The Library
Browse by Warwick Author
Up a level |
Jump to: Advantage West Midlands (AWM) | Biotechnology and Biological Sciences Research Council (Great Britain) (BBSRC) | Engineering and Physical Sciences Research Council (EPSRC) | European Regional Development Fund (ERDF) | Higher Education Funding Council for England (HEFCE) | Research Councils UK (RCUK) | Royal Society (Great Britain) | Seventh Framework Programme (European Commission) (FP7) | UK Research Centre in Nondestructive Evaluation (RCNDE)
Number of items: 17.
Advantage West Midlands (AWM)
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365 ISSN 1932-6203.
Cheneler, D., Bowen, J., Leigh, Simon J., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, Vol.111 (No.8). pp. 1214-1223. doi:10.1016/j.ultramic.2011.03.009 ISSN 0304-3991.
Leigh, Simon J., Purssell, C. P., Bowen, J., Hutchins, David A., Covington, James A. and Billson, Duncan R. (2011) A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin. Sensors and Actuators A: Physical, Vol.168 (No.1). pp. 66-71. doi:10.1016/j.sna.2011.03.058 ISSN 0924-4247.
Biotechnology and Biological Sciences Research Council (Great Britain) (BBSRC)
Barker, Ian A., Ablett, Matthew P., Gilbert, Hamish T. J., Leigh, Simon J., Covington, James A., Hoyland, Judith A., Richardson, Stephen M. and Dove, Andrew P. (2014) A microstereolithography resin based on thiol-ene chemistry : towards biocompatible 3D extracellular constructs for tissue engineering. Biomaterials Science, 2 (4). pp. 472-475. doi:10.1039/C3BM60290G ISSN 2047-4830.
Engineering and Physical Sciences Research Council (EPSRC)
Woodward, David I., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Leigh, Simon J. (2015) Additively-manufactured piezoelectric devices. Physica Status Solidi (a), 212 (10). pp. 2107-2113. doi:10.1002/pssa.201532272 ISSN 0031-8965.
Barker, Ian A., Ablett, Matthew P., Gilbert, Hamish T. J., Leigh, Simon J., Covington, James A., Hoyland, Judith A., Richardson, Stephen M. and Dove, Andrew P. (2014) A microstereolithography resin based on thiol-ene chemistry : towards biocompatible 3D extracellular constructs for tissue engineering. Biomaterials Science, 2 (4). pp. 472-475. doi:10.1039/C3BM60290G ISSN 2047-4830.
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365 ISSN 1932-6203.
Leigh, Simon J., Purssell, C. P., Bowen, J., Hutchins, David A., Covington, James A. and Billson, Duncan R. (2011) A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin. Sensors and Actuators A: Physical, Vol.168 (No.1). pp. 66-71. doi:10.1016/j.sna.2011.03.058 ISSN 0924-4247.
European Regional Development Fund (ERDF)
Leigh, Simon J., Bradley, Robert J., Purssell, C. P., Billson, Duncan R. and Hutchins, David A. (2012) A simple, low-cost conductive composite material for 3D printing of electronic sensors. PLoS One, Vol.7 (No.11). e49365. doi:10.1371/journal.pone.0049365 ISSN 1932-6203.
Cheneler, D., Bowen, J., Leigh, Simon J., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Ward, M. C. L. (2011) Fabrication and analysis of cylindrical resin AFM microcantilevers. Ultramicroscopy, Vol.111 (No.8). pp. 1214-1223. doi:10.1016/j.ultramic.2011.03.009 ISSN 0304-3991.
Leigh, Simon J., Purssell, C. P., Bowen, J., Hutchins, David A., Covington, James A. and Billson, Duncan R. (2011) A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin. Sensors and Actuators A: Physical, Vol.168 (No.1). pp. 66-71. doi:10.1016/j.sna.2011.03.058 ISSN 0924-4247.
Higher Education Funding Council for England (HEFCE)
Woodward, David I., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Leigh, Simon J. (2015) Additively-manufactured piezoelectric devices. Physica Status Solidi (a), 212 (10). pp. 2107-2113. doi:10.1002/pssa.201532272 ISSN 0031-8965.
Research Councils UK (RCUK)
Barker, Ian A., Ablett, Matthew P., Gilbert, Hamish T. J., Leigh, Simon J., Covington, James A., Hoyland, Judith A., Richardson, Stephen M. and Dove, Andrew P. (2014) A microstereolithography resin based on thiol-ene chemistry : towards biocompatible 3D extracellular constructs for tissue engineering. Biomaterials Science, 2 (4). pp. 472-475. doi:10.1039/C3BM60290G ISSN 2047-4830.
Royal Society (Great Britain)
Ramadas, Sivaram Nishal, Hunter, Michael, Thornby, John Albert, Purssell, C. P., Leigh, Simon J. and Dixon, Steve M. (2015) Additive manufacture of impedance matching layers for air-coupled ultrasonic transducers. In: 2015 IEEE International Ultrasonics Symposium , Taipei, Taiwan, 21-24 Oct 2015 pp. 1-4. doi:10.1109/ULTSYM.2015.0367
Barker, Ian A., Ablett, Matthew P., Gilbert, Hamish T. J., Leigh, Simon J., Covington, James A., Hoyland, Judith A., Richardson, Stephen M. and Dove, Andrew P. (2014) A microstereolithography resin based on thiol-ene chemistry : towards biocompatible 3D extracellular constructs for tissue engineering. Biomaterials Science, 2 (4). pp. 472-475. doi:10.1039/C3BM60290G ISSN 2047-4830.
Seventh Framework Programme (European Commission) (FP7)
Ramadas, Sivaram Nishal, Hunter, Michael, Thornby, John Albert, Purssell, C. P., Leigh, Simon J. and Dixon, Steve M. (2015) Additive manufacture of impedance matching layers for air-coupled ultrasonic transducers. In: 2015 IEEE International Ultrasonics Symposium , Taipei, Taiwan, 21-24 Oct 2015 pp. 1-4. doi:10.1109/ULTSYM.2015.0367
UK Research Centre in Nondestructive Evaluation (RCNDE)
Woodward, David I., Purssell, C. P., Billson, Duncan R., Hutchins, David A. and Leigh, Simon J. (2015) Additively-manufactured piezoelectric devices. Physica Status Solidi (a), 212 (10). pp. 2107-2113. doi:10.1002/pssa.201532272 ISSN 0031-8965.
This list was generated on Thu Apr 25 01:12:10 2024 BST.