Items where Subject is "T Technology > TP Chemical technology"
|Up a level|
Number of items at this level: 149.
Ahearne, Mark, Yang, Y. (Ying), Then, K. Y. and Liu, Kuo-Kang. (2008) Non-destructive mechanical characterisation of UVA/riboflavin crosslinked collagen hydrogels. British Journal of Ophthalmology, Vol.92 (No.2). pp. 268-271. ISSN 0007-1161
Al-Amin, Mohammad and Murphy, John D.. (2017) Passivation effects on low-temperature gettering in multicrystalline silicon. IEEE Journal of Photovoltaics, 7 (1). pp. 68-77. ISSN 2156-3381
Amietszajew, Tazdin, Seetharaman, Sridhar and Bhagat, Rohit. (2016) Metal recovery by electrodeposition from a molten salt two-phase cell system. Journal of The Electrochemical Society, 163 (9). D515-D521. ISSN 0013-4651
Antonik, Paweł M., Eissa, Ahmed M., Round, Adam R., Cameron, Neil R. and Crowley, Peter B.. (2016) Noncovalent PEGylation via lectin–glycopolymer interactions. Biomacromolecules, 17 (8). pp. 2719-2725. ISSN 1525-7797
Arasaradnam, Ramesh P., Ouaret, N., Thomas, M. G., Hetherington, E., Quraishi, M. N., Nwokolo, Chuka U., Bardhan, Karna Dev and Covington, James A.. (2012) OC-163 identification of inflammatory bowel disease (IBD) using field asymmetric ion mobility spectrometry (FAIMS). Gut, Vol.61 (Suppl.2). A70. ISSN 0017-5749
Bano , Anthony M., Rodger , P. Mark and Quigley, David (Researcher in physics). (2014) New insight into the stability of CaCO3 surfaces and nanoparticles via molecular simulation. Langmuir, Volume 30 (Number 25). pp. 7513-7521. ISSN 0743-7463
Barlow, Tammie R., Brendel, Johannes C. and Perrier, Sébastien. (2016) Poly(bromoethyl acrylate) : a reactive precursor for the synthesis of functional RAFT materials. Macromolecules, 49 (17). pp. 6203-6212. ISSN 0024-9297
Beecham, Matthew P., Clarkson, Guy J., Hall, Gareth and Marsh, Andrew. (2013) Nanostructures from self-assembling triazine tertiary amine N-oxide amphiphiles. ChemPhysChem, Volume 14 (Number 17). pp. 3909-3915. ISSN 1439-4235
Bhagat, Rohit, Dye, D., Raghunathan, S. L., Talling, R. J., Inman, D. (Douglas), Jackson, B. K., Rao, K. K. (Kartik K.) and Dashwood, R. J.. (2010) In situ synchrotron diffraction of the electrochemical reduction pathway of TiO2. Acta Materialia, Vol.58 (No.15). pp. 5057-5062. ISSN 1359-6454
Bhagat, Rohit, Jackson, M., Inman, D. and Dashwood, R. J.. (2008) Production of Ti-W alloys from mixed oxide precursors via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.156 (No.1). E1-E7. ISSN 0013-4651
Chen, Kuiyong, Huang, Xiaobin, Wan, Chaoying and Liu, Hong. (2016) Heteroatom–doped hollow carbon microspheres based on amphiphilic supramolecular vesicles and highly crosslinked polyphosphazene for high performance supercapacitor electrode materials. Electrochimica Acta . ISSN 0013-4686 (In Press)
Cherrington, Ruth, Hughes, Darren J., Senthilarasu, S. and Goodship, Vannessa. (2015) Inkjet-printed TiO2 nanoparticles from aqueous solutions for dye-sensitized solar cells (DSSCs). Energy Technology . ISSN 2194-4288 (In Press)
Clark, Andrew J. and Hoong, Seng Soi. (2014) Copolymers of tetrahydrofuran and epoxidized vegetable oils : application to elastomeric polyurethanes. Polymer Chemistry, 5 (9). pp. 3238-3244. ISSN 1759-9954
Dao, Vu H., Cameron, Neil R. and Saito, Kei. (2016) Synthesis, properties and performance of organic polymers employed in flocculation applications. Polymer Chemistry, 7 (1). pp. 11-25. ISSN 1759-9954
Dobrzanska, Dorota A., Cooper, A. (Amy), Dowson, Christopher G., Evans, Stephen D., Fox, D. J. (David J.), Johnson, Benjamin R., Biggs, Caroline I., Randev, Rajan, Stec, Helena M., Taylor, Paul C. and Marsh, Andrew. (2013) Oxidation of tertiary amine-derivatized surfaces to control protein adhesion. Langmuir, Volume 29 (Number 9). pp. 2961-2970. ISSN 0743-7463
Doncom, Kay E. B., Willcock, Helen and O’Reilly, Rachel K.. (2017) The direct synthesis of sulfobetaine-containing amphiphilic block copolymers and their self-assembly behavior. European Polymer Journal, 87 . pp. 497-507. ISSN 0014-3057
E, Sharel P., Kim, Yang-Rae, Perry, David, Bentley, Cameron Luke and Unwin, Patrick R.. (2016) Nanoscale electrocatalysis of hydrazine electro-oxidation at blistered graphite electrodes. ACS Applied Materials & Interfaces, 8 (44). pp. 30458-30466. ISSN 1944-8244
Foo, Mathias, Kim, Jongrae, Sawlekar, Rucha and Bates, Declan. (2017) Design of an embedded inverse-feedforward biomolecular tracking controller for enzymatic reaction processes. Computers & Chemical Engineering . ISSN 0098-1354 (In Press)
Freese, Christian, Unger, Ronald E., Deller, Robert C., Gibson, Matthew I., Brochhausen, Christoph, Klok, Harm-Anton and Kirkpatrick, C. James. (2013) Uptake of poly(2-hydroxypropylmethacrylamide)-coated gold nanoparticles in microvascular endothelial cells and transport across the blood–brain barrier. Biomaterials Science, Volume 1 (Number 8). pp. 824-833. ISSN 2047-4830
Gibbons, Gregory John, Williams, Reuben, Purnell, Phil and Farahi, Elham. (2010) 3D printing of cement composites. Advances in Applied Ceramics, Vol.109 (No.5). pp. 287-290. ISSN 1743-6761
Glasser, Leslie and Jenkins, H. Donald Brooke. (2016) Predictive thermodynamics for ionic solids and liquids. Physical Chemistry Chemical Physics, 18 (31). pp. 21226-21240. ISSN 1463-9076
Grammatikos, S. A., Zafari, Behrouz, Evernden, M. C., Mottram, J. T. and Mitchels, J. M.. (2015) Moisture uptake characteristics of a pultruded fibre reinforced polymer flat sheet subjected to hot/wet aging. Polymer Degradation and Stability, 121 . pp. 407-419. ISSN 0141-3910
Grammatikos, Sotirios A., Evernden, Mark, Mitchels, John, Zafari, Behrouz, Mottram, J. Toby and Papanicolaou, George C.. (2016) On the response to hygrothermal aging of pultruded FRPs used in the civil engineering sector. Materials & Design, 96 . pp. 283-295. ISSN 0264-1275
Grant, Nicholas E., Markevich, Vladimir, Mullins, Jack, Peaker, Anthony R., Rougieux, Fiacre E., Macdonald, Daniel and Murphy, John D.. (2016) Permanent annihilation of thermally activated defects which limit the lifetime of float-zone silicon. Physica Status Solidi A, 213 (11). pp. 2844-2849. ISSN 1862-6300
Gupta, Jaipal, Keddie, Daniel J., Wan, Chaoying, Haddleton, David M. and McNally, Tony. (2016) Functionalisation of MWCNTs with poly(lauryl acrylate) polymerised by Cu(0)-mediated and RAFT methods. Polymer Chemistry, 7 (23). pp. 3884-3896. ISSN 1759-9954
Gurnani, Pratik, Lunn, Andrew M. and Perrier, Sébastien. (2016) Synthesis of mannosylated and PEGylated nanoparticles via RAFT emulsion polymerisation, and investigation of particle-lectin aggregation using turbidimetric and DLS techniques. Polymer . ISSN 0032-3861 (In Press)
Heeley, Ellen L., Hughes, Darren J., Crabb, Eleanor M., Bowen, James, Bikondoa, Oier, Mayoral, Beatriz and McNally, Tony. (2017) Confirmation of a nanohybrid shish-kebab (NHSK) structure in composites of PET and MWCNTs. Journal of Polymer Science Part B: Polymer Physics, 55 (2). pp. 132-137. ISSN 0887-6266
Hehir, Sarah and Cameron, Neil R.. (2014) Recent advances in drug delivery systems based on polypeptides prepared fromN-carboxyanhydrides. Polymer International, 63 (6). pp. 943-954. ISSN 0959-8103
Horbury, Michael D., Baker, Lewis A., Quan, Wen-Dong, Greenough, Simon E. and Stavros, Vasilios G.. (2016) Photodynamics of potent antioxidants : ferulic and caffeic acids. Physical Chemistry Chemical Physics, 18 (26). pp. 17691-17697. ISSN 1463-9076
Hossein, A. K., Thorpe, Roger, Critoph, R. E. and Davies, P. A. (Philip A.). (2011) Development of a small-scale trigeneration plant based on a CI engine fuelled by neat non-edible plant oil. Journal of Scientific and Industrial Research, Vol.70 (No.8). pp. 688-693. ISSN 0022-4456
Hou, Lei, Sun, Baojiang, Geng, Xueyu , Jiang, Tingxue and Wang, Zhiyuan. (2016) Study of the slippage of particle / supercritical CO2 two-phase flow. Journal of Supercritical Fluids . ISSN 0896-8446
Isahak, Naatasha, Gody, Guillaume, Malins, Lara R., Mitchell, Nicholas J., Payne, Richard J. and Perrier, Sébastien. (2016) Single addition of an allylamine monomer enables access to end-functionalized RAFT polymers for native chemical ligation. Chemical Communications, 52 (88). pp. 12952-12955. ISSN 1359-7345
Jahdi, Saeed, Alatise, Olayiwola M., Ran, Li and Mawby, P. A. (Philip A.). (2015) Analytical modeling of switching energy of silicon carbide Schottky diodes as functions of dIDS/dt and temperature. IEEE Transactions on Power Electronics, 30 (6). pp. 3345-3355. ISSN 0885-8993
Johnson, D. W., Langford, C. R., Didsbury, M. P., Lipp, B., Przyborski, S. A. and Cameron, Neil R.. (2015) Fully biodegradable and biocompatible emulsion templated polymer scaffolds by thiol-acrylate polymerization of polycaprolactone macromonomers. Polymer Chemistry, 6 (41). pp. 7256-7263. ISSN 1759-9954
Jones, Mathew W., Mantovani, Giuseppe, Blindauer, Claudia A., Ryan, Sinead M., Wang, Xuexuan, Brayden, David J. and Haddleton, David M.. (2012) Direct peptide bioconjugation/PEGylation at tyrosine with linear and branched polymeric diazonium salts. Journal of the American Chemical Society, 134 (17). pp. 7406-7413. ISSN 0002-7863
Jones, Mathew W., Strickland, Rachel A., Schumacher, Feliz F., Caddick, Stephen, Baker, James R., Gibson, Matthew I. and Haddleton, David M.. (2012) Polymeric dibromomaleimides as extremely efficient disulfide bridging bioconjugation and pegylation agents. Journal of the American Chemical Society, 134 (3). pp. 1847-1852. ISSN 0002-7863
Joubert, Fanny, Musa, Osama M., Hodgson, David R. W. and Cameron, Neil R.. (2014) The preparation of graft copolymers of cellulose and cellulose derivatives using ATRP under homogeneous reaction conditions. Chemical Society Reviews, 43 (20). pp. 7217-7235. ISSN 0306-0012
Joubert, Fanny, Yeo, R. Paul, Sharples, Gary J., Musa, Osama M., Hodgson, David R. W. and Cameron, Neil R.. (2015) Preparation of an antibacterial poly(ionic liquid) graft copolymer of hydroxyethyl cellulose. Biomacromolecules, 16 (12). pp. 3970-3979. ISSN 1525-7797
Karikari, Thomas K., Turner, Alexandra, Stass, Robert, Lee, Leonie C.Y., Wilson, Bethany, Nagel, David A., Hill, Eric J. and Moffat, Kevin G.. (2017) Expression and purification of tau protein and its frontotemporal dementia variants using a cleavable histidine tag. Protein Expression and Purification, 130 . pp. 44-54. ISSN 1046-5928
Koncsag, Claudia I., Eastwood, Daniel C., Collis, Alana, Coles, Stuart R., Clark, Andrew J., Kirwan, Kerry and Burton, Kerry S.. (2012) Extracting valuable compounds from straw degraded by Pleurotus ostreatus. Resources, Conservation and Recycling, Vol.59 . pp. 14-22. ISSN 0921-3449
Koncsag, Claudia I., Eastwood, Daniel C. and Kirwan, Kerry. (2011) Recovering low molecular weight extractives from degraded straw by oyster mushroom at the farm scale for high value use. Biomass & Bioenergy, Vol.35 (No.7). pp. 3276-3279. ISSN 1873-2909
Kümin, Beat A.. (2010) Brewing cultures in early modern towns : an introduction. Brewery History, Vol.135 . pp. 2-9.
Lai, Stanley Chi Shing, Dudin, Petr V., Macpherson, Julie V. and Unwin, Patrick R.. (2011) Visualizing zeptomole (electro)catalysis at single nanoparticles within an ensemble. Journal of the American Chemical Society, Volume 133 (Number 28). pp. 10744-10747. ISSN 0002-7863
Lancefield, Christopher S., Rashid, Goran M. M., Bouxin, Florent, Wasak, Agata, Tu, Wei-Chien, Hallett, Jason P., Zein, Sharif, Rodriguez, Jaime, Jackson, S. David, Westwood, Nicholas J. and Bugg, Timothy D. H.. (2016) An investigation of the chemocatalytic and biocatalytic valorisation of a range of different lignin preparations : the importance of β-O-4 content. ACS Sustainable Chemistry & Engineering . ISSN 2168-0485
Langford, C. R., Johnson, D. W. and Cameron, Neil R.. (2014) Chemical functionalization of emulsion-templated porous polymers by thiol–ene “click” chemistry. Polymer Chemistry, 5 (21). pp. 6200-6206. ISSN 1759-9954
Li, Shuo, Wan, Chaoying, Wang, Shifeng and Zhang, Yong. (2016) Separation of core-shell structured carbon black nanoparticles from waste tires by light pyrolysis. Composites Science and Technology, 135 . pp. 13-20. ISSN 0266-3538
Lisk, Philip, Bonnot, Erell, Rahman, Md Taifur, Pollard, Robert, Bowman, Robert, Degirmenci, Volkan and Rebrov, Evgeny V.. (2016) Magnetic actuation of catalytic microparticles for the enhancement of mass transfer rate in a flow reactor. Chemical Engineering Journal, 306 . pp. 352-361. ISSN 1385-8947
Mallick, Kajal, -2013 and Holland, Diane. (2013) A method of surface strengthening of soda lime aluminosilicate glasses by Li and Al ion vapour treatment. Journal of Materials Science , 48 (14). pp. 5012-5021. ISSN 1573-4803
Meng, Xiang, Firczuk, Helena, Pietroni, Paola, Westbrook, Richard, Dacheux, Estelle, Mendes, Pedro and McCarthy, John E. G.. (2016) Minimum-noise production of translation factor eIF4G maps to a mechanistically determined optimal rate control window for protein synthesis. Nucleic Acids Research, 45 (2). pp. 1015-1025. ISSN 0305-1048
Metcalf, Steven John, Tamainot-Telto, Zacharie and Critoph, Robert E.. (2011) Application of a compact sorption generator to solar refrigeration: case study of Dakar (Senegal). Applied Thermal Engineering, Vol.31 (No.14-15). pp. 2197-2204. ISSN 1359-4311
Momotenko, Dmitry, McKelvey, Kim M. (Kim Martin), Kang, Minkyung, Meloni, Gabriel N. and Unwin, Patrick R.. (2016) Simultaneous interfacial reactivity and topography mapping with scanning ion conductance microscopy. Analytical Chemistry, 88 (5). pp. 2838-2846. ISSN 0003-2700
Murphy, John D., Al-Amin, Mohammad, Bothe, K., Olmo, M., Voronkov, V. V. and Falster, R. J.. (2015) The effect of oxide precipitates on minority carrier lifetime in n-type silicon. Journal of Applied Physics, 118 . 215706. ISSN 0021-8979
Murphy, John D., McGuire, R. E., Bothe, Karsten, Voronkov, V. V. and Falster, Robert J.. (2014) Minority carrier lifetime in silicon photovoltaics : the effect of oxygen precipitation. Solar Energy Materials and Solar Cells, Volume 120 (Part A). pp. 402-411. ISSN 0927-0248
Nikolaou, Vasiliki, Simula, Alexandre, Droesbeke, Martijn, Risangud, Nuttapol, Anastasaki, Athina, Kempe, Kristian, Wilson, Paul and Haddleton, David M.. (2016) Polymerisation of 2-acrylamido-2-methylpropane sulfonic acid sodium salt (NaAMPS) and acryloyl phosphatidylcholine (APC) via aqueous Cu(0)-mediated radical polymerisation. Polymer Chemistry, 7 . pp. 2452-2456. ISSN 1759-9954
N’Tsouaglo, Gawonou Kokou, Béland, Laurent Karim, Joly, Jean-François, Brommer, Peter, Mousseau, Normand and Pochet, Pascal. (2015) Probing potential energy surface exploration strategies for complex systems. Journal of Chemical Theory and Computation, 11 (4). pp. 1970-1977. ISSN 1549-9618
Ortiz Gonzalez, Jose, Aliyu, A. M., Alatise, Olayiwola M., Castellazzi, A., Ran, Li and Mawby, P. A. (Philip A.). (2016) Development and characterisation of pressed packaging solutions for high-temperature high-reliability SiC power modules. Microelectronics Reliability, 64 . pp. 434-439. ISSN 0026-2714
Oseland, Elizabeth E., Rea, Anita, de Heer, Martine, Fowler, Jeffrey and Unwin, Patrick R.. (2017) Interfacial kinetics in a model emulsion polymerisation system using microelectrochemical measurements at expanding droplets (MEMED) and time lapse microscopy. Journal of Colloid and Interface Science, 490 . pp. 703-709. ISSN 0021-9797
Ou, Xiaoxia, Xu, Shaojun, Warnett, Jason M., Holmes, Stuart M., Zaheer, Amber, Garforth, Arthur A., Williams, Mark A., Jiao, Yilai and Fan, Xiaolei. (2016) Creating hierarchies promptly : microwave-accelerated synthesis of ZSM-5 zeolites on macrocellular silicon carbide (SiC) foams. Chemical Engineering Journal . ISSN 1385-8947 (In Press)
Page, Ashley, Perry, David, Young, Philip J., Mitchell, Daniel Anthony, Frenguelli, Bruno G. and Unwin, Patrick R.. (2016) Fast nanoscale surface charge mapping with pulsed-potential scanning ion conductance microscopy. Analytical Chemistry, 88 (22). pp. 10854-10859. ISSN 0003-2700
Pappas, George S., Ferrari, Stefania , Huang, Xiaobin, Bhagat, Rohit, Haddleton, David M. and Wan, Chaoying. (2016) Heteroatom doped-carbon nanospheres as anodes in lithium ion batteries. Materials, 9 (1). 35. ISSN 1996-1944
Pasini, Martina, Fernández-Castané, Alfred , Jaramillo, Alfonso, de Mas, Carles , Caminal, Gloria and Ferrer, Pau. (2016) Using promoter libraries to reduce metabolic burden due to plasmid-encoded proteins in recombinant Escherichia coli. New Biotechnology, 33 (1). pp. 78-90. ISSN 1871-6784
Perry, David, Momotenko, Dmitry, Lazenby, Robert A., Kang, Minkyung and Unwin, Patrick R.. (2016) Characterization of nanopipettes. Analytical Chemistry . ISSN 0003-2700
Poon, Cheuk Ka, Tang, Owen, Chen, Xin-Ming, Pham, Binh T. T., Gody, Guillaume, Pollock, Carol A., Hawkett, Brian S. and Perrier, Sébastien. (2016) Preparation of inert polystyrene latex particles as microRNA delivery vectors by surfactant-free RAFT emulsion polymerization. Biomacromolecules, 17 (3). pp. 965-973. ISSN 1525-7797
Prasad, Aashish, Sotenko, Maria V., Blenkinsopp, Thomas J. and Coles, Stuart R.. (2016) Life cycle assessment of lignocellulosic biomass pretreatment methods in biofuel production. The International Journal of Life Cycle Assessment, 21 (1). pp. 44-50. ISSN 0948-3349
Rabbani, Naila, Ashour, Amal and Thornalley, Paul J.. (2016) Mass spectrometric determination of early and advanced glycation in biology. Glycoconjugates Journal, 33 (4). pp. 533-568. ISSN 0282-0080
Rajan, Ashwin T., Narasimham, G. S. V. L. and Jacob, Subhash. (2010) CFD analysis of high frequency miniature pulse tube refrigerators for space applications with thermal non-equilibrium model. Applied Thermal Engineering, 30 (2-3). pp. 152-166. ISSN 1359-4311
Rajan, Ashwin T. , Narasimham, G. S. V. L. and Jacob, Subhash. (2011) Oscillatory flow and temperature fields in an open tube with temperature difference across the ends. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3357-3368. ISSN 0017-9310
Riello, Giorgio. (2010) Asian knowledge and the development of calico printing in Europe in the seventeenth and eighteenth centuries. Journal of Global History, Vol.5 (No.1). pp. 1-28. ISSN 1740-0228
Risangud, Nuttapol , Congdon, Thomas R., Keddie, Daniel J., Wilson, Paul , Kempe, Kristian and Haddleton, David M.. (2016) Polyurea microcapsules from isocyanatoethyl methacrylate copolymers. Polymer Chemistry, 54 (17). pp. 2698-2705. ISSN 1759-9954
Santra, Sumita, Sinha, A. K., Ray, S. K., Ali, Syed Z., Udrea, Florin, Gardner, J. W. and Guha, Prasanta K.. (2014) Ambient temperature carbon nanotube ammonia sensor on CMOS platform. Procedia Engineering, Volume 87 . pp. 224-227. ISSN 1877-7058
. (2007) Complete genome sequence of the myxobacterium sorangium cellulosum. Nature Biotechnology, Volume 25 (Number 11). pp. 1281-1289. ISSN 1087-0156
Spooner, Stephen, Assis, Andre N., Warnett, Jason, Fruehan, Richard J., Williams, M. A. (Mark A.) and Sridhar, Seetharaman. (2016) Investigation into the cause of spontaneous emulsification of a free steel droplet : validation of the chemical exchange pathway. Metallurgical and Materials Transactions B, 47 (4). pp. 2123-2132. ISSN 1073-5615
Stegle, Oliver, Denby, Katherine J., Cooke, Emma J., Wild, David L., Ghahramani, Zoubin and Borgwardt, Karsten M.. (2010) A robust Bayesian two-sample test for detecting intervals of differential gene expression in microarray time series. Journal of Computational Biology , Volume 17 (Number 3). pp. 355-367. ISSN 1066-5277
Ta, V. D., Carter, R. M., Esenturk, Emre, Connaughton, Colm, Wasley, T. J., Li, J., Kay, R. W., Stringer, J., Smith, P. J. and Shephard, J. D.. (2016) Dynamically controlled deposition of colloidal nanoparticle suspension in evaporating drops using laser radiation. Soft Matter, 12 (20). pp. 4530-4536. ISSN 1744-683X
Tamainot-Telto, Zacharie. (2016) Novel method using Dubinin-Astakhov theory in sorption reactor design for refrigeration and heat pump applications. Applied Thermal Engineering . ISSN 1359-4311 (In Press)
Tamainot-Telto, Zacharie, Metcalf, Steven John and Critoph, Robert E.. (2009) Novel compact sorption generators for car air conditioning. International Journal of Refrigeration, Vol.32 (No.4 Sp. Iss.). pp. 727-733. ISSN 0140-7007
Tamainot-Telto, Zacharie, Metcalf, Steven John, Critoph, Robert E., Zhong, Y. and Thorpe, Roger. (2009) Carbon-ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping. International Journal of Refrigeration, Vol.32 (No.6). pp. 1212-1229. ISSN 0140-7007
Tian, Y. (Yuan), Zhao, Chang-Ying, Li, Zeng-Yao and Qu, Zhi-Guo. (2008) Flow and heat transfer in metal foam filled pipes under two extended Darcy models. Journal of Engineering Thermophysics, Vol.29 (No.8). pp. 1380-1382. ISSN 0253-231X
Truong, Nghia P., Quinn, John F., Anastasaki, Athina, Haddleton, David M., Whittaker, Michael R. and Davis, Thomas P.. (2016) Facile access to thermoresponsive filomicelles with tuneable cores. Chemical Communications, 52 (24). pp. 4497-4500. ISSN 1359-7345
Urasinska-Wojcik, Barbara, Vincent, Timothy A., Chowdhury, Mohamed F. and Gardner, J. W.. (2017) Ultrasensitive WO3 gas sensors for NO2 detection in air and low oxygen environment. Sensors and Actuators B: Chemical, 239 . pp. 1051-1059. ISSN 0925-4005
Walker, Marc, Tedder, Mike, Palmer, J. D., Mudd, James J. and McConville, C. F. (Chris F.). (2016) Low temperature removal of surface oxides and hydrocarbons from Ge(100) using atomic hydrogen. Applied Surface Science, 379 . pp. 1-7. ISSN 0169-4332
Wang, B. X., Bhagat, Rohit, Lan, X. Z. and Dashwood, R. J.. (2011) Production of Ni-35Ti-15Hf alloy via the FFC Cambridge process. Journal of The Electrochemical Society, Vol.158 (No.10). D595-D602. ISSN 0013-4651
Wang, C.J. and Wen, Jennifer X.. (2016) Numerical simulation of flame acceleration and deflagration-to-detonation transition in hydrogen-air mixtures with concentration gradients. International Journal of Hydrogen Energy . ISSN 0360-3199 (In Press)
Wang, L. W., Metcalf, Steven John, Critoph, Robert E., Thorpe, Roger and Tamainot-Telto, Zacharie. (2012) Development of thermal conductive consolidated activated carbon for adsorption refrigeration. Carbon, Vol.50 (No.3). pp. 977-986. ISSN 0008-6223
Wen, J. X. (Jennifer X.) , Le Fur, Pierre, Jie, Hongen and Vendra, C. Madhav Rao. (2016) Further development and validation of CO2FOAM for the atmospheric dispersion of accidental releases from carbon dioxide pipelines. International Journal of Greenhouse Gas Control, 52 . pp. 293-304. ISSN 1750-5836
Won, Sangho, Phillips, Daniel J., Walker, Marc and Gibson, Matthew I.. (2016) Co-operative transitions of responsive-polymer coated gold nanoparticles ; precision tuning and direct evidence for co-operative aggregation. Journal of Materials Chemistry B, 4 (34). pp. 5673-5682. ISSN 2050-750X
Wright, Daniel B., Patterson, Joseph P., Pitto-Barry, Anaïs, Lu, Annhelen, Kirby, Nigel, Gianneschi, Nathan C., Chassenieux, Christophe, Colombani, Olivier and O’Reilly, Rachel K.. (2015) The Copolymer blending method : a new approach for targeted assembly of micellar nanoparticles. Macromolecules, 48 (18). pp. 6516-6522. ISSN 0024-9297
Wu, C., Bai, Y. and Mottram, J. T.. (2016) Effect of elevated temperatures on the mechanical performance of pultruded FRP joints with a Single Ordinary or Blind Bolt. Journal of Composites for Construction, 20 (2). 04015045. ISSN 1090-0268
Yordanov, Boyan, Kim, Jongmin, Petersen, Rasmus, Shudy, Angelina, Kulkarni, Vishwesh V. and Phillips, Andrew. (2014) Computational design of nucleic acid feedback control circuits. ACS Synthetic Biology, 3 (8). pp. 600-616. ISSN 2161-5063
Zafari, Behrouz and Mottram, J. T.. (2015) Characterization by full-size testing of pultruded frame joints for the Startlink house. Journal of Composites in Construction , 19 (1). pp. 1-9. ISSN 1090-0268
Zhang, Guohui, Tan, Sze-yin, Patel, Anisha N. and Unwin, Patrick R.. (2016) Electrochemistry of Fe3+/2+ at highly oriented pyrolytic graphite (HOPG) electrodes : kinetics, identification of major electroactive sites and time effects on the response. Physical Chemistry Chemical Physics, 18 . pp. 32387-32395. ISSN 1463-9076
Zhong, Y., Critoph, Robert E., Thorpe, Roger and Tamainot-Telto, Zacharie. (2009) Dynamics of BaCl2-NH3 adsorption pair. Applied Thermal Engineering, Vol.29 (No.5-6). pp. 1180-1186. ISSN 1359-4311
Zhuang, Qian D., Anyebe, Ezekiel A., Sanchez, Ana M., Rajpalke, Mohana K., Veal, T. D. (Tim D.), Zhukov, Alexander, Robinson, Benjamin J., Anderson, Frazer, Kolosov, Oleg and Fal’ko, Vladimir. (2014) Graphitic platform for self-catalysed InAs nanowires growth by molecular beam epitaxy. Nanoscale Research Letters, Volume 9 (Number 1). Article number 321. ISSN 1556-276X
Atkinson, I., Teoreanu, Ion, Mocioiu, O. C., Smith, Mark E. and Zaharescu, M. (2010) Structure property relations in multicomponent oxide systems with additions of TiO2 and ZrO2 for glaze applications. In: 12th International Conference on the Physics of Non-Crystalline Solids (PNCS12), Foz do Iguacu, Brazil, 06-09 Sep 2009. Published in: Journal of Non-Crystalline Solids, Vol.356 (No.44-49 Sp. Iss. SI). pp. 2437-2443.
Bassiri, Riccardo, Hart, Martin, Byer, Robert L., Borisenko, Konstantin B., Evans, Keith, Fejer, Martin M., Lin, Angie C., MacLaren, Ian, Markosyan, Ashot S., Martin, Iain W., Route, Roger K. and Rowan, Sheila (2014) Investigating the medium range order in amorphous Ta2O5 coatings. In: Electron Microscopy and Analysis Group Conference 2013 (EMAG2013), University of York, York, UK, 3-6 September 2013. Published in: Journal of Physics: Conference Series, Volume 522
Gupta, Aniruddha, Ascroft, Helen and Barnes, Stuart (2016) Effect of chisel edge in ultrasonic assisted drilling of carbon fibre reinforced plastics (CFRP). In: 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, Germany, 31 May - 2 Jun 2016. Published in: Procedia CIRP, 46 pp. 619-622.
Han, Xiaoxiao, Tian, Y. (Yuan) and Zhao, Chang-Ying (2012) A phase field model for heat transfer in a metal foam-embedded latent thermal energy storage (LTES) system. In: 8th International Symposium on Heat Transfer, Beijing, China, 21-24 Oct 2012. Published in: Proceedings of the 8th International Symposium on Heat Transfer
Tamainot-Telto, Zacharie (2016) New approach in adsorption reactor design for refrigeration and heat pump applications. In: Qatar Foundation Annual Research Conference (ARC'16), Qatar , 22-23 Mar 2016 (2795). (Unpublished)
Tamainot-Telto, Zacharie (2016) Towards optimum specifications of adsorbent for heat pump and refrigeration applications. In: Heat Powered Cycles Conference 2016, Nottingham , 26-29 Jun 2016. Published in: Heat Powered Cycles Conference 2016 Extended Abstracts (HPC760). pp. 129-130.
Tian, Y. (Yuan) and Zhao, Chang-Ying (2011) Using porous metals to enhance heat transfer in phase change materials (PCMs). In: 2011 Chinese Society of Engineering Thermophysics Heat and Mass Transfer Conference : 2011年中国工程热物理学会传热传质学术会议, Xi’an, China, 14-17th Oct 2011. Published in: Proceedings of the 2011 Chinese Society of Engineering Thermophysics Heat and Mass Transfer Conference pp. 208-212.
Zhou, Zuoxin, Salaoru, Iulia, Morris, Peter and Gibbons, Gregory John (2016) Development of a direct feed fused deposition modelling technology for multi-material manufacturing. In: 19th International Conference on Material Forming – ESAFORM 2016, Nantes, France, 26-29 Apr 2016. Published in: ESAFORM 2016 : Proceedings of the 19th international ESAFORM conference on material forming 190004 .
Submitted Journal Article
Chapman, Lloyd A. C., Whiteley, Jonathan P., Byrne, Helen M., Waters, Sarah L. and Shipley, Rebecca J. (2017) Mathematical modelling of cell layer growth in a hollow fibre bioreactor. Journal of Theoretical Biologyy, 418 . pp. 36-56. ISSN 0022-5193
Thesis or Dissertation
Al-Khalifa, Sherzad (2000) Identification of a binary gas mixture from a single resistive microsensor. PhD thesis, University of Warwick.
Bishop, Andrew C. (2015) Surfactant entrapment in the wake behind an oil droplet rising in an aqueous medium. PhD thesis, University of Warwick.
Brzeski, Ian (2009) Gas-assisted compression moulding of glass reinforced polypropylene. PhD thesis, University of Warwick.
Cann, Bradley Lyall (2009) Magnetic resonance studies of point defects in diamond. PhD thesis, University of Warwick.
Chan, Wai Man Ivan (2012) Intelligent conceptual mould layout design system (ICMLDS) : innovation report. EngD thesis, University of Warwick.
Chan, Wai Sang Samuel (2000) An energy efficient approach for radon management in a HVAC environment: executive summary. EngD thesis, University of Warwick.
Che Harun, Fauzan Khairi (2009) Mimicking the human olfactory system: a portable e-mucosa. PhD thesis, University of Warwick.
Chen, Jay-San (2000) Standardisation of flexure testing of engineering ceramics. PhD thesis, University of Warwick.
Coulton, Jerome Philip Jack (1996) Effect of elevated strain rates on the mechanical performance of polyethylene structures. PhD thesis, University of Warwick.
Craven, Mark Antony (1997) Bacteria classification with an electronic nose employing artificial neural networks. PhD thesis, University of Warwick.
Cruddace, Robin (2007) Magnetic resonance and optical studies of point defects in single crystal CVD diamond. PhD thesis, University of Warwick.
Deller, Robert C. (2013) The investigation and application of ice recrystallization inhibitors as cryoprotectants. PhD thesis, University of Warwick.
Diamond, Geoffrey Graham (2001) Organically templated inorganic membranes for gas separation. PhD thesis, University of Warwick.
Dunn, Iain, (Researcher in physics) (2012) Crystallography of new materials for clean energy production and the switch to a hydrogen based economy. PhD thesis, University of Warwick.
Edmonds, Andrew Mark (2008) Magnetic resonance studies of point defects in single crystal diamond. PhD thesis, University of Warwick.
Farahi, Elham (2008) Advanced calcareous ceramics via novel green processing and super-critical carbonation. PhD thesis, University of Warwick.
Gammon, P. M. (2011) Development of SiC heterojunction power devices. PhD thesis, University of Warwick.
Glover, Claire (2003) A study of defects in single crystal CVD diamond. PhD thesis, University of Warwick.
Hancox, Ian (2013) Utilising high work function metal oxides as hole extracting layers for organic photovoltaic cells. PhD thesis, University of Warwick.
Harvey, Adam Benedict (1990) Study of an intermittent regenerative cycle for solar cooling. PhD thesis, University of Warwick.
Hoong, Seng Soi (2013) Synthesis of oligomers/polymers from plant oil derivatives. PhD thesis, University of Warwick.
Jackson, Julia Emma (2007) The development of methods for the selective capture and characterisation of fragrances and flavours from nature. PhD thesis, University of Warwick.
Jones, R. W. (1977) The development and properties of glass-ceramic fibres. PhD thesis, University of Warwick.
Jones, Simon Benedict (2001) The development of innovative products and manufacturing processes utilising fire resistant materials : executive summary. EngD thesis, University of Warwick.
Kemp, Thomas F. (2008) Solid state NMR studies of inorganic pigment materials and catalysts. PhD thesis, University of Warwick.
Khawaja, Jaleed Ejaz (2009) Asic gas sensors based on ratiometric principles. PhD thesis, University of Warwick.
Kiatmanaroj, Subongkoj (2004) Sandwich injection moulding with thermoset materials. PhD thesis, University of Warwick.
Lee, Siu Man (2002) Low-power silicon planar micro-calorimeter employing nanostructured catalyst. PhD thesis, University of Warwick.
Loponov, Konstantin Nikolayevich (2011) Development of a scalable photochemical reactor for syntheses of fine chemicals. PhD thesis, University of Warwick.
Mahmoudi, Shiva (2011) The circulating fluidized bed (CFB) combustion of biomass and the control of gaseous emissions. PhD thesis, University of Warwick.
Makenji, Kylash (2011) Digital decoration of polymers : innovations in the dye sublimation process. EngD thesis, University of Warwick.
Middleton, Bethany (2012) Injection moulding electroluminescent devices. PhD thesis, University of Warwick.
Mumford, Peter Marten (2009) New reactions of 2-methyleneaziridines. PhD thesis, University of Warwick.
Nurika, Irnia (2013) Mechanisms of lignocellulosic conversion by the brown rot fungus serpula lacrymans. PhD thesis, University of Warwick.
Peremezhney, Nicolai (2013) Chemical product/process design and optimization : development of novel techniques and integration of bio-feedstocks. PhD thesis, University of Warwick.
Pike, Andrew Charles (1996) Design of chemoresistive silicon sensors for application in gas monitoring. PhD thesis, University of Warwick.
Rivero Pacho, Ángeles María (2014) Thermodynamic and heat transfer analysis of a carbon – ammonia adsorption heat pump. PhD thesis, University of Warwick.
Ross, Andrew Henry (2015) New materials from renewable sources in the development of a non-stick coating for bakeware. PhD thesis, University of Warwick.
Rungseesantivanon, Wuttipong (2000) Factors affecting adhesion of polymers during coinjection. PhD thesis, University of Warwick.
Sturgeon, Andrew John (1987) Glass-ceramic coatings for metals. PhD thesis, University of Warwick.
Tan, Su-Lim (2005) Smart chemical sensing microsystem : towards a nose-on-a-chip. PhD thesis, University of Warwick.
Taylor, J. E. (James E.) (2010) Novel convolution-based processing techniques for application in chemical sensing. PhD thesis, University of Warwick.
Thorpe, Roger (1996) Heat transfer by forced convection in beds of granular adsorbent material for solid sorption heat pumps. PhD thesis, University of Warwick.
Turner, Lynne Helen (1992) Improvement of activated charcoal-ammonia adsorption heat pumping/refrigeration cycles : investigation of porosity and heat/mass transfer chacteristics. PhD thesis, University of Warwick.
Woodcock, Deborah L. (2012) Plant oil derived monomers for use in materials. PhD thesis, University of Warwick.
Zhang, Yuning (Researcher in engineering) (2012) Analysis of radial oscillations of gas bubbles in Newtonian or viscoelastic mediums under acoustic excitation. PhD thesis, University of Warwick.
Zhong, Y. (2006) Studies on equilibrium and dynamic characteristics of new adsorption pairs. PhD thesis, University of Warwick.