Items where Subject is "T Technology > TJ Mechanical engineering and machinery"
|Up a level|
Number of items at this level: 103.
Abdullah, Abu (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.
Alkan, Bugra, Vera, Daniel, Ahmad, Mussawar, Ahmad, Bilal and Harrison, Robert (2016) Design evaluation of automated manufacturing processes based on complexity of control logic. In: 26th CIRP Design Conference, Stockholm, Sweden, 15-17 Jun 2016. Published in: Procedia CIRP (In Press)
Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.
Bai, Pujun, Mei, Jiangping, Huang, Tian and Chetwynd, D. G.. (2015) Kinematic calibration of Delta robot using distance measurements. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 230 (3). pp. 414-424. ISSN 0954-4062
Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.
Beynon, Meurig, Harfield, Antony and Chang, S. (2005) Alternative model-building for the study of socially interactive robots. In: AISB 2005 Symposium on Robot Companions Hard Problems and Open Challenges in Human-Robot Interaction, Hatfield, UK, 12-15 Apr 2005
Beynon, Meurig, Harfield, Antony and Jormanainen, I. (2006) Varieties of concretisation : an illustrative example. In: 5th Annual Finnish/Baltic Sea Conference on Computer Science Education (Koli Calling 2005), Koli National Park, Finland, 17-20 Nov 2005. Published in: Koli Calling 2005 - Proceedings of the Fifth Koli Calling Conference on Computer Science Education pp. 153-156.
Bhudwannachai, Pipat (2014) Performance evaluation and analysis of the use of CO2 cooling for conventional drilling of carbon fibre reinforced plastics. PhD thesis, University of Warwick.
Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.
Cai, Yong and Mias, Christos. (2009) Faster 3D finite element time domain : Floquet absorbing boundary condition modelling using recursive convolution and vector fitting. IET Microwaves Antennas & Propagation, Vol.3 (No.2). pp. 310-324. ISSN 1751-8725
Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.
Chen, Ching-Hsien (2013) Tools for developing continuous-flow micro-mixer : numerical simulation of transitional flow in micro geometries and a quantitative technique for extracting dynamic information from micro-bubble images. PhD thesis, University of Warwick.
Chen, Ting (Researcher in engineering) (2014) First step of verification of Li's hypothesis : identification of a new vortex structure induced by guide-plate in Three Gorges turbines. PhD thesis, University of Warwick.
Chen, Yangzhi, Liu, X., Chetwynd, D. G. and Huang, P.. (2008) Investigation of a novel elastic-mechanical wheel transmission under light duty conditions. Mechanism and Machine Theory, Vol.43 (No.11). pp. 1462-1477. ISSN 0094-114X
Christou, George and Mias, Christos. (2011) Critique of optical negative refraction superlensing. Plasmonics, Vol.6 (No.2). pp. 307-309. ISSN 1557-1955
Clark, Leon, Shirinzadeh, Bijan, Tian, Yanling and Oetomo, Denny. (2015) Laser-based sensing, measurement, and misalignment control of coupled Linear and angular motion for ultrahigh precision movement. IEEE/ASME Transactions on Mechatronics, 20 (1). pp. 84-92. ISSN 1083-4435
Cooper, D. E., Gibbons, Gregory John, Stanford, Mark and Kibble, Kevin A. (2009) E-Manufacturing for product improvement at Red Bull technology. In: 7th International Conference on Manufacturing Research (ICMR' 09), University of Warwick, UK, 8-10 Sep 2009
Critoph, Robert E., Metcalf, Steven John and Tamainot-Telto, Zacharie. (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. ISSN 0145-7632
Dahlmann, Frederik and Veal, Gareth. (2016) The role of umbrella agreements in achieving sustainability goals : energy efficiency at the Empire State building. Journal of Green Building, 11 (1). pp. 71-94. ISSN 1552-6100
Dang, H. V. and Živanović, Stana (2016) Dataset supporting: 'Influence of low-frequency vertical vibration on walking locomotion'. [Dataset]
Docherty, Stephanie Y., Nicholls, William D., Borg, Matthew K., Lockerby, Duncan A. and Reese, Jason M.. (2014) Boundary conditions for molecular dynamics simulations of water transport through nanotubes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Volume 228 (Number 1). pp. 186-195. ISSN 0954-4062
Evans, T. S., Quarini, Giuseppe Leonardo and Shire, G. S. F.. (2008) Investigation into the transportation and melting of thick ice slurries in pipes. International Journal of Refrigeration, Vol.31 (No.1). pp. 145-151. ISSN 0140-7007
Evernden, M. C. and Mottram, J. Toby. (2011) Closed-form equations for flange force and maximum deflection of box-beams of fiber reinforced polymer with partial shear interaction between webs and flanges. Advances in Structural Engineering: an international journal, 14 (6). pp. 991-1004. ISSN 1369-4332
Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.
Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.
Fowell, Barry George (1983) In-process control of grinding. PhD thesis, University of Warwick.
Garvey, S. D., Eames, P. C., Wang, J. H., Pimm, A. J., Waterson, M., MacKay, R. S. (Robert Sinclair), Giulietti, M., Flatley, L. C., Thomson, M., Barton, J., Evans, D. J. (David J.), Busby, J. and Garvey, J. E.. (2015) On generation-integrated energy storage. Energy Policy, 86 . pp. 544-551. ISSN 0301-4215
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Low-cost resin infusion mould tooling for carbon fibre composites manufacture. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 511-518. ISSN 0954-4100
Gibbons, Gregory John, Segui-Garza, Juan Jose and Hansell, Robert George. (2010) Variable cavity volume tooling for high-performance resin infusion moulding. Institution of Mechanical Engineers. Proceedings. Part G: Journal of Aerospace Engineering, Vol.224 (No.4). pp. 499-509. ISSN 0954-4100
Glover, Peter Benedict Myers (1994) Computer simulation and analysis methods in the development of the hydraulic ram pump. PhD thesis, University of Warwick.
Gongora, Mario Augusto (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.
Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622.
Hamilton, Ross (1997) Continuous path : the evolution of process control technologies in post-war Britain. PhD thesis, University of Warwick.
Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, M.. (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. ISSN 0924-0136
Han, Li, Thornton, Martin and Shergold, M.. (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. ISSN 0264-1275
Harris, Joseph H. (2013) Stability of the flow over a rough, rotating disk. PhD thesis, University of Warwick.
Hazra, S. (Sumit), Roya, R., Williams, D., Aylmoreb, R. and Hollingdale, D. (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, Volume 213 . pp. 2049-2063. ISSN 0924-0136
Henshall, Paul, Eames, Philip C., Arya, Farid, Hyde, Trevor, Moss, Roger and Shire, G.S.F.. (2016) Constant temperature induced stresses in evacuated enclosures for high performance flat plate solar thermal collectors. Solar Energy, 127 . pp. 250-261. ISSN 0038-092X
Holland, David M., Borg, Matthew K., Lockerby, Duncan A. and Reese, Jason M.. (2015) Enhancing nano-scale computational fluid dynamics with molecular pre-simulations : unsteady problems and design optimisation. Computers & Fluids, Volume 115 . pp. 46-53. ISSN 0045-7930
Huang, Tian, Liu, H. T. and Chetwynd, D. G.. (2011) Generalized Jacobian analysis of lower mobility manipulators. Mechanism and Machine Theory, Vol.46 (No.6). pp. 831-844. ISSN 0094-114X
Huang, Tian, Liu, Songtao, Mei, Jiangping and Chetwynd, D. G.. (2013) Optimal design of a 2-DOF pick-and-place parallel robot using dynamic performance indices and angular constraints. Mechanism and Machine Theory, Volume 70 . pp. 246-253. ISSN 0094-114X
Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.
Jing, Xiubing, Li, Huaizhong, Wang, Jun and Tian, Yanling. (2014) Modelling the cutting forces in micro-end-milling using a hybrid approach. The International Journal of Advanced Manufacturing Technology, 73 (9-12). pp. 1647-1656. ISSN 0268-3768
Jung, Seo Yoon and Chung, Yongmann M.. (2012) Large-eddy simulation of accelerated turbulent flow in a circular pipe. International Journal of Heat and Fluid Flow, Volume 33 (Number 1). pp. 1-8. ISSN 0142727X
Karavasilis, Theodore L., Makris, Nicos, Bazeos, Nikitas and Beskos, D. E.. (2010) Dimensional response analysis of multistorey regular steel MRF subjected to pulselike earthquake ground motions. Journal of Structural Engineering, Vol.136 (No.8). pp. 921-932. ISSN 0733-9445
Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.
Khovanova, N. A. and Khovanov, I. A.. (2011) The role of excitations statistic and nonlinearity in energy harvesting from random impulsive excitations. Applied Physics Letters, Vol.99 (No.14). Article: 144101144101. ISSN 0003-6951
Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.
Kourra, Nadia, Warnett, Jason, Attridge, Alex, Dahnel, Aishah Najiah, Ascroft, Helen, Barnes, Stuart and Williams, M. A. (Mark A.). (2016) A metrological inspection method using micro-CT for the analysis of drilled holes in CFRP and titanium stacks. International Journal of Advanced Manufacturing Technology . pp. 1-11. ISSN 0268-3768 (In Press)
Kreikemeyer-Lorenzo, D., Unterberger, W. (Werner), Blume, R., Hävecker, M., Rocha, T. C. R., Knop-Gericke, A., Schlögl, R., Lerotholi, T. J., Duncan, David A. and Woodruff, D. P.. (2013) Quantitative adsorbate structure determination under catalytic reaction conditions. Physical Review B (Condensed Matter and Materials Physics), Volume 87 (Number 12). 125420 . ISSN 1098-0121
Lewis, W. J., Brew, J. S., Bryanston-Cross, P. and Nawasra, J. S.. (2011) Form-finding as a modelling tool for shaping mechanical components: a feasibility case study of an axial-flow compressor blade. Engineering Structures, Vol.33 (No.9). pp. 2612-2620. ISSN 0141-0296
Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.
Lillington, Richard (2013) Fuel system characterization : an investigation into the effects associated with the manufacturing and testing of precision fuel system components. PhD thesis, University of Warwick.
Liu, Fei, Giulietti, Monica and Chen, Bo, Dr.. (2016) Joint optimization of generation and storage in the presence of wind. IET Renewable Power Generation . ISSN 1752-1424 (In Press)
Liu, H., Huang, Tian and Chetwynd, D. G.. (2011) A method to formulate a dimensionally homogeneous Jacobian of parallel manipulators. IEEE Transactions on Robotics, Vol.27 (No.1). pp. 150-156. ISSN 1552-3098
Liu, Hao (2015) Energy saving through voltage optimisation & non-intrusive load monitoring in domestic house. PhD thesis, University of Warwick.
Liu, Huaiju (2013) Lubricated contact analysis of a spur gear pair with dynamic loads. PhD thesis, University of Warwick.
Liu, Kuo-Kang, Wu, Ren-Guei, Chuang, Yun-Ju, Khoo, Hwa Seng, Huang, Shih-Hao and Tseng, Fan-Gang (2010) Microfluidic systems for biosensing. Sensors, Vol.10 (No.7). pp. 6623-6661. ISSN 1424-8220
Liu, X., Yue, Zhaoyang, Cai, Z., Chetwynd, D. G. and Smith, S. T.. (2008) Quantifying touch-feel perception : tribological aspects. Measurement Science and Technology, Vol.19 (No.8). Article: 084007. ISSN 0957-0233
Luo, Xing, Wang, Jihong, Dooner, Mark, Clarke, Jonathan and Krupke, Christopher (2014) Overview of current development in compressed air energy storage technology. Energy Procedia, Volume 62 . pp. 603-611. ISSN 1876-6102
Ma, Yue, Niu, Wentie, Luo, Zhenjun, Yin, Fuwen and Huang, Tian. (2016) Static and dynamic performance evaluation of a 3-DOF spindle head using CAD–CAE integration methodology. Robotics and Computer-Integrated Manufacturing, 41 . pp. 1-12. ISSN 0736-5845
MacDonald, M. G. and Živanović, Stana (2016) Dataset supporting: 'Measuring ground reaction force and quantifying variability in jumping and bobbing actions'. [Dataset]
Malard, B., Pilch, J., Sittner, P., Davydov, V. (Vadim), Sedlák, P., Konstantinidis, K. and Hughes, Darren J.. (2012) Internal stresses in steel plate generated by shape memory alloy inserts. Acta Materialia, Vol.60 (No.3). pp. 1378-1394. ISSN 1359-6454
Metcalf, Steven John (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.
Mottram, J. Toby. (2010) Prediction of net-tension strength for multirow bolted connections of pultruded material using the Hart-Smith semi-empirical modeling approach. Journal of Composites for Construction, 14 (1). pp. 105-114. ISSN 1090-0268
Murthy, Keshaviah Krishna (1967) Some studies in optimum and self-adaptive control systems. PhD thesis, University of Warwick.
Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.
Oswald, Andrew J. , Oswald, James I. and Ashraf-Ball, Hezlin (2009) Hydrogen transport and the spatial requirements of renewable energy. Working Paper. Coventry: University of Warwick, Department of Economics. Warwick economic research papers (No.903).
Revell, Philip Scott (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.
Robertson, James Ritchie (1971) A new transfer function analyser. PhD thesis, University of Warwick.
Shah, Raja Mazuir Bin Raja Ahsan, McGordon, Andrew, Amor-Segan, Mark and Jennings, P. A. (Paul A.) (2013) Micro gas turbine range extender : validation techniques for automotive applications. In: 4th Hybrid Electric Vehicle Conference (HEVC 2013), London, United Kingdom, 6-7 Nov 2013. Published in: HEVC 2013 : 4th Hybrid and Electric Vehicles Conference.
Shire, G. S. F., Quarini, Giuseppe Leonardo and Evans, T. S.. (2009) Pressure drop of flowing ice slurries in industrial heat exchangers. Applied Thermal Engineering, Vol.29 (No.8-9). pp. 1500-1506. ISSN 1359-4311
Shire, G. S. F., Quarini, Giuseppe Leonardo, Rhys, T. D. L. and Evans, T. S.. (2008) The anomalous pressure drop behaviour of ice slurries flowing through constrictions. International Journal of Multiphase Flow, Vol.34 (No.5). pp. 510-515. ISSN 0301-9322
Siamantouras, Eleftherios, Hills, Claire E., Younis, Mustafa Y. G., Squires, Paul E. and Liu, Kuo-Kang. (2014) Quantitative investigation of calcimimetic R568 on beta cell adhesion and mechanics using AFM single-cell force spectroscopy. FEBS Letters, Volume 588 (Number 7). pp. 1173-1178. ISSN 0014-5793
Skeen, Andrew (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.
Smith, S. T. (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.
Tait, Edward W., Racliff, Laura E., Payne, Mike C., Haynes, Peter D. and Hine, Nicholas. (2016) Simulation of electron energy loss spectra of nanomaterials with linear-scaling density functional theory. Journal of Physics: Condensed Matter, 28 (19). ISSN 0953-8984
Tamainot-Telto, Zacharie. (2016) Novel method using Dubinin-Astakhov theory in sorption reactor design for refrigeration and heat pump applications. Applied Thermal Engineering . ISSN 1359-4311 (In Press)
Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E., Zhong, Y. and Thorpe, Roger. (2009) Carbon-ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping. International Journal of Refrigeration, Vol.32 (No.6). pp. 1212-1229. ISSN 0140-7007
Tandy, Michael J., Winkvist, Stefan and Young, Ken (2010) Competing in the RoboCup Rescue Robot League. In: Robotics for Risky Interventions and Surveillance of the Environment (RISE), Sheffield Hallam University, Sheffield, England, 20-21 January 2010. Published in: Proceedings of Robotics for Risky Interventions and Surveillance of the Environment, Vol.2010
Thamotheram, Craig P. (2012) Essays in robust control. PhD thesis, University of Warwick.
Thornby, John Albert, MacKay, R. S. and Williams, M. A.. (2015) Mathematical principles for the design of isostatic mount systems for dynamic structures. IMA Journal of Applied Mathematics, 80 (6). pp. 1837-1854. ISSN 0272-4960
Tian, Y. (Yuan) and Zhao, Chang-Ying (2009) Heat transfer analysis for phase change materials (PCMs). In: The 11th International Conference on Energy Storage (Effstock 2009), Stockholm, Sweden, Jul 14-17, 2009. Published in: Effstock Conference Proceedings 2009 (No.28).
Tian, Y. (Yuan) and Zhao, Chang-Ying (2009) Numerical investigations of heat transfer in phase change materials using non-equilibrium model. In: The Eleventh UK National Heat Transfer Conference, London, UK , 6-8 September 2009. Published in: Proceedings of 11th UK National Heat Transfer Conference
Tian, Y. (Yuan) and Zhao, Chang-Ying. (2013) A review of solar collectors and thermal energy storage in solar thermal applications. Applied Energy, Vol.104 . pp. 538-553. ISSN 0306-2619
Tian, Y. (Yuan), Zhao, Chang-Ying and Lapkin, Alexei (2012) Exergy optimisation for cascaded thermal storage. In: 12th International Conference on Energy Storage (InnoStock 2012), Lleida, Spain, 16-19 May 2012. Published in: Proceedings of the 12th International Conference on Energy Storage
Tian, Yanling, Liu, X., Zhang, D. and Chetwynd, D. G.. (2009) Dynamic modelling of the fidelity of random surface measurement by the stylus method. Wear, Vol.266 (No.5-6). pp. 555-559. ISSN 0043-1648
Tian, Yanling, Shirinzadeh, B., Zhang, D., Liu, X. and Chetwynd, D. G.. (2009) Design and forward kinematics of the compliant micro-manipulator with lever mechanisms. Precision Engineering, Vol.33 (No.4). pp. 466-475. ISSN 0141-6359
Walmsley, Nigel (1986) The numerical representation of pump-turbine performance characteristics. PhD thesis, University of Warwick.
Wang, L. W., Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E. and Wang, R. Z.. (2010) Anisotropic thermal conductivity and permeability of compacted expanded natural graphite. Applied Thermal Engineering, Vol.30 (No.13). pp. 1805-1811. ISSN 1359-4311
Wang, Yue (Researcher in engineering) (2016) Modelling and simulation study of IGCC power plant with activated carbon-based carbon capture process. PhD thesis, University of Warwick.
Wellings, Tom, Williams, M. A. (Mark A.) and Pitts, Matthew. (2008) Customer perception of switch-feel in luxury sports utility vehicles. Food Quality and Preference, Vol.19 (No.8). pp. 737-746. ISSN 0950-3293
Widanage, Widanalage Dhammika, Stoev, Julian, Mulders, Anne van, Schoukens, J. (Johan) and Pinte, Gregory. (2011) Nonlinear system-identification of the filling phase of a wet-clutch system. Control Engineering Practice, Volume 19 (Number 12). pp. 1506-1516. ISSN 0967-0661
Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.
Winkvist, Stefan (2013) Low computational SLAM for an autonomous indoor aerial inspection vehicle. PhD thesis, University of Warwick.
Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.
Zhang, Guan H. and Zhao, Chang-Ying. (2011) Thermal and rheological properties of microencapsulated phase change materials. Renewable Energy, Vol.36 (No.11). pp. 2959-2966. ISSN 0960-1481
Zhang, Guanhua, (Researcher in engineering) (2013) Fabrication, characterization and thermo-physical properties of micro- and nano- scaled phase change materials for thermal energy storage. PhD thesis, University of Warwick.
Zhang, H. L., Van Gerven, T., Baeyens, Jan and Degrève, J.. (2014) Photovoltaics : reviewing the European feed-in-tariffs and changing PV efficiencies and costs. The Scientific World Journal, Volume 2014 . Article number 404913. ISSN 1537-744X
Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.
Zhao, Chang-Ying, Lu, Wei and Tian, Y. (Yuan). (2010) Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs). Solar Energy, Vol.84 (No.8). pp. 1402-1412. ISSN 0038-092X
Zhao, Chang-Ying and Zhang, Guan H.. (2011) Review on microencapsulated phase change materials (MEPCMs) : fabrication, characterization and applications. Renewable and Sustainable Energy Reviews, Vol.15 (No.8). pp. 3813-3832. ISSN 13640321
Zhu, Xinyao, Siamantouras, Eleftherios, Liu, Kuo-Kang and Liu, Xianping. (2016) Determination of work of adhesion of biological cell under AFM bead indentation. Journal of the Mechanical Behavior of Biomedical Materials, 56 . pp. 77-86. ISSN 1751-6161