Glover, Peter Benedict Myers (1994) Computer simulation and analysis methods in the development of the hydraulic ram pump. PhD thesis, University of Warwick.

Preview	PDF WRAP_THESIS_Glover_1994.pdf - Submitted Version - Requires a PDF viewer. Download (45Mb) | Preview
	Other (Email permission) FW Digitisation of your PhD thesis.msg - Other Embargoed item. Restricted access to Repository staff only Download (75Kb)

Request Changes to record.

Abstract

The purpose of this study was primarily to promote the wider deployment of the hydraulic ram pump, and secondarily to provide the technical input into a programme aimed at using hydraulic ram pump technologies for third world development. Hitherto hydraulic ram pump technologies have been restricted by poor understanding of operational parameters, poor performance prediction, and poor design of pumps and installations.

In pursuit of greater understanding the work utilised a computer simulation developed by the author as part of a previous research programme. This simulation was then greatly enhanced to provide improved accuracy and functionality. The enhanced simulation was then used to provide significant insight into the operation of a hydraulic ram pump and subsequently used to identify design improvements for the hydraulic ram pump. The simulation was used to investigate operational restrictions on the hydraulic ram, and was ultimately use to develop a model of hydraulic ram pump operation.

The model of operation developed by the use of the simulation was computerised and used to predict the performance of hydraulic ram pump installations. This computerised model was then used to provide the most comprehensive design charts yet created for hydraulic ram pump, and was also used in the investigation of operational limits for the device.

The study represents: the development of the first detailed simulation of the hydraulic ram pump and the most significant insight to date into the detail of operation of a hydraulic ram pump. The result of the study is the provision of an accurate method of pump calibration, an accurate method of pump performance prediction, and the first comprehensive design charts to be produced for the hydraulic ram pump.

Item Type:	Thesis or Dissertation (PhD)
Subjects:	T Technology > TJ Mechanical engineering and machinery
Library of Congress Subject Headings (LCSH):	Hydraulic rams -- Testing
Official Date:	January 1994
Dates:	Date Event January 1994 Submitted
Institution:	University of Warwick
Theses Department:	School of Engineering
Thesis Type:	PhD
Publication Status:	Unpublished
Supervisor(s)/Advisor:	Boldy, A. P. (Adrian P.)
Extent:	x, 364 pages
Language:	eng

Request changes or add full text files to a record

Repository staff actions (login required)

View Item