Journal Article

Atari, M. I. (Mohammed Isam), Chappell, M. J. (Michael J.), Errington, Rachel J., Smith, Paul J. (Paul James), 1953- and Evans, N. D.. (2011) Kinetic modelling of the role of the aldehyde dehydrogenase enzyme and the breast cancer resistance protein in drug resistance and transport. Computer Methods and Programs in Biomedicine, Vol.104 (No.2). pp. 93-103. ISSN 01692607

Bavelis, Konstantinos and Mias, Christos. (2010) Vector fitting realisation of exact time domain modal nonreflecting boundary condition. Electronics Letters, Vol.46 (No.11). pp. 760-761. ISSN 0013-5194

Bhagat, R. (Rohit), Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D. (Douglas), Jackson, B. K., Rao, K. K. (Kartik K.) and Dashwood, R. J.. (2010) In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2. Acta Materialia, Vol.58 (No.15). pp. 5057-5062. ISSN 1359-6454

Bhagat, R. (Rohit), Jackson, M., Inman, D. and Dashwood, R. J.. (2008) Production of Ti-W alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.156 (No.1). E1-E7. ISSN 0013-4651

Chacko, Salvio, Chung, Yongmann M., Choi, S. K., Nam, H. Y. and Jeong, H. Y.. (2011) Large-eddy simulation of thermal striping in unsteady non-isothermal triple jet. International Journal of Heat and Mass Transfer, Vol.54 (No.19-20). pp. 4400-4409. ISSN 00179310

Chapman, James D., Chappell, M. J. (Michael J.) and Evans, N. D.. (2011) The use of a formal sensitivity analysis on epidemic models with immune protection from maternally acquired antibodies. Computer Methods and Programs in Biomedicine, Vol.104 (No.2). pp. 37-49. ISSN 01692607

Chappell, M. J. (Michael J.), Evans, N. D., Errington, Rachel J., Khan, I. A., Campbell, L., Ali, Reza, Godfrey, Keith and Smith, Paul J. (Paul James), 1953-. (2008) A coupled drug kinetics-cell cycle model to analyse the response of human cells to intervention by topotecan. Computer Methods and Programs in Biomedicine, Vol.89 (No.2). pp. 169-178. ISSN 0169-2607

Chen, Yangzhi, Liu, X., Chetwynd, D. G. (Derek G.), 1948- and Huang, P.. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. ISSN 0094-114X

Cherrington, R., Goodship, V., Meredith, James O., Wood, Benjamin M., Coles, Stuart R., Vuillaume, A., Feito-Boirac, A., Spee, F. and Kirwan, Kerry. (2012) Producer responsibility : defining the incentive for recycling composite wind turbine blades in Europe. Energy Policy, Vol.47 . pp. 13-21. ISSN 0301-4215

Das Choudhury, Sruti and Tjahjadi, Tardi. (2012) Silhouette-based gait recognition using Procrustes shape analysis and elliptic Fourier descriptors. Pattern Recognition, Vol.45 (No.9). pp. 3414-3426. ISSN 0031-3203

Dixon, S., Burrows, S. E. (Susan E.), Dutton, B. (Ben) and Fan, Y.. (2011) Detection of cracks in metal sheets using pulsed laser generated ultrasound and EMAT detection. Ultrasonics, Vol.51 (No.1). pp. 7-16. ISSN 0041-624X

Du, Y. P., Zhao, Chang-Ying, Tian, Yuan and Qu, Z. G.. (2012) Analytical considerations of flow boiling heat transfer in metal-foam filled tubes. Heat and Mass Transfer, Vol.48 (No.1). pp. 165-173. ISSN 0947-7411

Dudin, Petr V., Snowden, Michael E., Macpherson, Julie V. and Unwin, Patrick R.. (2011) Electrochemistry at nanoscale electrodes : individual single-walled carbon nanotubes (SWNTs) and SWNT-templated metal nanowires. ACS Nano, Volume 5 (Number 12). pp. 10017-10025. ISSN 1936-0851

Duggento, Andrea, Luchinsky, Dmitri G., Smelyanskiy, Vadim N., Khovanov, I. A. and McClintock, P. V. E.. (2008) Inferential framework for nonstationary dynamics. II, Application to a model of physiological signaling. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), Vol.77 (No.6). Article: 061106. ISSN 1539-3755

Dutton, B. (Ben), Clough, A. R., Rosli, M. H. and Edwards, R. S. (Rachel S.). (2011) Non-contact ultrasonic detection of angled surface defects. NDT & E International, Vol.44 (No.4). pp. 353-360. ISSN 0963-8695

Edwards, R. S. (Rachel S.), Sophian, A., Dixon, S. and Tian, G. Y.. (2008) Data fusion for defect characterisation using a dual probe system. Sensors and Actuators A: Physical, Vol.144 (No.1). pp. 222-228. ISSN 0924-4247

Evans, N. D.. (2011) Optimal oral drug dosing via application of the contraction mapping theorem. Biomedical Signal Processing and Control, Vol.6 (No.1). pp. 57-63. ISSN 1746-8094

Evans, T. S., Quarini, Giuseppe Leonardo and Shire, G. S. F.. (2008) Investigation into the transportation and melting of thick ice slurries in pipes. International Journal of Refrigeration, Vol.31 (No.1). pp. 145-151. ISSN 0140-7007

Evernden, M. C. and Mottram, J. Toby (James Toby), 1958-. (2011) Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering: an international journal, Vol.14 (No.6). pp. 991-1004. ISSN 1369-4332

Gardner, L. (Leroy), Chan, T. M. and Abela, J. M.. (2011) Structural behaviour of elliptical hollow sections under combined compression and uniaxial bending. Advanced Steel Construction, Vol.7 (No.1). pp. 86-113. ISSN 1816-112X

Gibbons, Gregory John, 1970-, Williams, Reuben, Purnell, Phil and Farahi, Elham. (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. ISSN 1743-6761

Hazra, S. (Sumit), Williams, D., Roy, R., Aylmore, R. and Smith, A.. (2011) Effect of material and process variability on the formability of aluminium alloys. Journal of Materials Processing Technology, Vol.211 (No.9). pp. 1516-1526. ISSN 0924-0136

Hirayama, Motoi, Bell, Gavin R. and Tsukamoto, Shiro. (2011) Initial stages of MnAs heteroepitaxy and nanoisland growth on GaAs(110) and (001) surfaces. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, Vol.29 (No.4). 04D109. ISSN 10711023

Huang, Tian, Wang, P. F., Zhao, X. M. and Chetwynd, D. G. (Derek G.), 1948-. (2010) Design of a 4-DOF hybrid PKM module for large structural component assembly. CIRP Annals - Manufacturing Technology, Vol.59 (No.1). pp. 159-162. ISSN 0007-8506

Hughes, Darren J., Heeley, E. L. and Curfs, C.. (2011) A non-destructive method for the measurement of residual strains in semi-crystalline polymer components. Materials Letters, Vol.65 (No.3). pp. 530-533. ISSN 0167-577X

Jewkes, James, 1978-, Chung, Yongmann M. and Carpenter, P. W. (Peter William), 1942-. (2011) Modifications to a turbulent inflow generation method for boundary-layer flows. AIAA Journal, Vol.49 (No.1). pp. 247-250. ISSN 0001-1452

Jones, Benoît. (2010) Low-volume-loss tunnelling for London ring main extension. Proceedings of the ICE - Geotechnical Engineering, Vol.163 (No.3). pp. 167-185. ISSN 1353-2618

Jones, Benoît. (2011) Underpassing of Angel Underground by London ring main extension tunnel. International Journal of Geoengineering Case Histories, Vol.2 (No.2). pp. 105-126. ISSN 1790-2045

Jones, Benoît, Thomas, A. H. (Alun H.), Hsu, Y. S. (Yu Sheng) and Hilar, M.. (2008) Evaluation of innovative sprayed-concrete-lined tunnelling. Proceedings of the ICE - Geotechnical Engineering, Vol.161 (No.3). pp. 137-149. ISSN 1353-2618

Jones, Jeffrey Alun, 1962- and Warrington, Les. (2010) Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives. Institution of Mechanical Engineers. Proceedings. Part O: Journal of Risk and Reliability, Vol.224 (No.2). pp. 105-112. ISSN 1748-006X

Karavasilis, Theodore L., Blakeborough, A. (Anthony) and Williams, Martin, 1962-. (2011) Development of nonlinear analytical model and seismic analyses of a steel frame with self-centering devices and viscoelastic dampers. Computers & Structures, Vol.89 (No.11-12). pp. 1232-1240. ISSN 0045-7949

Karavasilis, Theodore L., Makris, Nicos, Bazeos, Nikitas and Beskos, D. E.. (2010) Dimensional response analysis of multistorey regular steel MRF subjected to pulselike earthquake ground motions. Journal of Structural Engineering, Vol.136 (No.8). pp. 921-932. ISSN 0733-9445

Karavasilis, Theodore L., Ricles, James M., Sause, Richard and Chen, Cheng. (2011) Experimental evaluation of the seismic performance of steel MRFs with compressed elastomer dampers using large-scale real-time hybrid simulation. Engineering Structures, Vol.33 (No.6). pp. 1859-1869. ISSN 0141-0296

Karavasilis, Theodore L. and Seo, Choung-Yeol. (2011) Seismic structural and non-structural performance evaluation of highly damped self-centering and conventional systems. Engineering Structures, Vol.33 (No.8). pp. 2248-2258. ISSN 0141-0296

Karavasilis, Theodore L., Seo, Choung-Yeol and Makris, Nicos. (2011) Dimensional response analysis of bilinear systems subjected to non-pulselike earthquake ground motions. Journal of Structural Engineering, Vol.137 (No.5). pp. 600-606. ISSN 0733-9445

Koncsag, Claudia I., Eastwood, Daniel C., Collis, Alana, Coles, Stuart R., Clark, Andrew J., Kirwan, Kerry and Burton, Kerry S.. (2012) Extracting valuable compounds from straw degraded by Pleurotus ostreatus. Resources, Conservation and Recycling, Vol.59 . pp. 14-22. ISSN 0921-3449

Landa, P. S. (Polina Solomonovna), Khovanov, I. A. and McClintock, P. V. E.. (2008) Theory of stochastic resonance for small signals in weakly damped bistable oscillators. Physical Review E (Statistical, Nonlinear, and Soft Matter Physics), Vol.77 (No.1). Article: 011111. ISSN 1539-3755

Lewis, W. J. (Wanda J.). (2008) Computational form-finding methods for fabric structures. Proceedings of the ICE - Engineering and Computational Mechanics, Vol.161 (No.3). pp. 139-149. ISSN 1755-0777

Lewis, W. J. (Wanda J.). (2012) A mathematical model for assessment of material requirements for cable supported bridges: implications for conceptual design. Engineering Structures, Vol.42 . pp. 266-277. ISSN 1873-7323

Li, Chang-Tsun. (2012) Color-decoupled photo response non-uniformity for digital image forensics. IEEE Transactions on Circuits and Systems for Video Technology, Vol.22 (No.2). pp. 260-271.

Li, Dezhi, Han, Li, Thornton, M. and Shergold, M.. (2012) Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints. Materials Science and Engineering: A, Vol.558 . pp. 242-252. ISSN 09215093

Liu, X., Yue, Zhaoyang, Cai, Z., Chetwynd, D. G. (Derek G.), 1948- and Smith, S. T. (Stuart T.), 1961-. (2008) Quantifying touch-feel perception : tribological aspects. Measurement Science and Technology, Vol.19 (No.8). Article: 084007. ISSN 0957-0233

Metcalf, Steven John, Tamainot-Telto, Zacharie and Critoph, Robert E.. (2011) Application of a compact sorption generator to solar refrigeration: case study of Dakar (Senegal). Applied Thermal Engineering, Vol.31 (No.14-15). pp. 2197-2204. ISSN 1359-4311

Mottram, J. Toby (James Toby), 1958-. (2010) Prediction of net-tension strength for multirow bolted connections of pultruded material using the Hart-Smith semi-empirical modeling approach. Journal of Composites for Construction, Vol.14 (No.1). pp. 105-114. ISSN 1090-0268

Mottram, J. Toby (James Toby), 1958- and Zafari, B.. (2011) Pin-bearing strengths for bolted connections in fibre-reinforced polymer structures. Proceedings of the Institution of Civil Engineers: Structures and Buildings, Vol.164 (No.5). pp. 291-305. ISSN 0965-0911

Nguyen, T. T, Chan, T. M. and Mottram, J. Toby (James Toby), 1958-. (2013) Influence of boundary conditions and geometric imperfections on lateral–torsional buckling resistance of a pultruded FRP I-beam by FEA. Composite Structures, Volume 100 . pp. 233-242. ISSN 0263-8223

Pearson, Ian T. and Mottram, J. Toby (James Toby), 1958-. (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 1, Evaluation of key parameters. Computers & Structures, Vol.90-91 . pp. 76-88. ISSN 0045-7949

Pearson, Ian T. and Mottram, J. Toby (James Toby), 1958-. (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 2, Novel shell mesh to minimise analysis time. Computers & Structures, Vol.90-91 . pp. 89-96. ISSN 0045-7949

Rajpoot, Nasir M. (Nasir Mahmood) and Butt, Irfan T.. (2012) A multiresolution framework for local similarity based image denoising. Pattern Recognition, Vol.45 (No.8). pp. 2938-2951. ISSN 0031-3203

Robinson, James C. (James Cooper), 1969-. (2007) Parametrization of global attractors experimental observations and turbulence. Journal of Fluid Mechanics, Vol.57 . pp. 495-507. ISSN 0022-1120

Sheehan, T. (Therese), Dai, X. H., Chan, T. M. and Lam, Dennis. (2012) Structural response of concrete-filled elliptical steel hollow sections under eccentric compression. Engineering Structures, Vol.45 . pp. 314-323. ISSN 0141-0296

Shin, Dongjoe and Tjahjadi, Tardi. (2008) Local hull-based surface construction of volumetric data from silhouettes. IEEE Transactions on Image Processing, Vol.17 (No.8). pp. 1251-1260. ISSN 1057-7149

Shire, G. S. F., Quarini, Giuseppe Leonardo and Evans, T. S.. (2009) Pressure drop of flowing ice slurries in industrial heat exchangers. Applied Thermal Engineering, Vol.29 (No.8-9). pp. 1500-1506. ISSN 1359-4311

Shire, G. S. F., Quarini, Giuseppe Leonardo, Rhys, T. D. L. and Evans, T. S.. (2008) The anomalous pressure drop behaviour of ice slurries flowing through constrictions. International Journal of Multiphase Flow, Vol.34 (No.5). pp. 510-515. ISSN 0301-9322

Thomas, P. J. (Peter J.) and Linden, P. F.. (2010) Laboratory modelling of the effects of temporal changes of estuarine-fresh-water discharge rates on the propagation speed of oceanographic coastal currents. Journal of Fluid Mechanics, Vol.664 . pp. 337-347. ISSN 0022-1120

Tian, Yanling, Liu, X., Zhang, D. and Chetwynd, D. G. (Derek G.), 1948-. (2009) Dynamic modelling of the fidelity of random surface measurement by the stylus method. Wear, Vol.266 (No.5-6). pp. 555-559. ISSN 0043-1648

Tian, Yuan and Zhao, Chang-Ying. (2011) A numerical investigation of heat transfer in phase change materials (PCMs) embedded in porous metals. Energy, Vol.36 (No.9). pp. 5539-5546. ISSN 0360-5442

Turley, G. A., Ahmed, S. M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R.. (2011) Establishing a range of motion boundary for total hip arthroplasty. Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, Vol.225 (No.8). pp. 769-782. ISSN 2041-3033

Turley, G. A., Ahmed, Shahbaz M. Y., Williams, M. A. (Mark A.) and Griffin, Damian R.. (2012) Validation of the femoral anteversion measurement method used in imageless navigation. Computer Aided Surgery, Vol.17 (No.4). pp. 187-197. ISSN 1092-9088

Utili, S. and Crosta, G. B.. (2011) Modeling the evolution of natural cliffs subject to weathering. 1, Limit analysis approach. Journal of Geophysical Research, Vol.116 (Number F1). Article: F01016. ISSN 0148-0227

Utili, S. and Crosta, G. B.. (2011) Modeling the evolution of natural cliffs subject to weathering. 2, Discrete element approach. Journal of Geophysical Research, Vol.116 (No.F1). Article: F01017. ISSN 0148-0227

Wang, B. X., Bhagat, R. (Rohit), Lan, X. Z. and Dashwood, R. J.. (2011) Production of Ni-35Ti-15Hf alloy via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.158 (No.10). D595-D602. ISSN 0013-4651

Wang, L. W., Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E. and Wang, R. Z.. (2010) Anisotropic thermal conductivity and permeability of compacted expanded natural graphite. Applied Thermal Engineering, Vol.30 (No.13). pp. 1805-1811. ISSN 1359-4311

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. ISSN 0950-3293

Yates, James W. T., Evans, N. D. and Chappell, M. J. (Michael J.). (2009) Structural identifiability analysis via symmetries of differential equations. Automatica, Vol.45 (No.11). pp. 2585-2591. ISSN 0005-1098

Yin, Xiaokang, Hutchins, D. A., Diamond, G. G. and Purnell, P.. (2010) Non-destructive evaluation of concrete using a capacitive imaging technique : preliminary modelling and experiments. Cement and Concrete Research, Vol.40 (No.12). pp. 1734-1743. ISSN 0008-8846

Zafari, B. and Mottram, J. Toby (James Toby), 1958-. (2011) Affect of hot-wet aging on the pin-bearing strength of a pultruded material with polyester matrix. Journal of Composites for Construction . ISSN 1943-5614

Zhao, Chang-Ying, Lu, Wei and Tian, Yuan. (2010) Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs). Solar Energy, Vol.84 (No.8). pp. 1402-1412. ISSN 0038-092X

Zhou, Dan, Zhao, Chang-Ying and Tian, Yuan. (2012) Review on thermal energy storage with phase change materials (PCMs) in building applications. Applied Energy, Vol.92 . pp. 593-605. ISSN 03062619

Çelik, Turgay and Tjahjadi, Tardi. (2012) Adaptive colour constancy algorithm using discrete wavelet transform. Computer Vision and Image Understanding, Vol.116 (No.4). pp. 561-571. ISSN 1077-3142

Çelik, Turgay and Tjahjadi, Tardi. (2012) Automatic image equalization and contrast enhancement using Gaussian mixture modeling. IEEE Transactions on Image Processing, Vol.21 (No.1). pp. 145-156. ISSN 1057-7149

Çelik, Turgay and Tjahjadi, Tardi. (2011) Bayesian texture classification and retrieval based on multiscale feature vector. Pattern Recognition Letters, Vol.32 (No.2). pp. 159-167. ISSN 0167-8655

Çelik, Turgay and Tjahjadi, Tardi. (2011) Contextual and variational contrast enhancement. IEEE Transactions on Image Processing, Vol.20 (No.12). pp. 3431-3441. ISSN 1057-7149

Çelik, Turgay and Tjahjadi, Tardi. (2010) Image resolution enhancement using dual-tree complex wavelet transform. Geoscience and Remote Sensing Letters, Vol.7 (No.3). pp. 554-557. ISSN 1545-598X

Çelik, Turgay and Tjahjadi, Tardi. (2011) Multiscale texture classification and retrieval based on magnitude and phase features of complex wavelet subbands. Computers & Electrical Engineering, Vol.37 (No.5). pp. 729-743. ISSN 0045-7906

Çelik, Turgay and Tjahjadi, Tardi. (2009) Multiscale texture classification using dual-tree complex wavelet transform. Pattern Recognition Letters, Vol.30 (No.3). pp. 331-339. ISSN 0167-8655

Çelik, Turgay and Tjahjadi, Tardi. (2010) Unsupervised colour image segmentation using dual-tree complex wavelet transform. Computer Vision and Image Understanding, Vol.114 (No.7). pp. 813-826. ISSN 1077-3142

Živanović, Stana. (2012) Benchmark footbridge for vibration serviceability assessment under vertical component of pedestrian load. Journal of Structural Engineering, Vol.138 (No.10). pp. 1193-1202. ISSN 0733-9445

Živanović, Stana and Pavić, Aleksandar. (2009) Probabilistic modeling of walking excitation for building floors. Journal of Performance of Constructed Facilities, Vol.23 (No.3). pp. 132-143. ISSN 0887-3828

Živanović, Stana and Pavić, Aleksandar. (2011) Quantification of dynamic excitation potential of pedestrian population crossing footbridges. Shock and Vibration, Vol.18 (No.4). pp. 563-577. ISSN 1070-9622

Živanović, Stana, Pavić, Aleksandar and Ingólfsson, Einar Thór. (2010) Modeling spatially unrestricted pedestrian traffic on footbridges. Journal of Structural Engineering, Vol.136 (No.10). pp. 1296-1308. ISSN 0733-9445

Živanović, Stana, Pavić, Aleksandar and Reynolds, Paul. (2007) Finite element modelling and updating of a lively footbridge : the complete process. Journal of Sound and Vibration, Vol.301 (No.1-2). pp. 126-145. ISSN 0022460X

Živanović, Stana, Pavić, Aleksandar and Reynolds, Paul. (2006) Modal testing and FE model tuning of a lively footbridge structure. Engineering Structures, Vol.8 (No.6). pp. 857-868. ISSN 01410296

Živanović, Stana, Pavić, Aleksandar and Reynolds, Paul. (2005) Vibration serviceability of footbridges under human-induced excitation : a literature review. Journal of Sound and Vibration, Vol.279 (No.1-2). pp. 1-74. ISSN 0022460X

Conference Item

Davis, Neil D., Jones, Jeffrey Alun, 1962- and Warrington, Les (2003) A framework for documenting and analyzing life-cycle costs using a simple network based representation. In: 49th Annual Reliability and Maintainability Symposium, Tampa, Florida, 27-30 January 2003 pp. 232-236.

Dutton, B. (Ben), Rosli, M. H. and Edwards, R. S. (Rachel S.) (2010) Defect feature extraction using surface wave interactions and time-frequency behavior. In: 36th Annual Review of Progress in Quantitative Nondestructive Evaluation, University of Rhode Island, Kingston, RI, Jul 26-31, 2009. Published in: AIP Conference Proceedings, Vol.1211 (No.1). pp. 647-654.

Edwards, R. S. (Rachel S.), Clough, A. R., Rosli, M. H., Hernandez-Valle, Francisco and Dutton, B. (Ben) (2011) Detection and characterisation of surface cracking using scanning laser techniques. In: International Congress on Ultrasonics (ICU 2011), University of Gdańsk, 5-8 September 2011

Edwards, R. S. (Rachel S.), Dutton, B. (Ben), Rosli, M. H. and Clough, A. R. (2011) Non-contact ultrasonic characterisation of angled surface defects. In: Review of Progress in Quantitative Nondestructive Evaluation, San Diego, California, 18–23 July 2010. Published in: AIP Conference Proceedings, Vol.1335 (No.1). pp. 257-264.

Rosli, M. H., Edwards, R. S. (Rachel S.), Dutton, B. (Ben), Johnson, C. G. (Colin G.) and Cattani, P. (2010) Identifying surface angled cracks on aluminium bar using EMATS and automated computer system. In: 36th Annual Review of Progress in Quantitative Nondestructive Evaluation, University of Rhode Island, Kingston, RI, Jul 26-31, 2009. Published in: AIP Conference Proceedings, Vol.1211 (No.1). pp. 1593-1600.

Yu, Guan, Li, Chang-Tsun and Hu, Yongjian (2012) Gait recognition under carrying condition : a static dynamic fusion method. In: Optics, Photonics, and Digital Technologies for Multimedia Applications II, Brussels, Belgium, 17 April, 2012. Published in: Proceedings of SPIE, Vol.8436 84360W.

Thesis or Dissertation

Ainscough, Matthew (2001) Integration of self assessment with a change management process for deploying concurrent engineering : executive summary. EngD thesis, University of Warwick.

Allison, Robert William, 1952- (1980) Cracking and tension field action in composite beams. PhD thesis, University of Warwick.

Armoutis, Nikolaos (2006) Small-medium engineering enterprises and e-business: executive summary. EngD thesis, University of Warwick.

Arnab, Sylvester (2009) Soft volume simulation using a deformable surface model. PhD thesis, University of Warwick.

Asante, Michael (2012) Numerical modeling of nosocomial infection in a multi-bed ward environment. PhD thesis, University of Warwick.

Balbontin-Posadas, Alejandro (2000) CETGI : an assessment tool for global concurrent engineering : executive summary. EngD thesis, University of Warwick.

Benterkia, Zoubir (1991) End-plate connections and analysis of semi-rigid steel frames. PhD thesis, University of Warwick.

Berriman, James Robert Stockwell (2004) The application of air-coupled ultrasonic systems and signal processing to the interrogation of concrete. PhD thesis, University of Warwick.

Bishop, N. W. M. (1988) The use of frequency domain parameters to predict structural fatigue. PhD thesis, University of Warwick.

Brown, Nigel David, 1968- (1995) Aspects of sway frame design and ductility of composite end plate connections. PhD thesis, University of Warwick.

Cafolla, Janka (1995) Corrugated webs and lateral restraints in plate girders for bridges. PhD thesis, University of Warwick.

Calway, Andrew David (1989) The multiresolution Fourier transform : a general purpose tool for image analysis. PhD thesis, University of Warwick.

Chandler, I. D. (2012) Vertical variation in diffusion coefficient within sediments. PhD thesis, University of Warwick.

Chen, Shiming, 1957- (1992) Instability of composite beams in hogging bending. PhD thesis, University of Warwick.

Claus, Daniel (2010) Resolution improvement methods applied to digital holography. PhD thesis, University of Warwick.

Claxton, Christopher David, 1980- (2007) Colour depth-from-defocus incorporating experimental point spread function measurements. PhD thesis, University of Warwick.

Coy, Joanne (1991) The quantification of sampling error in coordinate measurement. PhD thesis, University of Warwick.

Davies, Andrew Richard, 1966- (1993) Image feature analysis using the Multiresolution Fourier Transform. PhD thesis, University of Warwick.

Dirlik, Turan (1985) Application of computers in fatigue analysis. PhD thesis, University of Warwick.

Dixon, Steven Mark, 1969- (1994) The analysis of aerospace adhesively bonded aluminium plates using electromagnetic acoustic transducers (EMATs). PhD thesis, University of Warwick.

Dowidar, Helmy A. M. (2003) The geometrical interaction of the stylus and the measured surface in 3D roughness measurements. PhD thesis, University of Warwick.

Duque Daza, Carlos Alberto (2012) Low order modelling of flow-control techniques for turbulent skin-friction reduction. PhD thesis, University of Warwick.

Elam, Dana (2012) A direct numerical simulation of dielectric barrier discharge (DBD) plasma actuators for turbulent skin-friction control. PhD thesis, University of Warwick.

Ganaba, Taher H. (1985) Nonlinear finite element analysis of plates and slabs. PhD thesis, University of Warwick.

Gill, John Martin, 1947- (1973) Design, production and evaluation of tactual maps for the blind. PhD thesis, University of Warwick.

Harvey, Carlo (2011) Modality based perception for selective rendering. PhD thesis, University of Warwick.

Hayes, Jonathan, 1966- (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.

Heath, Thomas V., 1948- (1974) Some properties of bolted joints. PhD thesis, University of Warwick.

Huang, Dong-jie (1994) Composite beams : reliability and longitudinal shear resistance with profiled sheeting. PhD thesis, University of Warwick.

Humphries, Michael Ralph, 1952- (1998) Management in engineering consultancies: with special reference to the Carl Bro Group and Peter Deer and Associates: executive summary. EngD thesis, University of Warwick.

Hunter, David J., 1982- (2010) Volumetric flow prediction using multiple plane particle image velocimetry. PhD thesis, University of Warwick.

James-Gordon, Yvette (2007) A framework to facilitate effective e-learning in engineering development environments: executive summary. EngD thesis, University of Warwick.

Jones, Christopher W. (Christopher Weir), 1982- (2012) Development and characterisation of traceable force measurement for nanotechnology. PhD thesis, University of Warwick.

Jun, Yong-Tae (1999) A feature-based reverse engineering system using artificial neural networks. PhD thesis, University of Warwick.

King, Stephen F. (1995) Using and evaluating CASE tools : from software engineering to phenomenology. PhD thesis, University of Warwick.

Lee, Poh Khoon Ernie (2007) A quest for a better simulation-based knowledge elicitation tool. PhD thesis, University of Warwick.

Lewis, Trevor Stephen, 1971- (1997) The form-finding of structures possessing a constant surface stress. PhD thesis, University of Warwick.

Li, Na, Ph.D. (2009) Intelligent transmitter/receiver to locate infrared user in environment. PhD thesis, University of Warwick.

Li, Yue (2009) Digital image authentication. PhD thesis, University of Warwick.

Mallick, Swapan (1996) Strategies for producing fast finite element solutions of the incompressible Navier-Stokes equations on massively parallel architectures. PhD thesis, University of Warwick.

May, Ian Melville, 1946- (1976) Restrained composite columns. PhD thesis, University of Warwick.

McArdle, Elizabeth (2008) Online communities and their evaluation: creation of a method to assist Online Community Managers to evaluate the performance of their own communities: executive summary. EngD thesis, University of Warwick.

Meredith, James O. (2009) Biocomposites for bone tissue engineering : innovation report. EngD thesis, University of Warwick.

Molenstra, Nadia Julia (1990) Ultimate strength of composite beams. PhD thesis, University of Warwick.

Montgomery, David Edward (2002) Dynamically-compacted cement stabilised soil blocks for low-cost walling. PhD thesis, University of Warwick.

Musella, Manuela (1999) Development and test of a method for the simultaneous measurement of heat capacity and thermal diffusivity by laser-flash technique at very high temperatures: application to uranium dioxide. PhD thesis, University of Warwick.

Najjar, Ismail M. R. I. (2002) Investigation of contact of metrological probe tips with rough engineering surfaces. PhD thesis, University of Warwick.

Neild, Adrian (2003) Ultrasonic air-coupled capacitive arrays. PhD thesis, University of Warwick.

Oehlers, Deric J. (1980) Stud shear connectors for composite beams. PhD thesis, University of Warwick.

Pardoe, Andrew Charles (1996) Neural network image reconstruction for nondestructive testing. PhD thesis, University of Warwick.

Pinfold, Martyn Keith, 1960- (1995) Composite mechanical properties for use in structural analysis. PhD thesis, University of Warwick.

Raj, Alex Noel Joseph (2009) Accurate depth from defocus estimation with video-rate implementation. PhD thesis, University of Warwick.

Rakels, Jan Henricus (1987) An in-process, non-contact surface finish sensor for high quality components generated using diamond turning. PhD thesis, University of Warwick.

Rowley, James Henry (2009) Developing flexible automation for mushroom harvesting (Agaricus bisporus) : innovation report. EngD thesis, University of Warwick.

Shin, Dongjoe (2008) Robust surface modelling of visual hull from multiple silhouettes. PhD thesis, University of Warwick.

Shirvani, Ayoub (1995) An investigation into the design for vibration damping of extended length tool holders. PhD thesis, University of Warwick.

Shukla, Nagesh (2012) Unwarranted variations modelling and analysis of healthcare services based on heterogeneous service data. PhD thesis, University of Warwick.

Still, Gwilym T. (2007) Methods for reducing the cost of cementitious building components in developing countries, with particular reference to rainwater harvesting. PhD thesis, University of Warwick.

Tahir, Mahmood Md., 1961- (1997) Structural and economic aspects of the use of semi-rigid joints in steel frames. PhD thesis, University of Warwick.

Talha, Tariq (2012) A numerical investigation of three-dimensional unsteady turbulent channel flow subjected to temporal acceleration. PhD thesis, University of Warwick.

Talib, Marina (2012) Fabrication and characterisation of 3 dimensional scaffold for tissue engineering application via microstereolithography technique. PhD thesis, University of Warwick.

Vlaskamp, Jozef H. A. (2011) An experimental and numerical investigation into the vertical dependence of Taylor-columns generated by a rotating disc. PhD thesis, University of Warwick.

Yin, Xiaokang (2011) Capacitive imaging technique for non-destructive evaluation (NDE). PhD thesis, University of Warwick.

Yuan, Hui, 1965- (1996) The resistances of stud shear connectors with profiled sheeting. PhD thesis, University of Warwick.

Yue, Zhaoyang (2010) Systematic study of touch-feel perception : surface affective engineering aspects. PhD thesis, University of Warwick.

Çelik, Turgay (2011) A multiresolution framework for computer vision-based autonomous navigation. PhD thesis, University of Warwick.