The Library
Browse by Warwick Author
Up a level |
Jump to: Journal Article | Conference Item
Number of items: 41.
Journal Article
Zhao, Tao, Utili, Stefano and Crosta, Giovanni B. (2016) Rockslide and impulse wave modelling in the Vajont Reservoir by DEM-CFD analyses. Rock Mechanics and Rock Engineering, 49 (6). pp. 2437-2456. doi:10.1007/s00603-015-0731-0 ISSN 0723-2632.
Jiang, Mingjing, Shen, Zhifu and Utili, Stefano (2016) DEM modeling of cantilever retaining excavations : implications for lunar constructions. Engineering Computations, 33 (2). pp. 366-394. doi:10.1108/EC-06-2014-0140 ISSN 0264-4401.
Utili, Stefano and Abd, Akram Hasan (2016) On the stability of fissured slopes subject to seismic action. International Journal for Numerical and Analytical Methods in Geomechanics, 40 (5). pp. 785-806. doi:10.1002/nag.2498 ISSN 0363-9061.
Utili, Stefano (2015) Discussion of βLimit analysis of slopes with cracks : comparisons of resultsβ. Engineering Geology, 197 . pp. 306-307. doi:10.1016/j.enggeo.2015.05.002 ISSN 0013-7952.
Wang, H. N., Utili, Stefano, Jiang, Mingjing and He, P. (2015) Analytical solutions for tunnels of elliptical cross-section in rheological rock accounting for sequential excavation. Rock mechanics and rock engineering, 48 (5). pp. 1997-2029. doi:10.1007/s00603-014-0685-7 ISSN 0723-2632.
Jiang, Mingjing, Zhu, Fangyuan and Utili, Stefano (2015) Investigation into the effect of backpressure on the mechanical behavior of methane-hydrate-bearing sediments via DEM analyses. Computers and geotechnics, 69 . pp. 551-563. doi:10.1016/j.compgeo.2015.06.019 ISSN 0266-352X.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) A new rock slicing method based on linear programming. Computers and geotechnics, 65 . pp. 12-29. doi:10.1016/j.compgeo.2014.11.007 ISSN 0266-352X.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) Designing tunnel support in jointed rock masses via the DEM. Rock Mechanics and Rock Engineering, 48 (2). pp. 603-632. doi:10.1007/s00603-014-0579-8 ISSN 0723-2632.
Utili, Stefano, Castellanza, Riccardo, Galli, Andrea and Sentenac, Phillippe (2015) Novel approach for health monitoring of earthen embankments. Journal of Geotechnical and Geoenvironmental Engineering , 141 (3). 04014111. doi:10.1061/(ASCE)GT.1943-5606.0001215 ISSN 1090-0241.
Utili, Stefano, Zhao, Tao and Houlsby, G. T. (2015) 3D DEM investigation of granular column collapse : evaluation of debris motion and its destructive power. Engineering geology, 186 . pp. 3-16. doi:10.1016/j.enggeo.2014.08.018 ISSN 0013-7952.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2015) DEM modelling of a jointed rock beam with emphasis on interface properties. GΓ©otechnique Letters, 5 (1). pp. 49-55. doi:10.1680/geolett.14.00105 ISSN 2045-2543.
Murugaratnam, Kovthaman, Utili, Stefano and Petrinic, Nik (2015) A combined DEMβFEM numerical method for Shot Peening parameter optimisation. Advances in engineering software, 79 . pp. 13-26. doi:10.1016/j.advengsoft.2014.09.001 ISSN 0965-9978.
Jiang, Mingjing, Zhu, Fangyuan, Liu, Fang and Utili, Stefano (2014) A bond contact model for methane hydrate-bearing sediments with interparticle cementation. International Journal for Numerical and Analytical Methods in Geomechanics, 38 (17). pp. 1823-1854. doi:10.1002/nag.2283 ISSN 0363-9061.
Zhao, Tao, Houlsby, G. T. and Utili, Stefano (2014) Investigation of granular batch sedimentation via DEMβCFD coupling. Granular Matter, 16 (6). pp. 921-932. doi:10.1007/s10035-014-0534-0 ISSN 1434-5021.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2014) New insights into the 1963 Vajont slide using 2D and 3D distinct-element method analyses. Geotechnique, 64 (10). pp. 800-816. doi:10.1680/geot.14.P.041 ISSN 0016-8505.
Dattola, G., Di Prisco, Claudio, Redaelli, Irene and Utili, Stefano (2014) A distinct element method numerical investigation of compaction processes in highly porous cemented granular materials. International Journal for Numerical and Analytical Methods in Geomechanics, 38 (11). pp. 1101-1130. doi:10.1002/nag.2241 ISSN 0363-9061.
Utili, Stefano (2014) Discussion of βStability assessment of slopes with cracks using limit analysisβ. Canadian geotechnical journal, 51 (7). pp. 822-825. doi:10.1139/cgj-2014-0085 ISSN 1208-6010.
Wang, H. N., Utili, Stefano and Jiang, M. J. (2014) An analytical approach for the sequential excavation of axisymmetric lined tunnels in viscoelastic rock. International Journal of Rock Mechanics and Mining Sciences, 68 . pp. 85-106. doi:10.1016/j.ijrmms.2014.02.002 ISSN 1365-1609.
Crosta, Giovanni B., Utili, Stefano, De Blasio, Fabio Vittorio and Castellanza, Riccardo (2014) Reassessing rock mass properties and slope instability triggering conditions in Valles Marineris, Mars. Earth and Planetary Science Letters , Volume 388 . pp. 329-342. doi:10.1016/j.epsl.2013.11.053 ISSN 0012821X.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2013) A new contact detection algorithm for three-dimensional non-spherical particles. Powder technology, 248 . pp. 94-102. doi:10.1016/j.powtec.2012.12.040 ISSN 0032-5910.
Wang, H. N., Li, Y., Ni, Q., Utili, Stefano, Jiang, Mingjing and Liu, Fang (2013) Analytical solutions for the construction of deeply buried circular tunnels with two liners in rheological rock. Rock Mechanics and Rock Engineering, Volume 46 (Number 6). pp. 1481-1498. doi:10.1007/s00603-012-0362-7 ISSN 0723-2632.
Utili, Stefano (2013) Investigation by limit analysis on the stability of slopes with cracks. Geotechnique, Volume 63 (Number 2). pp. 140-154. doi:10.1680/geot.11.P.068 ISSN 0016-8505.
Jiang, Mingjing, Zhang, Wangcheng, Sun, Yugang and Utili, Stefano (2013) An investigation on loose cemented granular materials via DEM analyses. Granular Matter, Volume 15 (Number 1). pp. 65-84. doi:10.1007/s10035-012-0382-8 ISSN 1434-5021.
Boon, Chia Weng, Houlsby, G. T. and Utili, Stefano (2012) A new algorithm for contact detection between convex polygonal and polyhedral particles in the discrete element method. Computers and Geotechnics, Vol.44 . pp. 73-82. doi:10.1016/j.compgeo.2012.03.012 ISSN 0266-352X.
Utili, Stefano and Crosta, Giovanni B. (2011) Modeling the evolution of natural cliffs subject to weathering. 1, Limit analysis approach. Journal of Geophysical Research, Vol.116 (Number F1). Article: F01016. doi:10.1029/2009JF001557 ISSN 0148-0227.
Utili, Stefano and Crosta, Giovanni B. (2011) Modeling the evolution of natural cliffs subject to weathering. 2, Discrete element approach. Journal of Geophysical Research, Vol.116 (No.F1). Article: F01017. doi:10.1029/2009JF001559 ISSN 0148-0227.
Jiang, Mingjing, Yan, H. B., Zhu, Hehua and Utili, Stefano (2011) Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses. Computers and Geotechnics, Vol.38 (No.1). pp. 14-29. doi:10.1016/j.compgeo.2010.09.001 ISSN 0266-352X.
Dyer, M. (Mark), Utili, Stefano and Zielinski, M. (Marcin) (2009) Field survey of desiccation fissuring of flood embankments. Proceedings of the ICE - Water Management, Vol.162 (No.3). pp. 221-232. doi:10.1680/wama.2009.162.3.221 ISSN 1741-7589.
Yin, Zhen-yu, Huang, Hong-wei, Utili, Stefano and Hicher, Pierre-Yves (2009) Modeling rate-dependent behaviors of soft subsoil under embankment loads. Yantu Gongcheng Xuebao/Chinese Journal of Geotechnical Engineering, Vol.31 (No.1). pp. 109-117. ISSN 1000-4548.
Utili, Stefano and Nova, Roberto (2008) DEM analysis of bonded granular geomaterials. International Journal for Numerical and Analytical Methods in Geomechanics, Vol.32 (No.17). pp. 1997-2031. doi:10.1002/nag.728 ISSN 0363-9061.
Utili, Stefano, Yin, Zhen-yu and Jiang, Mingjing (2008) Influence of hydraulic uplift pressures on the stability of a gravity dam. Yanshi Lixue yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, Vol.27 (No.8). pp. 1554-1568. ISSN 1000-6915.
Utili, Stefano and Nova, Roberto (2007) On the optimal profile of a slope. Soils & Foundations, Vol.47 (No.4). pp. 717-729.
Conference Item
Macaro, G., Utili, Stefano and Martin, C. M. (2014) DEM analyses of pipe-soil interaction for offshore pipelines on sand. In: International Symposium on Geomechanics from Micro to Macro IS Cambridge , Cambridge, UK, 1-3 Sep 2014. Published in: Geomechanics from Micro to Macro pp. 595-600. ISBN 9781138027077. doi:10.1201/b17395-106
Di Prisco, Claudio, Rinaldi, G. and Utili, Stefano (2013) Numerical dem analyses under simple shear conditions : the steady state for granular matters under large strain rates. In: III International Conference on Particle-based Methods β Fundamentals and Applications PARTICLES 2013, Stuttgart, Germany, 18-20 Sep 2013. Published in: Proceedings of the 3rd International Conference on Particle-based Methods Fundamentals and Applications, Particles pp. 764-774.
Crosta, Giovanni B., Castellanza, Riccardo, De Blasio, Fabio Vittorio and Utili, Stefano (2012) Slope stability analysis for Valles Marineris, Mars: a numerical analysis of controlling conditions and failure types. In: European Geosciences Union General Assembly 2012, Vienna, Austria, Apr 22-27, 2012 (No.11667).
Murugaratnam, Kovthaman and Utili, Stefano (2011) Shot peening optimization using the discrete element method. In: 11th International Conference on Shot Peening, South Bend, IN, U.S.A., Sep 12-15, 2011. Published in: Proceedings of the 11th International Conference on Shot Peening pp. 135-140.
Utili, Stefano, Dyer, M. (Mark) and Zielinski, M. (Marcin) (2009) Failure mechanisms and ultimate resistance of earth flood embankment with attention to desiccation fissuring. In: Annual Conference of the Canadian Society for Civil Engineering 2008, Quebec City, Quebec, Canada, Jun 10-13, 2008. Published in: Proceedings of the Annual Conference of the Canadian Society for Civil Engineering 2008, Vol.4 pp. 2719-2727. ISSN ISBN: 9781605603964.
Utili, Stefano and Nova, Roberto (2008) A study of cliffs subject to degradation by DEM (PFC2D). In: First International FLAC/DEM Symposium on Numerical Modeling, Minneapolis, MN, U.S.A., Aug 25-27, 2008. Published in: Proceedings of the First International FLAC/DEM Symposium on Numerical Modeling
Utili, Stefano and Nova, Roberto (2008) Calibration of micromechanical parameters to reproduce a frictional cohesive continuum by the distinct element method. In: The 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG), Goa, India, Oct 1-6, 2008. Published in: Proceedings of the 12th International Conference of the International Association for Computer Methods and Advances in Geomechanics pp. 163-170.
Utili, Stefano, Dyer, M. (Mark), Redaelli, M. and Zielinski, M. (Marcin) (2008) Desiccation fissuring induced failure mechanisms for clay levees. In: 10th International Symposium on Landslides and Engineered Slopes, Xi'an, China, Jun 30 - Jul 4, 2008. Published in: Landslides and Engineered Slopes: From the Past to the Future - Proceedings of the 10th International Symposium on Landslides and Engineered Slopes, Vol.1-2 pp. 1309-1314. doi:10.1201/9780203885284-c175 ISSN ISBN: 978-0-415-41196-7.
Redaelli, M., Utili, Stefano and Dyer, M. (Mark) (2008) A proposal for a reliability rating system for fluvial flood defence embankments in the United Kingdom. In: 10th International Symposium on Landslides and Engineered Slopes, Xi'an, China, Jun 30 - Jul 4, 2008. Published in: Landslides and Engineered Slopes: From the Past to the Future - Proceedings of the 10th International Symposium on Landslides and Engineered Slopes, Vol.1-2 pp. 1965-1970. doi:10.1201/9780203885284-c273 ISSN ISBN: 978-0-415-41196-7.
This list was generated on Tue Apr 23 13:28:03 2024 BST.