The Library
Browse by Warwick Author
Up a level |
Number of items: 18.
Yuan, Hao, Khan, Muhammad Aurangzeb, Qian, Connie, Reynolds, Neil and Kendall, Kenneth N. (2023) Experimental and numerical investigation of the intra-ply shear behaviour of unidirectional prepreg forming through picture-frame test. Composites Part B: Engineering, 266 . 11036. doi:10.1016/j.compositesb.2023.111036 ISSN 1359-8368.
Fereshteh-Saniee, Nessa, Reynolds, Neil, Norman, Danielle, Qian, Connie, Armstrong, David J., Smith, Paul, Kupke, Richard, Williams, Mark A. and Kendall, Kenneth N. (2022) Quality analysis of weld-line defects in carbon fibre reinforced sheet moulding compounds by automated eddy current scanning. Journal of Manufacturing and Materials Processing, 6 (6). 151. doi:10.3390/jmmp6060151 ISSN 2504-4494.
Qian, Connie, Deshpande, Abhaye, Jesri, Mona, Groves, Richard, Reynolds, Neil and Kendall, Kenneth N. (2021) A comprehensive assessment of commercial process simulation software for compression moulding of sheet moulding compound. In: ESAFORM 2021 : 24th International Conference on Material Forming, Online, 14-16 Apr 2021. Published in: ESAFORM 2021 doi:10.25518/esaform21.2771
Singh, Anubhav, Reynolds, Neil, Keating, Elspeth, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2021) The effect of braid angle on the flexural performance of structural braided thermoplastic composite beams. Composite Structures, 261 . 113314. doi:10.1016/j.compstruct.2020.113314 ISSN 0263-8223.
Singh, Anubhav, Reynolds, Neil, Keating, Elspeth, Barnett, Alastair E, Barbour, Steve K and Hughes, Darren J. (2021) Three-point flexural performance of tailor-braided thermoplastic composite beam structures. Composite Structures, 260 . 113521. doi:10.1016/j.compstruct.2020.113521 ISSN 0263-8223.
Khan, Muhammad Aurangzeb, Pasco, Corentin, Reynolds, Neil and Kendall, Kenneth N. (2020) On the validity of bias-extension test method for the characterisation of in-plane shear properties of rapid-cure prepregs. Composite Structures, 246 . 112399. doi:10.1016/j.compstruct.2020.112399 ISSN 0263-8223.
Gupta, Jaipal, Reynolds, Neil, Chiciudean, Teodor and Kendall, Kenneth N. (2020) A comparative study between epoxy and vinyl ester CF-SMC for high volume automotive composite crash structures. Composite Structures, 244 . 112299. doi:10.1016/j.compstruct.2020.112299 ISSN 0263-8223.
Reynolds, Neil, Awang-Ngah, S., Williams, Geraint J. and Hughes, Darren J. (2020) Direct processing of structural thermoplastic composites using rapid isothermal stamp forming. Applied Composite Materials, 27 . pp. 107-115. doi:10.1007/s10443-020-09797-4 ISSN 0929-189X.
Singh, Anubhav, Reynolds, Neil, Carnegie, Craig Robert , Micallef, Christopher, Keating, Elspeth, Winnett, James, Barnett, Alastair E., Barbour, Steve K. and Hughes, Darren J. (2019) A novel route for volume manufacturing of hollow braided composite beam structures. Advanced Manufacturing: Polymer & Composites Science, 5 (4). 224-229 . doi:10.1080/20550340.2019.1680514 ISSN 2055-0340.
Fereshteh-Saniee, Nessa, Reynolds, Neil, Kelly, Catherine A., Wilson, Peter R., Jenkins, Mike J. and Kendall, Kenneth N. (2018) Introducing cryomilling for reliable determination of resin content and degree of cure in structural carbon fibre reinforced thermoset composites. Composites Part A: Applied Science and Manufacturing, 107 . pp. 197-204. doi:10.1016/j.compositesa.2018.01.004 ISSN 1359-835X.
Saniee, Nessa Fereshteh , Reynolds, Neil and Kendall, Kenneth N. (2018) Cryomilling : a critical step for accurate determination of degree of cure and resin content in carbon fibre reinforced thermosetting composites. In: Thermosetting Resins, Berlin, Germany, 25-27 Sep 2018. Published in: Proceedings of the Thermosetting Resins 2018 Conference, 25-27 September 2018, Berlin, Germany pp. 71-73. ISBN 9783000608278.
Khan, Muhammad Aurangzeb, Reynolds, Neil, Williams, Geraint J. and Kendall, Kenneth N. (2015) Processing of thermoset prepregs for high-volume applications and their numerical analysis using superimposed finite elements. Composite Structures, 131 . pp. 917-926. doi:10.1016/j.compstruct.2015.06.056 ISSN 0263-8223.
Goodship, Vannessa, Brzeski, Ian, Wood, B. M., Cherrington, Ruth, Makenji, K. , Reynolds, Neil and Gibbons, G. J. (2014) Gas-assisted compression moulding of recycled GMT : effect of gas injection parameters. Journal of Materials Processing Technology, Volume 214 (Number 3). pp. 515-523. doi:10.1016/j.jmatprotec.2013.10.013 ISSN 0924-0136.
Papadakis, N., Ramirez, C. and Reynolds, Neil (2009) Designing composite wind turbine blades for disposal, recycling or reuse. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 443-457. ISBN 9781845694623
Reynolds, Neil and Pharaoh, Mark W. (2009) An introduction to composites recycling. In: Goodship, V., (ed.) Management, recycling and reuse of waste composites. Oxford, U.K.: Woodhead Publishing Ltd., pp. 3-19. ISBN 9781845694623
Han, Li, Reynolds, Neil, Dargue, I. and Williams, Geraint J. (2009) The effect of specimen dimensions on obtained tensile properties of sheet metals. In: 13th International Conference on Sheet Metal, Birmingham City Univ, Birmingham, England, April 06-08, 2009. Published in: Key Engineering Materials, Vol.410-411 pp. 481-491. doi:10.4028/www.scientific.net/KEM.410-411.481 ISSN 1013-9826.
Weager, Brendon M., Bishop, G. R., Black, A. C., Reynolds, Neil, Pharaoh, M. W., Smith, G. F., Rowe, J., Riley, D. E., Birrell, M. and Donaldson, P. (2007) Development of recyclable self-reinforced polypropylene parts for automotive applications. International Journal of Vehicle Design, Volume 44 (3-4). pp. 293-310. doi:10.1504/IJVD.2007.013645 ISSN 0143-3369.
Goodship, Vannessa, Cain, R. L., Reynolds, Neil and Pharaoh, Mark W. (2003) The WEEE Directive : information and opportunities for plastics recycling. Progress in Rubber, Plastics and Recycling Technology, Volume 18 (Number 3). pp. 161-172. ISSN 1477-7606.
This list was generated on Fri Apr 19 20:49:45 2024 BST.