugra, Vera, Daniel, Kaniappan Chinnathai, Malarvizhi and Harrison, Robert (2017) Assessing complexity of component-based control architectures used in modular automation systems. In: International Conference on Computer and Information Technology, Kusadasi, Turkey, 12-14 Apr 2017. Published in: Journal of Computer and Electrical Engineering (In Press)
Armoutis, N., Maropoulos, P. G. (Paul G.), Matthews, Peter C. and Lomas, C. D. W.. (2008) Establishing agile supply networks through competence profiling. International Journal of Computer Integrated Manufacturing , Vol.21 (No.2). pp. 166-173. ISSN 0951-192X
Attallah, Moataz M., Preuss, Michael, Boonchareon, Chatri, Steuwer, Axel, Daniels, John E., Hughes, Darren J., Dungey, Christopher and Baxter, Gavin J.. (2012) Microstructural and residual stress development due to inertia friction welding in Ti-6246. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.43 (No.9). pp. 3149-3161. ISSN 1073-5623
Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.
Bal, Darbara Jay (1995) Materials selection using knowledge-based techniques. PhD thesis, University of Warwick.
Barnes, Stuart, Pashby, I. R. and Mok, D. K.. (1996) The effect of workpiece temperature on the machinability of an aluminum/SiC MMC. Journal of Manufacturing Science and Engineering, Vol.118 (No.3). pp. 422-427. ISSN 1087-1357
Barnes, Stuart, Timms, N., Bryden, B. G. and Pashby, I. R.. (2003) High power diode laser cladding. Journal of Materials Processing Technology, Volume 138 (Number 1-3). pp. 411-416. ISSN 0924-0136
Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.
Beaumont, Richard Adrian (2012) Determining the effect of strain rate on the fracture of sheet steel. PhD thesis, University of Warwick.
Berg, Maxine (2010) The British product revolution of the eighteenth century. In: Horn, Jeff, Ph. D. and Rosenband, Leonard N. and Smith, Merritt Roe, 1940-, (eds.) Reconceptualizing the Industrial Revolution. Cambridge, Mass.: MIT Press, pp. 47-66. ISBN 9780262014519
Beynon, Meurig, Cartwright, Richard, Cartwright, Alan and Yung, Yun Pui (1996) Abstract geometry for design in an empirical modelling context. University of Warwick. Department of Computer Science. (Department of Computer Science research report). (Unpublished)
Bing, G. J. A. and Wallbank, J.. (2008) The effect of using a sprung stripper in sheet metal cutting. Journal of Materials Processing Technology, Vol.200 (No.1-3). pp. 176-184. ISSN 0924-0136
Bosworth, Derek L. and Wilson, Robert A.. (1978) Some evidence on the productivity of qualified manpower in Britain : a note. Bulletin of Economic Research, Volume 30 (Number 1). pp. 45-49. ISSN 0307-3378
Bott, J. H., Yin, H., Sridhar, Seetharaman and Auinger, Michael. (2016) Influence of gas composition and exposure cycle on the formation of surface and subsurface oxides in iron-aluminium-based alloys at high temperatures. Metallurgical and Materials Transactions B, 47 (4). pp. 2157-2163. ISSN 1073-5615
Britnell, David John, Tucker, N., Smith, G. F. and Wong, S. S. F. (2003) Bent pultrusion - a method for the manufacture of pultrudate with controlled variation in curvature. In: 9th International Manufacturing Conference, Hong Kong, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, Volume 138 (Special Issue). pp. 311-315.
Butterfield, Joe, Ng, Irene C. L., Roy, Rajkumar and McEwan, William (2009) Enabling value co-production in the provision of support service engineering solutions using digital manufacturing methods. In: Winter Simulation Conference 2009, Austin, TX, U.S.A., 13-16 Dec 2009 . Published in: Proceedings of the Winter Simulation Conference 2009 pp. 3009-3022.
Cain, Rebecca, Bitterman, N., Ludden, G., MacKrill, James B., Ozcan, E., Petermans, A. and Escobar-Tello, C. (2016) Introduction : Design for health, wellbeing and happiness. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Proceedings of DRS 2016 International Conference: Future–Focused Thinking 50th Anniversary International Conference Brighton, UK, 27–30 June 2016, 4 pp. 1434-1441.
Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.
Cheeseman, M. J., Swann, P., Hesketh, G. B. and Barnes, Stuart. (2005) Adaptive manufacturing scheduling : a flexible and configurable agent-based prototype. Production Planning & Control, Volume 16 (Number 5). pp. 479-487. ISSN 0953-7287
Chen, Bo, Coffman, Ed , Dereniowski, Dariusz and Kubiak, Wiesław. (2015) Normal-form preemption sequences for an open problem in scheduling theory. Journal of Scheduling, 19 (6). pp. 701-728. ISSN 1094-6136
Chen, Bo, Ye, Yinyu and Zhang, Jiawei. (2006) Lot-sizing scheduling with batch setup times. Journal of Scheduling, Vol.9 (No.3). pp. 299-310. ISSN 1094-6136
Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa. (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology . ISSN 2194-4288 (In Press)
Cherrington, Ruth, Wood, Benjamin M. and Goodship, Vannessa. (2016) Digital printing of titanium dioxide for dye sensitized solar cells. Journal of Visualized Experiments (JoVE) (111). e53963. ISSN 1940-087X
Cheung, Yen Ping (1991) Artificial intelligence techniques for assembly process planning. PhD thesis, University of Warwick.
Choy, K. L. , Lee, W. B., Lau, Henry, Lu, Dawei and Lo, Victor. (2004) Design of an intelligent supplier relationship management system for new product development. International Journal of Computer Integrated Manufacturing , Vol. 17 (No. 8). pp. 692-715. ISSN 0951-192X
Clark, Eppie E.. (2007) Value assessment of workers of ON, AMKOR and HITACHI firms in the Philippines. PICMET 2007 Proceedings . pp. 2656-2671.
Coles, Stuart R., Jacobs, Daniel K., Meredith, James O., Barker, Guy C., Clark, A. J. (Andrew J.), Kirwan, Kerry, Stanger, Jonathan and Tucker, Nick. (2010) A design of experiments (DoE) approach to material properties optimization of electrospun nanofibers. Journal of Applied Polymer Science, Vol.117 (No.4). pp. 2251-2257. ISSN 0021-8995
Colledani, Marcello, Bolognese, L., Ceglarek, Darek, Franchini, Fabio, Marine, C. and Mistry, A.. (2015) Multi-objective early-stage design of automotive hybrid assembly lines. Procedia CIRP, Volume 28 . pp. 125-130. ISSN 2212-8271 (In Press)
Conceição, Samuel Vieira, da Silva, Gerson Luis Caetano, Lu, Dawei, Nunes, Nilson Tadeu Ramos and Pedrosa, Guilherme Corteletti. (2015) A demand classification scheme for spare part inventory model subject to stochastic demand and lead time. Production Planning & Control: The Management of Operations . ISSN 0953-7287 (In Press)
Cook, N. J. (Nicholas John), Smith, Gordon F. and Maggs, Steven J.. (2008) A novel multipin positioning system for the generation of high-resolution 3-D profiles by pin-arrays. IEEE Transactions on Automation Science and Engineering, Vol.5 (No.2). pp. 216-222. ISSN 1545-5955
Cooper, David E. , Stanford, Mark, Kibble, Kevin A. and Gibbons, Gregory John. (2012) Additive manufacturing for product improvement at Red Bull Technology. Materials & Design, Vol.41 . pp. 226-230. ISSN 02613069
Cox, Sophie C. (2013) Synthesis and 3D printing of hydroxyapatite scaffolds for applications in bone tissue engineering. PhD thesis, University of Warwick.
Crafts, N. F. R. and Wolf, Nikolaus. (2014) The location of the UK cotton textiles industry in 1838 : a quantitative analysis. The Journal of Economic History , 74 (4). pp. 1103-1139. ISSN 0022-0507
Crawford, Deborah, Casaban, Jose, Haydon, Robert, Giri, Nicola, McNally, Tony and James, Stuart L.. (2015) Synthesis by extrusion : continuous, large-scale preparation of MOFs using little or no solvent. Chemical Science, Volume 6 (Number 3). pp. 1645-1649. ISSN 2041-6520
Dai, Jinhuo, Nanayakkara, Sepa, Lamb, Thomas, Clark, Andrew J., Guo, Si-Xuan, Zhang, Jie, Patti, Antonio F. and Saito, Kei. (2016) Effect of the N-based ligands in copper complexes for depolymerisation of lignin. New Journal of Chemistry, 40 (4). pp. 3511-3519. ISSN 1144-0546
Das, Abhishek (2016) Shape variation modelling, analysis and statistical control for assembly system with compliant parts. PhD thesis, University of Warwick.
Dashwood, R. J., Jackson, M., Klaumunzer, David, Fan, Zhongyun and Grimes, Roger (2008) The development of a new manufacturing route for superplastic magnesium alloy sheet exploiting twin roll casting. In: The 6th European Conference on Superplastic Forming (EuroSPF 2008), Carcassonne, France, Sep 3-5, 2008. Published in: EuroSPF 2008, Carcassonne : France (2008) pp. 1-7.
Dessens, Luis Felipe Romero (2003) Strong component-based methodology for facility layout design. PhD thesis, University of Warwick.
Di Maggio, F., Ling, M., Tsang, A., Covington, James A., Saffell, J. and Blackman, C.. (2014) Aerosol-assisted CVD synthesis, characterisation and gas-sensing application of gold-functionalised tungsten oxide. Journal of Sensors and Sensor Systems, 3 (2). pp. 325-330. ISSN 2194-878X
Dinda, Soumitra Kumar, Basiruddin Sk, Md., Roy, Gour Gopal and Srirangam, Prakash. (2016) Microstructure and mechanical properties of electron beam welded dissimilar steel to Fe-Al alloy joints. Materials Science and Engineering: A . ISSN 0921-5093 (In Press)
Dinda, Soumitra Kumar, Warnett, Jason M., Williams, Mark A., Roy, Gour Gopal and Srirangam, Prakash. (2016) 3D imaging and quantification of porosity in electron beam welded dissimilar steel to Fe-Al alloy joints by X-ray tomography. Materials & Design, 96 . pp. 224-231. ISSN 0264-1275
Edmonds, A. M., Newton, Mark E., Martineau, P. M., Twitchen, D. J. and Williams, S. D.. (2008) Electron paramagnetic resonance studies of silicon-related defects in diamond. Physical Review B (Condensed Matter and Materials Physics), Vol.77 (No.24). ISSN 1098-0121
Efthymiadis, P., Dashwood, R., Shollock, B. A., Curry, L., Ghadbeigi, H., Barrow, A. and Robertson, D.. (2016) Multiscale characterisation of the mechanical properties of austenitic stainless steel joints. Materials Science and Engineering: A, 676 . pp. 324-335. ISSN 0921-5093
Fan, X. and Loftus, M.. (2007) The influence of cutting force on surface machining quality. International Journal of Production Research , Vol.45 (No.4). pp. 899-911. ISSN 0020-7543
Fan, X., Masters, I., Roy, R. and Williams, D. (2008) Prediction of sheet metal assembly dimensional variation. In: 2nd CIRP Conference on Assembly Technologies and Sytems, Toronto, Ontario, Canada, Sep 21-23, 2008. Published in: Proceedings of the 2nd CIRP Conference on Assembly Technologies and Sytems
Fan, X., Masters, I., Roy, R. and Williams, D.. (2007) Simulation of distortion induced in assemblies by spot welding. Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture, Vol.221 (No.8). pp. 1317-1327. ISSN 0954-4054
Ferrer, Borja Ramis, Ahmad, Bilal, Vera, Daniel, Lobov, Andrei, Harrison, Robert and Lastra, Jose Luis Martinez. (2016) Product, process and resource model coupling for knowledge-driven assembly automation. Automatisierungstechnik, 64 (3). pp. 231-243. ISSN 0178-2312
Ferrie, John (1998) The development of process models : executive summary. PhD thesis, University of Warwick.
Gale, Stuart M. and Lewis, W. J. (Wanda J.). (2016) Patterning of tensile fabric structures with a discrete element model using dynamic relaxation. Computers & Structures, 169 . pp. 112-121. ISSN 0045-7949
Gao, Bo, He, Ligang and Jarvis, Stephen A.. (2016) Offload decision models and the price of anarchy in mobile cloud application ecosystems. IEEE Access, 3 . pp. 3125-3137. ISSN 2169-3536
Gibbons, Gregory John, Hansell, R. G., Thacker, G. and Arnett, G.. (2009) State of the art in low-cost, rapid composite forming tooling technologies. Journal of Advanced Materials, Vol.41 (No.2). pp. 5-19. ISSN 1070-9789
Gibbons, Gregory John, Hansell, Robert G., Norwood, A. J. and Dickens, P. M.. (2003) Rapid laminated die-cast tooling. Assembly Automation, 23 (4). pp. 372-381. ISSN 0144-5154
Gibbons, Gregory John and Hansell, Robert George. (2008) Thermal-sprayed coatings on aluminium for mould tool protection and upgrade. Journal of Materials Processing Technology, Vol.204 (No.1-3). pp. 184-191. ISSN 0924-0136
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100
Gibbons, Gregory John, Williams, Reuben, Purnell, Phil and Farahi, Elham. (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. ISSN 1743-6761
Goodall, William Richard (1993) Scheduling and control in the batch process industry using hybrid knowledge based simulation. PhD thesis, University of Warwick.
Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.
University of Warwick (2014) Multilayer manufacturing method utilising mould. World International Property Organization no.WO2014/091197 A1 [Online]..
Green, Maxwell, Davies, Philip and Ng, Irene C. L. (2016) Two strands of servitization : a thematic analysis of traditional and customer co-created servitization and future research directions. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (04/16). (Unpublished)
Greenspan, Anna (2000) Capitalism's transcendental time machine. PhD thesis, University of Warwick.
Grimes, Roger, Jackson, M., Moorhouse, B. and Dashwood, R. J.. (2008) The manufacture of superplastic magnesium alloy sheet. Materialwissenschaft und Werkstofftechnik, Vol.39 (No.4-5). pp. 340-342. ISSN 0933-5137
Guo, Z., Tian, Yanling, Liu , C., Wang, F., Liu, Xianping, Shirinzadeh, B. and Zhang, D.. (2015) Design and control methodology of a 3-DOF flexure-based mechanism for micro/nano-positioning. Robotics and Computer-Integrated Manufacturing, 32 . pp. 93-105. ISSN 0736-5845
Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622.
Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.
Hajarnavis, Vivek and Young, K. (Ken). (2008) An investigation into programmable logic controller software design techniques in the automotive industry. Assembly Automation, Volume 28 (Number 1). pp. 43-54. ISSN 0144-5154
Haq, Izhar Ul, Masood, Tariq, Ahmad, Bilal, Harrison, Robert, Raza, Bagar and Monfared, Radmehr P. (2011) Product to process lifecycle management in assembly automation systems. In: 7th International Conference on Digital Enterprise Technology, Athens, Greece, 28-30 Sep 2011. Published in: Proceedings of DET2011 pp. 1-11.
Hartwell, Ian and Marco, James. (2016) Management of intellectual property uncertainty in a remanufacturing strategy for automotive energy storage systems. Journal of Remanufacturing, 6 (1). ISSN 2210-464X
Hayes, Jonathan (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.
Hazra, S. (Sumit), Roya, R., Williams, D., Aylmoreb, R. and Hollingdale, D. (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, Volume 213 . pp. 2049-2063. ISSN 0924-0136
Hazra, S. (Sumit), Williams, D., Roy, R., Aylmore, R., Allen, M. and Hollingdale, D. (2011) Predicting the occurrence of cosmetic defects in automotive skin panels. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 253-257.
Hazra, S. (Sumit), Williams, D., Roy, R., Aylmore, R. and Smith, A. (2009) Forming parameter sensitivity. In: International Deep-Drawing Research Group Annual Conference '09, Golden, CO, U.S.A., Jun 1-3, 2009. Published in: Proceedings of the International Deep-Drawing Research Group Annual Conference '09 pp. 295-306.
He, Xiaocong, Pearson, Ian T. and Young, Ken (2006) Free vibration characteristics of SPR joints. In: 8th Biennial Conference on Engineering Systems Design and Analysis, Turin, ITALY, JUL 04-07, 2006. Published in: Proceedings of the 8th Biennial Conference on Engineering Systems Design and Analysis, Vol 3 pp. 159-167.
Hill, J. F., Morris, C. and Gabriel, R.. (2007) An approach to the dynamic detection of outliers in electronics production. International Journal of Production Research , Vol.45 (No.3). pp. 765-778. ISSN 0020-7543
Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.
Hu, Xiao-Bing, Wang, Ming, Ye, Qian, Han, Zhangan and Leeson, Mark S.. (2014) Multi-objective new product development by complete Pareto front and ripple-spreading algorithm. Neurocomputing , Volume 142 . pp. 4-15. ISSN 0925-2312
Huang, T., Wang, P. F., Mei, J. P., Zhao, X. M. and Chetwynd, D. G.. (2007) Time minimum trajectory planning of a 2-DOF translational parallel robot for pick-and-place operations. CIRP Annals - Manufacturing Technology, Volume 56 (Number 1). pp. 365-368. ISSN 0007-8506
Huang, T. and Whitehouse, D. J. (David J.). (1999) Cutting force formulation of taper end-mills using differential geometry. Precision Engineering, Vol.23 (No.3). pp. 196-203. ISSN 0141-6359
Huang, Tian, Wang, P. F., Zhao, X. M. and Chetwynd, D. G.. (2010) Design of a 4-DOF hybrid PKM module for large structural component assembly. CIRP Annals - Manufacturing Technology, Vol.59 (No.1). pp. 159-162. ISSN 0007-8506
Huang, Wei and Chen, Bo. (2007) Scheduling of batch plants: constraint-based approach and performance investigation. International Journal of Production Economics, Vol.105 (No.2). pp. 425-444. ISSN 0925-5273
Huang, Yingping, McMurran, Ross, Amor-Segan, Mark, Dhadyalla, Gunwant, Jones, R. Peter, Bennett, Peter, Mouzakitis, Alexandros and Kieloch, Jan. (2010) Development of an automated testing system for vehicle infotainment system. International Journal of Advanced Manufacturing Technology, Vol.51 (No.1-4). pp. 233-246. ISSN 0268-3768
Huang, Yingping, McMurran, Ross, Dhadyalla, Gunwant and Jones, P. (Peter), Dr.. (2008) Probability based vehicle fault diagnosis : Bayesian network method. Journal of Intelligent Manufacturing, Vol.19 (No.3). pp. 301-311. ISSN 0956-5515
Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.
Izquierdo, L. E., Hu, S. Jack, Du, Hao, Jin, Ran, Jee, Haeseong and Shi, Jianjun. (2009) Robust fixture layout design for a product family assembled in a multistage reconfigurable line. Journal of Manufacturing Science and Engineering, Vol.131 (No.4). Article no. 041008. ISSN 1087-1357
Jahdi, Saeed, Alatise, Olayiwola M., Ran, Li and Mawby, P. A. (Philip A.). (2015) Analytical modeling of switching energy of silicon carbide Schottky diodes as functions of dIDS/dt and temperature. IEEE Transactions on Power Electronics, 30 (6). pp. 3345-3355. ISSN 0885-8993
Jiang, X., Scott, P. J. and Whitehouse, D. J. (David J.). (2007) Freeform surface characterisation - a fresh strategy. CIRP Annals, Volume 56 (Number 1). pp. 553-556. ISSN 0007-8506
Jiang, X. and Whitehouse, D. J. (David J.) (2006) Miniaturized optical measurement methods for surface nanometrology. In: 56th General Assembly of CIRP, Kobe, JAPAN, AUG 20-26, 2006. Published in: CIRP ANNALS-MANUFACTURING TECHNOLOGY, 55 (1). pp. 577-580.
Jones, Jason Blair (2013) Investigation of laser printing for 3D printing and additive manufacturing. PhD thesis, University of Warwick.
Jones, Jason Blair, Wimpenny, D. I. and Gibbons, Gregory John. (2015) Additive manufacturing under pressure. Rapid Prototyping Journal, 21 (1). pp. 89-97. ISSN 1355-2546
Jones, Jeffrey Alun and Warrington, Les. (2010) Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives. Institution of Mechanical Engineers. Proceedings. Part O: Journal of Risk and Reliability, Vol.224 (No.2). pp. 105-112. ISSN 1748-006X
Kaniappan Chinnathai, Malarvizhi, Alkan, Bugra and Harrison, Robert (2017) Convertibility evaluation of automated assembly system designs for high variety production. In: 27th CIRP Design 2017, Cranfield University, 10-12 May 2017. Published in: Procedia CIRP (In Press)
King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.
Kirwan, Kerry (2010) High value innovation – credit cards to racing cars. In: PDM 2010 Exhibition and Conference, Telford International Centre, Telford, U.K., May 18-20, 2010
Kirwan, Kerry (2011) Lean, mean and green. In: 19th Bioenvironmental Polymer Society Annual Meeting, Vienna, Austria, 28-30 Sep 2011. Published in: Abstracts of Talks from the 19th Bioenvironmental Polymer Society Annual Meeting (KL-12).
Kirwan, Kerry and Coles, Stuart R. (2011) Wealth out of waste. In: 4th International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 7-8, 2011
Kirwan, Kerry, Coles, Stuart R., Clark, A. J. (Andrew J.), Pink, David, Barker, Guy C., Jacobs, Daniel K. and Makenji, Kylash (2008) A novel approach to developing crop-based products. In: 3rd International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 3-4, 2008
Kirwan, Kerry and Maggs, Steven J. (2011) Lean, mean and green. In: 4th International Seminar on Biodegradable Polymers, Valencia, Spain, Mar 7-8, 2011
Kirwan, Kerry, Maggs, Steven J. and Wood, Benjamin M. (2009) Motorsport as a 'vehicle' for technology transfer and public engagement with sustainable materials – a case study. In: 5th International Conference on Environmental, Cultural, Economic and Social Sustainability, University of Technology, Mauritius, Jan 5-7, 2009. Published in: Proceedings of the 5th International Conference on Environmental, Cultural, Economic and Social Sustainability
Koncsag, Claudia I., Eastwood, Daniel C. and Kirwan, Kerry. (2011) Recovering low molecular weight extractives from degraded straw by oyster mushroom at the farm scale for high value use. Biomass & Bioenergy, Vol.35 (No.7). pp. 3276-3279. ISSN 1873-2909
Kong, Zhenyu, Ceglarek, Darek and Huang, Wenzhen. (2008) Multiple fault diagnosis method in multistation assembly processes using orthogonal diagonalization analysis. Journal of Manufacturing Science and Engineering, Vol.130 (No.1). ISSN 1087-1357
Kostryzhev, A. G., Slater, Carl, Marenych, O. O. and Davis, Claire L.. (2016) Effect of solidification rate on microstructure evolution in dual phase microalloyed steel. Scientific Reports, 6 . 35715. ISSN 2045-2322
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, D. R. and Hutchins, David A.. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. ISSN 1932-6203
Lemire, Beverly and Riello, Giorgio (2006) East and west: textiles and fashion in Eurasia in the early modern period. Working Paper. London: Department of Economic History, London School of Economics and Political Science. Global Economic History Network (GEHN) (22).
Li, K. H., Lee, S. F. , Li, C. K. and Lu, Dawei. (2005) Evaluation of total throughput time for an electronic production line by simulation and fuzzy pert network. Journal of Advanced Manufacturing Systems, Vol. 4 (No. 2). pp. 195-208. ISSN 02196867
Li, Z., Izquierdo, L. E., Kokkolaras, M., Hu, S. J. and Papalambros, Panos Y. (2008) Multiobjective optimization for integrated tolerance allocation and fixture layout design in multistation assembly. Journal of Manufacturing Science and Engineering, Volume 130 (Number 4). 0445011-0445016. ISSN 1087-1357
Linhart, W. M., Rajpalke, M. K., Buckeridge, John, Murgatroyd, P. A. E., Bomphrey, J. J., Alaria, J., Catlow, C. R. A., Scanlon, D. O., Ashwin, M. J. and Veal, T. D. (Tim D.). (2016) Band gap reduction in InNxSb1-x alloys : optical absorption, k · P modeling, and density functional theory. Applied Physics Letters, 109 (13). 132104. ISSN 0003-6951
Liu, A. Y., Sun, C., Markevic, V. P., Peaker, A. R., Murphy, John D. and Macdonald, D. . (2016) Gettering of interstitial iron in silicon by plasma enhanced chemical vapour deposited silicon nitride films. Journal of Applied Physics, 120 (19). 193103. ISSN 0021-8979
Liu, Haitao, Huang, Tian, Kecskeméthy, Andrés and Chetwynd, D. G.. (2014) A generalized approach for computing the transmission index of parallel mechanisms. Mechanism and Machine Theory, 74 . pp. 245-256. ISSN 0094-114X
Liu, Jun, Strangwood, M., Davis, C. L. and Parker, J.. (2015) Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors. Materials Science and Technology, 31 (9). pp. 1042-1050. ISSN 0267-0836
Liu, X. and Piotter, V.. (2007) Mapping micro-mechanical properties of carbon-filled polymer composites by TPM. Precision Engineering, Vol.31 (No.2). pp. 162-168. ISSN 0141-6359
Loose, Jean-Philippe, Zhou, Qiang, Zhou, Shiyu and Ceglarek, Darek. (2010) Integrating GD&T into dimensional variation models for multistage machining processes. International Journal of Production Research , Vol.48 (No.11). pp. 3129-3149. ISSN 0020-7543
Loose, Jean-Philippe, Zhou, Shiyu and Ceglarek, Darek. (2008) Variation source identification in manufacturing processes based on relational measurements of key product characteristics. Journal of Manufacturing Science and Engineering, Vol.130 (No.3). ISSN 1087-1357
Love, James H., Roper, Stephen and Vahter, Priit. (2014) Dynamic complementarities in innovation strategies. Research Policy, 43 (10). pp. 1774-1784. ISSN 0048-7333
Lu, Dawei (1998) Reinvestigation of Taguchi Loss Function and tolerance design using fuzzy approximation. In: EUROFIT ’98 , Aachen, Germany , September. Published in: Proceedings of EUROFIT ’98, Vol.3
Lu, Dawei (1990) The role of machine vision in the development of an intelligent robot assembly system. In: 23rd International Symposium of Automotive Technology and Automation (ISATA), Vienna, Austria, 3rd-7th December 1990. Published in: Proceedings of the 23rd International Symposium of Automotive Technology and Automation (ISATA) pp. 99-108. (Unpublished)
Lu, Dawei and Antony, Jiju. (2002) Optimization of multiple responses using a fuzzy-rule based inference system. International Journal of Production Research , Vol. 40 (No. 7). pp. 1613-1625. ISSN 0020-7543
Lu, Dawei and Wang, Ming-Shou . (2011) Exploring the steel bar logistics value chain in China. Materials Science Forum, Vol.697-698 . pp. 570-575. ISSN 0255-5476
Makenji, Kylash and Cherrington, Ruth (2014) Plastic trim. In: Encyclopedia of Automotive Engineering. John Wiley & Sons, Ltd., pp. 1-6. ISBN 9780470974025
Maropoulos, P. G. and Ceglarek, Darek (2010) Design verification and validation in product lifecycle. In: 60th General Assembly of CIRP, Pisa, Italy, 22-28 Aug 2010. Published in: CIRP Annals - Manufacturing Technology, Vol.59 (No.2). pp. 740-759.
Marsden, Alexander J., Brommer, Peter, Mudd, James J., Dyson, Mark Adam, Cook, Robert M., Asensio, María, Avila, José, Levy, Ana, Sloan, Jeremy, Quigley, David (Researcher in physics), Bell, Gavin R. and Wilson, Neil R.. (2015) Effect of oxygen and nitrogen functionalization on the physical and electronic structure of graphene. Nano Research . pp. 1-16. ISSN 1998-0124
Martin, C., Keast, John and James-Moore, Mike (2010) The development of a tool and methodology for identifying and classifying waste within new product development. In: International Conference on Advances in Production Management Systems (APMS 2010), Cernobbio, Lake Como, Italy, Sep 24-26, 2010. Published in: APMS 2010 International Conference Advances in Production Management Systems Book of Abstracts p. 51.
Masters, I., Williams, D. and Roy, R. (2009) Modelling springback. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR09) pp. 360-365.
Meredith, James O., Coles, Stuart R., Powe, Richard, Collings, Ed, Cozien-Cazuc, Sophie, Weager, Brendon, Müssig, Jorg and Kirwan, Kerry. (2013) On the static and dynamic properties of flax and Cordenka epoxy composites. Composites Science and Technology, Volume 80 . pp. 31-38. ISSN 0266-3538
Mishra, Nishikant, Choudhary, A. K. and Tiwari, M. K.. (2008) Modeling the planning and scheduling across the outsourcing supply chain: a Chaos-based fast Tabu-SA approach. International Journal of Production Research , Vol.46 (No.13). pp. 3683-3715. ISSN 0020-7543
New, Steve, Hadi, Mohammed, Pickering, Sharon, Robertson, Eleanor, Morgan, Lauren J., Griffin, Damian R., Collins, Gary S., Rivero-Arias, Oliver, Catchpole, Ken and McCulloch, Peter. (2016) Lean participative process improvement : outcomes and obstacles in trauma orthopaedics. PLoS One, 11 (4). e0152360. ISSN 1932-6203
Ng, Tat Lun (1996) Improvement of product development cycle time and cost by applying concurrent integrated design and assembly planning : executive summary. PhD thesis, University of Warwick.
Niedderer , K., Ludden, G., Cain, Rebecca, Morris, A. G. (Alan George) and Freimane, A. (2016) Introduction : Design for behaviour change. In: DRS 2016 International Conference : Future–Focused Thinking 50th Anniversary International Conference, Brighton, UK, 27–30 Jun 2016. Published in: Proceedings of DRS 2016 International Conference: Future–Focused Thinking 50th Anniversary International Conference Brighton, UK, 27–30 June 2016, 4 pp. 1271-1275.
Norwood, A. J., Dickens, P. M., Soar, R. C., Harris, R., Gibbons, Gregory John and Hansell, R.. (2004) Analysis of cooling channels performance. International Journal of Computer Integrated Manufacturing , 17 (8). pp. 669-678. ISSN 0951-192X
Ortiz Gonzalez, Jose, Aliyu, A. M., Alatise, Olayiwola M., Castellazzi, A., Ran, Li and Mawby, P. A. (Philip A.). (2016) Development and characterisation of pressed packaging solutions for high-temperature high-reliability SiC power modules. Microelectronics Reliability, 64 . pp. 434-439. ISSN 0026-2714
Pal, Avishek (2015) Scalable design synthesis for automotive assembly system. PhD thesis, University of Warwick.
Parke, Laura, Hooper, Ian R., Hicken, Robert J., Dancer, Claire E. J., Grant, Patrick S., Youngs, Ian J., Sambles, Roy and Hibbins, Alaistair P.. (2013) Heavily loaded ferrite-polymer composites to produce high refractive index materials at centimetre wavelengths. APL Materials, Volume 1 (Number 4). Article number 042108.
Parthasarathi , Prasannan and Riello, Giorgio (2012) From India to the world : cotton and fashionability. In: Trentmann, Frank, (ed.) The Oxford Handbook of the History of Consumption. Oxford Handbooks in History . Oxford : Oxford University Press. ISBN 9780199561216
Pashby, I. R., Barnes, Stuart and Bryden, B. G.. (2003) Surface hardening of steel using a high power diode laser. Journal of Materials Processing Technology, Volume 139 (Number 1-3). pp. 585-588. ISSN 0924-0136
Phoomboplab, Tirawat (2012) Self-resilient production systems : framework for design synthesis of multi-station assembly systems. PhD thesis, University of Warwick.
Phoomboplab, Tirawat and Ceglarek, Darek. (2007) Design synthesis framework for dimensional management in multistage assembly system. CIRP Annals - Manufacturing Technology, Vol.56 (No.1). pp. 153-158. ISSN 0007-8506
Pickardt, Christoph W. (2013) Evolutionary methods for the design of dispatching rules for complex and dynamic scheduling problems. PhD thesis, University of Warwick.
Pickardt, Christoph W. and Branke, Jürgen. (2012) Setup-oriented dispatching rules – a survey. International Journal of Production Research , Vol.50 (No.20). pp. 5823-5842. ISSN 0020-7543
Pickardt, Christoph W., Branke, Jürgen, Hildebrandt, Torsten, Heger, Jens and Scholz-Reiter, Bernd (2010) Generating dispatching rules for semiconductor manufacturing to minimize weighted tardiness. In: 2010 Winter Simulation Conference, Baltimore, MD, 05-08 Dec 2010 . Published in: Proceedings of the 2010 Winter Simulation Conference (WSC) pp. 2504-2515.
Pimentel, Ernani Falcao (1996) A two-pass scheduling method using discrete event simulation. PhD thesis, University of Warwick.
Prakash, Prakash, Izquierdo, L. E. and Ceglarek, Darek. (2009) Functional process adjustments to reduce No-Fault-Found product failures in service caused by in-tolerance faults. CIRP Annals - Manufacturing Technology, Vol.58 (No.1). pp. 37-40. ISSN 0007-8506
Raath, Neill D. (2014) Failure prediction of spot welded boron steel. PhD thesis, University of Warwick.
Rahnama, Alireza, Dashwood, R. J. and Seetharaman, Sridhar. (2017) A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel. Computational Materials Science, 126 . pp. 152-159. ISSN 0927-0256
Riello, Giorgio. (2007) Nature, production and regulation in eighteenth-century Britain and France : the case of the leather industry. Historical Research, Vol.81 (No.211). pp. 78-99. ISSN 0950-3471
Riello, Giorgio (2005) Review of Manufacturing revolution : the intellectual origins of early American industry, by Peskin, L.A. Business History, Vol.47 (No.3). pp. 485-487. ISSN 0007-6791
Riello, Giorgio (2011) Review of The British cotton trade, 1660-1815, by Lemire, B. Textile: The Journal of Cloth and Culture, Vol.9 (No.2). pp. 256-259. ISSN 14759756
Riemer, O (1999) The characterisation of small water droplets for assessing surface cleaning. In: 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology, Bremen, GERMANY, MAY 31-JUN 04, 1999. Published in: PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2 pp. 399-402.
Riemer, O (1999) The repeatability of contact-gauge probes against engineering surfaces. In: 1st International Conference and General Meeting of the European-Society-for-Precision-Engineering and Nanotechnology, Bremen, GERMANY, MAY 31-JUN 04, 1999. Published in: PRECISION ENGINEERING, NANOTECHNOLOGY, VOL. 2 pp. 403-406.
Roy, R. and James-Moore, Mike (2010) Lean product introduction. In: Shyy, Wei and Blockley, Richard, (eds.) Encyclopedia of Aerospace Engineering. Hoboken, NJ, U.S.A.: John Wiley & Sons, Inc.. ISBN 9780470686652
Sackett, P. J., Al-Gaylani, M. F., Tiwari, A. and Williams, D. (2006) A review of data visualization: opportunities in manufacturing sequence management. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 19 (7). pp. 689-704. ISSN 0951-192X
Salaoru, Iulia, Zhou, Zuoxin, Morris, Peter and Gibbons, Gregory John. (2016) Inkjet printing of polyvinyl alcohol multilayers for additive manufacturing applications. Journal of Applied Polymer Science, 133 (25). 43572. ISSN 0021-8995
Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.
Satti, Teysseer, Young, Ken and Grover, Samuel. (2009) Detecting catastrophic failure events in large-scale milling machines. International Journal of Machine Tools and Manufacture, Vol.49 (No.14). pp. 1104-1113. ISSN 0890-6955
Shukla, Nagesh, Keast, John, Lahiri, Sudakshina and Ceglarek, Darek (2009) Role activity diagram-based workflow modelling of imaging service delivery process in radiology. In: The 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, Coventry, U.K., Sep 8-10, 2009. Published in: Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09) pp. 283-291.
Silva, Francois, Achard, Jocelyn, Bonnin, X., Brinza, O., Michau, Armelle, Secroun, Aurelia, De Corte, Katrien, Felton, S. (Solveig), Newton, Mark E. and Gicquel, Alix (2008) Single crystal CVD diamond growth strategy by the use of a 3D geometrical model : Growth on (113) oriented substrates. In: 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides and Silicon Carbide, Berlin, Germany, Sep 09-14, 2007. Published in: Diamond and Related Materials, Volume 17 (Numbers 7-10, Special issue SI). pp. 1067-1075.
Simmons, Jonathan A., Sprittles, James E. and Shikhmurzaeva, Yulii D.. (2015) The formation of a bubble from a submerged orifice. European Journal of Mechanics B/Fluids, 53 . pp. 24-36. ISSN 0997-7546
Singh, A., Cooper, D. E., Blundell, N., Pratihar, D. K. and Gibbons, Gregory John. (2014) Modelling of weld-bead geometry and hardness profile in laser welding of plain carbon steel using neural networks and genetic algorithms. International Journal of Computer Integrated Manufacturing , Volume 27 (Number 7). ISSN 0951-192X
Slater, Carl, Spooner, Stephen, Davis, Claire L. and Sridhar, Seetharaman. (2016) Observation of the reversible stabilisation of liquid phase iron during nitriding. Materials Letters, 173 . pp. 98-101. ISSN 0167-577X
Stadler, Christian. (2011) Process innovation and integration in process-oriented settings : the case of the oil industry. Journal of Product Innovation Management, 28 (s1). pp. 44-62. ISSN 0737-6782
Stanger, Jonathan, Tucker, Nick and Coles, Stuart R. (2008) Green industrialization for developing nations. In: 3rd International Conference on Sustainability Engineering and Science , Auckland, New Zealand, Dec 9-12, 2008. Published in: Proceedings of the 3rd International Conference on Sustainability Engineering and Science
Stanton, M., Bhattacharya, R., Dargue, I., Aylmore, R. and Williams, G. (2011) Hole Expansion of Aluminum Alloys for the Automotive Industry. In: The 14th International ESAFORM Conference on Material Forming - ESAFORM 2011, Queen's University Belfast, UK, Apr 27-29, 2011. Published in: AIP Conference Proceedings, Vol.1353 pp. 1488-1493.
Stephenson, David (2015) Design and simulation of nanofluidic branching betworks. PhD thesis, University of Warwick.
Stoneman, P. and Battisti, Giuliana. (1997) Intra-firm diffusion of new technologies : the neglected part of technology transfer. International Journal Of Industrial Engineering-Applications And Practice, 4 (4). pp. 270-282. ISSN 1072-4761
Swift, Mark P. (2005) The development and implementation of a collaborative architecture for SMEs : executive summary. PhD thesis, University of Warwick.
Taylor, Celia A. (2016) Cyclical quality assurance of examinations is critical but causality needs to be attributed carefully. Education for Primary Care, 27 (4). pp. 304-305. ISSN 1473-9879
Taylor, Phillip, Griffiths, Nathan, Bhalerao, Abhir, Sarabjot, Anand, Popham, Thomas, Zhou, Xu and Gelencser, Adam. (2016) Data mining for vehicle telemetry. Applied Artificial Intelligence, 30 (3). pp. 233-256. ISSN 0883-9514
Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.
Thornby, John Albert, MacKay, R. S. and Williams, M. A.. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. ISSN 0272-4960
Tolio, T., Ceglarek, Darek, ElMaraghy, H. A., Fischer, A., Hu, S. J., Laperriere, L., Newman, S. T. and Vancza, J.. (2010) SPECIES-Co-evolution of products, processes and production systems. CIRP Annals - Manufacturing Technology, Vol.59 (No.2). pp. 672-693. ISSN 0007-8506
Vasconcelos, Bernardo Jose Calafate de (1982) Improvements to stochastic stock control decisions. PhD thesis, University of Warwick.
Vernon, Guy Mark (2000) Work humanization: comparative historical developments in the manufacturing sectors of advanced capitalist societies, 1960-1995. PhD thesis, University of Warwick.
Veshagh, Alireza and Obagun, Adeola (2007) Survey of sustainable life cycle design and management. In: Takata, S. and Umeda, Y., (eds.) Survey of Sustainable Life Cycle Design and Management : Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007. Springer-Verlag, pp. 237-242. ISBN 9781846289347
Voisey, K. T., Folkes, J., Srithorn, J. and Hughes, Darren J.. (2014) Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V. Physics Procedia, Volume 56 . pp. 1277-1285. ISSN 1875-3892
Wang, H., Yang, J. and Ceglarek, Darek. (2009) A graph-based data structure for assembly dimensional variation control at a preliminary phase of product design. International Journal of Computer Integrated Manufacturing , Vol.22 (No.10). pp. 948-961. ISSN 0951-192X
Wang, Haixia and Ceglarek, Darek. (2009) Variation propagation modeling and analysis at preliminary design phase of multi-station assembly systems. Assembly Automation, Vol.29 (No.2). pp. 154-166. ISSN 0144-5154
Wang, Manxin, Liu, Haitao, Huang, Tian and Chetwynd, D. G.. (2015) Compliance analysis of a 3-SPR parallel mechanism with consideration of gravity. Mechanism and Machine Theory, 84 . pp. 99-112. ISSN 0094-114X
Wang, Qiangqiang, Zhang, Lifeng and Sridhar, Seetharaman. (2016) Modeling on fluid flow and inclusion motion in centrifugal continuous casting strands. Metallurgical and Materials Transactions B, 47 (4). pp. 2623-2642. ISSN 1073-5615
Wang, YouYu, Huang, Tian, Zhao, XueMan, Mei, Jiangping and Chetwynd, D. G.. (2008) A semi-analytical approach for stiffness modeling of PKM by considering compliance of machine frame with complex geometry. Chinese Science Bulletin, Volume 53 (Number 16). pp. 2565-2574. ISSN 1001-6538
Wang, Zhenbo, Xing, Wenxun and Chen, Bo. (2009) On-line service scheduling. Journal of Scheduling, Vol.12 (No.1). pp. 31-43. ISSN 1094-6136
Warwood, S. J. and Tennant, C. (2002) A TQM survey in the UK - a study of the factors involved in the successful implementation of total quality management in UK industry. In: 18th National Conference on Manufacturing Research, Leeds Metropolitan University, Leeds, England, 10-12 Sep 2002. Published in: Advances in Manufacturing Technology XVI pp. 565-570.
Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, Charles (2005) Tactility, craftsmanship and the NPI process. SAE International. (SAE Technical Papers).
Wen, Huii-I, Zhang, Shu-jun, Hapeshi, Kevin and Wang, Xiao-feng. (2008) An innovative methodology of product design from nature. Journal of Bionic Engineering, Volume 5 (Number 1). pp. 75-84. ISSN 1672-6529
Williams, D., Roy, R., Low, Margaret and Evans, R. (2008) Complexity management of UAV systems. In: 23rd International Conference on Unmanned Air Vehicle Systems 2008, Bristol, U.K., Apr 7-9, 2008. Published in: Proceedings of the 23rd International Conference on Unmanned Air Vehicle Systems 2008, Vol.1 pp. 584-624.
Williams, M., Williams, M. A. (Mark A.) and Vosniakos, G. (1997) On reference modelling of integrated manufacturing systems using Object-Oriented Analysis (OOA). In: IFIP Transactions B-17, Information Infrastructure Systems For Manufacturing. UNSPECIFIED, pp. 91-102. ISBN 0444818502
Williams, M. A. (Mark A.) and Kochhar, A. K.. (2000) New product introduction practices in the British manufacturing industry. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214 (10). pp. 853-863. ISSN 0954-4054
Williams, M. A. (Mark A.), Kochhar, A. K. and Tennant, C.. (2007) An object-oriented reference model of the fuzzy front end of the new product introduction process. International Journal of Advanced Manufacturing Technology, Vol.34 (No.7-8). pp. 826-841. ISSN 0268-3768
Wimpenny, D. I., Bryden, B. and Pashby, I. R. (2003) Rapid laminated tooling. In: 9th International Manufacturing Conference, Hong Kong, China, 16-17 Aug 2000. Published in: Journal of Materials Processing Technology, 138 (1-3). pp. 214-218.
Winch, Graham (1992) The implementation of CAD/CAM systems in the metalworking industries. PhD thesis, University of Warwick.
Wood, Benjamin M., Coles, Stuart R., Maggs, Steven J., Meredith, James O. and Kirwan, Kerry. (2011) Use of lignin as a compatibiliser in hemp/epoxy composites. Composites Science and Technology, Vol.71 (No.16). pp. 1804-1810. ISSN 0266-3538
Woolman, Tim and Veshagh, Alireza (2007) Development of a management tool for assessing environmental performance in SMEs' design and production. In: Takata, S. and Umeda, Y., (eds.) Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses : Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th–13th, 2007. Heidelberg : Springer-Verlag, pp. 383-388. ISBN 9781846289347
Yang, Jia (Researcher in engineering) (2013) Melting and solidification models and thermal characteristics of microencapsulated phase change materials. PhD thesis, University of Warwick.
Zhang, Jiayi, Ahmad, Bilal, Vera, Daniel and Harrison, Robert (2016) Ontology based semantic-predictive model for reconfigurable automation systems. In: IEEE 14th International Conference on Industrial Informatics, Poitiers, France, 18-21 Jul 2016 (In Press)
Zhou, L., Liu, Jun, Hao, X. J., Strangwood, M., Peyton, A. J. and Davis, Claire L.. (2014) Quantification of the phase fraction in steel using an electromagnetic sensor. NDT & E International, 67 . pp. 31-35. ISSN 0963-8695
Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2016) Development of a direct feed fused deposition modelling technology for multi-material manufacturing. In: 19th International Conference on Material Forming – ESAFORM 2016, Nantes, France, 26-29 Apr 2016. Published in: ESAFORM 2016 : Proceedings of the 19th international ESAFORM conference on material forming 190004 .