A

Abd Halim, Nor Farah Huda Binti, Ascroft, Helen and Barnes, Stuart (2017) Analysis of tool wear, cutting force, surface roughness and machining temperature during finishing operation of ultrasonic assisted milling (UAM) of carbon fibre reinforced plastic (CFRP). In: International Conference on Advances in Materials and Processing Technologies (AMPT), Kuala Lumpur, Malaysia, 8–11 Nov 2016. Published in: Procedia Engineering, 184 pp. 185-191. ISSN 1877-7058.

Abdi, Salman, Abdi, Ehsan, Toshani, Hamid and McMahon, Richard A. (2020) Vibration analysis of brushless doubly fed machines in the presence of rotor eccentricity. IEEE Transactions on Energy Conversion . p. 1. doi:10.1109/TEC.2020.2987100 (In Press)

Abdullah, Abu (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.

Alharbi, Khalid Abdulkhaliq M. (2018) The mechanical contact behaviour and tribology of polymer gears. PhD thesis, University of Warwick.

Alkan, Bugra (2018) A complexity modelling approach to support early life-cycle phases of assembly automation systems. PhD thesis, University of Warwick.

Alkan, Bugra and Harrison, Robert (2019) A virtual engineering based approach to verify structural complexity of component-based automation systems in early design phase. Journal of Manufacturing Systems, 53 . pp. 18-31. doi:10.1016/j.jmsy.2019.09.001 (In Press)

Alkan, Bugra, Vera, Daniel A., Ahmad, Bilal and Harrison, Robert (2017) A method to assess assembly complexity of industrial products in early design phase. IEEE Access, 6 . 989 -999. doi:10.1109/ACCESS.2017.2777406

Alkan, Bugra, Vera, Daniel A., Ahmad, Mussawar, Ahmad, Bilal and Harrison, Robert (2016) Design evaluation of automated manufacturing processes based on complexity of control logic. In: 26th CIRP Design Conference, Stockholm, Sweden, 15-17 Jun 2016. Published in: Procedia CIRP ISSN 2212-8271. (In Press)

Alsop, K., Baier, Waltraud, Norman, D. G., Burnett, B. and Williams, M. A. (2021) Accurate prediction of saw blade thicknesses from false start measurements. Forensic Science International, 318 . 110602. doi:10.1016/j.forsciint.2020.110602

Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.

Arya, Farid, Moss, Roger W., Hyde, Trevor, Shire, G. S. F., Henshall, Paul and Eames, Philip (2018) Vacuum enclosures for solar thermal panels part 1 : fabrication and hot-box testing. Solar Energy, 174 . pp. 1212-1223. doi:10.1016/j.solener.2018.10.064

Arya, Farid, Moss, Roger W., Hyde, Trevor, Shire, G. S. F., Henshall, Paul and Eames, Philip (2018) Vacuum enclosures for solar thermal panels part 2 : transient testing with an uncooled absorber plate. Solar Energy, 174 . pp. 1224-1236. doi:10.1016/j.solener.2018.10.063

Asare, Ken (2018) An integrated product, process and resource modeling technique for cost estimation: a remote laser welding case. PhD thesis, University of Warwick.

Ashfold, Michael N. R., Goss, Jonathan P., Green, Ben L., May, Paul W., Newton, Mark E. and Peaker, Chloe V. (2020) Nitrogen in diamond. Chemical Reviews . doi:10.1021/acs.chemrev.9b00518 (In Press)

Assad, Fadi, Rushforth, Emma, Ahmad, Mus'ab, Ahmad, Bilal and Harrison, Robert (2018) An approach of optimising S-curve trajectory for a better energy consumption. In: 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE) , Munich, Germany, 20-24 Aug 2018 . Published in: 2018 IEEE 14th International Conference on Automation Science and Engineering (CASE) pp. 98-103. ISBN 9781538635933. ISSN 2161-8089. doi:10.1109/COASE.2018.8560587

Atay, Atakan, Topuz, Alper, Sarıarslana, Busra, Yıldırım, Ender, Charmet, Jérôme, Couling, Kevin and Cetin, Barbaros (2021) Flow rate controlled pipetting for microfluidics : second generation flexible hydraulic reservoir (FHRv2). Microfluidics and Nanofluidics, 25 . 3. doi:10.1007/s10404-020-02402-x

B

Ba, Dang Xuan, Trương, Đình Quang and Ahn, Kyoung Kwan (2016) An integrated intelligent nonlinear control method for a pneumatic artificial muscle. IEEE/ASME Transactions on Mechatronics, 21 (4). pp. 1835-1845. doi:10.1109/TMECH.2016.2558292

Bai, Pujun, Mei, Jiangping, Huang, Tian and Chetwynd, D. G. (2015) Kinematic calibration of Delta robot using distance measurements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (3). pp. 414-424. doi:10.1177/0954406215603739

Balmer, Leslie (1986) Short term spectral estimation with applications. PhD thesis, University of Warwick.

Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.

Beynon, Meurig, Harfield, Antony and Chang, S. (2005) Alternative model-building for the study of socially interactive robots. In: AISB 2005 Symposium on Robot Companions Hard Problems and Open Challenges in Human-Robot Interaction, Hatfield, UK, 12-15 Apr 2005

Beynon, Meurig, Harfield, Antony and Jormanainen, I. (2006) Varieties of concretisation : an illustrative example. In: 5th Annual Finnish/Baltic Sea Conference on Computer Science Education (Koli Calling 2005), Koli National Park, Finland, 17-20 Nov 2005. Published in: Koli Calling 2005 - Proceedings of the Fifth Koli Calling Conference on Computer Science Education pp. 153-156. ISBN 9512930064.

Bhudwannachai, Pipat (2014) Performance evaluation and analysis of the use of CO2 cooling for conventional drilling of carbon fibre reinforced plastics. PhD thesis, University of Warwick.

Botha, Stefan, Zabihi, Nima, Dobzhanskyi, Oleksandr and Gouws, Rupert (2018) Intelligent fuzzy logic controller for improved power extraction of micro wind turbines. International Journal of Engineering & Technology, 7 (4). pp. 6115-6121. doi:10.14419/ijet.v7i4.23127

Branke, Jürgen, Farid, Suzanne S. and Shah, Nilay (2016) Industry 4.0 : a vision for personalized medicine supply chains? Cell and Gene Therapy Insights, 2 (2). pp. 263-270. doi:doi:10.18609/cgti.2016.027

Bucknall, Alex and Fahmy, Suhaib A. (2021) Runtime abstraction for autonomous adaptive systems on reconfigurable hardware. In: Design, Automation and Test in Europe Conference, Virtual Event- Grenoble (France), 1–5 Feb 2021. Published in: Proceedings of the Design, Automation and Test in Europe Conference (In Press)

Bui, Truong Minh Ngoc, Faraji-Niri, Mona, Worwood, Daniel, Dinh, Truong Quang and Marco, James (2019) An advanced hardware-in-the-loop battery simulation platform for the experimental testing of battery management system. In: 23rd International Conference on Mechatronics Technology (ICMT2019), University of Salerno, Salerno, Italy, 23-26 Oct 2019

Bulat, Mikhail, Bulat, Pavel, Denissenko, Petr, Esakov, Igor, Grachev, Lev, Volkov, Konstantin and Volobuev, Igor (2019) Numerical simulation of ignition of premixed air/fuel mixtures by microwave streamer discharge. IEEE Transactions on Plasma Science, 47 (1). pp. 62-68. doi:10.1109/TPS.2018.2869259

Burian, S. O., Kiselychnyk, Oleh, Pushkar, M. V., Reshetnik, V. S. and Zemlianukhina, H. Y. (2020) Energy-efficient control of pump units based on neural-network parameter observer. Technical Electrodynamics , 2020 (1). pp. 71-77. doi:10.15407/techned2020.01.071

Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.

C

Cai, Kunhai, He, Xianbin, Tian, Yanling, Liu, Xianping, Zhang, Dawei and Shirinzadeh, Bijan (2018) Design of a XYZ Scanner for home-made high-speed atomic force microscopy. Microsystem Technologies, 24 (7). pp. 3123-3132. doi:10.1007/s00542-017-3674-4

Cai, Kunhai, Tian, Yanling, Liu, Xianping, Fatikow, S., Wang, Fujun, Cui, Liangyu, Zhang, Dawei and Shirinzadeh, Bijan (2018) Modeling and controller design of a 6-DOF precision positioning system. Mechanical Systems and Signal Processing, 104 . pp. 536-555. doi:10.1016/j.ymssp.2017.11.002

Cai, Kunhai, Tian, Yanling, Wang, Fujun, Zhang, Dawei, Liu, Xianping and Shirinzadeh, Bijan (2017) Design and control of a 6-degree-of-freedom precision positioning system. Robotics and Computer-Integrated Manufacturing, 44 . pp. 77-96. doi:10.1016/j.rcim.2016.08.005

Cai, Kunhai, Tian, Yanling, Wang, Fujun, Zhang, Dawei, Liu, Xianping and Shirinzadeh, Bijan (2017) Modeling and tracking control of a novel XYθz stage. Microsystem Technologies, 23 (8). pp. 3575-3588. doi:10.1007/s00542-016-3258-8

Cai, Yong and Mias, Christos (2009) Faster 3D finite element time domain : Floquet absorbing boundary condition modelling using recursive convolution and vector fitting. IET Microwaves Antennas & Propagation, Vol.3 (No.2). pp. 310-324. doi:10.1049/iet-map:20080029

Chakrabarti, Barun, Rubio-Garcia, Javier, Kalamaras, Evangelos, Yufit, Vladimir, Tariq, Farid, Low, C. T. J., Kucernak, Anthony and Brandon, Nigel (2020) Evaluation of a non-aqueous vanadium redox flow battery using a deep eutectic solvent and graphene-modified carbon electrodes via electrophoretic deposition. Batteries, 6 (3). 38. doi:10.3390/batteries6030038

Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.

Chen, Ching-Hsien (2013) Tools for developing continuous-flow micro-mixer : numerical simulation of transitional flow in micro geometries and a quantitative technique for extracting dynamic information from micro-bubble images. PhD thesis, University of Warwick.

Chen, Kaixuan, Qiu, Yiwei, Lin, Jin, Liu, Feng, Zhao, Xiaowei and Song, Yonghua (2021) Wake‐effect aware optimal online control of wind farms : an explicit solution. IET Renewable Power Generation . doi:10.1049/rpg2.12078 (In Press)

Chen, Ming, Zhou, Qinnan, Zai, Jiantao, Iqbal, Asma, Tsega, Tsegaye Tadesse, Dong, Boxu, Liu, Xuejiao, Zhang, Yuchi, Yan, Changyu, Zhao, Liang, Nazakat, Ali, Peisan E., Sharel , Low, John C. T. and Qian, Xuefeng (2020) High power and stable P-doped yolk-shell structured Si@C anode simultaneously enhancing conductivity and Li+ diffusion kinetics. Nano Research . doi:10.1007/s12274-020-3142-9 (In Press)

Chen, Ting (Researcher in engineering) (2014) First step of verification of Li's hypothesis : identification of a new vortex structure induced by guide-plate in Three Gorges turbines. PhD thesis, University of Warwick.

Chen, Yangzhi, Liu, X., Chetwynd, D. G. and Huang, P. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. doi:10.1016/j.mechmachtheory.2007.11.005

Cheng, Chuan, Grant, Patrick S. and Lührs, Lukas (2020) Electrochemical mechanics of metal thin films : charge‐induced reversible surface stress for actuation. Advanced Electronic Materials , 6 . 1900364. doi:10.1002/aelm.201900364

Cheng, Fen, Gui, Guan, Zhao, Nan, Chen, Yunfei, Tang, Jie and Sari, Hikmet (2019) UAV relaying assisted secure transmission with caching. IEEE Transactions on Communications . (In Press)

Christou, George and Mias, Christos (2011) Critique of optical negative refraction superlensing. Plasmonics, Vol.6 (No.2). pp. 307-309. doi:10.1007/s11468-011-9205-8

Chuang, Tzu-Shien (1997) A variable structure space voltage vector controlled switched reluctance flux vector drive. PhD thesis, University of Warwick.

Clark, Leon, Shirinzadeh, Bijan, Tian, Yanling and Oetomo, Denny (2015) Laser-based sensing, measurement, and misalignment control of coupled Linear and angular motion for ultrahigh precision movement. IEEE/ASME Transactions on Mechatronics, 20 (1). pp. 84-92. doi:10.1109/TMECH.2014.2301824

Claydon, Rory, Shrestha, Abhay, Rana, Anirudh Singh, Sprittles, James E. and Lockerby, Duncan A. (2017) Fundamental solutions to the R13 equations : efficient computation of 3D kinetic effects. Journal of Fluid Mechanics, 833 . R4. doi:10.1017/jfm.2017.763

Clemente, Lorenzo, Lasota, Sławomir, Lazic, Ranko and Mazowiecki, Filip (2019) Binary reachability of timed-register pushdown automata and branching vector addition systems. ACM Transactions on Computational Logic, 20 (3). pp. 1-31. 14. doi:10.1145/3326161

Cobb, Samuel J. (2019) Tailoring boron doped diamond surface properties for sensing applications. PhD thesis, University of Warwick.

Cobb, Samuel J., Laidlaw, Fraser H.J., West, Geoff, Wood, Georgia, Newton, Mark E., Beanland, Richard and Macpherson, Julie V. (2020) Data for Assessment of acid and thermal oxidation treatments for removing sp2 bonded carbon from the surface of boron diped diamond. [Dataset]

Collingwood, Peter Charles (1985) On algebraic estimation and systems with graded polynomial structure. PhD thesis, University of Warwick.

Comfort, John V. (1970) Studies in engine test bed automation. PhD thesis, University of Warwick.

Cooper, David E., Gibbons, Gregory John, Stanford, Mark and Kibble, Kevin A. (2009) E-Manufacturing for product improvement at Red Bull technology. In: 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, 8-10 Sep 2009

Critoph, Robert E. and Metcalf, Steven J. (2019) UK Summary Report on IEA Heat Pump Technology Collaboration Programme (TCP) Annex 43 : thermally driven heat pumps. London: UK Department for Business, Energy & Industrial Strategy.

Critoph, Robert E., Metcalf, Steven J. and Tamainot-Telto, Zacharie (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. doi:10.1080/01457631003604459

D

Das, Abhishek, Barai, Anup, Masters, Iain and Williams, David K. (2019) Comparison of tab-to-busbar ultrasonic joints for electric vehicle li-ion battery applications. World Electric Vehicle Journal, 10 (3). 55. doi:10.3390/wevj10030055

Das, Abhishek, Franciosa, Pasquale, Gerbino, Salvatore and Williams, D. K. (2016) Prediction of geometric errors of stamped sheet metal parts using deviation field decomposition. In: International Conference on Competitive Manufacturing (COMA), Stellenbosch, South Africa, 27-29 Jan 2016. Published in: Proceedings of International Conference on Competitive Manufacturing (COMA) pp. 109-114. ISBN 9780797216020.

Das, Abhishek, Franciosa, Pasquale, Pesce, Achille and Gerbino, Salvatore (2017) Parametric effect analysis of free-form shape error during sheet metal forming. International Journal of Engineering Science and Technology, 9 (09S). pp. 117-124.

Das, Abhishek, Fritz, Robert, Finuf, Mathew and Masters, Iain (2020) Blue laser welding of multi-layered AISI 316L stainless steel micro-foils. Optics & Laser Technology, 132 . doi:10.1016/j.optlastec.2020.106498

Daviaud, Laure, Jurdzinski, Marcin and Lehtinen, Karolina (2019) Alternating weak automata from universal trees. In: 30th International Conference on Concurrency Theory (CONCUR 2019) , Amsterdam, the Netherlands, 26-31 Aug 2019. Published in: 30th International Conference on Concurrency Theory (CONCUR 2019), 140 pp. 1-14. ISBN 9783959771214 . doi:10.4230/LIPIcs.CONCUR.2019.18

Davies, Gareth N. L. (2000) Heat driven adsorption cooling utilising enhanced effective thermal conductivity monolithic adsorbent generators for refrigeration and ice production in developing countries. PhD thesis, University of Warwick.

Davis, Nathaniel J. L. K., MacQueen, Rowan W., Roberts, Derrick A., Danos, Andrew, Dehn, Sabrina, Perrier, Sébastien and Schmidt, Timothy W. (2016) Energy transfer in pendant perylene diimide copolymers. Journal of Materials Chemistry C, 4 (35). pp. 8270-8275. doi:10.1039/C6TC02555B

Deignan, Anne, Figiel, Lukasz and McCarthy, Michael (2018) Insights into complex rheological behaviour of carbon fibre/PEEK from a novel numerical methodology incorporating fibre friction and melt viscosity. Composite Structures, 189 . pp. 614-626. doi:10.1016/j.compstruct.2018.01.084

Dhara, Sisir and Das, Abhishek (2020) Impact of ultrasonic welding on multi-layered Al–Cu joint for electric vehicle battery applications : a layer-wise microstructural analysis. Materials Science and Engineering: A, 791 . 139795. doi:10.1016/j.msea.2020.139795

Dinh, Quang Truong, Ahn, Kyoung Kwan and Marco, James (2016) A novel robust predictive control system over imperfect networks. IEEE Transactions on Industrial Electronics, 64 (2). 1751 -1761. doi:10.1109/TIE.2016.2580124

Dinh, Quang Truong, Marco, James, Yoon, Jong Il and Ahn, Kyoung Kwan (2018) Robust predictive tracking control for a class of nonlinear systems. Mechatronics, 52 . pp. 135-149. doi:10.1016/j.mechatronics.2018.04.010

Dixit, Shilp, Montanaro, Umberto, Dianati, Mehrdad, Oxtoby, David, Mizutani, Tom, Mouzakitis, Alexandros and Fallah, Saber (2020) Trajectory planning for autonomous high-speed overtaking in structured environments using robust MPC. IEEE Transactions on Intelligent Transportation Systems, 21 (6). pp. 2310-2323. doi:10.1109/TITS.2019.2916354

Docherty, Stephanie Y., Nicholls, William D., Borg, Matthew K., Lockerby, Duncan A. and Reese, Jason M. (2014) Boundary conditions for molecular dynamics simulations of water transport through nanotubes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 228 (Number 1). pp. 186-195. doi:10.1177/0954406213481760

Dogramadzi, Sanja, Giannaccini, Maria Elena, Harper, Christopher, Sobhani, Mohammad, Woodman, Roger and Choung, Jiyeon (2014) Environmental hazard analysis - a variant of preliminary hazard analysis for autonomous mobile robots. Journal of Intelligent & Robotic Systems, 76 (1). pp. 73-117. doi:10.1007/s10846-013-0020-7

Dong, Chenglin, Liu, Haitao, Yue, Wei and Huang, Tian (2018) Stiffness modeling and analysis of a novel 5-DOF hybrid robot. Mechanism and Machine Theory, 125 . pp. 80-93. doi:10.1016/j.mechmachtheory.2017.12.009

Dong, Hongyang, Zhao, Xiaowei and Luo, Biao (2020) Optimal tracking control for uncertain nonlinear systems with prescribed performance via critic-only ADP. IEEE Transactions on Systems, Man, and Cybernetics: Systems . doi:10.1109/TSMC.2020.3003797 (In Press)

Dong, Hongyang, Zhao, Xiaowei and Yang, Haoyang (2020) Reinforcement learning-based approximate optimal control for attitude reorientation under state constraints. IEEE Transactions on Control Systems Technology . doi:10.1109/TCST.2020.3007401 (In Press)

Dooner, Mark and Wang, Jihong (2019) Potential exergy storage capacity of salt caverns in the Cheshire basin using adiabatic compressed air energy storage. Entropy, 21 (11). 1065. doi:10.3390/e21111065

Draper, Heather and Sorell, Tom (2017) Ethical values and social care robots for older people : an international qualitative study. Ethics and Information Technology, 19 (1). pp. 49-68. doi:10.1007/s10676-016-9413-1

E

Edrah, Mohamed, Anaya-Lara, Olimpo, Lo, K. L. and Elansari, Abdussalam (2015) Impact of DFIG based offshore wind farms connected through VSC-HVDC link on power system stability. In: 11th IET International Conference on AC and DC Power Transmission, Birmingham, UK, 10-12 Feb 2015 ISBN 9781849199827. doi:10.1049/cp.2015.0054

Edrah, Mohamed, Lo, Kwok L. and Anaya-Lara, Olimpo (2015) Impacts of high penetration of DFIG wind turbines on rotor angle stability of power systems. IEEE Transactions on Sustainable Energy, 6 (3). pp. 759-766. doi:10.1109/TSTE.2015.2412176

Edrah, Mohamed, Lo, Kwok L., Elansari, Abdussalam and Anaya-Lara, Olimpo (2014) Power oscillation damping capabilities of doubly fed wind generators. In: Power Engineering Conference (UPEC), 2014 49th International Universities, Cluj-Napoca, Romania, 2-5 Sep 2014 pp. 1-6. ISBN 9781479965571. doi:10.1109/UPEC.2014.6934726

Edrah, Mohamed, Zhao, Xiaowei, Hung, William, Qi, Pengyuan, Marshall, Benjamin, Karcanias, Aris and Baloch, Shurooque (2020) Effects of POD control on a DFIG wind turbine structural system. IEEE Transactions on Energy Conversion . doi:10.1109/TEC.2020.2966181 (In Press)

Elliott, Mark T., Ward, Dominic , Stables, Ryan , Fraser, Dagmar , Jacoby, Nori and Wing, Alan M. (2018) Analysing multi-person timing in music and movement : event based methods. In: Vatakis, Argiro and Balcı, Fuat and Di Luca, Massimiliano and Correa, Ángel , (eds.) Timing and Time Perception : Procedures, Measures, and Applications. Brill, pp. 177-215. ISBN 9789004280205

Eriksson, Tobias J. R., Ramadas, Sivaram Nishal and Dixon, Steve M. (2016) Experimental and simulation characterisation of flexural vibration modes in unimorph ultrasound transducers. Ultrasonics, 65 . pp. 242-248. doi:10.1016/j.ultras.2015.09.018

Erkan, Onur, Özkan, Musa, Karakoç, T. Hikmet, Garrett, Stephen J. and Thomas, Peter J. (2020) Investigation of aerodynamic performance characteristics of a wind-turbine-blade profile using the finite-volume method. Renewable Energy, 161 . pp. 1359-1367. doi:10.1016/j.renene.2020.07.138

Evans, T. S., Quarini, Giuseppe Leonardo and Shire, G. S. F. (2008) Investigation into the transportation and melting of thick ice slurries in pipes. International Journal of Refrigeration, Vol.31 (No.1). pp. 145-151. doi:10.1016/j.ijrefrig.2007.06.008

Evernden, M. C. and Mottram, J. Toby (2011) Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering: an international journal, 14 (6). pp. 991-1004. doi:10.1260/1369-4332.14.6.991

F

Fan, Chuanxin, Higgins, Matthew D. and Widanage, Widanalage Dhammika (2020) Real-time state of charge estimation of electrochemical model for lithium-ion battery. In: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Hanoi, Vietnam, 14 -17 Oct 2019. Published in: 2019 IEEE Vehicle Power and Propulsion Conference (VPPC) ISBN 9781728112497. doi:10.1109/VPPC46532.2019.8952284

Farrall, Simon David (1993) A study in the use of fuzzy logic in the management of an automotive heat engine / electric hybrid vehicle powertrain. PhD thesis, University of Warwick.

Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.

Ferri, Carlo, Ivanov, Atanas and Petrelli, Antoine (2008) Electrical measurements in µ-EDM. Journal of Micromechanics and Microengineering, 18 (8). 085007. doi:10.1088/0960-1317/18/8/085007

Ferri, Carlo, Minton, Timothy, Bin Che Ghani, Saiful and Cheng, Kai (2014) Efficiency in contamination-free machining using microfluidic structures. CIRP Journal of Manufacturing Science and Technology, 7 (2). pp. 97-105. doi:10.1016/j.cirpj.2013.12.001

Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.

Fitch-Roy, Oscar (2016) An offshore wind union? Diversity and convergence in European offshore wind governance. Climate Policy, 16 (5). pp. 586-605. doi:10.1080/14693062.2015.1117958

Fitch-Roy, Oscar, Benson, David and Woodman, Bridget (2019) Policy instrument supply and demand : how the renewable electricity auction took over the world. Politics and Governance, 7 (1). 81. doi:doi:10.17645/pag.v7i1.1581

Fowell, Barry George (1983) In-process control of grinding. PhD thesis, University of Warwick.

Franciosa, Pasquale, Palit, Arnab, Gerbino, Salvatore and Ceglarek, Darek (2019) A novel hybrid shell element formulation (QUAD+ and TRIA+) : a benchmarking and comparative study. Finite Elements in Analysis and Design, 166 (15). 103319. doi:10.1016/j.finel.2019.103319

Franciosa, Pasquale, Sun, Tianzhu, Ceglarek, Darek, Gerbino, Salvatore and Lanzotti, Antonio (2019) Multi-wave light technology enabling closed-loop in-process quality control for automotive battery assembly with remote laser welding. In: SPIE Optical Metrology, 2019, Munich, 24-27 Jun 2019. Published in: Proceedings of SPIE - International Society for Optical Engineering, 11059 p. 9. ISSN 0277-786X. doi:10.1117/12.2526075

G

Garvey, S. D., Eames, P. C., Wang, J. H., Pimm, A. J., Waterson, M., MacKay, Robert S., Giulietti, M., Flatley, Lisa, Thomson, M., Barton, J., Evans, David, Busby, J. and Garvey, J. E. (2015) On generation-integrated energy storage. Energy Policy, 86 . pp. 544-551. doi:10.1016/j.enpol.2015.08.001

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. doi:10.1243/09544100JAERO583

Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. doi:10.1243/09544100JAERO582

Glasser, Leslie and Jenkins, H. Donald Brooke (2016) Predictive thermodynamics for ionic solids and liquids. Physical Chemistry Chemical Physics, 18 (31). pp. 21226-21240. doi:10.1039/c6cp00235h

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2020) Coverage path planning with targetted viewpoint sampling for robotic free-from surface inspection. Robotics and Computer-Integrated-Manufacturing, 61 . 101843. doi:10.1016/j.rcim.2019.101843

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2018) End-effector design optimisation and multi-robot motion planning for handling compliant parts. Structural and Multidisciplinary Optimization, 57 (3). pp. 1377-1390. doi:10.1007/s00158-017-1798-x

Glorieux, Emile, Franciosa, Pasquale and Ceglarek, Darek (2019) Quality and productivity driven trajectory optimisation for robotic handling of compliant sheet metal parts in multi-press stamping lines. Robotics and Computer-Integrated Manufacturing, 56 . pp. 264-275. doi:10.1016/j.rcim.2018.10.004

Glorieux, Emile, Svensson, Bo, Danielsson, Fredrik and Parthasarathy, Prithwick (2019) Energy model for motion planning of 2D-belt press line tending robots. International Journal of Manufacturing Research . doi:10.1504/IJMR.2020.10023045 (In Press)

Glover, Peter Benedict Myers (1994) Computer simulation and analysis methods in the development of the hydraulic ram pump. PhD thesis, University of Warwick.

Gongora, Mario Augusto (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.

Gouder, K., Zhao, X., Limebeer, D. J. N. and Graham, J. M. R. (2016) Experimental aerodynamic control of a long-span suspension bridge section using leading- and trailing-edge control surfaces. IEEE Transactions on Control Systems Technology, 24 (4). pp. 1441-1453. doi:10.1109/TCST.2015.2501346

Guo, Z., Tian, Yanling, Liu, Xianping, Wang, F., Zhou, C. and Zhang, D. (2017) Experimental investigation of the tip based micro/nano machining. Applied Surface Science, 426 . pp. 406-417. doi:10.1016/j.apsusc.2017.07.181

Guo, Z., Tian, Yanling, Liu, Xianping, Wang, F., Zhou, C. and Zhang, D. (2017) Modeling and simulation of the probe tip based nanochannel scratching. Precision Engineering, 49 . pp. 136-145. doi:10.1016/j.precisioneng.2017.02.002

Guo, Z., Tian, Yanling, Zhang, D., Wang, T. and Wu, M. (2019) A novel stick-slip based linear actuator using bi-directional motion of micropositioner. Mechanical Systems and Signal Processing, 128 . pp. 37-49. doi:10.1016/j.ymssp.2019.03.025

Guo, Zhiyong, Tian, Yanling, Liu, Xianping, Wang, Fujun, Zhang, Hongjie and Zhang, Dawei (2016) Probe system design for three dimensional micro/nano scratching machine. Microsystem Technologies . doi:10.1007/s00542-016-3115-9

Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622. ISSN 2212-8271. doi:10.1016/j.procir.2016.04.026

Gupta, Disha, Muthiah, Aravind, Do, Minh Phuong, Sankar, Gopinathan, Hyde, Timothy I., Copley, Mark, Baikie, Tom, Du, Yonghua, Xi, Shibo, Srinivasan, Madhavi and Dong, ZhiLi (2019) Electronic and geometric structures of rechargeable lithium manganese sulfate Li2Mn(SO4)2 cathode. ACS Omega, 4 (7). pp. 11338-11345. doi:10.1021/acsomega.9b00356

H

Hafner, Rebecca J., Elmes, David and Read, Daniel (2019) Promoting behavioural change to reduce thermal energy demand in households : a review. Renewable and Sustainable Energy Reviews, 102 . pp. 205-214. doi:10.1016/j.rser.2018.12.004

Hamilton, Ross (1997) Continuous path : the evolution of process control technologies in post-war Britain. PhD thesis, University of Warwick.

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, Mike (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. doi:10.1016/j.jmatprotec.2010.02.019

Han, Li, Thornton, Martin and Shergold, Mike (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. doi:10.1016/j.matdes.2009.08.031

Hang, Chang C. (1973) Design studies of model reference adaptive control and identification systems. PhD thesis, University of Warwick.

Hanoch, Y., Arvizzigno, F., Hernandez García, D., Denham, S., Belpaeme, T. and Gummerum, M. (2020) The robot made me do it : human-robot interaction and risk-taking behavior. Cyberpsychology, Behavior, and Social Networking . doi:10.1089/cyber.2020.0148 (In Press)

Harris, Joseph H. (2013) Stability of the flow over a rough, rotating disk. PhD thesis, University of Warwick.

Harrison, Robert, Vera, Daniel A. and Ahmad, Bilal (2021) A connective framework to support the lifecycle of cyber-physical production systems. Proceedings of the IEEE . doi:10.1109/JPROC.2020.3046525 (In Press)

Hazra, S. K. , Roya, R., Williams, D. K., Aylmoreb, R. and Hollingdale, D. (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, Volume 213 . pp. 2049-2063. doi:10.1016/j.jmatprotec.2013.04.016

He, Ting, Wu, Zhenlong, Li, Donghai and Wang, Jihong (2019) A tuning method of active disturbance rejection control for a class of high-order processes. IEEE Transactions on Industrial Electronics . (In Press)

He, Wei, Luo, Xing, Evans, David, Busby, Jonathan, Garvey, Seamus, Parkes, Daniel and Wang, Jihong (2017) Exergy storage of compressed air in cavern and cavern volume estimation of the large-scale compressed air energy storage system. Applied Energy, 208 . pp. 745-757. doi:10.1016/j.apenergy.2017.09.074

He, Wei and Wang, Jihong (2017) Feasibility study of energy storage by concentrating/desalinating water : concentrated water energy storage. Applied Energy, 185 (1). pp. 872-884. doi:10.1016/j.apenergy.2016.10.077

He, Wei and Wang, Jihong (2018) Optimal selection of air expansion machine in compressed air energy storage : a review. Renewable & sustainable energy reviews, 87 . pp. 77-95. doi:10.1016/j.rser.2018.01.013

He, Wei, Wang, Jihong and Ding, Yulong (2017) New radial turbine dynamic modelling in a low-temperature adiabatic compressed air energy storage system discharging process. Energy Conversion and Management, 153 . pp. 144-156. doi:10.1016/j.enconman.2017.09.059

Heeley, Ellen L., Billimora, Kharmen, Parsons, Nathan, Figiel, Lukasz, Keating, Elspeth, Cafolla, Conor T., Crabb, Eleanor M. and Hughes, Darren J. (2020) In-situ uniaxial drawing of poly-L-lactic acid (PLLA) : following the crystalline morphology development using time-resolved SAXS/WAXS. Polymer, 193 . 122353. doi:10.1016/j.polymer.2020.122353

Henshall, Paul, Eames, Philip C., Arya, Farid, Hyde, Trevor, Moss, Roger W. and Shire, G. S. F. (2016) Constant temperature induced stresses in evacuated enclosures for high performance flat plate solar thermal collectors. Solar Energy, 127 . pp. 250-261. doi:10.1016/j.solener.2016.01.025

Holland, David M., Borg, Matthew K., Lockerby, Duncan A. and Reese, Jason M. (2015) Enhancing nano-scale computational fluid dynamics with molecular pre-simulations : unsteady problems and design optimisation. Computers & Fluids, Volume 115 . pp. 46-53. doi:10.1016/j.compfluid.2015.03.023

Hosseinzadeh, Elham, Arias, Sebastian, Krishna, Muthu, Worwood, Daniel, Barai, Anup, Widanage, Widanalage Dhammika and Marco, James (2021) Quantifying cell-to-cell variations of a parallel battery module for different pack configurations. Applied Energy, 282 (Part A). 115859. doi:10.1016/j.apenergy.2020.115859

Howell, Richard M. (2006) Snoring : a flow-structure interaction. PhD thesis, University of Warwick.

Hu, Gaofeng, Gao, Weiguo, Chen, Ye, Zhang, Dawei, Tian, Yanling, Qi, Xiangyang and Zhang, Hongjie (2018) An experimental study on the rotational accuracy of variable preload spindle-bearing system. Advances in Mechanical Engineering, 10 (5). pp. 1-14. doi:10.1177/1687814018776171

Hu, Yukun, Wang, Jihong, Tan, CK., Sun, Chenggong and Liu, Hao (2018) Coupling detailed radiation model with process simulation in Aspen Plus : a case study on fluidized bed combustor. Applied Energy, 227 . pp. 168-179. doi:10.1016/j.apenergy.2017.08.030

Hu, Zedong (2017) An investigation into the wear and thermal-mechanical performance of polyacetal gears. PhD thesis, University of Warwick.

Hu, Zedong and Mao, Ken (2017) An investigation of misalignment effects on the performance of acetal gears. Tribology International, 116 . pp. 394-402. doi:10.1016/j.triboint.2017.07.029

Huang, Tian, Bai, Pujan, Mei, Jiangping and Chetwynd, D. G. (2016) Tolerance design and kinematic calibration of a 4-DOF pick-and-place parallel robot. Journal of Mechanisms and Robotics, 8 (6). 061018. doi:10.1115/1.4034788

Huang, Tian, Dong, Chenglin, Liu, Haitao, Sun, Tao and Chetwynd, D. G. (2019) A simple and visually orientated approach for type synthesis of overconstrained 1T2R parallel mechanisms. Robotica, 37 . pp. 1161-1173. doi:10.1017/S0263574718000395

Huang, Tian, Liu, H. T. and Chetwynd, D. G. (2011) Generalized Jacobian analysis of lower mobility manipulators. Mechanism and Machine Theory, Vol.46 (No.6). pp. 831-844. doi:10.1016/j.mechmachtheory.2011.01.009

Huang, Tian, Liu, Songtao, Mei, Jiangping and Chetwynd, D. G. (2013) Optimal design of a 2-DOF pick-and-place parallel robot using dynamic performance indices and angular constraints. Mechanism and Machine Theory, Volume 70 . pp. 246-253. doi:10.1016/j.mechmachtheory.2013.07.014

Huang, Tian, Zhao, Dong, Yin, Fuwen, Tian, Wenjie and Chetwynd, D. G. (2019) Kinematic calibration of a 6-DOF hybrid robot by considering multicollinearity in the identification Jacobian. Mechanism and Machine Theory, 131 . pp. 371-384. doi:10.1016/j.mechmachtheory.2018.10.008

Hutchins, David A., Huthwaite, P., Davis, Lee A. J., Billson, Duncan R., Senni, L., Laureti, S. and Ricci, M. (2020) Mid infrared tomography of polymer pipes. Journal of Nondestructive Evaluation, 39 . 73. doi:10.1007/s10921-020-00714-0

I

Imjai, Thanongsak, Thinsurat, Kamon, Ditthakit, Pakorn, Wipulanusat, Warit, Setkit, Monthian and Garcia, Reyes (2020) Performance study of an integrated solar water supply system for isolated agricultural areas in Thailand : a case-study of the Royal Initiative Project. Water, 12 (9). p. 2438. doi:10.3390/w12092438

Invernizzi, Diletta Colette, Locatelli, Giorgio, Velenturf, Anne, Love, Peter E. D., Purnell, Phil and Brookes, Naomi J. (2020) Developing policies for the end-of-life of energy infrastructure : coming to terms with the challenges of decommissioning. Energy Policy, 144 . 111677. doi:10.1016/j.enpol.2020.111677

Ip, Chung Man and Troisi, Alessandro (2016) A computational study of the competing reaction mechanisms of the photo-catalytic reduction of CO2 on anatase(101). Physical Chemistry Chemical Physics, 18 (36). pp. 25010-25021. doi:10.1039/C6CP02642G

Ismail, Mohd Anuar Bin (2017) Development and characterisation of next generation stylus for micro coordinate measuring machine. PhD thesis, University of Warwick.

J

Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.

Jbair, Mohammad, Ahmad, Bilal, Ahmad, Mus'ab, Vera, Daniel A., Harrison, Robert and Ridler, Tony (2019) Automatic PLC code generation based on virtual engineering model. In: IEEE International Conference on Industrial Cyber-Physical Systems (ICPS 2019), Taipei, Taiwan, 6-9 May 2019 pp. 675-680. ISBN 9781538685006. doi:10.1109/ICPHYS.2019.8780213

Jeanneret, Raphaël, Pushkin, Dmitri O. and Polin, Marco (2019) Confinement enhances the diversity of microbial flow fields. Physical Review Letters, 123 (24). 248102. doi:10.1103/PhysRevLett.123.248102

Jeerh, Georgina, Zhang, Mengfei and Tao, Shanwen (2020) Recent progress in ammonia fuel cells and their potential applications. Journal of Materials Chemistry A . doi:10.1039/d0ta08810b (In Press)

Jeffs, James (2019) An investigation into the optimal operation of a complex heat pump for the complete thermal management of an electric vehicle in cold climates. PhD thesis, University of Warwick.

Jegede, Oluyemi (2017) Concept design of a thermo-chemical heat pump using calcium chloride-NH₃ and magnesium chloride-NH₃ working pairs. PhD thesis, University of Warwick.

Jimoh, Bashir O. (2018) Phase change material optimized for integration with domestic heat pump. PhD thesis, University of Warwick.

Jing, Xiubing, Li, Huaizhong, Wang, Jun and Tian, Yanling (2014) Modelling the cutting forces in micro-end-milling using a hybrid approach. The International Journal of Advanced Manufacturing Technology, 73 (9-12). pp. 1647-1656. doi:10.1007/s00170-014-5953-x

John, Benzi, Lockerby, Duncan A., Patronis, Alexander and Emerson, David R. (2018) Simulation of the head-disk interface gap using a hybrid multi-scale method. Microfluidics and Nanofluidics, 22 (9). 106. doi:10.1007/s10404-018-2126-5

Judson, E., Fitch-Roy, O., Pownall, T., Bray, R., Poulter, H., Soutar, I., Lowes, R., Connor, P. M., Britton, J., Woodman, B. and Mitchell, C. (2020) The centre cannot (always) hold : examining pathways towards energy system de-centralisation. Renewable and Sustainable Energy Reviews , 118 . 109499. doi:10.1016/j.rser.2019.109499 (In Press)

Jung, Seo Yoon and Chung, Yongmann M. (2012) Large-eddy simulation of accelerated turbulent flow in a circular pipe. International Journal of Heat and Fluid Flow, Volume 33 (Number 1). pp. 1-8. doi:10.1016/j.ijheatfluidflow.2011.11.005

K

Kaniappan Chinnathai, Malarvizhi, Alkan, Bugra and Harrison, Robert (2017) Convertibility evaluation of automated assembly system designs for high variety production. In: 27th CIRP Design 2017, Cranfield University, 10-12 May 2017. Published in: Procedia CIRP, 60 pp. 74-79. ISSN 2212-8271.

Kaniappan Chinnathai, Malarvizhi, Günther, Till, Ahmad, Mussawar, Stocker, Cosima, Richter, Lukas, Schreiner, David, Vera, Daniel A., Reinhart, Gunther and Harrison, Robert (2017) An application of physical flexibility and software reconfigurability for the automation of battery module assembly. Procedia CIRP, 63 . pp. 604-609. doi:10.1016/j.procir.2017.03.128

Karavasilis, Theodore L., Makris, Nicos, Bazeos, Nikitas and Beskos, D. E. (2010) Dimensional response analysis of multistorey regular steel MRF subjected to pulselike earthquake ground motions. Journal of Structural Engineering, Vol.136 (No.8). pp. 921-932. doi:10.1061/(ASCE)ST.1943-541X.0000193

Khaliji Oskouei, Mohammadhasan and Tamainot-Telto, Zacharie (2019) Investigation of heat transfer properties of granular activated carbon with R723 for adsorption refrigeration and heat pump. Thermal Science and Engineering Progress . doi:10.1016/j.tsep.2019.05.003 (In Press)

Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.

Khodadadi Azadboni, Reza, Heidari, Ali and Wen, Jennifer X. (2018) A computational fluid dynamic investigation of inhomogeneous hydrogen flame acceleration and transition to detonation. Flow, Turbulence and Combustion . doi:10.1007/s10494-018-9977-4

Khosravi, A., Malekan, M., Pabon, J. J. G., Zhao, Xiaowei and Assad, M. E. H. (2020) Design parameter modelling of solar power tower system using adaptive neuro-fuzzy inference system optimized with a combination of genetic algorithm and teaching learning-based optimization algorithm. Journal of Cleaner Production, 244 . 118904. doi:10.1016/j.jclepro.2019.118904

Khovanova, N. A. and Khovanov, I. A. (2011) The role of excitations statistic and nonlinearity in energy harvesting from random impulsive excitations. Applied Physics Letters, Vol.99 (No.14). Article: 144101144101. doi:10.1063/1.3647556

Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.

King, Marcus, Jain, Anjali, Bhakar, Rohit , Mathur, Jyotirmay and Wang, Jihong (2021) Overview of current compressed air energy storage projects and analysis of the potential underground storage capacity in India and the UK. Renewable and Sustainable Energy Reviews , 139 . 110705. doi:10.1016/j.rser.2021.110705

Koleti, Upender Rao, Rajan, Ashwin T., Tan, Chaou C., Moharana, Sanghamitra, Dinh, Truong Quang and Marco, James (2020) A study on the influence of lithium plating on battery degradation. Energies, 13 (13). 3458. doi:10.3390/en13133458 (In Press)

Koleti, Upender Rao, Zhang, Cheng, Malik, Romeo, Dinh, Quang Truong and Marco, James (2019) The development of optimal charging strategies for lithium-ion batteries to prevent the onset of lithium plating at low ambient temperatures. Journal of Energy Storage, 24 . 100798. doi:10.1016/j.est.2019.100798

Kourra, Nadia, Warnett, Jason M., Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (2017) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology, 88 (5-8). pp. 1417-1427. doi:10.1007/s00170-016-8691-4

Kourra, Nadia, Warnett, Jason M., Attridge, Alex and Williams, M. A. (2017) Metrological investigation of radiation filtration in x-ray computed tomography. In: Instrumentation and Measurement Technology Conference (I2MTC), Torino, Italy, Italy, 22-25 May 2017. Published in: 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), pp. 1-6. ISBN 9781509035960. doi:10.1109/I2MTC.2017.7969797

Kreikemeyer-Lorenzo, D., Unterberger, W. (Werner), Blume, R., Hävecker, M., Rocha, T. C. R., Knop-Gericke, A., Schlögl, R., Lerotholi, T. J., Duncan, David A. and Woodruff, D. P. (2013) Quantitative adsorbate structure determination under catalytic reaction conditions. Physical Review B (Condensed Matter and Materials Physics), Volume 87 (Number 12). 125420 . doi:10.1103/PhysRevB.87.125420

Krupke, Christopher (2016) Study on a hybrid wind turbine system with Intrinsic compressed air energy storage provision. PhD thesis, University of Warwick.

Krupke, Christopher, Wang, Jihong, Clarke, Jonathan and Luo, Xing (2017) Modelling and experimental study of a wind turbine system in hybrid connection with compressed air energy storage. IEEE Transactions on Energy Conversion, 32 (1). pp. 137-145. doi:10.1109/TEC.2016.2594285

Kubrusly, Carlos Silva (1976) Identification for distributed parameter systems. PhD thesis, University of Warwick.

Kuzemko, Caroline, Bradshaw, Michael J., Bridge, Gavin, Goldthau, Andreas, Jewell, Jessica, Overland, Indra, Scholten, Daniel, Van de Graaf, Thijs and Westphal, Kirsten (2020) Covid-19 and the politics of sustainable energy transitions. Energy Research & Social Science, 68 . 101685. doi:10.1016/j.erss.2020.101685

L

Lapierre, Florian, Cameron, Neil R. and Zhu, Yonggang (2015) Ready… set, flow : simple fabrication of microdroplet generators and their use in the synthesis of PolyHIPE microspheres. Journal of Micromechanics and Microengineering, 25 (3). 035011. doi:10.1088/0960-1317/25/3/035011

Leftheriotis, George (1992) Development of wind turbines to operate in modified axial flows which contain swirl velocities and non-uniform distributions. PhD thesis, University of Warwick.

Lewis, W. J., Brew, J. S., Bryanston-Cross, P. and Nawasra, J. S. (2011) Form-finding as a modelling tool for shaping mechanical components: a feasibility case study of an axial-flow compressor blade. Engineering Structures, Vol.33 (No.9). pp. 2612-2620. doi:10.1016/j.engstruct.2011.05.008

Li, Decai, Hu, Yukun, Li, Dacheng and Wang, Jihong (2019) Combined-cycle gas turbine power plant integration with cascaded latent heat thermal storage for fast dynamic responses. Energy Conversion and Management, 183 . pp. 1-13. doi:10.1016/j.enconman.2018.12.082

Li, Decai, Zhang, Wenbin and Wang, Jihong (2019) Flexible operation of supercritical power plant via integration of thermal energy storage. In: Taner, Tolga, (ed.) Power Plants in the Industry. UK: IntechOpen, pp. 1-14. ISBN 9781789850833 (In Press)

Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2017) Self-piercing riveting - a review. The International Journal of Advanced Manufacturing Technology, 92 (5-8). pp. 1777-1824. doi:10.1007/s00170-017-0156-x

Li, Dezhi, Han, Li, Chrysanthou, Andreas and Shergold, Mike (2018) Influence of corrosion of self-piercing riveted high strength aluminium alloy joints with button cracks on the mechanical strength. Journal of Material Science and Technology Research, 5 . pp. 16-27. doi:10.15377/2410-4701.2018.05.4

Li, Shengcai, 1941- (1990) Cavitation associated low-frequency fluctuation. PhD thesis, University of Warwick.

Li, Yuhang, Huang, Tian and Chetwynd, D. G. (2018) An approach for smooth trajectory planning of high-speed pick-and-place parallel robots using quintic B-splines. Mechanism and Machine Theory, 126 . pp. 479-490. doi:10.1016/j.mechmachtheory.2018.04.026

Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.

Liebe, Ulf, Bartczak, Anna and Meyerhoff, Jürgen (2017) A turbine is not only a turbine : the role of social context and fairness characteristics for the local acceptance of wind power. Energy Policy, 107 . pp. 300-308. doi:10.1016/j.enpol.2017.04.043

Liebe, Ulf and Dobers, Geesche M. (2019) Decomposing public support for energy policy : what drives acceptance of and intentions to protest against renewable energy expansion in Germany? Energy Research & Social Science, 47 . pp. 247-260. doi:10.1016/j.erss.2018.09.004

Lillington, Richard (2013) Fuel system characterization : an investigation into the effects associated with the manufacturing and testing of precision fuel system components. PhD thesis, University of Warwick.

Lin, Shuyue (2018) Control of the offshore wind turbine and its grid integration. PhD thesis, University of Warwick.

Lin, Shuyue, Qi, Pengyuan and Zhao, Xiaowei (2020) Power generation control of a hydrostatic wind turbine implemented by model-free adaptive control scheme. Wind Energy, 23 (4). pp. 849-863. doi:10.1002/we.2437

Lin, Shuyue, Zhao, Xiaowei and Tong, Xin (2019) Feasibility studies of a converter-free grid-connected offshore hydrostatic wind turbine. IEEE Transactions on Sustainable Energy . doi:10.1109/TSTE.2019.2963628 (In Press)

Liu, Fei, Giulietti, Monica and Chen, Bo (2016) Joint optimization of generation and storage in the presence of wind. IET Renewable Power Generation, 10 (10). pp. 1477-1487. doi:10.1049/iet-rpg.2015.0547

Liu, H., Huang, Tian and Chetwynd, D. G. (2011) A method to formulate a dimensionally homogeneous Jacobian of parallel manipulators. IEEE Transactions on Robotics, Vol.27 (No.1). pp. 150-156. doi:10.1109/TRO.2010.2082091

Liu, Haitao, Huang, Tian, Chetwynd, D. G. and Kecskemethy, Andres (2017) Stiffness modeling of parallel mechanisms at limb and joint/link levels. IEEE Transactions on Robotics, 33 (3). pp. 734-741. doi:10.1109/TRO.2017.2654499

Liu, Hao (2015) Energy saving through voltage optimisation & non-intrusive load monitoring in domestic house. PhD thesis, University of Warwick.

Liu, Huaiju (2013) Lubricated contact analysis of a spur gear pair with dynamic loads. PhD thesis, University of Warwick.

Liu, Kuo-Kang, Wu, Ren-Guei, Chuang, Yun-Ju, Khoo, Hwa Seng, Huang, Shih-Hao and Tseng, Fan-Gang (2010) Microfluidic systems for biosensing. Sensors, Vol.10 (No.7). pp. 6623-6661. doi:10.3390/s100706623

Liu, Qi and Huang, Tian (2019) Inverse kinematics of a 5-axis hybrid robot with non-singular tool path generation. Robotics and Computer-Integrated Manufacturing, 56 . pp. 140-148. doi:10.1016/j.rcim.2018.06.003

Liu, Teng, Gao, Weiguo, Tian, Yanling, Zhang, Dawei, Zhang, Yifan and Chang, Wenfen (2017) Power matching based dissipation strategy onto spindle heat generations. Applied Thermal Engineering, 113 . pp. 499-507. doi:10.1016/j.applthermaleng.2016.11.057

Liu, Teng, Gao, Weiguo, Zhang, Dawei, Zhang, Yifan, Chang, Wenfen, Liang, Cunman and Tian, Yanling (2017) Analytical modeling for thermal errors of motorized spindle unit. International Journal of Machine Tools and Manufacture, 112 . pp. 53-70. doi:10.1016/j.ijmachtools.2016.09.008

Liu, X., Yue, Zhaoyang, Cai, Z., Chetwynd, D. G. and Smith, S. T. (2008) Quantifying touch-feel perception : tribological aspects. Measurement Science and Technology, Vol.19 (No.8). Article: 084007. doi:10.1088/0957-0233/19/8/084007

Liu, Yunpeng, Han, Li, Zhao, Huan and Liu, Xianping (2021) Evaluation and correction of cutting position’s effects on quality indicator measurement of self-piercing riveted joint. Materials & Design, 202 . 109583. doi:10.1016/j.matdes.2021.109583

Liu, Yunpeng, Han , Li, Zhao, Huan and Liu, Xianping (2019) Effects of the die parameters on the self-piercing riveting process. International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3353-3368. doi:10.1007/s00170-019-04567-4

Liu, Yunpeng, Li, Hang, Zhao, Huan and Liu, Xianping (2021) Numerical modelling and experimental investigation of the Riv-Bonding process. Journal of Materials Processing Technology, 288 . 116914. doi:10.1016/j.jmatprotec.2020.116914

Liu, Zipeng, Chen, Huan, Zheng, Bo, Xie, Fengwei and Chen, Ling (2020) Understanding the structure and rheological properties of potato starch induced by hot-extrusion 3D printing. Food Hydrocolloids, 105 . 105812. doi:10.1016/j.foodhyd.2020.105812

Llano Chiguano, Danilo X (Xavier) and McMahon, Richard A. (2018) Modelling, control and sensorless speed estimation of micro-wind turbines for deployment in Antarctica. IET Renewable Power Generation, 12 (3). pp. 342-350. doi:10.1049/iet-rpg.2016.0528

Llano Chiguano, Danilo X. and McMahon, Richard A. (2017) Control techniques with system efficiency comparison for micro-wind turbines. IEEE Transactions on Sustainable Energy, 8 (4). pp. 1609-1617. doi:10.1109/TSTE.2017.2698024

Loveridge, Melanie, Remy, Guillaume , Kourra, Nadia, Genieser, Ronny, Barai, Anup, Lain, Mike J., Guo, Yue, Amor-Segan, Mark, Williams, Mark A., Amietszajew, Tazdin, Ellis, Mark, Bhagat, Rohit and Greenwood, David G. (2018) Looking deeper into the galaxy (note 7). Batteries, 4 (3). 3. doi:10.3390/batteries4010003

Lunn, Natasha (2018) Development of EMAT and piezoelectric transducers for high temperature ultrasonic thickness measurements. PhD thesis, University of Warwick.

Luo, Hang, Zhou, Xuefan, Ellingford, Christopher, Zhang, Yan, Chen, Sheng, Zhou, Kechao, Zhang, Dou, Bowen, Chris R. and Wan, Chaoying (2019) Interface design for high energy density polymer nanocomposites. Chemical Society Reviews, 48 (16). pp. 4424-4465. doi:10.1039/c9cs00043g

Luo, Xing, Dooner, Mark, He, Wei, Wang, Jihong, Li, Yaowang, Li, Decai and Kiselychnyk, Oleh (2018) Feasibility study of a simulation software tool development for dynamic modelling and transient control of adiabatic compressed air energy storage with its electrical power system applications. Applied Energy, 228 . pp. 1198-1219. doi:10.1016/j.apenergy.2018.06.068

Luo, Xing, Wang, Jihong, Dooner, Mark, Clarke, Jonathan and Krupke, Christopher (2014) Overview of current development in compressed air energy storage technology. Energy Procedia, Volume 62 . pp. 603-611. doi:10.1016/j.egypro.2014.12.423

M

Ma, Yue, Niu, Wentie, Luo, Zhenjun, Yin, Fuwen and Huang, Tian (2016) Static and dynamic performance evaluation of a 3-DOF spindle head using CAD–CAE integration methodology. Robotics and Computer-Integrated Manufacturing, 41 . pp. 1-12. doi:10.1016/j.rcim.2016.02.006

MacKay, Robert S. (2020) Sustainable energy storage - with hot air, cold air and liquid air. Contemporary Physics, 61 (1). pp. 1-11. doi:10.1080/00107514.2020.1794380

Malard, B., Pilch, J., Sittner, P., Davydov, V. (Vadim), Sedlák, P., Konstantinidis, K. and Hughes, Darren J. (2012) Internal stresses in steel plate generated by shape memory alloy inserts. Acta Materialia, Vol.60 (No.3). pp. 1378-1394. doi:10.1016/j.actamat.2011.10.024

Mao, Ken, Ramakrishnan, Ramkumar, Greenwood, David G., Goodship, Vannessa, Shrouti, Chetan, Chetwynd, D. G. and Langlois, Paul (2019) The wear resistance improvement of fibre reinforced polymer composite gears. Wear, 426-427 (Part B). pp. 1033-1039. doi:10.1016/j.wear.2018.12.043

McDonald, M. G. and Živanović, Stana (2017) Data for Measuring ground reaction force and quantifying variability in jumping and bobbing actions. [Dataset]

McEwen, Iain, Cooper, David E., Warnett, Jason M., Kourra, Nadia, Williams, M. A. and Gibbons, Gregory John (2018) Design & manufacture of a high-performance bicycle crank by additive manufacturing. Applied Sciences, 8 (8). 1360. doi:https://doi.org/10.3390/app8081360

Merola, Giovanni, Sciuto, Antonio, Pirozzi, Felice, Andreuccetti, Jacopo, Pignata, Giusto, Corcione, Francesco, Milone, Marco, Domenico De Palma, Giovanni, Castaldo, Rossana, Pecchia, Leandro, Ceccarelli, Graziano and Bracale, Umberto (2019) Is robotic right colectomy economically sustainable? A multicentre retrospective comparative study and cost analysis. Surgical Endoscopy . doi:10.1007/s00464-019-07193-z (In Press)

Metcalf, Steven J. (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.

Michael, John and Salice, Alessandro (2016) The sense of commitment in human-robot interaction. International Journal of Social Robotics .

Mien, Van, Franciosa, Pasquale and Ceglarek, Darek (2016) Fault diagnosis and fault-tolerant control of uncertain robot manipulators using high-order sliding mode. Mathematical Problems in Engineering, 2016 . pp. 1-14. 7926280. doi:10.1155/2016/7926280

Mien, Van, Franciosa, Pasquale and Ceglarek, Darek (2016) Rolling element bearing fault diagnosis using integrated nonlocal means denoising with modified morphology filter operators. Mathematical Problems in Engineering, 2016 . pp. 1-14. 9657285. doi:10.1155/2016/9657285

Moreno, Carlos, Winnett, James and Williams, T. (2021) On the effect of anisotropy on the performance and simulation of shrinking tubes used as energy absorbers for railway vehicles. Thin-Walled Structures, 161 . 107513. doi:10.1016/j.tws.2021.107513

Moss, Roger W., Henshall, Paul, Arya, Farid, Shire, G. S. F., Eames, Philip C. and Hyde, T. (2018) Data for Simulator testing of evacuated flat plate solar collectors for industrial heat and building integration. [Dataset]

Moss, Roger W., Henshall, Paul, Arya, Farid, Shire, G. S. F., Eames, Philip C. and Hyde, T. (2018) Simulator testing of evacuated flat plate solar collectors for industrial heat and building integration. Solar Energy, 164 . pp. 109-118. doi:10.1016/j.solener.2018.02.004

Moss, Roger W., Shire, G. S. F., Eames, P. C., Henshall, P., Hyde, T. and Arya, F. (2018) Design and commissioning of a virtual image solar simulator for testing thermal collectors. Solar Energy, 159 . pp. 234-242. doi:10.1016/j.solener.2017.10.044

Moss, Roger W., Shire, G. S. F., Eames, Philip C., Henshall, Paul, Hyde, T. and Arya, Farid (2017) Data for Design and commissioning of a virtual image solar simulator for testing thermal collectors. [Dataset]

Moss, Roger W., Shire, G. S. F., Henshall, P., Eames, P. C., Arya, F. and Hyde, T. (2018) Design and fabrication of a hydroformed absorber for an evacuated flat plate solar collector. Applied Thermal Engineering, 138 . pp. 456-464. doi:10.1016/j.applthermaleng.2018.04.033

Moss, Roger W., Shire, G. S. F., Henshall, Paul, Eames, P. C., Arya, Farid and Hyde, T. (2017) Optimal passage size for solar collector microchannel and tube-on-plate absorbers. Solar Energy, 153 . pp. 718-731. doi:10.1016/j.solener.2017.05.030

Moss, Roger W., Shire, G. S. F., Henshall, Paul, Eames, P. C., Farid, Arya and Hyde, T. (2017) Data for Optimal passage size for solar collector microchannel and tube-on-plate absorbers. [Dataset]

Moss, Roger W., Shire, Stan, Henshall, Paul, Arya, Farid, Eames, Phil and Hyde, Trevor (2018) Data for Performance of evacuated flat plate solar thermal collectors. [Dataset]

Moss, Roger W., Shire, Stan, Henshall, Paul, Arya, Farid, Eames, Philip and Hyde, Trevor (2018) Performance of evacuated flat plate solar thermal collectors. Thermal Science and Engineering Progress, 8 . pp. 296-306. doi:10.1016/j.tsep.2018.09.003

Mottram, J. Toby (2010) Prediction of net-tension strength for multirow bolted connections of pultruded material using the Hart-Smith semi-empirical modeling approach. Journal of Composites for Construction, 14 (1). pp. 105-114. doi:10.1061/(ASCE)CC.1943-5614.0000043

Mu, Mulan, Teblum, Eti, Figiel, Lukasz, Nessim , Gilbert and McNally, Tony (2018) Correlation between MWCNT aspect ratio and the mechanical properties of composites of PMMA and MWCNTs. Materials Research Express, 5 (4). 045305. doi:10.1088/2053-1591/aab82d

Murthy, Keshaviah Krishna (1967) Some studies in optimum and self-adaptive control systems. PhD thesis, University of Warwick.

N

Nahian, Syed Abu, Quang Truong, Dinh, Hoang Vu, Dao and Kyoung Kwan, Ahn (2020) An unknown input observer-EFIR combined estimator for electro-hydraulic actuator in sensor fault tolerant control application. IEEE/ASME Transactions on Mechatronics . (In Press)

Nahian, Syed Abu, Truong, Dinh Quang, Chowdhury, Puja, Das, Debdatta and Ahn, Kyoung Kwan (2016) Modeling and fault tolerant control of an electro-hydraulic actuator. International Journal of Precision Engineering and Manufacturing, 17 (10). pp. 1285-1297.

Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.

Nguyen, Anh-Tu, Dinh, Truong Quang, Guerra, Thierry-Marie and Pan, Juntao (2021) Takagi-Sugeno fuzzy unknown input observers to estimate nonlinear dynamics of autonomous ground vehicles : theory and real-time verification. IEEE/ASME Transactions on Mechatronics . doi:10.1109/TMECH.2020.3049070 (In Press)

Nguyen, Khoa Dang, Ha, Cheolkeun, Dinh, Quang Truong and Marco, James (2018) Synchronization controller for a 3-RRR parallel manipulator. International Journal of Precision Engineering and Manufacturing, 19 (3). pp. 339-347. doi:10.1007/s12541-018-0041-z

Niu, Hui (2017) Quantifying the touch feel perception : tribological aspects. PhD thesis, University of Warwick.

Nwufoh, Charles Nnonyelum J. (1992) Performance evaluation and development of a synchro-drive mobile robot. PhD thesis, University of Warwick.

O

Oswald, Andrew J. , Oswald, James I. and Ashraf-Ball, Hezlin (2009) Hydrogen transport and the spatial requirements of renewable energy. Working Paper. Coventry: University of Warwick, Department of Economics. Warwick economic research papers (No.903).

Oyinlola, Muyiwa Adeyinka and Shire, G. S. F. (2018) Characterising micro-channel absorber plates for building integrated solar thermal collectors. Building Services Engineering Research and Technology . doi:10.1177/0143624418783173 (In Press)

Ozkat, Erkan Caner (2019) A physics-driven model for the closed-loop quality control of remote laser welding. PhD thesis, University of Warwick.

P

Padrino-Inciarte, Juan C., Sprittles, James E. and Lockerby, Duncan A. (2019) Thermophoresis of a spherical particle : modelling through moment-based, macroscopic transport equations. Journal of Fluid Mechanics, 862 . pp. 312-347. doi:10.1017/jfm.2018.907

Pasco, Corentin, Khan, Muhammad Aurangzeb, Gupta, Jaipal and Kendall, Kenneth N. (2018) Experimental investigation on interply friction properties of thermoset prepreg systems. Journal of Composite Materials . doi:10.1177/0021998318781706

Pastor-Fernandez, Carlos, Widanage, Widanalage Dhammika, Chouchelamane, G. H. and Marco, James (2016) A SoH diagnosis and prognosis method to identify and quantify degradation modes in Li-ion batteries using the IC/DV technique. In: IET Hybrid Electric Vehicle Conference, London, UK, 2-3 Nov 2016

Pilz da Cunha, Marina, Kandail, Harkamaljot S., den Toonder, Jaap M. J. and Schenning, Albert P. H. J. (2020) An artificial aquatic polyp that wirelessly attracts, grasps, and releases objects. Proceedings of the National Academy of Sciences of the United States of America, 117 (30). pp. 17571-17577. doi:10.1073/pnas.2004748117

Piper, Jericho R., Cletheroe, L., Taylor, C. G. P., Metherell, A. J., Weinstein, J. A., Sazanovich, I. V. and Ward, Michael D. (2017) Photoinduced energy- and electron-transfer from a photoactive coordination cage to bound guests. Chemical Communications, 53 . pp. 408-411. doi:10.1039/c6cc09298e

Poluektov, Mikhail, Freidin, Alexander and Figiel, Lukasz (2018) Modelling stress-affected chemical reactions in non-linear viscoelastic solids with application to lithiation reaction in spherical Si particles. International Journal of Engineering Science, 128 . pp. 44-62. doi:10.1016/j.ijengsci.2018.03.007

Powell, Henry and Michael, John (2019) Feeling committed to a robot : why, what, when, and how? Philosophical Transactions of the Royal Society B: Biological Sciences, 374 (1771). doi:10.1098/rstb.2018.0039 (In Press)

Q

Qi, Pengyuan and Zhao, Xiaowei (2019) Flight control for very flexible aircraft using model-free adaptive control. Journal of Guidance, Control, and Dynamics . pp. 1-12. doi:10.2514/1.G004761 (In Press)

R

Radanliev, Petar, De Roure, David, Page, Kevin, Van Kleek, Max, Santos, Omar, Maddox, La’Treall, Burnap, Peter, Anthi, Eirini and Maple, Carsten (2021) Design of a dynamic and self-adapting system, supported with artificial intelligence, machine learning and real-time intelligence for predictive cyber risk analytics in extreme environments – cyber risk in the colonisation of Mars. Safety in Extreme Environments . doi:10.1007/s42797-021-00025-1 (In Press)

Reguly, Istvan Z., Mudalige, Gihan R., Bertolli, Carlo, Giles, Michael B., Betts, Adam, Kelly, Paul H. J. and Radford, David (2016) Acceleration of a full-scale industrial CFD application with OP2. IEEE Transactions on Parallel and Distributed Systems, 27 (5). pp. 1265-1278. doi:10.1109/TPDS.2015.2453972

Revell, Philip Scott (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.

Ridge, Alex, Ademi, Sul, McMahon, Richard A. and Kelly, H-P. (2018) A novel axial flux permanent magnet generator for wind turbines. In: PEMD 2018, Liverpool, UK, 17-19 Apr 2018 (In Press)

Ridge, Alex, Ademi, Sul, McMahon, Richard A. and Kelly, Hugh-Peter (2019) Ferrite-based axial flux permanent magnet generator for wind turbines. Journal of Engineering, 2019 (17). pp. 3942-3946. doi:10.1049/joe.2018.8176

Rivero Pacho, Angeles M., Critoph, Robert E. and Metcalf, Steven J. (2017) Modelling and development of a generator for a domestic gas-fired carbon-ammonia adsorption heat pump. Renewable Energy, 110 . pp. 180-185. doi:10.1016/j.renene.2017.03.089

Rivero Pacho, Angeles M., Critoph, Robert E. and Metcalf, Steven J. (2015) Study of thermal conductivity and geometry wall contact resistance effect of granular active carbon for refrigeration and heat pumping systems. Heat Transfer Engineering, 37 (7-8). pp. 720-728. doi:10.1080/01457632.2015.1067094

Robertson, James Ritchie (1971) A new transfer function analyser. PhD thesis, University of Warwick.

Rodrigues, M., McGordon, Andrew, Gest, Graham and Marco, James (2017) Developing and testing of control software framework for autonomous ground vehicle. In: IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC), Coimbra, Portugal, 26-28 May 2017 (In Press)

Rodriguez, Bruno J., Schiller, Tara L., Proprentner, Daniela, Walker, Marc, Low, C. T. John, Shollock, Barbara A., Sun, Hailin and Navabpour, Parnia (2020) Effect of chromium doping on high temperature tribological properties of silicon-doped diamond-like carbon films. Tribology International, 152 . 106546. doi:10.1016/j.triboint.2020.106546

Rubio-Garcia, Javier, Kucernak, Anthony, Parra-Puerto, Andres, Liu, Rutao and Chakrabarti, Barun (2020) Hydrogen/functionalized benzoquinone for a high-performance regenerative fuel cell as a potential large-scale energy storage platform. Journal of Materials Chemistry A, 8 (7). pp. 3933-3941. doi:10.1039/C9TA12396B

S

Saar, Kadi Liis, Müller, Thomas, Charmet, Jérôme, Challa, Pavan K. and Knowles, Tuomas P. J. (2018) Enhancing the resolution of micro free flow electrophoresis through spatially controlled sample injection. Analytical Chemistry . doi:10.1021/acs.analchem.8b01205 (In Press)

Sawlekar, Rucha, Montefusco, Francesco, Kulkarni, Vishwesh V. and Bates, Declan (2016) Implementing nonlinear feedback controllers using DNA strand displacement reactions. IEEE Transactions on NanoBioscience, 15 (5). 443 -454. doi:10.1109/TNB.2016.2560764

Shah, Raja Mazuir Bin Raja Ahsan, McGordon, Andrew, Amor-Segan, Mark and Jennings, P. A. (Paul A.) (2013) Micro gas turbine range extender : validation techniques for automotive applications. In: 4th Hybrid Electric Vehicle Conference (HEVC 2013), London, United Kingdom, 6-7 Nov 2013. Published in: HEVC 2013 : 4th Hybrid and Electric Vehicles Conference. ISBN 9781849197755. doi:10.1049/cp.2013.1913

Shand, Andrew Michael (1996) The investigation, development and optimisation of global laser diagnostics for combustion and related flow applications. PhD thesis, University of Warwick.

Shen, Jialong, Zhou, Lei, Rowshandel, H., Nicholson, G. L. and Davis, Claire (2019) Prediction of RCF clustered cracks dimensions using an ACFM sensor and influence of crack length and vertical angle. Nondestructive Testing and Evaluation . pp. 1-18. doi:10.1080/10589759.2019.1611817 (In Press)

Shi, Kai, Dinh, Truong Quang and Marco, James (2020) Power loss analysis of bidirectional ACFC-SR based active cell balancing system. In: IFAC World Congress 2020, Virtual conference, 11-17 Jul 2020 (In Press)

Shi, Yanglin (2016) Modelling and optimization of remote laser welding galvanized steels using statistical methodologies. MSc thesis, University of Warwick.

Shire, G. S. F., Quarini, Giuseppe Leonardo and Evans, T. S. (2009) Pressure drop of flowing ice slurries in industrial heat exchangers. Applied Thermal Engineering, Vol.29 (No.8-9). pp. 1500-1506. doi:10.1016/j.applthermaleng.2008.06.033

Shire, G. S. F., Quarini, Giuseppe Leonardo, Rhys, T. D. L. and Evans, T. S. (2008) The anomalous pressure drop behaviour of ice slurries flowing through constrictions. International Journal of Multiphase Flow, Vol.34 (No.5). pp. 510-515. doi:10.1016/j.ijmultiphaseflow.2007.11.007

Shojaei, Sina, McGordon, Andrew, Robinson, Simon, Marco, James and Jennings, P. A. (Paul A.) (2017) Developing a model for analysis of the cooling loads of a hybrid electric vehicle by using co-simulations of verified submodels. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering . pp. 1-19. doi:10.1177/0954407017707099

Siamantouras, Eleftherios, Hills, Claire E., Younis, Mustafa Y. G., Squires, Paul E. and Liu, Kuo-Kang (2014) Quantitative investigation of calcimimetic R568 on beta cell adhesion and mechanics using AFM single-cell force spectroscopy. FEBS Letters, Volume 588 (Number 7). pp. 1173-1178. doi:10.1016/j.febslet.2014.02.058

Skeen, Andrew (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.

Small, N. R., Williams, David K., Roy, Rajat and Hazra, S. K. (2020) Accounting for the effect of heterogeneous plastic deformation on the formability of aluminium and steel sheets. International Journal of Advanced Manufacturing Technology, 109 . pp. 397-410. doi:10.1007/s00170-020-05372-0

Small, Neil and Hazra, S. K. (2019) Data for Digital image correlation of Marciniak tests for AA6111-T4 (1.2mm). [Dataset]

Smith, Andrew, Kelly, Nicole L., Figiel, Lukasz, Wan, Chaoying, Hanna, John V., Farris, Stefano and McNally, Tony (2020) Graphene-oxide functionalized with 2-Ureido-4[1H]-pyrimidinone for production of nacre-like films. ACS Applied Nano Materials . doi:10.1021/acsanm.0c01488 (In Press)

Smith, S. T. (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.

Sokolov, Mikhail, Franciosa, Pasquale, Sun, Tianzhu and Ceglarek, Dariusz (2020) Applying optical coherence tomography for weld depth monitoring in remote laser welding of automotive battery tab connectors. Journal of Laser Applications, 33 (1). 012028. doi:10.2351/7.0000336

Steer, Barry (1985) Navigation for the guidance of a mobile robot. PhD thesis, University of Warwick.

Stephenson, David, Kermode, James R. and Lockerby, Duncan A. (2018) Accelerating multiscale modelling of fluids with on-the-fly Gaussian process regression. Microfluidics and Nanofluidics, 22 . 139. doi:10.1007/s10404-018-2164-z

Stępień, Maja, Choon, Gabriel, De Focatiis, Davide and Figiel, Lukasz (2020) Modeling non-linear rheology of PLLA : comparison of Giesekus and Rolie-Poly constitutive models. International Journal of Biobased Plastics . doi:10.1080/24759651.2020.1808367

Suhaimi, Zakiah Syamra’ binti (2019) Exploring the relationship between interaction capabilities and SMEs’ participation in larger customers’ supply chains. PhD thesis, University of Warwick.

Sultanova, Leyla and Figiel, Lukasz (2021) Microscale diffusion-mechanics model for a polymer-based solid-state battery cathode. Computational Materials Science, 186 . 109990. doi:10.1016/j.commatsci.2020.109990

Summerfield, Peter Humphrey (1984) A systems approach to the control of cutting tools within a large-scale manufacturing environment. PhD thesis, University of Warwick.

T

Tait, Edward W., Racliff, Laura E., Payne, Mike C., Haynes, Peter D. and Hine, Nicholas (2016) Simulation of electron energy loss spectra of nanomaterials with linear-scaling density functional theory. Journal of Physics: Condensed Matter, 28 (19). doi:10.1088/0953-8984/28/19/195202

Tamainot-Telto, Zacharie (2019) Efficient solar driven air conditioning system for hot climate : case study of Doha. In: 12th International Conference on Solar Energy for Buildings and Industry (EUROSUN2018), Rapperswil, Switzerland, 10-13 Sep 2018. Published in: Proceedings of EUROSUN2018 doi:10.18086/eurosun2018.04.12

Tamainot-Telto, Zacharie (2016) Novel method using Dubinin-Astakhov theory in sorption reactor design for refrigeration and heat pump applications. Applied Thermal Engineering, 107 . pp. 1123-1129. doi:10.1016/j.applthermaleng.2016.07.073

Tamainot-Telto, Zacharie, Metcalf, Steven J., Critoph, Robert E., Zhong, Y. and Thorpe, Roger (2009) Carbon-ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping. International Journal of Refrigeration, Vol.32 (No.6). pp. 1212-1229. doi:10.1016/j.ijrefrig.2009.01.008

Tan, Xiaoyan, Zhang, Binjia, Chen, Ling, Li, Xiaoxi, Li, Lin and Xie, Fengwei (2015) Effect of planetary ball-milling on multi-scale structures and pasting properties of waxy and high-amylose cornstarches. Innovative Food Science & Emerging Technologies, 30 . pp. 198-207. doi:10.1016/j.ifset.2015.03.013

Tandy, Michael J., Winkvist, Stefan and Young, Ken (2010) Competing in the RoboCup Rescue Robot League. In: Robotics for Risky Interventions and Surveillance of the Environment (RISE), Sheffield Hallam University, Sheffield, England, 20-21 January 2010. Published in: Proceedings of Robotics for Risky Interventions and Surveillance of the Environment, Vol.2010

Tang, Fei, Hu, Peng, Zhang, Jianping and Wen, Jennifer X. (2020) Heat fluxes under the ceiling induced by wall fires with various burner aspect ratios in a channel. Proceedings of the Combustion Institute . doi:10.1016/j.proci.2020.05.029 (In Press)

Tang, Xiaopeng, Liu, Kailong, Wang, Xin, Liu, Boyang, Gao, Furong and Widanage, Widanalage Dhammika (2019) Real-time aging trajectory prediction using a base model-oriented gradient-correction particle filter for Lithium-ion batteries. Journal of Power Sources, 440 . 227118. doi:10.1016/j.jpowsour.2019.227118

Thamotheram, Craig P. (2012) Essays in robust control. PhD thesis, University of Warwick.

Thornby, John Albert, MacKay, Robert S. and Williams, M. A. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. doi:10.1093/imamat/hxv020

Tian, Wenjie, Yin, Fuwen, Liu, Haitao, Li, Jinhe, Li, Qing, Huang, Tian and Chetwynd, D. G. (2016) Kinematic calibration of a 3-DOF spindle head using a double ball bar. Mechanism and Machine Theory, 102 . pp. 167-178. doi:10.1016/j.mechmachtheory.2016.04.008

Tian, Y. (Yuan) and Zhao, Changying (2009) Heat transfer analysis for phase change materials (PCMs). In: The 11th International Conference on Energy Storage (Effstock 2009), Stockholm, Sweden, Jul 14-17, 2009. Published in: Effstock Conference Proceedings 2009 (No.28).

Tian, Y. (Yuan) and Zhao, Changying (2009) Numerical investigations of heat transfer in phase change materials using non-equilibrium model. In: The Eleventh UK National Heat Transfer Conference, London, UK , 6-8 September 2009. Published in: Proceedings of 11th UK National Heat Transfer Conference

Tian, Y. (Yuan) and Zhao, Changying (2013) A review of solar collectors and thermal energy storage in solar thermal applications. Applied Energy, Vol.104 . pp. 538-553. doi:10.1016/j.apenergy.2012.11.051

Tian, Y. (Yuan), Zhao, Changying and Lapkin, Alexei (2012) Exergy optimisation for cascaded thermal storage. In: 12th International Conference on Energy Storage (InnoStock 2012), Lleida, Spain, 16-19 May 2012. Published in: Proceedings of the 12th International Conference on Energy Storage

Tian, Yanling, Liu, X., Zhang, D. and Chetwynd, D. G. (2009) Dynamic modelling of the fidelity of random surface measurement by the stylus method. Wear, Vol.266 (No.5-6). pp. 555-559. doi:10.1016/j.wear.2008.04.061

Tian, Yanling, Liu, Yunpeng, Wang, Fujun, Jing, Xiubing, Zhang, Dawei and Liu, Xianping (2017) Modelling and analyses of helical milling process. The International Journal of Advanced Manufacturing Technology, 90 (1-4). pp. 1003-1022. doi:10.1007/s00170-016-9418-2

Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G. (2009) Design and forward kinematics of the compliant micro-manipulator with lever mechanisms. Precision Engineering, Vol.33 (No.4). pp. 466-475. doi:10.1016/j.precisioneng.2009.01.003

Tian, Yanling, Zhou, Chongkai, Wang, Fujun, Lu, Kangkang, Yuan, Yanjie, Yang, Mingxuan and Zhang, Dawei (2019) Design of a flexure-based mechanism possessing low stiffness and constant force. Review of Scientific Instruments, 90 (10). 105005. doi:10.1063/1.5119276

Tong, Xin (2017) Control of large offshore wind turbines. PhD thesis, University of Warwick.

Tong, Xin and Zhao, Xiaowei (2018) Power generation control of a monopile hydrostatic wind turbine using an H∞ loop-shaping torque controller and an LPV pitch controller. IEEE Transactions on Control Systems Technology, 26 (6). 2165 -2172. doi:10.1109/TCST.2017.2749562

Tong, Xin and Zhao, Xiaowei (2021) Vibration and power regulation control of a floating wind turbine with hydrostatic transmission. Renewable Energy . doi:10.1016/j.renene.2020.12.009 (In Press)

Tong, Xin, Zhao, Xiaowei and Karcanias, Aris (2018) Passive vibration control of an offshore floating hydrostatic wind turbine model. Wind Energy . doi:10.1002/we.2188 (In Press)

Tong, Xin, Zhao, Xiaowei and Zhao, Shi (2017) Load reduction of a monopile wind turbine tower using optimal tuned mass dampers. International Journal of Control, 90 (7). pp. 1283-1298. doi:10.1080/00207179.2015.1124143

Tran, Trung Hieu, French, Simon, Ashman, Rhys and Kent, Edward (2018) Impact of compressor failures on gas transmission network capability. Applied Mathematical Modelling, 55 . pp. 741-757. doi:10.1016/j.apm.2017.11.034

Tripathy, Yashraj, McGordon, Andrew and Barai, Anup (2020) Improving accessible capacity tracking at low ambient temperatures for range estimation of battery electric vehicles. Energies, 13 (8). 2021. doi:10.3390/en13082021

Troisi, Alessandro and Shaw, Alex (2016) Very large π-conjugation despite strong nonplanarity : a path for designing new semiconducting polymers. The Journal of Physical Chemistry Letters, 7 (22). pp. 4689-4694. doi:10.1021/acs.jpclett.6b02367

Trương, Đình Quang, Truong, Bui Ngoc Minh, Trung, Nguyen Thanh, Nahian, Syed Abu and Ahn, Kyoung Kwan (2017) Force reflecting joystick control for applications to bilateral teleoperation in construction machinery. International Journal of Precision Engineering and Manufacturing, 18 (3). pp. 301-315. doi:10.1007/s12541-017-0038-z

V

Vitolo, F., Franciosa, Pasquale, Ceglarek, Darek, Pantalano, S. and De Martino, M. (2019) A generalised multi-attribute task sequencing approach for robotics optical inspection systems. In: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT), Naples, Italy, 4-6 Jun 2019. Published in: 2019 II Workshop on Metrology for Industry 4.0 and IoT (MetroInd4.0&IoT) ISBN 9781728104300. doi:10.1109/METROI4.2019.8792869

van der Pal, Michel and Critoph, Robert E. (2017) Performance of CaCl 2 -reactor for application in ammonia-salt based thermal transformers. Applied Thermal Engineering, 126 . pp. 518-524. doi:10.1016/j.applthermaleng.2017.07.086

W

Walmsley, Nigel (1986) The numerical representation of pump-turbine performance characteristics. PhD thesis, University of Warwick.

Wang, Jidai, Lu, Kunpeng, Ma, Lan, Wang, Jihong, Dooner, Mark, Miao, Shihong, Li, Jian and Wang, Dan (2017) Overview of compressed air energy storage and technology development. Energies, 10 (7). 991. doi:10.3390/en10070991

Wang, L. W., Tamainot-Telto, Zacharie, Metcalf, Steven J., Critoph, Robert E. and Wang, R. Z. (2010) Anisotropic thermal conductivity and permeability of compacted expanded natural graphite. Applied Thermal Engineering, Vol.30 (No.13). pp. 1805-1811. doi:10.1016/j.applthermaleng.2010.04.014

Wang, Meng, Yang, Zhen, Yang, Chengjuan, Wu, Sibo, Zhang, Dawei, Wang, Jihui, Tian, Yanling and Liu, Xianping (2020) The investigation of mechanical and thermal properties of super-hydrophobic nitinol surfaces fabricated by hybrid methods of laser irradiation and carbon ion implantation. Applied Surface Science, 527 . 146889. doi:10.1016/j.apsusc.2020.146889

Wang, Wenjie , Jiang, Yi and Thomas, Peter J. (2021) Structural design and physical mechanism of axial and radial sandwich resonators with piezoelectric ceramics : a review. Sensors, 21 (4). e1112. doi:10.3390/s21041112

Wang, Wenjie , Shi, Weihao, Thomas, P. J. (Peter J.) and Yang, Mingsui (2019) Design and analysis of two piezoelectric cymbal transducers with metal ring and add mass. Sensors, 19 (1). 137. doi:10.3390/s19010137

Wang, Wenjie and Thomas, P. J. (Peter J.) (2018) Acoustic improvement of stator–rotor interaction with nonuniform trailing edge blowing. Applied Sciences, 8 (6). 994. doi:10.3390/app8060994

Wang, Yue (2016) Modelling and simulation study of IGCC power plant with activated carbon-based carbon capture process. PhD thesis, University of Warwick.

Wang, Zhixin (2017) Direct numerical simulations of turbulent pipe flow with 90° bends. PhD thesis, University of Warwick.

Waterson, Michael (2017) The characteristics of electricity storage, renewables and markets. Energy Policy, 104 . pp. 466-473. doi:10.1016/j.enpol.2017.01.025

Wei, Xing, Ng, Bing Feng and Zhao, Xiaowei (2019) Aeroelastic load control of large and flexible wind turbines through mechanically driven flaps. Journal of the Franklin Institute . doi:10.1016/j.jfranklin.2019.02.030 (In Press)

Wei, Xing and Zhao, Xiaowei (2020) Vibration suppression of a floating hydrostatic wind turbine model using bidirectional tuned liquid column mass damper. Wind Energy . doi:10.1002/we.2524 (In Press)

Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew J. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. doi:10.1016/j.foodqual.2008.03.004

Weng, Lingtao, Gao, Weiguo, Lv, Zhanshan, Zhang, Dawei, Liu, Teng, Wang, Yu, Qi, Xiangyang and Tian, Yanling (2018) Influence of external heat sources on volumetric thermal errors of precision machine tools. The International Journal of Advanced Manufacturing Technology, 99 (1-4). pp. 475-495. doi:10.1007/s00170-018-2462-3

Widanage, Widanalage Dhammika, Stoev, Julian, Mulders, Anne van, Schoukens, J. (Johan) and Pinte, Gregory (2011) Nonlinear system-identification of the filling phase of a wet-clutch system. Control Engineering Practice, Volume 19 (Number 12). pp. 1506-1516. doi:10.1016/j.conengprac.2011.09.002

Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.

Winkvist, Stefan (2013) Low computational SLAM for an autonomous indoor aerial inspection vehicle. PhD thesis, University of Warwick.

Wojcik, Jacek D. and Wang , Jihong (2017) Technical feasibility study of thermal energy storage integration into the conventional power plant cycle. Energies, 10 (2). 205. doi:10.3390/en10020205

Woodman, Roger, Winfield, Alan, Harper, Chris and Fraser, Mike (2010) Safety control architecture for personal robots : behavioural suppression with deliberative control. In: 2010 Seventh IARP Workshop on Technical Challenges for Dependable Robots in Human Environments (DRHE), Toulouse, France, 16-17 Jun 2010

Woodman, Roger, Winfield, Alan F. T., Harper, Chris and Fraser, Mike (2012) Building safer robots : safety driven control. The International Journal of Robotics Research, 31 (13). pp. 1603-1626. doi:10.1177/0278364912459665

Woodman, Roger, Winfield, Alan F. T., Harper, Chris and Fraser, Mike (2011) Online hazard analysis for autonomous robots. In: Groß, R. and Alboul, L. and Melhuish, C. and Witkowski, M. and Prescott, T. J. and Penders, J., (eds.) Towards Autonomous Robotic Systems. Lecture Notes in Computer Science, 6856 . Berlin, Heidelberg: Springer, pp. 406-407. ISBN 9783642232312

Wu, Long, Wang, Guofeng, Liu, Haitao and Huang, Tian (2018) An approach for elastodynamic modeling of hybrid robots based on substructure synthesis technique. Mechanism and Machine Theory, 123 . pp. 124-136. doi:10.1016/j.mechmachtheory.2017.12.019

X

Xu, Tianhua, Shevchenko, Nikita A., Liu, Zhe and Bayvel, Polina (2019) Information rates in EDFA and raman amplified optical communication systems using nonlinearity compensation. In: Workshop on Information Optics (WIO), Sweden , 1-5 Jul 2019. Published in: Workshop on Information Optics (WIO) (In Press)

Y

Yan, Hua, Chen, Yunfei and Yang, Shuang-Hua (2020) UAV-enabled wireless power transfer with base station charging and UAV power consumption. IEEE Transactions on Vehicular Technology . p. 1. doi:10.1109/TVT.2020.3015246 (In Press)

Yang, Shuofei, Sun, Tao, Huang, Tian, Li, Qinchuan and Gu, Dongbing (2016) A finite screw approach to type synthesis of three-DOF translational parallel mechanisms. Mechanism and Machine Theory, 104 . pp. 405-419. doi:10.1016/j.mechmachtheory.2016.02.018

Yang, Zhen, Liu, Xianping and Tian, Yanling (2020) A contrastive investigation on anticorrosive performance of laser-induced super-hydrophobic and oil-infused slippery coatings. Progress in Organic Coatings, 138 . 105313. doi:10.1016/j.porgcoat.2019.105313

Yazdani, D., Cheng, R. and Branke, Jürgen (2020) Adaptive control of sub-populations in evolutionary dynamic optimization. IEEE Transactions on Cybernetics . (In Press)

Yin, F. W., Tian, W. J, Liu, H. T., Huang, Tian and Chetwynd, D. G. (2020) A screw theory based approach to determining the identifiable parameters for calibration of parallel manipulators. Mechanism and Machine Theory, 145 . doi:10.1016/j.mechmachtheory.2019.103665

Yin, Xiuxing , Tong, Xin, Zhao, Xiaowei and Karcanias, Aris (2019) Maximum power generation control of a hybrid wind turbine transmission system based on H∞ loop-shaping approach. IEEE Transactions on Sustainable Energy . p. 1. doi:10.1109/TSTE.2019.2897549

Yin, Xiuxing and Zhao, Xiaowei (2019) ADV preview based nonlinear predictive control for maximizing power generation of a tidal turbine with hydrostatic transmission. IEEE Transactions on Energy Conversion . doi:10.1109/TEC.2019.2938062

Yin, Xiuxing and Zhao, Xiaowei (2019) Big data driven multi-objective predictions for offshore wind farm based on machine learning algorithms. Energy, 186 . 115704. doi:10.1016/j.energy.2019.07.034

Yin, Xiuxing and Zhao, Xiaowei (2019) Composite hierarchical pitch angle control for a tidal turbine based on the uncertainty and disturbance estimator. IEEE Transactions on Industrial Electronics . pp. 1-11. doi:10.1109/TIE.2019.2896261

Yin, Xiuxing and Zhao, Xiaowei (2021) Data driven learning model predictive control of offshore wind farms. International Journal of Electrical Power & Energy Systems, 127 . 106639. doi:10.1016/j.ijepes.2020.106639

Yin, Xiuxing and Zhao, Xiaowei (2020) Deep neural learning based distributed predictive control for offshore wind farm using high fidelity LES data. IEEE Transactions on Industrial Electronics . doi:10.1109/TIE.2020.2979560 (In Press)

Yin, Xiuxing and Zhao, Xiaowei (2019) Sensor-less maximum power extraction control of a hydrostatic tidal turbine based on adaptive extreme learning machine. IEEE Transactions on Sustainable Energy . p. 1. doi:10.1109/TSTE.2019.2894064 (In Press)

Yin, Xiuxing , Zhao, Xiaowei, Lin, Jin and Karcanias, Aris (2020) Reliability aware multi-objective predictive control for wind farm based on machine learning and heuristic optimizations. Energy . 117739. doi:10.1016/j.energy.2020.117739 (In Press)

Yu, Cheng-Kung (1985) Identification and design of control systems. PhD thesis, University of Warwick.

Z

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Zhang, Guan H. and Zhao, Changying (2011) Thermal and rheological properties of microencapsulated phase change materials. Renewable Energy, Vol.36 (No.11). pp. 2959-2966. doi:10.1016/j.renene.2011.04.002

Zhang, Guanhua, (Researcher in engineering) (2013) Fabrication, characterization and thermo-physical properties of micro- and nano- scaled phase change materials for thermal energy storage. PhD thesis, University of Warwick.

Zhang, H. L., Van Gerven, T., Baeyens, Jan and Degrève, J. (2014) Photovoltaics : reviewing the European feed-in-tariffs and changing PV efficiencies and costs. The Scientific World Journal, Volume 2014 . Article number 404913. doi:10.1155/2014/404913

Zhang, Jincheng and Zhao, Xiaowei (2021) Spatiotemporal wind field prediction based on physics-informed deep learning and LIDAR measurements. Applied Energy, 288 . 116641. doi:10.1016/j.apenergy.2021.116641

Zhang, Jincheng, Zhao, Xiaowei and Wei, Xing (2020) Data-driven structural control of monopile wind turbine towers based on machine learning. In: The 21st IFAC World Congress, Berlin, Germany, 12-17 Jul 2020 (In Press)

Zhang, Jincheng, Zhao, Xiaowei and Wei, Xing (2020) Reinforcement learning-based structural control of floating wind turbines. IEEE Transactions on Systems, Man, and Cybernetics: Systems . pp. 1-11. doi:10.1109/TSMC.2020.3032622

Zhang, Li, Gao, Weiguo, Zhang, Dawei and Tian, Yanling (2016) Prediction of dynamic milling stability considering time variation of deflection and dynamic characteristics in thin-walled component milling process. Shock and Vibration, 2016 . 3984186. doi:10.1155/2016/3984186

Zhang, Rui, Chen, Qingming, Liu, Kai, Chen, Zefeng, Li, Kaidi, Zhang, Xuming, Xu, Jianbin and Pickwell-MacPherson, Emma (2019) Terahertz microfluidic metamaterial biosensor for sensitive detection of small volume liquid samples. IEEE Transactions on Terahertz Science and Technology . (In Press)

Zhang, Xizhe, Khastgir, Siddartha and Jennings, Paul. A. (2020) Scenario description language for automated driving systems : a two level abstraction approach. In: IEEE International Conference on Systems, Man, and Cybernetics , Virtual conference, 11-14 Oct 2020. Published in: IEEE SMC 2020

Zhang, Yangming, Zhao, Xiaowei and Wei, Xing (2020) Robust structural control of an underactuated floating wind turbine. Wind Energy . doi:10.1002/we.2550 (In Press)

Zhang, Ye, Purssell, Chris, Mao, Ken and Leigh, Simon J. (2020) A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears. Tribology International, 141 . 105953. doi:10.1016/j.triboint.2019.105953

Zhang, Yifan, Wang, Ping, Liu, Teng, Gao, Weiguo, Chang, Wenfen, Tian, Yanling and Zhang, Dawei (2018) Active and intelligent control onto thermal behaviors of a motorized spindle unit. The International Journal of Advanced Manufacturing Technology, 98 (9-12). pp. 3133-3146. doi:10.1007/s00170-018-2425-8

Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.

Zhao, Changying, Lu, Wei and Tian, Y. (Yuan) (2010) Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs). Solar Energy, Vol.84 (No.8). pp. 1402-1412. doi:10.1016/j.solener.2010.04.022

Zhao, Changying and Zhang, Guan H. (2011) Review on microencapsulated phase change materials (MEPCMs) : fabrication, characterization and applications. Renewable and Sustainable Energy Reviews, Vol.15 (No.8). pp. 3813-3832. doi:10.1016/j.rser.2011.07.019

Zhao, X., Gouder, K., Graham, J. M. R. and Limebeer, D. J. N. (2016) Buffet loading, dynamic response and aerodynamic control of a suspension bridge in a turbulent wind. Journal of Fluids and Structures, 62 . pp. 384-412. doi:10.1016/j.jfluidstructs.2016.01.013

Zhu, Xinyao, Siamantouras, Eleftherios, Liu, Kuo-Kang and Liu, Xianping (2016) Determination of work of adhesion of biological cell under AFM bead indentation. Journal of the Mechanical Behavior of Biomedical Materials, 56 . pp. 77-86. doi:10.1016/j.jmbbm.2015.11.034

Zhu, Xinyao, Wang, Zuobin and Liu, Xianping (2017) Investigation of effect of fullerenol on viscoelasticity properties of human hepatocellular carcinoma by AFM-Based creep tests. Journal of Materials Research, 32 (13). pp. 2521-2531. doi:10.1557/jmr.2017.229