Journal Article

Arnold, Eduardo, Al-Jarrah, Omar Y., Dianati, Mehrdad, Fallah, Saber, Oxtoby, David and Mouzakitis, Alexandros (2019) A survey on 3D object detection methods for autonomous driving applications. IEEE Transactions on Intelligent Transportation Systems . pp. 1-14. doi:10.1109/TITS.2019.2892405 (In Press)

Barai, Anup, Tangirala, Ravichandra, Uddin, Kotub, Chevalier, Julie, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells. Journal of Energy Storage, 13 . pp. 211-219. doi:DOI:10.1016/j.est.2017.07.021

Barai, Anup, Uddin, Kotub, Dubarry, Matthieu, Somerville, Limhi, McGordon, Andrew, Jennings, P. A. (Paul A.) and Bloom, Ira (2019) A comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells. Progress in Energy and Combustion Science, 72 . pp. 1-31. doi:10.1016/j.pecs.2019.01.001

Barai, Anup, Widanage, Widanalage Dhammika, Marco, James, McGordon, Andrew and Jennings, P. A. (Paul A.) (2015) A study of the open circuit voltage characterization technique and hysteresis assessment of lithium-ion cells. Journal of Power Sources, Volume 295 . pp. 99-107. doi:10.1016/j.jpowsour.2015.06.140

Bastin, Matthew and Jones, R. Peter (2015) Development of a multibody systems model for investigation of the effects of hybrid electric vehicle powertrains on vehicle dynamics. International Journal of Online Engineering, 11 (6). pp. 33-37. doi:10.3991/ijoe.v11i6.5033

Bektas, Oguz, Alfudail, Amjad and Jones, Jeffrey Alun (2017) Reducing dimensionality of multi-regime data for failure prognostics. Journal of Failure Analysis and Prevention, 17 . pp. 1268-1275. doi:10.1007/s11668-017-0368-2

Bhattacharyya, Kumar (2015) Smarter–lighter–greener : research innovations for the automotive sector. Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences, 471 (2179). 20140938. doi:10.1098/rspa.2014.0938

Birrell, Stewart A. and Fowkes, Mark (2014) Glance behaviours when using an in-vehicle smart driving aid : a real-world, on-road driving study. Transportation Research Part F: Traffic Psychology and Behaviour, Volume 22 . pp. 113-125. doi:10.1016/j.trf.2013.11.003

Birrell, Stewart A., Fowkes, Mark and Jennings, P. A. (Paul A.) (2014) Effect of using an in-vehicle smart driving aid on real-world driver performance. IEEE Transactions on Intelligent Transportation Systems, Volume 15 (Number 4). pp. 1801-1810. doi:10.1109/TITS.2014.2328357

Birrell, Stewart A., Taylor, James. E., McGordon, Andrew, Son, Joonwoo and Jennings, Paul. A. (2014) Analysis of three independent real-world driving studies : a data driven and expert analysis approach to determining parameters affecting fuel economy. Transportation Research Part D: Transport and Environment , Volume 33 . pp. 74-86. doi:10.1016/j.trd.2014.08.021

Birrell, Stewart A., Wilson, Daniel, Yang, C. P., Dhadyalla, Gunwant and Jennings, P. A. (Paul A.) (2015) How driver behaviour and parking alignment affects inductive charging systems for electric vehicles. Transportation Research Part C : Emerging Technologies, 58 (Part D). pp. 721-731. doi:10.1016/j.trc.2015.04.011

Birrell, Stewart A. and Young, Mark S. (2011) The impact of smart driving aids on driving performance and driver distraction. Transportation Research Part F : Traffic Psychology and Behaviour, Vol.14 (No.6). pp. 484-493. doi:10.1016/j.trf.2011.08.004

Birrell, Stewart A., Young, Mark S., Jenkins, Daniel P. and Stanton, Neville A. (2012) Cognitive work analysis for safe and efficient driving. Theoretical Issues in Ergonomics Science, Vol.13 (No.4). pp. 430-449. doi:10.1080/1463922X.2010.539285

Birrell, Stewart A., Young, Mark S. and Weldon, Alex M. (2013) Vibrotactile pedals : provision of haptic feedback to support economical driving. Ergonomics, Vol.56 (No.2). pp. 282-292. doi:10.1080/00140139.2012.760750

Bruen, Thomas, Hooper, James Michael, Marco, James, Gama, Miguel and Chouchelamane, Gael (2016) Analysis of a battery management system (BMS) control strategy for vibration aged nickel manganese cobalt oxide (NMC) Lithium-Ion 18650 battery cells. Energies, 9 (4). pp. 1-20. doi:10.3390/en9040255

Bruen, Thomas and Marco, James (2016) Modelling and experimental evaluation of parallel connected lithium ion cells for an electric vehicle battery system. Journal of Power Sources, 310 . pp. 91-101. doi:10.1016/j.jpowsour.2016.01.001

Cao, Yue, Han, Chong, Zhang, Xu, Kaiwartya, Omprakash, Zhuang, Yuan, Aslam, Nauman and Dianati, Mehrdad (2018) A trajectory-driven opportunistic routing protocol for VCPS. IEEE Transactions on Aerospace and Electronic Systems . doi:10.1109/TAES.2018.2826201 (In Press)

Chater, Nick, Misyak, Jennifer B., Watson, Derrick G. , Griffiths, Nathan and Mouzakitis, Alexandros (2018) Negotiating the traffic : can cognitive science help make autonomous vehicles a reality? Trends in Cognitive Sciences, 22 (2). pp. 93-95. doi:10.1016/j.tics.2017.11.008

Chen, Yunfei, Feng, Wei and Zheng, G. (2018) Optimum placement of UAV as relays. IEEE Communications Letters, 22 (2). pp. 248-251. doi:10.1109/LCOMM.2017.2776215

Chong, J. J., Marco, James and Greenwood, David G. (2016) Modelling and simulations of a narrow track tilting vehicle. Exchanges: the Warwick Research Journal, 4 (1).

Chung, Yongmann M. and Talha, Tariq (2011) Effectiveness of active flow control for turbulent skin friction drag reduction. Physics of Fluids, Vol.23 (No.2). 025102. doi:10.1063/1.3553278

Colledani, Marcello, Bolognese, L., Ceglarek, Darek, Franchini, Fabio, Marine, C. and Mistry, A. (2015) Multi-objective early-stage design of automotive hybrid assembly lines. Procedia CIRP, Volume 28 . pp. 125-130. doi:10.1016/j.procir.2015.04.021

Cooper, A. J. and Peake, N. (2005) Upstream-radiated rotor–stator interaction noise in mean swirling flow. Journal of Fluid Mechanics, Vol.52 . pp. 219-250. doi:10.1017/S0022112004002010

Critoph, Robert E., Metcalf, Steven J. and Tamainot-Telto, Zacharie (2010) Proof of concept car adsorption air conditioning system using a compact sorption reactor. Heat Transfer Engineering, Vol.31 (No.11). pp. 950-956. doi:10.1080/01457631003604459

Das, Abhishek, Butterworth, Ian, Masters, Iain and Williams, David K. (2019) Evaluation of key geometrical and mechanical properties for remote laser welded AC-170PX aluminium joints. Journal of Laser Micro/Nanoengineering, 14 (1). doi:10.2961/jlmn.2019.01.0001

Das, Abhishek, Li, Dezhi, Williams, D. K. and Greenwood, David G. (2018) Joining technologies for automotive battery systems manufacturing. World Electric Vehicle Journal, 9 (2). 22. doi:10.3390/wevj9020022

Das, Abhishek, Li, Dezhi, Williams, David K. and Greenwood, David G. (2019) Weldability and shear strength feasibility study for automotive electric vehicle battery tab interconnects. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (1). 54. doi:10.1007/s40430-018-1542-5

Debattista, Kurt, Bashford-Rogers, Thomas, Harvey, Carlo, Waterfield, Brian and Chalmers, Alan (2018) Subjective evaluation of high-fidelity virtual environments for driving simulations. IEEE Transactions on Human-Machine Systems, 48 (1). pp. 30-40. doi:10.1109/THMS.2017.2762632

Dhara, S., Basak, S., Panda, S. K., Hazra, S. K. , Shollock, Barbara A. and Dashwood, R. J. (2016) Formability analysis of pre-strained AA5754-O sheet metal using Yld96 plasticity theory : role of amount and direction of uni-axial pre-strain. Journal of Manufacturing Processes, 24 . pp. 270-282. doi:10.1016/j.jmapro.2016.09.014

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L. and Corrochano, D. (2017) Powertrain modelling for engine stop-start dynamics and control of micro/mild hybrid construction machines. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 231 (3). pp. 439-456. doi:10.1177/1464419317709894

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L., Corrochano, D. G. and Yoon, J. I. (2018) Challenges of micro/mild hybridisation for construction machinery and applicability in UK. Renewable and Sustainable Energy Reviews , 91 . pp. 301-320. doi:10.1016/j.rser.2018.03.027

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part A : fundamental concepts and design. Energies, 10 (7). 962. doi:10.3390/en10070962

Dinh, Quang Truong, Marco, James, Niu, Hui, Greenwood, David G., Harper, Lee and Corrochano, David (2017) A novel method for idle-stop-start control of micro hybrid construction equipment—Part B : a real-time comparative study. Energies, 10 (9). 1250. doi:10.3390/en10091250

Ferrari, Stefania, Loveridge, Melanie, Beattie, Shane D., Jahn, Marcus, Dashwood, R. J. and Bhagat, Rohit (2015) Latest advances in the manufacturing of 3D rechargeable lithium microbatteries. Journal of Power Sources, Volume 286 . pp. 25-46. doi:10.1016/j.jpowsour.2015.03.133

Gaylard, A. P., Kabanovs, A., Jilesen, J., Kirwan, Kerry and Lockerby, Duncan A. (2017) Simulation of rear surface contamination for a simple bluff body. Journal of Wind Engineering and Industrial Aerodynamics, 165 . pp. 13-22. doi:10.1016/j.jweia.2017.02.019

Gaylard, A. P., Kirwan, Kerry and Lockerby, Duncan A. (2017) Surface contamination of cars : a review. Institution of Mechanical Engineers. Proceedings. Part D: Journal of Automobile Engineering, 231 (9). pp. 1160-1176. doi:10.1177/0954407017695141

Ge, Yangyang, Zhao, Shuo, Ma, Liang, Yan , Tao, Li, Zushu and Yang , Bin (2019) Inclusions control and refining slag optimization for fork flat steel. Metals, 9 (2). 253. doi:10.3390/met9020253

Geitner, Claudia, Birrell, Stewart A., Krehl, Claudia and Jennings, P. A. (Paul A.) (2018) Haptic foot pedal : influence of shoe type, age, and gender on subjective pulse perception. Human Factors, 60 (4). pp. 496-509. doi:10.1177/0018720818771906

Grandjean, Thomas R. B., Groenewald, Jakobus and Marco, James (2019) The experimental evaluation of lithium ion batteries after flash cryogenic freezing. Journal of Energy Storage, 21 . pp. 202-215. doi:10.1016/j.est.2018.11.027

Grandjean, Thomas R. B., Groenewald, Jakobus, McGordon, Andrew, Widanage, Widanalage Dhammika and Marco, James (2018) Accelerated internal resistance measurements of lithium-ion cells to support future end-of-life strategies for electric vehicles. Batteries, 4 (4). 49. doi:10.3390/batteries4040049

Groenewald, J., Grandjean, Thomas R. B. and Marco, James (2017) Accelerated energy capacity measurement of lithium-ion cells to support future circular economy strategies for electric vehicles. Renewable and Sustainable Energy Reviews, 69 . pp. 98-111.

Han, Li, Thornton, Martin, Boomer, Douglas and Shergold, Mike (2010) Effect of aluminium sheet surface conditions on feasibility and quality of resistance spot welding. Journal of Materials Processing Technology, Vol.210 (No.8). pp. 1076-1082. doi:10.1016/j.jmatprotec.2010.02.019

Han, Li, Thornton, Martin and Shergold, Mike (2010) A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Materials & Design, Vol.31 (No.3). pp. 1457-1467. doi:10.1016/j.matdes.2009.08.031

Hartwell, Ian and Marco, James (2016) Management of intellectual property uncertainty in a remanufacturing strategy for automotive energy storage systems. Journal of Remanufacturing, 6 (1). doi:10.1186/s13243-016-0025-z

Hawley, Carol, Galbraith, N. D. and Souza, V. A. de (2008) Medical education on fitness to drive : a survey of all UK medical schools. Postgraduate Medical Journal, Vol.84 (No.998). pp. 635-638. doi:10.1136/pgmj.2008.067959

Higgins, Matthew D., Green, Roger and Leeson, Mark S. (2012) Optical wireless for intravehicle communications : a channel viability analysis. IEEE Transactions on Vehicular Technology, Vol.61 (No.1). pp. 123-129. doi:10.1109/TVT.2011.2176764

Higgins, Matthew D., Green, Roger and Leeson, Mark S. (2013) Optical wireless for intravehicle communications : incorporating passenger presence scenarios. IEEE Transactions on Vehicular Technology, Volume 62 (Number 8). pp. 3510-3517. doi:10.1109/TVT.2013.2263290

Hooper, James Michael and Marco, James (2015) Experimental modal analysis of lithium-ion pouch cells. Journal of Power Sources, Volume 286 . pp. 247-259. doi:10.1016/j.jpowsour.2015.03.098

Hooper, James Michael, Marco, James, Chouchelamane, Gael H. and Lyness, Christopher (2016) Vibration durability testing of nickel manganese cobalt oxide (NMC) lithium-Ion 18,650 battery cells. Energies, 9 (1). p. 52. doi:10.3390/en9010052

Hooper, James Michael, Marco, James, Chouchelamane, Gael Henri, Chevalier, Julie Sylvie and Williams, Darren (2018) Multi-axis vibration durability testing of lithium ion 18650 NCA cylindrical cells. Journal of Energy Storage, 15 . pp. 103-123. doi:10.1016/j.est.2017.11.006

Hooper, James Michael, Marco, James, Chouchelamane, Gael Henri, Lyness, Christopher and Taylor, James (2016) Vibration durability testing of Nickel Cobalt Aluminum Oxide (NCA) lithium-ion 18650 battery cells. Energies, 9 (4). 281. doi:10.3390/en9040281

Ibarra-Arenado, Manuel, Tjahjadi, Tardi, Pérez-Oria, Juan, Robla-Gómez, Sandra and Jiménez-Avello, Agustín (2017) Shadow-based vehicle detection in urban traffic. Sensors, 17 (5). 975. doi:10.3390/s17050975

Ivanov, Nikola, Jovanović, Radosav, Fichert, Frank, Strauss, Arne, Starita, Stefano, Babić, Obrad and Pavlović, Goran (2019) Coordinated capacity and demand management in a redesigned air traffic management value-chain. Journal of Air Transport Management, 75 . pp. 139-152. doi:10.1016/j.jairtraman.2018.12.007

Jahdi, Saeed, Alatise, Olayiwola M., Fisher, Craig A., Ran, Li and Mawby, P. A. (Philip A.) (2014) An evaluation of silicon carbide unipolar technologies for electric vehicle drive-trains. IEEE Journal of Emerging and Selected Topics in Power Electronics, Volume 2 (Number 3). pp. 517-528. doi:10.1109/JESTPE.2014.2307492

Jasinski, Dominik, Cinelli, Marco, Dias, Luis, Meredith, James O. and Kirwan, Kerry (2018) Assessing supply risks for non-fossil mineral resources via multi-criteria decision analysis. Resources Policy . doi:https://doi.org/10.1016/j.resourpol.2018.04.011 (In Press)

Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2016) A comprehensive framework for automotive sustainability assessment. Journal of Cleaner Production, 135 . pp. 1034-1044. doi:10.1016/j.jclepro.2016.07.027

Jasinski, Dominik, Meredith, James O. and Kirwan, Kerry (2015) A comprehensive review of full cost accounting methods and their applicability to the automotive industry. Journal of cleaner production, 108 (Part A). pp. 1123-1139. doi:10.1016/j.jclepro.2015.06.040

Jennings, P. A. (Paul A.) and Cain, Rebecca (2013) A framework for improving urban soundscapes. Applied Acoustics, Volume 74 (Number 2). pp. 293-299. doi:10.1016/j.apacoust.2011.12.003

Jiang, R., Bull, D. J., Proprentner, Daniela, Shollock, Barbara A. and Reed, P. A. S. (2017) Effects of oxygen-related damage on dwell-fatigue crack propagation in a P/M Ni-based superalloy : from 2D to 3D assessment. International Journal of Fatigue, 99 (Part 1). doi:10.1016/j.ijfatigue.2017.03.003

Kampert, Erik, Jennings, P. A. and Higgins, Matthew D. (2018) Investigating the V2V millimeter-wave channel near a vehicular headlight in an engine bay. IEEE Communications Letters . doi:10.1109/LCOMM.2018.2829181 (In Press)

Kaniappan Chinnathai, Malarvizhi, Günther, Till, Ahmad, Mussawar, Stocker, Cosima, Richter, Lukas, Schreiner, David, Vera, Daniel A., Reinhart, Gunther and Harrison, Robert (2017) An application of physical flexibility and software reconfigurability for the automation of battery module assembly. Procedia CIRP, 63 . pp. 604-609. doi:10.1016/j.procir.2017.03.128

Kellner, Quirin, Hosseinzadeh, Elham, Chouchelamane, Gael, Widanage, Widanalage Dhammika and Marco, James (2018) Battery cycle life test development for high-performance electric vehicle applications. Journal of Energy Storage, 15 . pp. 228-244. doi:10.1016/j.est.2017.11.019

Kellner, Quirin, Worwood, Daniel, Barai, Anup, Widanage, Widanalage Dhammika and Marco, James (2018) Duty-cycle characterisation of large-format automotive lithium ion pouch cells for high performance vehicle applications. Journal of Energy Storage, 19 . pp. 170-184. doi:10.1016/j.est.2018.07.018

Khan, Tawhid, Williams, M. A. (Mark A.) and Pitts, Matthew J. (2016) Cross-cultural differences in automotive HMI design : a comparative study between UK and Indian users’ design preferences. Journal of Usability Studies, 11 (2). pp. 45-65.

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, Paul. A. (2018) Calibrating trust through knowledge : introducing the concept of informed safety for automation in vehicles. Transportation Research Part C: Emerging Technologies, 96 . pp. 290-303. doi:10.1016/j.trc.2018.07.001

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant, Sivencrona, Håkan and Jennings, P. A. (Paul A.) (2017) Towards increased reliability by objectification of Hazard Analysis and Risk Assessment (HARA) of automated automotive systems. Safety Science, 99 (Part B). pp. 166-177. doi:10.1016/j.ssci.2017.03.024

Kiraci, Ercihan, Turley, Glen A., Attridge, Alex, Olifent, Alan and Williams, M. A. (Mark A.) (2016) Evaluating the capability of laser scanning to measure an automotive artefact : a comparison study of touch trigger probe and laser-scanning. International Journal of Productivity and Quality Management, 18 (4). pp. 440-455. doi:10.1504/IJPQM.2016.077776

Li, Dezhi, Han, Li, Thornton, Martin and Shergold, Mike (2012) Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints. Materials Science and Engineering: A, Vol.558 . pp. 242-252. doi:10.1016/j.msea.2012.07.119

Li, Muzi, Coakley, James, Isheim, Dieter, Tian, Gaofeng and Shollock, Barbara A. (2018) Influence of the initial cooling rate from γ′ supersolvus temperatures on microstructure and phase compositions in a nickel superalloy. Journal of Alloys and Compounds, 732 . pp. 765-776. doi:10.1016/j.jallcom.2017.10.263

Liu, Kailong, Li, Kang, Yang, Zhile, Zhang, Cheng and Deng, Jing (2017) An advanced Lithium-ion battery optimal charging strategy based on a coupled thermoelectric model. Electrochimica Acta, 225 . pp. 330-344. doi:10.1016/j.electacta.2016.12.129

Liu, Kailong, Li, Kang and Zhang, Cheng (2017) Constrained generalized predictive control of battery charging process based on a coupled thermoelectric model. Journal of Power Sources, 347 . pp. 145-158. doi:10.1016/j.jpowsour.2017.02.039

Loveridge, Melanie, Lain, Michael J., Huang, Qianye, Wan, Chaoying, Roberts, Alexander J. , Pappas, George S. and Bhagat, Rohit (2016) Enhancing cycling durability of Li-ion batteries with hierarchical structured silicon–graphene hybrid anodes. Physical Chemistry Chemical Physics, 18 . pp. 30677-30685. doi:10.1039/C6CP06788C

Luo, Xing, Wang, Jihong, Krupke, Christopher and Xu, Hongming (2016) Feasibility study of a scroll expander for recycling low-pressure exhaust gas energy from a vehicle gasoline engine system. Energies, 9 (4). pp. 1-22. 231. doi:10.3390/en9040231

Lyras, Konstantinos G., Dembele, Siaka and Wen, Jennifer X. (2019) Numerical simulation of flashing jets atomisation using a unified approach. International Journal of Multiphase Flow, 113 . pp. 45-58. doi:10.1016/j.ijmultiphaseflow.2018.12.011

Ma, He, Xu, Hongming, Wang, Jihong, Schnier, Thorsten, Neaves, Ben, Tan, Cheng and Wang, Zhi (2015) Model-based intelligence multi-objective globally optimization for HCCI engines. IEEE Transactions on Vehicular Technology, 64 (9). pp. 4326-4331. doi:10.1109/TVT.2014.2362954

Ma, He, Xu, Hongming, Wang, Jihong, Schnier, Thorsten, Neaves, Ben, Tan, Cheng and Wang, Zhi (2014) Model-based multiobjective evolutionary algorithm optimization for HCCI engines. IEEE Transactions on Vehicular Technology, 64 (9). pp. 4326-4331. doi:10.1109/TVT.2014.2362954

Masson, Vianney , Mathews, James , Moreau, Stéphane, Posson , Hélène and Brambley, Edward J. (James) (2018) The impedance boundary condition for acoustics in swirling ducted flow. Journal of Fluid Mechanics, 849 . pp. 645-675. doi:10.1017/jfm.2018.429

Morton, Craig, Anable, Jillian, Yeboah, Godwin and Cottrill, Caitlin (2018) The spatial pattern of demand in the early market for electric vehicles : evidence from the United Kingdom. Journal of Transport Geography, 72 . pp. 119-130. doi:10.1016/j.jtrangeo.2018.08.020

Mundhenk, Philipp, Paverd, Andrew, Mrowca, Artur, Steinhorst, Sebastian, Lukasiewycz, Martin, Fahmy, Suhaib A. and Chakraborty, Samarjit (2017) Security in automotive networks : lightweight authentication and authorization. ACM Transactions on Design Automation of Electronic Systems, 22 (2). 25. doi:10.1145/2960407

Nicolaides, Doros, McMahon, Richard A., Cebon, David and Miles, John (2018) A national power infrastructure for charge-on-the-move : an appraisal for Great Britain. IEEE Systems Journal . doi:10.1109/JSYST.2018.2792939 (In Press)

Ozpolat, Mumin, Kampert, Erik, Jennings, P. A. (Paul A.) and Higgins, Matthew D. (2018) A grid-based coverage analysis of urban mmWave vehicular ad hoc networks. IEEE Communications Letters . doi:10.1109/LCOMM.2018.2846562 (In Press)

Pastor-Fernandez, Carlos, Bruen, Thomas, Widanage, Widanalage Dhammika, Gama-Valdez, Miguel-Angel and Marco, James (2016) A study of cell-to-cell interactions and degradation in parallel strings : implications for the battery management system. Journal of Power Sources, 329 . pp. 574-585. doi:10.1016/j.jpowsour.2016.07.121

Pastor-Fernandez, Carlos, Uddin, Kotub, Chouchelamane, G. H., Widanage, Widanalage Dhammika and Marco, James (2017) A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as Li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems. Journal of Power Sources, 360 . pp. 301-318. doi:10.1016/j.jpowsour.2017.03.042

Pearson, Ian T. and Mottram, J. Toby (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 1, Evaluation of key parameters. Computers & Structures, 90-91 . pp. 76-88. doi:10.1016/j.compstruc.2011.10.005

Pearson, Ian T. and Mottram, J. Toby (2012) A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints. Part 2, Novel shell mesh to minimise analysis time. Computers & Structures, 90-91 . pp. 89-96. doi:10.1016/j.compstruc.2011.10.006

Pitts, Matthew J., Skrypchuk, Lee, Wellings, Tom, Attridge, Alex and Williams, M. A. (Mark A.) (2012) Evaluating user response to in-car haptic feedback touchscreens using the Lane Change Test. Advances in Human-Computer Interaction, 2012 . Article number 598739. doi:10.1155/2012/598739

Qi, Pengyuan, Zhao, Xiaowei and Palacios, Rafael (2019) Autonomous landing control of highly flexible aircraft based on Lidar preview in the presence of wind turbulence. IEEE Transactions on Aerospace and Electronic Systems . p. 1. doi:10.1109/TAES.2019.2892639

Qi, Pengyuan, Zhao, Xiaowei, Wang, Yinan, Palacios, Rafael and Wynn, Andrew (2018) Aeroelastic and trajectory control of high altitude long endurance aircraft. IEEE Transactions on Aerospace and Electronic Systems . doi:10.1109/TAES.2018.2836598 (In Press)

Qiu, Song, Guo, Weisi, Li, Bin, Wu, Yue, Chu, Xiaoli, Wang, Siyi and Dong, Yin (2015) Long range and duration underwater localization using molecular messaging. IEEE Transactions on Molecular, Biological and Multiscale Communications, 1 (4). pp. 363-370.

Rajan, Ashwin T., Barai, Anup, Uddin, Kotub, Somerville, Limhi, McGordon, Andrew and Marco, James (2018) Prediction of battery storage ageing and solid electrolyte interphase property estimation using an electrochemical model. Journal of Power Sources, 385 . pp. 141-147. doi:10.1016/j.jpowsour.2018.03.010

Ren, Yaxing, Truong, Dinh Quang, Marco, James and Greenwood, David G. (2019) Torque vectoring based drive assistance system for turning an electric narrow tilting vehicle. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 13 (1). pp. 1-13. doi:10.1177/0959651818823589

Rodrigues, Maradona, McGordon, Andrew, Gest, Graham and Marco, James (2018) Autonomous navigation in interaction-based environments - a case of non-signalised roundabouts. IEEE Transactions on Intelligent Vehicles, 3 (4). pp. 425-438. doi:10.1109/TIV.2018.2873916

Saldi, Z. S. and Wen, Jennifer X. (2017) Modeling thermal response of polymer composite hydrogen cylinders subjected to external fires. International Journal of Hydrogen Energy, 42 (11). pp. 7513-7520. doi:10.1016/j.ijhydene.2016.06.108

Shankar, R. (Ravi), Marco, James and Assadian, Francis (2012) The novel application of optimization and charge blended energy management control for component downsizing within a plug-in hybrid electric vehicle. Energies, Vol.5 (No.12). pp. 4892-4923. doi:10.3390/en5124892

Shojaei, Sina, McGordon, Andrew, Robinson, Simon and Marco, James (2017) Improving the performance attributes of plug-in hybrid electric vehicles in hot climates through key-off battery cooling. Energies, 10 (12). 2058. doi:10.3390/en10122058

Shojaei, Sina, McGordon, Andrew, Robinson, Simon, Marco, James and Jennings, P. A. (Paul A.) (2017) Developing a model for analysis of the cooling loads of a hybrid electric vehicle by using co-simulations of verified submodels. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering . pp. 1-19. doi:10.1177/0954407017707099

Shreejith, Shanker and Fahmy, Suhaib A. (2015) Extensible FlexRay communication controller for FPGA-based automotive systems. IEEE Transactions on Vehicular Technology, 64 (2). pp. 453-465.

Shreejith, Shanker and Fahmy, Suhaib A. (2018) Smart network interfaces for advanced automotive applications. IEEE Micro, 38 (2). pp. 72-80. doi:10.1109/MM.2018.022071137

Shreejith, Shanker, Mathew, Libin K., Vinod, A. P. and Fahmy, Suhaib A. (2018) Efficient spectrum sensing for aeronautical LDACS using low-power correlators. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 26 (6). doi:10.1109/TVLSI.2018.2806624

Shreejith, Shanker, Mundhenk, Philipp, Ettner, Andreas, Fahmy, Suhaib A., Steinhorst, Sebastian, Lukasiewycz, Martin and Chakraborty, Samarjit (2017) VEGa : a high performance vehicular Ethernet gateway on hybrid FPGA. IEEE Transactions on Computers, 66 (10). pp. 1790-1803. doi:10.1109/TC.2017.2700277

Somerville, Limhi, Barenoa, J., Trask, S., Jennings, P. A. (Paul A.), McGordon, Andrew, Lyness, C. and Bloom, I. (2016) The effect of charging rate on the graphite electrode of commercial lithium-ion cells : a post-mortem study. Journal of Power Sources, 335 . pp. 189-196.

Sookhak, Mehdi, Yu, Richard, He, Ying, Talebian, Hamid, Sohrabi Safa, Nader , Zhao, Nan, Khan, Muhammad Khurram and Kumar, Neeraj (2017) Fog vehicular computing : augmentation of fog computing using vehicular cloud computing. IEEE Vehicular Technology Magazine . p. 1. doi:10.1109/MVT.2017.2667499 (In Press)

Terrier, Douglas, Heracleous, Loizos Th. and Gonzalez, Steven (2017) Enabling paradigm change and agility at NASA's Johnson Space Center : interview with Chief Technology Officer, Douglas Terrier. Space Policy, 39-40 . pp. 20-25. doi:10.1016/j.spacepol.2017.01.003

Tripathy, Yashraj, McGordon, Andrew and Low, John C. T. (2018) A new consideration for validating battery performance at low ambient temperatures. Energies, 11 (9). 2439. doi:10.3390/en11092439

Turley, Glen A., Kiraci, Ercihan, Olifent, Alan, Attridge, Alex, Tiwari, Manoj K. and Williams, M. A. (Mark A.) (2014) Evaluation of a multi-sensor horizontal dual arm coordinate measuring machine for automotive dimensional inspection. The International Journal of Advanced Manufacturing Technology, Volume 72 (Number 9-11). pp. 1665-1675. doi:10.1007/s00170-014-5737-3

Uddin, Kotub , Moore, Andrew D. , Barai, Anup and Marco, James (2016) The effects of high frequency current ripple on electric vehicle battery performance. Applied Energy, 178 . pp. 142-154. doi:10.1016/j.apenergy.2016.06.033

Wang, Xuanxuan, Feng, Wei, Chen, Yunfei and Ge, Ning (2018) Coverage optimization for UAV-aided Internet of Things with partial channel knowledge. Journal of Communications and Information Networks, 3 (4). pp. 55-63. doi:10.1007/s41650-018-0039-9

Wellings, Tom, Williams, M. A. (Mark A.) and Tennant, C. (Charles) (2010) Understanding customers' holistic perception of switches in automotive human–machine interfaces. Applied Ergonomics, Vol.41 (No.1). pp. 8-17. doi:10.1016/j.apergo.2009.03.004

Widanage, Widanalage Dhammika, Barai, Anup, Chouchelamane, G.H., Uddin, Kotub, McGordon, A., Marco, James and Jennings, P. A. (Paul A.) (2016) Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 2 : model estimation. Journal of Power Sources, 324 . pp. 61-69. doi:10.1016/j.jpowsour.2016.05.014

Wood, Benjamin M., Kirwan, Kerry, Maggs, Steven J., Meredith, James O. and Coles, Stuart R. (2015) Study of combustion performance of biodiesel for potential application in motorsport. Journal of Cleaner Production, 93 . pp. 167-173. doi:10.1016/j.jclepro.2014.12.091

Worwood, Daniel, Kellner, Quirin, Wojtala, Malgorzata, Widanage, Widanalage Dhammika, McGlen, Ryan, Greenwood, David G. and Marco, James (2017) A new approach to the internal thermal management of cylindrical battery cells for automotive applications. Journal of Power Sources, 346 . pp. 151-166. doi:10.1016/j.jpowsour.2017.02.023

Wu, Zhongze, Zhu, Zi-Qiang and Zhan, Hanlin (2017) Comparative analysis of partitioned stator flux reversal PM machine and magnetically geared machine operating in Stator-PM and Rotor-PM modes. IEEE Transactions on Energy Conversion, 32 (3). 903 -917. doi:10.1109/TEC.2017.2693028

Young, Mark S. and Birrell, Stewart A. (2012) Ecological IVIS design : using EID to develop a novel in-vehicle information system. Theoretical Issues in Ergonomics Science, Volume 13 (Number 2). pp. 225-239. doi:10.1080/1463922X.2010.505270

Young, Mark S., Birrell, Stewart A. and Stanton, Neville A. (2011) Safe driving in a green world : a review of driver performance benchmarks and technologies to support ‘smart’ driving. Applied Ergonomics, 42 (4). pp. 533-539. doi:10.1016/j.apergo.2010.08.012

Zhang, Cheng, Li, Kang, Deng, Jing and Song, Shiji (2017) Improved realtime state-of-charge estimation of LiFePO4 battery based on a novel thermoelectric model. IEEE Transactions on Industrial Electronics, 64 (1). pp. 654-663. doi:10.1109/TIE.2016.2610398

Zhao, Nan, Pang, Xiaowei, Li, Zan, Chen, Yunfei, Li, Feng, Ding, Zhiguo and Alouini, Mohamed-Slim (2019) Joint trajectory and precoding optimization for UAV-assisted NOMA networks. IEEE Transactions on Communications . (In Press)

Zhao, Nan, Yu, F. Richard, Fan, Lisheng, Chen, Yunfei, Tang, Jie, Nallanathan, Arumugam and Leung, Victor C. M. (2018) Caching UAV-enabled small-cell networks. IEEE Vehicular Technology Magazine . (In Press)

Book Item

Birrell, Stewart A., Fowkes, Mark and Stubbs, Deborah (2012) Evaluation of smart driving advisors : smartphone apps or value added services. In: Dorn, Lisa, (ed.) Driver Behaviour and Training. Aldershot: Ashgate, pp. 451-470. ISBN 9781409443049

Birrell, Stewart A. and Young, Mark S. (2013) Smart driving assistance systems : designing and evaluating ecological and conventional displays. In: Regan, Michael A. and Lee, John D. and Victor, Trent W., (eds.) Driver distraction and inattention : advances in research and countermeasures. Aldershot: Ashgate, pp. 373-388. ISBN 9781409425854

Conference Item

Barai, Anup, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2014) An exploration of Li-ion cell relaxation using EIS. In: FISITA world automotive congress, Maastricht, Netherlands, 2-6 Jun 2014

Barai, Anup, Guo, Yue, McGordon, Andrew and Jennings, P. A. (Paul A.) (2013) A study of the effects of external pressure on the electrical performance of a lithium-ion pouch cell. In: 2013 International Conference on Connected Vehicles and Expo (ICCVE), Las Vegas, USA, 2-6 Dec 2013. Published in: 2013 International Conference on Connected Vehicles and Expo (ICCVE) 295- 299. doi:10.1109/ICCVE.2013.6799809

Barai, Anup, Rajan, Ashwin T., Christos, Iraklis, McGordon, Andrew and Jennings, P. A. (Paul A.) (2017) Scale-up of lithium-ion battery model parameters from cell level to module level – identification of current issues. In: The International Conference series on Alternative Energy in Developing Countries and Emerging Economies (AEDCEE), Bangkok, Thailand, 25-26 May 2017. Published in: Energy Procedia ISSN 1876-6102.

Bektas, Oguz and Jones, Jeffrey Alun (2016) NARX time series model for remaining useful life estimation of gas turbine engines. In: Third European Conference of the Prognostics and Health Management Society 2016, Bilbao, Spain, 5-8 Jul 2016. Published in: Third European Conference of the Prognostics and Health Management Society 2016, 7

Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2011) Modelling of 4WD vehicle driveability during tip-in/tip-out events. In: 22nd International Symposium on Dynamics of Vehicle on Road and Tracks (IAVSD), Manchester Metropolitan University, Manchester, UK, 14-19 Aug 2011. Published in: Proceedings of the 22nd IAVSD Symposium (No.85). ISBN 9781905476596.

Bin Raja Ahsan Shah, Raja Mazuir, Cheng, Caizhen, Jones, R. Peter and Pawar, Jasjit (2012) Shuffle frequency migration of 4WD vehicle. In: Regional Conference on Automotive Research, Kuala Lumpur, Malaysia, 14-15 Dec 2011 (No.P023).

Birrell, Stewart A., McGordon , A. and Jennings, P. A. (2014) Defining the accuracy of real-world range estimations of an electric vehicle. In: 17th International Conference on Intelligent Transportation Systems (ITSC 2014), Qingdao, China, 8-11 Oct 2014. Published in: Proceedings of the Intelligent Transportation Systems (ITSC), 2014 IEEE 17th International Conference 2590 -2595. doi:10.1109/ITSC.2014.6958105

Birrell, Stewart A. and Young, Mark S. (2009) Smart driving aids and their effects on driving performance and driver distraction. In: 1st International Conference on Driver Distraction and Inattention, Gothenburg, Sweden, 28-29 Sep 2009 pp. 1-16.

Birrell, Stewart A., Young, Mark S., Jenkins, Daniel P. and Stanton, Neville A. (2008) Improving driver behaviour by design : a cognitive work analysis methodology. In: 2nd International Conference on Applied Human factors and Ergonomics, Las Vegas, USA, 14-17 Jul 2008

Bisschoff, Wilhelm, Zabihi, Nima and Gouws, Rupert (2017) Development of an energy source management system for a prototype supercapacitor rough terrain mine vehicle. In: International Conference on Electrical, Electronics, Computers, Communication, Mechanical and Computing (EECCMC), Tamil Nadu, India, 28-29 Jan 2018 (Unpublished)

Chakrapani Rao, Arun (2018) More automated formal methods?! : If so, why, where & how? In: Automated Formal Methods Workshop 2017, in association with 9th NASA Formal Methods Symposium (NFM) 2017, Moffett Field, California, USA, 19-20 May 2017 . Published in: Proceedings of Automated Formal Methods (AFM) 2017, in association with 9th NASA Formal Methods Symposium (NFM) 2017, 5 pp. 50-62. ISSN 2515-1762. doi:10.29007/k317

Chakrapani Rao, Arun, Kakade, Rupesh and Murugesan, Mohan (2012) Utilization of simulink verification and validation (V&V) and simulink design verifier (SDV) for HVAC controls software. In: MATLAB EXPO 2012 India, Bengaluru (formerly Bangalore), India, 08 Aug 2012

Chakrapani Rao, Arun, Kakade, Rupesh and Murugesan, Mohan (2013) Utilization of simulink verification and validation (V&V) and simulink design verifier (SDV) for HVAC controls software. In: MATLAB Virtual Conference 2013 - European Track, Sheffield, United Kingdom, 20 Mar 2013

Das, Abhishek, Li, Dezhi, Williams, D. K. and Greenwood, David G. (2018) Joining technologies for automotive battery systems manufacturing. In: The 30th International Electric Vehicle Symposium & Exhibition, Stuttgart, Germany, 9-11 Oct 2017. Published in: World Electric Vehicle Journal, 9 (2). ISBN 9781510863705. ISSN 2032-6653. doi:10.3390/wevj9020022

Dinh, Quang Truong, Marco, James, Greenwood, David G., Harper, L. and Corrochano, D. (2016) Powertrain modelling and engine start control of construction machines. In: 3rd International Conference on Powertrain Modelling and Control Testing, Mapping and Calibration, Loughborough University, UK, 7-9 Sep 2016

Grandjean, Thomas R. B., Taylor, J. E., McGordon, Andrew and Marco, James (2018) Improved sizing calculator for rapid optimisation of pack configuration at early-stage automotive product development. In: 2018 IEEE Vehicle Power and Propulsion Conference (VPPC), Chicago, USA, 27–30 Aug 2018. Published in: Proceedings of 2018 IEEE Vehicle Power and Propulsion Conference (VPPC) (In Press)

Haq, Izhar Ul, Masood, Tariq, Ahmad, Bilal, Harrison, Robert, Raza, Bagar and Monfared, Radmehr P. (2011) Product to process lifecycle management in assembly automation systems. In: 7th International Conference on Digital Enterprise Technology, Athens, Greece, 28-30 Sep 2011. Published in: Proceedings of DET2011 pp. 1-11.

Hosseinzadeh, Elham, Barai, Anup, Marco, James and Jennings, P. A. (Paul A.) (2017) A comparative study on different cooling strategies for lithium-ion battery cells. In: The European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC 2017) , Geneva, 14-16 Mar 2017. Published in: The European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC 2017) Proceedings pp. 1-9.

Ivanov, Ivan V., Maple, Carsten, Watson, Tim and Lee, S. (2018) Cyber security standards and issues in V2X communications for Internet of Vehicles. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, IET London, Savoy Place, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 ISBN 9781785618437. doi:10.1049/cp.2018.0046

Jeffs, James, McGordon, Andrew, Widanage, Widanalage Dhammika, Robinson, Simon and Picarelli, Alessandro (2018) Use of a thermal battery with a heat pump for low temperature electric vehicle operation. In: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC), Belfort, France, 11-14 Dec 2017 ISBN 9781538613177. doi:10.1109/VPPC.2017.8330932

Jiang, R., Gao, N., Reed, P. A.S., Proprentner, Daniela, Shollock, Barbara A., Farukh, F. and Zhao, L. (2015) Effects of oxidation on fatigue crack initiation and propagation in an advanced disc alloy. In: The 9th International Charles Parsons Turbine and Generator Conference, Loughborough, 15-17th Sep 2015

Kellner, Quirin, Widanage, Widanalage Dhammika and Marco, James (2016) Battery power requirements in high-performance electric vehicles. In: 2016 IEEE Transportation Electrification Conference and Expo (ITEC), Dearborn, MI, USA, 27-29 Jun 2016 pp. 1-6. doi:10.1109/ITEC.2016.7520194

Kellner, Quirin, Worwood, Daniel, Widanage, Widanalage Dhammika and Marco, James (2017) Electrical and thermal behaviour of pouch-format lithium ion battery cells under high-performance and standard automotive duty-cycles. In: IEEE Vehicle Power and Propulsion Conference, Belfort, France, 11-14 Dec 2017. Published in: IEEE Vehicle Power and Propulsion Conference (In Press)

Khastgir, Siddartha, Birrell, Stewart A., Dhadyalla, Gunwant and Jennings, P. A. (Paul A.) (2018) The science of testing : an automotive perspective. In: SAE World Congress Experience, WCX 2018, Detroit, United States, 10-12 April 2018. Published in: SAE Technical Papers, 2018 ISSN 0148-7191. doi:10.4271/2018-01-1070

Khastgir, Siddartha, Sivencrona, Håkan, Dhadyalla, Gunwant, Billing, Peter, Birrell, Stewart A. and Jennings, P. A. (Paul A.) (2017) Introducing ASIL inspired dynamic tactical safety decision framework for automated vehicles. In: IEEE 20th International Conference on Intelligent Transportation Systems , Yokohama, Japan, 16-19 Oct 2017. Published in: IEEE 20th International Conference on Intelligent Transportation Systems (In Press)

Kong, Xiangyu, Ahmad, Bilal, Harrison, Robert, Jain, Atul, Park, Y. and Lee, Leslie J. (2011) Realising the open virtual commissioning of modular automation systems. In: 7th International Conference on Digital Enterprise Technology, Athens, Greece, 28-30 Sep 2011. Published in: Proceedings of DET2011 pp. 1-9.

Le, Anhtuan, Maple, Carsten and Watson, Tim (2018) A profile-driven dynamic risk assessment framework for connected and autonomous vehicles. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, London, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 pp. 1-8. ISBN 9781785618437. doi:10.1049/cp.2018.0020

Liu, Kailong, Li, Kang, Yang, Zhile, Zhang, Cheng and Deng, Jing (2016) Battery optimal charging strategy based on a coupled thermoelectric model. In: 2016 IEEE Congress on Evolutionary Computation (CEC), Vancouver, Canada, 24-29 Jul 2016. Published in: 2016 IEEE Congress on Evolutionary Computation (CEC) pp. 5084-5091. ISBN 9781509006236. doi:10.1109/CEC.2016.7748334

Lu, Yi, Maple, Carsten, Sheik, Al Tariq, Alhagagi, Hussam A., Watson, Tim, Dianati, Mehrdad and Mouzakitis, Alexandros (2018) Analysis of cyber risk and associated concentration of research (ACR)² in the security of vehicular edge clouds. In: Living in the Internet of Things: Cybersecurity of the IoT - 2018, London, 28-29 Mar 2018. Published in: Proceedings of Living in the Internet of Things: Cybersecurity of the IoT - 2018 pp. 1-11. ISBN 9781785618437. doi:10.1049/cp.2018.0019

Marco, James and Hooper, James Michael (2016) Defining a representative vibration durability test for electric vehicle (EV) rechargeable energy storage systems (RESS). In: Electric Vehicle Symposium (EVS 29), Montréal, Québec, 19-21 Jun 2016 pp. 1-12. (In Press)

Melnicuk, Vadim, Birrell, Stewart A., Crundall, Elizabeth and Jennings, P. A (2016) Towards hybrid driver state monitoring : review, future perspectives and the role of consumer electronics. In: IEEE Intelligent Vehicle Symposium (IV), Gothenburg, Sweden, 19-22 Jun 2016. Published in: 2016 IEEE Intelligent Vehicles Symposium (IV) 1392 -1397.

Melnicuk, Vadim, Birrell, Stewart A., Crundall, Elizabeth and Jennings, P. A. (Paul A.) (2017) Employing consumer electronic devices in physiological and emotional evaluation of common driving activities. In: IEEE Intelligent Vehicles Symposium, Los Angeles, California, USA, 11-14 Jun 2017. Published in: 2017 IEEE Intelligent Vehicles Symposium (IV) pp. 1529-1534. ISBN 9781509048045. doi:10.1109/IVS.2017.7995926

Melnicuk, Vadim, Birrell, Stewart A., Konstantopoulos, Panos, Crundall, Elizabeth and Jennings, P. A. (Paul A.) (2016) JLR heart : employing wearable technology in non-intrusive driver state monitoring. Preliminary study. In: IEEE Intelligent Vehicle Symposium (IV), Gothenburg, Sweden, 19-22 Jun 2016. Published in: 2016 IEEE Intelligent Vehicles Symposium (IV) pp. 55-60.

Morris, Andrew , Welsh, Ruth , Brown, Laurie, Birrell, Stewart A. and Reed , Steven (2013) Studying the effects of in-vehicle information systems on driver visual behaviour – implications for design. In: International Research Council on Biomechanics of Injury (IRCOBI 2013) , Gothenburg, Sweden, 11-13 Sept 2013. Published in: 2013 IRCOBI Conference Proceedings ISSN 2235-3151.

Oliveira, Luis, Luton, Jacob, Iyer, Sumeet, Burns, Chris G., Mouzakitis, Alexandros, Jennings, P. A. (Paul A.) and Birrell, Stewart A. (2018) Evaluating how interfaces influence the user interaction with fully autonomous vehicles. In: AutomotiveUI '18 : 10th International ACM Conference on Automotive User Interfaces and Interactive Vehicular Applications, Toronto, Canada, 23-25 Sep 2018. Published in: AutomotiveUI '18 Proceedings of the 10th International Conference on Automotive User Interfaces and Interactive Vehicular Applications pp. 320-331. doi:10.1145/3239060.3239065

Padmarajan, Brahmadevan V., McGordon, Andrew and Jennings, P. A. (Paul A.) (2012) An investigation on the effect of driver style and driving events on energy demand of a PHEV. In: EVS26 Los Angeles, California, May 6-9, 2012, Los Angeles, California, USA., 2012

Rajan, Ashwin T., McGordon, Andrew and Marco, James (2018) Prediction of storage ageing in a lithium ion battery using data-driven model and electrochemical model. In: UKES2018- UK Energy storage conference 2018, Newcastle, UK, 20-22 Mar 2018 (Unpublished)

Ren, Yaxing, Truong, Dinh Quang, Marco, James, Greenwood, David G. and Hessar, Changiz (2018) Nonlinearity compensation based tilting controller for electric narrow tilting vehicles. In: IEEE International Conference on Control, Decision and Information Technologies, Thessaloniki, Greece, 10-13 Apr 2018 (In Press)

Rodrigues, M., McGordon, Andrew, Gest, Graham and Marco, James (2017) Developing and testing of control software framework for autonomous ground vehicle. In: IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC), Coimbra, Portugal, 26-28 May 2017 (In Press)

Rodrigues, Maradona, McGordon, Andrew, Gest, Graham and Marco, James (2016) Adaptive tactical behaviour planner for autonomous ground vehicle. In: The 2016 UKACC International Conference on Control (UKACC Control 2016) , Belfast, 31 Aug - 02 Sep 2016. Published in: The 2016 UKACC International Conference on Control (UKACC Control 2016) ISBN 9781467398923.

Rodrigues, Maradona, McGordon, Andrew, Marco, James and Gest, Graham (2017) Adaptive behaviour selection for autonomous vehicle through naturalistic speed planning. In: IEEE 20th International Conference on Intelligent Transportation Systems , Yokohama, Japan, 16-19 Oct 2017. Published in: 20th International Conference on Intelligent Transportation Systems (ITSC) 2017, IEEE (In Press)

Roy, Hillol K., McGordon, Andrew and Jennings, P. A. (Paul A.) (2016) Effect of powertrain design optimisation methodologies on battery system efficiency of a hybrid electric vehicle. In: SAE 2016 World Congress and Exhibition, Detroit, USA, 12-14 Apr 2016. Published in: SAE Technical Papers, 1 (2016-01-1214). ISSN 0148-7191. doi:10.4271/2016-01-1214

Santos, Cláudio, Abubakar, Sharbanom, Barros, Ana Cristina and Godsell, Janet (2016) The role of organizational networks in the development of technological capabilities. In: EUROMA 2016, Trondheim, Norway, 17-22 Jun 2016 (Unpublished)

Sarafianos, Dimitrios, Llano Chiguano, Danilo X (Xavier), McMahon, Richard A., Flack, Timothy J., Wen, Bo and Pickering, Stephen (2017) Efficiency improvement and power loss breakdown for a Lundell-alternator/active-rectifier system in automotive applications. In: IECON 2017, Beijing, China, 29 Oct - 01 Nov 2017. Published in: IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society

Sarafianos, Dimitrios, Llano Chiguano, Danilo X (Xavier), Wen, Bo, Flack, Timothy J., McMahon, Richard A. and Pickering, Stephen (2017) Control and efficiency analysis for a Lundell-alternator/active-rectifier system in automotive applications. In: IEEE Annual Southern Power Electronics Conference (SPEC), Auckland, New Zealand, 5-8 Dec 2016. Published in: 2016 IEEE 2nd Annual Southern Power Electronics Conference (SPEC) ISBN 9781509015474.

Shah, Raja Mazuir Bin Raja Ahsan, McGordon, Andrew, Amor-Segan, Mark and Jennings, P. A. (Paul A.) (2013) Micro gas turbine range extender : validation techniques for automotive applications. In: 4th Hybrid Electric Vehicle Conference (HEVC 2013), London, United Kingdom, 6-7 Nov 2013. Published in: HEVC 2013 : 4th Hybrid and Electric Vehicles Conference. ISBN 9781849197755. doi:10.1049/cp.2013.1913

Sheik, Al Tariq, Maple, Carsten, Watson, Tim, Alhagagi, Hussam A., Sohrabi Safa, Nader and Lee, Sang Woo (2017) A threat based approach to computational offloading for collaborative cruise control. In: The Second International Conference on Internet of Things, Data and Cloud Computing (ICC 2017), University of Cambridge, United Kingdom, 22-23 March 2017. Published in: ICC '17 Proceedings of the Second International Conference on Internet of things and Cloud Computing ISBN 9781450347747. doi:10.1145/3018896.3056792

Shreejith, Shanker, Ambede, Abhishek, Vinod, A. P. and Fahmy, Suhaib A. (2016) A power and time efficient radio architecture for LDACS1 air-to-ground communication. In: Digital Avionics Systems Conference, Sacramento, CA, 25 - 29 Sep 2016. Published in: Proceedings of the Digital Avionics Systems Conference (In Press)

Shrouti, Chetan, Franciosa, Pasquale and Ceglarek, Darek (2015) Root cause analysis of product service failure using computer experimentation technique. In: 2nd International Through-life Engineering Services Conference, UK, 5- 6 Nov 2013. Published in: Procedia CIRP, 11 pp. 44-49. ISSN 2212-8271. doi:10.1016/j.procir.2013.07.069

Singh, Sneha, Payne, Sarah R. and Jennings, P. A. (Paul A.) (2013) Detection and emotional evaluation of an electric vehicle’s exterior sound in a simulated environment. In: Inter-Noise 2013, Innsbruck, Austria, 15-18 Sep 2013. Published in: Inter-Noise Proceedings pp. 1-9.

Taylor, James, Ball, Robert, McGordon, Andrew, Uddin, Kotub and Marco, James (2015) Sizing tool for rapid optimisation of pack configuration at early-stage automotive product development. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-6 May 2015

Taylor, Phillip M., Griffiths, Nathan, Bhalerao, Abhir, Xu, Zhou, Gelencser, Adam and Popham, T. J. (2015) Warwick-JLR driver monitoring dataset (DMD) : statistics and early findings. In: 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications, Nottingham, UK, 1–3 Sep 2015. Published in: Proceedings of the 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications pp. 89-92. ISBN 9781450337366.

Thethi, Anmoal, Dhadyalla, Gunwant, McGordon, Andrew and Amor-Segan, Mark (2013) Experiences with the Technical Accreditation Scheme (TAS) 'teaching the trainee'. In: EDULEARN 13 5th International Conference on Education and New Learning Technologies, Barcelona, Spain, 1-3 Jul 2013. Published in: EDULEARN13 Proceedings pp. 5162-5169. ISBN 9788461638222. ISSN 2340-1117.

Tripathy, Yashraj, Marco, James, McGordon, Andrew and Gama-Valdez , Miguel (2014) State-of-charge estimation algorithms and their implications on cells in paralle. In: IEEE International Electric Vehicle Conference 2014, Florence, Italy, 17–19 Dec 2014. Published in: Proceedings of the IEEE International Electric Vehicle Conference 2014 (In Press)

Tripathy, Yashraj, McGordon, Andrew, Low, John C. T. and Marco, James (2016) Low temperature performance of Lithium-ion batteries for different drive cycles. In: Electric Vehicle Symposium (EVS 29), Montréal, Québec, 19-21 Jun 2016 pp. 1-12.

Truong, M. N. B., Truong, Dinh Quang, Marco, James and Watts, Chris (2018) An energy management strategy for DC hybrid electric propulsion system of marine vessels. In: IEEE International Conference on Control, Decision and Information Technologies, Thessaloniki, Greece, 10-13 Apr 2018. Published in: 2018 5th International Conference on Control, Decision and Information Technologies (CoDIT) ISBN 9781538650646. doi:10.1109/CoDIT.2018.8394785

Tu, Ian, Bhalerao, Abhir, Griffiths, Nathan, Munoz, Mauricio, Popham, Thomas and Mouzakitis, Alexandros (2017) Deep passenger state monitoring using viewpoint warping. In: ICIAP 2017, Catania, Italy, 11-15 Sep 2017. Published in: Image Analysis and Processing - ICIAP 2017, 10485 pp. 137-148. ISBN 9783319685472. ISSN 0302-9743.

Tu, Ian, Bhalerao, Abhir, Griffiths, Nathan, Muñoz Delgado, Mauricio, Thomason, Alasdair, Popham, Thomas and Mouzakitis, Alexandros (2018) Dual viewpoint passenger state classification using 3D CNNs. In: IEEE Intelligent Vehicles Symposium (IV'18) , Chang Shu, China, 26-19 June 2018 (In Press)

Uddin, Kotub, Perera, Surak, Widanage, Widanalage Dhammika and Marco, James (2015) Characterising Li-ion battery degradation through the identification of perturbations in electrochemical battery models. In: Electric Vehicle Symposium 28 (EVS28), Goyang, Korea, 3-5 May 2015

Vignesh, Balaji Ravichandran, Grandjean, Thomas R. B., McGordon, Andrew and Greenwood, David (2018) Thermal modeling of lithium ion batteries for temperature rise predictions in hybrid vehicle application. In: 2018 Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte-Carlo, Monaco, 10-12 Apr 2018 ISBN 9781538659670. doi:10.1109/EVER.2018.8362331

Winnett, James, Iraklis, Athanasios, Keating, Elspeth, McGordon, Andrew, Ridler, Tony and Hughes, Darren J. (2017) Automotive to rail : can technologies cross the gap? In: IMechE Stephenson Conference 2017: Research for Railways, London, 25-27 April 2017 pp. 529-538. (In Press)

Worwood, Daniel, Algoo, R., McGlen, R. M., Marco, James and Greenwood, David G. (2016) A study into different cell-level cooling strategies for cylindrical lithium-ion cells in automotive applications. In: 3rd International Conference on Powertrain Modelling and Control Testing, Mapping and Calibration, Loughborough University, UK, 7-9 Sep 2016

Worwood, Daniel, Hosseinzadeh, Elham, Kellner, Quirin, Marco, James, Greenwood, David G., McGlen, R., Widanage, Widanalage Dhammika, Bara, Anup and Jennings, P. A. (Paul A.) (2016) Thermal analysis of lithium-ion pouch cells under aggressive automotive duty cycles with minimal cooling. In: IET Hybrid Electric Vehicle Conference, London, UK, 2-3 Nov 2016

Worwood, Daniel, Kellner, Quirin, Hosseinzadeh, Elham, Mullen, David, Greenwood, David, Marco, James, McGlen, Ryan and Lynn, Kevin (2018) Thermal analysis of fin cooling large format automotive lithium-ion pouch cells. In: IEEE Vehicle Power and Propulsion Conference, Belfort, France, 11-14 Dec 2017. Published in: 2017 IEEE Vehicle Power and Propulsion Conference (VPPC) ISBN 9781538613177. doi:10.1109/VPPC.2017.8330874

Young, Mark S. and Birrell, Stewart A. (2012) Ecological interface design for eco-driving. In: European conference on Human Centred Design for Intelligent Transport Systems, Valencia, Spain, 14-15 Jun 2012

Zhang, Cheng, Marco, James, Allafi, Walid, Dinh, Quang Truong and Widanage, Widanalage Dhammika (2017) Online battery electric circuit model estimation on continuous-time domain using linear integral filter method. In: 19th International Conference on Hybrid and Electric Vehicles, Prague, 23-24 Mar 2017. Published in: Proceedings of the World Academy of Science, Engineering and Technology, 4 (3). p. 823. ISSN 2010-376X.

Working or Discussion Paper

Harrison, Mark (2001) The Soviet market for inventions: the case of jet propulsion, 1932 to 1944. Working Paper. Coventry: University of Warwick, Department of Economics. Warwick economic research papers (No.605).

Li, Dezhi, Chrysanthou, Andreas, Patel, Imran and Williams, Geraint J. (2016) Self-piercing riveting - a review. Working Paper. Coventry: University of Warwick WMG. (Unpublished)

Oliveira, Alessandro V. M. (2003) The impacts of liberalisation on a Brazilian air shuttle market. Working Paper. Coventry: University of Warwick, Department of Economics. Warwick economic research papers (No.676).

Redding, Stephen, Sturm, Daniel M. and Wolf, Nikolaus (2007) History and industry location: evidence from German airports. Working Paper. Coventry: University of Warwick. Centre for the Study of Globalisation and Regionalisation. Working papers (University of Warwick. Centre for the Study of Globalisation and Regionalisation) (No.229).

Wakenshaw, Susan Y. L., Venters, Will, Ng, Irene C. L. and Lloyd, Ashley D. (2013) Sense-making of consumer wellbeing in information technology-enabled services from a relational ontology position. Working Paper. Coventry: Warwick Manufacturing Group. WMG Service Systems Research Group Working Paper Series (Number 02/13).

Book

Taylor, Phillip M., Griffiths, Nathan, Bhalerao, Abhir, Xu, Zhou, Gelencser, Adam and Popham, Thomas (2017) Investigating the feasibility of vehicle telemetry data as a means of predicting driver workload. International Journal of Mobile Human-Computer Interaction, 9 (3). IGI Global. ISBN 1942-3918 (In Press)

Submitted Journal Article

Hazra, S. K. , Roya, R., Williams, D. K., Aylmoreb, R. and Hollingdale, D. (2013) A novel inspection method for determining the cosmetic quality of automotive skin panels. Journal of Materials Processing Technology, Volume 213 . pp. 2049-2063. doi:10.1016/j.jmatprotec.2013.04.016

Thesis or Dissertation

Abaza, Ahmed (2017) Safety of automotive lithium-ion battery cells under abusive conditions : innovation report. EngD thesis, University of Warwick.

Ahtamad, Mujthaba (2013) Evaluating automotive sound quality : the disconnect between market research and structured evaluations. PhD thesis, University of Warwick.

Alsemgeest, Raimond W. (2004) The time-dependent flow through throttle valves: a computational and experimental investigation. PhD thesis, University of Warwick.

Barai, Anup (2015) Improvement of consistency, accuracy and interpretation of characterisation test techniques for Li-ion battery cells for automotive application. PhD thesis, University of Warwick.

Bastin, Matthew (2014) An investigation into the effects of hybrid electric vehicle power-trains on ride and handling. PhD thesis, University of Warwick.

Bektas, Oguz (2018) An adaptive data filtering model for remaining useful life estimation. PhD thesis, University of Warwick.

Bin Raja Ahsan Shah, Raja Mazuir (2013) Development of a 4WD vehicle powertrain system model for driveability investigation. PhD thesis, University of Warwick.

Butcher, Kent (2012) Concurrent engineering approach to complete non-linear FEA of an aircraft wheel's lock-ring. PhD thesis, University of Warwick.

Carandente, Mario (2016) FE simulation of the SPR process to predict joint characteristics : innovation report. PhD thesis, University of Warwick.

Carnegie, Craig Robert (2016) Simulation of high strain rate deformation in structural polymeric foam : innovation report. EngD thesis, University of Warwick.

Chacko, Salvio (2012) Numerical analysis of unsteady heat transfer for thermal management. PhD thesis, University of Warwick.

Cherry, Ann Susan (1992) An investigation of multibody system modelling and control analysis techniques for the development of advanced suspension systems in passenger cars. PhD thesis, University of Warwick.

Crossley, Paul Richard (1992) Modelling and analysis of traction control systems in automobiles. PhD thesis, University of Warwick.

Davis, Martin (2017) Effective vehicle attribute delivery at Jaguar Land Rover : innovation report. EngD thesis, University of Warwick.

De Matos, Paula Alexandra Leal (1998) The development of decision support models for European air traffic flow management. PhD thesis, University of Warwick.

Donnellan, Benedict T. (2013) Introducing the hybrid unipolar bipolar field effect transistor : the HUBFET. PhD thesis, University of Warwick.

Dooner, Mark (2016) Modelling, real-time simulation and control of automotive windscreen wiper systems for electronic control unit development. PhD thesis, University of Warwick.

Doric, Igor (2017) A generalised approach to active pedestrian safety testing. PhD thesis, University of Warwick.

Dunne, Gerard T. (2003) The introduction of a Sound Quality Engineering Process to Jaguar Cars : executive summary. PhD thesis, University of Warwick.

Faithfull, Paul (1999) A hardware-in-the-loop approach to independent wheel control development using a physical scale model as a low cost prototyping tool : executive summary. EngD thesis, University of Warwick.

Ferrie, John (1998) The development of process models : executive summary. PhD thesis, University of Warwick.

Gaszczak, Anna (2017) Vision based environment perception system for next generation off-road ADAS : innovation report. EngD thesis, University of Warwick.

Giudice, Sebastiano D. (2009) Sound quality evaluations using interactive simulation : innovation report. EngD thesis, University of Warwick.

Graham, Neil Anthony (1974) Airborne noise reduction of agricultural tractor cabs. PhD thesis, University of Warwick.

Graysmith, J. L. (1995) Using CFD in engine design. PhD thesis, University of Warwick.

Guo, Yue (2009) An investigation of model-based techniques for automotive electronic system development. PhD thesis, University of Warwick.

Haines, Gareth (2013) A vehicle-to-home simulation tool for the analysis of novel energy storage applications : Innovation report. PhD thesis, University of Warwick.

Hall, Wayne (2003) Finite element modelling and simulation for a 'smart' tyre. PhD thesis, University of Warwick.

Handy, Peter James (2016) The characterisation, modelling and detection of series arc faults in aircraft electrical power distribution systems featuring solid state power controllers (SSPCs). PhD thesis, University of Warwick.

Hooper, James Michael (2017) Characterising the effects of vibration on the durability of electric vehicle batteries : innovation report. EngD thesis, University of Warwick.

Hurst, Edward (Researcher in engineering) (2013) A numerical study of turbulent drag reduction using streamwise travelling waves of spanwise wall velocity. PhD thesis, University of Warwick.

Jewkes, James (2008) An improved turbulent boundary layer inflow condition, applied to the simulation of jets in cross-flow. PhD thesis, University of Warwick.

Keating, Elspeth (2016) Lightweighting of stiffness critical advanced high strength steel structures using fibre reinforced plastics. PhD thesis, University of Warwick.

Kendall, Ian R. (1999) Key challenges in the development of automotive software-based electronic control systems : executive summary. PhD thesis, University of Warwick.

Khan, Tawhid (2016) A study of cultural models in automotive HMI : framework for accommodating cultural influence. EngD thesis, University of Warwick.

Kiran, Amit (2008) Jet noise : aeroacoustic distribution of a subsonic co-axial jet. PhD thesis, University of Warwick.

Kirwan, Kerry (2002) Alternative glazing for automotive vehicles: executive summary. EngD thesis, University of Warwick.

Koerner, Stephen (1995) The British motor cycle industry, 1935-1975. PhD thesis, University of Warwick.

Kourra, Nadia (2016) The application of x-ray computed tomography in aerospace industry : innovation report. EngD thesis, University of Warwick.

Lambert, Stephen (Researcher in manufacturing) (2013) Advancing the development of hybrid electric vehicles in motorsport : innovation report. EngD thesis, University of Warwick.

Leverton, Timothy A. (1998) The use of concurrent engineering methodologies : achieving world class product development performance in the automobile industry : executive summary. EngD thesis, University of Warwick.

Lockerby, Duncan A. (2001) Numerical simulation of boundary-layer control using MEMS actuation. PhD thesis, University of Warwick.

Matthews, Julian Charles, 1969- (1994) An optimisation study on the control of clutch engagement in an automotive vehicle. PhD thesis, University of Warwick.

McMurran, Ross (2014) Design for robustness of complex automotive electronic systems. PhD thesis, University of Warwick.

Monteiro, Luis António Domingos Fernandes (1998) The strategic use of information in the airline industry. PhD thesis, University of Warwick.

Mouzakitis, Alexandros (2016) Innovative solutions for automotive embedded software development : innovation report. EngD thesis, University of Warwick.

Mutalip, Zaiton Abdul (2016) Investigation of optical wireless for employment within a vehicular environment. PhD thesis, University of Warwick.

Newton, Claudia (2017) Towards sustainable luxury materials selection : measuring the perceived quality of automotive interior materials : innovation report. EngD thesis, University of Warwick.

O'Connell, Sean (1995) The social and cultural impact of the car in interwar Britain. PhD thesis, University of Warwick.

Oliveira, Alessandro V. M. (2004) Three essays on competition in airline markets with recent liberalisation. PhD thesis, University of Warwick.

Parfitt, Claire E. (2012) Characterisation, modelling and management of lithium-sulphur batteries for spacecraft applications. PhD thesis, University of Warwick.

Patterson, Fiona D. (2002) Project risk management and its application into the automotive manufacturing industry: executive summary. EngD thesis, University of Warwick.

Poxon, John E. W. (2009) Development and use of a hybrid electric vehicle (HEV) model for interactive customer assessment of sound quality : innovation report. EngD thesis, University of Warwick.

Quigley, Christopher Patrick (2011) Design of in-vehicle networked control system architectures through the use of new design to cost and weight processes : innovation report. EngD thesis, University of Warwick.

Rajan, Brahmadevan V. P. (2014) Plug in hybrid electric vehicle energy management system for real world driving. PhD thesis, University of Warwick.

Ravenhill, Emma R. (2017) Crystallisation at functionalised interfaces. PhD thesis, University of Warwick.

Riggs, Ian (2004) Supplier selection using performance self assessment reporting in the automotive industry : executive summary. EngD thesis, University of Warwick.

Rihawi, Zeina (2016) Optical wireless channel characterisation in guided structures (vehicle applications). PhD thesis, University of Warwick.

Robinson, A. J. (2000) Petrol engine development strategy : executive summary. EngD thesis, University of Warwick.

Robson, Sue (2002) A framework for the development of the polymer recycling system in the UK to achieve compliance with the European directive on end of life vehicles : executive summary. EngD thesis, University of Warwick.

Roy, Hillol K. (2014) A generalised powertrain component size optimisation methodology to reduce fuel economy variability in hybrid electric vehicles. PhD thesis, University of Warwick.

Sharma, Sanjeev (2014) Sandwich steels for crash energy absorption applications. PhD thesis, University of Warwick.

Shi, Yanglin (2016) Modelling and optimization of remote laser welding galvanized steels using statistical methodologies. MSc thesis, University of Warwick.

Shipley, A. (Adrian) (2011) Theory of partial discharge and arc formation. PhD thesis, University of Warwick.

Singh, Sneha (2016) Understanding and improving methods for exterior sound quality evaluation of hybrid and electric vehicles. PhD thesis, University of Warwick.

Suwatthikul, Jittiwut (2008) A framework and methods for on-board network level fault diagnostics in automobiles. PhD thesis, University of Warwick.

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Tennant, Charles (1998) Deployment of a company wide quality strategy in the automotive business : executive summary. EngD thesis, University of Warwick.

Thomas, Alister Julian (1995) Modelling of an automotive natural gas engine for A/F control investigations. PhD thesis, University of Warwick.

Verhaeghe, Ing G. (2008) Achieving aerospace standard porosity levels when welding thin and thick-section aluminium using fibre-delivered lasers : executive summary. EngD thesis, University of Warwick.

White, Claire Louise (2017) Recreating daylight for vehicle interior evaluations:innovation report. EngD thesis, University of Warwick.

Whittaker, Lucy M. T. (2001) Modelling and analysis of current and concept vehicles for the purpose of enhancing vehicle handling: executive summary. EngD thesis, University of Warwick.

Wong, Chup-Chung (2015) Moving object detection for automobiles by the shared use of H.264/AVC motion vectors : innovation report. EngD thesis, University of Warwick.

Wood, Benjamin M. (2011) Overcoming the barriers to sustainable motorsport. EngD thesis, University of Warwick.

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Dataset

Bruen, Thomas (2016) Data for Modelling and experimental evaluation of parallel connected lithium ion cells for an electric vehicle battery system. [Dataset]

Kampert, Erik (2018) Data for Investigating the V2V millimeter-wave channel near a vehicular headlight in an engine bay. [Dataset]

Kellner, Quirin, Hosseinzadeh, Elham, Chouchelamane, Gael, Widanage, Widanalage Dhammika and Marco, James (2017) Data for Battery cycle life test development for high-performance electric vehicle applications. [Dataset]

Pastor-Fernandez, Carlos (2016) Data for A comparison between electrochemical impedance spectroscopy and incremental capacity-differential voltage as li-ion diagnostic techniques to identify and quantify the effects of degradation modes within battery management systems. [Dataset]

Worwood, Daniel, Algoo, R., McGlen, Ryan, Marco, James and Greenwood, David G. (2018) Data for A study into different cell-level cooling strategies for cylindrical lithium-ion cells in automotive applications. [Dataset] (Unpublished)