Thesis or Dissertation

Lin, Tzu-Yung (2012) Advanced electronics for fourier-transform ion cyclotron resonance mass spectrometry. PhD thesis, University of Warwick.

Duque Daza, Carlos Alberto (2012) Low order modelling of flow-control techniques for turbulent skin-friction reduction. PhD thesis, University of Warwick.

Jones, Christopher W. (Christopher Weir), 1982- (2012) Development and characterisation of traceable force measurement for nanotechnology. PhD thesis, University of Warwick.

Huang, Hui, (Researcher in engineering) (2012) Lifetime prediction for power converters. PhD thesis, University of Warwick.

Asante, Michael (2012) Numerical modeling of nosocomial infection in a multi-bed ward environment. PhD thesis, University of Warwick.

Jones, Rhys Gareth (2012) The mathematical modelling of gearbox vibration under applied lateral misalignment. PhD thesis, University of Warwick.

Purssell, C. P. (2012) Materials and methods for microstereolithography. PhD thesis, University of Warwick.

Elam, Dana (2012) A direct numerical simulation of dielectric barrier discharge (DBD) plasma actuators for turbulent skin-friction control. PhD thesis, University of Warwick.

Zhang, Fu (2012) Intelligent feature selection for neural regression : techniques and applications. PhD thesis, University of Warwick.

Huang, Peng, Ph.D. (2012) Optical wireless data transfer for rotor detection and diagnostics. PhD thesis, University of Warwick.

Chandler, I. D. (2012) Vertical variation in diffusion coefficient within sediments. PhD thesis, University of Warwick.

Butcher, Kent (2012) Concurrent engineering approach to complete non-linear FEA of an aircraft wheel's lock-ring. PhD thesis, University of Warwick.

Chan, Wai Man Ivan (2012) Intelligent conceptual mould layout design system (ICMLDS) : innovation report. EngD thesis, University of Warwick.

Kusetoğulları, Hüseyin (2012) Network routing optimisation and effective multimedia transmission to enhance QoS in communication networks. PhD thesis, University of Warwick.

Talha, Tariq (2012) A numerical investigation of three-dimensional unsteady turbulent channel flow subjected to temporal acceleration. PhD thesis, University of Warwick.

Talib, Marina (2012) Fabrication and characterisation of 3 dimensional scaffold for tissue engineering application via microstereolithography technique. PhD thesis, University of Warwick.

Zakaria, Rami (2011) Jet fuel spray characterisation using optical methods: an experimental study of high speed fuel injection systems in small rotary engines. PhD thesis, University of Warwick.

Xu, Dun (2011) Mechanical characterisation of micro-stereolithographic materials. PhD thesis, University of Warwick.

Harvey, Carlo (2011) Modality based perception for selective rendering. PhD thesis, University of Warwick.

Wang, Shuyi (2011) Optimization of transmitted-reference receivers in the ultra-wide bandwidth system. PhD thesis, University of Warwick.

Charlesworth, Chris, Eng.D. (2011) Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots. EngD thesis, University of Warwick.

Mahmoudi, Shiva (2011) The circulating fluidized bed (CFB) combustion of biomass and the control of gaseous emissions. PhD thesis, University of Warwick.

Gregorio, S. O. (Sandy O.) (2011) Investigation on the dynamics of gravity-driven coastal currents. PhD thesis, University of Warwick.

Saleem, Aamer (2011) NIR spectroscopy for personal screening. PhD thesis, University of Warwick.

Leong, Kennith Kin (2011) Utilising power devices below 100 K to achieve ultra-low power losses. PhD thesis, University of Warwick.

Hulusić, Vedad (2011) Auditory-visual interaction in computer graphics. PhD thesis, University of Warwick.

Gammon, P. M. (2011) Development of SiC heterojunction power devices. PhD thesis, University of Warwick.

Chin, Sze Vone (2011) Structural identifiability and indistinguishability analyses of glucose-insulin models. PhD thesis, University of Warwick.

Vlaskamp, Jozef H. A. (2011) An experimental and numerical investigation into the vertical dependence of Taylor-columns generated by a rotating disc. PhD thesis, University of Warwick.

Alsoufi, Mohammad S. (2011) A high dynamic response micro-tribometer measuring-head. PhD thesis, University of Warwick.

Kopera, Michal Andrzej (2011) Direct numerical simulation of turbulent flow over a backward-facing step. PhD thesis, University of Warwick.

Zhao, Bo, 1980- (2011) Spectrum efficiency improvement techniques for wireless communications. PhD thesis, University of Warwick.

He, Peinan (2011) A new design of devices and links configuration for indoor optical wireless communications. PhD thesis, University of Warwick.

Yin, Xiaokang (2011) Capacitive imaging technique for non-destructive evaluation (NDE). PhD thesis, University of Warwick.

Loponov, Konstantin Nikolayevich (2011) Development of a scalable photochemical reactor for syntheses of fine chemicals. PhD thesis, University of Warwick.

Tiev, Visoth (2011) Vegetation and discharge effects on the hydraulic residence time distribution within a natural pond. PhD thesis, University of Warwick.

Si, Chen (2011) The quantitative analysis of optical phase measurement and its application to the determination of corneal birefringence. PhD thesis, University of Warwick.

Atari, M. I. (Mohammed Isam) (2011) Mathematical models characterising the kinetics and dynamics of topotecan to account for drug resistance mechanisms. PhD thesis, University of Warwick.

Çelik, Turgay (2011) A multiresolution framework for computer vision-based autonomous navigation. PhD thesis, University of Warwick.

Bashford-Rogers, Thomas (2011) Accelerating global illumination for physically-based rendering. PhD thesis, University of Warwick.

Happa, Jassim (2011) High-fidelity rendering and display of cultural heritage. PhD thesis, University of Warwick.

Sun, Shaobo (2010) Applications of spectrum slicing in optical access networks. PhD thesis, University of Warwick.

Li, XuQin (2010) Data mining using intelligent systems : an optimized weighted fuzzy decision tree approach. PhD thesis, University of Warwick.

Bavelis, Konstantinos (2010) Finite-element time-domain modelling of cylindrical structures with a modal non-reflecting boundary condition. PhD thesis, University of Warwick.

Sloper, John Erik (2010) Error management in ATLAS TDAQ : an intelligent systems approach. PhD thesis, University of Warwick.

Sotenko, Maria V. (2010) Bicatalytic conversion of glycerol to value-added products. PhD thesis, University of Warwick.

Aggarwal, Vibhor (2010) High-fidelity rendering on shared computational resources. PhD thesis, University of Warwick.

Swan, I. R. (Ian R.) (2010) 3-D thermal modelling of power device packaging. PhD thesis, University of Warwick.

Palma-Mendoza, Jaime Alberto (2010) Business process redesign to support the adoption of e-business for the improvement of supply chain management : innovation report. EngD thesis, University of Warwick.

Roberts, Graham John (2010) Evaluation of emerging unipolar devices in the motor drive of a hybrid electric vehicle. PhD thesis, University of Warwick.

Chapman, James D. (2010) Mathematical modelling of epidemic systems influenced by maternal antibodies and public health intervention. PhD thesis, University of Warwick.

Jaffer, Sadiq (2010) Noise adaptive particle filtering for mobile robot applications. PhD thesis, University of Warwick.

Taylor, J. E. (James E.) (2010) Novel convolution-based processing techniques for application in chemical sensing. PhD thesis, University of Warwick.

Hunter, David J., 1982- (2010) Volumetric flow prediction using multiple plane particle image velocimetry. PhD thesis, University of Warwick.

Cheng, Sheng, 1979- (2010) Novel implementation technique for a wavelet-based broadband signal detection system. PhD thesis, University of Warwick.

Yue, Zhaoyang (2010) Systematic study of touch-feel perception : surface affective engineering aspects. PhD thesis, University of Warwick.

Kwon, Remi Jounghuem (2010) Anxiety activating virtual environments for investigating social phobias. PhD thesis, University of Warwick.

Yang, Jianhua (2010) Intelligent data mining using artificial neural networks and genetic algorithms : techniques and applications. PhD thesis, University of Warwick.

Zeng, Yu, 1978- (2010) Adaptive modulation schemes for optical wireless communication systems. PhD thesis, University of Warwick.

Brend, Mark, 1981- (2010) Traversing SPIV for the measurement of vortex rings under background rotation. PhD thesis, University of Warwick.

Claus, Daniel (2010) Resolution improvement methods applied to digital holography. PhD thesis, University of Warwick.

Yaakub, Sabariah (2009) E-commerce developments and impacts : a case of Malaysian maritime third party logistics service provider companies. PhD thesis, University of Warwick.

King, Philip Huw (2009) Towards rapid 3D direct manufacture of biomechanical microstructures. PhD thesis, University of Warwick.

Finney, James (2009) Autocoding methods for networked embedded systems. EngD thesis, University of Warwick.

Hattersley, J. G. (John G.) (2009) Mathematical modelling of immune condition dynamics : a clinical perspective. PhD thesis, University of Warwick.

Li, C. (Chuan) (2009) Short-range ultrasonic communications in air using capacitive transducers. PhD thesis, University of Warwick.

Raj, Alex Noel Joseph (2009) Accurate depth from defocus estimation with video-rate implementation. PhD thesis, University of Warwick.

Waters, Matthew, 1980- (2009) Application of software engineering tools and techniques to PLC programming : innovation report. EngD thesis, University of Warwick.

Poxon, John E. W. (2009) Development and use of a hybrid electric vehicle (HEV) model for interactive customer assessment of sound quality : innovation report. EngD thesis, University of Warwick.

Singh, Harsimrat (2009) Development of EEG based BCI approaches for detection of awareness in human disorders of consciousness. PhD thesis, University of Warwick.

Hickman, Richard James (2009) Generic integrated framework for improving inter-firm relationships : executive summary. EngD thesis, University of Warwick.

Che Harun, Fauzan Khairi (2009) Mimicking the human olfactory system: a portable e-­mucosa. PhD thesis, University of Warwick.

Li, Zheng (2009) Spur gear teeth contact analysis on power-train transmission noise, vibration and harshness. PhD thesis, University of Warwick.

Wu, Yupeng (2009) Thermal management of concentrator photovoltaics. PhD thesis, University of Warwick.

Guo, Yue, 1983- (2009) An investigation of model-based techniques for automotive electronic system development. PhD thesis, University of Warwick.

Elliott, Novak Samuel Jon (2009) Mathematical modelling and analysis of cerebrospinal mechanics: an investigation into the parthogenesis of syringomyelia. PhD thesis, University of Warwick.

Brzeski, Ian (2009) Gas-assisted compression moulding of glass reinforced polypropylene. PhD thesis, University of Warwick.

Rowley, James Henry (2009) Developing flexible automation for mushroom harvesting (Agaricus bisporus) : innovation report. EngD thesis, University of Warwick.

Higgins, Matthew D. (2009) Genetic algorithm optimisation methods applied to the indoor optical wireless communications channel. PhD thesis, University of Warwick.

Li, Na, Ph.D. (2009) Intelligent transmitter/receiver to locate infrared user in environment. PhD thesis, University of Warwick.

Oliver, John Douglas (2009) Autonomous surveillance in an urban environment. PhD thesis, University of Warwick.

Kintingu, Simion Hosea (2009) Design of interlocking bricks for enhanced wall construction, flexibility, alignment accuracy and load bearing. PhD thesis, University of Warwick.

Chung, Roy Chi Ping (2009) An econometric model for manufacturing strategy formulation and competitiveness in China : innovation report. EngD thesis, University of Warwick.

Khawaja, Jaleed Ejaz (2009) Asic gas sensors based on ratiometric principles. PhD thesis, University of Warwick.

Metcalf, Steven John (2009) Compact, efficient carbon-ammonia adsorption heat pump. PhD thesis, University of Warwick.

Nawasra, Jawad (2009) Novel techniques for high-speed time-resolved photoelestic stress analysis and its application to compressor blade design. PhD thesis, University of Warwick.

Arnab, Sylvester (2009) Soft volume simulation using a deformable surface model. PhD thesis, University of Warwick.

Petoussis, Andreas G. (2009) Supply function equilibrium analysis for electricity markets. PhD thesis, University of Warwick.

Meredith, James O. (2009) Biocomposites for bone tissue engineering : innovation report. EngD thesis, University of Warwick.

Martin, David G., 1960- (2009) High precision angle calibration for spherical measurement systems. PhD thesis, University of Warwick.

Giudice, Sebastiano D. (2009) Sound quality evaluations using interactive simulation : innovation report. EngD thesis, University of Warwick.

Farahi, Elham (2008) Advanced calcareous ceramics via novel green processing and super-critical carbonation. PhD thesis, University of Warwick.

Jones, Jeffrey Alun, 1962- (2008) Electronic reliability prediction: a study over 25 years. PhD thesis, University of Warwick.

Chong, Beatrice, 1981- (2008) Congestion management using FACTS controllers. PhD thesis, University of Warwick.

Shin, Dongjoe (2008) Robust surface modelling of visual hull from multiple silhouettes. PhD thesis, University of Warwick.

Verhaeghe, Ing G. (2008) Achieving aerospace standard porosity levels when welding thin and thick-section aluminium using fibre-delivered lasers : executive summary. EngD thesis, University of Warwick.

Vadivelu, Ramanan (2008) 'Fixclips': internal fixation system in paediatric orthopaedics. MD thesis, University of Warwick.

Suwatthikul, Jittiwut (2008) A framework and methods for on-board network level fault diagnostics in automobiles. PhD thesis, University of Warwick.

Leonte, Irina Ionela (2008) High frequency acousto-electric microsensors for liquid analysis. PhD thesis, University of Warwick.

Jewkes, James, 1978- (2008) An improved turbulent boundary layer inflow condition, applied to the simulation of jets in cross-flow. PhD thesis, University of Warwick.

McArdle, Elizabeth (2008) Online communities and their evaluation: creation of a method to assist Online Community Managers to evaluate the performance of their own communities: executive summary. EngD thesis, University of Warwick.

Kiran, Amit (2008) Jet noise : aeroacoustic distribution of a subsonic co-axial jet. PhD thesis, University of Warwick.

Al-Khouri, Ali Mohammed S. M. (2007) Strategic and large scale government IT projects management: innovation report. EngD thesis, University of Warwick.

Bradley, Robert John, 1979- (2007) Capacitive ultrasonic transducers fabricated using microstereolithography. PhD thesis, University of Warwick.

James-Gordon, Yvette (2007) A framework to facilitate effective e-learning in engineering development environments: executive summary. EngD thesis, University of Warwick.

Claxton, Christopher David, 1980- (2007) Colour depth-from-defocus incorporating experimental point spread function measurements. PhD thesis, University of Warwick.

Hamilton, Dean P. (2007) Novel dispersion representation of rectangular dielectric guides with application to leaky-wave antennas. PhD thesis, University of Warwick.

Still, Gwilym T. (2007) Methods for reducing the cost of cementitious building components in developing countries, with particular reference to rainwater harvesting. PhD thesis, University of Warwick.

Abdullah, Mohammad Faiz Liew (2006) Techniques for signal to noise ratio adaptation in infared optical wireless for optimisation of receiver performance. PhD thesis, University of Warwick.

Skeen, Andrew, 1980- (2006) The development of high-speed PIV techniques and their application to jet noise measurement. PhD thesis, University of Warwick.

Hajarnavis, Vivek (2006) An evaluation and comparison of PLC programming techniques : innovation report. EngD thesis, University of Warwick.

Zhong, Y. (2006) Studies on equilibrium and dynamic characteristics of new adsorption pairs. PhD thesis, University of Warwick.

Armoutis, Nikolaos (2006) Small-medium engineering enterprises and e-business: executive summary. EngD thesis, University of Warwick.

Pavlosoglou, Ioannis (2005) Emergence in the security of protocols for mobile ad-hoc networks. PhD thesis, University of Warwick.

Bañuelas, Ricardo (2005) Six Sigma vs. Design for Six Sigma: selection of the requisite Six Sigma approach using multi-criteria decision analysis: innovation report. EngD thesis, University of Warwick.

Xue, Lei, 1976- (2005) Internet connection method for mobile ad hoc wireless networks. PhD thesis, University of Warwick.

Folland, Ross Simon (2005) On the development of intelligent medical systems for pre-operative anaesthesia assessment. PhD thesis, University of Warwick.

Riggs, Ian (2004) Supplier selection using performance self assessment reporting in the automotive industry : executive summary. EngD thesis, University of Warwick.

Faulkner, Alastair (2004) Data integrity: an often-ignored aspect of safety systems: executive summary. EngD thesis, University of Warwick.

Van den Bergh, Dena (2004) The development of an integrated system for the management of pharmaceutical and surgical consumable products across a group of private hospitals : innovation report. EngD thesis, University of Warwick.

Berriman, James Robert Stockwell (2004) The application of air-coupled ultrasonic systems and signal processing to the interrogation of concrete. PhD thesis, University of Warwick.

Alsemgeest, Raimond W. (2004) The time-dependent flow through throttle valves: a computational and experimental investigation. PhD thesis, University of Warwick.

Kiatmanaroj, Subongkoj (2004) Sandwich injection moulding with thermoset materials. PhD thesis, University of Warwick.

Liu, Yan, Ph.D. (2004) Numerical simulations of unsteady complex geometry flows. PhD thesis, University of Warwick.

Dowidar, Helmy A. M. (2003) The geometrical interaction of the stylus and the measured surface in 3D roughness measurements. PhD thesis, University of Warwick.

Li, Gregg G. K. L. (2003) Governance systems for organisations: governance information control system design and development methodology for NGO boards: executive summary. PhD thesis, University of Warwick.

Sweet, Cameron (2003) Optical free space feedforward non-linearity correction system. PhD thesis, University of Warwick.

Mena, Carlos H., 1972- (2003) Complexity in organisations: a conceptual model: executive summary. PhD thesis, University of Warwick.

Stergiou, Theodore (2003) Protocol security for third generation telecommunication systems. PhD thesis, University of Warwick.

Jouvray, Alexandre (2003) Computation and measurements of flows in rooms. PhD thesis, University of Warwick.

Davies, Robin John (2003) Formulating competitive strategy in the UK housebuilding industry : executive summary. PhD thesis, University of Warwick.

Dunne, Gerard T. (2003) The introduction of a Sound Quality Engineering Process to Jaguar Cars : executive summary. PhD thesis, University of Warwick.

Hall, Wayne, 1974- (2003) Finite element modelling and simulation for a 'smart' tyre. PhD thesis, University of Warwick.

Neild, Adrian (2003) Ultrasonic air-coupled capacitive arrays. PhD thesis, University of Warwick.

Lee, Siu Man (2002) Low-power silicon planar micro-calorimeter employing nanostructured catalyst. PhD thesis, University of Warwick.

Howse, D. S. (2002) Improved productivity in fusion welding : executive summary. EngD thesis, University of Warwick.

Najjar, Ismail M. R. I. (2002) Investigation of contact of metrological probe tips with rough engineering surfaces. PhD thesis, University of Warwick.

Craig, David (2002) A model for customer-focused culture change in the speculative house-building industry : executive summary. PhD thesis, University of Warwick.

Kirwan, Kerry (2002) Alternative glazing for automotive vehicles: executive summary. EngD thesis, University of Warwick.

Hayes, Jonathan, 1966- (2002) Concurrent printing and thermographing for rapid manufacturing: executive summary. EngD thesis, University of Warwick.

Wilson, Trevor Stewart (2002) The research and development of in situ non-intrusive optical and temperature diagnostics in an internal combustion engine. PhD thesis, University of Warwick.

Montgomery, David Edward (2002) Dynamically-compacted cement stabilised soil blocks for low-cost walling. PhD thesis, University of Warwick.

King, Graham, Eng.D. (2002) Systems modelling and simulation in the product development process for automotive powertrains : executive summary. EngD thesis, University of Warwick.

Patterson, Fiona D. (2002) Project risk management and its application into the automotive manufacturing industry: executive summary. EngD thesis, University of Warwick.

Galanakis, Kostas (2002) The 'creative factory': an innovation systems model using a systems thinking approach. PhD thesis, University of Warwick.

Karim, Javid (2002) Development of a process driven approach to improving supply chain performance within the airline service industry: executive summary. PhD thesis, University of Warwick.

Goodship, Vannessa (2001) Interfacial instabilities: implications for multi-material moulding. PhD thesis, University of Warwick.

Ainscough, Matthew (2001) Integration of self assessment with a change management process for deploying concurrent engineering : executive summary. EngD thesis, University of Warwick.

Tebaldi, Enrico (2001) SIMAID: a rapid development methodology for the design of acyclic, bufferless, multi-process and mixed model agile production facilities for spaceframe vehicles. PhD thesis, University of Warwick.

Jones, Simon Benedict, 1971- (2001) The development of innovative products and manufacturing processes utilising fire resistant materials : executive summary. EngD thesis, University of Warwick.

Covington, James A., 1973- (2001) CMOS and SOI CMOS FET-based gas sensors. PhD thesis, University of Warwick.

Kirtay, Selçuk (2001) Interference analysis of broadband space and terrestrial fixed radio communications systems in the frequency range 12 to 30 GHz. PhD thesis, University of Warwick.

Whittaker, Lucy M. T. (2001) Modelling and analysis of current and concept vehicles for the purpose of enhancing vehicle handling: executive summary. EngD thesis, University of Warwick.

Brackley, Mark (2001) Acoustic noise from small electronically commutated motors. PhD thesis, University of Warwick.

Coleman, Julian Laurence, 1964- (2001) Determinants of supply chain structure. PhD thesis, University of Warwick.

Lockerby, Duncan (2001) Numerical simulation of boundary-layer control using MEMS actuation. PhD thesis, University of Warwick.

Saje, A. (2001) The design of organisations, products and processes for strategic flexibility : executive summary. EngD thesis, University of Warwick.

Rungseesantivanon, Wuttipong (2000) Factors affecting adhesion of polymers during coinjection. PhD thesis, University of Warwick.

Halliday, Ian, 1959- (2000) The development and use of strategic business performance improvement frameworks for rapid prototyping and tooling : executive summary. EngD thesis, University of Warwick.

Balbontin-Posadas, Alejandro (2000) CETGI : an assessment tool for global concurrent engineering : executive summary. EngD thesis, University of Warwick.

Arunachalam, Raghu (2000) An agent based compositional framework for supply chain simulation. PhD thesis, University of Warwick.

McKenzie, Robin, 1961- (2000) From lean supply and relationships to SME assessment : executive summary. EngD thesis, University of Warwick.

Burnett, Mark (2000) Optical instrumentation for fluid flow in gas turbines. PhD thesis, University of Warwick.

Chapman, Paul Anthony (2000) Time-based performance improvement: a methodology for the diagnosis of processes and design of performance improvement solutions: executive summary. EngD thesis, University of Warwick.

Wallace, Mark, 1974- (2000) The new flux switching motor : a DC motor without brushes. PhD thesis, University of Warwick.

Chan, Wai Sang Samuel (2000) An energy efficient approach for radon management in a HVAC environment: executive summary. EngD thesis, University of Warwick.

Fisher, Martin (2000) An experimental and numerical investigation into compact heat exchangers. PhD thesis, University of Warwick.

Barnes, Tina Angela (2000) A framework for the effective management of collaborative R&D projects : executive summary. EngD thesis, University of Warwick.

Gasser, Russell (2000) Technology for humanitarian landmine clearance. PhD thesis, University of Warwick.

Fu, Colin Leong Chee (1999) Power-control design of resonant converters. PhD thesis, University of Warwick.

Piggin, Richard Stuart Hadley (1999) Application and development of fieldbus : executive summary. EngD thesis, University of Warwick.

Chang, An-Yuan (1999) An attribute approach to the measurement of manufacturing system flexibility. PhD thesis, University of Warwick.

Burgess, Rachel (1999) The business process engineering of an aerospace aftermarket supply chain : executive summary. EngD thesis, University of Warwick.

Al-Meshaiei, Eisa Abdullah Eisa S. (1999) An expert system for material handling equipment selection. PhD thesis, University of Warwick.

Holmes, C. J. (1999) Re-engineering the new product introduction process : executive summary. EngD thesis, University of Warwick.

Jun, Yong-Tae (1999) A feature-based reverse engineering system using artificial neural networks. PhD thesis, University of Warwick.

Gretton, Jud Lorna (1999) Supporting sustainable change: executive summary. EngD thesis, University of Warwick.

Hill, Denys Alan (1999) A chaos related investigation into small manufacturing business financial decision-making dynamics. PhD thesis, University of Warwick.

Hoult, A. P. (1999) An experimental analysis of solid state pulsed laser melting of aluminium. PhD thesis, University of Warwick.

Jolliffe, Clifford Mark (1999) The design of hybrid stepping motors aided by three dimensional finite element analysis. PhD thesis, University of Warwick.

Smith, C. L. R. (1998) Development and deployment of document management technology into Rover : executive summary. EngD thesis, University of Warwick.

Allchurch, M. J. (1998) Development of a manufacturing engineering system for the motor industry : executive summary. EngD thesis, University of Warwick.

Gongora, Mario Augusto, 1964- (1998) Artificial intelligence tools for path generation and optimisation for mobile robots. PhD thesis, University of Warwick.

Thirupathi, Devi (1998) Integrated information model for managing the product introduction process. PhD thesis, University of Warwick.

Clarke, Angela, 1960- (1998) Improving the change management process : executive summary. EngD thesis, University of Warwick.

Ng Wai Kwan, Stephen (1998) Re-engineering the semiconductors business process to focus on Total Service Quality development through people in the Customer Responsiveness Center : executive summary. EngD thesis, University of Warwick.

Humphries, Michael Ralph, 1952- (1998) Management in engineering consultancies: with special reference to the Carl Bro Group and Peter Deer and Associates: executive summary. EngD thesis, University of Warwick.

Leverton, Timothy A. (1998) The use of concurrent engineering methodologies : achieving world class product development performance in the automobile industry : executive summary. EngD thesis, University of Warwick.

Lee, Sik-Fun (1998) The use of Chinese philosophies to assist achievement of world-class business excellence. PhD thesis, University of Warwick.

Petrovic, Dobrila (1997) Modelling and analysis of serial supply chains in uncertain environments. PhD thesis, University of Warwick.

Wilding, Richard David, 1965- (1997) An investigation into sources of uncertainity within industrial supply chains : amplification, deterministic chaos & parallel interactions. PhD thesis, University of Warwick.

Lo, Wai-Kwok (1997) Strategic change management toward agile manufacturing : a Hong Kong experience : executive summary. EngD thesis, University of Warwick.

Gregory, Ian C. (1997) The transfer of 'best practice' knowledge into manufacturing companies : executive summary. EngD thesis, University of Warwick.

Barbosa, Manuel Romano dos Santos Pinto (1997) Traffic management and control of automated guided vehicles using artificial neural networks. PhD thesis, University of Warwick.

Sandhu, Sukhbinder Singh (1997) Development of a standard framework for manufacturing simulators. PhD thesis, University of Warwick.

Huang, Kuo-En, 1946- (1997) Fuzzy control and its application to a pH process. PhD thesis, University of Warwick.

Craven, Mark Antony (1997) Bacteria classification with an electronic nose employing artificial neural networks. PhD thesis, University of Warwick.

Tahir, Mahmood Md., 1961- (1997) Structural and economic aspects of the use of semi-rigid joints in steel frames. PhD thesis, University of Warwick.

Lewis, Trevor Stephen, 1971- (1997) The form-finding of structures possessing a constant surface stress. PhD thesis, University of Warwick.

Lo, Victor H. Y. (1997) Implementing quality management in a Chinese based society : Hong Kong : executive summary. EngD thesis, University of Warwick.

Boateng, Douglas (1997) Re-configuring an international pharma-chemical customer services policy through the Delphi technique and process mapping : executive summary. EngD thesis, University of Warwick.

Yuan, Hui, 1965- (1996) The resistances of stud shear connectors with profiled sheeting. PhD thesis, University of Warwick.

Pardoe, Andrew Charles (1996) Neural network image reconstruction for nondestructive testing. PhD thesis, University of Warwick.

Huang, You Sen (1996) A control strategy for promoting shop-floor stability. PhD thesis, University of Warwick.

Thorpe, Roger (1996) Heat transfer by forced convection in beds of granular adsorbent material for solid sorption heat pumps. PhD thesis, University of Warwick.

Khan, Altaf Hamid, 1962- (1996) Feedforward neural networks with constrained weights. PhD thesis, University of Warwick.

Pike, Andrew Charles, 1970- (1996) Design of chemoresistive silicon sensors for application in gas monitoring. PhD thesis, University of Warwick.

Abdullah, Abu, 1960- (1996) Machining of aluminium based Metal Matrix Composite (MMC). PhD thesis, University of Warwick.

Mallick, Swapan (1996) Strategies for producing fast finite element solutions of the incompressible Navier-Stokes equations on massively parallel architectures. PhD thesis, University of Warwick.

Coulton, Jerome Philip Jack (1996) Effect of elevated strain rates on the mechanical performance of polyethylene structures. PhD thesis, University of Warwick.

Zhang, Zhige (1996) Accuracy studies on non-destructive metrology of small hole. PhD thesis, University of Warwick.

Gunn, Roger (1996) Mathematical modelling and identifiability applied to positron emission tomography data. PhD thesis, University of Warwick.

Cheung, Siu-Wing (1996) On the design and integration of education simulation games in engineering business management. PhD thesis, University of Warwick.

Pollock, Helen Geraldine Phyllis (1996) A series-parallel load-resonant converter for a controlled-current arc-welding power supply. PhD thesis, University of Warwick.

Yam, Richard Ching Man (1996) Strategic development of HK/China manufacturing industries. PhD thesis, University of Warwick.

Malburg, Mark C. (1996) A unified methodology for the application of surface metrology. PhD thesis, University of Warwick.

Brown, Nigel David, 1968- (1995) Aspects of sway frame design and ductility of composite end plate connections. PhD thesis, University of Warwick.

Cafolla, Janka (1995) Corrugated webs and lateral restraints in plate girders for bridges. PhD thesis, University of Warwick.

Pinfold, Martyn Keith, 1960- (1995) Composite mechanical properties for use in structural analysis. PhD thesis, University of Warwick.

Graysmith, J. L. (1995) Using CFD in engine design. PhD thesis, University of Warwick.

McCormack, Anthony Sean (1995) The design of periodic excitations for dynamic system identification. PhD thesis, University of Warwick.

Shirvani, Ayoub (1995) An investigation into the design for vibration damping of extended length tool holders. PhD thesis, University of Warwick.

Gooding, Dominic Edward Maxwell (1994) Improved processes for the production of soil-cement building blocks. PhD thesis, University of Warwick.

Kabecha, Wanjau Wa (1994) The quality of informal sector production : poor quality or quality for the poor. PhD thesis, University of Warwick.

Michaelides, Alexandros M. (1994) The design of switched reluctance motors for efficient energy conversion. PhD thesis, University of Warwick.

Baharin, Shamsuddin (1994) Knowledge-based automatic tolerance analysis system. PhD thesis, University of Warwick.

Fenton, Marcus Brian Mayhall (1994) Flow and heat transfer modelling of an automotive engine lubrication system. PhD thesis, University of Warwick.

Alatorre-Frenk, Claudio (1994) Cost minimisation in micro-hydro systems using pumps-as-turbines. PhD thesis, University of Warwick.

Huang, Dong-jie (1994) Composite beams : reliability and longitudinal shear resistance with profiled sheeting. PhD thesis, University of Warwick.

Miller, Jimmie Andrew, 1960- (1994) From STM to nanomemory: a transfer of technology feasibility study. PhD thesis, University of Warwick.

Cherry, Ann Susan, 1964- (1992) An investigation of multibody system modelling and control analysis techniques for the development of advanced suspension systems in passenger cars. PhD thesis, University of Warwick.

Turner, Lynne Helen, 1963- (1992) Improvement of activated charcoal-ammonia adsorption heat pumping/refrigeration cycles : investigation of porosity and heat/mass transfer chacteristics. PhD thesis, University of Warwick.

Chen, Shiming, 1957- (1992) Instability of composite beams in hogging bending. PhD thesis, University of Warwick.

Miller, Justin Dinsdale, 1949- (1991) Coupled microstrip and its application to broadband microwave structures. PhD thesis, University of Warwick.

Benterkia, Zoubir (1991) End-plate connections and analysis of semi-rigid steel frames. PhD thesis, University of Warwick.

Khamsehzadeh, Houshang (1991) Behaviour of ceramic cutting tools when machining superalloys. PhD thesis, University of Warwick.

Coy, Joanne (1991) The quantification of sampling error in coordinate measurement. PhD thesis, University of Warwick.

Poston, David (1990) The development of rural manufacturing industry in Central Africa: with special reference to metalworking. PhD thesis, University of Warwick.

Molenstra, Nadia Julia (1990) Ultimate strength of composite beams. PhD thesis, University of Warwick.

Harvey, Adam Benedict (1990) Study of an intermittent regenerative cycle for solar cooling. PhD thesis, University of Warwick.

Burrows, Bryan Godfrey (1989) Organisation and quality of falsework construction : a socio-economic study of the organisational structure of the construction industry with respect to the falsework production process and the quality of workmanship attained. PhD thesis, University of Warwick.

Kim, Yong-hwan, Ph.D. (1989) Behaviour of polymeric materials in machining. PhD thesis, University of Warwick.

Bishop, N. W. M. (1988) The use of frequency domain parameters to predict structural fatigue. PhD thesis, University of Warwick.

Rakels, Jan Henricus (1987) An in-process, non-contact surface finish sensor for high quality components generated using diamond turning. PhD thesis, University of Warwick.

Sturgeon, Andrew John, 1961- (1987) Glass-ceramic coatings for metals. PhD thesis, University of Warwick.

Smith, S. T. (Stuart T.), 1961- (1987) Mechanical systems in nanometre metrology. PhD thesis, University of Warwick.

Ganaba, Taher H. (1985) Nonlinear finite element analysis of plates and slabs. PhD thesis, University of Warwick.

Temple, Gordon John, 1952- (1985) Broad-band microwave amplifier design considerations. PhD thesis, University of Warwick.

Dirlik, Turan (1985) Application of computers in fatigue analysis. PhD thesis, University of Warwick.

Revell, Philip Scott, 1956- (1983) A sailwing vertical axis wind turbine for small scale applications. PhD thesis, University of Warwick.

Gonçalves, José Agostinho Basto, 1952- (1981) Nonlinear controllability and observability with applications to gradient systems. PhD thesis, University of Warwick.

Oehlers, Deric J. (1980) Stud shear connectors for composite beams. PhD thesis, University of Warwick.

Allison, Robert William, 1952- (1980) Cracking and tension field action in composite beams. PhD thesis, University of Warwick.

Kennedy, Leslie W., 1947- (1978) Large scale integrated (LSI) bipolar circuits : a study of integrated injection logic. PhD thesis, University of Warwick.

Kwesah, Ali Hadi, 1944- (1977) Characterization of integrated bipolar transistors using computer aided measurements and optimisation. PhD thesis, University of Warwick.

May, Ian Melville, 1946- (1976) Restrained composite columns. PhD thesis, University of Warwick.

Davall, P. W. (1975) Applications of statistics in the spectral analysis of time-varying systems. PhD thesis, University of Warwick.

Graham, Neil Anthony, 1947- (1974) Airborne noise reduction of agricultural tractor cabs. PhD thesis, University of Warwick.

Heath, Thomas V., 1948- (1974) Some properties of bolted joints. PhD thesis, University of Warwick.

Capaldi, Bernard, 1944- (1973) The theory and performance of A.C. axial flux machines. PhD thesis, University of Warwick.

Gill, John Martin, 1947- (1973) Design, production and evaluation of tactual maps for the blind. PhD thesis, University of Warwick.

Hussain, Sadiq Baker (1971) Cadmium sulphide transducers : thick vacuum-deposited films for ultrasonic shear-mode low-frequencey operation. PhD thesis, University of Warwick.

Monk, John, 1943- (1970) Application of digital computers to on-line optimisation. PhD thesis, University of Warwick.

Sydenham, P. H. (1969) Manual and automatice large-scale dimensional metrology. PhD thesis, University of Warwick.

Bevir, Michael Keith (1969) Induced voltage electromagnetic flowmeters. PhD thesis, University of Warwick.

Baxter, Anthony Christopher (1967) Electrochemical machining. PhD thesis, University of Warwick.