Items where Subject is "T Technology > TN Mining engineering. Metallurgy"
|Up a level|
Number of items at this level: 25.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano. (2015) DEM modelling of a jointed rock beam with emphasis on interface properties. Géotechnique Letters, 5 (1). pp. 49-55. ISSN 2045-2543
Bott, J. H., Yin, H., Sridhar, Seetharaman and Auinger, Michael. (2016) Influence of gas composition and exposure cycle on the formation of surface and subsurface oxides in iron-aluminium-based alloys at high temperatures. Metallurgical and Materials Transactions B, 47 (4). pp. 2157-2163. ISSN 1073-5615
Clark, Samuel J., Janik, Vit, Rijkenberg, Arjan and Sridhar, Seetharaman. (2016) Analysis of the extent of interphase precipitation in V-HSLA steels through in-situ characterization of the γ/α transformation. Materials Characterization, 115 . 83 - 89. ISSN 1044-5803
Gisby, John, Taskinen, Pekka, Pihlasalo, Jouni, Li, Zushu, Tyrer, Mark, Pearce, Jonathan, Avarmaa, Katri, Björklund, Peter, Davies, Hugh, Korpi, Mikko, Martin, Susan, Pesonen, Lauri and Robinson, Jim. (2016) MTDATA and the prediction of phase equilibria in oxide systems : 30 years of industrial collaboration. Metallurgical and Materials Transactions B . ISSN 1073-5615 (In Press)
Haigh, R. D., Hutchings, M. T., Fitzpatrick, M. E., James, J. A., Okido, S., Mizuno, R., Ogawa, K. and Hughes, Darren J.. (2016) Residual stress characterization of single and triple-pass autogenously welded stainless steel pipes. International Journal of Pressure Vessels and Piping, 144 . ISSN 0308-0161
Hazra, S. (Sumit), Williams, D., Roy, R., Aylmore, R. and Smith, A.. (2011) Effect of material and process variability on the formability of aluminium alloys. Journal of Materials Processing Technology, Vol.211 (No.9). pp. 1516-1526. ISSN 0924-0136
Janik, Vit, Lan, Yongjun, Beentjes, Peter, Norman, David, Hensen, Guido and Sridhar, Seetharaman. (2016) Zn diffusion and α-Fe(Zn) layer growth during annealing of Zn-coated B steel. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 47 (1). pp. 400-411. ISSN 1073-5623
Liu, Jun, Hao, X. J., Zhou, L., Strangwood, Martin, Davis, C. L. and Peyton, A. J.. (2012) Measurement of microstructure changes in 9Cr–1Mo and 2.25Cr–1Mo steels using an electromagnetic sensor. Scripta Materialia, Volume 66 (Number 6). pp. 367-370. ISSN 1359-6462
Mathew, James, Mandal, Animesh, Warnett, Jason, Williams, Mark A., Chakraborty, M. and Srirangam , Prakash. (2016) X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB2 semi-solid forged composites. Materials Characterization . ISSN 1044-5803 (In Press)
Mu, Y. L., Wang, Q. D., Hu, M. L., Janik, Vit and Yin, D. D.. (2013) Elevated-temperature impact toughness of Mg–(Gd, Y)–Zr alloy. Scripta Materialia, Volume 68 (Number 11). pp. 885-888. ISSN 1359-6462
Rahnama, Alireza, Dashwood, R. J. and Seetharaman, Sridhar. (2017) A phase-field method coupled with CALPHAD for the simulation of ordered κ-carbide precipitates in both disordred γ and α phases in low density steel. Computational Materials Science, 126 . pp. 152-159. ISSN 0927-0256
Rahnama, Alireza and Qin, R. S.. (2015) Effect of electric current pulses on the microstructure and niobium carbide precipitates in a ferritic-pearlitic steel at an elevated temperature. Journal of Materials Research, 30 (20). pp. 3049-3055. ISSN 0884-2914
Rahnama, Alireza, Spooner, Stephen and Seetharaman, Sridhar. (2017) Control of intermetallic nano-particles through annealing in duplex low density steel. Materials Letters, 189 . pp. 13-16. ISSN 0167-577X
Rout, Bapin Kumar, Brooks, Geoff, Subagyo, Ir, Rhamdhani, M. Akbar and Li, Zushu. (2016) Modeling of droplet generation in a top blowing steelmaking process. Metallurgical and Materials Transactions B . ISSN 1073-5615 (In Press)
Shen, Ping, Zhang, Lifeng, Wang, Yi, Sridhar, Seetharaman and Wang, Qiangqiang. (2016) Wettability between molten slag and dolomitic refractory. Ceramics International, 42 (14). pp. 16040-16048. ISSN 0272-8842
Wang, Qiangqiang, Zhang, Lifeng and Sridhar, Seetharaman. (2016) Modeling on fluid flow and inclusion motion in centrifugal continuous casting strands. Metallurgical and Materials Transactions B, 47 (4). pp. 2623-2642. ISSN 1073-5615
Wang, Zhanjun, Sun, Yongqi, Sridhar, Seetharaman, Zhang, Mei and Zhang, Zuotai. (2016) Investigation on viscosity and non-isothermal crystallization behavior of P-bearing steelmaking slags with varying TiO2 content. Metallurgical and Materials Transactions B . ISSN 1073-5615 (In Press)
Yin, D. D., Wang, Q. D., Boehlert, C. J. and Janik, Vit. (2012) Creep and fracture behavior of peak-aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct). Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, Vol.43 (No.9). pp. 3338-3350. ISSN 1073-5623
Zhuang, Qian D., Anyebe, Ezekiel A., Sanchez, Ana M., Rajpalke, Mohana K., Veal, T. D. (Tim D.), Zhukov, Alexander, Robinson, Benjamin J., Anderson, Frazer, Kolosov, Oleg and Fal’ko, Vladimir. (2014) Graphitic platform for self-catalysed InAs nanowires growth by molecular beam epitaxy. Nanoscale Research Letters, Volume 9 (Number 1). Article number 321. ISSN 1556-276X
Moztarzadeh, Hadi, Hughes, Darren J., Seth, Sampan, Keating, Elspeth, Kirachi, Ercihan , Gibbons, Gregory John and Dashwood, R. J. (2015) Evolution of residual stresses in linear deposition wire-based cladding of Ti-6Al-4V. In: 8th International Conference on Mechanical Stress Evaluation by Neutron & Synchrotron Radiation MACASENS 2015, Grenoble, France, 30 Sep -2 Oct 2015. Published in: Materials Science Forum (In Press)
Spooner, Stephen, Assis, Andre N., Warnett, Jason, Fruehan, Richard J., Williams, M. A. (Mark A.) and Sridhar, Seetharaman (2015) CSLM, XCT Couple interrogation of the emulsification interaction between free steel droplets suspended in steel making slags. In: CTSSC-EMI Symposium, Tokyo, Japan, 3-4 Sep 2015
Working or Discussion Paper
Sikod, Fondo (2006) Globalisation and rural development in Africa: the case of the Chad-Cameroon oil pipeline. Working Paper. Coventry: University of Warwick. Centre for the Study of Globalisation and Regionalisation. Working papers (University of Warwick. Centre for the Study of Globalisation and Regionalisation) (No.203).
Thesis or Dissertation
Fisher, Chris (1978) Free miners and colliers: custom, the crown and trade unionism in the Forest of Dean, 1788-1886. PhD thesis, University of Warwick.
Hoult, A. P. (1999) An experimental analysis of solid state pulsed laser melting of aluminium. PhD thesis, University of Warwick.
Kawana, Albert Jacob (1988) The political economy of mining laws and regulations in Namibia from 1884 to 1986. PhD thesis, University of Warwick.