The Library
The correlation between bending, tensile and charpy impact properties of ultra-high-strength strip steels
Tools
Mandal, Abhisek, Barik, Rakesh Kumar, Bhattacharya, Ankita, Chakrabarti, Debalay and Davis, Claire (2023) The correlation between bending, tensile and charpy impact properties of ultra-high-strength strip steels. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 54 . pp. 3820-3843. doi:10.1007/s11661-023-07134-5 ISSN 1073-5623.
PDF
WRAP-correlation-between-bending-tensile-charpy-impact-properties-ultra-high-strength-strip-steels-Davis-2023.pdf - Accepted Version Embargoed item. Restricted access to Repository staff only until 18 July 2024. Contact author directly, specifying your specific needs. - Requires a PDF viewer. Download (2906Kb) |
Official URL: https://doi.org/10.1007/s11661-023-07134-5
Abstract
Two different ultra-high-strength B-containing steel strips, one treated with Ti and the other treated with Al, processed by controlled rolling, accelerated cooling, and coiling in two different temperatures ranges (450 °C to 460 °C and 360 °C to 380 °C) were subjected to tensile testing, bend testing, and Charpy impact testing. The relatively softer and homogeneous microstructure containing mostly granular bainite and upper bainite at the subsurface region (300 to 400 μm depth below the surface), with a low intensity of BCC shear texture components (e.g., {112}〈111〉), generated at the higher coiling temperatures (450 °C to 460 °C), is preferred for bendability (more resistant to shear cracking during bending) and also for the impact upper shelf energy (USE). The hard surface layer dominated by martensite developed at lower coiling temperatures (360 °C to 380 °C) promoted cleavage cracking and is therefore, undesired for bendability and impact toughness. The impact toughness at − 40 °C improved with the intensification of high angle boundaries, refinement of effective grain size, and the reduction of detrimental ‘rotated cube’ texture component. Finally, as the different properties are correlated, a decrease in yield strength, increase in ductility (particularly post-uniform elongation) and tensile toughness are found to be beneficial for bendability and USE. It can be concluded that a higher coiling temperature is preferred to achieve a softer bainitic microstructure if improved bendability and toughness are required rather than higher tensile strength.
Item Type: | Journal Article | ||||||||
---|---|---|---|---|---|---|---|---|---|
Subjects: | T Technology > TA Engineering (General). Civil engineering (General) T Technology > TN Mining engineering. Metallurgy |
||||||||
Divisions: | Faculty of Science, Engineering and Medicine > Engineering > WMG (Formerly the Warwick Manufacturing Group) | ||||||||
Library of Congress Subject Headings (LCSH): | Steel, High strength, Steel, High strength -- Mechanical properties, Steel, High strength -- Metallurgy | ||||||||
Journal or Publication Title: | Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science | ||||||||
Publisher: | Springer New York LLC | ||||||||
ISSN: | 1073-5623 | ||||||||
Official Date: | October 2023 | ||||||||
Dates: |
|
||||||||
Volume: | 54 | ||||||||
Page Range: | pp. 3820-3843 | ||||||||
DOI: | 10.1007/s11661-023-07134-5 | ||||||||
Status: | Peer Reviewed | ||||||||
Publication Status: | Published | ||||||||
Re-use Statement: | This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s11661-023-07134-5 | ||||||||
Access rights to Published version: | Restricted or Subscription Access | ||||||||
Date of first compliant deposit: | 19 July 2023 |
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |