The Library
Three dimensional finite element analysis of transverse free vibration of self-pierce riveting beam
Tools
He, Xiaocong, Pearson, Ian T. and Young, Ken (2007) Three dimensional finite element analysis of transverse free vibration of self-pierce riveting beam. Key Engineering Materials, Volume 344 . pp. 647-654. doi:10.4028/0-87849-437-5.647 ISSN 1013-9826.
Research output not available from this repository.
Request-a-Copy directly from author or use local Library Get it For Me service.
Official URL: http://dx.doi.org/10.4028/www.scientific.net/KEM.3...
Abstract
Self-pierce riveting (SPR) is nowadays widely used in the car manufacturing industry where aluminium alloys are used for body construction. For the design of mechanical structures, formed by the joining of component pails, a knowledge of the vibration characteristics of different joint types (adhesive bonding, spot welding, SPR etc) is essential. The free transverse vibration characteristics of single lap-jointed encastre SPR beams are investigated theoretically in this paper using the three dimensional finite element method (FEM). Numerical examples are provided to show the influence on the natural frequencies, natural frequency ratios and mode shapes of these beams caused by variations in the material properties (E and u) of the sheet material. It is shown that the transverse natural frequencies of single lap jointed encastre SPR beams increases significantly as the Young's modulus Of the sheets increases, but only slight changes are encountered for variations of Poisson's Ratio. It is found that an exponential curve gives an acceptable Fit to the relationship between natural frequency and Young's Modulus. As expected, odd modes shapes v,,ere found to be symmetrical about the mid-length position and even modes were anti-symmertrical.
Item Type: | Journal Article | ||||
---|---|---|---|---|---|
Subjects: | T Technology > TP Chemical technology T Technology > TA Engineering (General). Civil engineering (General) |
||||
Divisions: | Faculty of Science, Engineering and Medicine > Engineering > WMG (Formerly the Warwick Manufacturing Group) | ||||
Journal or Publication Title: | Key Engineering Materials | ||||
Publisher: | Trans Tech Publications Ltd | ||||
ISSN: | 1013-9826 | ||||
Editor: | Micari, F and Geiger, M and Duflou, J and Shirvani, B and Clarke, R and DiLorenzo, R and Fratini, L | ||||
Official Date: | July 2007 | ||||
Dates: |
|
||||
Volume: | Volume 344 | ||||
Number of Pages: | 8 | ||||
Page Range: | pp. 647-654 | ||||
DOI: | 10.4028/0-87849-437-5.647 | ||||
Status: | Peer Reviewed | ||||
Publication Status: | Published | ||||
Access rights to Published version: | Restricted or Subscription Access |
Data sourced from Thomson Reuters' Web of Knowledge
Request changes or add full text files to a record
Repository staff actions (login required)
View Item |